Technical features Nominal capacity 193l Energy class B XL withdrawal profiles Thermal power 9.5 kW Useful power 8.5 kW Heating time (ΔT= 45°C) 62 min Nominal pressure 8 bar Dimensions (height x diameter) 1540 x 1700 mm General characteristics SGA X Low NOx storage gas water heater. SGA X is the storage gas water heater suitable for floor installations . It is equipped with a large magnesium anode functional to the electrochemical protection of the enamelled steel boiler. SGA X allows the user to adjust the temperature thanks to the knob placed on the front and the fact that it does not require electrical connections makes it easy to install. It is designed for methane gas but at the same time it can be converted to LPG using the nozzle kit included in the package. It is available in capacities of 120-160-200-300 litres. Characteristics: Low NOx: ErP compliant 09/26/2018 Operation without electrical connections Piezo ignition system Enamelled boiler Magnesium anode Prepared for LPG transformable methane gas (nozzle kit included) Operation even at minimum water pressures Gas valve with triple safety MADE IN ITALY Made entirely in Italy. EXTERNAL TEMPERATURE REGULATION It allows the user to choose the temperature that best suits his needs. Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caratteristiche tecniche Modello : SGA X 200 Codice prodotto : 3211166 Alimentazione : Metano/gpl Efficienza energetica Classe di efficienza energetica : B Profilo di prelievo : XL Performance Capacità nominale : 195 litri Potenza termica : 9,5 kW Potenza utile 8,5 kW Tempo di riscaldamento (ΔT= 45°C) : 62 min Pressione nominale : 8 bar Dimensioni e peso Dimensioni (AxLxP) : 1700x495x520 mm Peso : 62,0 Kg Scaldacqua a gas d'accumulo Low NOx Ariston SGA X  SGA X è lo scaldabagno a gas ad accumulo indicato per installazioni a pavimento. E’ dotato di un anodo di magnesio di grandi dimensioni funzionale alla protezione elettrochimica della caldaia in acciaio smaltato. SGA X consente all’utente di poter regolare la temperatura grazie alla manopola posta frontalmente e il fatto che non necessiti di collegamenti elettrici lo rende di facile installazione.Nasce predisposto a gas metano ma allo stesso tempo è trasformabile a gpl mediante il kit ugelli compreso nella confezione.Caratteristiche: Basso NOx : conforme a ErP 26/09/2018 Funzionamento senza collegamenti elettrici Sistema di accensione piezoelettrico Caldaia smaltata Anodo di magnesio Predisposto per gas metano trasformabile gpl , kit ugelli incluso Funzionamento anche a pressioni idriche minime Valvola gas con tripla sicurezza Made in Italy Prodotto interamente in Italia. Regolazione esterna della temperatura Permette all'utente di scegliere la temperatura più adatta alle proprie necessità. Direttiva Ecodesign Dopo lunghissime trattative è stato approvato infatti il regolamento Ecodesign che introduce una nuova etichettatura energetica sugli standard minimi di efficienza per le caldaie. In particolare si prevede una classificazione energetica da A+ a G per gli apparecchi per riscaldamento degli ambienti e da A a G per gli apparecchi per produzione di acqua calda sanitaria. Da qui l’obbligo di installare solo caldaie a condensazione, generatori di calore in grado di recuperare gran parte del calore latente contenuto nei fumi che, altrimenti, andrebbe disperso nel camino come avviene nelle caldaie tradizionali. Il calore recuperato viene ceduto all’impianto di riscaldamento, consentendo di raggiungere un rendimento del 106% contro il 92% della caldaia tradizionale e l’84/85% di un vecchio generatore  tradizionale. L’obbligo di installazione riguarda i produttori di caldaie che non potranno più immettere sul mercato quelle non a condensazione a partire dal 26 settembre 2015. Ciò significa che a partire da questa data, chi vorrà installare una caldaia in casa propria, dovrà installare solo modelli a condensazione. Continuerà ad essere prodotto solo un tipo particolare di caldaia non a condensazione che viene tecnicamente chiamata “a camera aperta” da installare  quando non sia possibile andare a sostituire una vecchia caldaia con una caldaia a condensazione per problemi legati alla canna fumaria collettiva di alcuni edifici multifamiliari. Cos'è l'etichettatura energetica ? I prodotti per il riscaldamento dell'acqua e dell’ambiente rappresentano in Europa circa il 30% del consumo interno di energia.  