LG Dual Split Inverter Air Conditioner ATMOSFERA 9+12 series with MU2R17 R-32 Integrated Wi-Fi 9000+12000 Indoor Units 1) Model Internal Unit Catalog Code: AP09RT.NSJ Power : 9000 Btu Internal Unit Dimensions (WxHxD): 857x348x189 mm Indoor Unit Weight: 9.5 Kg 2) Model Internal Unit Catalog Code: AP12RT.NSJ Power : 12000 Btu Internal Unit Dimensions (WxHxD): 857x348x189 mm Indoor Unit Weight: 9.5 Kg Outdoor unit Model: Catalog code : MU2R17 UL0 Gases : R-32 Power (V/Hz/Φ) : 1220~240-50 Max indoor units that can be combined: 2 Pipe diameter liquid gas 1/4 " - 3/8" Energy efficiency: SEER: 7.8 SCOP: 4.2 Energy Efficiency Class (Cool) : A+++ Energy Efficiency Class (Heating) : A+ Performance: Cooling Capacity (kW): 4.7 Heating capacity (kW): 5.3 Operating limits: Cool Min~Max °C -10~48 Heating Min~Max °C -18~18 Dimensions and weight Outdoor Unit WxHxD (mm): 770 x 545 x 288; 37kg Dual Inverter compressor guaranteed for 10 years LG, which places great faith in the quality and reliability of its products, offers a 10-year warranty on the Inverter compressor of all mono and multi-split models featured in this catalogue. The warranty mentioned above covers the costs of the Inverter compressor only for a total period of 10 years from the date of purchase of the air conditioner. Any other cost other than the value of the replaced component alone is to be considered excluded from coverage. LG Multisplit systems LG is among the world's leading manufacturers of air conditioners. The MULTISPLIT product range is characterized by high flexibility, very high energy efficiency and low noise levels. Multisplit solutions make it possible to address both the needs of small residential systems and the needs of commercial spaces. Quality and Safety Guarantee LG is extremely attentive to the quality of its products and to environmental issues. LG offers on its air conditioners, in addition to the 24-month statutory warranty, an additional 3-year warranty on compressors, an exclusive formula to let you choose in full safety. All LG air conditioners have obtained the most important international quality and safety certifications. All LG air conditioners are made with environmentally friendly technologies and use R-410A refrigerant which does not produce deleterious effects on the ozone layer. The high energy efficiency that characterizes them helps to reduce CO2 emissions. LG adheres to collective collection systems that guarantee a completely safe disposal service for end-of-life products. Seasonal energy efficiency The outdoor units of the new multi-pipe Multi range are characterized by seasonal energy efficiency levels already in line with the European standards in force since 2014. The SEER level is higher than 6.10 and will allow these products to obtain the A++ classification for their seasonal cooling energy efficiency. The new Multi range with multiple pipes makes it possible to reduce energy consumption by 37% (average) compared to the previous series. Multi outdoor units are characterized by extremely high levels of energy efficiency. Thanks to this premise, they contribute significantly to the reduction of carbon dioxide emissions. Wide Louver heat exchanger Thanks to this premise, they contribute significantly to the reduction of carbon dioxide emissions The heat exchanger with Wide Louver fins is applied to the outdoor units. The special processing of the fins improves the exchange capacity of the radiator by 28% for the same surface area compared to a traditional exchanger. Wide operating range The outdoor units of the Multi Pipe range can operate in cooling and heating mode under the most extreme conditions. The presence as standard equipment of the condensation control for the cooling mode makes them compatible with all applications where it is necessary to refresh the air even at low external temperatures (e.g. restaurants, gyms, server rooms). Pressure controlled operation The new units in the Multi-pipe range operate with control based on the pressure of the refrigerant in the circuit: this type of control ensures better management of the peripherals contained in the units compared to traditional temperature controls. This control mechanism is more precise and refined, without being negatively affected by external temperature variations. The new technology applied to these products makes it possible to obtain the desired results in shorter times, to better manage the operation of the compressor under partial load conditions, and to make significant reductions in electric current absorbed. Wiring error checking function Thanks to this function, at the end of the installation work it is possible to verify that the electrical and piping connections are correctly associated. Through this control function, which can be activated from the electronic board of the outdoor unit, it is possible to achieve a correct and fully functional installation quickly and easily. Reduced power consumption in Stand-by An innovative function allows you to remove the power supply to the system components during the stand-by phase of the system. In this way, the stand-by electricity consumption of the new multi-pipe Multi outdoor units is 90% lower than the previous versions. Reduced sound level The adoption of a new fan protection grille and the use of fans with details specifically designed for aerodynamic optimization have allowed a reduction in the noise level of the outdoor units in the order of about 2 dB(A) at nominal conditions