OFFER VALID UNTIL STOCKS LAST Technical features Indoor unit catalog number : MSMA2BU-12HRDN8 Outdoor unit catalog code : MOX133-12HFN8 Power : 12000 Btu Optional Wi-Fi CE-SK105 Energy efficiency SEER : 6.1 SCOP : 4 Energy efficiency class in cooling: A++ Energy efficiency class in heating: A+ Annual energy consumption in cooling : 211 kWh/a Annual energy consumption in heating : 686 kWh/a Performance Cooling capacity : 3.52 kW Heating capacity : 3.81 kW Cooling power consumption: 1213W Heating absorption: 1100 W Air flow : 10 m 3 /min Indoor unit sound power level : 56 dB(A) External unit sound power level : 63 dB(A) Indoor unit sound pressure level : 21~37 dB(A) Outdoor unit sound pressure level : 56 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -15° ~ 50°C - Heating: -15° ~ 30°C Installation data Liquid piping diameter : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Maximum piping length: 25 m Maximum difference in height indoor unit / outdoor unit: 10 m Dimensions and weight Indoor unit dimensions (LxWxH): 835x208x295 mm Indoor unit weight: 8.7 Kg External unit dimensions (WxHxD): 770x550x270 mm Outdoor unit weight: 22.7 Kg Midea Elegance The evolution of technology. With the Midea Elegance Series air conditioner you can keep control of your domestic consumption thanks to the iECO and GearShift functions, discover true comfort by setting the air conditioner in Follow Me, Breeze Away and Super Cool modes and enjoy your home in safety thanks to the sterilization function for deep cleaning and quick disinfection. Furthermore, thanks to a special anti-corrosion treatment, the heat exchanger of the external unit will be resistant to salt air and external atmospheric pollutants. Speed linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values 1-100%. Gear function The GEAR function allows you to adjust the maximum rotation speed of the compressor, limiting its capacity to 75% and 50% of the nominal value, improving efficiency. Follow me The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a precise reading even when changing rooms. Control your climate with your voice The Right series air conditioner is compatible with Amazon Echo, Google Home, Apple HomeKit. Controlling comfort in your own home has never been easier. Thanks to the integration with the latest generation technologies Echo Voice Command by Amazon Alexa, Google Home and Apple HomeKit you can "ask" your air conditioner to do the best for you, with Midea. Midea Smart Kit (Optional) The indoor units of the Elegance series can be equipped with the CE-SK105 accessory to be managed by a dedicated APP via WLAN connection Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€264,00
OFFER! Midea Inverter Air Conditioner RIGHT + EVOLUTION series 12000 Btu MSMABU-12HRDN8 + MOX102-12HFN8 Class A++/A+ Wi-Fi Optional Technical features Indoor unit catalog number : MSMABU-12HRDN8 Outdoor unit catalog code : MOX102-12HFN8 Power : 12000 Btu Optional Wi-Fi CE-SK 105 Energy efficiency SEER : 7.0 SCOP : 4.2 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -15° ~ 50°C - Heating: -15° ~ 24° C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Maximum piping length: 25 m Maximum height difference Indoor Unit / Outdoor Unit: 10 m Dimensions and weight Internal Unit Dimensions (LxWxH): 805x205x285 mm Indoor Unit Weight: 7.9 Kg External Unit Dimensions (LxWxH): 720x270x495 mm Weight of Outdoor Unit: 23.7 Kg Midea Right + evolution The minimalist design and fluid shapes of the Right indoor unit are suitable for any interior furnishing style, characterized by the relief detail on the sides of the split which recalls a sea wave Self-diagnosis In the event of a failure, a fault code system allows users to report defects in a simple and clear way to quickly activate the assistance service 1W Stand By In the event of a prolonged shutdown, the indoor units completely remove the power supply to the outdoor unit, reducing electricity consumption in the StandBy phase Fan linear regulation The fan of the indoor unit admits linear speed regulation (selectable between 1% and 100%) Midea Smart Kit (Optional) The indoor units of the series can be equipped with the Midea Smart Kit to be managed by a dedicated APP via a WLAN connection Mono-Multi Split multipurpose indoor units Indoor units can be connected with Mono or Multi Split outdoor units Follow me function The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a more precise detection Emergency function In the event of a fault in one of the product's sensors, operation can continue in Emergency mode, until the faulty part is replaced Flap orientation memory At each restart, the vertical air deflector automatically adjusts to the last used angle Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€274,00
