Scopri la nostra esclusiva selezione di Garanzia3, perfetti per arricchire la tua casa o il tuo spazio lavorativo con stile, comfort e funzionalità. Ogni pezzo è scelto per garantire la migliore qualità e soddisfare ogni tua esigenza.
TED Simplified Electronic Command The need to control hydronic terminals in a simple and effective way is fully satisfied thanks to the new series of TED electronic controls. Three different versions represent Galletti's response to the terminal's various system and motorization requirements. The main strong point is in fact the extreme versatility of the series, capable of controlling 2 or 4-pipe systems, terminals equipped with ON/OFF or BLDC motors, and always allowing installation on board the machine or on the wall.
In addition to adaptability, extreme importance has been given to ease of use: the configuration and setting of the command have been suitably designed to be extremely intuitive.
In any case, the simplicity of the command rests on solid regulation logics, guaranteed by the precision of the integrated electronic microprocessor, which, combined with the extremely advantageous positioning, make the series an advantageous alternative for regulation TED10: is the version dedicated to terminals equipped with an inverter-controlled BLDC electric motor (both for 2 and 4-pipe systems). This version, in addition to the functions of the previous versions, is equipped with an internal generator of the 0-10 V modulating signal to be sent to the inverter and allows an automatic ventilation management mode
Product Plus
Easy to use
Valve management
Measure water temperature
Wall or machine-mounted installation
Management of terminals with BLDC motor (TED10 version only)
Automatic ventilation (TED10 version only)
Three versions depending on the type of system and terminal
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA UN'AMMACCATURA E VITI NON DI SERIE SULLA PARTE POSTERIORE, AMMACCATURA SUL FONDO, GRAFFI E SEGNI DI RIPARAZIONI AL PANNELLO FRONTALE E L'IMBALLO È USURATO (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE).
VENTILCONVETTORE FAN COIL GALLETTI ESTRO F4A 2,16 kW
Modello : ESTRO F4A
Ventilconvettori per installazione in vista a parete con mobile di copertura ad uscita aria inclinata.
Dimensioni: 774 x 556 x 228 mm
Plus di prodotto:
Motore a 3/6 velocità
Ionizzatore incorporabile
Integrabile a ERGO
Certificazione Eurovent
Mobile in acciaio / ABS
Installabile in nicchia
Attacchi idraulici reversibili
Ventilatori centrifughi in ABS
(E) = Prestazioni certificate EUROVENT, organismo indipendente riconosciuto a livello europeo, che assicura una totale affidabilità e trasparenza delle prestazioni e del livello sonoro
Galletti Estro
ESTRO è la più vasta gamma di Fan Coil presente sul mercato. Nella realizzazione del progetto per i ventilconvettori ESTRO sono stati scelti materiali di alta qualità che unitamente alla grande cura e attenzione riservata all'assemblaggio dei principali componenti costruttivi, qualificano ESTRO nel campo dell'affidabilità prestazionale e comfort acustico. Il mobile di copertura è composto da un pannello in lamiera di acciaio, fiancate laterali e griglia di mandata in ABS. Uscita aria inclinata per installazione in nicchia a parete. Batteria di scambio termico ad alta efficienza, in tubo di rame ed alette in alluminio.
Ventilatori centrifughi a doppia aspirazione, realizzati in ABS antistatico con pale a profilo alare e moduli sfalsati.
Motore elettrico a 3 o 6 velocità, montato su supporti antivibranti.
Filtro aria rigenerabile facilmente estraibile per le operazioni di manutenzione.
Pannelli di comando, disponibili in accessorio.
Estro FA
Installazione in vista a parete con mobile di copertura. L'uscita dell'aria inclinata sul fronte rende la versione ESTRO FA particolarmente idonea all'inserimento in nicchia di profondità fino a 150 mm. ESTRO FA è disponibile in 19 modelli.
Ventilatore centrifugo
Supervisione ergo
Installazione verticale
Impianto 4 tubi
Impianto 2 tubi
Caratteristiche tecniche dei principali componenti:
Mobile di copertura composto da un pannello in lamiera di acciaio di forte spessore (10/10 mm); fiancate laterali e griglia di mandata (orientabili di 180°) sono realizzate in ABS. Le portelle laterali consentono l’accesso ai vani tecnici.
Uscita aria inclinata per installazione in nicchia a parete.
Struttura in lamiera di acciaio zincato di forte spessore (fino a 15/10 mm), coibentata con pannelli termoisolanti autoestinguenti di classe 1 Le versioni FU – FB – FC – FF ed FBC sono dotate di doppia bacinella per la raccolta della condensa..
Batteria di scambio termico ad alta efficienza, in tubo di rame ed alette in alluminio bloccate ai tubi mediante espansione meccanica è corredata di collettori in ottone e valvola di sfiato. La batteria, normalmente montata con attacchi a sinistra, può essere ruotata di 180°.
Motore elettrico a tre o sei velocità montato su supporti antivibranti, con condensatore permanentemente inserito e protezione termica degli avvolgimenti.
Ventilatori centrifughi a doppia aspirazione, bilanciati staticamente e dinamicamente ed accoppiati direttamente al motore elettrico, realizzati in ABS antistatico con pale a profilo alare e moduli sfalsati
Filtro aria rigenerabile in polipropilene a nido d’ape, montato su telaio in lamiera zincata con rete di protezione, facilmente estraibile per le operazioni di manutenzione. Il filtro è bloccato al mobile di copertura mediante viti ad 1/4 di giro (escluso modello 12).
Pannelli comando, disponibili in accessorio, per il controllo e regolazione della temperatura mediante sistema a microprocessore, che adegua automaticamente il funzionamento del ventilconvettore al variare delle condizioni ambiente.
Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.
