General characteristics Brand: Dab Model: Esybox Max 60/120 T Code: 60199035 Data sheet Flow rate: Up to 17.4 m3 /h (per single unit) Head: 113 m Type of pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral Liquid temperature: +50°C Maximum ambient temperature: +55°C Maximum inlet pressure: 5 bar Maximum working pressure: 12bar / 1200kPa Constant pressure range: 1-12 bar (3 bar ex factory) Motor protection degree: IP X5 Motor insulation class: F Impeller(s) construction material: Technopolymer Single-phase power supply: 208-240V 50/60Hz Three-phase power supply: 380-480V 50/60Hz Possible type of installation: Fixed, vertical Dimensions and weight HxWxD: 800x400x380 mm Weight: 30Kg Description Integrated pumping system for pressurization in residential, civil and commercial environments. Available in two power sizes, it consists of modular elements that allow different configurations. The system can be housed on single, double or triple connection bases; the double bases can also be combined to obtain a system of four elements. The modular construction allows the pumping groups to be assembled directly on the installation site (OSA concept) The silent operation and compact dimensions allow installation in all environments, even inhabited ones. PUMP CHARACTERISTICS Electronic vertical multi-impeller pump, with display, two pressure sensors (suction and delivery), non-return valve on delivery and integrated expansion. Pump body and impellers in technopolymer with steel jacket. ENGINE FEATURES Water-cooled permanent magnet motor, stainless steel motor jacket. Motor shaft in AISI 303 stainless steel. ELECTRONIC FEATURES The presence of the inverter keeps the pressure constant by varying the number of motor revolutions according to the request. The expansion module (esy I/O, available as an accessory) makes it possible to interface Esybox Max with the other elements of the system (BMS). Integrated protections: protection against dry running, amperometric and abnormal voltages, overtemperature, freezing, anti-blocking and anti-cycling. DCONNECT Thanks to the DConnect app and the integrated wi-fi, it is possible to configure and view the operating parameters on the large Esybox Max display, on the site or remotely with active DConnect service and Internet connection. It is possible to control and manage directly from a smartphone or tablet system pressure, alarms and instantaneous and historic consumption. DSync technology optimizes the user experience of Esybox Max. The installer interfaces with the pump via his smartphone or tablet. it automatically detects the language, time and unit of measure of the place of installation. In case of multiple system, after easy installation is completed of the first pump, the Esybox Max synchronize with each other automatically. DSync allows communication with external systems through the protocol Modbus. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Pedrollo Model: 2CPM 25/130N EAN: 8059173995035 Electric motor: single-phase 230 V - 50 Hz with thermal motor protector incorporated in the winding Description SUCTION 1"1/4 - DELIVERY 1". CAST IRON PUMP BODY. AISI 304 STAINLESS STEEL IMPELLER

Read more less

General characteristics Brand: DAB Model: DABKPS30/16M EAN: 8059893045881 Data sheet: Rated power expressed in horse power: 0.5 hp Rated power expressed in kilowatts: 0.37 kW Absorbed volts: 230V Suction port: 1" Delivery attack: 1" Pump body composition: Cast iron Impeller composition: Brass Engine mount: Cast iron

Read more less

General characteristics Brand: Pedrollo Model: Top Multi 2 EAN: 8058368996772 Article description Pump body in technopolymer reinforced with glass fibre. Impeller in noryl fe1520pw. Motor shaft in aisi 431 stainless steel. 10 meter power cable with scuko plug. 1"1/4 connection.

Read more less

.

Read more less

General characteristics Brand: Habitats Capacity: 24 litres Maximum pressure: 8 bars Description The expansion vessel is a hydraulic element present in domestic heating boilers. It has the function of containing sudden variations in pressure in the circuit, avoiding sudden changes and water hammers, which otherwise would have to be absorbed, with possible damage, by the system.