Midea Wall Mounted Indoor Unit EVOLUTION series 12000 Btu MSAGXBU-12HRDN8 R-32 Wi-Fi Optional Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€120,00
Midea Inverter Air Conditioner 4 Way Cassette 12000 btu MCA3U-12HRFNX 57x57 A++ Wi-Fi Optional Model: Indoor unit code: MCA3U-12HRFNX(GA) Outdoor unit code: MOX230-12HFN8-Q(GA) Panel Code: T-MBQ-03C3 Power; 12000 btu/h Energy efficiency: Cooling efficiency SEER: 6.6 SCOP coefficient of performance (Medium Season): 4.1-5.1 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating) medium/hot season: A+/A+++ Performance: Capacity in cooling min nom max: 0.85-3.52-4.11 kW Heating capacity min nom max: 0.47-3.81-4.31 kW Power absorbed in cooling: 168-1010-1434 W Absorbed power in heating: 124-1019-1376 W Indoor unit sound pressure (Min/Med/Max) (db(A)): 25-33-36-41 Internal unit sound power max db(A); 62 External unit sound power (Max) dB(A) 62 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35(1/4") / 9.52(3/8") Dimensions and weight: Indoor Unit (LxWxH): 570-570-260 mm Panel (LxWxH) 647-647-50 mm Outdoor Unit (LxWxH): 765-303-555 mm Infrared control included 4-WAY CASSETTE 57x57 Display with IR receiver The indoor unit is equipped with LED display with built-in IR receiver Condensate Drain Pump The units are equipped with a condensate drain pump to facilitate the evacuation of the liquid and facilitate installation. Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. Contact Alarm The indoor units are equipped with a logic output which allows the product failure condition to be exported for connection to remote malfunction indication systems. Air delivery ducting The units are equipped with pre-sheared sections to channel the air delivery. Fan linear regulation The speed of the internal fan can be selected between 1% and 100%, as well as on 5 predetermined levels. Fan synchronous contact The indoor units are equipped with a logic output which allows the fan working condition to be exported and synchronized with external devices. Fresh air intake The unit has vents in its frame to supply fresh air or fresh air. There are terminals on the indoor units for direct control of an supply fan Eco and Gear functions Through the remote control it is possible to set the Eco and Gear programs which allow to adapt the cooling capacity to limit it according to environmental parameters or predefined values. Follow me function The room temperature can be detected by a special sensor located in the local control, in order to obtain a more precise reading ON-OFF input The internal units are equipped with a logic input which allows the product to be switched on and off from an external device. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€933,00
Midea Console Inverter Air Conditioner 12000 btu MFAU-12FNXD0 A++ Internal Unit Code MFAU-12FNXD0* EAN 8033638102480 Code Outdoor Unit MOU-12FN1-QD0* Power supply Indoor Unit PV-Hz Mono 220-240V 50Hz Power supply External Unit PV-Hz Mono 220-240V 50Hz Capacity kW (Min-Nom-Max) 0.62-3.52-440 Absorbed Electric Power W (Min-Nom-Max) 211-1030-1690 SEER 6.1 A++ Annual Energy Consumption kWh/A 201 Heating Capacity kW (Min-Nom-Max) 0.62-3.81-4.95 Absorbed Electric Power W (Min-Nom-Max) 2190-1000-1760 Current A (Nom) 4.7 Theoretical Load (PdesignH) kW (Medium-Hot Season) 3.6-3.6 SCOP (Medium-Hot Season) 4.0-5.1 (Medium-Warm Season) A+-A+++ Annual Energy Consumption kWh/A (Medium-Hot Season) 1260-988 Operating limit temperature (Tol) °C -15 Indoor unit Dimensions (LPA) mm 700-600-210 Net weight Kg 15,0 Packing dimensions (LPA) mm 1055-305-405 Packing net weight Kg 20,0 Air Flow (Min-Med-Max) m3/min 7.5-9.7-11.4 Sound Pressure (Min-Med-Max) dB(A) 35-40-46 Sound Power (Max) dB(A) 56 Outdoor Unit Dimensions (LPA) mm 800-333-555 Net weight Kg 34,5 Packing dimensions (LPA) mm 920-390-615 Packing net weight Kg 37,3 Air flow m3/min 33.3 Type ROTARY compressor Dimensions and Limitations of the Refrigerant Circuit Liquid side pipe mm 6.35 Gas side pipe mm 9.52 Length of Pipes Covered by Precharge m 5 Minimum recommended piping length m 3 Equivalent piping length (Max) m 25 Increase of Refrigerant g/m 15 Height difference (Max) m 10 R410A Refrigerant Type MIDEA CONSOLE Double air flow The console units send the air into the room not only from the directrix placed from the upper part but also from a special slot placed in the lower part of the product. Thanks to this mechanism, the room temperature is more uniform and comfortable. Four entrances in the air The consoles of the Midea range are equipped with a quadruple air inlet. It is made through special slits placed both on the upper and lower sides, and on the right and left. Super silent The internal fan motor is characterized by extraordinary silence, which allows the user to be able to enjoy the air conditioning even at night. All without altering either the air flow rate or the yield. Characteristics Reliability Health & Comfort Practicality Technical rooms air conditioning Refrigerant Loss Alarm Air intake I-Remote Anti-Freeze mode On/Off contact Double Exhaust Condensation Centralized Control Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€760,00
