Sealed chamber water heaters: safety and optimal performance for your bathroom. Compact design, energy efficiency and gas leak protection. Choose from our selection of sealed chamber water heaters to ensure reliable and safe hot water!
Sealed chamber water heaters
CHAFFOTEAUX Chaffoteaux Avenir Plus 16 Eu Methane Gas Water Heater Complete With Smoke Exhaust Kit
NB: SINCE THIS PRODUCT IS DISCONTINUED, THE NEW AVENIR PLUS LNX MODEL WILL BE SHIPPED WHEN STOCKS END GAS WATER HEATER CHAFFOTEAUX AVENIR PLUS SFT 16 EU METHANE - COMPLETE WITH FUME EXHAUST KIT: AVENIR PLUS the gas water heater with 2 - Thermostatic Sealed Chamber Water Heaters guarantees total safety and maximum comfort for the user. Technical specifications Product code: 3632174 Energy label specifications according to the European ErP directive Sanitary energy efficiency Class A Withdrawal profile: XL Description: Model: AVENIR PLUS SFT 16 EU Ignition: electronic flame ionization Type: gas instantaneous water heater with 2 - Sealed chamber water heaters Operating characteristics: Nominal heat input : 31 kW Nominal heat output: 28 kW Supply pressure: 28-30/37 mbar Consumption - Flow rates/hour: 2.4 m3/h Hydraulic characteristics: Minimum/maximum nominal pressure: 0.1/8.5 bar Minimum operating flow: 2 l/min Flow rate with salttermic(t 25C): 16 l/min electrical circuit: Maximum absorbed power: 49 kW Electrical protection type: IPX4D Power supply: METHANE Main features Avenir Plus AVENIR PLUS the gas water heater with 2 thermostatic sealed chamber water heaters guarantees total safety and maximum comfort for the user. The innovative design and compact size simplify use, installation and maintenance. Sanitary comfort Thermostatic: High precision NTC probes to measure the temperature at the cold water inlet and at the hot water outlet. The temperature remains stable even in the presence of variations in the water flow rate. The solar kit with thermostatic valve allows you to connect Avenir Plus to solar systems An ecological solution to save energy. Temperature control via probe. Convenience of installation use Different powers to increase the hot water flow rate (11 and 16 l/min with !t 25, C). Pressure switch for fume control. Versatile: Works perfectly with low hydraulic pressures (0.1 bar). Compatible with solar systems for greater gas savings. 2 - Sealed chamber water heaters of maximum safety for unventilated spaces. Available in 11 and 16 liter versions, natural gas and butane gas. sanitary pressure switch. energy saving and environmentally friendly Final 25% gas consumption reduction thanks to electronic ignition and flame ionization. Additional savings in gas consumption by combining the water heater with our solar systems. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy-intensive sectors: construction For placing on the European market, the eco-design directive (ErP notcome ,© Energy Related Products ,î) imposes a minimum energy efficiency for heating devices for the production of hot water in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labeling of products with a capacity of less than 70 kW will give consumers simple, recognizable information which allows for comparisons on the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and kettles placed on the market from 26 September 2015. It's about me too YES, it affects everyone: professionals and end users The information indicated on the energy label will allow professionals to recommend the right product and individuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label; technical product sheet; system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold together with other additional devices; technical sheet of the system with the parts relating to the products and the system already compiled. Dealer Responsibility First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible; all appliances and/systems are always accompanied by the obligatory technical data sheets; any type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and hot water production must be equipped with the new energy label which will report the energy class and main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL Depending on the type of appliance there are different labels. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also provided in cases where a series of combined appliances is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€469,00
-
RINNAI Rinnai Infinity 28i Gas Water Heater Inside LPG Complete With Smoke Exhaust Kit
Overview NEW RINNAI INFINITY 28I GAS WATER HEATER INTERNAL LPG Cod. REU-VCM2837FFUD-LPG, 2 - Forced draft sealed chamber water heaters, COMPLETE WITH FUME EXHAUST KIT - ErP Energy Class A. Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared upload profile: XL Electricity consumption (kWh/year) and fuel (GJ/year) 8 - 18 Indoor noise levels (dB) 67 Characteristics of heating/DHW operation: Code: REU-VCM2837FFUD-LPG 2 - Forced flow sealed chamber water heaters Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulmax lt 1000 Fine series antifreeze -20C Installation: Internal - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 582x356x235 ; 20 Kgs Methane heat input Min/Max (kW) 2.8/53 Water flow t 25C Max (l/min) 28 Max operating temperature (C) 85 Minimum activation pressure (bar) 0.1 Nominal operating pressure Min/Max (bar) 2.5/10 Electric consumption normal / stand-by / antigel (W) 97 / 2 / 120 LPG version Main features RINNAI GAS WATER HEATER: INFINITY saves infinite comforts Rinnai Infinity is the line of instantaneous GAS* water heaters, with forced flow or otherwise, for professional domestic use, indoors and outdoors, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Gradual