Midea Air Conditioner Ceiling/Floor R32 24000 btu MUE-24FNXD0 A++ - NEW Model: Indoor unit code: MUE-24FNXD0 Outdoor unit code: MOU-24FN8-QD0 Power: 24000 btu/h Energy efficiency: Cooling efficiency SEER: 6.1 SCOP coefficient of performance (Medium Season): 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Power Output in cooling: 6.9 kW Power Output in heating: 7.62 kW Power absorbed in cooling: 2220 W Power absorbed in heating: 2120 W Indoor unit sound pressure (Min/Med/Max) (db(A)): 41-46-50 Internal unit sound power max db(A); 62 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 9.52 / 15.88 Dimensions and weight: Indoor Unit (LxWxH): 1068-675-235 mm ; 30 Kgs Outdoor Unit (LxWxH): 845-363-702 mm; 66.8Kg Infrared control included Midea Commercial R-32 The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» This change takes place years before the regulations impose the abolition of traditional refrigerants, testifying to the attention that Midea places on environmental sustainability. Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of installation The range of new Midea indoor units can be connected, in addition to the R32 outdoor units, also to the R410A etsrene units of the previous series, to the full advantage of management simplicity Floor/Ceiling R-32 Easy Cleaning Panel To simplify cleaning operations, all the different parts of the units are easily accessible and/or removable. Turbo function A specific function allows the unit to reach the desired/set temperature in the shortest possible time. Air intake The air inlet is standard on the products: it can be connected to an inlet fan to introduce air into the unit's return duct Wide Range of Air Diffusion The distribution of the air flow is multidirectional, in order to distribute the cold and the heat in the most uniform way, thus guaranteeing maximum comfort. Wired Command Arrangement The control of the units can be carried out, as well as by remote control, also by means of the special wall command (purchasable as an optional) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.117,00
Midea Air Conditioner Ceiling / Floor Inverter R32 18000 btu MUE-18FNXD0 A++ - NEW Model: Indoor unit code: MUE-18FNXD0 Outdoor unit code: MOU-18FN8-QD0 Power; 18000 btu/h Energy efficiency: Cooling efficiency SEER: 6.1 SCOP coefficient of performance (Medium Season): 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Power Output in cooling: 5.3 kW Power Output in heating: 5.57 kW Power absorbed in cooling: 1700 W Power absorbed in heating: 1500 W Indoor unit sound pressure (Min/Med/Max) (db(A)): 37-40-45 Internal unit sound power max db(A); 57 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35(1/4") / 12.7(1/2") Dimensions and weight: Indoor Unit (LxWxH): 1068-675-235 mm ; 26.6 Kgs Outdoor Unit (LxWxH): 800-333-554 mm; 35.6 Kg Infrared control included Midea Commercial R-32 The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» This change takes place years before the regulations impose the abolition of traditional refrigerants, testifying to the attention that Midea places on environmental sustainability. Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of installation The range of new Midea indoor units can be connected, in addition to the R32 outdoor units, also to the R410A etsrene units of the previous series, to the full advantage of management simplicity Floor/Ceiling R-32 Easy Cleaning Panel To simplify cleaning operations, all the different parts of the units are easily accessible and/or removable. Turbo function A specific function allows the unit to reach the desired/set temperature in the shortest possible time. Air intake The air inlet is standard on the products: it can be connected to an inlet fan to introduce air into the unit's return duct Wide Range of Air Diffusion The distribution of the air flow is multidirectional, in order to distribute the cold and the heat in the most uniform way, thus guaranteeing maximum comfort. Wired Command Arrangement The control of the units can be carried out, as well as by remote control, also by means of the special wall command (purchasable as an optional) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.038,00