Midea Trial Split Inverter Air Conditioner PRIME 9+9+12 series with M3O-27NF8 R-32 9000+9000+12000 btu 1) Model Product code 2x MA2-09NXD0 Power 9000 btu Dimensions WxDxH mm 805x205x285 mm 2) Model Product code MA2-12NXD0 Power 12000 btu Dimensions WxDxH mm 805x205x285 mm OUTDOOR UNIT: Catalog number: M3O-27FN8-Q Gases: R-32 Max indoor units that can be combined: 3 Power (V/Hz/Φ) : 220~240/50/1 Capacity: Cooling down Nominal Capacity kW: 7.91 Absorbed power (Max): W 2460 SEER Seasonal Energy Efficiency: 6.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 425 Heating Nominal Capacity kW: 8.21 Absorbed power (Max): W 2250 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1960 Performance: Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 59 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxDxH) (mm): 845x363x702 ; 53 kgs Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: - "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability - High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. - Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. - Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP Index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA Prime The geometries used for the splits of the PRIME range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Internal fan rotation speed linear regulation The rotation speed of the internal fan, beyond the usual predefined activity levels, can be adjusted within the values 1-100%: Follow me function Prime series remote controls are equipped with a temperature sensor which the unit considers as "ambient" temperature. In fact, by setting the Follow me function, the appliance is able to "follow the real temperature perceived by the user, guaranteeing maximum comfort. Condensation control The units can work in cooling mode even with a low external temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Refrigerant leak alarm If the temperatures in the refrigerant circuit are irregular due to leaks, a specific fault code (EC) allows you to identify this condition. emergency function In the event of failure of one of the product's sensors, operation can continue in Emergency mode until the faulty part is replaced. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. Super cool function The Super Cool function is a real hallmark of PRIME air conditioners: activated by simply pressing a button, this particular mode maximizes the rotation speed of the internal fan, thus increasing the flow of cold air and allowing the appliance to reduce the temperature to 17°C as quickly as possible Gear function The Prime units are equipped with the GEAR function which offers the user the possibility of independently managing the power supplied by the unit, choosing one of the 3 different levels: 50%, 75% and 100%. In this way you can disregard the classic settings by concentrating solely on the "gear" in which you want the unit to operate: first, second or third. ECO function The Midea Prime series units are equipped with a special iECO mode which allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners "Do Not Disturb" mode By pressing a button on the remote control, Prime can enter DO NOT DISTURB mode, thus silencing all acoustic warnings, turning off the indoor unit display and optimizing the silence of the indoor fan. "Diamond" Outdoor Unit The external units feature a unique diamond cut shape with no visible screws on the face of the unit Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.238,00
