general characteristics Brand: Pedrollo Model: 3cpm80-C EAN: 8059173998371 Data sheet: Rated power expressed in horse power: 0.6 hp Nominal power expressed in kilowatts: 0.45 kW Absorbed volts: 230V Suction port: 1" Delivery attack: 1" Pump body composition: cast iron Impeller composition: noryl (technopolymer) Description The multi-impeller electric pumps produce a considerable pressure and at the same time a high water flow rate with low energy consumption. Due to their extremely silent operation and excellent hydraulic characteristics, they are used in domestic systems, small sprinkler irrigation, vehicle washing and for the assembly of pressure groups (autoclaves).

Read more less

General characteristics Brand: Pedrollo Code: Vxcm20/50 EAN: 48SGV93B0A1 Article description Pump body in cast iron. Base in AISI 304 stainless steel. Impeller Vortex type in cast iron with cataphoresis treatment. Motor shaft in aisi 431 stainless steel. 10 m power cable with external float. 2"1/2 connection

Read more less

General characteristics Brand: Pedrollo Model: Top 3 EAN: 48TOP13A1 Article description 5m power cable with schuko plug. Standard float. Pump body in technopolymer. Noryl impeller. Motor shaft in stainless steel en 10088-3. 1"1/4 connection. 35mm hose holder

Read more less

General characteristics Brand: Pedrollo Model: TOP MULTI TECH 2 EAN: 8058368996789 Data sheet Liquid type: Clean water Uses: domestic, civil Uses: water supply, pressure boosting systems, irrigation Typology: submarines Family: multi-rotor submarines Performance field Flow rate up to 120 l/min (7.2 m³/h) Head up to 52 m Employment limits Liquid temperature up to +40 °C Depth of use below water level up to 5 m Maximum height between pump and user 10 m Emptying level up to 35 mm from the bottom Continuous duty S1 Other Phase: Single phase Power: 0.55kW // 0.75HP Performance: 10 ÷ 80 Q l/min // 40 ÷ 5 H m Mouths: mand. 1¼" Article description Pump body in technopolymer reinforced with glass fibre. Impeller in noryl fe1520pw. Motor shaft in en10088-3 stainless steel. 10m power cable with schuko plug. 1"1/4 connection. Equipped with an internal electronic device that starts the electric pump following the drop in system pressure below 1.5 bars. TOP MULTI-TECH electric pumps are recommended for pumping clean water and chemically non-aggressive liquids for the materials making up the pump. Due to their high efficiency and reliability, they are suitable for domestic water supply from relatively deep basins, tanks or wells, for drawing rainwater from cisterns for hand watering or feeding an irrigation system, etc. The integrated electronic device allows you to start or stop the electric pump automatically, by opening or closing the tap.

Read more less

MAX CURRENT 8A

Read more less

General characteristics Code: 100004 Model: RS 25/6-3-PR-12CE Brand: Wilo Data sheet Material: Cast iron Wheelbase: 130mm Connections: 1"1/2 Pipe connection: 1" Number of speeds: 3 Description Circulators are devices whose purpose is to push and lead the water inside the radiator circuit or towards the hot water taps. In this case, this product serves for the circulation of the fluid within "HVAC" systems (heating, ventilation and air conditioning)

Read more less

General characteristics Brand: Lowara Model: 5HM10S15T EAN: 104604631 Article description Suction 1"1/4 - delivery 1". Pump body and impeller in AISI 304 stainless steel

Read more less

General characteristics Brand: Pedrollo Model: vxm 10/35-n EAN: 48SGV91A0A1U Article description Pump body in cast iron with cataphoresis treatment. Base in aisi 304 stainless steel. Impeller Vortex type in aisi 304 stainless steel. Motor shaft in stainless steel. With built-in thermal protector in the winding. Power cable 5 meters. With schuko plug. With external float. 1"1/2 connection

Read more less

ATTENTION The electropump is NOT equipped with a capacitor General characteristics Brand: Lowara Model: 4GS11M EAN: 8016935004565 Data sheet Rated power expressed in horse power: 1.5 hp Rated power expressed in kilowatts: 1.1 kW Absorbed volts: 230 v Connection diameter: 1"1/4 Outer jacket composition: stainless steel Impeller composition: technopolymer

