Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input in heating max/min: Kw 23.5/5.5 Max/min nominal heat input in domestic hot water: Kw 23.5/5.5 Useful thermal power in heating: max/min: Kw 22.9/5.3 Efficiency at nominal heat input (60/80°C): 97.5% Efficiency at nominal heat input (30/50°C): 103.9% Efficiency at 30% at 30°C: 108.2% Max/min heating temperature (high temperatures): 82/35°C Max/min heating temperature (low temp.): 45/25°C Max/min DHW temperature: 60/36 °C Sanitary water production (DT=25°C): lt./min. 13.1 Specific flow rate (first 10' with DT=30°C): lt./min. 10.5 Total absorbed electric power W 87 Degrees of protection of the electrical system IP X5D Dimensions (HxWxD) mm 745 x 400 x 319 Power supply: CNG or LPG General characteristics Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. HS Premium Performance ★★★★ NOx class 5 LCD display. Continuous modulation high efficiency circulator. Modulation ratio 1:4. Arrangement for integration with system configuration through the new Buss Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation (with Sensys). Arrangement for solar system management. Aluminum alloy primary exchanger Sanitary plate heat exchanger. Self-diagnosis system by codes. Increased expansion tank lt.8. Cold water inlet and heating return filters. Protection against freezing, limescale and circulator blocking. Operation only with methane gas Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! THE BOILER IS BORN WITH METHANE. THEREFORE, THE TRANSFORMATION KIT WILL BE SUPPLIED AS STANDARD. FOR INFORMATION, CONTACT THE AUTHORIZED ASSISTANCE CENTER IN YOUR AREA IN ADVANCE Technical features Model : HS Premium Product code : 3301325 Power supply: Methane/LPG Energy efficiency Heating energy efficiency class: A Energy efficiency class for sanitary facilities: A Profile : XL Performance Nominal heat output in heating mode: 5.5 ~ 23.5 Kw Nominal heat output in sanitary mode: 5.5 ~ 23.5 Kw Useful thermal power in heating: 5.3 ~ 22.9 Kw Efficiency at nominal heat output (60/80°C): 97.5% Efficiency at nominal heat output (30/50°C): 103.9% Efficiency at 30% at 30°C: 108.2% High temperature heating temperature: 35° ~ 82°C Low temperature heating temperature: 25° ~ 45°C Sanitary temperature: 36° ~ 60°C Sanitary water production (DT=25°C): 13.1 lt/min Specific flow rate (first 10' with DT=30°C): 10.5 lt/min Total absorbed electrical power: 87 W Electrical system protection levels: IP X5D Dimensions and weight Dimensions (HxWxD): 745x400x319 mm Weight: 32.0 Kg Ariston HS Premium compact condensing boiler Along with heat, a traditional boiler also produces water in the form of steam, usually evacuated through exhaust fumes. Since normal boilers do not treat these fumes before releasing them into the environment, they therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process that, inside the boiler, transforms water from the state of steam back into the liquid state. Constant convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings on the bill, it takes less than three years to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real profit. Imagine what a bill reduced by up to 35% every year, for many years, means for your economies... Zero waste only benefits Today, Ariston combines energy savings with fiscal savings, offering a great opportunity to those who have chosen to replace their old boiler with a condensing one. The Financial Law provides, in fact, specific fiscal incentives for taxpayers. High efficiency circulator with continuous modulation. Modulation ratio 1:4. Ready for integration with system configuration through the new Buss Bridgenet® communication protocol Provision for multi-zone and multi-temperature thermoregulation (with Sensys). Provision of solar system management. Primary exchanger in aluminum alloy Sanitary plate exchanger. Self-diagnosis system using codes. Increased 8 litre expansion vessel. Cold water inlet and heating return filters. Anti-freeze, anti-scale and anti-blocking circulator protection. Product Warranty : All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Power kW 16 Gas category II2H3B/P Type C13-C33 NOx emissions 47 mg/kWh Nominal thermal power 31 kW Minimum thermal power 8.5 kW Modulation range 1:3 Nominal heat input 26 kW Minimum heat input 7.4 kW Maximum nominal pressure 10 bar Minimum operating pressure 0.1 bar Minimum operating flow 3.2 l/min Flow rate with