temperature selection via the standard remote control energy saving Simplicity of design and installation Compact size Superior performance and absolute security Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled steel-zinc cape Frost, thanks to the standard antifreeze on all appliances (including indoors) The SERIES remote control allows the user to select the desired water temperature with precision to the degree, directly from the point of use (when the tap is opened). RESULT: no need to mix for maximum COMFORT and absolute PROTECTION from the risk of burns. energy savings: Rinnai Infinity eliminates any useless waste and ensures real savings: The gas operation guarantees considerably lower costs than the electric one. Respecting a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent reduction in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers, other heat generators, modulating, solquandserve and solquantserve, to reach the set temperature Domestic range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and the captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home INFINITY 28i NEW INFINITY 28 INSTANTANEOUS GAS-FIRED WATER HEATER Infinity 28 Professional Interrange is an instant domestic hot water producer for indoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled steel casing and standard electronic controls with temperature management and self-diagnosis function. Max operating temperature equal to 85 C. Comfort and Economy The new Rinnai Infinity 28i and 28e water heaters (codes REUVCM2837FFUD for internal use REU-VCM2837WD for external use) have the ability to manage an external circulator (optional) in domestic systems equipped with a domestic hot water recirculation ring, to immediately supply hot water to the place of use, according to two modes of operation: "Economy" (factory setting) which aims at maximum savings in consumption thanks to less frequent switching on of the pump, at regular intervals from about 30 to 70 minutes. "Comfort" which guarantees maximum well-being even in systems in which poor insulation of the water circuits is assumed, therefore greater thermal dispersions, with more frequent pump ignition cycles, at intervals from about 15 to 30 minutes. Antifreeze Standard antifreeze system (also on indoor appliances) up to -20C. Status monitor Control panel The Infinity 28s feature a front panel statpost monitor, which displays operating temperature and fault codes. Up to 4 remote controls can be connected to the appliance (of which add to the dashboard for the internal model) offering the following options: temperature control directly from the room of use self-diagnosis additional functions with "de luxe" controls for kitchen bathrooms Cascade connections In addition to the previous management and control systems for cascade appliances (REU-MSB-MB boards), the new Infinity 28 is equipped with a connector for connection to a Building Management System (REU-OPU) which allows error signals to be remoted. ERP extension Rinnai's commitment to a sustainable future. For this reason, all our products are "ERP Ready" or in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-design. The Directive establishes very precise reference points for the manufacture of environmentally friendly products and defines the mandatory minimum requirements of energy and environmental performance for energy-consuming instruments. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energy on final consumption of 20% From 26 September 2015, appliances for winter air conditioning and the production of domestic hot water are accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD Labeling Directive (2010/30/EC) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to give its contribution to an eco-sustainable world Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€1.610,00 - €1.650,00
-
VAILLANT Vaillant Turbomag Plus 11-2/0-5 Methane Gas Water Heater Complete With Smoke Exhaust Kit New
Technical features ErP energy class: Class A Nominal heat output: 21.3 kW DHW direct withdrawal range ΔT = 25°C: 2.5 - 11 l/min Forced draft sealed chamber Ignition: electronic Compact dimensions (HxDxL): 600x183x385 mm Power supply: METHANE General characteristics turboMAG plus Extremely compact dimensions Wide modulation range Perfect dispensing temperature stability Design and intuitive touch screen Energy efficiency class up to A depending on the model. Domestic hot water Instantaneous forced draft water heaters, with electronic ignition with wide modulation range and extremely compact dimensions: among the smallest on the market The turboMAG plus water heaters guarantee plenty of hot water immediately, always at a constant temperature and maximum operational safety. Precisely safety is the added value of this range of water heaters. The Vaillant research and development team, which has been focused on ensuring leadership in the sector for over 140 years, has developed turboMAG plus with the target of safety: in fact, 26 control to ensure maximum user reliability. The new turboMAG plus are water heaters equipped with a three-stage combustion system which broaden the modulation range ensuring perfect temperature stability during hot water delivery. A new exchanger raises the performance of the water heater which, in the 11 – 14 – 16 liters per minute versions, offers a flexible choice for every user. turboMAG plus allows 360° installation flexibility: inside apartments and also outside, resisting temperatures down to -15°C (thanks to the antifreeze accessory) and rain (IPX5D approval). A solar kit as an accessory also allows you to pre-heat the incoming water, further reducing gas consumption. turboMAG