Technical features Model : Kit 2 E.SYBOX + E.SYTWIN Product code : 60170272 Power supply : 1 x 220 - 240V ~ 50Hz Power : 1.55 lW (2.1 HP) Weight : 66Kg Operating range : Flow rate up to 120 l/min, head up to 65 metres Pumped liquid: Clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral Liquid Temperature Range : From 0°C to +35°C for domestic use From 0°C to +40°C for other uses Maximum suction depth: 8 meters Maximum Ambient Temperature: +50° C Maximum working pressure: 8 bar (800 kPA) Motor Protection Degree: IPX4 Insulation class : F Installation : Fixed horizontal or vertical position Special versions on request: Other types of electric plug on request E. sybox We imagined e.sybox following our idea of ​​ergonomic technology* and we designed it so that it could enclose and express all the technological know-how of DAB based on 37 years of experience in the mechanical and electronic sector The result of this work is a PATENTED system unique in its kind, efficient, compact, easy and satisfying to use both for the installer and for the end user All these features make e.sybox the most advanced ergonomic system in the world in the field of water pressurization in domestic and residential environments E.sybox is first of all an integrated electronic system equipped with inverter technology, each component has been developed to make the most of it with minimum effort, bringing innovation to the service of simplicity. all enclosed in a "box" with a typically Italian design Inverter Electronic Board Thanks to the Inverter technology, the e.sybox absorbs the necessary energy according to the water requirement, thus avoiding useless waste and allowing for significant economic savings sensors The new compact electronic pressure transducer with integrated temperature sensor developed by DAB, together with the flow sensor both positioned on the pump delivery, send the necessary signals to the electronic board to adequately control the system Internal Hydraulic Connections Designed to minimize overall dimensions, they guarantee compactness to the system and make maintenance easier Expansion vessel Integrated into the system, it has a capacity of 2 liters and is certified for drinking water. Guaranteed for 5 years without the need for maintenance Installation The features and design of e.sybox make it a system that is easily adaptable to any type of installation. Horizontal or vertical, in a ventilated room or in a recess, any environment will be perfect for making the most of the e.sybox. which guarantees a reduction of at least 30% of the overall dimensions compared to any other traditional system EXTERNAL CONNECTIONS Covered by caps equipped with a gasket. Easy to remove, they allow you to choose which system inputs and outputs to use depending on the installation DISPLAY Adjustable high resolution 70x40 mm LCD to adapt readability to the various installations. The intuitive interface allows you to access all the information and customize the main settings according to the specifics of the application TECHNICAL ROOM Allows easy access to rotor shaft, vertical filler cap and expansion tank. It is also a practical housing for maintenance tools and the user guide, functional to the use of the system MOTOR New highly corrosion resistant water-cooled engine. Allows the system to be installed in a recess NON-RETURN VALVE ON DELIVERY Allows both horizontal and vertical installation of the system. It is easily removable for easier maintenance PROTECTION AGAINST FREEZING OF WATER IN THE SYSTEM (ANTI FREEZE) E.sybox is equipped with a protection that prevents the formation of ice inside by activating the electric pump in the event that the temperature drops to values ​​close to freezing QUIET AND COMFORTABLE Every detail of E.sybox has been taken care of with the utmost attention to guarantee levels of comfort that set new reference standards in the sector Simply connect the e.sybox to the electrical outlet to have all the water you need available when you need it The perceived noise as well as the vibrations are minimized with a silence of only 45 dB in standard use DAB HYDRAULICS Self-priming multistage up to 8 m MOTOR The new water-cooled motor eliminates the noise generated by traditional cooling fans INVERTER ELECTRONICS The new variable speed electronics ensures constant pressure in relation to the flow rate. The systems with inverter technology are less noisy than the traditional on/off ones because they adjust the motor revolutions according to need and are also equipped with gradual start-up and shutdown CARENE in ABS material enclose the system with a protective and sound-absorbing function ANTI-VIBRATION FEET They ensure effective absorption of vibrations making e.sybox even more silent and comfortable. They are designed for horizontal and vertical installation of the system ACCESSORIES With E.sybox the accessories become real functional components, ergonomic extensions of the product. E.sydock, E.sytwin and E.sywall have been developed to provide a new installation and use experience E.SYTWIN is the evolution of e.sydock, of which it maintains all the benefits for creating groups with two pumps. It offers exceptional performance thanks to the possibility of combined operation, with dimensions reduced by 50% compared to any other equivalent traditional system. 