icon Self Priming Pumps and Multistage Centrifuges | CaldaieMurali

Self Priming Pumps and Multistage Centrifuges

Choose from different sizes, capacities and wattages to fit your specific pumping needs. Trust the quality and reliability of our self-priming and multistage centrifugal pumps to ensure superior performance and optimum results.

43 products


  • immagine-1-dab-elettropompa-dab-dp-centrifuga-autoadescante-per-aspirazioni-profonde-corpo-pompa-in-ghisa-modello-dp-151-t-ean-99582005

    DAB Dab Dp Self-Priming Centrifugal Electric Pump For Deep Suction Cast Iron Pump Body - Model Dp 151 T

    Technical features Model Self-priming centrifugal electric pump Dab Model DP 151 T Energy efficiency Operating range: up to 4.3 m3/h. Pumped liquid: clean, free from solid or abrasive substances, not viscous, non-aggressive, non-crystallised and chemically neutral, close to the water features. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Installation: fixed in horizontal position. Special executions on request: other voltages and/or frequencies. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220-240V / 50Hz three-phase 230-400V / 50Hz APPLICATIONS Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector (optional) to be introduced in wells of 4" or diameter greater. Used for the water supply of farmhouses and small agriculture. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump: Body and motor support in cast iron. Technopolymer impeller and diffuser. Stainless steel shim ring. Mechanical seal in carbon/ceramic. Ejector: Cast iron body. Venturi tube in technopolymer A and brass nozzle. The ejector is available in three models (E 20 - E 25 - E 30) depending on the performance required. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Rotor mounted on greased-for-life and oversized ball bearings. Built-in thermo-amperometric protection and capacitor permanently inserted in single-phase motors. For the protection of the three-phase motor it is recommended to use a motor protection switch in compliance with the norms. Construction according to CEI 61-69 (EN 60335-2-41) standards. Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector to be introduced in wells of 4” or greater diameter. Used for the water supply of farmhouses and small agriculture. Operating range: up to 4.3 m3/h. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Self-priming: up to 27 metres. Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €347,00

  • immagine-1-dab-elettropompa-centrifuga-autoadescante-dab-jet-151-m-hp-15-monofase-99219000

    DAB Dab Jet 151 M Hp 1.5 Single-Phase Self-Priming Centrifugal Electric Pump 99219000

    Technical features Model: JET 151 M single-phase Code: 102160062 Power supply: 1 x 220-240V~50Hz Power: 1.1kW (1.5HP) Capacitor capacity: 31.5mF Operating range: flow rate up to 75 l/min (4.5 m3/h) with heads up to 61 metres. Liquid temperature range: from 0°C to +35°C or 40°C Maximum working pressure : 8 bar (800 kPa) Maximum ambient temperature: +40°C. To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics JET Self-priming centrifugal electric pumps DOMESTIC WATER SUPPLY Self-priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Particularly suitable for water supply in domestic systems, small-scale agriculture, gardening and in general where the self-priming function is required. Jet: pump body in cast iron. Motor support in cast iron, impeller, diffuser, Venturie tube in technopolymer sand guard. Stainless steel shim rings. Mechanical seal in carbon/ceramic. Asynchronous type motor, enclosed and cooled by external ventilation. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. To protect the three-phase motor, the use of a motor protection switch is recommended in accordance with current standards. Series features: Operating range: from 0.4 to 10.5 m3/h with heads up to 62 metres. Liquid temperature range: from 0°C to +35°C for domestic use (EN60335-2-41) from 0°C to +40°C for other uses. Pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallised and chemically neutral. Maximum ambient temperature: + 40°C. Maximum working pressure: 6 bar (600 kPa) for Jet and Jetcom. 8 bar (800 kPa) for Jetinox and jet 200-300-151-251. Degree of protection: IP 44 (IP 55 at the terminal board). Insulation class: F Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €327,00

  • immagine-1-wilo-elettropompa-wilo-centrifuga-multistadio-monofase-versione-autoadescante-himulti-3-25-p15230-4244149

    Wilo Wilo Centrifugal Electric Pump Multistage Single-Phase Self-Priming Version Himulti 3-25 P/1/5/230 4244149

    Wilo single-phase multistage centrifugal electric pump self-priming version HIMULTI 3-25 P/1/5/230 4244149 General characteristics Brand: Wilo Model: HIMULTI 3-25 P/1/5/230 Code: 4244149 Data sheet Description Field of applications: Residential and commercial applications Water pressurization Irrigation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €235,00

  • immagine-1-dab-elettropompa-centrifuga-multistadio-dab-euro-3080-m-hp-11-monofase-99455033

    DAB Multistage Centrifugal Electric Pump Dab Euro 30/80 M Hp 1.1 Single-Phase 99455033