Midea BreezeleSS+ 12000 btu R-32 A+++ Inverter Air Conditioner MSFAAU-09HRFN Model: Indoor unit code: MSFAAU-12HRFN8 Outdoor unit code: MOB01-12HFN8A Energy efficiency: SEER: 8.2 SCOP (medium-warm season): 4.6-5.3 Energy Efficiency Class (cooling): A+++ Energy Efficiency Class (heating) medium/hot season: A++/A+++ Performance: Min-nom-max cooling capacity: 1.32-3.52-4.37 kW Min-nom-max absorbed power in cooling: 130-857-1700 W Min-nom-max heating capacity: 0.88-3.81-4.40 kW Min-nom-max absorbed power in heating: 120-952-1550 W Air Flow (Min-Med-Max) m3/min 400-520-640 Indoor unit sound pressure ( (Silent-Min-Med-Max) (db(A)): 20.5-21-35.5-38.5 Internal unit sound power max db(A); 57 Max Outdoor Unit Sound Pressure (db(A)): 55.5 External unit sound power max db(A); 59 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 R32 Refrigerant Type Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35/9.52(1/4"/3/8") Operating limit temperature (Tol) °C -15 Operational Limits Internal temperatures - Cool.(Min-Max) °C WB 17 - 32 - Heating (Min-Max) °C DB 0 - +30 External temperatures - Cool.(Min-Max) °C DB -15 - 50 - Heating (Min-Max) °C WB -25 - 30 Dimensions and weight: Indoor Unit (LxWxH): 940-193-325 mm; 10.7Kg Outdoor Unit (LxWxH): 800-333-554; 28.5 kgs MIDEA BreezeleSS+ The BrezeeleSS+ indoor unit is designed to ensure maximum comfort thanks to the innovative airflow dispersion technology that uses the unique Twin FlapTM baffles with 7,928 tiny holes. Featuring a sinuous S-shape of the side outlets, BreezeleSS+ guarantees an unrivaled surround effect as well as an unmatched cooling speed. New Micro-hole diffusion technology The new micro-hole air diffusion technology significantly increases the well-being of your rooms thanks to a softer and more diffused air supply. And you will no longer be disturbed by annoying flows of cold air. A perfect pattern of TwinFlap™ micro-holes Double baffles with micro-holes, for the elimination of direct airflow. No more annoying air flows. Thanks to the internal and external double flap design, you can precisely adjust the direction and amount of airflow. The double baffles can divert and spread the flow more precisely offering an unmatched level of comfort. Grille diffuser The 7,928 micro-holes on the two deflectors are designed to transform the main airflow into small micro-puffs, allowing for optimal dispersion in all directions. The micro-perforated grid nebulizes the flow in such a gentle way as to be almost imperceptible, giving a sensation of freshness unattainable with traditional systems. Hourglass micro-holes The hourglass shape of each micro-hole disperses and mixes the cold air passing through the TwinFlap™ first pressurizing and then de-pressurizing it. Each micro-hole has a different shape and direction from the other, to ensure a uniform air dispersion effect and prevent water condensation on the baffles. Ultra-Wide Split Ultra-Fast Opening With a 70mm front opening and high-velocity cross-flow ventilation, the all-new BreezeleSS+ cools your room at incredible speed. High-Frequency Inverter Quattro™ Inspired by the performance and reliability of racing car engines, the BreezeleSS+ goes from 0 to 65Hz in 6 seconds, to then comfortably and stably maintain the target performance. The Quattro™ inverter, the heart of the BreezeleSS+, allows you to achieve cooling performance never experienced before. S-wing design Thanks to the sinuous S-shaped morphology of the outlets on the side edge, the air propagates in the rooms with an incomparable surround effect. Tests show that 3 outputs perform much better than 1 Traditional system One exit Irregular Heating / Cooling Strong full-bodied, direct flow BreezeleSS+ 3 air diffusers for 3 directions: center, right, left Precise and punctual temperature regulation No direct stream, just fresh Ultra quiet, only 20dB Sweet dreams for a better life The all-new streamlined design of the air duct and fan blows cool air through with minimal friction while reducing operating noise by up to 20dB. It is the same noise made by a flower as it grows. With BreezeleSS+, you have maximum comfort well into the night. Energy efficiency, class A+++ iECO mode: ultra-low power consumption all night Thanks to the inverter micro-chip and its smart functions, Midea BreezeleSS+, can work stably up to 8 hours at ultra-low frequency. The SEER value at 8.5 is the guarantee of the exceptional energy efficiency of the product. Smart Versatile, smart functions via App The MideaAIR app is much more than a digital remote control for your air conditioner: it allows you to start the air conditioner away from home, adjust the humidity level between 30% and 90%. Furthermore, it is able to automatically start cleaning and program the intelligent cooling curve during sleeping hours. Adjustable deflectors, editable design iECO mode: ultra-low energy consumption all night long Simultaneous adjustment of TwinFlap™ allows flexible climate control that adapts to your needs. It is possible to choose between “gentle” and “very gentle” airflow modes thanks to the adjustment of the double adjustable deflectors. It is possible to enjoy maximum comfort without perceiving any movement of air. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€665,00
