Technical features Product Code : 4OL 1.1 kW Power supply : 1 x 220 - 240V ~ 50Hz Power : 1.1 kW (1.5 HP) Flanging : NEMA 4" Insulation class : F Degree of Protection : IP 68 Cooling Flow Velocity : Min. 0,3 m/s 35°C Maximum number of starts: 20/h Maximum operating depth: 250 m Horizontal operation : 1.5 HP Absorbed power : 1780 W Number of revolutions per minute : 2800 Efficiency : 62% Cable section: 4x1.5 mm Cable length : 1.7m 40L Immersed Engine 4” submersible asynchronous two-pole electric motor, rewindable, built in AISI 304 stainless steel for the parts in contact with water. The cooling and lubrication of the ball bearings is ensured by a special FDA approved liquid. The stator is inserted in an AISI 304L stainless steel jacket fixed by steel pins to the upper motor support. The cable connector is removable to ensure quick and simple maintenance operations Construction features Rewindable stator with external jacket in AISI 304L. The stator has 24 slots for greater elasticity and regularity of operation; Class H double enamel insulated copper conductors Oversized ball bearings with high axial load. 0.5HP to 2HP: 2000N 3 HP: 3000N From 4HP to 5.5HP: 4000N 7.5HP to 10HP: 5000N Shafts with terminal in AISI 304/Duplex, with a particular surface hardening process. Squirrel cage rotor in aluminum for powers up to 3HP, in copper for motors with power higher than 4HP Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product Code : 4OL 1.1 kW Power supply : 3 x 400V ~ 50Hz Power : 1.1 kW (1.5HP) Flanging : NEMA 4" Insulation class : F Degree of Protection : IP 68 Cooling Flow Velocity : Min. 0,3 m/s 35°C Maximum number of starts: 20/h Maximum operating depth: 250 m Horizontal operation : 1.5 HP Absorbed power : 1700 W Number of revolutions per minute : 2830 Efficiency : 65% Cable section: 4x1.5 mm Cable length : 1.7m 40L Immersed Engine 4” submersible asynchronous two-pole electric motor, rewindable, built in AISI 304 stainless steel for the parts in contact with water. The cooling and lubrication of the ball bearings is ensured by a special FDA approved liquid. The stator is inserted in an AISI 304L stainless steel jacket fixed by steel pins to the upper motor support. The cable connector is removable to ensure quick and simple maintenance operations Construction features Rewindable stator with external jacket in AISI 304L. The stator has 24 slots for greater elasticity and regularity of operation; Class H double enamel insulated copper conductors Oversized ball bearings with high axial load. 0.5HP to 2HP: 2000N 3 HP: 3000N From 4HP to 5.5HP: 4000N 7.5HP to 10HP: 5000N Shafts with terminal in AISI 304/Duplex, with a particular surface hardening process. Squirrel cage rotor in aluminum for powers up to 3HP, in copper for motors with power higher than 4HP Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product Code : 4OL 1.5 kW Power supply : 3 x 400V ~ 50Hz Power : 1,5 kW (2 HP) Flanging : NEMA 4" Insulation class : F Degree of Protection : IP 68 Cooling Flow Velocity : Min. 0,3 m/s 35°C Maximum number of starts: 20/h Maximum operating depth: 250 m Horizontal operation : 2 HP Absorbed power : 2160 W Number of revolutions per minute : 2810 Efficiency : 69% Cable section: 4x1.5 mm Cable length : 1.7m 40L Immersed Engine 4” submersible asynchronous two-pole electric motor, rewindable, built in AISI 304 stainless steel for the parts in contact with water. The cooling and lubrication of the ball bearings is ensured by a special FDA approved liquid. The stator is inserted in an AISI 304L stainless steel jacket fixed by steel pins to the upper motor support. The cable connector is removable to ensure quick and simple maintenance operations Construction features Rewindable stator with external jacket in AISI 304L. The stator has 24 slots for greater elasticity and regularity of operation; Class H double enamel insulated copper conductors Oversized ball bearings with high axial load. 0.5HP to 2HP: 2000N 3 HP: 3000N From 4HP to 5.5HP: 4000N 7.5HP to 10HP: 5000N Shafts with terminal in AISI 304/Duplex, with a particular surface hardening process. Squirrel cage rotor in aluminum for powers up to 3HP, in copper for motors with power higher than 4HP Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: DIVER 150 MA single-phase Power supply: 1 x 230V~50Hz Power: 1kW (1.5HP) Capacitor: 30mF Operating range: flow rate up to 80 l/min (4.8 m3/h) with head up to 80 metres. DAB PUMPS  There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics DIVER 5" submersible monobloc multistage electric pumps DIVER electric pumps are used in systems for lifting clear water from wells, first collection tanks or cisterns, Roman wells or streams and are suitable for the distribution of pressurized water in domestic systems, small agriculture, sprinkler irrigation of gardens and vegetable gardens. The pump, particularly silent, used inside wells or tanks avoids all the problems related to suction and deactivation. General characteristics of the series: Operating range: from 0.6 to 12 m3 /h with head up to 96 metres Pumped liquid: clean, without solid or abrasive bodies, non-aggressive Max presence of sand in the water: 50 gr/m3 Liquid temperature range: from 0°C to +35°C Maximum immersion: 20m Delivery port diameter: 1” 1/4 GAS Power Tolerance: +6% / -10% Maximum number of starts: 20/h Motor protection degree: IP 68 Engine protection class: F Installation: in wells, tanks and cisterns, in vertical position. Special executions on request: other voltages and/or frequencies. automatic version with float Construction features of the pump Submersible monobloc multistage pump with the hydraulic part under the motor which is cooled by the pumped liquid. Impellers and diffusers in Noryl reinforced with glass fiber with wear-resistant wear ring in stainless steel. External jacket, stator jacket, upper head with sleeve and closing ring in AISI 304 steel. Encapsulated stator. Cast iron supports. Rotor shaft extension in AISI 304. Motor side lip seal and silicon carbide/silicon carbide mechanical seal on pump side. Engine construction features Two-pole asynchronous type submersible built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L. Squirrel cage rotor mounted on ball bearings, and oversized to guarantee silence, reliability and durability. Upon request, the single-phase version is supplied with the CONTROL BOX. Protection by the user for the three-phase version. Automatic version with float available. The version with support base and side suction (DRY) is available on request. Degree of protection: IP68 Insulation class: F Series voltage: single-phase 230V/50Hz three-phase 400V/50Hz Power cord: H07RN-F detachable, length 10 meters. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product Code : 4OL 1.5 kW Power supply : 1 x 220 - 240V ~ 50Hz Power : 1,5 kW (2HP) Flanging : NEMA 4" Insulation class : F Degree of Protection : IP 68 Cooling Flow Velocity : Min. 0,3 m/s 35°C Maximum number of starts: 20/h Maximum operating depth: 250 m Horizontal operation : 2 HP Absorbed power : 2160 W Number of revolutions per minute : 2800 Efficiency : 69% Cable section: 4x1.5 mm Cable length : 1.7m 40L Immersed Engine 4” submersible asynchronous two-pole electric motor, rewindable, built in AISI 304 stainless steel for the parts in contact with water. The cooling and lubrication of the ball bearings is ensured by a special FDA approved liquid. The stator is inserted in an AISI 304L stainless steel jacket fixed by steel pins to the upper motor support. The cable connector is removable to ensure quick and simple maintenance operations Construction features Rewindable stator with external jacket in AISI 304L. The stator has 24 slots for greater elasticity and regularity of operation; Class H double enamel insulated copper conductors Oversized ball bearings with high axial load. 0.5HP to 2HP: 2000N 3 HP: 3000N From 4HP to 5.5HP: 4000N 7.5HP to 10HP: 5000N Shafts with terminal in AISI 304/Duplex, with a particular surface hardening process. Squirrel cage rotor in aluminum for powers up to 3HP, in copper for motors with power higher than 4HP Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code : IDEA 150 M Power supply : 3 x 400V ~ ~ 50Hz Power : 1 kW (1.5 HP) Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral, close to the characteristics of water Liquid Temperature Range : from 0°C to +35°C Maximum immersion : 20 metres Delivery port diameter: 1" Gas Power Tolerance : +6% / -10% Maximum number of starts: 20/h Installation : in wells of 4" or larger, tanks and cisterns, in vertical position. Special executions on request: other voltages and/or frequencies Motor Protection Degree: IP 68 Insulation class : F Power Cord : H07RN-F detachable, length 15 meters , Nylon Cord, length 15 meters IDEA Peripheral Submersible Electric Pumps 4" Applications Single-impeller (version 75 and 100) or twin-impeller (version 150) submersible peripheral pump for 4" or larger wells, capable of developing high heads for limited power. Suitable for lifting and distributing water in domestic systems, small agriculture, pressurization of autoclave groups and hobby applications Construction features of the pump • Pump body and motor support in cast iron • Impeller in brass • Rotor shaft extension and stainless steel filter Construction Characteristics of the Engine • Submersible two-pole asynchronous type built completely in stainless steel, dry and cooled from the outside by the pumped liquid. Stator encapsulated in AISI 304L • Squirrel cage rotor mounted on ball bearings, and oversized to ensure reliability and durability • Mechanical seal in graphite/alumina and lip seal • In the single-phase version, the run capacitor is housed in a sturdy, electrically insulated, high-density plastic container • Protection by the user for the three-phase version Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product Code : 4OL 0.75 kW Power supply : 1 x 220 - 240V ~ 50Hz Power : 0.75 kW (1 HP) Flanging : NEMA 4" Insulation class : F Degree of Protection : IP 68 Cooling Flow Velocity : Min. 0,3 m/s 35°C Maximum number of starts: 20/h Maximum operating depth: 250 m Horizontal