Conveniently heat water with our open chamber water heaters. Reliable performance, ease of use and functional design. Choose from our range of open chamber water heaters for an efficient and cost effective option for your bathroom. Buy today and enjoy hot water quickly and conveniently!
Open chamber water heaters
Ariston Ariston Next Evo X Outdoor 22 Eu Methane Gas Water Heater 22 Lt Low Nox
Gas water heater Ariston Next Evo x Outdoor 22 Eu Methane 22 Lt Outdoor Low Nox cod. 362461 NEXT EVO X OUTDOOR 22 EU METHANE 22 l for outdoor use Low NOx - new ErP Technical features Energy efficiency: Class A Load profile: XXL profile Characteristics of heating/DHW operation: Gas category II2H3B/P Type A3 Power Supply: Cable Modulation range 1:5 Nominal heat output: 44 kW Minimum thermal power: 8.5 kW Nominal heat input: 38.3 kW Minimum heat input: 7.6 kW Min/max selectable temperature: 35-65°C Maximum nominal pressure: 10 bar Minimum operating pressure: 0.1 bar Minimum operating flow: 3 l/min Flow rate with temperature difference (Δt) 25 °C: 22 l/min Supply voltage (Freq. 50 HZ) V 230 Minimum ambient temperature of use: -20°C Maximum absorbed power: 40W Sound power dB(A) 61 Protection type IP X5 Dimensions (LxHxP): 394x570x180 mm Weight : 18.5kg Power supply: METHANE Solar integration Thanks to the kit with thermostatic valve, NEXT EVO X OUTDOOR is set up for the integration of solar systems. An ecological solution to avoid waste and increase energy savings Characteristics: Low NOx: ErP compliant 09/26/2018 Temperature control via NTC probes at the inlet and outlet of the exchanger Electronic ignition with flame control Modulation ratio up to 1:5 It does not require a fume exhaust system Standard remote control Minimum operating pressure 0.2 bar Operation even with minimum water flow rates up to 3 l/min Standard antifreeze function: up to -20° IPX5D protection External installation type A3 ANTIFREEZE System that prevents the freezing of the condensation water so that it can operate in heat pump mode even with air at -5 °C HIGH EFFICIENCY Product characterized by high energy performance, reduction of consumption and polluting emissions OUTDOOR INSTALLATION Possibility of outdoor installation thanks to all the weather protection devices. ELECTRONIC TEMPERATURE CONTROL Electronic control panel for easier and more immediate use. SOLAR INTEGRATION Prepared for integration with a solar thermal system. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€624,00
-
RINNAI Rinnai Infinity 20e External LPG water heater
Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: XL Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 10 -18 Characteristics of heating/DHW operation: Part number: REU-VRM2024WD-LPG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 500 Standard antifreeze down to -20°C Installation: Outdoor - Apartment Dimensions: mm 503x356x181 - 15 Kg Natural gas heat input Min/Max (kW) 3.46/39 Water flow Δt 25°C Min/Max (l/min) 20l/min Max operating temperature (°C) 75 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 1.2 / 10 Electricity consumption normal / stand-by / antifreeze (W) 48 / 2 / 74 IPX5D protection Class NOx5 LPG version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic Range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control Outdoor installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.008,00
-
RINNAI Rinnai Infinity 11e external methane water heater
Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: M Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 6 - 6 Characteristics of heating/DHW operation: Code: REU-VRM1120WD-NG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 500 Standard antifreeze down to -20°C Installation: Outdoor - Apartment Dimensions: mm 503x356x181 - 15 Kg Natural gas heat input Min/Max (kW) 2.75/22 Water flow Δt 25°C Min/Max (l/min) 11l/min Max operating temperature (°C) 75 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 1.2 / 10 Electricity consumption normal / stand-by / antifreeze (W) 29 / 2 / 74 IPX5D protection Class NOx5 METHANE version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control Outdoor installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€568,00
-
VAILLANT Gas water heater Vaillant Atmomag Mini I 144/1 14 Lt Low Nox LPG - New
Product name Gas water heater Vaillant ATMOMAG MINI 144/1 14 Lt Low NOx LPG - NEW Technical features Technical data : General 0010022573 Class : A Hot water flow rate: 3.4 / 7.0 Maximum thermal input: 27.7 kW Maximum thermal power: 23.1 kW Water flow rate: 14 l/min Class : NOx 6 Dimensions : HxWxD 680x350x270 mm Power supply: LPG General characteristics AtmoMAG MINI I atmoMAG I are natural draft water heaters with low NOx emissions (class 6) with electronic ignition powered by batteries. A continuous modulation of the flame guarantees limited gas consumption , proportional to the real needs of the user. The ionization flame detection and a control system for cutting off the gas flow ensure maximum operating safety in the event of ignition failure or sudden shutdown. Simplicity of sanitary comfort management is one of the consolidated characteristics of atmoMAG. In the mini version, safety and functionality remain unchanged and the small dimensions become a reason for choice in some housing situations. atmoMAG I mini 114 (hot water production) is the atmospheric version with DHW flow rate of: 11 litres/minute with methane and LPG. atmoMAG I 144 (hot water production) is the atmospheric version with DHW flow rate of: 14 litres/minute with methane and LPG. Simplicity of management Flexible connections supplied Continuous flame modulation Compact size Low NOx emissions (class 6) Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€324,00
