ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT THE IMMERGAS AREA ASSISTANCE IN ADVANCE IMMERGAS VICTRIX 35 TT INTERNAL/EXTERNAL CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Immergas Victrix 35 TT condensing boiler Capacity: 32Kw Useful heating power kW: 32.0 DHW useful power kW: 34.2 Type: snapshot Modulation range: 12 - 100% Hot water production (∆t 30 °C) l/min: 16 , 3 Electrical protection degree IPX: 5D Dimensions (HxWxD): 748x440x255 mm Weight: 33Kg VICTRIX kW TT With VICTRIX kW TT, a generation of boilers is born, destined to offer a great variety of solutions thanks also to the extreme dimensional compactness in just 25 centimeters deep. Designed to comply with the new European Directives ErP and ELD, it makes it easier to reach the high efficiency classes in space heating and in the production of domestic hot water in homes. Approved to operate indoors and outdoors, even in the open by means of a special optional cover kit. The IPX5D degree of electrical protection and the boiler is equipped with standard antifreeze protection down to -5 °C. Electricity saving thanks to the low consumption, class A, modulating circulator. The innovative condensing module guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater resistance to corrosion thanks to the special alloy with which it is made. The modulating circulator has low consumption and the wide modulation range of the appliance from 12 to 100% of the thermal power allows high seasonal yields with a consequent reduction in gas consumption. The new electronic board allows precise control of combustion regardless of the gas used (methane/LPG or propane air) and, via a simple app, allows the management of VICTRIX kW TT also from smartphones, tablets and laptops (starting from January 2016 VICTRIX kW TT can be installed recessed with OMNI CONTAINER frame but also in SOLAR CONTAINER or DOMUS CONTAINER to create GAUDIUM SOLAR ErP or TRIO ErP systems. The built-in installation allows the boiler to be positioned outside in a niche and therefore to recover living space. With VICTRIX kW TT Immergas takes the installation flexibility of condensing boilers even further and offers a great variety of solutions also thanks to the extreme dimensional compactness in just 25 centimeters deep. All boilers can be installed: inside of; built-in with OMNI CONTAINER but also in SOLAR CONTAINER or DOMUS CONTAINER to add products that use solar thermal and heat pumps to the boiler in GAUDIUM SOLAR ErP or TRIO ErP applications outdoors in partially protected places; and today also in the open air with the dedicated cover kit. Thus the possibilities of creating systems that comply with the new European Directives increasingly oriented towards condensing technology to reduce pollution and increase energy savings increase. The eco-friendly VICTRIX kW TT condensing range expresses the best of Immergas technology, offering great performance thanks to the innovations introduced in the product design. Characteristics HIGH HYDRAULIC PERFORMANCE Primary condensing exchanger, made of an Aluminium-Silicon-Magnesium alloy, particularly resistant to corrosion. Designed to have high flow rate and head performance even on old heating systems thanks to the large water passages. This also means a low risk of clogging in the presence of impurities in the system water. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15) WIDE MODULATION RANGE The electronic card reduces running costs thanks to particularly high yields even with low energy absorption, as occurs for example in mid-seasons. In fact, the wide modulation range (from 12% to 100% of the thermal power) guarantees high seasonal yields DESIGNED FOR PROFESSIONALS VICTRIX kW TT, produced on the new highly automated lines in the historic Immergas headquarters in Brescello, is a specific range of products developed on the "Top Tech" platform. It has particular technical devices designed to facilitate the work of professionals such as: • safety valve discharge conveyed into the condensate discharge; • cover casing for the water connections, to better position the boiler in domestic spaces; • direct access to the electrical connection compartment of the main external devices (for example CARV2, external probe, CRONO 7) by simply removing the front aesthetic cover without having to open the product. REDUCTION OF ELECTRIC CONSUMPTION Electricity saving thanks to the low consumption modulating circulator, in class A. The circulator can be set in the operating modes: constant ∆t, proportional head or constant speed. The presence of two NTC probes on the system flow and return allows constant modulation of the boiler operating conditions based on the requests of the heating system with a consequent increase in seasonal efficiency. The electrical consumption of the boiler in stand by is less than 6 W. It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/CE) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for tools that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT. Product Guarantee The warranty on this item is 24 months from the date of purchase.  