plus (hot water production) is the new version of forced draught water heaters with DHW flow rates of: 11, 14 and 16 litres/minute running on Natural Gas and LPG. Quality Continuous development since 1874: Vaillant has been accredited for its superior quality Careful selection of components that meet the highest requirements and guarantee perfect functionality Modern Design: The well-designed casing with high-quality appearance that fits perfectly into your home Total safety: 26 safety functions guarantee the functioning of the appliance Water heater interface with touch screen (IMD): Display with maximum water protection IPX5D protection : Tested with water jets up to a maximum of 12.5 l/min from all directions Flexible and efficient Exchanger with high efficiency: Water heating with minimum gas consumption and lower bill consumption Burner with high modulation : Precise regulation of the thermal power in relation to the DHW request Reduced noise thanks to fan modulation : between 2,400 and 4,800 rpm Various DHW production profiles (bath or shower): - Bath filling mode: monitoring of the filling volume - Normal: temperature setting 38-60 °C Simplified replacement: Same flue position and wall bracket, Reduced installation times High comfort 11, 14 & 16 liters of DHW production High modulation 1:4 Maximum temperature stability in DHW supply : Avoid unwanted temperature variations 3 level combustion : High modulation range 25-100% How to be ready for the new EU legislation Ecodesign Directive (ErP) 2015 What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed. ErP and ELD: what do they mean and how are they different? ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: - Category 1 includes space heating appliances; in particular: electrical, gas and diesel appliances such as boilers, heat pumps and cogenerators. - Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel such as water heaters, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres. ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, the energy classification of the system can be increased, which will be calculated by the installer and indicated on the package label. When and how will the new rules apply? On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products What do the new rules mean for the end customer? Unlike household appliances, energy labels on heating and domestic hot water products and systems can only offer a first orientation and will not necessarily provide the best solution for a certain type of installation, nor will they give indications on the assumed cost of energy when obtains a high energy classification. For example, it is not said that a heat pump which presumably will have a higher efficiency class than a condensing boiler can then actually be used in a given type of building. This is why the advice of a competent technician is still necessary to understand the label and select the best product or system that best meets the needs of your building. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€484,00
-
Riello Riello Mini 17 Ln Low Nox Sealed Chamber Water Heater Complete With LPG Fume Exhaust Kit
Riello Mini 17 LN Low NOx sealed chamber water heater complete with LPG fume exhaust kit Typology: Forced Draft Sealed Chamber; Model: Mini 17 LN; Sanitary energy efficiency class: A; Sanitary load profile: L; Power supply: LPG Daily gas consumption: 15,175 kW/h; Sanitary Energy Efficiency: 80.2%; Annual gas consumption: 11 GJ; Emissions of nitrogen oxides (Nox): 33 mg/kWh; Hot water production Δt=30°: 13.3 litres/min; Nominal heat input: 30.0 kW; Nominal thermal power: 27.90 kW; Min/max withdrawal range: 2.5/13 litres/min; Min/max pressure: 0.2/10.0 bar; DHW temperature selection range: 36-65°C ; Supply voltage: 230/50V/Hz; Electrical protection degree: IPX4D; Dimensions: (H×W×D) 640×400×240 mm;Weight: 21 kg; Water/gas connections: 1/2” – 3/4″ Ø; RIELLO MINI From RIELLO technological research comes MINI LN, the new line of low-emission instantaneous water heaters with sealed chamber, completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with recent European regulations to reduce NOx emissions. The new aesthetic, elegant and linear, and the compact dimensions, allow the integration of this product in any living environment. This feature represents the ideal solution for responding to any domestic hot water production need. Prepared for installation inside the home, the new water heaters can also be installed outside, in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10° c. Latest generation burner with reduced NOx emissions The new RIELLO MINI LN line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or less than 56 mg /kWh. The innovative hyperstoichiometric type burner allows the flame to be fed by a greater air-gas mixture than that required for combustion, resulting in a very low flame temperature. This characteristic, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors international. The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The technology and the advantages of the range Innovative hyperstoichiometric and cooled burner with low emissions Wide flame modulation which allows excellent stability of the domestic hot water delivery temperature, even with minimum withdrawals Electronic ignition and ionization flame control Wide flame modulation (1 : 3) which allows perfect stability of the domestic hot water delivery temperature, even with minimum withdrawals Brand new user interface with backlit display with icons and 4 keys, to easily navigate the menu and make adjustments Abundant domestic hot water production: 11, 13 or 17 litres/min Even more compact dimensions and simple installation Mounting template and power cable supplied. Instantaneous sealed chamber water heater with methane and LPG versions Many new functions in a linear and modern design new RIELLO Mini LN are characterized by the new electronics which, combined with the modern and linear design, results in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40x60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€560,00