temperature difference (Δt) 25 °C 16 l/min Supply voltage (Freq. 50 HZ) 230 V Maximum absorbed power 44 W Sound power 63 dB(A) Protection type IPX4 Weight 13kg Energy class A M pick profile NEXT EVO X It is the new instantaneous Low NOx sealed chamber gas water heater, characterized by an exclusive design, small dimensions and a new intuitive LCD display which makes it easier to adjust the water temperature. Low NOx: ErP compliant 09/26/2018 Ultra compact: only 16.5 cm deep Temperature control via NTC probes at the inlet and outlet of the exchanger Flame ionization electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.2 bar Operation even with minimum water flow rates up to 2.5 l/min Can be integrated with solar thermal systems IPX4D electrical protection Internal installation * 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. * 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. * 100% BUILT TO LAST Strong and super resistant materials, components and products developed to work in extreme conditions to deliver high-level results with maximum durability High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions. Solar integration Prepared for integration with a solar thermal system. Electronic temperature control Electronic control panel for easier and more immediate use. Led Display Multi-function LCD display, simple and intuitive. Ultra-thin Extremely small footprint that allows for concealed installation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ariston Air Conditioner Inverter PRIOS series 12000 btu C 35 MUD0 R-32 Wi-Fi Optional Class A++/A+ Technical features Indoor unit code 3381255 Outdoor unit code 3381408 System code (indoor + outdoor unit) 3381414 Energy efficiency cooling energy class A++ heating energy class (hottest season) A+++ heating energy class (medium season) A+ SEER 6.1 SCOP (mid season) 4.0 Performance nominal cooling capacity W 3500 (1113-4161) nominal heating capacity W 3689 (1084-4219) nominal absorbed power in cooling (min-max) W 1067 (130-1580) nominal absorbed power in heating (min-max) W 994 (100-1680) indoor unit sound pressure (min/med/max) dB(A) 21 / 25 / 34.5 / 40.5 nominal indoor unit air flow m^3/h 540 dehumidification capacity l/h 1.35 Electrical/installation data IP protection class indoor unit / outdoor unit IPX0 / IP24 power supply and number of phases Hz - V - Ph 50-230-1 Fuse max amperage A 20 liquid pipe diameter inches 1/4'' gas pipe diameter inches 3/8'' max connection length m 25m maximum height difference indoor unit - outdoor unit m 10m Dimensions and weight dimensions PU (LxHxW) mm 805x194x285 EU dimensions (LxHxW) mm 720x270x495 Ariston PRIOS Energy class up to A+++ 2D INVERTER Technology* Compatible with Wi-Fi KIT** GOLDEN FIN treatment for better protection from atmospheric agents Memory function BOOSTER function Check for refrigerant leaks SELF-CLEANING function Ariston Climate Compatible with the new Ariston Clima R32 WiFi kit to connect the product to the internet. Thanks to the ARISTON CLIMA app, customers will always be able to manage and control the climate, remotely or from home, with a simple touch. MEMORY This function allows you to set and memorize both the temperature and the fan speed (also the sleep function if activated) to ensure greater comfort the next time you turn it on. 2D INVERTER / 3D INVERTER* Double inverter in the outdoor unit to modulate fan speed and compressor frequency. Thus obtaining greater efficiency, better management of consumption and effective noise control. The 3D INVERTER models have an additional inverter in the indoor unit to control the noise level in the home. FOLLOW ME More accurate temperature control is possible with the Follow Me function. With the remote control, by sending a signal to the air conditioner, it is possible to perfectly adjust the desired temperature in the exact point of the room where the remote control is located. CHARACTERISTICS R32 Conditioner charged with R32 refrigerant gas, not mixed with lower CO2 emissions and with GWP of 675 SELF-CLEANING By reversing the direction of rotation of the outdoor unit fan, it directs the air flow onto the outdoor exchanger, cleaning it from impurities to ensure a long life of the product. It activates each time it is switched off and during the SELF-CLEAN 1W STAND-BY New absorption optimization logic to cut consumption in standby mode by up to 80% GOLDEN FIN Hydrophilic treatment performed on the heat exchange coils which facilitates the drainage of the condensate water, accelerates defrosting by increasing energy efficiency and protects the outdoor unit from acid rain, salty air and corrosive elements. OPTIMIZED PIPE SECTION Compared with traditional piping, the trapezoidal cross section of the new piping allows more refrigerant to pass through, improving energy efficiency. MULTI-SECTION EVAPORATOR Given the compact size of the indoor unit, the multi-section evaporator makes it possible to optimize the heat exchange spaces by increasing thermal efficiency. 