of detection. LG Atmosphere Cleanliness and freshness LG air conditioners are characterized by a 2-in-1 purification system (air cooling and filtration) capable of filtering fine dust, germs and pollutants such as PM 1.0. Smart 4-color display The PM 1.0 sensor detects ultra-fine dust in real time and shows the level of air quality in 4 different colors Energy saving Inverter technology is able to modulate the power supplied according to actual needs; this makes it possible to keep the temperature constant, avoiding waste of energy, in favor of greater efficiency and maximum energy savings Fast cooling A wider and perfectly designed airflow allows you to reach even the furthest corners and cool the room faster. Check how much energy you consume The slim and modern designs of LG air conditioners make installation easier and cleaning the product more convenient thanks to the EZ sliding filter. In addition, the retractable display is perfect for convenient control of the energy display. Maximum silence LG air conditioners ensure reduced noise thanks to the special Skew Fan and Inverter compressor, which eliminate unnecessary noise and allow the product to operate as quietly as possible. Ease of installation LG air conditioners are designed to be installed simply and efficiently, regardless of the environment in which they are placed and the number of people involved in the installation process, allowing for a reduction in installation times. Perfect adherence to the Wall More space for piping Installation plate with anchor screws Removable bottom panel Lifting clips 6-step vertical flow control You can choose from 6 preset positions to meet your different needs in terms of airflow direction. Auto Cleaning The efficient Auto Cleaning function prevents the formation of bacteria and mold on the heat exchanger, creating a more pleasant and comfortable environment. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.620,00
LG Air Conditioner Quad Split Inverter LIBERO SMART 9+9+9+12 series with MU4R27 U40 R-32 Integrated Wi-Fi 9000+9000+9000+12000 Technical features Indoor units 1) Model Internal Unit Catalog Code : 3x S09ET NSJ Power: 9000 btu/h Cooling Capacity : 2.5 kW Heating Capacity : 3.2 kW Treated Air: 9.2 m 3 /min Sound pressure level : 27~33~36 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 837x308x189 mm Indoor Unit Weight: 8.7 Kg Integrated Wi-Fi 2) Model Internal Unit Catalog Code : 1x S12ET NSJ Power: 12000 btu/h Cooling Capacity : 3.5 kW Heating Capacity : 3.8 kW Treated Air: 9.6 m 3 /min Sound pressure level : 27~35~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 837x308x189 mm Indoor Unit Weight: 8.7 Kg Integrated Wi-Fi Outdoor Unit Model: Indoor Unit catalog code: MU4R27 U40 Max indoor units: up to 4 indoor units Energy efficiency: SEER : 8.20 SCOP : 4.20 Cooling Energy Efficiency Class: A++ Heating Energy Efficiency Class: A+ Annual energy consumption Cooling/Heating : 299 /2333 kWh/a Performance: Cooling Capacity: 7.0 kW Heating Capacity: 8.4 kW Std cooling absorption: 1.5 kW Std heating absorption: 1.8 kW Sound power level : 64 dB(A) Sound pressure level : 49~53 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x4 Gas pipe diameter : 9.52 mm (3/8") x4 Guaranteed temperature range: - Cooling: -10° ~ 48°C - Heating: -18° ~ 18°C Dimensions: External Unit Dimensions (WxHxD): 950x834x330 mm Weight of Outdoor Unit: 61 Kg LG Free Smart Style and elegance The simple and linear design of LG air conditioners guarantees perfect installation, excellent adherence to the wall and easy cleaning of the product. Compatibility LG introduces the new wall mounted units, which can be used in mono and multi-split configurations. Compatibility makes it possible to obtain the maximum cooling and heating capacity and, above all, to be able to integrate different systems in the same application, preserving the aesthetic continuity of the indoor units. Simplified installation Installing an air conditioner has never been easier! LG products are designed and manufactured to be installed quickly and efficiently. And the small size of the indoor and outdoor units also saves space. Built-in Wi-Fi Where you want, when you want! Controlling your air conditioner with LG's Smart technologies is even easier today. Thanks to the integrated Wi-Fi and an Internet connection, you can manage the main functions of your air conditioner through the application for all Android or iOS smartphones Voice control Indoor unit compatible with Google Home and Alexa voice assistants BLDC Compressor (Brushless Direct Current Motor) The outdoor units of the Multi range are equipped with BLDC compressors equipped with motors with neodymium magnets. These compressors are characterized by higher energy efficiency than traditional inverter compressors, and operate optimally in all rotation conditions. This guarantees high seasonal energy efficiency values. BLDC fan motor The BLDC fan motor is more efficient than the traditional AC motor, offering energy savings of up to 40% at high speeds and up to 20% at low speeds. Wide Louver heat exchanger The Wide Louver fin heat exchanger is applied to the outdoor units. The particular processing of these fins allows to considerably improve the exchange capacity of the radiator compared to a traditional exchanger. Noise reduction mode Thanks to a series of settings applicable to the units via the electronic card, it is possible to reduce the noise level of the outdoor units during the night, to the advantage of the comfort and livability of residential complexes. Lightweight and compact units The LG outdoor units of the Multi range have been designed and built with a rational design and reduced in size and weight lower when compared with that of the previous units. This makes them easy to handle and easy to install. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.017,00