Read more less

IMMERGAS VICTRIX 35 TT INTERNAL/EXTERNAL CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Immergas Victrix 35 TT condensing boiler Capacity: 32Kw Useful heating power kW: 32.0 DHW useful power kW: 34.2 Type: snapshot Modulation range: 12 - 100% Hot water production (∆t 30 °C) l/min: 16 , 3 Electrical protection degree IPX: 5D Dimensions (HxWxD): 748x440x255 mm Weight: 33Kg VICTRIX kW TT With VICTRIX kW TT, a generation of boilers is born, destined to offer a great variety of solutions thanks also to the extreme dimensional compactness in just 25 centimeters deep. Designed to comply with the new European Directives ErP and ELD, it makes it easier to reach the high efficiency classes in space heating and in the production of domestic hot water in homes. Approved to operate indoors and outdoors, even in the open by means of a special optional cover kit. The IPX5D degree of electrical protection and the boiler is equipped with standard antifreeze protection down to -5 °C. Electricity saving thanks to the low consumption, class A, modulating circulator. The innovative condensing module guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater resistance to corrosion thanks to the special alloy with which it is made. The modulating circulator has low consumption and the wide modulation range of the appliance from 12 to 100% of the thermal power allows high seasonal yields with a consequent reduction in gas consumption. The new electronic board allows precise control of combustion regardless of the gas used (methane/LPG or propane air) and, via a simple app, allows the management of VICTRIX kW TT also from smartphones, tablets and laptops (starting from January 2016 VICTRIX kW TT can be installed recessed with OMNI CONTAINER frame but also in SOLAR CONTAINER or DOMUS CONTAINER to create GAUDIUM SOLAR ErP or TRIO ErP systems. The built-in installation allows the boiler to be positioned outside in a niche and therefore to recover living space. With VICTRIX kW TT Immergas takes the installation flexibility of condensing boilers even further and offers a great variety of solutions also thanks to the extreme dimensional compactness in just 25 centimeters deep. All boilers can be installed: inside of; built-in with OMNI CONTAINER but also in SOLAR CONTAINER or DOMUS CONTAINER to add products that use solar thermal and heat pumps to the boiler in GAUDIUM SOLAR ErP or TRIO ErP applications outdoors in partially protected places; and today also in the open air with the dedicated cover kit. Thus the possibilities of creating systems that comply with the new European Directives increasingly oriented towards condensing technology to reduce pollution and increase energy savings increase. The eco-friendly VICTRIX kW TT condensing range expresses the best of Immergas technology, offering great performance thanks to the innovations introduced in the product design. Characteristics HIGH HYDRAULIC PERFORMANCE Primary condensing exchanger, made of an Aluminium-Silicon-Magnesium alloy, particularly resistant to corrosion. Designed to have high flow rate and head performance even on old heating systems thanks to the large water passages. This also means a low risk of clogging in the presence of impurities in the system water. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15) WIDE MODULATION RANGE The electronic card reduces running costs thanks to particularly high yields even with low energy absorption, as occurs for example in mid-seasons. In fact, the wide modulation range (from 12% to 100% of the thermal power) guarantees high seasonal yields DESIGNED FOR PROFESSIONALS VICTRIX kW TT, produced on the new highly automated lines in the historic Immergas headquarters in Brescello, is a specific range of products developed on the "Top Tech" platform. It has particular technical solutions designed to facilitate the work of professionals such as: • safety valve discharge conveyed into the condensate discharge; • cover casing for the water connections, to better position the boiler in domestic spaces; • direct access to the electrical connection compartment of the main external devices (for example CARV2, external probe, CRONO 7) by simply removing the front aesthetic cover without having to open the product. REDUCTION OF ELECTRIC CONSUMPTION Electricity saving thanks to the low consumption, class A, modulating circulator. The circulator can be set in the operating modes: constant ∆t, proportional head or constant speed. The presence of two NTC probes on the system flow and return allows constant modulation of the boiler operating conditions based on the requests of the heating system with a consequent increase in seasonal efficiency. The electrical consumption of the boiler in stand by is less than 6 W. It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/CE) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for tools that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT. Product Guarantee The warranty on this item is 24 months from the date of purchase.  

Read more less

For LPG adjustment, contact your local Authorized Assistance Centre Technical features Model : Victrix Maior 35 TT Product code : 3.024880 Maximum nominal heat input in DHW: 34.9 kW Maximum nominal heat input in heating mode: 34.9 kW Minimum nominal heat input: 3.6 kW Maximum useful thermal power in DHW: 34.2 kW Maximum useful thermal power in heating: 34.2 kW Minimum useful thermal power: 3.5 kW Useful thermal efficiency at 100% Pn (80 / 60 °C): 97.9% Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) : 103.2% Useful thermal efficiency at 100% Pn (40 / 30 °C) : 106% Useful thermal efficiency at 30% of the nominal load. (40 / 30 °C) : 108.5% Minimum gas flow rate to the burner: 0.38 m 3 /h Maximum gas flow rate to the burner: 3.70 m 3 /h Weighted CO : 19 mg/kWh Weighted NO X : 26 mg/kWh Fan available head (max/min) Intake/Exhaust: 258/116 Pa Specific flow rate in continuous domestic hot water service (∆t 30 °C): 16.3 l/min DHW circuit minimum pressure: 0.3 bar Nominal heating expansion vessel capacity: 10 litres Electrical protection degree : IPX 5D Dimensions and weight Dimensions (HxWxD): 748x440x276 mm Empty weight: 33.4 kg Immergas Victrix Maior TT Comfort, saving, Top Tech technology It is the most advanced range of the "Top Tech" platform , the best of the technology produced on the new highly automated lines in the historic Immergas headquarters in Brescello Condensing technology to improve the energy class Two instantaneous versions and one PLUS for heating only: together they form a perfect range to adapt to the new European Directives on the use of energy. For this