Technical features Model: Indoor unit code: MTBE-35 Outdoor unit code: MOUE-35K Technology: 3D DC INVERTER Power: 12000 btu/h Energy efficiency: Cooling efficiency SEER: 6.1 SCOP coefficient of performance: 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Power Output in cooling: 3.5 kW Power Output in heating: 3.8 kW Power absorbed in cooling: 1030 W Power absorbed in heating: 995 W Air Flow (Max / Med / Min) (m3/min): 7.5-9.7-11.3 Indoor unit Sound Pressure (Max / Med / Min) (db(A)): 42/38/35 Internal unit sound power max db(A); 54 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35(1/4") / 9.52(3/8") Operating Limit Temperature: -15 Dimensions and weight: Indoor Unit (LxWxH): 700x635x210 mm; 18 Kgs Outdoor Unit (LxWxH): 810x333x555 mm; 35 kgs To view more product information CLICK HERE General characteristics Single Ducted Indoor Units Flexible air return Rear air inlet is standard, while bottom air inlet is optional. The dimension of the bottom plate and the back flange are the same, so it is easy for the installer to change the air inlet from the back to the bottom Integrated drain pump The drain pump, capable of lifting the condensed water up to 750mm, is standard for both the 4-Way Cassette and the Ducted units. Twin combination Some types of indoor units can be installed in "Twin" mode: a single outdoor unit can connect to two indoor units, expanding the scenario of possible installations. Available in combinations: 18k+18k, 24k+24k, 30k+30k. to air-condition Server Rooms and/or technical rooms. Fresh air intake The "Air Fresh" intake is standard, it is easy to connect it to the external air passage hole.maintenance and assistance Series features: Gas Leak Alarm : In the event that careless installation of the system should cause micro-leaks of refrigerant gas, the system displays a specific alarm signal. Self-diagnosis A performance monitoring system allows Midea air conditioners to diagnose any malfunctions and failures. Technical rooms air conditioning A special technology allows all Midea Splits to be able to operate in "cooling" mode even with external temperatures down to -15°. Ideal for air conditioning Server Rooms and/or technical rooms. Outdoor Unit Heating Tape A PTC heating tape mounted on the base plate of the outdoor unit prevents rain, water or snow from accumulating, ensuring safer operation. Follow me Midea remote controls are equipped with a temperature sensor, which the unit considers as "ambient temperature". The air conditioner therefore works by "following" the real temperature perceived by the user. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€894,00
Ducted air conditioner Midea Inverter 12000 btu R-32 MTIU-12FNXD0 with wired control A++ Model: Indoor unit code: MTIU-12FNXD0 Outdoor unit code: MOB30-12HFN8 Power; 12000 btu/h Energy efficiency: Cooling efficiency SEER: 6.5 SCOP coefficient of performance (Medium Season): 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Cooling capacity kW (Min-Nom-Max) 1.49-3.51-4.75 Heating kW capacity (Min-Nom-Max) 0.97-4.10-5.63 Power absorbed in cooling: 350-950-1620 W Power absorbed in heating: 350-1100-2050 W Indoor unit sound pressure (Min/Med/Max) (db(A)): 28-35-40 Internal unit sound power max db(A); 60 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35(1/4") / 12.7(1/2") Dimensions and weight: Indoor Unit (LxWxH): 700-450-200 mm ; 18 Kgs Outdoor Unit (LxWxH): 800-333-554 mm; 29 kgs Midea ducted R-32 The ducted solution is the idea for all those who want to minimize the visual impact of the air conditioning system, creating a real "invisible" air conditioning system with high performance. The possibility of selecting the flow rate and pressure of the fan on 4 different power levels allows the products to be adapted to various configurations of the duct network. The complete range of accessories makes application simple and immediate in any context. Condensate Drain Pump The ductable units are equipped with a condensate drain pump to facilitate the evacuation of the liquid and facilitate installation. Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. Contact Alarm The indoor units are equipped with a logic output which allows the product failure condition to be exported for connection to remote malfunction indication systems. G2 filter The units are equipped with filter and filter holder in standard configuration Display with IR receiver The indoor unit is equipped with an alphanumeric display with integrated IR receiver KRJ-120 G wired controller Indoor units can be connected to the wired controller which has weekly schedule function Fan speed adjustment The rotation speeds of the fan can be adjusted to 4 or 6 different speed levels to be adapted to the configuration of the duct network Fresh air intake The unit has vents in its frame to supply fresh air or fresh air. There are terminals on the indoor units for direct control of an supply fan Fresh air intake The unit has vents in its frame to supply fresh air or fresh air. There are terminals on the indoor units for direct control of an supply fan ON-OFF input The internal units are equipped with a logic input which allows the product to be switched on and off from an external device. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€853,00
