Discover our wide selection of pumps and electric pumps to meet all your needs. From irrigation pumps to drainage pumps, we offer high quality, reliable solutions. Choose from a range of wattages and capacities to ensure optimal performance.
Pumps and electric pumps
DAB Dab Submersible Motor Model 4ol 0.75 Kw 1 Hp Single Phase 99534035
Technical features Product Code : 4OL 0.75 kW Power supply : 1 x 220 - 240V ~ 50Hz Power : 0.75 kW (1 HP) Flanging : NEMA 4" Insulation class : F Degree of Protection : IP 68 Cooling Flow Velocity : Min. 0,3 m/s 35°C Maximum number of starts: 20/h Maximum operating depth: 250 m Horizontal operation : 1 HP Absorbed power : 1275 W Number of revolutions per minute : 2820 Efficiency : 59% Cable section: 4x1.5 mm Cable length : 1.7m 40L Immersed Engine 4” submersible asynchronous two-pole electric motor, rewindable, built in AISI 304 stainless steel for the parts in contact with water. The cooling and lubrication of the ball bearings is ensured by a special FDA approved liquid. The stator is inserted in an AISI 304L stainless steel jacket fixed by steel pins to the upper motor support. The cable connector is removable to ensure quick and simple maintenance operations Construction features Rewindable stator with external jacket in AISI 304L. The stator has 24 slots for greater elasticity and regularity of operation; Class H double enamel insulated copper conductors Oversized ball bearings with high axial load. 0.5HP to 2HP: 2000N 3 HP: 3000N From 4HP to 5.5HP: 4000N 7.5HP to 10HP: 5000N Shafts with terminal in AISI 304/Duplex, with a particular surface hardening process. Squirrel cage rotor in aluminum for powers up to 3HP, in copper for motors with power higher than 4HP Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€185,00
-
DAB Dab Submersible Motor Model 4ol 1.5 Kw 2 Hp Single Phase 99534059
Technical features Product Code : 4OL 1.5 kW Power supply : 1 x 220 - 240V ~ 50Hz Power : 1,5 kW (2HP) Flanging : NEMA 4" Insulation class : F Degree of Protection : IP 68 Cooling Flow Velocity : Min. 0,3 m/s 35°C Maximum number of starts: 20/h Maximum operating depth: 250 m Horizontal operation : 2 HP Absorbed power : 2160 W Number of revolutions per minute : 2800 Efficiency : 69% Cable section: 4x1.5 mm Cable length : 1.7m 40L Immersed Engine 4” submersible asynchronous two-pole electric motor, rewindable, built in AISI 304 stainless steel for the parts in contact with water. The cooling and lubrication of the ball bearings is ensured by a special FDA approved liquid. The stator is inserted in an AISI 304L stainless steel jacket fixed by steel pins to the upper motor support. The cable connector is removable to ensure quick and simple maintenance operations Construction features Rewindable stator with external jacket in AISI 304L. The stator has 24 slots for greater elasticity and regularity of operation; Class H double enamel insulated copper conductors Oversized ball bearings with high axial load. 0.5HP to 2HP: 2000N 3 HP: 3000N From 4HP to 5.5HP: 4000N 7.5HP to 10HP: 5000N Shafts with terminal in AISI 304/Duplex, with a particular surface hardening process. Squirrel cage rotor in aluminum for powers up to 3HP, in copper for motors with power higher than 4HP Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€224,00
-
DAB Dab Jet 82 M Hp 0.8 Single-Phase Self-Priming Centrifugal Electric Pump 99037673
Technical features Model: JET 82 M single-phase Code: 102660020 Power supply: 1 x 220-240V~50Hz Power: 0.6kW (0.8HP) Capacitor capacity: 12.5mF Operating range: flow rate up to 60 l/min (3.6 m3/h) with head up to 47 metres. Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure: 6 bar (600 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal board). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€110,00
-
DAB Multistage Centrifugal Electric Pump Dab Euro 30/30 M Hp 0.6 Single Phase 99455002
Technical features Model : Euro 30 /30 M single-phase Code : 102970020 Number of impellers : 4 Power : 0.45 kW (0.6 HP) Capacitor Capacity: 12.5mF Operating range : Flow rate up to 55 l/min (3.3 m3/h) with heads up to 46 metres. Maximum working pressure : 8 bar (800 kPa) General characteristics Multistage centrifugal EURO electric pump, pump body in cast iron. Horizontal axis multistage centrifugal pump, characterized by extremely silent operation, suitable for domestic use for water supply and pressurization, irrigation of orchards and gardens, movement of water in general. Advantages Pump body in 200 UNI ISO 185 cast iron engine mount in die-cast aluminium seal holder cover in AISI 304 steel Mechanical seal in carbon/ceramic Motor shaft in AISI 304 steel Impellers, diffuser bodies and diffusers in technopolymer Stainless steel shim rings Features of the series Motor protection degree : IP 44 Degree of protection of the terminal block: IP 55 Insulation class : F Operating range : From 10 to 120 l/min with head up to 72 metres Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water Liquid temperature range : From 0°C to +35°C for domestic use (EN 60335-2-41). From o°C to +40°C for other uses Maximum working pressure : 8 bar (800 kPa) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€120,00