MIDEA Ducted Air Conditioner Inverter R32 36000 BTU MTI-36FNXD0 A++ three-phase - NEW Model: Indoor unit code: MTI-36FNXD0 Outdoor unit code: MOU-36FN8-QD0 Power; 36000 btu/h Energy efficiency: Cooling efficiency SEER: 6.1 SCOP coefficient of performance (Medium Season): 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Power Output in cooling: 10.4 kW Power Output in heating: 11.14 kW Power absorbed in cooling: 4060 W Power absorbed in heating: 2990 W Internal unit sound pressure (Min/Med/Max) (db(A)): 40-43-47 Internal unit sound power max db(A); 62 Characteristics: Three-phase power supply 380-415V 50Hz Refrigerant Pipes Liquid / Gas Line: mm 9.52 / 15.88 Dimensions and weight: Indoor Unit (LxWxH): 1360-774-249 mm ; 40.5 Kg Outdoor Unit (LxWxH): 946-410-810 mm; 81.5 Kg Midea Commercial R-32 The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» This change takes place years before the regulations impose the abolition of traditional refrigerants, testifying to the attention that Midea places on environmental sustainability. Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of installation The range of new Midea indoor units can be connected, in addition to the R32 outdoor units, also to the R410A etsrene units of the previous series, to the full advantage of management simplicity Ducted R-32 Midea Air Recovery Reversible The air intake duct can be moved from the rear of the product (standard configuration) to the lower part of the same, replacing it with a sheet metal panel. In this way it is possible to make the product suitable for any installation condition. Ducted Units A6 The new range of A6 ductable units is characterized by more compact dimensions than the previous versions (height starting from 210 mm) and by a greater pressure available for the fans, to the full advantage of installation simplicity. The products are also equipped with an innovative function for automatically setting the rotation speed of the fan which allows the system to automatically adapt its work according to the ducts connected to the unit. G2 filters supplied To facilitate installation, Midea ducted units are supplied as standard with a G2 flat filter and filter holder frame. Condensate Lifting Pump The Midea 4-way Cassette indoor units are equipped with a pump for lifting the condensate liquid which allows it to be discharged at a height of 600 mm above the tray. Air intake The air inlet is standard on the products: it can be connected to an inlet fan to introduce air into the return duct Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.969,00
IN CASE OF ABSENCE OF THE PRODUCT THE NEXT BREEZELESS+ MODEL WILL BE SHIPPED MIDEA TRIAL SPLIT INVERTER AIR CONDITIONER AIR CONDITIONER ULTIMATE COMFORT 9+9+9 series with M3OF-21HFN8-Q R-32 Wi-Fi 9000+9000+9000 Indoor Units Model: Model: 3x Ultimate Comfort MSMTAU-09HRFN Power: 9000 btu/h Performance: Cooling Capacity (kW): 2.60 Heating capacity (kW): 2.80 Air Flow (Min-Med-Max) m3/h 4.0-6.2-8.3 Sound pressure (Silent-Min-Med-Max) dB(A) 18-24-30-39.5 Sound power (Hi) dB(A) 54 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Dimensions (LPA) mm 886-188-315 ; 10.3kg Outdoor Unit Model: Catalog number: M3OF-21HFN8-Q Gases: R-32 Max indoor units that can be combined: 3 Power (V/Hz/Φ) : 220~240/50/1 Capacity: - Cooling down Nominal Capacity kW: 6.21 Absorbed power (Max): W 1770 SEER Seasonal energy efficiency: 6.1 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 350 - Heating Nominal Capacity kW: 6.70 Absorbed power (Max): W 1800 SCOP Seasonal energy efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1890 Performance: Outdoor Unit Air Flow: m3/h 3000 External Unit Sound Pressure Max (dB(A)): 58 Sound power (Max) dB(A): 66 Liquid Side Pipe mm 6.35 (X3) Gas Side Pipe mm 9.52 (X3) Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxWxH) (mm): 845-363-702 ; 46.8Kg Max. Total length/ each IU m 60/30 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Ultimate Comfort Ultimate Comfort by Midea represents the extreme evolution of domestic air conditioning systems: thanks to the exclusive Silky Cool technology, in fact, the air flow emitted by the air conditioner is channeled through hundreds of tiny holes, which transform the "classic" jet of air, often the cause of stiff necks and colds, in a delicate and pleasant flow. The result for the user? All the comfort of a Midea air conditioning system without the inconvenience caused by a continuous jet of air on our body. In fact, sheltered from direct air flows, the Ultimate Comfort air conditioning will be particularly comfortable even in those situations in which one stays for a prolonged period of time in the immediate vicinity of the split, during sleep (thanks also to a "record" ” of only 18 dB ), or again for those particularly delicate subjects such as children and the elderly. All without affecting the diffusion of cold and/or heat: on the contrary, Ultimate Comfort guarantees air propagated at angles much higher than those allowed by traditional air conditioners. Vertically, the new Midea air conditioner reaches an angle of 110° (against the 80° of the more common products) which rises to 120° (against 90°) horizontally: the air thus arrives more uniformly even in the most remote points of the room , bringing benefits to every corner of the house. Air flow management An air flow that can be adjusted in maximum freedom, thanks to the possibility of controlling the direction of the air flow via the remote control, both on the vertical and on the horizontal