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€125,00
Technical features Product code: PREMTB001 Dimensions (WxHxD): 120x120x15 mm Notes: Cable supplied with a length of 10m LG The use of wired controls on the indoor units allows you to manage the operation of the products in a different way to what is possible with the traditional infrared control. The large LCD display, the blue backlighting and the elegant design make this accessory a complement that enhances spaces. The use of the wired control allows you to use a weekly programming for the management of the unit and allows you to detect the room temperature directly from the position in which it is located. Functions Optional standard wired control ON-OFF function, fan speed, temperature adjustment, display backlighting, infrared command receivers Room temperature sensor, Air flow direction flap control, Weekly timer (2 switching on/off per day. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€87,00
NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM161MR U34 Energy efficiency EER: 4.0 SCOP : 4.7 Energy efficiency class in heating: A+++/A++ Performance Cooling capacity : 16.0 kW Heating capacity: 16.0 kW Nominal flow rate : 2760 l/h Sound power level : 61 dB(A) Sound pressure level : 39 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 80° C Installation data Inlet Pipe Diameter : 25.4 mm (1") Male Outlet piping diameter : 25.4 mm (1") Male Dimensions and weight External unit dimensions (WxHxD): 1239x1380x330 mm Outdoor unit weight: 118.6 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. What is a heat pump? The LG THERMA V air-to-water heat pump provides heating, cooling and domestic hot water without using fossil fuels, providing 100% renewable energy for an efficient and comfortable home The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO 2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outside temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.287,00
NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM123MR U34 Energy efficiency EER: 4.75 SCOP: 4.9 Energy efficiency class in heating: A+++ Performance Cooling capacity : 12.0 kW Heating capacity : 12.0 kW Nominal flow rate : 2070 l/h Sound power level : 60 dB(A) Sound pressure level : 38 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 80° C Installation data Inlet Pipe Diameter : 25.4 mm (1") Male Outlet piping diameter : 25.4 mm (1") Male Dimensions and weight External unit dimensions (WxHxD): 1239x1380x330 mm Outdoor unit weight: 118.6 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. What is a heat pump? The LG THERMA V air-to-water heat pump provides heating, cooling and domestic hot water without using fossil fuels, providing 100% renewable energy for an efficient and comfortable home The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO 2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outdoor temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.100,00
NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM051MR U44 Energy efficiency EER: 4.7 SCOP: 4.46 Energy efficiency class in heating: A+++ Performance Cooling capacity : 5.5 kW Heating capacity: 5.5 kW Nominal flow rate : 948 l/h Sound power level : 57 dB(A) Sound pressure level : 35 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 80° C Installation data Inlet Pipe Diameter : 25.4 mm (1") Male Outlet piping diameter : 25.4 mm (1") Male Dimensions and weight External unit dimensions (WxHxD): 1239x834x330 mm Outdoor unit weight: 89.0 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. What is a heat pump? The LG THERMA V air-to-water heat pump provides heating, cooling and domestic hot water without using fossil fuels, providing 100% renewable energy for an efficient and comfortable home The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO 2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outdoor temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.575,00
NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM071MR U44 Water pump : Grundfos UPM3K 20-75 CHBL Energy efficiency EER: 4.5 SCOP : 4.7 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 7.0 kW Heating Capacity: 7.0 kW Nominal flow rate : 1206 l/h Sound power level : 57 dB(A) Sound pressure level : 35 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 80° C Installation data Hydraulic Pipe Diameter Inlet: 25.4 mm (1") Male Hydraulic piping diameter Exit : 25.4 mm (1") Male Dimensions and weight External Unit Dimensions (WxHxD): 1239x834x330 mm Weight of Outdoor Unit: 89.0 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and requirement What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outside temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.615,00
NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM091MR U44 Water pump : Grundfos UPM3K 20-75 CHBL Energy efficiency EER: 4.2 SCOP: 4.55 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 9.0 kW Heating Capacity: 9.0 kW Nominal flow rate : 1554 l/h Sound power level : 57 dB(A) Sound pressure level : 35 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 80° C Installation data Hydraulic Pipe Diameter Inlet: 25.4 mm (1") Male Hydraulic piping diameter Exit : 25.4 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1239x834x330 mm Weight of Outdoor Unit: 89.0 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monobloc THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outdoor temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.900,00
Technical features Catalog code : HM143MR U34 Power : 14 kW Color : Silk gray / RAL 7044 Energy efficiency SCOP: 3.46 Seasonal heating efficiency: 135% Energy efficiency class in heating: A++ Performance Cooling Capacity: 14.0 kW Heating Capacity: 14.0 kW Nominal flow rate : 40.3 l/min Sound Power Level : 57~61 dB(A) Sound Pressure Level : 35~39 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Operating Limits Waterfall Cooling: -15° ~ 65°C Heating: 5° ~ 27°C DHW : 15° ~ 80° C Air Cooling: -25° ~ 35°C Heating: 5° ~ 48° C Installation data Inlet hydraulic circuit piping diameter: 25.4 mm (1") Outlet hydraulic circuit piping diameter: 25.4 mm (1") Dimensions and weight Dimensions (WxHxD): 1239x1380x330 mm Weight : 118.6Kg LG Therma V TM Monoblock S R-32 THERMA V Monobloc S R32 is the second generation of LG's Monobloc R32 which combines the best performance of the THERMA V series and a reduced noise level, thanks to the cutting-edge technology of the "acoustic shield", placed over the compressor to reduce vibrations produced by the operation of the machine. Monobloc S R32 combines the indoor unit and outdoor unit as a single module and is connected only by water pipes, eliminating the need for refrigerant pipes. Furthermore, the hydronic components such as plate heat exchanger, expansion vessel, water pump, flow sensor, pressure sensor, air vent valves and safety valve are located inside. inside the unit. Monobloc S R32 provides excellent heating performance, especially at low temperatures, while reducing its carbon emissions Improved installation flexibility All-in-one outdoor unit Low noise that allows high installation flexibility Outdoor unit with built-in hydronic components: water pump, flow meter, pressure sensor, expansion vessel, air vent valve, etc. Easy to use installation settings interface Optional backup electric heaters (3kW or 6kW) Improved connectivity for third party backup electric heaters High efficiency and wide operating range R32 refrigerant with low global warming potential (GWP) Less environmental impact with a low amount of refrigerant 100% heating capacity at -15° C OAT (@ LWT 35° C, except 16kW model) Improved heating operation in defrost conditions SCOP up to 4.67 (average climate / low temperature application): A+++ SCOP up to 3.47 (Average climate / medium temperature application) : A++ COP up to 4.90 (External air 7° C / Supply water 35° C) Delivery water temperature up to 65°C Innovative design and technology Improved heat exchanger design (Black Fin) Integrated water flow and pressure sensors for real-time monitoring Advanced circulator options (optimum flow rate, fixed capacity, fixed flow rate, fixed ?T) Improved 2nd loop control logic Modbus connectivity without gateway Control for the DHW circulation pump according to the program Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.026,00
NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM161M U33 Energy efficiency EER : 4 SCOP: 4.45 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 16.0 kW Heating Capacity: 16.0 kW Nominal flow rate : 2760 l/h Sound Power Level Indoor Unit : 63 dB(A) Sound Pressure Level Outdoor Unit : 52 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 55° C Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1239x1380x390 mm Weight of Outdoor Unit: 124.8 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and requirement What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monoblock THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outside temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.645,00
NON-OBLIGATORY PAID IGNITION BY THE SERVICE CENTER Technical features Product code : HM121M U33 Energy efficiency EER: 4.6 SCOP: 4.45 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 12.0 kW Heating Capacity: 12.0 kW Nominal flow rate : 2070 l/h Sound Power Level Indoor Unit : 63 dB(A) Sound Pressure Level Outdoor Unit : 52 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Operational Limits Air Heating : -25° ~ 35° C Cooling : 5° ~ 48° C Operating Limits Water Heating : 15° ~ 65° C Cooling : 5° ~ 27° C DHW : 15° ~ 55° C Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1239x1380x390 mm Weight of Outdoor Unit: 124.8 Kg LG Heat Pumps Therma V Line LG offers a wide range of highly efficient renewable energy systems and provides the ideal solution for every application and need What is THERMA V ? THERMA V is LG's new air-to-water heat pump system, designed for new homes and renovations with the most advanced energy-saving heating technologies. THERMA V is the ideal solution for heating, cooling and the production of domestic hot water in domestic environments. The most complete and efficient solution for your home THERMA V offers the best solution for domestic heating and for the supply of domestic hot water. Thanks to LG's inverter technology, THERMA V systems are up to 4 times more efficient than traditional boilers Applications : Fan Coil Radiators Radiant floor Hot water Why Choose LG THERMA ? LG THERMA V is designed to provide the user with energy