1"¼ NPT inlet and outlet can be configured on either side of the e.sytwin to make connection to piping as easy as possible A BETTER AND LONGER LIFE E.sytwin guarantees constant water supply to the home thanks to the BACKUP function. The new software algorithms constantly analyze the functioning of the system, thus optimizing the alternating use of the two units. MORE POWER, LESS ENCUMBRANCE E.sytwin offers exceptional performance thanks to the possibility of combined operation, with dimensions reduced by 50% compared to any other equivalent traditional system ALL THAT YOU NEED the wireless interface manages the communication between the two units, e.sydock ensures the hydraulic connection and it is thanks to this technology that e.sytwin does not require any other additional component for its installation and operation. Functionality of the group viewable on each individual display Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Grundfos electric pump for clear water drainage completely in stainless steel UNILIFT KP 350 A1 013N1600 General characteristics Brand: Grundfos Supplied model: UNILIFT KP 350 A1 Supplied model number: 013N1600 Data sheet Max flow rate: 3.89 l/s Max head: 9 m Max. Particle: 10mm Model: A Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Stainless steel: EN 1.4301, AISI 304 Installation Ambient temperature limit. 0 .. 50 °C Connection type. Rp Size attack. 1 1/4 inch max. depth installation. 2 m Liquid Liquid temperature range. 0 .. 50 °C Density. 998.2 kg/m³ Electrical data Absorbed power - P1. 720W Network frequency. 50Hz Nominal tension. 1 x 220-230V Rated current. 3.2A Capacitor capacity - gear. 10µF/400V Protection class (IEC 34-5). IP68 Insulation class (IEC 85). f Integrated motor protection. CONTACT Thermal protection. internal Electric cable length. 5 m Cable plug type. SCHUKO Checks Level switch: Float Other Net weight. 7.2kg Gross weight. 7.6kg Packing volume. 0.013 m³ Description Useful to: Wastewater - Commercial buildings Domestic wastewater Industrial waste water Grundfos UNILIFT KP are stainless steel submersible pumps designed for pumping non-aggressive water and gray wastewater such as sewage and domestic sewage with particles up to 10 mm. The pump can be used as a portable unit or fixed installation inside and outside buildings. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical features Model : CM 3-3 Voltage : 1 x 220-240V Flow rate: 3.1 m3 / h Head : 20.6 m Power : 0.50kW / 0.67kW Suction : Rp 1" Send : Rp 1" Sound power level : 53 dB(A) Dimensions Height : 20.8cm Length : 30.4cm Width : 14.1cm Weight : 12.00 Kg Grundfos CM-A The two main features of the horizontal multistage CM pump are compactness and modularity, which make different configurations possible. The pump is mainly composed of a series of interchangeable modules, designed to work together for a long time, regardless of the application. CM pumps are equipped with mains powered motors. The CM pump is mainly used as an integrated pump in OEM solutions and in household compressors. It is compact, silent, reliable and flexible and all this makes it an optimal solution for installation and interaction with other components in large systems. It can be installed in systems or used as an independent pump. GRUNDFOS MULTISTAGE SINGLE-PHASE CENTRIFUGAL PUMP CM3-3 SERIES CM is the Grundfos centrifugal electric pump series. Excellent for a wide range of applications, it stands out for its excellent technical characteristics and ease of use. GREAT INSTALLATION AND USE MODULARITY The peculiar feature of the Grundfos CM electric pump is the quality of the components. The shaft, impellers and chambers are in stainless steel, the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The thread is of the Whitworth RP type. The engine is air cooled. The electric pump is equipped with thermal protection with automatic reset for any faults caused by both slow and rapid increases in temperature (constant overload and stall conditions). It is capable of withstanding dry running for short periods. The compact dimensions and the lowered base allow it to be installed even where space is limited. APPLICATIONS The Grundfos centrifugal CM is an electric pump ideal for pressurizing and moving liquids on the surface. There are many applications: washing systems of all kinds, withdrawal from tanks, domestic supply, pressurisation, irrigation, swimming pools, fountains, etc. GUARANTEED SAVINGS AND HIGH COMFORT Grundfos motors are characterized by their high efficiency in relation to low electrical consumption. The savings also materialize in the duration over time due to the high construction quality and the materials used. The shaft, the impellers and the chambers are in stainless steel, the pump body with the water inlet and outlet are in cast iron; a special O-ring gasket is used for the mechanical seal. The engine is air cooled. The remarkable reactivity to the demand for water and the silent operation contribute considerably to the efficiency of the product and to the comfort produced both in domestic and professional uses. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase

Read more less

Small size SFA pump with non-return valve Model WATERSAN 11 Code 0050393 WS11 General characteristics Brand: Sfa Code: 0050393 WS11 Model: WATERSAN 11 Main feature: Small size pump, with non-return valve to avoid foam spills Data sheet Horizontal head: 80 m Vertical head: 4 m Exhaust pipe diameter: 32 mm Dimensions: 260L x 230D x 220H Dimensions   Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Single-stage self-priming Grundfos electric pump for clear water jp4-54 99458768 General characteristics Brand: Grundfos Supplied model: jp4-54 Supplied model number: 99458768 Data sheet Nominal flow rate: 4 m³/h Max warhead: 50m / 50m Primary mechanical seal: BBVP Approvals on nameplate: CE,EAC Curve tolerance: ISO9906:2012 3B Model: A Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller: Composite Material code: S Installation Ambient temperature limit: 0 .. 40 °C Max operating pressure: 6 bar Max suction pressure: 1 bar Pump suction: G1 Pump delivery : G1 Liquid Pumped liquid Water Liquid temperature range 0 .. 40 °C Liquid temperature during operation 20 °C Density 998.2 kg/m³ Electrical data Absorbed power - P1: 1130 W rated power - P2: 0.746 kW Network frequency: 50Hz Rated Voltage: 1 x 230V Rated Current: 5.1A Starting Current: 17.8A Rated Transmission Speed: 2800rpm Capacitor capacity - run: 12 µF/450 V Protection class (IEC 34-5): IP44 Insulation class (IEC 85:) F Cable plug type: SCHUKO Cable: Y Checks Presscontrol: Without presscontrol Switch: On/Off switch not included Description The electric pump has been designed for the supply of clear water and other moderately aggressive liquids; it is the ideal choice for use in private homes, country houses and gardens. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical features Model: FEKA VS 550 MA single-phase Power supply: 1 x 230V~50Hz Power: 0.55kW (0.75HP) Capacitor capacity: 20mF Operating range: flow rate up to 300 l/min (18 m3/h) with heads up to 7.4 metres. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics FEKA VS Submersible pumps WASTEWATER LIFTING Submersible pump in stainless steel with vortex impeller in precision cast steel. Suitable for wastewater and residential sewage containing solids up to 50mm in size. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Seal holder cover, motor case, cap with handle in stainless steel. Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Engine construction features Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 Max starts/hour: 20 Series features: Operating range: from 0 to 32 m3/h with head up to 14 metres. Pumped liquid: sewage and used water in general, however non-aggressive. Free passage: 50 mm Liquid temperature range: - from 0°C to +35°C for domestic use (EN 60335-2-41) - from 0°C to +50°C for other uses Maximum ambient temperature for pump operation with the motor surfaced: +40°C Maximum immersion depth: 7 meters Motor protection degree: IP 68 Insulation class: F Series voltage: 220-240V~ 50Hz Single-phase 380-415V~ 50Hz Three-phase Power cable: 10 meters H07RN-F, with plug for the single-phase version Installation: fixed or portable, vertical Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Grundfos submersible single-impeller three-phase electric pump for sewage in stainless steel ap 50b.50.11.3 96004601 WITHOUT SHUKO PLUG General characteristics Brand: Grundfos Model: ap 50b.50.11.3 Code: 96004601 Data sheet Max flow rate: 8.06 l/s Max head: 14 m Impeller type: VORTEX Max. Particle: 50mm Material Pump body: Stainless steel EN 1.4301 AISI 304 Impeller Steel: stainless steel EN 1.4301 AISI 304 Installation Ambient temperature limit: 0 .. 40 °C Connection type: Rp Size attack: 2 inch max. depth of installation: 2 m Inst. dry/submerged room: S Auto Pairing: Y Liquid Liquid temperature range: 0 .. 40 °C Density: 998.2 kg/m³ Electrical data P1 power input: 1.75 kW Rated power - P2 : 1.31 kW Network frequency: 50Hz Rated Voltage: 3 x 400V Rated Current: 2.81A Cos phi - power factor: 0.90 Rated Drive Speed: 2785rpm Capacitor capacity - run: 16 µF/400 V Protection class (IEC 34-5): IP68 Insulation class (IEC 85): F Integrated motor protection: NONE Thermal protection: external Electric cable length: 5 m Cable plug type: NONE Other Net weight: 11.4kg Gross weight: 13.4kg Description Useful to: Wastewater - Commercial buildings Domestic wastewater Grundfos UNILIFT AP35B are stainless steel submersible pumps designed for pumping sewage (excluding toilet waste), with particles up to 35 mm. The pump is suitable for self-coupling installation, allowing easy access for maintenance and other purposes. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 12 months from the date of purchase.