-
RINNAI Rinnai Infinity 20e external methane water heater
Technical features Energy label specifications according to the European ErP directive DHW sanitary energy efficiency: Class A Declared load profile: XL Annual consumption of electricity (kWh/annum) and fuel (GJ/annum) 10 -18 Characteristics of heating/DHW operation: Code: REU-VRM2024WD-NG Forced flow open chamber Electronic ignition without pilot flame Can be combined with: solar panels/recirculation/accumulation max lt 500 Standard antifreeze down to -20°C Installation: Outdoor - Apartment Dimensions: mm 503x356x181 - 15 Kg Natural gas heat input Min/Max (kW) 3.46/39 Water flow Δt 25°C Min/Max (l/min) 20l/min Max operating temperature (°C) 75 Minimum activation pressure (bar) 0.1 Min/Max nominal operating pressure (bar) 1.2 / 10 Electricity consumption normal / stand-by / antifreeze (W) 48 / 2 / 74 IPX5D protection Class NOx5 METHANE version RINNAI GAS WATER HEATER: INFINITY infinite savings and comfort Rinnai Infinity is the line of instantaneous GAS* water heaters, with high efficiency forced flow, for domestic and professional indoor and outdoor use, capable of guaranteeing: Unlimited hot water without sudden changes in temperature Temperature selection per degree via the standard remote control Energy saving Simplicity of design and installation Compact size Superior performance and absolute security Free initial testing, carried out by an authorized Rinnai technical assistance centre Furthermore, the external range, thanks to its unique characteristics, ensures total protection from: Wind (up to 90 km/h) Water coming from any direction (even horizontally, with IPX5D protection factor) Corrosion and rust, with the enamelled galvanized steel shell Frost, thanks to the standard antifreeze on all appliances (including indoors) The STANDARD remote control allows the user to select the desired water temperature with accuracy to the degree, directly from the point of use (when the tap is opened). Energy saving: Rinnai Infinity eliminates any useless waste and ensures real savings: Gas operation guarantees considerably lower costs than electric operation. Compared to a traditional boiler, subject to heat loss and energy consumption to constantly heat the water, Infinity produces it instantly at the moment of the real request and exactly at the desired temperature. The advanced technology of the continuously modulating gas valve, which regulates combustion with the utmost precision, guarantees a more efficient and cleaner regime, with a consequent net cut in consumption and polluting emissions. The detection of the inlet water temperature also allows Infinity to work in perfect synergy with solar systems, heating cookers or other heat generators, modulating, only when needed and only as much as needed, to reach the set temperature Domestic range: Superior performance in small denominations The wide domestic range, differentiated in various hydraulic flow rates, allows the user to choose the most suitable appliance for his needs. The compact dimensions and captivating aesthetics also guarantee a harmonious and discreet installation, both inside and outside the home General characteristics INFINITY 11e Infinity 11 outdoor is an instantaneous domestic hot water producer for outdoor installation with electronic temperature management and water flow control. Anti-corrosion enamelled galvanized steel casing and standard control panel with temperature management and self-diagnosis function. Max operating temperature equal to 75° C. Characteristics: Unlimited hot water without sudden changes in temperature Temperature control to the degree via the standard remote control External installation does not require fumes exhaust Flow regulator: constant temperature as the flow varies Electronic ignition without pilot flame Free initial testing, carried out by an authorized Rinnai technical assistance centre ErP Ready Rinnai's commitment is aimed at an eco-sustainable future. For this reason all our products are "ERP Ready" or already in line with the European classification legislation in force since 26 September 2015. ErP, acronym of Energy related Products (products connected to the use of energy), identifies the Directive 2009/ 125/EC aimed at reducing the energy consumption of products through eco-compatible design. The Directive establishes very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements of energy and environmental performance for instruments that use energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central focuses: -increase the energy efficiency of energy-consuming machines by 20% - reduce carbon dioxide (CO2) emissions into the atmosphere by 20% -reach a percentage of renewable energies on final consumption of 20% Since 26 September 2015, appliances for winter air conditioning and domestic hot water production have been accompanied by an energy label. ELD directive: all clear on the label The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The ELD or Labeling Directive ( 2010/30/CE ) in fact provides that each item subject to the ErP Directive is equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power. Rinnai actively participates in these adjustments, happy to make its contribution to a more eco-sustainable world Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.008,00