-
Ariston Ariston Gas Water Heater Model Next Evo X 11 Liters Methane Nox Low With Smoke Kit - New Erp
Technical features Power kW 11 Gas category II2H3B/P Type C13-C33 NOx emissions 45 mg/kWh Nominal thermal power 22 kW Minimum thermal power 7 kW Modulation range 1:3 Nominal heat input 19.5 kW Minimum heat input 6.3 kW Maximum nominal pressure 10 bar Minimum operating pressure 0.1 bar Minimum operating flow 3.2 l/min Flow rate with temperature difference (Δt) 25 °C 11 l/min Supply voltage (Freq. 50 HZ) 230 V Maximum absorbed power 33 W Sound power 58 dB(A) Protection type IPX4 Weight 13kg Energy class A M pick profile NEXT EVO X It is the new instantaneous Low NOx sealed chamber gas water heater, characterized by an exclusive design, small dimensions and a new intuitive LCD display which makes it easier to adjust the water temperature. Low NOx: ErP compliant 09/26/2018 Ultra compact: only 16.5 cm deep Temperature control via NTC probes at the inlet and outlet of the exchanger Flame ionization electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.2 bar Operation even with minimum water flow rates up to 2.5 l/min Can be integrated with solar thermal systems IPX4D electrical protection Internal installation * 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. * 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. * 100% BUILT TO LAST Strong and super resistant materials, components and products developed to work in extreme conditions to deliver high-level results with maximum durability High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions. Solar integration Prepared for integration with a solar thermal system. Electronic temperature control Electronic control panel for easier and more immediate use. Led Display Multi-function LCD display, simple and intuitive. Ultra-thin Extremely small footprint that allows for concealed installation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€417,00
-
Ariston Ariston Gas Water Heater Model Next Evo Sft 16 Eu Gpl Complete With Fume Exhaust Kit
THIS ITEM WILL BE REPLACED WITH THE NEW MODEL NEXT EVO X 16 LT. COD. PRODUCT 3632433 Technical features Product code: 3632165 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: XL profile Characteristics of heating/DHW operation: Category II 2H3P Nominal thermal power kW 28 Minimum thermal power kW 5.4 Modulation range 6 - 31.0 Nominal heat input kW 31 Maximum nominal pressure 8.5 bar Minimum operating pressure 0.1 bar Minimum operating flow l/min > 2.0 Flow rate (ΔT 25°C) l/min 16.0 Flow rate with temperature difference (Δt) 25 °C l/min 8.5 Supply voltage (Freq. 50 HZ) V 230 Maximum absorbed power W 49 Protection type IPX4D Power supply: LPG General characteristics Next Evo EU The sealed chamber instantaneous water heater Ariston launches Next Evo , the new instantaneous gas water heater for the production of domestic hot water. Characterized by an exclusive design, reduced dimensions and new functions, Next Evo is even more efficient and easy to use. The innovative electronic control of Next Evo allows you to adjust, via an intuitive LCD display, the ideal temperature for the user and to keep it constant even when the required water flow varies, thanks to the two NTC probes which measure the temperature of the both incoming and outgoing water. The central position of the smoke outlet and the extremely reduced depth (only 17.5 cm) make it extremely flexible and easy to install. Maximum energy saving is ensured by the possible integration of Next Evo with natural and forced circulation thermal solar systems: the solar kit with thermostatic valve has been designed precisely to facilitate its implementation. A new, innovative way of conceiving solar integration: versatile, practical and easy to install Characteristics: Ultra compact: only 17.5 cm deep Thermostatic: modulating temperature control via NTC probes allowing high standards in terms of energy saving and comfort Flame ionisation electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.1 bar Operation even with minimum water flow rates > 2 l/min Can be integrated with solar thermal systems Presence of the smoke pressure switch Presence of the water flow switch IPX4D electrical protection Ecodesign Directive After very long negotiations , the Ecodesign regulation was approved which introduces a new energy labeling on the minimum efficiency standards for boilers. In particular, an energy classification from A+ to G is envisaged for space heating appliances and from A to G for domestic hot water production appliances. Hence the obligation to install only condensing boilers, heat generators capable of recovering a large part of the latent heat contained in the fumes which, otherwise, would be dispersed in the chimney as occurs in traditional boilers. The recovered heat is transferred to the heating system, allowing to reach an efficiency of 106% against 92% of the traditional boiler and 84/85% of an old traditional generator. The installation obligation concerns boiler manufacturers who will no longer be able to place non-condensing ones on the market starting from 26 September 2015 . This means that starting from this date, anyone wishing to install a boiler in their own home will only have to install condensing models. Only a particular type of non-condensing boiler will continue