axis. All for maximum comfort at 360°. Inverter Quattro technology The new Ultimate Comfort air conditioner, thanks to the exclusive Inverter Quattro technology , allows an intelligent and modulated use of energy resources, with minimum electricity consumption guaranteed by class A++/A++, while ensuring excellent performance and "top of the range" functions: from possibility of cooling the house despite external temperatures of 60°C, up to the instant cooling function, which thanks to the use of a high-frequency compressor satisfies any immediate cooling needs in the rooms of the house. Air quality Midea air conditioners are designed to guarantee you an enveloping freshness and air quality that is always at the top. Equipped with self-cleaning technology, which allows for simplified maintenance, the Ultimate Comfort air conditioner also stands out for its Air Magic filtration system , which in addition to eliminating microbes and other harmful substances, offers all the advantages of ionisation, which intercepts and eliminates bacteria present suspended in the air, in order to make it not only fresh and/or warm, but also healthy, thus helping to contain any allergies to dust, pollen and other inhalable substances. All obviously controllable remotely via the Midea Air App installed on your smartphone, which allows you to take advantage of additional functions such as the weekly programming of the desired temperatures, as well as to monitor the daily, weekly and monthly consumption of Ultimate Comfort. Equipped with an intelligent sensor, Ultimate Comfort also guarantees control of the humidity level of the environment: in fact, the desired degree of humidity can be set, in a range between 30% and 90% Integrated Wi-Fi control Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use. Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely. Series features: Self-diagnosis In the event of a breakdown, a fault code system allows users to report defects in a simple and clear way in order to quickly activate the assistance service Four inverters The quattro inverter technology consists in the adoption of linear regulation systems of the speed of the internal fan (selectable between 1% and 100%) of regulation of the temperature required in the room in units of 0.5 °C and step-less linear modulation of outdoor unit compressor and fan. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. GEAR function The Ultimate Comfort units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Integrated Midea Smart Kit The indoor units of the Ultimate Comfort series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Do Not Disturb function By pressing a button on the remote control it is possible to silence all the audible alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. Condensation control The Ultimate Comfort units can work in cooling mode even with a low outside temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.538,00
Midea Dual Split Inverter Air Conditioner MISSION PRO 12+18 series with M3OF-27HFN8-Q R-32 Wi-Fi Optional 12000+18000 1) Model Model: Mission Pro MSMBAU-09HRFN8 Power: 9000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 2.60 Heating capacity (kW): 2.80 Air Flow (Min-Med-Max) m3/h 240-380-440 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-31-39 Sound power (Hi) dB(A) 55 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Dimensions (LPA) mm 810-200-300 ; 8.3kg 2) Model: Model: Mission Pro MSMBCU-18HRFN8 Power: 18000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 5.30 Heating Capacity (kW): 5.50 Air Flow (Min-Med-Max) m3/h 500-580-750 Sound pressure (Silent-Min-Med-Max) dB(A) 21-24-33-42 Sound power (Hi) dB(A) 58 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 12.7mm (1/2”) Indoor Unit (LPA) mm 980-225-325 ; 10.7kg Outdoor Unit Model: Catalog number: M3OF-27HFN8-Q Gases: R-32 Max indoor units that can be combined: 3 Power (V/Hz/Φ) : 220~240/50/1 Capacity: - Cooling down Nominal Capacity kW: 7.90 Absorbed power (Max): W 2430 SEER Seasonal energy efficiency: 6.1 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 453 - Heating Nominal Capacity kW: 8.02 Absorbed power (Max): W 2160 SCOP Seasonal energy efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1855 Performance: Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 54 Sound power (Max) dB(A): 67 Liquid Side Pipe mm 6.35 (X3) Gas Side Pipe mm 9.52 (X3) Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxWxH) (mm): 845-363-702 ; 51.1Kg Max. Total length/ each IU m 60/30 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency of 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA MISSION PRO The geometries used for the splits of the MISSION PRO range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Superior Performance Inverter 4 The exclusive QuattroTM Inverter technology allows excellent