MIDEA TRIAL SPLIT INVERTER AIR CONDITIONER AIR CONDITIONER MISSION PRO 9+9+9 series with M3OF-21HFN8-Q R-32 Wi-Fi OPTIONAL 9000+9000+9000 1) Model: Model: 3x Mission Pro MSMBAU-09HRFN8 Power: 9000 btu/h Performance: Cooling Capacity (kW): 2.64 Heating capacity (kW): 2.93 Air Flow (min-med-max) m3/min 4.0-6.2-7.3 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-31-39 Sound power (Hi) dB(A) 55 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm): 730×198×293 ; 7.4kg OUTDOOR UNIT: Catalog number: M3OF-21HFN8-Q Gases : R-32 Minimum-max number of connectable indoor units: 3 Energy efficiency - Cooling down Nominal Capacity kW: 7.91 Absorbed power (Max): W 2460 SEER Seasonal Energy Efficiency: 6.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 425 - Heating Nominal Capacity kW: 8.21 Absorbed power (Max): W 2250 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1960 Performance Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 59 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Characteristics Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 Dimensions Indoor Unit WxDxH (mm): 730×198×293 ; 7.4kg Outdoor Unit (LxDxH) (mm): 845x363x702 ; 53 kgs MIDEA Mission Pro Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. Four inverters The quattro inverter technology consists in the adoption of linear regulation systems of the speed of the internal fan (selectable between 1% and 100%) of regulation of the temperature required in the room in units of 0.5 °C and of linear step-less modulation of outdoor unit compressor and fan. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. GEAR function The MISSION-PRO units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection. Do Not Disturb function By pressing a button on the remote control it is possible to silence all the audible alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Suitable for installations in coastal areas or in particularly humid areas. Under the same environmental conditions, the new coating of the Midea condensers guarantees them a longevity up to over 7 times higher than traditional models. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use. Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely.

Read more less

Technical features Indoor Units 1) Model: Model: 3 x Mission Pro MSMBAU-09HRFN8 Power: 9000 btu/h Performance: Cooling Capacity (kW): 2.64 Heating capacity (kW): 2.93 Air Flow (min-med-max) m3/min 4.0-6.2-7.3 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-31-39 Sound power (Hi) dB(A) 55 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm): 730×198×293 ; 7.4kg 2) Model: Model: Mission Pro MSMBBU-12HRFN8 Power: 12000 btu/h Performance: Cooling Capacity (kW): 3.52 Heating Capacity (kW): 3.81 Air Flow (min-med-max) m3/min 4.0-6.2-8.3 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-32-40 Sound power (Hi) dB(A) 56 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm): 810×200×300 ; 8.5kg Outdoor Unit Model: Catalog number: M4O-36FN8-Q Gases: R-32 Max indoor units that can be combined: 4 Power (V/Hz/Φ) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 10.55 Absorbed power (Max): W 3520 SEER Seasonal Energy Efficiency: 7.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 565 Heating Nominal Capacity kW: 10.55 Absorbed power (Max): W 2880 SCOP Seasonal energy efficiency (W/W): 3.8 Energy Efficiency Class: A Annual energy consumption KWh/A: 3426 Performance: Outdoor Unit Air Flow: m3/h 4000 External Unit Sound Pressure Max (dB(A)): 63 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxWxH) (mm):946x410x810 ; 68.8 Kg Max. Total length/each UI m 45/25 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit. Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability. High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. General characteristics MIDEA Mission Pro Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. Four inverters The quattro inverter technology consists in the adoption of linear regulation systems of the speed of the internal fan (selectable between 1% and 100%) of regulation of the temperature required in the room in units of 0.5 °C and step-less linear modulation of outdoor unit compressor and fan. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. GEAR function The MISSION-PRO units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection. Do Not Disturb function By pressing a button on the remote control it is possible to silence all the audible alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Suitable for installations in coastal areas or in particularly humid areas. Under the same environmental conditions, the new coating of the Midea condensers guarantees them a longevity up to over 7 times higher than traditional models. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use. Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Indoor unit code: KIDP-27 IU Outdoor unit code: KID-27 OU P = Pink color Technology: 3D DC INVERTER Energy efficiency: Cooling efficiency SEER: 7.1 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Annual energy consumption in cooling/heating: 128/910 kWh/a Performance: Cooling capacity: 2.64 kW Power absorbed in cooling: 830 W Heating capacity: 2.93 kW Power absorbed in heating: 850 W Indoor unit Sound Pressure (Min / Med / Max) (db(A)): 24/33/39 Internal unit sound power max db(A); 52 Max Outdoor Unit Sound Pressure (db(A)): 60 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35/9.52(1/4"/3/8") Operating Limit Temperature: -15 Dimensions and weight: Indoor Unit (LxWxH): 900x190x310 mm ; 10kg Outdoor Unit (LxWxH): 728x300x555 mm; 26kg MIDEA KIDS STAR Midea presents Kid Star with the Anti-Kick-Quilt function which, should the child uncover himself during the night, intervenes by automatically regulating the temperature, ventilation speed and angle of the air flow K ID STAR is the MIDEA solution dedicated to the little ones: both the splits (which can be purchased in SKY BLUE and SWEET PINK) and the relative remote controls (which resemble the shape of a teddy bear) in fact combine the aesthetic tastes of the little ones with the air conditioning needs , dehumidification and purification of their bedrooms. ANTI-KICK-QUILT function But if KID STAR may look like a toy from the outside, inside it is an infusion of technologies: among all, the presence of a thermal sensor with ANTI-KICK-QUILT function stands out which, should the child discover himself during the night, it intervenes by automatically regulating the temperature, decreasing the fan speed, and adjusting the angle of the air flow to avoid the risk of excessive cooling. Super Quiet The sound pressure emitted by the KID STAR indoor units reaches a value of 24 Db(a), while guaranteeing excellent air flow rates. TOY remote control The KID STAR units are equipped with a nice colored remote control which takes the shape of a teddy bear and which, if bumped, automatically returns to the vertical position. KID STAR is available in 2.7 and 3.5 kW, with energy efficiency classes A++/A+ Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model: Indoor unit code: MA-24NXD0-I EAN: 8033638102275 Outdoor unit code: MA24N8D0-O EAN: 8033638102282 White color Technology: INVERTER Cooling performance Capacity KW (Min-Nom_Max): 2.65-7.03-8.25 Absorbed Electric Power W (Min-Nom_Max): 946-2434-2068 Energy Efficiency Class: A++ Annual energy consumption: 276 KWh/A Performance in Heating: Capacity KW (Min-Nom_Max): 1.04.5.57-5.89 Absorbed Electric Power W (Min-Nom_Max): 254-1538-3507 Scop (Medium-Warm Season): 4.0-4.8 Energy Efficiency Class (Medium-Hot Season): A++ Annual energy consumption (Medium-Hot Season): 402 KWh/A Temperature Operating limit: -15 °C Characteristics: Sound Pressure IU (Silent-Min-Med-Max) dB(A): 22-33-40-47 Max Sound Power UI dB(A): 56 EU Sound Pressure (Max) dB(A): 60 EU Max Sound Power dB(A): 68 IU Air Flow (Min-Med-Max) m3/min: 11.7-14.3-17.5 UE air flow m3/min: 50 Liquid / Gas Pipes Diameter (inch): 9.52 / 15.88mm Dimensions and weight: Internal Unit Dimensions (LxWxH) mm: 1038x235x325; 12.8kg External Unit Dimensions (LxWxH) mm: 845x363x702; 51.2 kgs MIDEA SMART R-32 Series features: Self-diagnosis: In the event of a breakdown, a fault code system allows users to be notified of defects in a simple and clear manner in order to quickly activate the assistance service. 1 W Stand By : In the event of a prolonged stop, the indoor units completely remove the power supply to the outdoor unit, decreasing the electricity consumption in the Stand-By phase. Remote control The unit is equipped with an infrared remote control Condensation control : Smart units can operate in cooling mode even at low external temperatures to air-condition technical rooms. Hydrophillic Aluminum: The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to corrosion and atmospheric agents. Eco function: This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product when used in cooling mode. Refrigerant leak alarm: If the temperatures of the refrigerant circuit are irregular due to refrigerant leaks, a specific fault code (EC) allows to identify this condition. GEAR function: The Smart units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Follow