Read more less

Technical features Model Dab Submersible Electric Pump Model Nova Up 600 M-NA For Draining Clear Water For Domestic Use Energy efficiency Operating range: from 1 to 15 m3 /h with heads up to 10 metres. Liquid temperature range: from 0°C to +35°C for domestic use. Pumped liquid: cloudy water without fibers Minimum draft depth: NOVA UP 300 MA 120 mm NOVA UP 300 M-NA 60 mm NOVA UP 600 MA 165 mm NOVA UP 600 M-NA 70 mm Maximum immersion: 7 meters. Installation: vertical, fixed or portable. Degree of protection: IP68. Insulation class: F. APPLICATIONS The submersible drainage pump with vertical delivery is suitable for domestic use of stationary applications with automatic operation, for draining basements and garages subject to flooding. Thanks to its compact and handy shape, it also finds particular application as a portable pump for emergencies such as: drawing water from tanks or rivers, emptying pools and fountains or excavations and underpasses. Also suitable for gardening and hobby work in general. This pump can be used with liquids containing sized bodies solid up to 10mm. The level switch allows a fixed installation guaranteeing its automatic operation. Equipped with a removable filter, it sucks down to a minimum of 2/3mm (with filter removed). CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump body, impeller, cap and suction grille in water-resistant technopolymer. Motor, rotor shaft and screws in stainless steel. Triple seal with interposed rings with pre-oil chamber. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Continuous service asynchronous submersible type. Stator inserted in a stainless steel hermetic casing and covered by a cap that encloses wiring, microswitch and capacitor. Rotor mounted on greased-for-life and oversized ball bearings to guarantee silence and durability. Thermo-amperometric protection built-in and permanently inserted capacitor. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Dab EvoPlus B 150/250.40 M electronic circulator EVOPLUS circulators they can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as offices, condominiums, hospitals and schools. The EVOPLUS line consists of a complete range of circulators , with a maximum flow rate up to 75.6 m3/h and maximum head up to 18 m3. they are equipped with fl anged ports up to DN 100 in single and twin versions. INTELLIGENT PRODUCT Choosing Evoplus means saving while respecting the environment. Evoplus is an innovative product because it was designed to really improve life: cutting-edge components and electronics guarantee high performance, low consumption and simple and immediate usability. The impact on the environment is significantly reduced, with a real reduction in consumption of over 70% compared to the old circulators. Evoplus: technological intelligence and eco-friendly design at your service. Evoplus: technological intelligence and eco-friendly design at your service Technology and integrated electronics guarantee constant optimization of the operating regime which eliminates waste and lengthens the life cycle of a product designed to last over time. Speed ​​and power are determined by the specific performance request, allowing an action that is always effective and effi cient, personalized in all application contexts. Simple and usable technology Evoplus simplifies the installation, maintenance and control processes, with savings in terms of time and costs which confirm the competitiveness of the entire range. • ease of installation thanks to the elimination of the by-pass in the system • clear and intuitive interface guaranteed by an easy and clear display for viewing the operating status, which favors the practical selection of the regulation mode • constant control ensured by the remote control function which allows interactive, easy and immediate management, at any time and from any location SUSTAINABLE Eco-compatibility is a strategic choice and a mandatory requirement, thanks to the Erp Ecodesign Directive. Evoplus circulators with an efficiency technology oriented towards respect for the environment, today offer a safe change, with a view to sustainable and aware development. The Erp "Eco-design" 2009/125/EC regulation: involves all "energy-related products" and aims in various steps to direct the market towards the diffusion of high-efficiency "intelligent" products. Implementation step of the Regulation: • From 1 August 2015: the EEI limit value will be further lowered to 0.23 also for pumps integrated in heat generators and solar stations. • From 1 January 2020: the validity of the limit value EEI 0.23 will also apply to the replacement