Read more less

SUCTION 1"1/2 - DELIVERY 1"1/4. AISI 304 STAINLESS STEEL PUMP BODY. NORYL IMPELLER

Read more less

Ebara booster set with 2 horizontal double impeller pumps with cast iron hydraulics and 304 stainless steel manifolds 2GP CDA 100 M 2001150200B WITHOUT TANK AND WITH MONTALIQUIDI ARRANGEMENT General characteristics Brand: Ebara Supplied product model: 2GP CDA 100M Supplied product code: 2001150200B Data sheet Maximum flow rate, m3/h: 10.8 Maximum pumping height: 52m Maximum working pressure: 5.2 bar Maximum liquid temperature: 45°C Suction diameter: G1½ Outlet diameter: G1½ Electrical connection: 230V, single phase Motor power: 0.75 + 0.75 kW Motor type: 2 poles Description Protection and control panel with CE mark: • Very low voltage auxiliary circuit • Switching on and off of the engines by means of two pressure switches • It is possible to connect to floats, or minimum pressure switch, to avoid operation under water shortage conditions aspiration • There is a device that swaps the starting order of the pumps at every request • Diet: - single-phase 230V, 50Hz - three-phase 400V, 50Hz • Direct starting • Power circuit protection fuses • Auxiliary circuit protection fuses • IP 55 degree of protection • Main disconnect switch with door lock • Automatic switches - 0 - man. for each pump • Thermal protection reset • Indicator LEDs: - network presence - engine running - level alarm (if the optional float is installed) - motor protection (only for the three-phase version) • Alarm output setup Units with two horizontal double impeller pumps with cast iron hydraulics. TYPICAL APPLICATIONS The typical applications of the 2GP series booster sets are: • Water supply for distribution networks inherent in the sector of the building service • Water supply for industry in general • Irrigation of gardens, parks and sports fields GROUP EQUIPMENT • Two AGA series pumps with 2-pole asynchronous motor self-ventilated, efficiency class IE2 for three-phase motors starting from 0.75 kW • Switchgear: the system is equipped as standard with a control panel pump alternation control • Operation of the pumps regulated by pressure switches • Wetted parts are corrosion resistant • Base in galvanized steel • Manifolds in galvanized steel and on request AISI 304, AISI 316. I collectors are sized according to the total flow rate of the group pressurization • Shut-off valve on the suction and discharge sides of each pump • Check valve on the suction side of each pump • Pressure gauge, delivery side • Prearranged for delivery side hydroaccumulator vessel connection • Prepared for connecting external air feeders • Prepared for connection of a device against lack of water Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara submersible electric pump with stainless steel body BEST/A 2 MA 1721090021A General characteristics Brand: Ebara Supplied article number: 1721090021A Model of the supplied article: BEST/A 2 MA Cable length: 10m (H07 RN-F) Data sheet Description Electric pump applications: infiltration water handling; emptying of basements, garages and basements; drainage of small and medium-sized construction sites; Type of possible installations: fixed or mobile Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara multistage centrifugal submersible electric pump with stainless steel body IDROGO M 40/08 A 1582031221 with float General characteristics Brand: Ebara Code: 1582031221 Model: IDROGO M 40/08 A Float: Yes Typology: Single-phase Data sheet Description Applications: handling of clear water from wells, cisterns and initial collection tanks; pressurization of domestic systems; small watering; Installation: in horizontal and vertical position Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara double impeller centrifugal electric pump with three-phase C cast iron body da/i 200 T 1210200004I General characteristics Brand: Ebara Code: 1210200004I Model: Cda/i 200 T Typology: three-phase Data sheet Description Application of electric pump: pressurization of electrical systems; small watering handling of non-aggressive liquids for civil and industrial use; washing facilities; vehicle wash. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General characteristics Brand: Lowara Model: Doc7 EAN: 8016935003414 Article description Submersible drainage pump for clear water. Versions with pre-assembled float. Connection 1"1/4. Pump body in stainless steel. Impeller noryl.

Read more less