operation : 1 HP Absorbed power : 1275 W Number of revolutions per minute : 2820 Efficiency : 59% Cable section: 4x1.5 mm Cable length : 1.7m 40L Immersed Engine 4” submersible asynchronous two-pole electric motor, rewindable, built in AISI 304 stainless steel for the parts in contact with water. The cooling and lubrication of the ball bearings is ensured by a special FDA approved liquid. The stator is inserted in an AISI 304L stainless steel jacket fixed by steel pins to the upper motor support. The cable connector is removable to ensure quick and simple maintenance operations Construction features Rewindable stator with external jacket in AISI 304L. The stator has 24 slots for greater elasticity and regularity of operation; Class H double enamel insulated copper conductors Oversized ball bearings with high axial load. 0.5HP to 2HP: 2000N 3 HP: 3000N From 4HP to 5.5HP: 4000N 7.5HP to 10HP: 5000N Shafts with terminal in AISI 304/Duplex, with a particular surface hardening process. Squirrel cage rotor in aluminum for powers up to 3HP, in copper for motors with power higher than 4HP Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code : DTRON 3 35/90 Power supply : 220~240/50/1 Power : 0.52 kW (0.7 HP) Maximum flow : Up to 100 l/min Maximum head : Up to 36 m Maximum ambient and liquid temperature: 50°C Factory cut-in : 2.4 bar (±0.2) Flanging or delivery thread : Threaded 1" 1/4 Dimensions : 651x185mm New DTron 3 series The evolution of the submerged autoclave 43 years of experience. An unstoppable drive towards innovation. Constant communication with all markets. This is the ecosystem in which DAB products are born and evolve. The new DTron series is proof of this: an important step forward in redefining the characteristics of submersible pumps , made with the security of the market leader DTron 2 and DTron 3 are born from the desire to create a range of "easy" but extremely efficient pumps . Technologically advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories. DTron 3 Together with a series of fully integrated and modular accessories, they represent an offer of solutions for every use in different types of installations. The customized value For Dab it is essential to design solutions according to the real needs of all the players in the sector The new DTron submersible pumps guarantee advantages for installers, distributors and end users by saving them space, time and costs A large, constant and rapid evolution possible only thanks to the attention and listening of our top market experts: you. A Global Listen We move water all over the world, with over 2 million pumps installed every year we are also able to handle special needs. In Australia where nature still has a dominant role in the territory, the functioning of our products is put to the test by insects and small reptiles that infiltrate the pumps to make their den Thanks to this experience DAB has designed the new models of the DTron range making them unassailable by any external agent, solving the case that emerged in Australia and in fact making our solutions even safer in all geographical areas of the world Experiences and Innovation 43 years of experience, an unstoppable drive towards innovation and constant communication with all markets. This is the ecosystem in which DAB products are born and evolve The new DTron series is proof of this: an important step forward in redefining the characteristics of pumps submerged, made with the safety of the market leader DTron 3 was created to create a range of "easy" but extremely efficient pumps. Very advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories Integrated vase A quick and easy installation. A more essential and less bulky system. Greater reliability in time. The expansion vessel improves the pressure tightness of the system, avoiding unnecessary restarts, reducing water hammer and lengthening the life of the pump. With this integrated component, installation times are reduced NFC technology A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. NFC (Near Field Communication) allows the use of pumps with float and level sensor* without the need for any additional wiring. The accessories attach without having to disassemble the pump body. All this guarantees speed and reliability. PLC technology Only for DTron 3 A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. PLC (Power Line Communication) allows the use of the Com Box electronic control device without the need for any physical connection but through the electric power supply line. DConnect With DConnect Box 2 you access the DAB cloud service. The new App allows you to manage and monitor the system pressure, the alarms and the residual availability of water in the tank directly from your smartphone or tablet wherever you are! DTron 3 thus becomes the first submersible pump equipped with a display DOC68 Maximum installation flexibility. The ultimate in waterproofing. The maximum of unassailability. With this accessory and the IP68 certification, DTron pumps can also be installed out of the water, thus transforming