2D INVERTER DC Modulation of compressor frequency and external fan speed. FOLLOW ME The operation of the air conditioner depends on the remote control sensor which detects the actual temperature of the room in which it is located. SILENCE FUNCTION This function allows the air conditioner to set an ultra-minimum indoor unit fan speed, making it extremely quiet environment INTERNAL FAN 12 SPEEDS For each of the three settable speeds (HIGH, MED, LOW), the air conditioner has three sub-speed levels. These, added to the speeds of the dehumidification, turbo and silence functions, allow the air conditioner to have a total of 12 air flow speeds. 5-SPEED OUTDOOR FAN The 5-speed DC fan motor of the outdoor unit increases energy efficiency while maximizing silence. VERTICAL SWING Starts automatic flap swing. AIRFLOW COMFORT In cooling mode the air flow is directed upwards while in heating it is conveyed vertically towards the Bass. This allows for homogeneous temperature distribution in the room, increasing comfort ANTI COLD AIR In heating mode the fan speed of the indoor unit is adjusted to ensure that there is no leakage of cold air in the first moments of operation. TURBO FUNCTION It allows to reach the pre-set temperature in the shortest possible time. AUTO FUNCTION The mode and fan speed are set automatically on the basis of the ambient temperature detected. SWITCHING OFF THE DISPLAY Allows you to switch off the display of the indoor unit, increasing comfort especially at night. SLEEP Automatically adjusts the temperature to make the environment more comfortable during the night AROMATHERAPY Porous filter combined with essential oils (not supplied with the product) for the diffusion of fragrances. ANTI-ODOUR FILTER Removes bad odors and volatile organic compounds. WASHABLE DUST FILTER Removes inclusions in the air. R32 UNIVERSAL INDOOR UNIT Mono/multi R32 universal indoor unit, to optimize space in warehouses. LOW AMBIENT COOLING The air conditioner operates in cooling mode with outside temperatures below 15°C. CHECKING FOR REFRIGERANT LEAKS The air conditioner detects any refrigerant leaks and displays an error message on the display of the indoor unit. INVISIBLE DISPLAY The display is placed behind the panel of the indoor unit for a more elegant design. FLAP AUTO MEMORY Before switching off, the climate control system stores the last position of the flap and restores it the next time it is switched on. MEMORY The air conditioner stores the current operating settings, or restores the previous settings, such as the operating mode, temperature setting, fan speed and sleep function (if activated) TIMER Allows you to turn the air conditioner on and/or off at the desired time. SELF CLEAN Automatically cleans and dries the evaporator, bringing it back to optimal conditions for subsequent operation. SELF-DIAGNOSIS The air conditioner micro-computer monitors any malfunctions and blocks the device in the event of malfunctions, indicating the error code on the display of the indoor unit. AUTORESTART After power is restored, in the event of a power blackout, the air conditioner restarts with the last settings set such as operating mode, temperature, fan speed and flap position ANTI-RUST TREATMENT Anti-rust treatment on the metal bodies of the outdoor unit to prevent the formation of rust over time. FLEXIBLE CONDENSATE DRAIN The indoor unit condensate drain pipe can be positioned both on the same side of the refrigerant pipes, and on the opposite side, for a more flexible installation of the air conditioner. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ariston Air Conditioner Inverter PRIOS series 9000 btu C 25 MUD0 R-32 Wi-Fi Optional Class A++/A+ Technical features Indoor unit code 3381254 Outdoor unit code 3381407 System code (indoor + outdoor unit) 3381413 Energy efficiency cooling energy class A++ heating energy class (hottest season) A+++ heating energy class (medium season) A+ SEER 6.3 SCOP (mid season) 4.0 Performance nominal cooling capacity W 2854 (909-3400) nominal heating capacity W 2930 (821-3370) nominal absorbed power in cooling (min-max) W 732 (100-1240) nominal absorbed power in heating (min-max) W 733 (120-1200) indoor unit sound pressure (min/med/max) dB(A) 21/ 25 / 32 / 38.5 nominal indoor unit air flow m^3/h 466 dehumidification capacity l/h 1.05 Electrical/installation data IP protection class indoor unit / outdoor unit IPX0 / IP24 power supply and number of phases Hz - V - Ph 50-230-1 Fuse max amperage A 20 liquid pipe diameter inches 1/4'' gas pipe diameter inches 3/8'' max connection length m 25m maximum height difference indoor unit - outdoor unit m 10m Dimensions and weight dimensions PU (LxHxW) mm 805x194x285 EU dimensions (LxHxW) mm 720x270x495 Ariston PRIOS Energy class up to A+++ 2D INVERTER Technology* Compatible with Wi-Fi KIT** GOLDEN FIN treatment for better protection from atmospheric agents Memory function BOOSTER function Check for refrigerant leaks SELF-CLEANING function Ariston Climate Compatible with the new Ariston Clima R32 WiFi kit to connect the product to the internet. Thanks to the ARISTON CLIMA app, customers will always be able to manage and control the climate, remotely or from home, with a simple touch. MEMORY This function allows you to set and memorize both the temperature and the fan speed (also the sleep function if activated) to ensure greater comfort the next time you turn it on. 2D INVERTER / 3D INVERTER* Double inverter in the outdoor unit to modulate fan speed and compressor frequency. Thus obtaining greater efficiency, better management of consumption and effective noise control. The 3D INVERTER models have an additional inverter in the indoor unit to control the noise level in the home. FOLLOW ME More accurate temperature control is possible with the Follow Me function. With the remote control, by sending a signal to the air conditioner, it is possible to perfectly adjust the desired temperature in the exact point of the room where the remote control is located. CHARACTERISTICS R32 Conditioner charged with R32 refrigerant gas, not mixed with lower CO2 emissions and with GWP of 675 SELF-CLEANING By reversing the direction of rotation of the outdoor unit fan, it directs the air flow onto the outdoor exchanger, cleaning it from impurities to ensure a long life of the product. It activates each time it is switched off and during the SELF-CLEAN 1W STAND-BY New absorption optimization logic to cut consumption in standby mode by up to 80% GOLDEN FIN Hydrophilic treatment performed on the heat exchange coils which facilitates the drainage of the condensate water, accelerates defrosting by increasing energy efficiency and protects the outdoor unit from acid rain, salty air and corrosive elements. OPTIMIZED PIPE SECTION Compared with traditional piping, the trapezoidal cross section of the new piping allows more refrigerant to pass through, improving energy efficiency. MULTI-SECTION EVAPORATOR Given the compact size of the indoor unit, the multi-section evaporator makes it possible to optimize the heat exchange spaces by increasing thermal efficiency. 2D INVERTER DC Modulation of compressor frequency and external fan speed. FOLLOW ME The operation of the air conditioner depends on the remote control sensor which detects the actual temperature of the room in which it is located. SILENCE FUNCTION This function allows the air conditioner to set an ultra-minimum indoor unit fan speed, making it extremely quiet environment INTERNAL FAN 12 SPEEDS For each of the three settable speeds (HIGH, MED, LOW), the air conditioner has three sub-speed levels. These, added to the speeds of the dehumidification, turbo and silence functions, allow the air conditioner to have a total of 12 air flow speeds. 