saving, comfort, simplified control and support services, thanks to the application of advanced LG technologies. LG's Inverter technology provides high energy efficiency, achievable with the use of components such as circulation pump, heat exchanger and fan motor completely designed and manufactured by the company Furthermore, the pressure control technology allows a stable and reliable heating capacity even at low temperatures and the achievement of the performance target effectively The new packaged units, thanks to the corrosion-resistant Ocean Black Fin treatment and user-friendly control with the new RS3 command, meet the needs of both professionals and end users High performance High energy efficiency SCOP 4.45 A+++ Maximum performance at low temperatures Operating range down to -25°C Water delivery temperature 65°C up to -5° C Low noise level Innovative vapor injection scroll compressor User benefits New user-friendly control interface WiFi with LG Smart ThinQ Double independent thermal zone control Temperature control of water, air or both at the same time Simplified installation and maintenance Monobloc unit with reduced weight and dimensions. No refrigerant piping installation is required Simplified initial start-up and configuration: from PC using LG Heating Configurator software R32 monobloc THERMA V Monobloc R32 includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing installation without the use of refrigerant gas pipes LG high efficiency solutions for heating and domestic hot water LG products represent the sustainable and efficient solution for heating in domestic and commercial applications, thanks to continuous investments in research and development of renewable energy technologies The LG THERMA V residential heating solution can be dedicated both to space heating and cooling and to the production of domestic hot water. Compared to traditional boiler systems, it is more efficient and reduces CO2 emissions by using renewable energy (contained in the outside air.). In addition, the entire system can be managed and monitored remotely via the LG Smart ThinQ app The LG control system offers a variety of solutions that allow you to reduce operating costs and maintain efficient control of the energy used. The new RS3 wired controller, together with other accessories, offers a simple interface to facilitate control, configuration and monitoring of the system New Scroll compressor The new vapor injection scroll compressor combines high performance, efficiency and reliability. Compared to traditional scroll compressors, it allows to reach water temperatures up to 65°C, reduce noise and increase the rotation speed range (10-135 Hz) Noise Level Reduction THERMA V Monobloc R32 has a lower noise level than the previous model Steam injection When using R32 refrigerant it is very important to correctly control the gas discharge temperature from the compressor. In the case of THERMA V Monobloc R32, steam injection technology was used to efficiently control the compressor discharge temperature. This allows to increase the field of use of the heat pump (up to -25°C outside) and to improve the heating performance at low temperatures Delivery temperature up to 65° C THERMA V Monobloc R32 is capable of producing hot water up to 65°C, thus being able to supply medium/high temperature terminals (e.g. radiators) without problems. For this reason, the LG solution is suitable for both renovations and new buildings Temperature Control Options To ensure greater comfort, efficiency and savings, multiple temperature control options are available. Furthermore, simultaneous air and water temperature control functions have been added, particularly suitable for the European lifestyle, very attentive to thermal comfort Seasonal Climate Mode Seasonal weather mode adjusts the heat pump operation automatically based on the outside temperature. It is used to set the water temperature in order to maximize energy savings by exploiting the integrated climatic regulation Silent mode and weekly programming Using the command it is possible to activate the Silent Mode function to reduce the noise emissions of the outdoor unit to a minimum. By means of the timer it is also possible to program the start-up and deactivation of the cycle. Using the command it is also possible to set the weekly programming of the heat pump operation Simplified Installation and Maintenance Monobloc module THERMA V Monobloc includes all the main hydraulic components (plate exchanger, expansion tank and circulation pump) in a single outdoor unit, allowing it to be installed without using refrigerant gas pipes Easy Startup Setting of operating parameters before installation Based on the information relating to the system, the installer can set the parameters using the "LG Heating Configurator" software and save the data on a memory card directly from the office. On site, simply insert the card on the back of the wired controller to activate the configuration Easy Maintenance Data Logging The remote control can memorize up to 50 events, making it possible to easily identify the causes of any malfunctions Date and time Operating modes (Heating, Cooling, Automatic, Domestic hot water) Temperature targets Flow / return temperature Room temperature DHW (Operating Status / Target Temperature / Current Temperature) Outdoor unit operation Errors and related code Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.035,00
You have seen 516 out of 526 products