submersible pumps into real traditional autoclaves Vent valve Benefits during installation and throughout use. The vent valve allows for immediate priming upon first installation and always guarantees the correct functioning of the pump. Facilitated maintenance Modular and functional construction. Thanks to the modular components of the pump it is possible to make maintenance easier. Elements that can be disassembled, repaired and replaced separately which simplify the management of any problems, reducing maintenance costs. Com Box Only for DTron 3 More comfortable. Smarter. With Com Box you can intervene on the pump pressure parameters and view any alarms. No direct connection to the pump is required (PLC Optional accessories X-Kit for the X version Combined with the X version, it allows the suction of water at a level such as to avoid the pumping of dust and sludge present on the bottom of wells and tanks DOC68 With the DOC68 it is possible to install DTron also outdoors as an IP68 certified surface pump Floating Allows the water level of the tank to be detected, preventing emptying of the same, and the pump to go into blockage, avoiding dry running due to too low a water level Level sensor Only for DTron 3 Connected to the DConnect Box 2, it checks the water level in the tank and communicates it to the user via the App (only on DTron 3) COM Box Only for DTron 3 It allows you to change the start and stop pressure and to check any pump alarms, in an easy and intuitive way DConnect Box 2 Only for DTron 3 Thanks to DConnect Box 2 you can control the pump, set the start and stop parameters, see alarm details and monitor the pressure directly from your smartphone, obtaining the best performance and lightness of maintenance never seen before Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code : DTRON 3 45/90 Power supply : 220~240/50/1 Power : 0.6kW (0.8HP) Maximum flow : Up to 105 l/min Maximum head : Up to 43 m Maximum ambient and liquid temperature: 50°C Factory cut-in : 2.4 bar (±0.2) Flanging or delivery thread : Threaded 1" 1/4 Dimensions : 651x185mm New DTron 3 series The evolution of the submerged autoclave 43 years of experience. An unstoppable drive towards innovation. Constant communication with all markets. This is the ecosystem in which DAB products are born and evolve. The new DTron series is proof of this: an important step forward in redefining the characteristics of submersible pumps , made with the security of the market leader DTron 2 and DTron 3 are born from the desire to create a range of "easy" but extremely efficient pumps . Technologically advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories. DTron 3 Together with a series of fully integrated and modular accessories, they represent an offer of solutions for every use in different types of installations. The customized value For Dab it is essential to design solutions according to the real needs of all the players in the sector The new DTron submersible pumps guarantee advantages for installers, distributors and end users by saving them space, time and costs A large, constant and rapid evolution possible only thanks to the attention and listening of our top market experts: you. A Global Listen We move water all over the world, with over 2 million pumps installed every year we are also able to handle special needs. In Australia where nature still has a dominant role in the territory, the functioning of our products is put to the test by insects and small reptiles that infiltrate the pumps to make their den Thanks to this experience DAB has designed the new models of the DTron range making them unassailable by any external agent, solving the case that emerged in Australia and in fact making our solutions even safer in all geographical areas of the world Experiences and Innovation 43 years of experience, an unstoppable drive towards innovation and constant communication with all markets. This is the ecosystem in which DAB products are born and evolve The new DTron series is proof of this: an important step forward in redefining the characteristics of pumps submerged, made with the safety of the market leader DTron 3 was created to create a range of "easy" but extremely efficient pumps. Very advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories Integrated vase A quick and easy installation. A more essential and less bulky system. Greater reliability in time. The expansion vessel improves the pressure tightness of the system, avoiding unnecessary restarts, reducing water hammer and lengthening the life of the pump. With this integrated component, installation times are reduced NFC technology A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. NFC (Near Field Communication) allows the use of pumps with float and level sensor* without the need for any additional wiring. The accessories attach without having to disassemble the pump body. All this guarantees speed and reliability. PLC technology Only for DTron 3 A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. PLC (Power Line Communication) allows the use of the