of pumps integrated in existing heat generators TECHNICAL DATA Operating range: from 3 to 75.6 m³/h with head up to 18 metres; Liquid temperature range: -10°C to +110°C Pumped liquid: clean, free from solids and mineral oils, non-viscous, chemically neutral, close to the characteristics of water. (glycol max 30%) Maximum working pressure: 16 bar (1600 kPa) Standard flanging: DN 32, DN 40, DN 50, DN 65, PN 6 / PN 10 / PN 16 (4 slots), DN 80 and DN 100, PN 6 (4 slots) Maximum ambient temperature: + 40°C. Minimum head pressure: the values ​​are shown in the relative tables. Special executions on request: DN 80 , DN 100 PN 10 / PN 16 (8 holes) Accessories (Counterflanges): PN 10 DN 32 - DN 40 - DN 50 - DN 65 PN 6 DN 80 - DN 100 Electromagnetic compatibility: EVOPLUS circulators comply with EN 61800-3 standard, in category C2, for electromagnetic compatibility. Electromagnetic emissions: residential environment (containment measures may be required in some cases). Conducted emissions: residential environment (in some cases they can be required containment measures) APPLICATIONS EVOPLUS electronic circulation pumps can be used in heating, ventilation and air conditioning systems for residential and commercial buildings such as: - Large residential buildings - Condominiums and blocks of flats - Homes - Clinics and hospitals - Schools - Office buildings - Real estate All models are available in both single and twin versions. Execution with bronze pump body for the recirculation of sanitary water, available in single version with flanged ports DN 32, DN 40, DN 50 and DN 65. Arranged as standard for control via external 0-10 v signal. or PWM and for connection to ModBus plant management systems (LonBus with special optional communication module). It is possible to remotely control the single version thanks to the Dconnect service (with Dconnect Box supplied separately) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Self-priming cast iron electric pump Ebara Mod. Aga M 2.0 Single-phase motor Single-phase motor 230V ±10% 50Hz Flow rate up to 100 l/min (6 m³/h) Head up to 59 m Maximum operating pressure: - 6 bar for AGA 0.60-0.75-1.00 - 10 bars for the rest of the range Maximum liquid temperature: 45°C Maximum suction depth: 8 m High energy efficiency IE2 and IE3 motors starting from 0.75kW Insulation class F Degree of protection IP44 Cast iron pump body Impeller in PPE+PS reinforced with glass fibres for AGA 0.60-0.75- 1.00, in brass for the rest of the range AGA The AGA - AGC electric pumps are self-priming cast iron electric pumps equipped with a Venturi group (ejector and diffuser) in PPE + PS reinforced with glass fibres. Practical, easy to use and easily transportable thanks to their low weight. The pump body is in cast iron for all models. Among their peculiarities is that of having the shaft in AISI 303 steel (for the part in contact with the liquid). The available impellers are in PPE + PS reinforced with glass fibres for AGA 0.60 – 0.75 – 1.00 and in brass for the rest of the range. The mechanical seal is in Ceramic/Carbon/NBR. The 2-pole asynchronous self-ventilated motors are high energy efficiency IE3 starting from 0.75 kW. PUMP TECHNICAL DATA Head from 16.5 to 68 m Flow rate from 0.3 to 9.6 m3/h Maximum operating pressure: - 6 bar for AGA 0.60 - 0.75 - 1.00 - 10 bars for the rest of the range Maximum liquid temperature 45°C Maximum suction depth 8 m Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical Features Model : UNILIFT CC 7 A1 Mouth size ; G 1 1/4 Power : 0.38 kW / 0.51 HP Intensity: 1.80 A Cable: 10m UNILIFT CC The Unilift CC pump is a single stage submersible drainage pump designed for pumping drainage water and grey waste water. The Unilift CC pump can take water up to a level of 3 mm above the floor, removing the filter. The Unilift CC pump is suitable for permanent and temporary installations. The Unilift CC pump is equipped with a flap check valve on the discharge port to prevent backflow from the pipework. An adapter ensures the correct connections to 3/4" or 1 1/4" discharge ports. The filter is made of stainless steel while the main parts of the pump, such as the body and housing, are made of molded composite materials. The Multibox B-CC7 is a Unilift CC pump combined with additional elements such as a hose with Storz coupling, adapter for threaded Storz coupling and a box with perforated mesh sides to be used as a pre-filter for the pump. It is the perfect solution to use as an emergency kit for single-family homes in the event of flooding. Applications The Unilift CC pump is designed for the following pumping applications: Water and rainwater in agriculture Water from rivers and lakes Rainwater and drainage Water for filling/emptying tanks, ponds, cans, etc. Effluents from showers, car washes and wells below the level of the sewer system Pool water Ditch drainage water Groundwater (lowering applications) Effluents from viaducts, underpasses, etc. Drainage water from splinker systems in garages. Features and Benefits Composite materials Stainless steel filter Automatic air vent valve on the handle Available with level switch Suitable for low suction levels Compact shape for easy movement and cleaning Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 12 months from the date of purchase