-
Junkers Bosch Gas Water Heater Junkers Bosch Open Chamber Therm 4300 18-2 18 Liters Methane
Junkers Bosch open chamber gas water heater THERM 4300 18-2 Methane Energy efficiency Open chamber with natural draft Nominal thermal power kW 30.5 Nominal heat input kW 34.5 Minimum thermal power kW 7 Manual power adjustment range kW 7.0 - 30.5 Flow rate of water supplied with ΔT 25 °C l/min 17.6 Maximum working pressure 12 bar Minimum operating pressure 0.2 bar Dimensions Dimensions (H x W x D) mm 655 x 425 x 334 It does not require an electrical connection or additional batteries thanks to the hydrodynamic generator which transforms the flow into electricity Thanks to its technology, it saves up to 25% of gas per year compared to a traditional pilot flame water heater. Water group in 100% recyclable glass fiber reinforced polyamide It is easily adjusted thanks to the intuitive control panel It can be connected directly to solar thermal systems for the production of domestic hot water Characteristics Electronic ignition via Hydrodynamic Turbine Generator (HDG) Continuous flame modulation It works even in case of very low water pressures Extremely compact dimensions
€277,50
-
Ariston Open Chamber Water Heater Ariston Fast Evo X Display Ont 11 Ng Eu Methane Cod. 3632391
Open Chamber Water Heater Ariston FAST EVO X DISPLAY ONT 11 NG Eu Methane Cod.3632391 - Low Nox TECH Technical features: Typology : Open chamber Capacity : 11 litres Class A Load profile : M Gas category: IT - II2HM3+ Maximum thermal capacity: 21.5 kW Minimum heat input: 9.5 kW Maximum thermal power: 19.1 kW Minimum thermal power: 8.4 kW Min-max hot water temperature: 35-65 °C Min-max water pressure: >0.1 / 10 Bar Minimum operating temperature °C +5 Power supply - 2x1.5V LR20 batteries Dimensions HxWxD 580x310x210 The new instantaneous Low NOx open chamber gas water heater available in both CNG and LPG versions. Fast evo x is an instantaneous natural draft gas water heater with a water flow rate of 11 litres/minute. The product is available in the LPG / methane version. Environmentally friendly: in line with the best European standards in terms of polluting emissions. It is equipped with an intuitive control panel with LCD display and guarantees maximum temperature stability thanks to the continuous modulation of the flame and accurate temperature control. Quality and reliability characterize fast evo x ensuring high sanitary comfort. Battery powered Constant hot water at the desired temperature thanks to the unique thermostatic control in the category Operation even at low flow rates and pressures for guaranteed comfort LCD display for optimal water temperature regulation - unique in the category Electronic detection of flame presence for maximum safety ARISTON quality ALWAYS AT YOUR HOME Guaranteed 100% ARISTON Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€227,00
-
Riello Riello Acquafun2 14 methane water heater
Overview RIELLO ACQUAFUN2 14 METHANE WATER HEATER: Open Chamber water heater specifically dedicated to the production of hot water only. Technical specifications Product code: 20019746 Energy label specifications according to the European ErP directive Sanitary energy efficiency: Class A Load profile: profileL Characteristics of heating/DHW operation: Useful power - firebox: 23.7 - 27.2 kW Efficiency at max power: 87.1% Open room, natural draught Min/normal/max pressure bar 0.2/2/10 Camppreliev selector max 40C: 6.7£13.6 l/min Domestic hot water production: 14 l/min Dimensions (hxlxp) mm 650 x 363 x 245 ; 12.6 kgs Power supply: METHANE Features list WATERFUN2 Methane gas LPG Open Room Automatic battery start Acquafun Open Chamber water heater for quick and easy installation without electrical connections thanks to battery power supply. It is available in two models: 11 and 14 litres. Characteristics: Automatic ignition by battery (1.5 Volt). Get rid of tension problems. The continuous flame modulation allows the selected temperature to be kept constant as the pressure and water flow vary, optimizing the combination with mechanical and thermostatic mixers. Economizer device to reduce gas consumption. Supplied battery (1.5 Volt €«¦ size C €«¦ half torch). No mains connection required. The economizer chokes the maximum power by 50% to adapt it to the various installations. Thanks to its particularly compact dimensions, it can be installed in homes with particularly limited spaces. ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of "Energy related Products" and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through a eco-design ("eco-design"). The field of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products for the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitory period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players. The energy labeling of products for heating domestic hot water production The regulations issued require that all products intended for heating and the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new mod to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as products with 4 - Heat Pump Water Heaters, as well as those on air conditioners, the efficiency data reported for the average climatic range. In addition to the product energy labels, European regulations have also provided for the creation of a system label in the case of creating a plant in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); this faculty was also granted to builders. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.