5-SPEED OUTDOOR FAN The 5-speed DC fan motor of the outdoor unit increases energy efficiency while maximizing silence. VERTICAL SWING Starts automatic flap swing. AIRFLOW COMFORT In cooling mode the air flow is directed upwards while in heating it is conveyed vertically towards the Bass. This allows for homogeneous temperature distribution in the room, increasing comfort ANTI COLD AIR In heating mode the fan speed of the indoor unit is adjusted to ensure that there is no leakage of cold air in the first moments of operation. TURBO FUNCTION It allows to reach the pre-set temperature in the shortest possible time. AUTO FUNCTION The mode and fan speed are set automatically on the basis of the ambient temperature detected. SWITCHING OFF THE DISPLAY Allows you to switch off the display of the indoor unit, increasing comfort especially at night. SLEEP Automatically adjusts the temperature to make the environment more comfortable during the night AROMATHERAPY Porous filter combined with essential oils (not supplied with the product) for the diffusion of fragrances. ANTI-ODOUR FILTER Removes bad odors and volatile organic compounds. WASHABLE DUST FILTER Removes inclusions in the air. R32 UNIVERSAL INDOOR UNIT Mono/multi R32 universal indoor unit, to optimize space in warehouses. LOW AMBIENT COOLING The air conditioner operates in cooling mode with outside temperatures below 15°C. CHECKING FOR REFRIGERANT LEAKS The air conditioner detects any refrigerant leaks and displays an error message on the display of the indoor unit. INVISIBLE DISPLAY The display is placed behind the panel of the indoor unit for a more elegant design. FLAP AUTO MEMORY Before switching off, the climate control system stores the last position of the flap and restores it the next time it is switched on. MEMORY The air conditioner stores the current operating settings, or restores the previous settings, such as the operating mode, temperature setting, fan speed and sleep function (if activated) TIMER Allows you to turn the air conditioner on and/or off at the desired time. SELF CLEAN Automatically cleans and dries the evaporator, bringing it back to optimal conditions for subsequent operation. SELF-DIAGNOSIS The air conditioner micro-computer monitors any malfunctions and blocks the device in the event of malfunctions, indicating the error code on the display of the indoor unit. AUTORESTART After power is restored, in the event of a power blackout, the air conditioner restarts with the last settings set such as operating mode, temperature, fan speed and flap position ANTI-RUST TREATMENT Anti-rust treatment on the metal bodies of the outdoor unit to prevent the formation of rust over time. FLEXIBLE CONDENSATE DRAIN The indoor unit condensate drain pipe can be positioned both on the same side of the refrigerant pipes, and on the opposite side, for a more flexible installation of the air conditioner. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON GAS BOILER model CARES X 24 CF METHANE Low NOx OPEN CHAMBER - NEW Product code: 3301313 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency B XL withdrawal profile Technical specifications Internal, installation in branched collective pipe with natural draft Nominal heat input max/min (heating) PCI kW 25.8-11.0 Nominal heat input max/min (sanitary) PCI kW 27-11 Max/min useful heat output (heating) kW 23.2-9.8 Efficiency at nominal heat input PCI: 90.1% Efficiency at 30% of nominal flow rate PCI: 89.9% Max/min heating temperature: 82-35°C DHW max/min temperature: 60-36°C Port. specific in healthcare (10 min. with ΔT=30°C): 11.8 litres/min Quantity of hot water (ΔT=25°C): 14.2 l/min Quantity of hot water (ΔT=35°C): 10.1 l/min Minimum ambient temperature of use: 5°C Supply voltage/frequency V/Hz 230-50 Degree of protection of the electrical system IP X4D Dimensions: mm (HxWxD) 745 x 400 x 315 Power supply: methane or LPG Characteristics Digital multifunction display Continuous modulation high efficiency circulator Predisposition for on-off thermoregulation Predisposition solar systems natural circulation Self-diagnosis system by code Mono-temperature zone management Copper finned primary exchanger Double exchanger technology Integrated minimum pressure switch Cold water inlet and heating return filters Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE STANDARD TRANSFORMATION KIT WILL BE SUPPLIED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ariston CARES S 24 EU condensing boiler complete with methane or low NOx LPG fume exhaust kit 3301637 - NEW Heating energy class A Sanitary energy class A XL load profile Nominal heat input max min heating 20.0/4.7 kW Nominal max min DHW heat input 23.5/4.7 kW Heating temperature max min 82 / 35 °C Quantity of hot water deltaT=25°C 13.2 litres/min Power frequency voltage 230/50 V/Hz Electrical protection degree X5D IP NOx class 6 CARES S The condensing boiler suitable for every need, able to combine great performance and high robustness. Thanks to the stainless steel condensing exchanger, CARES S represents the right balance between comfort and performance. Reduction of energy consumption up to 35% Stainless steel condensing exchanger More robust design thanks to the new metal front panel Better accessibility thanks to the front hydrometer MADE IN ITALY produced entirely in Italy SMALL SIZE small footprint for easy installation SYSTEM MANAGEMENT new communication protocol set up to guarantee complete management of the system. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Open Chamber Water Heater Ariston FAST RX 11 lt low NOx Methane cod. 3632412 new model CNG product code: 3632412 Energy label specifications according to the European ErP directive Energy efficiency: Class A Load profile: M profile Characteristics of heating/DHW operation: Gas category II2H3+ Type B11bs Open chamber with natural draft DC 3.0V battery power supply Nominal heat input: 21.5 kW Minimum thermal input: 9.5 kW Maximum nominal pressure: 10 bar Minimum operating pressure: 0.15 bar Minimum operating flow: 2.5 l/min Nominal flow rate (ΔT 25°C): 11 l/min Smoke temperature at maximum flow rate: 176°C Nox emissions: 46.5 mg/kWh CO2 emissions - Methane: 6.5% - LPG: 8.2% Minimum ambient temperature of use: 5°C Sound power: 60dB(A) Dimensions (HxWxD): 617 x 310 x 210 mm ; 10.2kg Power supply: CNG or LPG Warranty: 2 years FAST RX Instant, fast, efficient, easy gas water heaters Ariston has just launched its new range of FAST RX instantaneous gas water heaters, with this new range the user will select the ideal temperature with considerable gas and water savings, as it is not necessary to mix it with cold water. Furthermore, FAST RX is easy to use and consumes gas only when it is running. The whole range complies with the ErP 2018 regulation , which requires a lowering of NOx emissions. In addition to great efficiency, the X range stands out for its simplicity of installation, compact dimensions and comfort. Ensuring maximum peace of mind and sanitary comfort is one of Ariston's main objectives, and FAST R represents the ideal solution for any domestic hot water requirement. With the modulation of the electronic thermostat, a great stability of the hot water temperature will be obtained. FAST R heaters work with a minimum water pressure of 0.15 bar, this is achieved by modulating the burner. Counting with smoke sensors, water and flame detectors for maximum safety of use. Characteristics: Low NOx: ErP compliant 09/26/2018 Completely safe High quality components Easy to use Operation even with minimum water flow rates up to 2 l/min Presence of water flow switch for accurate temperature control Internal installation Guaranteed Italian quality EXTERNAL TEMPERATURE REGULATION It allows the user to choose the temperature that best suits his needs. INSTALLATION SIMPLICITY Product easily installed with few elements to connect SIMPLICITY OF MAINTENANCE Single-volume product with easy access to internal components for quick and easy maintenance. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Power kW 16 Power supply: LPG NOx emissions 47 mg/kWh Nominal thermal power 31 kW Minimum thermal power 8.5 kW Modulation range 1:3 Nominal heat input 26 kW Minimum heat input 7.4 kW Maximum nominal pressure 10 bar Minimum operating pressure 0.1 bar Minimum operating flow 3.2 l/min Flow rate with temperature difference (Δt) 25 °C 16 l/min Supply voltage (Freq. 50 HZ) 230 V Maximum absorbed power 44 W Sound power 63 dB(A) Protection type IPX4 Weight 13kg Energy class A M pick profile NEXT EVO X It is the new instantaneous Low NOx sealed chamber gas water heater, characterized by an exclusive design, small dimensions and a new intuitive LCD display which makes it easier to adjust the water temperature. Low NOx: ErP compliant 09/26/2018 Ultra compact: only 16.5 cm deep Temperature control via NTC probes at the inlet and outlet of the exchanger Flame ionization electronic ignition with gas savings of up to 25% compared to older generations Operation with water pressure 0.2 bar Operation even with minimum water flow rates up to 2.5 l/min Can be integrated with solar thermal systems IPX4D electrical protection Internal installation * 100% GUARANTEED BY ARISTON Every single component is developed with the aim of guaranteeing long-lasting performance and high efficiency, with the guarantee of the