    Technical features Model : Euro 30 / 80 M single-phase Code : 102970140 Number of impellers : 4 Power : 0.8 kW (1.1 HP) Capacitor capacity : 25mF Operating range : Flow rate up to 120 l/min (7.2 m3/h) with heads up to 47.3 metres. Maximum working pressure : 8 bar (800 kPa) General characteristics Multistage centrifugal EURO electric pump, pump body in cast iron. Horizontal axis multistage centrifugal pump, characterized by extremely silent operation, suitable for domestic use for water supply and pressurization, irrigation of orchards and gardens, movement of water in general. Advantages Pump body in 200 UNI ISO 185 cast iron engine mount in die-cast aluminium seal holder cover in AISI 304 steel Mechanical seal in carbon/ceramic Motor shaft in AISI 304 steel Impellers, diffuser bodies and diffusers in technopolymer Stainless steel shim rings Features of the series Motor protection degree : IP 44 Degree of protection of the terminal block: IP 55 Insulation class : F Operating range : From 10 to 120 l/min with head up to 72 metres Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water Liquid temperature range : From 0°C to +35°C for domestic use (EN 60335-2-41). From o°C to +40°C for other uses Maximum working pressure : 8 bar (800 kPa) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €268,00

  • immagine-1-ebara-elettropompa-autoadescante-ebara-modello-jesxm-8-hp-08-kw-06-in-acciao-inox-monofase

    Ebara Ebara Self-Priming Electric Pump Model Jesxm 8* Hp 0.8 Kw 0.6 In Single-Phase Stainless Steel

    Technical features Model : JESXM 8 HP power 0.8 KW: 0.6 Max flow rate at 37mt 5 l/min, 0.3 m3/h Max pressure: 6 Bars Max temperature: 45°C Suction depth: 8m Poles: 2 Insulation class: F Degree of protection: IP54 Voltage 230V Pump body: AISI 304 stainless steel Impeller: PPE+PS with glass fibers Shaft: AISI 303 stainless steel Mechanical seal: Ceramic/carbon/NBR Engine Mount: Aluminum Impeller in glass fiber reinforced PPO EBARA Over 20 years of experience in the construction of electric pumps for the industrial and domestic market with a multinational company with over one hundred years of experience behind it. It is a philosophy that unites three inseparable concepts: quality , avant-garde and life . Each EBARA product is designed and built to achieve the highest levels of functionality, guaranteed by a rigorous and complete quality control program which involves the entire manufacturing cycle. EBARA centrifugal electric pumps, covered by several international patents, represent the future in fluid pumping. The stainless steel electric pumps are made through a completely robotic process which allows the optimization of the use of materials, rapid changes of the production line, high levels of standardization, quality control in line. Thanks to the construction technique acquired from the Japanese parent company, the EBARA stainless steel electric pumps are distinguished by their unmistakable hydraulic design. Two production plants , in Veneto (Brendola) and in Trentino (Cles). The Cles production line, fully automated and robotic, is designed to maximize the use of raw materials, allowing the creation of products at the highest levels of standardization and efficiency and minimizing energy requirements. The manufacturing processes are carefully structured to optimize the quality and reliability of the products. The experience accumulated over many years of activity, the ISO 9001 certification and the flexible manufacturing process, supported by advanced information systems (CAD, CAM, SAP), are synonymous with Quality: of the product, of the service, of the brand. JESX-JEX Self-priming electric pumps in AISI 304 stainless steel Applications: Drinking water supply Domestic pressurization Small garden irrigation Emptying tanks and pools Movement of clean water in general Technical features: Practice Easily transportable Light Pump technical data: Maximum working pressure: 6 bar Maximum liquid temperature: 45°C Maximum suction depth: 8 m Suction port G1 for JESX, G1¼ for JEX G1 delivery connection Engine technical data: IE2 and IE3 energy efficient motors starting from 0.75kW Self-ventilated 2-pole asynchronous motor Insulation class F Degree of protection IP54 (on request IP55) Single-phase voltage 230V ±10% 50Hz, three-phase voltage 230/400V ±10% 50Hz Permanently inserted capacitor and built-in automatic reset thermo-amperometric protection for the single-phase motor Protection by the user for the three-phase version Materials: Pump body and seal holder disc in AISI 304 Shaft in AISI 303 (part in contact with the liquid) Impeller in AISI 304 for JEX, in PPE+PS reinforced with glass fibers for JESX Venturi unit plus glass fiber reinforced PPO diffuser Mechanical seal in Ceramic/Carbon/NBR Aluminum support and motor case Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

    €171,00

  • immagine-1-dab-elettropompa-dab-dp-centrifuga-autoadescante-per-aspirazioni-profonde-corpo-pompa-in-ghisa-modello-dp-102-m-ean-99330583

    DAB Dab Dp Self-Priming Centrifugal Electric Pump For Deep Suction Cast Iron Pump Body - Model Dp 102 M