performance in all conditions of use, making the Midea Inverter compressor one of the best AC compressors in the world. In all conditions, Midea Inverter compressors work powerfully, efficiently, quickly and constantly Maximum efficiency - The step-less linear modulation of the compressor makes it possible to adapt the rotation speed, and therefore the capacity supplied, to the environmental conditions in an extremely precise manner. The compressor perfectly adapts its rotation speed to the needs of the system without waste and with maximum efficiency. Linear regulation - The internal fan speed is user selectable in a linear fashion between 1% and 100% instead of being available in 4 or 5 levels. In this way it is possible to make the product deliver the most congenial air flow to your needs, for maximum comfort. Less Noise - The speed of the external fan adapts to the external temperature conditions and to the working modes of the product, to ensure less noise and maximum efficiency Better Comfort - The temperature that can be set on the products is managed at intervals of 0.5°C. In this way it is possible to find the most correct temperature setting for your well-being. Do Not Disturb function By pressing a button on the remote control it is possible to silence all acoustic alarms, turn off the display of the indoor unit and reduce the speed of the indoor fan to a rotation speed lower than the minimum, normally selectable iECO function This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode GEAR function The Mission PRO units are equipped with the Gear function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. The display of the internal unit is able to show, in addition to the selected temperature, also the room temperature and the instantaneous electrical power absorbed during operation Follow me function Select this function and the special sensor located in the infrared control will detect the ambient temperature around you, and then adjust the operation of the air conditioner according to your needs Other features of the series Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. Integrated Midea Smart Kit The indoor units of the MISSION-PRO series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.125,00
Technical features Indoor Units 1) Model: Model: 3 x Mission Pro MSMBBU-12HRFN8 Power: 12000 btu/h Performance: Cooling Capacity (kW): 3.52 Heating Capacity (kW): 3.81 Air Flow (min-med-max) m3/min 4.0-6.2-8.3 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-32-40 Sound power (Hi) dB(A) 56 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm): 810×200×300 ; 8.5kg Outdoor Unit Model: Catalog number: M3O-27FN8-Q Gases: R-32 Max indoor units that can be combined: 3 Power (V/Hz/Φ) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 7.91 Absorbed power (Max): W 2460 SEER Seasonal Energy Efficiency: 6.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 425 Heating Nominal Capacity kW: 8.21 Absorbed power (Max): W 2250 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1960 Performance: Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 59 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxDxH) (mm): 845x363x702 ; 53 kgs Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit. Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability. High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. General characteristics MIDEA Mission Pro Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. Four inverters The quattro inverter technology consists in the adoption of linear regulation systems of the speed of the internal fan (selectable between 1% and 100%) of regulation of the temperature required in the room in units of 0.5 °C and of linear step-less modulation of outdoor unit compressor and fan. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. GEAR function The MISSION-PRO units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection. Do Not Disturb function By pressing a button on the remote control it is possible to silence all the audible alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Suitable for installations in coastal areas or in particularly humid areas. Under the same environmental conditions, the new coating of the Midea condensers guarantees them a longevity up to over 7 times higher than traditional models. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use. Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.384,00