to be produced which is technically called "open chamber" to be installed when it is not possible to replace an old boiler with a condensing boiler due to problems related to the collective flue of some multi-family buildings . What is Energy Labeling? Products for heating water and the environment represent around 30% of internal energy consumption in Europe. Designing eco-friendly products and promoting high performance technologies to end users in 2020 will lead to: An annual energy saving equivalent to 56 million tons of oil, quantifiable to the savings obtained if the water and environmental heating systems of two large nations such as Italy were deactivated. As of 26 September 2015, ErP regulation and energy labeling will be applied in Europe to water and space heating products (boilers, heat pumps, micro-CHP devices, water heaters, and water storage tanks hot)¹. How to read energy labels There are different labels, based on the type and functions of the product (water heating or space heating only or both, and in this case the label must show both classifications). In addition to the energy class, the label provides other information that could be useful for understanding which product has the least environmental impact (for example power and consumption in different climatic zones, noise, etc.). It is possible to increase the energy efficiency of hot water production and space heating by connecting several products and accessories in one system. In this case it is necessary to prepare a system label in addition to that relating to the single product Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€487,00
-
BERETTA Gas Water Heater Beretta Idrabagno Lx 17 Lt Gpl Complete With Low Nox Fume Kit - New Erp
Gas water heater Beretta Idrabagno LX 17 l LPG Complete with Low NOx Fume Kit - New ErP LPG code: 20143038 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: XL Sanitary energy efficiency (ηwh) % 82 Daily gas consumption (Qfuel) kW/h 24,225 Annual gas consumption (AFC) GJ 18 Daily electricity consumption (Qelec) kWh 0.082 Annual electricity consumption (AEC) kWh 18 Sound power level indoors (LWA) dB(A) 51 Emissions of nitrogen oxides (Nox) mg/kWh 40 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 13.2 Nominal heat input (G20-G30-G31) kW 30.00 Nominal thermal power (G20-G30-G31) kW 27.60 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar - / 37 Gas connection Ø 3/4" 3/4" 3/4” Smoke temperature (max-min) G20 / G30 / G31 °C 135-72 / - / 137-71 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX4D Dimensions and weight Dimensions (H×W×D) mm 640×400×246 Net weight kg 21 IDRABAGNO LX: INNOVATION IS AT HOME The new line of LOW NOx indoor water heaters From Beretta's technological research comes IDRABAGNO Lx, the new line of instantaneous water heaters with very low emissions , completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with the recent European regulations on NOx. The wide range of IDRABAGNO Lx, made up of 3 sealed chamber models of 11, 13 and 17 l, with both methane and LPG codes, thanks to the new, elegant and linear aesthetics and compact dimensions, integrates perfectly into every living environment, representing the ideal solution to meet every domestic hot water production need. Ideal for installation inside the home, the new water heaters, in the 11 and 13 L versions, can also be installed outside , in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10°C for the 11 and 13 liter models, and -7°C for the 17 liter model. The new IDRABAGNO Lx line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/ kWh. Thanks to the innovative Idrabagno Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. Lots of new features Simple and intuitive interface with icon language Large backlit display and 4 command keys Special functions and self-diagnostics on display Latest generation burner Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€555,00 - €565,00
-
RINNAI Rinnai Infinity 28i Gas Water Heater Internal Methane Complete With Smoke Exhaust Kit
Overview NEW GAS WATER HEATER RINNAI INFINITY 28I INTERNAL METHANE Cod.REU-VCM2837FFUD-NG, 2 - Sealed Chamber Water Heaters WITH FORCED DRAFT, COMPLETE WITH FUME EXHAUST KIT - ErP Energy class A Technical specifications Energy label specifications according to the European ErP directive Sanitary Energy Efficiency ACS: Class A Declared upload profile: XL Electricity consumption (kWh/year) and fuel (GJ/year) 8 - 18 Indoor noise levels (dB) 67 Characteristics of heating/DHW operation: Code: REU-VCM2837FFUD-NG 2 - Forced flow sealed chamber water heaters Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulmax lt 1000 Fine series antifreeze -20C Installation: Internal - Villa - Apartment with multifunctional shower/whirlpool and professional installations Dimensions: mm 582x356x235 ; 20 Kgs Methane heat input Min/Max (kW) 2.8/53 Water flow t 25C Max (l/min) 28 Max operating temperature (C) 85 Minimum activation pressure (bar) 0.1 Nominal operating pressure Min/Max (bar) 2.5/10 Electric consumption normal / stand-by / antigel (W) 97 / 2 / 120 METHANE version Main features RINNAI GAS WATER HEATER: INFINITY saves infinite comforts Rinnai Infinity is the line of instantaneous GAS* water heaters, with forced flow or otherwise, for professional domestic use, indoors and outdoors, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Gradual temperature selection via the standard remote control energy saving Simplicity of design and installation Compact size Superior performance and absolute security Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled steel-zinc cape Frost, thanks to the standard antifreeze on all appliances (including indoors) The SERIES