    Technical features Model Self-priming centrifugal electric pump Dab Model DP 102M Energy efficiency Operating range: up to 4.3 m3/h. Pumped liquid: clean, free from solid or abrasive substances, not viscous, non-aggressive, non-crystallised and chemically neutral, close to the water features. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Installation: fixed in horizontal position. Special executions on request: other voltages and/or frequencies. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220-240V / 50Hz three-phase 230-400V / 50Hz APPLICATIONS Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector (optional) to be introduced in wells of 4" or diameter greater. Used for the water supply of farmhouses and small agriculture. CONSTRUCTION CHARACTERISTICS OF THE PUMP Pump: Body and motor support in cast iron. Technopolymer impeller and diffuser. Stainless steel shim ring. Mechanical seal in carbon/ceramic. Ejector: Cast iron body. Venturi tube in technopolymer A and brass nozzle. The ejector is available in three models (E 20 - E 25 - E 30) depending on the performance required. CONSTRUCTION CHARACTERISTICS OF THE ENGINE Rotor mounted on greased-for-life and oversized ball bearings. Built-in thermo-amperometric protection and capacitor permanently inserted in single-phase motors. For the protection of the three-phase motor it is recommended to use a motor protection switch in compliance with the norms. Construction according to CEI 61-69 (EN 60335-2-41) standards. Self-priming centrifugal pump for suctions up to 27 meters, reached through the use of the ejector to be introduced in wells of 4” or greater diameter. Used for the water supply of farmhouses and small agriculture. Operating range: up to 4.3 m3/h. Liquid temperature range: from 0°C to +35°C domestic use (EN 60335-2-41). from 0°C to +40°C for other uses. Self-priming: up to 27 metres. Maximum working pressure: DP 82 - DP 102 6 bar (600 kPa). DP 151 - DP 251 8 bar (800 kPa). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €214,00

  • immagine-1-dab-elettropompa-centrifuga-multistadio-dab-euroinox-5050-m-hp-136-monofase-99330668

    DAB Dab Euroinox 50/50 M Multistage Centrifugal Electric Pump Hp 1.36 Single-Phase 99330668

    Technical features Model: EUROINOX 50/50 M single-phase with pump body in stainless steel N° impellers: 5 Power supply: 1 x 230V~50Hz Power: 1kW (1.36HP) Capacitor capacity: 25mF Operating range: flow rate up to 80 l/min (4.8 m3/h) with heads up to 72 metres. Maximum working pressure : 8 bar (800 kPa) To view more product information (dimensions, absorption) CLICK HERE and consult the attached images. DAB PUMPS There is a name in the electric pump sector that has been synonymous with high technology and reliability all over the world for over 30 years. This name is DAB, a company that has been designing and building electric pumps since 1975 with a very specific viewpoint: that of responding to the increasingly demanding market demands not only with products that attest to the highest levels of quality, but also with an efficient service and versatile. 35 years of experience and innovation Founded in 1975 in Veneto, DAB PUMPS SpA is today an international point of reference in the water handling sector. Its core business concerns the design, production and sale of electric hydraulic pumps able to satisfy any need for any type of domestic and professional application. A network as big as the world During its 35 years of constant growth, DAB PUMPS has also developed a sales network and technical assistance centers which provide widespread coverage of the national and international market. In addition to its 5 production plants located in Italy, the corporate structure is made up of 9 foreign branches and numerous distributors all over the world. The most reliable products With over 2 million pieces produced every year, DAB PUMPS electric pumps have become synonymous with high technology and reliability. DAB has a very wide range of water pumps, suitable for every need, made with cutting-edge materials that make them increasingly resistant to internal and external stresses, capable of guaranteeing high performance, quality and resistance over the long term, limiting the environmental impact. DAB pumps are the result of continuous research and technology, elements that try to offer flexible and easy-to-use solutions in every field of application. The specific attention that the company places on the materials and the homologation procedures to which each line is subjected before the production release, allows DAB PUMPS to simultaneously ensure the highest degree of resistance and the maximum performance of its products. General characteristics EUROINOX Multistage centrifugal electric pumps DOMESTIC WATER SUPPLY Horizontal axis multistage centrifugal pump, characterized by extremely silent operation, suitable for domestic use for water supply and pressurization, irrigation of orchards and gardens, movement of water in general. Series features: Operating range: from 10 to 120 litres/min. with head up to 72 m. Pumped liquid: clean, free from solid or abrasive substances, non viscous, non aggressive, non crystallized and chemically neutral, close to the characteristics of water. Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41) from 0°C to +40°C for other uses. Maximum ambient temperature: +40°C Maximum working pressure: 8 bar (800 kPa) Installation: fixed or portable in horizontal position. Motor protection degree: IP 44 Degree of protection on the terminal block: IP 55 Insulation class: F Series voltage: single-phase 220/240 V - 50 Hz - 2 poles three-phase 230/400 V - 50 Hz - 2 poles Construction features of the pump: Pump body in stainless steel. Motor support in die-cast aluminium, seal holder cover in AISI 304 steel. Mechanical seal in carbon/ceramic. Rotor shaft in AISI 304 steel. Impellers, diffuser bodies and diffusers in technopolymer. Stainless steel shim rings. Engine construction features: Continuous duty asynchronous motor. Built-in thermo-amperometric protection and capacitor permanently inserted for the single-phase version. Protection by the user for the three-phase version. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

    €294,00

Recently viewed products

Login

Forgot your password?

Don't have an account yet?
Create account