Technical features Model: Indoor unit code: MSMACU-18HRFN1 Outdoor unit code: MOB02-18HFN1 White color Technology: INVERTER Energy efficiency: Cooling efficiency SEER: 6.17 Coefficient of performance for medium-warm season SCOP: 4.1-5.3 Energy Efficiency Class (cooling): A++ Medium-hot season Energy Efficiency Class (heating): A+/A+++ Annual energy consumption in cooling/heating: 273/1162 KWh/A Performance: Cooling capacity: 5.28 kW Absorbed power in cooling: 1643 W Heating capacity: 5.57 kW Power absorbed in heating: 1633 W Indoor unit sound pressure (Min-Med-Max) (db(A)): 32.5-39-44.5 Internal unit sound power max db(A); 57 Max Outdoor Unit Sound Pressure (db(A)): 57 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35/12.7 Operating Limit Temperature: -15 Dimensions and weight: Indoor Unit (LxWxH): 958x213x302 mm; 8.5kg Outdoor Unit (LxWxH): 800x333x554 mm; 38 kgs General characteristics MIDEA MA2 Series features: Self-diagnosis: In the event of a breakdown, a fault code system allows users to be notified of defects in a simple and clear manner in order to quickly activate the assistance service. 1 W Stand By : In the event of prolonged shutdown, the internal units completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand-By phase. Remote control The unit is equipped with an infrared remote control Condensation control : The MA2 units can operate in cooling mode even at low external temperatures to air-condition technical rooms. Hydrophillic Aluminum: The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to corrosion and atmospheric agents. Eco function: This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product when used in cooling mode. Refrigerant leak alarm: If the temperatures of the refrigerant circuit are irregular due to refrigerant leaks, a specific fault code (EC) allows to identify this condition. GEAR function: The MA2 units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Follow Me function : The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function : In the event of failure of one of the product's sensors, operation can continue in emergency mode, until the faulty part is replaced. Deflector orientation memory: At each restart, the vertical air deflector is automatically positioned in the last used angle. "Do Not Disturb" mode By pressing a button on the remote control it is possible to silence all acoustic warnings, turn off the display of the internal unit and reduce the velocity of the internal fan to a rotation speed lower than the minimum, normally selectable. "Diamond" Outdoor Unit The external units feature a unique diamond cut shape with no visible screws on the face of the unit. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€542,00
Technical features Model: Indoor unit code: MISSION-WF-53 IU Outdoor unit code: MISSION-53 OU White color Technology: 3D DC INVERTER Energy efficiency: Cooling efficiency SEER: 6.8 SCOP coefficient of performance: 4.2/5.4 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+/A+++ Annual energy consumption in cooling/heating: 273/1462 KWh/A Performance: Cooling capacity: 5.28 kW Absorbed power in cooling: 1633 W Heating capacity: 5.58 kW Power absorbed in heating: 1500 W Indoor unit Sound Pressure (Min / Med / Max) (db(A)): 33/37/42 Internal unit sound power max db(A); 55 Max Outdoor Unit Sound Pressure (db(A)): 54 External unit sound power max db(A); 63 Characteristics: Power supply (V/Hz/?) : 230/50/1 Refrigerant gas : R-410 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35/12.7 Operating Limit Temperature: -15 Dimensions and weight: Indoor Unit (LxWxH): 980x225x325 mm; 10.5Kg Outdoor Unit (LxWxH): 800x333x555 mm; 37 kgs General characteristics MIDEA MISSION WF Series features: "Arctic Fox" remote control : The brand new "Arctic Fox" remote control offers maximum ease of use, combined with an ultra-modern design. Thanks to its intuitive logic, although the number of buttons has decreased compared to previous remote controls, its control possibilities have increased. Midea Air: From today you can control your Midea air conditioner with the Midea Air mobile application . The APP, available for both iOS and Android devices, has been designed to offer even more features and greater ease of use. An example? Turn on the air conditioner on your way home so that you can enjoy the desired temperature when you return. iEco Mode: The Mission WF units are equipped with a special iECO mode, which allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. Sleep Curve The use of the Midea App allows an even more accurate control of your air conditioner: starting from the possibility of programming a "Sleep Curve", or rather a series of desired temperatures at any time of the night. You can opt for one of the pre-set options, or create one to your liking. Wi-Fi Control (Optional) By purchasing a special SMART KEY and installing the APP on your iOS or Android mobile device, you can control every function of the air conditioner even remotely. Note: the room where the air conditioner is installed must be covered by a home Wi-Fi network Easy Touch A remote control specifically designed for the Mission range ensures maximum ease and intuitive use. The elegance of the object and the large display go well with the lines of the splits "Do Not Disturb" mode In "Sleep" mode, i.e. the function that guarantees maximum comfort during the night, the Splits in the Mission range have been designed to absorb even less electricity than in the past. Now you can finally sleep peacefully. "Diamond" Outdoor Unit Mission boasts an extremely robust external unit chassis, resistant to atmospheric agents, and characterized by a "diamond" design with a strong aesthetic impact: for the pleasure of the eyes, every single screw has been duly "hidden" to give the product a even more monolithic look. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€590,00