-
DAB Stainless Steel Multi-Stage Self-Priming Horizontal Electric Pump Model Multi 3 M Hp 0.75
Technical features Model: MULTI INOX 3 Code : 60122692 Number of impellers : 3 Operating range: flow rate up to 90 l/min; head up to 59 m Liquid temperature range: from 0°C to +35°C for domestic use, from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum suction depth: 8 meters Maximum ambient temperature: +40°C Degree of protection: IPX4 Insulation class: F Installation: fixed or portable in horizontal position Special versions on request: other voltages and/or frequencies Packing dimensions : 460 x 230 x 270 Weight 8.8Kg DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics Self-priming, multi-impeller pump, ideal for water supply in domestic and garden applications. Very performing and highly silent. Available with 3, 4 and 5 impellers in AISI 304 stainless steel. Anti-corrosion and anti-overheating materials. Double insulation system between motor and hydraulic part. Excellent resistance to low temperatures. Equipped with power cable plus plug. Engine construction features: Stainless steel pump jacket. Pressure body, suction body and motor support in technopolymer. Impellers in AISI 304 steel, diffuser bodies and diffusers in technopolymer. Mechanical seal in carbon/ceramic. Rotor shaft in AISI 304 steel. Continuous service single-phase asynchronous motor. Built-in thermo-amperometric protection and permanently inserted capacitor. APPLICATIONS Multistage centrifugal pump with horizontal axis, self-priming with excellent suction capacity even in the presence of air bubbles, characterized by extremely silent operation suitable for domestic use for water supply and pressurization, irrigation of orchards and gardens, movement of water in general. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€254,00
-
DAB Multistage Submersible Electric Pump Dab Diver 150 MA Hp 1.5 Single-Phase - Control Panel 99331054 excluded
Technical features Model: DIVER 150 MA single-phase Power supply: 1 x 230V~50Hz Power: 1kW (1.5HP) Capacitor: 30mF Operating range: flow rate up to 80 l/min (4.8 m3/h) with head up to 80 metres. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics DIVER 5" submersible monobloc multistage electric pumps DIVER electric pumps are used in systems for lifting clear water from wells, first collection tanks or cisterns, Roman wells or streams and are suitable for the distribution of pressurized water in domestic systems, small agriculture, sprinkler irrigation of gardens and vegetable gardens. The pump, particularly silent, used inside wells or tanks avoids all the problems related to suction and deactivation. General characteristics of the series: Operating range: from 0.6 to 12 m3 /h with head up to 96 metres Pumped liquid: clean, without solid or abrasive bodies, non-aggressive Max presence of sand in the water: 50 gr/m3 Liquid temperature range: from 0°C to +35°C Maximum immersion: 20m Delivery port diameter: 1” 1/4 GAS Power Tolerance: +6% / -10% Maximum number of starts: 20/h Motor protection degree: IP 68 Engine protection class: F Installation: in wells, tanks and cisterns, in vertical position. Special executions on request: other voltages and/or frequencies. automatic version with float Construction features of the pump Submersible monobloc multistage pump with the hydraulic part under the motor which is cooled by the pumped liquid. Impellers and diffusers in Noryl reinforced with glass fiber with wear-resistant wear ring in stainless steel. External jacket, stator jacket, upper head with sleeve and closing ring in AISI 304 steel. Encapsulated stator. Cast iron supports. Rotor shaft extension in AISI 304. Motor side lip seal and silicon carbide/silicon carbide mechanical seal on pump side. Engine construction features Two-pole asynchronous type submersible built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L. Squirrel cage rotor mounted on ball bearings, and oversized to guarantee silence, reliability and durability. Upon request, the single-phase version is supplied with the CONTROL BOX. Protection by the user for the three-phase version. Automatic version with float available. The version with support base and side suction (DRY) is available on request. Degree of protection: IP68 Insulation class: F Series voltage: single-phase 230V/50Hz three-phase 400V/50Hz Power cord: H07RN-F detachable, length 10 meters. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€455,00
-
DAB Automatic Multi-impeller Pump Self-priming On / Off Dab Booster Silent 5 M Hp 1.36 Single-Phase 99330729