remote control allows the user to select the desired water temperature with precision to the degree, directly from the point of use (when the tap is opened). RESULT: no need to mix for maximum COMFORT and absolute PROTECTION from the risk of burns. energy savings: Rinnai Infinity eliminates any useless waste and ensures real savings: The gas operation guarantees considerably lower costs than the electric one. Respecting a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent reduction in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers, other heat generators, modulating, solquandserve and solquantserve, to reach the set temperature Domestic Range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and the captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home INFINITY 28i NEW INFINITY 28 INSTANTANEOUS GAS-FIRED WATER HEATER Infinity 28 Professional Interrange is an instant domestic hot water producer for indoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled steel casing and standard electronic controls with temperature management and self-diagnosis function. Max operating temperature equal to 85 C. Comfort and Economy The new Rinnai Infinity 28i and 28e water heaters (codes REUVCM2837FFUD for internal use REU-VCM2837WD for external use) have the ability to manage an external circulator (optional) in domestic systems equipped with a domestic hot water recirculation ring, to immediately supply hot water to the place of use, according to two modes of operation: "Economy" (factory setting) which aims at maximum savings in consumption thanks to less frequent switching on of the pump, at regular intervals from about 30 to 70 minutes. "Comfort" which guarantees maximum well-being even in systems in which poor insulation of the water circuits is assumed, therefore greater heat dispersions, with more frequent pump ignition cycles, at intervals from about 15 to 30 minutes. Antifreeze Standard antifreeze system (also on indoor appliances) up to -20C. Status monitor Control panel The Infinity 28s feature a front panel statpost monitor, which displays operating temperature and fault codes. Up to 4 remote controls can be connected to the appliance (of which add to the dashboard for the internal model) offering the following options: temperature control directly from the room of use self-diagnosis additional functions with "de luxe" controls for kitchen bathrooms Cascade connections In addition to the previous management and control systems for cascade appliances (REU-MSB-MB boards), the new Infinity 28 is equipped with a connector for connection to a Building Management System (REU-OPU) which allows error signals to be remoted. ERP extension Rinnai's commitment to a sustainable future. For this reason, all our products are "ERP Ready" or in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-design. The Directive establishes very precise reference points for the manufacture of environmentally friendly products and defines the mandatory minimum requirements of energy and environmental performance for energy-consuming instruments. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energy on final consumption of 20% From 26 September 2015, appliances for winter air conditioning and the production of domestic hot water are accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD Labeling Directive (2010/30/EC) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to give its contribution to an eco-sustainable world Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€1.610,00 - €1.650,00
-
BERETTA Gas Water Heater Beretta Idrabagno Lx 17 Lt Methane Complete With Low Nox Fume Kit - New Erp
Gas water heater Beretta Idrabagno LX 17 l Methane Complete with Low NOx Fume Kit - New ErP CNG code: 20143037 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: XL Sanitary energy efficiency (ηwh) % 82 Daily gas consumption (Qfuel) kW/h 24,225 Annual gas consumption (AFC) GJ 18 Daily electricity consumption (Qelec) kWh 0.082 Annual electricity consumption (AEC) kWh 18 Sound power level indoors (LWA) dB(A) 51 Emissions of nitrogen oxides (Nox) mg/kWh 40 Characteristics Typology - sealed chamber Draft - forced draft Ignition - ion (electric) Flame control - by ionization Flame modulation - electronic Hot water flow rate Δt=30°C litres/min 13.2 Nominal heat input (G20-G30-G31) kW 30.00 Nominal thermal power (G20-G30-G31) kW 27.60 Waterfall DHW temperature selection range °C 36 - 65 Minimum / nominal / maximum pressure bar 0.2 / 2 / 10 Ø 1/2" water connections Gas Nominal gas supply pressure (G20) mbar 20 Nominal LPG supply pressure (G30/G31) mbar - / 37 Gas connection Ø 3/4" 3/4" 3/4” Smoke temperature (max-min) G20 / G30 / G31 °C 135-72 / - / 137-71 Electrical values Absorbed power W 41 Supply voltage V/Hz 230/50 Electrical protection degree - IPX4D Dimensions and weight Dimensions (H×W×D) mm 640×400×246 Net weight kg 21 IDRABAGNO LX: INNOVATION IS AT HOME The new line of LOW NOx indoor water heaters From Beretta's technological research comes IDRABAGNO Lx, the new line of instantaneous water heaters with very low emissions , completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with the recent European regulations on NOx. The wide range of IDRABAGNO Lx, made up of 3 sealed chamber models of 11, 13 and 17 l, with both methane and LPG codes, thanks to the new, elegant and linear aesthetics and compact dimensions, integrates perfectly into every living environment, representing the ideal solution to meet every domestic hot water production need. Ideal for installation inside the home, the new water heaters, in the 11 and 13 L versions, can also be installed outside , in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10°C for