Me function : The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function : In the event of failure of one of the product's sensors, operation can continue in emergency mode, until the faulty part is replaced. Deflector orientation memory: At each restart, the vertical air deflector is automatically positioned in the last used angle "Do Not Disturb" mode By pressing a button on the remote control it is possible to silence all acoustic warnings, turn off the display of the internal unit and reduce the velocity of the internal fan to a rotation speed lower than the minimum, normally selectable. "Diamond" Outdoor Unit The external units feature a unique diamond cut shape with no visible screws on the face of the unit. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OFFER VALID UNTIL STOCKS LAST Technical features Indoor unit catalog number : MSMA2BU-12HRDN8 Outdoor unit catalog code : MOX133-12HFN8 Power : 12000 Btu Optional Wi-Fi CE-SK105 Energy efficiency SEER : 6.1 SCOP : 4 Energy efficiency class in cooling: A++ Energy efficiency class in heating: A+ Annual energy consumption in cooling : 211 kWh/a Annual energy consumption in heating : 686 kWh/a Performance Cooling capacity : 3.52 kW Heating capacity : 3.81 kW Cooling power consumption: 1213W Heating absorption: 1100 W Air flow : 10 m 3 /min Indoor unit sound power level : 56 dB(A) External unit sound power level : 63 dB(A) Indoor unit sound pressure level : 21~37 dB(A) Outdoor unit sound pressure level : 56 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -15° ~ 50°C - Heating: -15° ~ 30°C Installation data Liquid piping diameter : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Maximum piping length: 25 m Maximum difference in height indoor unit / outdoor unit: 10 m Dimensions and weight Indoor unit dimensions (LxWxH): 835x208x295 mm Indoor unit weight: 8.7 Kg External unit dimensions (WxHxD): 770x550x270 mm Outdoor unit weight: 22.7 Kg Midea Elegance The evolution of technology. With the Midea Elegance Series air conditioner you can keep control of your domestic consumption thanks to the iECO and GearShift functions, discover true comfort by setting the air conditioner in Follow Me, Breeze Away and Super Cool modes and enjoy your home in safety thanks to the sterilization function for deep cleaning and quick disinfection. Furthermore, thanks to a special anti-corrosion treatment, the heat exchanger of the external unit will be resistant to salt air and external atmospheric pollutants. Speed ​​linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values ​​1-100%. Gear function The GEAR function allows you to adjust the maximum rotation speed of the compressor, limiting its capacity to 75% and 50% of the nominal value, improving efficiency. Follow me The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a precise reading even when changing rooms. Control your climate with your voice The Right series air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Midea Smart Kit (Optional) The indoor units of the Elegance series can be equipped with the CE-SK105 accessory to be managed by a dedicated APP via WLAN connection Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OFFER! Midea Inverter Air Conditioner RIGHT + EVOLUTION series 12000 Btu MSMABU-12HRDN8 + MOX102-12HFN8 Class A++/A+ Wi-Fi Optional Technical features Indoor unit catalog number : MSMABU-12HRDN8 Outdoor unit catalog code : MOX102-12HFN8 Power : 12000 Btu Optional Wi-Fi CE-SK 105 Energy efficiency SEER : 7.0 SCOP : 4.2 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -15° ~ 50°C - Heating: -15° ~ 24° C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Maximum piping length: 25 m Maximum height difference Indoor Unit / Outdoor Unit: 10 m Dimensions and weight Internal Unit Dimensions (LxWxH): 805x205x285 mm Indoor Unit Weight: 7.9 Kg External Unit Dimensions (LxWxH): 720x270x495 mm Weight of Outdoor Unit: 23.7 Kg Midea Right + evolution The minimalist design and fluid shapes of the Right indoor unit are suitable for any interior furnishing style, characterized by the relief detail on the sides of the split which recalls a sea wave Self-diagnosis In the event of a failure, a fault code system allows users to report defects in a simple and clear way to quickly activate the assistance service 1W Stand By In the event of a prolonged shutdown, the indoor units completely remove the power supply to the outdoor unit, reducing electricity consumption in the StandBy phase Fan linear regulation The fan of the indoor unit admits linear speed regulation (selectable between 1% and 100%) Midea Smart