Midea Trial Split Inverter Air Conditioner PRIME 9+9+12 series with M3OF-21HFN8-Q R-32 9000+9000+12000 btu 1) Model Product code 2x MA2-09NXD0 Power 9000 btu Dimensions WxDxH mm 805x205x285 mm 2) Model Product code MA2-12NXD0 Power 12000 btu Dimensions WxDxH mm 805x205x285 mm OUTDOOR UNIT: Catalog number: M3OF-21HFN8-Q Gases : R-32 Minimum-max number of connectable indoor units: 3 Energy efficiency - Cooling down Nominal Capacity kW: 7.91 Absorbed power (Max): W 2460 SEER Seasonal Energy Efficiency: 6.6 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 425 - Heating Nominal Capacity kW: 8.21 Absorbed power (Max): W 2250 SCOP Seasonal Energy Efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1960 Performance Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 59 Sound power (Max) dB(A): 65 Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Characteristics Max. Total length/ each IU m 30/20 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 Dimensions Indoor Unit WxDxH (mm): 730×198×293 ; 7.4kg Outdoor Unit (LxDxH) (mm): 845x363x702 ; 53 kgs MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: - "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability - High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. - Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. - Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA Prime The geometries used for the splits of the PRIME range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Series features: Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Internal fan rotation speed linear regulation The rotation speed of the internal fan, beyond the usual predefined activity levels, can be adjusted within the values 1-100%: Follow me function Prime series remote controls are equipped with a temperature sensor which the unit considers as "ambient" temperature. In fact, by setting the Follow me function, the appliance is able to "follow the real temperature perceived by the user, guaranteeing maximum comfort. Condensation control The units can work in cooling mode even with a low external temperature to air-condition technical rooms. ECO function This function makes it possible to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Refrigerant leak alarm If the temperatures in the refrigerant circuit are irregular due to leaks, a specific fault code (EC) allows you to identify this condition. emergency function In the event of failure of one of the product's sensors, operation can continue in Emergency mode until the faulty part is replaced. The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency 2% higher than R410A Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. Super cool function The Super Cool function is a real hallmark of PRIME air conditioners: activated by simply pressing a button, this particular mode maximizes the rotation speed of the internal fan, thus increasing the flow of cold air and allowing the appliance to reduce the temperature to 17°C as quickly as possible Gear function The Prime units are equipped with the GEAR function which offers the user the possibility of independently managing the power supplied by the unit, choosing one of the 3 different levels: 50%, 75% and 100%. In this way you can disregard the classic settings by concentrating solely on the "gear" in which you want the unit to operate: first, second or third. ECO function The Midea Prime series units are equipped with a special iECO mode which allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners "Do Not Disturb" mode By pressing a button on the remote control, Prime can enter DO NOT DISTURB mode, thus silencing all acoustic warnings, turning off the indoor unit display and optimizing the silence of the indoor fan. "Diamond" Outdoor Unit The external units feature a unique diamond cut shape with no visible screws on the face of the unit Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.092,00