the 11 and 13 liter models, and -7°C for the 17 liter model. The new IDRABAGNO Lx line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or lower than 56 mg/ kWh. Thanks to the innovative Idrabagno Lx burner, of the hyperstoichiometric type, the flame is fed by an air-gas mixture in excess of that required for combustion, resulting in a very low flame temperature. This feature, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by international legislation with flying colors . The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. Lots of new features Simple and intuitive interface with icon language Large backlit display and 4 command keys Special functions and self-diagnostics on display Latest generation burner Water-cooled hyperstoichiometric burner Wide flame modulation High heat output, maximum sanitary comfort Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€555,00 - €565,00
-
Riello Occasions Area Riello Mini 17 Ln Low Nox Sealed Chamber Water Heater Complete With Methane Coaxial Fume Exhaust Kit
ATTENTION THE PRODUCT IS NEW AND 100% WORKING, BUT IT HAS DENT ON THE FRONT AND SIDE (SEE PHOTO NEXT TO THE MAIN IMAGE) Riello Mini 17 LN Low NOx sealed chamber water heater complete with methane fume exhaust kit Typology: Forced Draft Sealed Chamber; Model: Mini 17 LN; Sanitary energy efficiency class: A; Sanitary load profile: L; Power supply:METHANE (G20/21); Daily gas consumption: 15,175 kW/h; Sanitary Energy Efficiency: 80.2%; Annual gas consumption: 11 GJ; Emissions of nitrogen oxides (Nox): 33 mg/kWh; Hot water production Δt=30°: 13.3 litres/min; Nominal heat input: 30.0 kW; Nominal thermal power: 27.90 kW; Min/max withdrawal range: 2.5/13 litres/min; Min/max pressure: 0.2/10.0 bar; DHW temperature selection range: 36-65°C ; Supply voltage: 230/50V/Hz; Electrical protection degree: IPX4D; Dimensions: (H×W×D) 640×400×240 mm;Weight: 21 kg; Water/gas connections: 1/2” – 3/4″ Ø; RIELLO MINI From RIELLO technological research comes MINI LN, the new line of low-emission instantaneous water heaters with sealed chamber, completely renewed in design, both aesthetic and functional, able to offer maximum sanitary comfort in compliance with recent European regulations to reduce NOx emissions. The new aesthetic, elegant and linear, and the compact dimensions, allow the integration of this product in any living environment. This feature represents the ideal solution for responding to any domestic hot water production need. Prepared for installation inside the home, the new water heaters can also be installed outside, in a partially protected place, with the addition of the antifreeze kit (available as an accessory) up to a temperature of -10° c. Latest generation burner with reduced NOx emissions The new RIELLO MINI LN line is able to satisfy the most demanding requirements in terms of low emissions which will come into force from September 2018 as required by Regulation (EU) 814/2013 which requires emissions of nitrogen oxides equal to or less than 56 mg /kWh. The innovative hyperstoichiometric type burner allows the flame to be fed by a greater air-gas mixture than that required for combustion, resulting in a very low flame temperature. This characteristic, combined with the cooling of the burner through the water in the water heater circuit, results in a significant lowering of the polluting values of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors international. The high heat input, together with the wide flame modulation (up to 45% of the nominal output) complete the profile of the new burner in terms of performance, offering the user maximum sanitary comfort. The technology and the advantages of the range Innovative hyperstoichiometric and cooled burner with low emissions Wide flame modulation which allows excellent stability of the domestic hot water delivery temperature, even with minimum withdrawals Electronic ignition and ionization flame control Wide flame modulation (1 : 3) which allows perfect stability of the domestic hot water delivery temperature, even with minimum withdrawals Brand new user interface with backlit display with icons and 4 keys, to easily navigate the menu and make adjustments Abundant domestic hot water production: 11, 13 or 17 litres/min Even more compact dimensions and simple installation Mounting template and power cable supplied. Instantaneous sealed chamber water heater with methane and LPG versions Many new functions in a linear and modern design new RIELLO Mini LN are characterized by the new electronics which, combined with the modern and linear design, results in a new control panel, simple and intuitive, with many additional and innovative functions. Through a large backlit digital display (40x60 mm) and 4 command keys, the user can manage all the functions of the water heater and navigate easily in the menu. The icon language of the display makes both the general setting of the appliance and the setting of the special functions particularly intuitive, as well as immediately displaying the diagnostics of any anomalies. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€395,00
-
Savio Sealed Chamber Gas Water Heater Savio Savino He 12s Low Nox Methane Complete With Fume Exhaust Kit