€240,00
-
Junkers Bosch Gas Water Heater Junkers Bosch Open Chamber Therm 4300 14 T4304 14 Liters Low Nox Methane - New
Gas water heater Junkers Bosch Open Chamber THERM 4304 14 Liters Low NOx Methane - News Technical features Model : Therm 4304 Heating Energy Class: A Declared load profile : L Nominal Thermal Power: 23.6 kW Nominal Thermal Capacity: 26.8 kW Max water flow with ΔT 25 °C 13.5 (l/min) Sound power level indoors : 69 dB Efficiency at 100% of nominal heat input: 88% NOx nitrogen oxide emissions : 46 mg/kWh Maximum operating pressure: 12 bar Minimum operating pressure: 0.35 bar Maximum sound pressure : 69 dB(A) Power supply: METHANE Dimensions and weight Dimensions (H x W x D ) : 655 x 425 x 225 mm Weight : 10.8Kg Therm 4304 Therm 4300 low NOx water heater Low emission gas instantaneous water heater with annual gas savings of up to 25% compared to older pilot flame water heaters Environmentally friendly: does not require batteries or electricity for operation Adjust power and consumption to your real needs, reducing waste It allows you to save up to 25% of gas per year compared to a traditional pilot flame water heater, thanks to its particular technology Maximum reliability guaranteed by the triple safety system for cutting off the gas flow in the event of ignition failure or accidental shutdown Advantages Gas savings and optimized consumption Innovative electronic ignition technology using a hydrodynamic turbine generator, for annual gas savings of up to 25% compared to old pilot flame water heaters. The gas consumption of the water heater is adapted to your real needs, thanks to the continuous modulation of the flame Easy to install It does not require electrical connections. It is also designed to minimize NOx emissions and can be combined with solar thermal systems for the production of domestic hot water (using the appropriate accessory) Maximum security Triple safety system made up of the smoke outlet sensor, the temperature limiter and a control device which cuts off the gas flow in the event of ignition failure or accidental shutdown. New design Discover the new elegant and modern design. New rounded aesthetics and intuitive handling thanks to the front display Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€430,00
-
Junkers Bosch Gas Water Heater Junkers Bosch Open Chamber Therm 4204 11 Liters Low Nox LPG - New (Ex Minimaxx) T4204
Gas water heater Junkers Bosch Open Chamber THERM 4204 11 Liters Low NOx LPG - News Technical features Model : Therm 4204 Typology : Open chamber with natural draft Heating Energy Class: A Declared load profile : M Minimum / Nominal Thermal Power: 10.6 / 17.4 kW Minimum / Nominal Heat Capacity: 12 / 19.8 kW Modulation range : 10.6 - 17.4 kW Max water flow with ΔT 25 °C 10.0 (l/min) Sound power level indoors : 69 dB Daily fuel consumption : 8.938 kWh Efficiency at 100% of nominal heat input: 88% NOx nitrogen oxide emissions : 35 mg/kWh Maximum operating pressure: 12 bar Minimum operating pressure: 0.35 bar Maximum sound pressure : 69 dB(A) Power supply: LPG Dimensions and weight Dimensions (H x W x D ) : 655 x 310 x 225 mm Weight : 10.8Kg Therm 4204 Low emission instantaneous gas water heater with triple safety system Triple security system Battery powered, no mains connection required Adaptation of gas consumption on the basis of real needs New elegant rounded design Advantages Maximum security Triple safety system consisting of the smoke exhaust sensor, the temperature limiter and a control device which cuts off the gas flow in the event of ignition failure or accidental shutdown Optimized consumption The gas consumption of the water heater is adapted to your real needs, thanks to the continuous modulation of the flame Easy to Install The Therm 4204 water heater does not require electrical connections as it is battery powered. It is also designed to minimize NOx emissions and can be combined with solar thermal systems for the production of domestic hot water (using the appropriate accessory) New Design Discover the new elegant and modern design. New rounded aesthetics and intuitive handling thanks to the front display Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€272,00