ATTENTION ! Offer valid until stocks last Technical features Indoor Units Model Internal Unit Catalog Code: 2x MA2-09NXD0-I Power : 9000 Btu Cooling Capacity: 2.64 kW Heating Capacity: : 2.93 kW Air flow: 7.7 m 3 /min Sound Power Level : 53 dB(A) Sound pressure level : 21~26~30~36dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x285x205 mm Indoor Unit Weight: 7.9 Kg Outdoor Unit Outdoor Unit Catalog Code: M2OG-14HFN8-Q Connectable Indoor Units : 2 Energy efficiency: SEER : 6.8 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 211 kWh/a Annual energy consumption in Heating : 1295 kWh/a Performance: Cooling Capacity: 4.10 kW Heating Capacity: 6.60 kW Cooling Absorption: 1270 W Heating absorption: 1770 W Sound power level : 64 dB(A) Sound pressure level : 57 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (WxHxD): 800x554x333 mm Weight of Outdoor Unit: 31.6 Kg Midea PRIME Sophisticated design The design of the First range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Speed linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values 1-100%. Gear function The GEAR function allows you to adjust the maximum rotation speed of the compressor by limiting its capacity to 75% and 50% of the nominal value, improving efficiency supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Follow me The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a precise reading even when changing rooms. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€705,00
Technical features Model: Indoor unit code: MA2-18NXD0-I Outdoor unit code: MA-18N8D0-O Energy efficiency: SEER: 6.6 SCOP(medium-warm season) : 4.0-4.69 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating) medium/hot season: A+/A++ Annual cooling/heating energy consumption kWh/A: 276/1200 Performance: Min-nom-max cooling capacity: 1.91-5.28-61.4 kW Min-nom-max absorbed power in cooling: 650-1630-2068 W Heating capacity min-nom-max: 1.04-5.57-5.89 kW Min-nom-max absorbed power in heating: 254-1538-2320 W Air flow (Min-med-Max) m3/min: 9.2-10.8-14.3 Indoor unit sound pressure ( (Silent-Min-Med-Max) (db(A)): 22-30-36-43 Internal unit sound power max db(A); 55 Max outdoor unit sound pressure (db(A)): 57 Max outdoor unit sound power (db(A)): 63 Operating limit temperature: -15°C Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35/12,7 (1/4"-1/2") Type of refrigerant: R32 Dimensions and weight: Indoor Unit (LxWxH): 958x223x302 mm ; 10.3kg Outdoor Unit (LxWxH): 800x333x554 mm; 34kg MIDEA PRIME The geometries used for the splits of the PRIME range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Internal fan rotation speed linear regulation The rotation speed of the internal fan, beyond the usual predefined activity levels, can be adjusted within the values 1-100%: Follow me function Prime series remote controls are equipped with a temperature sensor which the unit considers as "ambient" temperature. In fact, by setting the Follow me function, the appliance is able to "follow the real temperature perceived by the user, guaranteeing maximum comfort. Condensation control The units can work in cooling mode even with a low external temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Refrigerant leak alarm If the temperatures in the refrigerant circuit are irregular due to leaks, a specific fault code (EC) allows you to identify this condition. emergency function In the event of failure of one of the product's sensors, operation can continue in Emergency mode until the faulty part is replaced. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. Super cool function The Super Cool function is a real hallmark of PRIME air conditioners: activated by simply pressing a button, this particular mode maximizes the rotation speed of the internal fan, thus increasing the flow of cold air and allowing the appliance to reduce the temperature to 17°C as quickly as possible Gear function The Prime units are equipped with the GEAR function which offers the user the possibility of independently managing the power supplied by the unit, choosing one of the 3 different levels: 50%, 75% and 100%. In this way you can disregard the classic settings by concentrating solely on the "gear" in which you want the unit to operate: first, second or third. ECO function The Midea Prime series units are equipped with a special iECO mode which allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners "Do Not Disturb" mode By pressing a button on the remote control, Prime can enter DO NOT DISTURB mode, thus silencing all acoustic warnings, turning off the indoor unit display and optimizing the silence of the indoor fan. "Diamond" Outdoor Unit The external units feature a unique diamond cut shape with no visible screws on the face of the unit Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€493,00