reason, the VICTRIX MAIOR TT range is ideal for new installations and for replacing existing appliances High flow rate, low risk of clogging The condensing module is innovative: it guarantees high flow rate and head on the heating circuit , low risk of clogging due to any impurities in the system and greater resistance to corrosion thanks to the special alloy with which it is made More energy savings, more sanitary comfort The new electronic card modulates the heating power of the boiler up to 12% and together with the low consumption circulator increases energy savings. The instantaneous models are equipped with a flow regulator and DHW inlet probe to obtain high DHW comfort, 3 stars according to the EN 13203 -1 standard The advantages of the Dominus app > Intuitive navigation and simple use via the touch screen of smartphones and tablets > Remote management with direct access to the main system settings such as: Operating status Heating/DHW delivery temperature set Room temperature Receiving error messages Generator reset > Accessible and usable at any time and from anywhere > Easy installation > Encrypted security access Dominus the app that controls the boiler "on the net". VICTRIX MAIOR TT can be remote controlled from the DOMINUS app. The app is simple and intuitive, and allows you to control the boiler or view its operation with a tablet, smartphone or laptop . Using the optional Wi-Fi transmitter kit (3.026273), to be interposed with a wireless modem/router (not supplied by Immergas), it is possible to communicate from anywhere with the boiler electronic board Formula Comfort 10 It benefits from the most comprehensive maintenance program lasting 10 years with no activation costs , with the possibility of extending it up to 15 years . In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check High hydraulic performance The new condensing module has been designed to have large water passages which allow interesting flow rate and head performance even on old heating systems. This also means a low risk of clogging in the presence of impurities in the system water. It is made of a special Aluminium-Silicon-Magnesium alloy, a material which – together with the high thicknesses used – is particularly resistant to corrosion . The water circuit runs through the exchanger in an ascending manner, in counter-current with respect to the flame. The dense pinning allows you to increase the exchange surface ensuring excellent water yield. It is important to maintain the pH of the heating system fill water, between 6.5 and 8.5 with a hardness of 15°F. Class A circulator The low-consumption modulating circulator guarantees considerable savings in electricity compared to a traditional circulator, furthermore the presence of two NTC probes on the heating flow and return allow the operating conditions to be continuously modulated according to the system's requests, increasing the seasonal efficiency . The circulator can be set in the operating modes: constant ∆t, proportional head or constant speed Wide modulation range The electronic card reduces operating costs thanks to particularly high yields even with low energy absorption, as occurs for example in the mid-seasons. In fact, the wide range of modulation of the device determines high seasonal yields Low power consumption in Stand-By, less than 6 W Advanced design Immergas research and development has worked to make VICTRIX MAIOR TT particularly robust and designed to facilitate the work of professionals. In particular, it presents new technical features such as: Safety valve drain conveyed to the condensate drain Removable cover for direct access to the electrical connection compartment Carter covering the hydraulic connections, to better set the boiler inside domestic spaces Direct access to the electrical connection compartment In the lower part of the boiler there is a connection compartment accessible without the need to open the product but simply by removing the aesthetic cover, to house the electrical connections of the main external devices (e.g. CARV2, external probe, CRONO 7) Standard connection unit With the supply of the boiler, the professional will find all the fittings for the plumbing and gas installation Easy to understand and use Clear adjustment knobs and selection buttons, LCD display for viewing the operating status: everything is easily accessible through the dashboard closing hatch for simple use by anyone Heating expansion tank The theme of the capacity of the expansion vessel is deeply felt by installers in case of boiler replacement in systems with a high water content. The entire VICTRIX MAIOR TT range uses a 10 liter vessel, ideal for systems with a high water content Indoor/outdoor installation The range is approved for operation outside the home as long as it is partially protected from atmospheric agents, rain and snow, for example by installing it under a balcony; the degree of electrical protection is IPX5D. An electric resistance kit is available to increase the antifreeze protection from -5 °C to -15 °C ( 3.017324 ). It is also possible to combine the entire range with GAUDIUM SOLAR BASE V2 and GAUDIUM SOLAR PLUS BASE V2 systems Electronic air/gas control The new electronic gas valve allows air/gas control via a multifunction electrode placed inside the combustion chamber; the car electronic card adapts the combustion parameters in the event of variations in the density of the air or of the fuel. This allows you to feed VICTRIX MAIOR TT with any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example at the first commissioning by the Authorized Assistance Centre). The boiler is therefore supplied with a single product code High performance domestic hot water On the DHW circuit of the VICTRIX MAIOR TT versions there is an electronically controlled water flow regulator. The domestic hot water temperature is controlled by 2 probes. This component determines very high sanitary performance such as: maximum quantity of domestic hot water at the taps at the desired temperature and constant quantity/temperature as the inlet pressure from the aqueduct varies. To reduce waiting times for the delivery of domestic hot water, the BOOST function can be activated Combination with solar systems VICTRIX MAIOR TT can receive pre-heated water from a solar storage tank, simply by inserting a mixing valve. Thanks to the standard DHW inlet probe, the burner and the circulator will be kept off for the entire duration of the withdrawal, if the temperature of the water coming from the solar storage tank is equal to or higher than that set on the selector Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less