-
Junkers Bosch Gas Water Heater Junkers Bosch Open Chamber Therm 4000 10 Liters Low Nox LPG T4004 - New
Gas water heater Junkers Bosch Open Chamber THERM 4000 10 Liters Low NOx LPG T4004 - NEW Technical features Product data T4004 10 31 Water heating energy efficiency class A Declared load profile M NOx nitrogen oxide emissions (mg/kWh) 28 Sound power level inside LWA [dB(A)] 58 Technical data Technical data T4004 10 Version [kW] Natural gas(1), LPG(2) Nominal thermal power (Pn) [kW] 17.4 Minimum rated heat output (Pmin) [kW] 7.9 Nominal heat input (Qn) [kW] 19.8 Minimum nominal heat input (Qn,min) [kW] 9 Power modulation range (Pn,min-Pn) [kW] 7.9 - 17.4 Flow rate of water supplied with ?T 25 °C [l/min] 10 Efficiency at 100% of nominal heat input (?u,Hi,100%) [%] 88 Efficiency at 30% of nominal heat input (?u,Hi,100%) [%] 88 Maximum operating pressure allowed (pW,max) [bar] 12 Height (mm) 580 Width (mm) 310 Depth (mm) 225 Therm 4000 Instant gas water heater with low emissions available in 10 l/min methane and LPG version Bosch quality and efficiency thanks to the triple safety system and continuous flame modulation Excellent value for money with European production No electrical preparation required thanks to battery power supply Elegant and compact design (only 58 cm in height) Bosch quality and efficiency The Therm 4000 gas water heater guarantees maximum operating safety, thanks to the triple safety system consisting of the smoke outlet sensor, the temperature limiter and a control device which cuts off the gas flow in the event of ignition failure or accidental shutdown. The continuous modulation of the flame also allows this water heater to adapt to real needs. Compact and elegant design Available in methane and LPG versions, the Therm 4000 water heater adapts to any context, thanks to its elegant design and compact dimensions (only 58 cm in height). Furthermore, it does not require any electrical preparation thanks to the battery power supply. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€216,00
-
BAXI Open Chamber Water Heater Baxi Acquaprojet+ Blue 11i Low Nox Methane - New Acquaproject
Open chamber water heater BAXI Acquaprojet+11i Blue Low NOx A7698573 natural draft - NEW Product code: A7698573 Energy label specifications according to the European ErP directive Energy efficiency Class A Load profile M Technical specifications Instantaneous gas water heaters Open chamber with natural draft Maximum thermal power kW 19.4 Hot water production ∆T=25°C: 11 l/min Battery electronic ignition Dimensions (hxwxd) mm 620x314x245; 11.8kg Natural gas supply AQUAPROJET BLUE Baxi offers a new range of instantaneous gas water heaters, designed to guarantee, in compact dimensions, high sanitary comfort, savings and ease of use. Acquaprojet Blue water heaters are equipped with a dashboard with a simple and essential design: 2 knobs allow you to manage all the functions of the appliance in an easy and intuitive way. The models are equipped with an LCD display for viewing the temperature. Guaranteed savings The Acquaprojet Blue line is equipped with the special Economizer device which allows the hot water temperature to be selected as desired, always supplying it at the same temperature even when the quantity drawn varies. An important gas saving is thus achieved, up to 50%, since the insertion of the device allows to limit the maximum thermal power supplied when the usage requirements are limited (low temperature difference or reduced withdrawal flow rates such as for example in the summer). Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€185,00
You have seen 60 out of 83 products