La progettazione di prodotti eco-compatibili e la promozione delle tecnologie ad alte prestazioni sugli utenti finali nel 2020 determinerà: Un risparmio energetico annuo equivalente a 56 milioni di tonnellate di petrolio, quantificabile al risparmio ottenuto se i sistemi di riscaldamento dell’acqua e dell’ambiente di due nazioni grandi come l'Italia fossero disattivati. Come leggere le etichette energetiche Ci sono diverse etichette, in base al tipo e alle funzioni del prodotto (riscaldamento dell’acqua o solo d’ambiente o di entrambi, e in questo caso l'etichetta deve riportare entrambe le classificazioni). Oltre alla classe energetica, l'etichetta fornisce altre informazioni che potrebbero essere utili per capire quale sia il prodotto con il minor impatto ambientale (ad esempio potenza e consumi in diverse zone climatiche, rumorosità ecc). È possibile aumentare l'efficienza energetica della produzione di acqua calda e del riscaldamento d'ambiente collegando in un sistema più prodotti e accessori. In questo caso occorre predisporre un'etichetta di sistema in aggiunta a quella relativa al singolo prodotto Garanzia prodotto: Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Technical features Nominal capacity 115l Energy class B L withdrawal profiles Thermal power 5.5 kW Useful power 5.12 kW Heating time (ΔT= 45°C) 48 min Nominal pressure 8 bar Dimensions: General characteristics SGA BF X Low NOx: ErP compliant 09/26/2018 Operation without electrical connections Enamelled boiler Magnesium anode Piezo ignition system Prepared for LPG transformable methane gas (nozzle kit included) Coaxial smoke outlet diam. East. 100mm, length. max. 900mm Operation even at minimum water pressures Triple safety valve Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Nominal capacity 155l Energy class B L withdrawal profiles Thermal power 9.5 kW Useful power 8.5 kW Heating time (ΔT= 45°C) 62 min Nominal pressure 8 bar Dimensions (height x diameter) 1290 x 1450 mm General characteristics SGA X Low NOx storage gas water heater. SGA X is the storage gas water heater suitable for floor installations . It is equipped with a large magnesium anode functional to the electrochemical protection of the enamelled steel boiler. SGA X allows the user to adjust the temperature thanks to the knob placed on the front and the fact that it does not require electrical connections makes it easy to install. It is designed for methane gas but at the same time it can be converted to LPG using the nozzle kit included in the package. It is available in capacities of 120-160-200-300 litres. Characteristics: Low NOx: ErP compliant 09/26/2018 Operation without electrical connections Piezo ignition system Enamelled boiler Magnesium anode Prepared for LPG transformable methane gas (nozzle kit included) Operation even at minimum water pressures Gas valve with triple safety MADE IN ITALY Made entirely in Italy. EXTERNAL TEMPERATURE REGULATION It allows the user to choose the temperature that best suits his needs. Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Nominal capacity 155l Energy class B L withdrawal profiles Thermal power 5.5 kW Useful power 5.12 kW Heating time (ΔT= 45°C) 48 min Nominal pressure 8 bar Dimensions: General characteristics SGA BF X Low NOx: ErP compliant 09/26/2018 Operation without electrical connections Enamelled boiler Magnesium anode Piezo ignition system Prepared for LPG transformable methane gas (nozzle kit included) Coaxial smoke outlet diam. East. 100mm, length. max. 900mm Operation even at minimum water pressures Triple safety valve Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less