Com Box electronic control device without the need for any physical connection but through the electric power supply line. DConnect With DConnect Box 2 you access the DAB cloud service. The new App allows you to manage and monitor the system pressure, the alarms and the residual availability of water in the tank directly from your smartphone or tablet wherever you are! DTron 3 thus becomes the first submersible pump equipped with a display DOC68 Maximum installation flexibility. The ultimate in waterproofing. The maximum of unassailability. With this accessory and the IP68 certification, DTron pumps can also be installed out of the water, thus transforming submersible pumps into real traditional autoclaves Vent valve Benefits during installation and throughout use. The vent valve allows for immediate priming upon first installation and always guarantees the correct functioning of the pump. Facilitated maintenance Modular and functional construction. Thanks to the modular components of the pump it is possible to make maintenance easier. Elements that can be disassembled, repaired and replaced separately which simplify the management of any problems, reducing maintenance costs. Com Box Only for DTron 3 More comfortable. Smarter. With Com Box you can intervene on the pump pressure parameters and view any alarms. No direct connection to the pump is required (PLC Optional accessories X-Kit for the X version Combined with the X version, it allows the suction of water at a level such as to avoid the pumping of dust and sludge present on the bottom of wells and tanks DOC68 With the DOC68 it is possible to install DTron also outdoors as an IP68 certified surface pump Floating Allows the water level of the tank to be detected, preventing emptying of the same, and the pump to go into blockage, avoiding dry running due to too low a water level Level sensor Only for DTron 3 Connected to the DConnect Box 2, it checks the water level in the tank and communicates it to the user via the App (only on DTron 3) COM Box Only for DTron 3 It allows you to change the start and stop pressure and to check any pump alarms, in an easy and intuitive way DConnect Box 2 Only for DTron 3 Thanks to DConnect Box 2 you can control the pump, set the start and stop parameters, see alarm details and monitor the pressure directly from your smartphone, obtaining the best performance and lightness of maintenance never seen before Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product Code : 4OL 2.2 kW Power supply : 1 x 220 - 240V ~ 50Hz Power : 2,2 kW (3 HP) Flanging : NEMA 4" Insulation class : F Degree of Protection : IP 68 Cooling Flow Velocity : Min. 0,3 m/s 35°C Maximum number of starts: 20/h Maximum operating depth: 250 m Horizontal operation : 2.2 HP Absorbed power : 3060 W Number of revolutions per minute : 2800 Efficiency : 78% Cable section: 4x1.5 mm Cable length : 1.7m 40L Immersed Engine 4” submersible asynchronous two-pole electric motor, rewindable, built in AISI 304 stainless steel for the parts in contact with water. The cooling and lubrication of the ball bearings is ensured by a special FDA approved liquid. The stator is inserted in an AISI 304L stainless steel jacket fixed by steel pins to the upper motor support. The cable connector is removable to ensure quick and simple maintenance operations Construction features Rewindable stator with external jacket in AISI 304L. The stator has 24 slots for greater elasticity and regularity of operation; Class H double enamel insulated copper conductors Oversized ball bearings with high axial load. 0.5HP to 2HP: 2000N 3 HP: 3000N From 4HP to 5.5HP: 4000N 7.5HP to 10HP: 5000N Shafts with terminal in AISI 304/Duplex, with a particular surface hardening process. Squirrel cage rotor in aluminum for powers up to 3HP, in copper for motors with power higher than 4HP Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Wilo multistage monobloc electric pump with 5" stainless steel submersible motor TWI5 305 EM 4144948 General characteristics Brand: Wilo Model: TWI5 305 EM Code: 4144948 Technical data sheet Description Monobloc multistage pump with 5” submersible motor in stainless steel for vertical or horizontal installation. Field of application Residential and commercial applications Water pressurization Irrigation Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code : DTRON 3 35/120 Power supply : 220~240/50/1 Power : 0.6 kW (0.8 HP) Maximum ambient and liquid temperature: 50°C Factory cut-in : 2.4 bar (±0.2) Flanging or delivery thread : Threaded 1" 1/4 Dimensions : 651x185mm New DTron 3 series The evolution of the submerged autoclave 43 years of experience. An unstoppable drive towards innovation. Constant communication with all markets. This is the ecosystem in which DAB products are born and evolve. The new DTron series is proof of this: an important step forward in redefining the characteristics of submersible pumps , made with the security of the market leader DTron 2 and DTron 3 are born from the desire to create a range of "easy" but extremely efficient pumps . Technologically advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories. DTron 3 Together with a series of fully integrated and modular accessories, they represent an offer of solutions for every use in different types of installations. The customized value For Dab it is essential to design solutions according to the real needs of all the players in the sector The new DTron submersible pumps guarantee advantages for installers, distributors and end users by saving them space, time and costs A large, constant and rapid evolution possible only thanks to the attention and listening of our top market experts: you. A Global Listen We move water all over the world, with over 2 million pumps installed every year we are also able to handle special needs. In Australia where nature still has a dominant role in the territory, the functioning of our products is put to the test by insects and small reptiles that infiltrate the pumps to make their den Thanks to this experience DAB has designed the new models of the DTron range making them unassailable by any external agent, solving the case that emerged in Australia and in fact making our solutions even safer in all geographical areas of the world Experiences and Innovation 43 years of experience, an unstoppable drive towards innovation and constant communication with all markets. This is the ecosystem in which DAB products are born and evolve The new DTron series is proof of this: an important step forward in redefining the characteristics of pumps submerged, made with the safety of the market leader DTron 3 was created to create a range of "easy" but extremely efficient pumps. Very advanced but simple to use. Reliable and performing, in the various applications, thanks also to a set of intelligent accessories Integrated vase A quick and easy installation. A more essential and less bulky system. Greater reliability in time. The expansion vessel improves the pressure tightness of the system, avoiding unnecessary restarts, reducing water hammer and lengthening the life of the pump. With this integrated component, installation times are reduced NFC technology A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. NFC (Near Field Communication) allows the use of pumps with float and level sensor* without the need for any additional wiring. The accessories attach without having to disassemble the pump body. All this guarantees speed and reliability. PLC technology Only for DTron 3 A simple and constant control of the pump. Maximum ease and autonomy in the installation of accessories. PLC (Power Line Communication) allows the use of the Com Box electronic control device without the need for any physical connection but through the electric power supply line. DConnect With DConnect Box 2 you access the DAB cloud service. The new App allows you to manage and monitor the system pressure, the alarms and the residual availability of water in the tank directly from your smartphone or tablet wherever you are! DTron 3 thus becomes the first submersible pump equipped with a display DOC68 Maximum installation flexibility. The ultimate in waterproofing. The maximum of unassailability. With this accessory and the IP68 certification, DTron pumps can also be installed out of the water, thus transforming submersible pumps into real traditional autoclaves Vent valve Benefits during installation and throughout use. The vent valve allows for immediate priming upon first installation and always guarantees the correct functioning of the pump. Facilitated maintenance Modular and functional construction. Thanks to the modular components of the pump it is possible to make maintenance easier. Elements that can be disassembled, repaired and replaced separately which simplify the management of any problems, reducing maintenance costs. Com Box Only for DTron 3 More comfortable. Smarter. With Com Box you can intervene on the pump pressure parameters and view any alarms. No direct connection to the pump is required (PLC Optional accessories X-Kit for the X version Combined with the X version, it allows the suction of water at a level such as to avoid the pumping of dust and sludge present on the bottom of wells and tanks DOC68 With the DOC68 it is possible to install DTron also outdoors as an IP68 certified surface pump Floating Allows the water level of the tank to be detected, preventing emptying of the same, and the pump to go into blockage, avoiding dry running due to too low a water level Level sensor Only for DTron 3 Connected to the DConnect Box 2, it checks the water level in the tank and communicates it to the user via the App (only on DTron 3) COM Box Only for DTron 3 It allows you to change the start and stop pressure and to check any pump alarms, in an easy and intuitive way DConnect Box 2 Only for DTron 3 Thanks to DConnect Box 2 you can control the pump, set the start and stop parameters, see alarm details and monitor the pressure directly from your smartphone, obtaining the best performance and lightness of maintenance never seen before Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less