Magnetic dirt separator under boiler RBM mod. MG1 3/4 Characteristics Code: 3070.05.00 Size: G 3/4” Plant side connection: M UNI-EN-ISO 228 (ball valve) Boiler side connection: F UNI-EN-ISO 228 (revolving fitting) Cartridge holder body in plastic polymer. AISI 304 stainless steel filter cartridge. Hydraulic seals in EPDM PEROX. MF UNI-EN-ISO 228 threaded connections. Max working pressure 3 Bar Working temperature 0 ÷ +90 °C Neodymium magnet B = 11000 gauss B(T max) / B(T amb)* < 1% * T max = 130 °C - T amb = 21 °C RBM extension RBM's MG1 is the optimal solution for solving system problems due to particle pollution, especially rust and sand, which are formed as a result of corrosion and scale during the normal operation of a system. Thanks to its compact dimensions, it is ideal when the boiler to be protected is installed in a kitchen cupboard or where installation spaces are very limited and the other dirt separators cannot be mounted. With its effective and constant action, the magnetic filter collects all the impurities present in the circuit, preventing them from circulating inside it, thus avoiding wear and damage to the circulator and heat exchanger. Through a fixed path, the fluid is forced to cross multiple zones which alter its motion and filter its contents: THE ONLY REALLY COMPACT, CAN BE INSTALLED EVEN IN SMALL SPACES MAGNETIC DIRT SEPARATOR FILTER UNDER THE BOILER ™ The non-magnetic particles are retained by the meshes of the filter cartridge 1. The sudden change in section slows down the fluid 1 and the particles suspended in it 2. The magnet inside the cylinder attracts all ferrous impurities 3. Non-magnetic particles are retained by the filter cartridge mesh Maximum installation versatility: It is recommended to install MG1 on the return circuit, at the boiler inlet, to protect it from impurities present in the system, especially in the start-up phase. Thanks to its extreme versatility of installation, MG1 can be mounted without distinction with the cartridge/magnet holder body facing frontally or downwards. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SPECIALE per defangatore Magnetico Sotto Caldaia RBM mod. MG1 3/4 (confezione da 6)Caratteristiche Codice: 3070.05.00 Misura: G 3/4”  Attacco lato impianto: M UNI-EN-ISO 228 (valvola a sfera) Attacco lato caldaia: F UNI-EN-ISO 228 (raccordo girevole) Corpo portacartuccia in polimero plastico. Cartuccia filtrante acciaio inox AISI 304. Tenute idrauliche in EPDM PEROX. Attacchi filettati MF UNI-EN-ISO 228. Pressione di esercizio max 3 Bar Temperatura di lavoro 0 ÷ +90 °C Magnete al neodimio B = 11000 gauss B(T max) / B(T amb)* < 1% * T max = 130 °CT amb = 21 °C  RBM MG1 di RBM è la soluzione ottimale per risolvere problemi impiantistici dovuti a inquinamento da particelle, soprattutto ruggine e sabbia, che si formano per effetto della corrosione e delle incrostazioni durante il normale funzionamento di un impianto. Grazie alle dimensioni compatte, è ideale quando la caldaia da proteggere è installata nel pensile di una cucina oppure dove gli spazi di installazione sono molto ridotti e gli altri defangatori non possono essere montati. Con la sua azione efficace e costante, il filtro magnetico raccoglie tutte le impurità presenti nel circuito, impedendone la circolazione all’interno di esso, evitando così l’usura e il danneggiamento del circolatore e dello scambiatore di calore. Mediante un percorso obbligato, il fluido è costretto ad attraversare molteplici zone che ne alterano il moto e ne filtrano il contenuto: L’UNICO VERAMENTE COMPATTO, INSTALLABILE ANCHE IN SPAZI RIDOTTI FILTRO DEFANGATORE MAGNETICO SOTTO-CALDAIA ™ Le particelle non magnetiche sono trattenute dalle maglie della cartuccia filtrante1. L’improvvisa variazione di sezione rallenta il fluido 1 e le particelle in esso sospese2. Il magnete all’interno del cilindro attrae tutte le impurità ferrose3. Le particelle non magnetiche sono trattenute dalle maglie della cartuccia filtranteMassima versatilità di installazione: È consigliato installare MG1 sul circuito di ritorno, in ingresso della caldaia, per proteggerla dalle impurità presenti nell’impianto, soprattutto nella fase di avviamento. Grazie alla sua estrema versatilità d’installazione, MG1 può essere montato indistintamente con corpo porta cartuccia/magnete rivolto frontalmente oppure verso il basso.Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Acid Condensate Neutralizer Filter RBM mod. NT1 3286.05.00 Characteristics Cartridge holder body: Transparent PA polyamide Hose end caps / fittings: Polyamide PA Wall fixing collar: Polymer Neutralizing door net: AISI 304 stainless steel Neutralizing charge: CaCO3 (calcium carbonate) Hydraulic seals: EPDM PEROX RBM extension The installation of condensing boilers is spreading rapidly, also thanks to new regulatory obligations. However, these heat generators produce acid condensate which must be neutralized before being discharged so as not to cause damage to the home system pipes and the environment. With the installation of NT1 downstream of the boiler, the condensate passes inside the neutralizing cartridge, which changes the pH, bringing it back within the established limits, thus allowing it to drain freely, without damaging pipes, sinks or gutters. From acid pH to alkaline pH thanks to the heart in calcium carbonate granules. • Fights acid condensation corrosion • Resistant to chemical agents dissolved in the water vapor which condenses in the boiler • Quick and easy maintenance pH always under control NT1 allows you to keep the pH of the water at the drain always within the optimal limits, even in the event of a long permanence of the condensate liquid in the filter (for example in the case of switching off the system due to inactivity, during the night, etc.) . Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Compact Magnetic Dirt Remover Under Boiler RBM MAG-NET series 3892 3/4" CONSTRUCTION FEATURES Cartridge holder body: Polyamide PA66 + 30% FV Filter cartridge: AISI 304 Hydraulic seals: EPDM PEROX Magnets: B (Tmax) / B (Tamb)* < 1% (where Tmax = 130°C, Tamb = 21°C) Tested according to IEC 60404-5 & ASTM A977 standards neodymium REN35 B= 11000/12000 Gauss Attacks: System return: M 3/4'' Flat seat Boiler inlet: 3/4” swivel nut Flat seat UNI EN ISO 228 TECHNICAL FEATURES Compatible fluid: Water, water + glycol max pressure exercise: 3 Bars Working temperature: 0÷80°C Standard filter filtration degree: 800 µm RBM mag-net Supercompact Interception system included High efficiency Eliminate impurities Fights corrosion Extends the life of the boiler It guarantees the efficiency of the system DESCRIPTION OF THE OPERATING PRINCIPLE Through its effective and constant action, the magnetic filter collects all the impurities present in the system, preventing them from circulating inside it, thus avoiding wear and damage to the rest of the system components, in particular circulators and heat exchangers. heat. Mag-net exerts a continuous protective action on the boiler USE It is recommended to install Mag-net on the return circuit, at the boiler inlet, to protect it from all the impurities present in the system, especially during the start-up phase. Thanks to its compact size, it can be used under the boiler, in systems for domestic use, where installation spaces are very limited and therefore a traditional dirt separator would not fit. FILTRATION DEGREE Mag-net removes magnetic and non-magnetic particles that can cause damage to the installation during the first day of operation. The continuous passage of the fluid through the filter during normal operation of the system in which it is installed gradually leads to the complete removal of dirt. FILTRATION PRINCIPLE: Through a fixed path, the fluid is forced to pass through the mesh of the filter cartridge (800 µm) and enter the filtration chamber. In this filtration chamber through the simultaneous action of: - filter cartridge (direct mechanical filtration) - magnet - design choices regarding the filtration chamber section the water full of debris undergoes a filtration treatment. First of all, the sudden change in section (the filtration chamber has a larger diameter than the duct), slows down the motion of the fluid and consequently the entrainment speed of the particles suspended in it. Larger particles are stopped directly by the mechanical filter. The magnet, placed inside a cylinder positioned in the center of the filtration chamber, attracts all impurities with magnetic characteristics. Incoming stream Filter cartridge Magnet Filtration chamber Outgoing stream In this way all the magnetic (ferrous residues) and non-magnetic (algae, mud, sand, etc.) contaminants present in the system are retained in the filtration chamber. The standard stainless steel cartridge has been designed not to exert excessive resistance to the passage of the fluid (low pressure drops) and acts by direct mechanical filtration without affecting the operation of the heating/cooling system. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less