Read more less

Technical features Model: DIVER 100 MA single-phase Power supply: 1 x 230V~50Hz Power: 0.75kW (1HP) Capacitor: 20mF Operating range: flow rate up to 80 l/min (4.8 m3/h) with head up to 55 metres. DAB PUMPS  There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics DIVER 5" submersible monobloc multistage electric pumps DIVER electric pumps are used in systems for lifting clear water from wells, first collection tanks or cisterns, Roman wells or streams and are suitable for the distribution of pressurized water in domestic systems, small agriculture, sprinkler irrigation of gardens and vegetable gardens. The pump, particularly silent, used inside wells or tanks avoids all the problems related to suction and deactivation. General characteristics of the series: Operating range: from 0.6 to 12 m3 /h with head up to 96 metres Pumped liquid: clean, without solid or abrasive bodies, non-aggressive Max presence of sand in the water: 50 gr/m3 Liquid temperature range: from 0°C to +35°C Maximum immersion: 20m Delivery port diameter: 1” 1/4 GAS Power Tolerance: +6% / -10% Maximum number of starts: 20/h Motor protection degree: IP 68 Engine protection class: F Installation: in wells, tanks and cisterns, in vertical position. Special executions on request: other voltages and/or frequencies. automatic version with float Construction features of the pump Submersible monobloc multistage pump with the hydraulic part under the motor which is cooled by the pumped liquid. Impellers and diffusers in Noryl reinforced with glass fiber with wear-resistant wear ring in stainless steel. External jacket, stator jacket, upper head with sleeve and closing ring in AISI 304 steel. Encapsulated stator. Cast iron supports. Rotor shaft extension in AISI 304. Motor side lip seal and silicon carbide/silicon carbide mechanical seal on pump side. Engine construction features Two-pole asynchronous type submersible built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L. Squirrel cage rotor mounted on ball bearings, and oversized to guarantee silence, reliability and durability. Upon request, the single-phase version is supplied with the CONTROL BOX. Protection by the user for the three-phase version. Automatic version with float available. The version with support base and side suction (DRY) is available on request. Degree of protection: IP68 Insulation class: F Series voltage: single-phase 230V/50Hz three-phase 400V/50Hz Power cord: H07RN-F detachable, length 10 meters. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL DATA Operating range: from 1 to 32 m3 /h with head up to 23 metres. Pumped liquid: ground water, rain water, clear waste water, black waste water and river or lake water. Maximum liquid temperature: 45°C Installation: Fixed to the floor if inside a building. Inground if outside a building. Not drive-over, but walkable only up to 100 kg CONSTRUCTION FEATURES CAPACITY: 280 l MATERIALS: LLDPE REGULATION: 12050-1 CONNECTIONS: - Inlets DN 50/110 - DN 50 ventilation - G2 output” COMPONENTS INCLUDED: - DSD2" lifting device and anti-rotation bracket for FEKA VS and VX - 4 cable glands for single pump and floats - 2” F x 1 x ¼ M fitting for FEKA 600 - FEKA VS and VX floating cable clamp kit - 2 Floats and alarm float holder COMPONENTS EXCLUDED: - Pump: to be selected according to the possible configurations - Panel: to be selected according to the possible configurations - Overflow alarm float Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

TECHNICAL DATA Operating range: from 1 to 5.4 m3 /h with heads up to 46 metres Pumped liquid: clean, without solid or abrasive bodies, non-aggressive. Liquid temperature range: from 0°C to +35°C Maximum immersion: 12 meters Motor protection degree: IP 68 Engine protection class: F Installation: fixed or portable in vertical position. Operation: manual or automatic with float (continuously with pump totally immersed) Delivery port diameter: 1” Maximum diameter of the pump: 150mm APPLICATIONS Multi-impeller electric submersible pumps ideal for use in rainwater systems and irrigation networks, for pumping water from tanks, ponds and wells and other applications that require high pressure. Available with 2, 3 or 4 impellers. Suitable for pumping clean water. Excellent cooling of the motor which allows the operation of the pump even if only partially submerged. Automatic version equipped with float switch for automatic start and stop of the pump and manual version. Equipped with power cable with plug, non-return valve and 4-level connector. CONSTRUCTION CHARACTERISTICS OF THE PUMP Anti-corrosion and anti-oxidation material. Stainless steel debris filter CONSTRUCTION CHARACTERISTICS OF THE ENGINE Continuous service asynchronous submersible type. Thermal protection against overheating. Anti-wear crankshaft. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less