Kit (Optional) The indoor units of the series can be equipped with the Midea Smart Kit to be managed by a dedicated APP via a WLAN connection Mono-Multi Split multipurpose indoor units Indoor units can be connected with Mono or Multi Split outdoor units Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Indoor unit catalog code : MTB-140 Outdoor unit catalog number : MOU-140K Power : 48000 Btu Energy efficiency Energy Efficiency Class in Cooling : A Heating Energy Efficiency Class: A Performance Cooling Capacity: 14.0 kW Heating Capacity: 16.4 kW Treated Air Indoor Unit : 1940~3010 m 3 /h Sound Power Level Indoor Unit : 37~46 dB(A) External Unit Sound Power Level: 69 dB(A) Electrical data Power supply (V,Hz, Ø) : 230/50/1 Refrigerant gas : R.-410 Operating range - Cooling: -15° ~ 50°C - Heating: -15° ~ 30° C Installation data Pipe diameter Liquid : 9.52 mm (3/8") Gas pipe diameter: 15.88 mm (5/8") Maximum piping length: 65 m Maximum difference in height indoor unit / outdoor unit: 30 m Dimensions and weight Internal Unit Dimensions (LxWxH): 1200x865x300 mm Indoor Unit Weight: 45 Kg External Unit Dimensions (LxWxH): 938x392x1369 mm Weight of Outdoor Unit: 102 Kg Channeled Midea Flexible Air Return Rear air inlet is standard and bottom air inlet is optional. The dimension of the bottom plate and from the back flange are the same, so it is easy for the installer to change the air inlet from the back to the bottom “Fresh Air” intake The "Aria Fresca" intake is standard, it is easy to connect it to the external air passage hole “Twin” combination The internal cassette units can be installed in "Twin" mode: a single external unit can connect with two internal units, expanding the scenario of possible installations. Available in combinations: 18k+18k, 24k+24k, 30k+30k Integrated Drain Pump The drain pump is able to lift the condensed water up to 750mm Features and Functions Automatic restart All Midea products are equipped with a special memory: in the event of a power cut (blackout), once the power returns, the devices set themselves to the last settings Sleep The "Sleep" function allows the air conditioner to gradually increase (in cooling) and decrease (in heating) the temperature, to then switch off after 5 hours. Ideal for the night Timer A daily timer inserted in the remote control allows Midea air conditioners to turn on and off automatically with an accuracy of 30min/1h over 24 hours 5 External Ventilation Speeds Thanks to the Inverter technology, the speed steps of the external ventilation motor go from 2 to 5. A more precise control of the ventilation speed brings enormous advantages in terms of energy absorption Technical rooms air conditioning A special technology allows all Midea Splits to be able to operate in "cooling" mode even with external temperatures down to -15°. Ideal for designing Server Rooms and/or technical rooms Follow Me Midea remote controls are equipped with a temperature sensor, which the unit considers as "ambient temperature". The air conditioner therefore works by "following" the real temperature perceived by the user Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor Unit Catalog No. : MSMABU-09HRDN8, EAN: 8052705160956 Outdoor Unit Catalog No. : MOX133-09HFN8, EAN: 8052705160963 Power : 9000 Btu Optional Wi-Fi CE-SK 103 Energy efficiency SEER : 6.6 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual Energy Consumption in Cooling : 156 kWh/a Annual Energy Consumption in Heating: 714 kWh/a Performance Cooling Capacity: 2.64 kW Heating Capacity: 2.93 kW Cooling absorption: 0.73 kW Heating absorption: 0.73 kW Treated Air Indoor Unit: 7.7 m 3 /min Sound Power Level Indoor Unit : 53 dB(A) External Unit Sound Power Level: 63 dB(A) Sound Pressure Level Indoor Unit : 21~36 dB(A) Sound Pressure Level Outdoor Unit: 56 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -15° ~ 50°C - Heating: -15° ~ 30° C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Maximum piping length: 25 m Maximum height difference Indoor Unit / Outdoor Unit: 10 m Dimensions and weight Internal Unit Dimensions (LxWxH): 805x205x285 mm Indoor Unit Weight: 7.9 Kg External Unit Dimensions (LxWxH): 770x270x550 mm Weight of Outdoor Unit: 22.7 Kg Midea Right The design of the Right range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Control your climate with your voice The Right series air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Remote Control (Smart Kit) The indoor units can be equipped with Midea Smart Kit (optional) in order to be controlled remotely via the Midea AIR app wherever you are supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Mono and Multi Indoor Units The indoor units are multipurpose so that they can be connected in both Mono and Multi configurations. You can therefore decide to install a Mono and add more units in the future. Speed ​​linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values ​​1-100%. Sophisticated design The design of the Right range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Indoor Units Model: Model: 4 x Mission Pro MSMBAU-09HRFN8 Power: 9000 btu/h Performance: Cooling Capacity (kW): 2.64 Heating capacity (kW): 2.93 Air Flow (min-med-max) m3/min 4.0-6.2-7.3 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-31-39 Sound power (Hi) dB(A) 55 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm): 730×198×293 ; 7.4kg Outdoor Unit Model: Catalog number: M4O-36FN8-Q Gases: R-32 Max indoor units that can be combined: 4 Power (V/Hz/Φ) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 10.55 Absorbed power (Max): W 3520 SEER Seasonal Energy Efficiency: 7.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 565 Heating Nominal Capacity kW: 10.55 Absorbed power (Max): W 2880 SCOP Seasonal energy efficiency (W/W): 3.8 Energy Efficiency Class: A Annual energy consumption KWh/A: 3426 Performance: Outdoor Unit Air Flow: m3/h 4000 External Unit Sound Pressure Max (dB(A)): 63 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxWxH) (mm):946x410x810 ; 68.8 Kg Max. Total length/each UI m 45/25 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit. Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability. High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. General characteristics MIDEA Mission Pro Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. Four inverters The quattro inverter technology consists in the adoption of linear regulation systems of the speed of the internal fan (selectable between 1% and 100%) of regulation of the temperature required in the room in units of 0.5 °C and step-less linear modulation of outdoor unit compressor and fan. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. GEAR function The MISSION-PRO units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection. Do Not Disturb function By pressing a button on the remote control it is possible to silence all the audible alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Suitable for installations in coastal areas or in particularly humid areas. Under the same environmental conditions, the new coating of the Midea condensers guarantees them a longevity up to over 7 times higher than traditional models. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use. Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Midea Wall Mounted Indoor Unit EVOLUTION series 12000 Btu MSAGXBU-12HRDN8 R-32 Wi-Fi Optional Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor unit catalog number : MSMA2DU-24HRFN8 Outdoor unit catalog code : MOCA02-24HFN8 Power : 24000 Btu Energy efficiency SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual Energy Consumption in Cooling : 402 kWh/a Annual Energy Consumption in Heating: 1645 kWh/a Performance Cooling Capacity: 7.03 kW Heating Capacity: 7.33 kW Cooling Absorption : 2434 W Heating absorption: 2464 W Air Flow : 17,5 m 3 /min Sound Power Level Indoor Unit : 56 dB(A) External Unit Sound Power Level: 68 dB(A) Sound Pressure Level Indoor Unit: 22-33-40-47 dB(A) Sound Pressure Level Outdoor Unit : 60 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -15° ~ 50°C - Heating: -15° ~ 30°C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 15.88 mm (5/8") Maximum piping length: 50 m Maximum height difference Indoor Unit / Outdoor Unit: 25 m Maximum absorbed current: 17.5 A Dimensions and weight Internal Unit Dimensions (WxHxD): 1038x325x235 mm Indoor Unit Weight: 12.8 Kg Internal Unit Dimensions (WxHxD): 845x702x363 mm Weight of Outdoor Unit: 51.2 Kg Midea First Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Speed ​​linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values ​​1-100%. Gear function The GEAR function allows you to adjust the maximum rotation speed of the compressor, limiting its capacity to 75% and 50% of the nominal value, improving efficiency. supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Follow me The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a precise reading even when changing rooms. Sophisticated design The design of the First range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF ABSENCE OF THE PRODUCT THE NEXT BREEZELESS+ MODEL WILL BE SHIPPED Technical features Indoor Units 1) Model: Model: 3 x MSMTAU-09HRFN8 