Ariston brand. * 100% CHECKED AND TESTED Every single Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, with superior results guaranteed by our commitment. * 100% BUILT TO LAST Strong and super resistant materials, components and products developed to work in extreme conditions to deliver high-level results with maximum durability High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions. Solar integration Prepared for integration with a solar thermal system. Electronic temperature control Electronic control panel for easier and more immediate use. Led Display Multi-function LCD display, simple and intuitive. Ultra-thin Extremely small footprint that allows for concealed installation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Scaldabagno Elettrico ad accumulo Ariston VELIS PRO 50 litri 3100914 Caratteristiche Tecniche Codice prodotto: 3100914 Specifiche etichetta energetica secondo direttiva Europea ErP Efficienza energetica: Classe B Profilo di prelievo: profilo M Caratteristiche esercizio riscaldamento/sanitario: Capacità: 50 litri Installazione: Multiposizione V/H Potenza: 1500 W Voltaggio: 230 V Tempo di riscaldamento (ΔT=45°C): 1,30 Tempo necessario per la prima doccia: 50 min Pressione max di esercizio: 8 bar Temp. max di esercizio °C 80 Dimensione LxHxP mm 506 x 776 x 275 mm ; 22 kg Protezione: IPX4 VELIS PRO Lo scaldacqua elettrico super sottile semplice e flessibile da installare che grantisce la prima doccia in metà del tempo. Caratteristiche: Struttura a doppio serbatoio Design Premium Display LCD Prima doccia disponibile in tempi rapidissimi Autoprogrammazione ECO EVO Shower ready LED Funzione antilegionella Smaltatura al titanio Doppio anodo di magnesio Resistenza smaltata antirumore Funzione ANTILEGIONELLA Per assicurare massima sicurezza e igiene, i nuovi prodotti Ariston con pacchetto ABS sono dotati della funzione anti-legionella che, nel caso in cui per 30 giorni consecutivi questo non avvenga, fa in modo di riscaldare l’acqua accumulata fino a 65°C. Tecnologia doppio serbatoio Scalda l'acqua in meno tempo ciascun serbatoio è dotato di elemento riscaldante e pertanto può essere utilizzato in maniera indipendente garantendo quantità d acqua ideale sempre pronta all'uso Funzione ECO EVO memorizza le tue abitudini quotidiane fornendoti l'acqua calda solo quando ti serve consentendoti di risparmiare energia e ridurre i costi Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Ariston Nuos Evo 150 WH Heat Pump Water Heater with 150 liter storage tank - NEW Technical features Product code: 3629074 Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Load profile: L profile Characteristics of heating/DHW operation: Monobloc wall mounted water heater COP air 7°C (EN 16147): 3.15 Heating time @ A7°C (EN 16147) h:min: 10:0 Min/max air temperature °C: -5/42 Sound power db(A): 50 Average absorbed electric power W: 250 Nominal accumulation capacity lt: 150 Maximum working pressure bar: 8 Maximum absorbed voltage/power V/W: 220-240/1550 Resistance power W: 1200 IP24 electrical protection New Evo A+ Compact and easy to install, the Nuos Evo A+ heat pump water heater offers great performance and reliability. Ariston's innovation and research have created a water heater capable of using a natural and inexhaustible source of energy: the heat of the air, thus guaranteeing energy efficiency and savings. Nuos Evo is the optimal solution for those with limited space and allows you to save at least 70% of energy compared to a traditional electric boiler. The product is so efficient that it reaches energy class A+, the highest energy class that can be declared starting from September 2017. Working range in heat pump with air temperatures from -5 to 42°C / Ecological gas R134A allows to reach water temperatures up to 62°C in heat pump Condenser wrapped around the boiler (not immersed in water) Low noise (silent function) / Boiler in titanium enamelled steel Supplementary electrical resistance Active anode (protech) + magnesium anode LCD display Functions: green, auto, boost, boost 2, hourly programming of voyage and anti-legionella samples Product for internal installation Green function Function that maximizes energy savings. The water heater works exclusively in heat pump mode, heating domestic water up to 62°C. Boost function Function that reduces the heating times of the water heater to a minimum, increasing sanitary comfort. The machine