Read more less

Technical Features Model: DIVER 75 MA single phase Power supply: 1 x 230V~50Hz Power: 0.55 kW (0.75 HP) Capacitor: 16mF Operating range: flow rate up to 80 l/min (4.8 m3/h) with heads up to 39 metres. DAB PUMPS  There is a name in the electric pump sector that for over 30 years, all over the world, has been synonymous with high technology and reliability. This name is DAB, a company that since 1975 has designed and built electric pumps with a very specific aim: to respond to the increasingly demanding market requests not only with products that meet the highest levels of quality, but also with an efficient and versatile service. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water movement sector. Its core business concerns the design, production and sale of hydraulic electric pumps capable of satisfying any need for any type of domestic and professional application. A network as big as the world Over the course of its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers that provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the company structure is made up of 9 foreign branches and numerous distributors throughout the world. The most reliable products With over 2 million pieces produced each year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a vast range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance in the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that seek to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the approval procedures to which each line is subjected before production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and maximum performance of its products. General Features DIVER 5" Submersible Monobloc Multistage Electric Pumps DIVER electric pumps are used in systems for lifting clear water from wells, primary collection tanks or cisterns, Roman wells or watercourses and are suitable for the distribution of pressurized water in domestic systems, small-scale agriculture, and sprinkler irrigation of gardens and vegetable gardens. The pump, particularly silent, used inside wells or tanks avoids all problems related to suction and depriving. General features of the series: Operating range: from 0.6 to 12 m3/h with head up to 96 metres Pumped liquid: clean, without solid or abrasive bodies, non-aggressive Maximum presence of sand in the water: 50 gr/m3 Liquid temperature range: 0°C to +35°C Maximum immersion: 20 m Delivery mouth diameter: 1” 1/4 GAS Power tolerance: +6% / -10% Maximum number of starts: 20/h Motor protection class: IP 68 Engine protection class: F Installation: in wells, tanks and cisterns, in vertical position. Special executions on request: other voltages and/or frequencies. Automatic version with float Construction features of the pump Submersible monobloc multistage pump with the hydraulic part under the motor whose cooling is ensured by the pumped liquid. Impellers and diffusers in Noryl loaded with glass fibre with anti-wear stainless steel shim ring. Outer jacket, stator jacket, upper head with sleeve and closing ring in AISI 304 steel. Encapsulated stator. Cast iron supports. Rotor shaft extension in AISI 304. Lip seal on motor side and silicon carbide/silicon carbide mechanical seal on pump side. Engine construction features Asynchronous two-pole submersible built entirely of stainless steel, dry and cooled externally by the pumped liquid. Stator encapsulated in AISI 304L. Squirrel cage rotor mounted on ball bearings, and oversized to ensure silence, reliability and durability. On request, the single-phase version is supplied with the CONTROL BOX. User protection for three-phase version. Automatic version with float available. Available on request, the version with support base and lateral suction (DRY). Degree of protection: IP 68 Insulation class: F Series voltage: single phase 230 V / 50 Hz three phase 400 V / 50 Hz Power cord: H07RN-F detachable, length 10 meters. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less