Ducted air conditioner Midea Inverter 12000 btu R-32 MTIU-12HWFNX-QRD0W complete with remote control and wired control A++ Wi-Fi Optional - NEW Model: Indoor unit code: MTIU-12HWFNX-QRD0W Outdoor unit code: MOX230-12HFN8-QRD0W Power; 12000 btu/h Energy efficiency: Cooling efficiency SEER: 6.5 SCOP coefficient of performance (Medium Season): 4.0 Energy Efficiency Class (cooling): A++ Energy Efficiency Class (heating): A+ Performance: Cooling capacity kW 3.52 (0.53 - 3.99) Heating kW capacity 3.81 (1.00 - 4.39) Power consumption cooling/heating : 1.05 (0.15 - 1.37) / 1.03 (0.30 - 1.39) W Internal unit sound pressure (db(A)): 34.5 / 30.5 / 29 / 23 Internal unit sound power max db(A); 58 Sound Pressure (outdoor unit) dBA 53.6 Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant Piping Liquid / Gas Line: mm(inch) 6.35 / 9.52 Dimensions and weight: Indoor Unit (LxWxH): 700-450-200 mm; Outdoor Unit (LxWxH): 765 x 303 x 555 mm Midea ducted R-32 The Midea ducted inverter air conditioner is suitable for the air conditioning of offices and commercial premises. It has a high energy class A++ for cooling and A+ for heating. The air conditioning system allows installation in narrow ceilings due to its low height. The models of the series have automatic restart, night mode, Anti-cold Air function. Night mode When night mode is activated during cooling, the air conditioner automatically raises the room temperature by 1°C for the first two hours, after which it remains fixed. By activating night mode during heating, the air conditioner automatically lowers the room temperature by 1°C for the first two hours, after which it remains fixed. Anti cold air The fan speed in the indoor unit of the air conditioner is automatically adjusted according to the evaporator temperature when heating the room. This prevents cold air from blowing when the air conditioner is started in heating mode. Self defrosting Function for automatic defrosting of the air conditioner outdoor unit and maintenance of the dehumidification effect at low outdoor temperatures. Fresh air inlet Outside air can be brought in through an additional ventilation duct. This ensures clean and fresh air in the air-conditioned room. Automatic restart In the event that the air conditioner stops operating unexpectedly due to a power failure, it will restart automatically as soon as the power is restored and resume operating in the mode set before it was turned off. Built-in condensate pump The built-in condensate pump allows the condensate to rise up to a maximum of 750mm. Twin system The Twin system consists of two indoor units of different power from the same series connected to a single outdoor unit. Easy maintenance and service The air conditioning system is specially optimized for easy maintenance and service. Wired control The wired controller can be fixed to the wall for a permanently mounted control solution. Centralized management (optional) The central controller is a multifunctional device that can control up to 64 indoor units with a maximum connection length of up to 1200 meters. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€855,00
Technical features Indoor unit catalog number : MSMA2BU-12HRDN8 Outdoor unit catalog code : MOX133-12HFN8 Power : 12000 Btu Energy efficiency SEER : 6.1 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual Energy Consumption in Cooling : 211 kWh/a Annual Energy Consumption in Heating: 686 kWh/a Performance Cooling Capacity: 3.52 kW Heating Capacity: 3.81 kW Cooling Absorption: 1213 W Heating absorption: 1100 W Air flow rate : 10 m 3 /min Sound Power Level Indoor Unit : 53 dB(A) External Unit Sound Power Level: 63 dB(A) Sound Pressure Level Indoor Unit: 22-28-34-38 dB(A) Sound Pressure Level Outdoor Unit: 56 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operating range - Cooling: -15° ~ 50°C - Heating: -15° ~ 30°C Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Maximum piping length: 25 m Maximum height difference Indoor Unit / Outdoor Unit: 10 m Maximum absorbed current: 9.8 A Dimensions and weight Internal Unit Dimensions (WxHxD): 805x285x205 mm Indoor Unit Weight: 7.9 Kg External Unit Dimensions (WxHxD): 770x550x270 mm Weight of Outdoor Unit: 22.7 Kg Midea First Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Speed linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values 1-100%. Gear function The GEAR function allows you to adjust the maximum rotation speed of the compressor, limiting its capacity to 75% and 50% of the nominal value, improving efficiency. supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Follow me The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a precise reading even when changing rooms. Sophisticated design The design of the First range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€264,00
You have seen 36 out of 43 products