Technical features Model : BOOSTER SILENT 5 M Operating range: Flow rate up to 80 l/min head up to 46 m Liquid temperature range : from 0°C to +35°C for domestic use, from 0°C to +40°C for other uses. Pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral Maximum suction depth: 8 meters Maximum ambient temperature: +40°C Degree of protection: IPX4 Insulation class: F Installation: fixed or portable in horizontal position. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics The Dab Booster Silent 0.75 HP pump is a silent single-phase electric pump with only 67 dB. The real revolution in the Dab house is the silent booster electric pump. APPLICATIONS Automatic, multi-impeller (3-4-5) and self-priming pressurization system up to 8 meters with integrated electronics, for water supply household, gardening and small irrigation systems. CONSTRUCTION FEATURES Hulls in sound-absorbing composite material and hydraulic components in technopolymer. Mechanical seal in carbon / ceramic. Continuous service single-phase asynchronous motor cooled by the pumped liquid. Built-in thermo-amperometric protection and permanently inserted capacitor. The system is equipped with an integrated electronic board, pressure switch and flow switch for automatic start and stop when the utilities are opened and closed. The electronic device prevents dry running of the pump. Equipped with status and alarm LEDs. Provides automatic or manual restart when error conditions are restored. The system is supplied with a non-return valve on the suction side, a 2-metre power cord with plug and a 2-litre tank. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€445,00
-
DAB Submersible Centrifugal Pump In Stainless Steel Dab Feka Vs 1000 MA Hp 1.36 Single Phase 99582791
Technical features Model: FEKA VS 1000 MA single-phase Power supply: 1 x 230V~50Hz Power: 1kW (1.36HP) Capacitor capacity: 25mF Operating range: flow rate up to 400 l/min (24 m3/h) with heads up to 11.8 metres. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics FEKA VS Submersible pumps WASTEWATER LIFTING Submersible pump in stainless steel with vortex impeller in precision cast steel. Suitable for wastewater and residential sewage containing solids up to 50mm in size. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Seal holder cover, motor case, cap with handle in stainless steel. Construction features of the pump Pump body, seal holder cover, motor casing, cap with handle in AISI 304 stainless steel. Impeller in precision cast steel. Handle covered in insulating rubber. Motor shaft in AISI 316 stainless steel. Double mechanical seal with interposed oil chamber (non-toxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side. Engine construction features Dry motor, asynchronous type, watertight, cooled by the pumped liquid. Rotor mounted on greased-for-life ball bearings, oversized and selected to ensure low noise and durability. Standard thermo-amperometric protection for the single-phase version, provided by the user for the three-phase version. Capacitor permanently inserted in the single-phase version. Continuous service with liquid at 35 °C and totally immersed pump. The single-phase version can be supplied with a float for automatic operation. Power cable: 10 meters H07RN-F, with plug for the single-phase version. Number of poles: 2 Max starts/hour: 20 Series features: Operating range: from 0 to 32 m3/h with head up to 14 metres. Pumped liquid: sewage and used water in general, however non-aggressive. Free passage: 50 mm Liquid temperature range: - from 0°C to +35°C for domestic use (EN 60335-2-41) - from 0°C to +50°C for other uses Maximum ambient temperature for pump operation with the motor surfaced: +40°C Maximum immersion depth: 7 meters Motor protection degree: IP 68 Insulation class: F Series voltage: 220-240V~ 50Hz Single-phase 380-415V~ 50Hz Three-phase Power cable: 10 meters H07RN-F, with plug for the single-phase version Installation: fixed or portable, vertical Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€455,00
-
DAB Horizontal Multistage Self-priming Electric Pump Model Multi Inox 5 M Hp 1.36
Technical features Model: MULTI INOX 5 Code : 60122694 Number of impellers : 5 Operating range: flow rate up to 90 l/min; head up to 59 m Liquid temperature range: from 0°C to +35°C for domestic use, from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum suction depth: 8 meters Maximum ambient temperature: +40°C Degree of protection: IPX4 Insulation class: F Installation: fixed or portable in horizontal position Special versions on request: other voltages and/or frequencies Packing dimensions : 460 x 230 x 270 Weight 12.5kg DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics Self-priming, multi-impeller pump, ideal for water supply in domestic and garden applications. Very performing and highly silent. Available with 3, 4 and 5 impellers in AISI 304 stainless steel. Anti-corrosion and anti-overheating materials. Double insulation system between motor and hydraulic part. Excellent resistance to low temperatures. Equipped with power cable plus plug. Engine construction features: Stainless steel pump jacket. Pressure body, suction body and motor support in technopolymer. Impellers in AISI 304 steel, diffuser bodies and diffusers in technopolymer. Mechanical seal in carbon/ceramic. Rotor shaft in AISI 304 steel. Continuous service single-phase asynchronous motor. Built-in thermo-amperometric protection and permanently inserted capacitor. APPLICATIONS Multistage centrifugal pump with horizontal axis, self-priming with excellent suction capacity even in the presence of air bubbles, characterized by extremely silent operation suitable for domestic use for water supply and pressurization, irrigation of orchards and gardens, movement of water in general. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€314,00