Sealed Chamber Gas Water Heater Savio SAVINO HE 12S Low NOx METHANE Complete with Smoke Exhaust Kit Water heater Plus 12S Nominal heat input (Hi) kW kW 24.00 Maximum water flow rate (increase at 25 °C) kg/min 12.0 Appliance type C 13-33 Maximum water pressure (Pw) bar 10 Minimum water pressure (Pw) bar 0.2 Power supply 230V ~ 50Hz IPX4 electrical protection degree Ignition method Automatic impulse ignition controlled directly from the water opening Destination countries IT G 1/2 gas inlet fitting G 1/2 cold water inlet fitting G 1/2 hot water outlet fitting Diameter of the flue gas exhaust pipe mm Ø 60 x Ø 100 ErP DATA Load profile M Energy efficiency of water heating system (ηWH) % 78 Energy efficiency of water heating system A Daily gas consumption (corrected) kWh 7,836 Daily electricity consumption (corrected) kWh 0.044 Annual electricity consumption AEC (kWh) 140 NOx mg/kWh 47 Internal sound power level (LWA) dB 61 NOx class 6 Product code 10112.1000.0/0 CNG power supply Measures HxWxD 667x345x186 SAVINO Low NOx emission gas wall mounted water heater Available in 12 kW, 14 kW and 16 kW versions with very compact dimensions Energy saving This product features advanced technologies called Strengthened Combustion and Forced Combustion. These two patents make it possible to make the best use of thermal energy with high operating efficiency. Ease of use Thanks to the digital control panel with large display, the user can communicate easily and comfortably with the boiler. Digital control to automatically keep the outlet water temperature constant This function continuously checks the outlet water temperature thanks to a sensor and transfers the data to a microprocessor. The latter adjusts the quantities of gas and water supplied to automatically keep the outlet water temperature constant based on the value set by the user and the actual inlet water temperature. Digital control to automatically keep the outlet water temperature constant This function continuously checks the outlet water temperature thanks to a sensor and transfers the data to a microprocessor. The latter adjusts the quantities of gas and water supplied to automatically keep the outlet water temperature constant based on the value set by the user and the actual inlet water temperature Set the temperature with one touch To set the required temperature, simply touch the digital display. The water temperature can be set between 35°C and 65°C, allowing different needs to be satisfied with maximum ease of use. Multiple security protection This product is equipped with various safety protections, including: • Protection of the self-monitoring system • Auto power off protection, • Overheating protection • Protection from accidental interruption of electricity • Fan failure protection • Protection from electrical overload • Protection against leakage current • Protection from excessive wind pressure • Protection from excessive temperatures • Timed protection “AI” Intelligent Artificial Memory Function When restarted, the gas water heater can operate with the last previously set temperature. No need to set the temperature again - a great practical application of the ergonomics idea. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€405,00
-
RINNAI Rinnai Infinity 17i Gas Water Heater Complete With Smoke Kit Cod. Reu-A1720ffu LPG - New
Water heater Gas water heater RINNAI INFINITY 17i complete with smoke kit cod. REU-A1720FFU LPG - NEW Code REU-A1720FFU Internal installation Device type C Energy class A Load profile L Available versions Natural gas, LPG, propane air Thermal Capacity (kW) min 4.1 / Max 32.40 Hydraulic flow rate (l/min) min 2 l/min MAX 17 l/min (20 l/min ∆T=15°C) Max settable temperature (°C) 65 Minimum activation pressure (bar) 0.1 Nominal operating pressure (bar) min 1 Max 8.30 Ø 60/100 coax flue, max discharge distance 5m+3 bends, divisible Ø 80/80. Male outlet. See the 'accessories' section Max number of additional controls that can be installed 3 Electricity consumption (W) Normal 55 W Stand-by 1.5 W Antifreeze 116 W Predisposition for connection with recirculation yes Arrangement for integration with solar yes Standard antifreeze, down to -15°C Dimensions WxDxH 373x173x541 mm LPG INFINITY The 17 litres/min Infinity 17i water heater is a domestic instantaneous water heater to be installed inside the home. It produces hot water only in response to a real request (only when the tap is opened). Unlike a kettle, it does not need to store large quantities of water at high temperatures. This allows for great savings in terms of energy costs and water consumption . No need to mix the water, which immediately comes out at the desired temperature. NEW The installer can select the "high altitude" setting to ensure maximum performance of the water heater even when installed in the high mountains, in rarefied air conditions NEW When the water heater and the utilities are distant and heat dispersions are generated, the installer can correct the temperature according to the degree of use (from +1°C to +3°C) by perfecting the temperature at the tap NEW A progressive alert signals any limescale deposits. This allows cleaning to be carried out before the level is such as to cause a malfunction. Instantaneous gas-fired domestic hot water producer for indoor installation. Equipped with a control panel on the dashboard for managing the temperature, the degree and self-diagnosis. Anti-corrosion enamelled galvanized steel casing. Characteristics Unlimited hot water without sudden changes in temperature Electronic ignition without pilot flame Temperature control to the degree via the series controller Flow regulator: constant temperature as the flow varies Integrated automatic reset as standard Progressive LC code that detects any limescale deposits Free warranty extension on rinnai.it Functions Can be combined with solar panels Can be combined with recirculation Can be combined with max storage tank lt 500 Max 3 additional remote controls High Altitude Function Ultrathin Standard antifreeze up to -15°C Perfect temperature despite dispersions** Eco friendly Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€900,00 - €920,00
You have seen 60 out of 142 products