works simultaneously in heat pump and electrical resistance, speeding up the heating of the water. Once the maximum operating temperature of the heat pump has been exceeded, the electrical resistance continues to heat up to the water set-point temperature. Auto mode Function that allows the best compromise between comfort and savings. The machine optimizes the heat pump and resistance activation logic. Anti-legionella function This function provides for automatic disinfection cycles. On a monthly basis, the machine starts a check and, if necessary, heats the sanitary water up to 65°C, keeping it at this temperature until any bacterial proliferation in the tank is destroyed. Hourly programming of withdrawals This is the function that allows you to program times and water temperatures to your liking. The water heater will reach the chosen temperature at the preferred time (up to two times can be programmed): the process will give priority to heating via the heat pump and, only if necessary, will take place via the electric heaters Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Product code: 3629057 Energy label specifications according to the European ErP directive Energy efficiency: Class A+ Load profile: M profile Characteristics of heating/DHW operation: Monobloc wall mounted water heater COP air 7°C (EN 16147): 2.45 Heating time @ A7°C (EN 16147) h:min: 8:04 Min/max air temperature °C: -5/42 Sound power db(A): 50 Average absorbed electric power W: 250 Maximum quantity of hot water at 40°C: 128 litres Nominal accumulation capacity lt: 110 Maximum working pressure bar: 8 Maximum absorbed voltage/power V/W: 220-240/1550 Resistance power W: 1200 Standard air flow m3 /h: 100-200 Minimum volume of the installation room m3: 20 Empty weight kg: 55 IP24 electrical protection Insulation thickness mm: 41 Diameter of water connections " 1/2 M Minimum storage room temperature °C: 1 Overall dimensions: see the attached image Nuos Evo 80-110 A+ WH  Compact and easy to install, the Nuos Evo A+ heat pump water heater offers great performance and reliability. Ariston's innovation and research have created a water heater capable of using a natural and inexhaustible source of energy: the heat of the air, thus guaranteeing energy efficiency and savings. Nuos Evo is the optimal solution for those with limited space and allows you to save at least 70% of energy compared to a traditional electric boiler. The product is so efficient that it reaches energy class A+, the highest energy class that can be declared starting from September 2017. Working range in heat pump with air temperatures from -5 to 42°C / Ecological gas R134A allows to reach water temperatures up to 62°C in heat pump Condenser wrapped around the boiler (not immersed in water) Low noise (silent function) / Boiler in titanium enamelled steel Supplementary electrical resistance Active anode (protech) + magnesium anode LCD display Functions: green, auto, boost, boost 2, hourly programming of voyage and anti-legionella samples Product for internal installation Green function Function that maximizes energy savings. The water heater works exclusively in heat pump mode, heating domestic water up to 62°C. Boost function Function that reduces the heating times of the water heater to a minimum, increasing sanitary comfort. The machine works simultaneously in heat pump and electrical resistance, speeding up the heating of the water. Once the maximum operating temperature of the heat pump has been exceeded, the electrical resistance continues to heat up to the water set-point temperature. Auto mode Function that allows the best compromise between comfort and savings. The machine optimizes the heat pump and resistance activation logic. Anti-legionella function This function provides for automatic disinfection cycles. On a monthly basis, the machine starts a check and, if necessary, heats the sanitary water up to 65°C, keeping it at this temperature until any bacterial proliferation in the tank is destroyed. Hourly programming of withdrawals This is the function that allows you to program times and water temperatures to your liking. The water heater will reach the chosen temperature at the preferred time (up to two times can be programmed): the process will give priority to heating via the heat pump and, only if necessary, will take place via the electric heaters Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less