Wilo submersible electric pump for stationary submerged installation Initial DRAIN 10-7 4168021 General characteristics Brand: Wilo Model: Initial DRAIN 10-7 Code: 4168021 Data sheet Hydraulic data Maximum working pressure PN: 3 bar Impeller Structure Type: Impeller Free spherical passage of the hydraulic system: 5 mm max delivery Qmax: 13.0 m³/h Max head Hmax: 8.6m Fluid temperature min. Tmin: 5 °C max temperature temperature Tmax: 35 °C ambient temperature min. Tmin: 1 °C ambient temperature max. Tmax: 35°C Engine data Mains power supply: 1~230V, 50Hz Voltage tolerance: ±10% Motor rated power: P2 0.37 kW Rated Current: IN 3A Rated speed n: 2800 1/min Power consumption P1 max: 550 W frequency max. of starts t: 60 1/h Connection Type: Direct Online (DOL) Insulation class: F Motor protection degree: IP68 Materials Pump body: PP Impeller: PA-GF30 Shaft: Stainless steel Shaft seal: BQ1PFF Seal material: NBR Motor material: Stainless steel Assembly fee Hose connection on the suction side: - Pipe connection on the pressure side: Rp 1½ Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Grundfos electric pump for clear water drainage completely in stainless steel UNILIFT KP 350 A1 013N1600 General characteristics Brand: Grundfos Supplied model: UNILIFT KP 350 A1 Supplied model number: 013N1600 Data sheet Max flow rate: 3.89 l/s Max head: 9 m Max. Particle: 10mm Model: A Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Stainless steel: EN 1.4301, AISI 304 Installation Ambient temperature limit. 0 .. 50 °C Connection type. Rp Size attack. 1 1/4 inch max. depth installation. 2 m Liquid Liquid temperature range. 0 .. 50 °C Density. 998.2 kg/m³ Electrical data Absorbed power - P1. 720W Network frequency. 50Hz Nominal tension. 1 x 220-230V Rated current. 3.2A Capacitor capacity - gear. 10µF/400V Protection class (IEC 34-5). IP68 Insulation class (IEC 85). f Integrated motor protection. CONTACT Thermal protection. internal Electric cable length. 5 m Cable plug type. SCHUKO Checks Level switch: Float Other Net weight. 7.2kg Gross weight. 7.6kg Packing volume. 0.013 m³ Description Useful to: Wastewater - Commercial buildings Domestic wastewater Industrial waste water Grundfos UNILIFT KP are stainless steel submersible pumps designed for pumping non-aggressive water and gray wastewater such as sewage and domestic sewage with particles up to 10 mm. The pump can be used as a portable unit or fixed installation inside and outside buildings. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical features Model: FEKA VS 550 MA single-phase Power supply: 1 x 230V~50Hz Power: 0.55kW (0.75HP) Capacitor capacity: 20mF Operating range: flow rate up to 300 l/min (18 m3/h) with heads up to 7.4 metres. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics FEKA VS Submersible pumps WASTEWATER LIFTING Submersible pump in stainless steel with vortex impeller in precision cast steel. Suitable for wastewater and residential sewage containing solids up to 50mm in size. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Seal holder cover, motor case, cap with handle in stainless steel. Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Engine construction features Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 Max starts/hour: 20 Series features: Operating range: from 0 to 32 m3/h with head up to 14 metres. Pumped liquid: sewage and used water in general, however non-aggressive. Free passage: 50 mm Liquid temperature range: - from 0°C to +35°C for domestic use (EN 60335-2-41) - from 0°C to +50°C for other uses Maximum ambient temperature for pump operation with the motor surfaced: +40°C Maximum immersion depth: 7 meters Motor protection degree: IP 68 Insulation class: F Series voltage: 220-240V~ 50Hz Single-phase 380-415V~ 50Hz Three-phase Power cable: 10 meters H07RN-F, with plug for the single-phase version Installation: fixed or portable, vertical Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Grundfos submersible single-impeller three-phase electric pump for sewage in stainless steel ap 50b.50.11.3 96004601 WITHOUT SHUKO PLUG General characteristics Brand: Grundfos Model: ap 50b.50.11.3 Code: 96004601 Data sheet Max flow rate: 8.06 l/s Max head: 14 m Impeller type: VORTEX Max. Particle: 50mm Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Steel: stainless steel EN 1.4301 AISI 304 Installation Ambient temperature limit: 0 .. 40 °C Connection type: Rp Size attack: 2 inch max. depth of installation: 2 m Inst. dry/submerged room: S Auto Pairing: Y Liquid Liquid temperature range: 0 .. 40 °C Density: 998.2 kg/m³ Electrical data P1 power input: 1.75 kW Rated power - P2 : 1.31 kW Network frequency: 50Hz Rated Voltage: 3 x 400V Rated Current: 2.81A Cos phi - power factor: 0.90 Rated Drive Speed: 2785rpm Capacitor capacity - run: 16 µF/400 V Protection class (IEC 34-5): IP68 Insulation class (IEC 85): F Integrated motor protection: NONE Thermal protection: external Electric cable length: 5 m Cable plug type: NONE Other Net weight: 11.4kg Gross weight: 13.4kg Description Useful to: Wastewater - Commercial buildings Domestic wastewater Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical features Model Dab Submersible Electric Pump Model Nova Up 600 M-NA For Draining Clear Water For Domestic Use Energy efficiency Operating range: from 1 to 15 m3 /h with heads up to 10 metres. Liquid temperature range: from 0°C to +35°C for domestic use. Pumped liquid: cloudy water without fibers Minimum draft depth: NOVA UP 300 MA 120 mm NOVA UP 300 M-NA 60 mm NOVA UP 600 MA 165 mm NOVA UP 600 M-NA 70 mm Maximum immersion: 7 meters. Installation: vertical, fixed or portable. Degree of protection: IP68. Insulation class: F. APPLICATIONS The submersible drainage pump with vertical delivery is suitable for domestic use of stationary applications with automatic operation, for draining basements and garages subject to flooding. Thanks to its compact and handy shape, it also finds particular application as a portable pump for emergencies such as: drawing water from tanks or rivers, emptying pools and fountains or excavations and underpasses. Also suitable for gardening and hobby work in general. This pump can be used with liquids containing sized bodies solid up to 10mm. The level switch allows a fixed installation guaranteeing its automatic operation. Equipped with a removable filter, it sucks down to a minimum of 2/3mm (with filter removed). CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump body, impeller, cap and suction grille in water-resistant technopolymer. Motor, rotor shaft and screws in stainless steel. Triple seal with interposed rings with pre-oil chamber. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Continuous service asynchronous submersible type. Stator inserted in a stainless steel hermetic casing and covered by a cap that encloses wiring, microswitch and capacitor. Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability. Thermo-amperometric protection built-in and permanently inserted capacitor. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less