Power: 9000 btu/h Performance: Cooling Capacity (kW): 2.64 Heating capacity (kW): 2.93 Air Flow (min-med-max) m3/min 4.0-6.2-8.3 Sound pressure (Silent-Min-Med-Max) dB(A) 18-24-30-39.5 Sound power (Hi) dB(A) 54 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm): 886x188x315 ; 10.3kg 2) Model: Model: MSMTAU-12HRFN8 Power: 12000 btu/h Performance: Cooling Capacity (kW): 3.52 Heating Capacity (kW): 3.81 Air Flow (min-med-max) m3/min 6.3-8.0-10.0 Sound pressure (Silent-Min-Med-Max) dB(A) 19.5-26-32-40.5 Sound power (Hi) dB(A) 54 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm):886x188x315 ; 10.3kg Outdoor Unit Model: Catalog number: M4O-36FN8-Q Gases: R-32 Max indoor units that can be combined: 4 Power (V/Hz/Φ) : 220~240/50/1 Capacity: - Cooling down Nominal Capacity kW: 10.55 Absorbed power (Max): W 3520 SEER Seasonal Energy Efficiency: 7.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 565 - Heating Nominal Capacity kW: 10.55 Absorbed power (Max): W 2880 SCOP Seasonal energy efficiency (W/W): 3.8 Energy Efficiency Class: A Annual energy consumption KWh/A: 3426 Performance: Outdoor Unit Air Flow: m3/h 4000 External Unit Sound Pressure Max (dB(A)): 63 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxWxH) (mm):946x410x810 ; 68.8 Kg Max. Total length/each UI m 45/25 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit. Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability. High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. General characteristics MIDEA Ultimate Comfort Ultimate Comfort by Midea represents the extreme evolution of domestic air conditioning systems: thanks to the exclusive Silky Cool technology, in fact, the air flow emitted by the air conditioner is channeled through hundreds of tiny holes, which transform the "classic" jet of air, often the cause of stiff necks and colds, in a delicate and pleasant flow. The result for the user? All the comfort of a Midea air conditioning system without the inconvenience caused by a continuous jet of air on our body. In fact, sheltered from direct air flows, the Ultimate Comfort air conditioning will be particularly comfortable even in those situations in which one stays for a prolonged period of time in the immediate vicinity of the split, during sleep (thanks also to a "record" ” of only 18 dB), or again for those particularly delicate subjects such as children and the elderly. All without affecting the diffusion of cold and/or heat: on the contrary, Ultimate Comfort guarantees air propagated at angles much higher than those allowed by traditional air conditioners. Vertically, the new Midea air conditioner reaches an angle of 110° (against the 80° of the more common products) which rises to 120° (against 90°) horizontally: the air thus arrives more uniformly even in the most remote points of the room , bringing benefits to every corner of the house. The new Ultimate Comfort air conditioner, thanks to the exclusive Inverter Quattro technology , allows an intelligent and modulated use of energy resources, with minimum electricity consumption guaranteed by class A++/A++, while ensuring excellent performance and "top of the range" functions: from possibility of cooling the house despite external temperatures of 60°C, up to the instant cooling function, which thanks to the use of a high-frequency compressor satisfies any immediate cooling needs of the rooms of the house. All obviously controllable remotely via the Midea Air App installed on your smartphone, which allows you to take advantage of additional functions such as the weekly programming of the desired temperatures, as well as to monitor the daily, weekly and monthly consumption of Ultimate Comfort. Equipped with an intelligent sensor, Ultimate Comfort also guarantees control of the humidity level of the environment: in fact, the desired degree of humidity can be set, in a range between 30% and 90%. Equipped with self-cleaning technology, which allows for simplified maintenance, the Ultimate Comfort air conditioner also stands out for its Air Magic filtration system , which in addition to eliminating microbes and other harmful substances, offers all the advantages of ionisation, which intercepts and eliminates bacteria present suspended in the air, in order to make it not only fresh and/or warm, but also healthy, thus helping to contain any allergies to dust, pollen and other inhalable substances. Integrated Wi-Fi control Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use. Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values ​​of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less