-
DAB Dab Submersible Motor Model 4ol 1.5 Kw 2 Hp Three-Phase 99534080
Technical features Product Code : 4OL 1.5 kW Power supply : 3 x 400V ~ 50Hz Power : 1,5 kW (2 HP) Flanging : NEMA 4" Insulation class : F Degree of Protection : IP 68 Cooling Flow Velocity : Min. 0,3 m/s 35°C Maximum number of starts: 20/h Maximum operating depth: 250 m Horizontal operation : 2 HP Absorbed power : 2160 W Number of revolutions per minute : 2810 Efficiency : 69% Cable section: 4x1.5 mm Cable length : 1.7m 40L Immersed Engine 4” submersible asynchronous two-pole electric motor, rewindable, built in AISI 304 stainless steel for the parts in contact with water. The cooling and lubrication of the ball bearings is ensured by a special FDA approved liquid. The stator is inserted in an AISI 304L stainless steel jacket fixed by steel pins to the upper motor support. The cable connector is removable to ensure quick and simple maintenance operations Construction features Rewindable stator with external jacket in AISI 304L. The stator has 24 slots for greater elasticity and regularity of operation; Class H double enamel insulated copper conductors Oversized ball bearings with high axial load. 0.5HP to 2HP: 2000N 3 HP: 3000N From 4HP to 5.5HP: 4000N 7.5HP to 10HP: 5000N Shafts with terminal in AISI 304/Duplex, with a particular surface hardening process. Squirrel cage rotor in aluminum for powers up to 3HP, in copper for motors with power higher than 4HP Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€234,00
-
DAB Dab Submersible Motor Model 4ol 1.1 Kw 1.5 Hp Three-Phase 99534073
Technical features Product Code : 4OL 1.1 kW Power supply : 3 x 400V ~ 50Hz Power : 1.1 kW (1.5HP) Flanging : NEMA 4" Insulation class : F Degree of Protection : IP 68 Cooling Flow Velocity : Min. 0,3 m/s 35°C Maximum number of starts: 20/h Maximum operating depth: 250 m Horizontal operation : 1.5 HP Absorbed power : 1700 W Number of revolutions per minute : 2830 Efficiency : 65% Cable section: 4x1.5 mm Cable length : 1.7m 40L Immersed Engine 4” submersible asynchronous two-pole electric motor, rewindable, built in AISI 304 stainless steel for the parts in contact with water. The cooling and lubrication of the ball bearings is ensured by a special FDA approved liquid. The stator is inserted in an AISI 304L stainless steel jacket fixed by steel pins to the upper motor support. The cable connector is removable to ensure quick and simple maintenance operations Construction features Rewindable stator with external jacket in AISI 304L. The stator has 24 slots for greater elasticity and regularity of operation; Class H double enamel insulated copper conductors Oversized ball bearings with high axial load. 0.5HP to 2HP: 2000N 3 HP: 3000N From 4HP to 5.5HP: 4000N 7.5HP to 10HP: 5000N Shafts with terminal in AISI 304/Duplex, with a particular surface hardening process. Squirrel cage rotor in aluminum for powers up to 3HP, in copper for motors with power higher than 4HP Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€194,00
-
DAB Multistage Centrifugal Electric Pump Dab Euro 30/50 M Hp 0.75 Single-Phase 99034498
Technical features Model : Euro 30 / 50 M single-phase Code : 102970060 Number of impellers : 3 Power : 0.55 kW (0.75 HP) Capacitor Capacity: 12.5mF Operating range : Flow rate up to 80 l/min (4.8 m3/h) with heads up to 42.5 metres. Maximum working pressure : 8 bar (800 kPa) General characteristics Multistage centrifugal EURO electric pump, pump body in cast iron. Horizontal axis multistage centrifugal pump, characterized by extremely silent operation, suitable for domestic use for water supply and pressurization, irrigation of orchards and gardens, movement of water in general. Advantages Pump body in 200 UNI ISO 185 cast iron engine mount in die-cast aluminium seal holder cover in AISI 304 steel Mechanical seal in carbon/ceramic Motor shaft in AISI 304 steel Impellers, diffuser bodies and diffusers in technopolymer Stainless steel shim rings Features of the series Motor protection degree : IP 44 Degree of protection of the terminal block: IP 55 Insulation class : F Operating range : From 10 to 120 l/min with head up to 72 metres Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water Liquid temperature range : From 0°C to +35°C for domestic use (EN 60335-2-41). From o°C to +40°C for other uses Maximum working pressure : 8 bar (800 kPa) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€156,00
You have seen 36 out of 145 products