Technical features Indoor Units Model: Model: 4 x Mission Pro MSMBAU-09HRFN8 Power: 9000 btu/h Performance: Cooling Capacity (kW): 2.64 Heating capacity (kW): 2.93 Air Flow (min-med-max) m3/min 4.0-6.2-7.3 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-31-39 Sound power (Hi) dB(A) 55 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Indoor Unit WxDxH (mm): 730×198×293 ; 7.4kg Outdoor Unit Model: Catalog number: M4O-28FN8 -Q Gases: R-32 Max indoor units that can be combined: 4 Power (V/Hz/Φ) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 10.55 Absorbed power (Max): W 3520 SEER Seasonal Energy Efficiency: 7.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 565 Heating Nominal Capacity kW: 10.55 Absorbed power (Max): W 2880 SCOP Seasonal energy efficiency (W/W): 3.8 Energy Efficiency Class: A Annual energy consumption KWh/A: 3426 Performance: Outdoor Unit Air Flow: m3/h 4000 External Unit Sound Pressure Max (dB(A)): 63 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxWxH) (mm):946x410x810 ; 68.8 Kg Max. Total length/each UI m 45/25 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit. Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability. High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. General characteristics MIDEA Mission Pro Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. Four inverters The quattro inverter technology consists in the adoption of linear regulation systems of the speed of the internal fan (selectable between 1% and 100%) of regulation of the temperature required in the room in units of 0.5 °C and of linear step-less modulation of outdoor unit compressor and fan. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. GEAR function The MISSION-PRO units are equipped with the GEAR function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection. Do Not Disturb function By pressing a button on the remote control it is possible to silence all the audible alarms, turn off the display of the internal unit and reduce the speed of the internal fan to a rotation speed lower than the minimum, normally selectable. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Suitable for installations in coastal areas or in particularly humid areas. Under the same environmental conditions, the new coating of the Midea condensers guarantees them a longevity up to over 7 times higher than traditional models. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use. Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.539,00
ATTENTION ! Offer valid until stocks last Technical features Indoor Units 1) Model Internal Unit Catalog Code: 1x MA2-09NXD0-I Power : 9000 Btu Cooling Capacity: 2.64 kW Heating Capacity: : 2.93 kW Air flow: 7.7 m 3 /min Sound Power Level : 53 dB(A) Sound pressure level : 21~26~30~36dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x285x205 mm Indoor Unit Weight: 7.9 Kg 2) Model Internal Unit Catalog Code: 1x MA2-12NXD0-I Power : 12000 Btu Cooling Capacity: 3.52 kW Heating Capacity: : 3.81 kW Air flow: 8.3 m 3 /min Sound Power Level : 53 dB(A) Sound pressure level : 22~28~34~38dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x285x205 mm Indoor Unit Weight: 7.9 Kg Outdoor Unit Outdoor Unit Catalog Code: M2OG-14HFN8-Q Connectable Indoor Units : 2 Energy efficiency: SEER : 6.8 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 211 kWh/a Annual energy consumption in Heating : 1295 kWh/a Performance: Cooling Capacity: 4.10 kW Heating Capacity: 6.60 kW Cooling Absorption: 1270 W Heating absorption: 1770 W Sound power level : 64 dB(A) Sound pressure level : 57 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (WxHxD): 800x554x333 mm Weight of Outdoor Unit: 31.6 Kg Midea PRIME Sophisticated design The design of the First range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Speed linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values 1-100%. Gear function The GEAR function allows you to adjust the maximum rotation speed of the compressor by limiting its capacity to 75% and 50% of the nominal value, improving efficiency supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Follow me The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a precise reading even when changing rooms. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€648,00
You have seen 336 out of 374 products