Optional switch
GALLETTI ESTRO F2L FAN COIL KW 1,54 FANCOIL
Model : ESTRO F2L
Fan coils for exposed wall installation with cover cabinet with vertical air outlet
Dimensions: 774 x 564 x 226mm
Product pluses:
3/6 speed motor
Eurovent certification
Steel / ABS cabinet
Reversible hydraulic connections
Centrifugal fans in ABS
(E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level
General characteristics
Galletti Estro fan coils The widest range of fan coils on the market combined with Galletti technology, quality and reliability The ESTRO series is absolutely the line of fan coils on the market with the widest range of models and accessories capable of satisfying all the needs of professionals in the sector. The range consists of 20 models made in 9 construction versions. For the realization of the ESTRO project, high quality materials were chosen which, together with the great care and attention given to the assembly of the main components, qualify it in the field of performance reliability and acoustic comfort. The ESTRO line has a constructive concept that allows the models for vertical installation to be unified with those for horizontal installation: versions are made for surface mounting on the wall, floor/ceiling, recessed wall/ceiling, and lowered floor. In the built-in ductable version, ESTRO has a series of accessories that allow quick and economical installation with flexible ducts directly coupled to air diffusion grilles. ESTRO can be associated with a range of on-board or wall-mounted control panels made up of over 20 options depending on the level of regulation and comfort required. An innovative air ionization system guarantees the sanitization of the terminal and the deodorization of the ambient air.
Estrus FL Version with cover cabinet suitable for wall-mounted installation. Vertical air outlet, air intake filter locked to the cabinet with ¼ turn screws. ESTRO FL is available in 20 models.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
FAN COIL FAN COIL GALLETTI ESTRO F12L KW 11 kW
Model : ESTRO F12L
Fan coils for exposed wall installation with cover cabinet with vertical air outlet
Dimensions: 1614 x 564 x 251mm
Product pluses:
3/6 speed motor
Eurovent certification
Steel / ABS cabinet
Reversible hydraulic connections
Centrifugal fans in ABS
(E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level
Cockerels Estro
The widest range of fan coils on the market combined with Galletti technology, quality and reliability
The ESTRO series is absolutely the line of fan coils on the market with the widest range of models and accessories capable of satisfying all the needs of professionals in the sector. The range consists of 20 models made in 9 construction versions. For the realization of the ESTRO project, high quality materials were chosen which, together with the great care and attention given to the assembly of the main components, qualify it in the field of performance reliability and acoustic comfort. The ESTRO line has a constructive concept that allows the models for vertical installation to be unified with those for horizontal installation: versions are made for surface mounting on the wall, floor/ceiling, recessed wall/ceiling, and lowered floor. In the built-in ductable version, ESTRO has a series of accessories that allow quick and economical installation with flexible ducts directly coupled to air diffusion grilles. ESTRO can be associated with a range of on-board or wall-mounted control panels made up of over 20 options depending on the level of regulation and comfort required. An innovative air ionization system guarantees the sanitization of the terminal and the deodorization of the ambient air.
Estrus FL
Version with cover cabinet suitable for wall-mounted installation. Vertical air outlet, air intake filter locked to the cabinet with ¼ turn screws. ESTRO FL is available in 20 models.
Technical characteristics of the main components:
Rounded shapes and colors that integrate perfectly with current furnishing criteria, in compliance with architectural requirements.
Cover cabinet made up of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS. The side doors allow access to the technical compartments.
Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate.
High efficiency heat exchange coil, in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°.
Three or six-speed electric motor mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings.
Double inlet centrifugal fans, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules
Regenerable air filter in honeycomb polypropylene, mounted on a galvanized sheet frame with protection net, easily removable for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded).
Control panels, available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions vary.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
GALLETTI ESTRO F9A FAN COIL FAN COIL 4,84 kW
Model : ESTRO F9A
Fan coils for exposed wall installation with cover cabinet with inclined air outlet.
Dimensions: 1194 x 556 x 228mm
Product pluses:
3/6 speed motor
Built-in ionizer
Can be integrated with ERGO
Eurovent certification
Steel / ABS cabinet
Can be installed in niche
Reversible hydraulic connections
Centrifugal fans in ABS
(E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level
Cockerels Estro
ESTRO is the widest range of Fan Coils on the market. In carrying out the project for the ESTRO fan coils, high quality materials were chosen which, together with the great care and attention given to the assembly of the main construction components, qualify ESTRO in the field of performance reliability and acoustic comfort. The cover cabinet is made up of a sheet steel panel, side panels and delivery grille in ABS. Inclined air outlet for wall niche installation. High efficiency heat exchange coil, in copper tube and aluminum fins.
Double intake centrifugal fans, made of antistatic ABS with airfoil blades and staggered modules.
Electric motor with 3 or 6 speeds, mounted on anti-vibration supports.
Regenerable air filter that can be easily removed for maintenance operations.
Control panels, available as an accessory.
Estrus FA
Visible wall installation with cover unit. The inclined air outlet on the front makes the ESTRO FA version particularly suitable for insertion in recesses up to 150 mm deep. ESTRO FA is available in 19 models.
Centrifugal fan
Supervision ergo
Vertical installation
4-pipe system
2-pipe system
Technical characteristics of the main components:
Mobile Of coverage composed of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS . The side doors allow access to the technical compartments.
Inclined air outlet for wall niche installation.
Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate.
High efficiency heat exchange coil , in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°.
Motor electric with three or six speeds mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings.
Fans centrifuges double suction, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules
Filter air regenerable in honeycomb polypropylene, mounted on a galvanized sheet frame with a safety net, which can be easily removed for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded).
Panels control , available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions vary.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
GALLETTI ESTRO F6A FAN COIL FAN COIL 2,83 kW
Model : ESTRO F6A
Fan coils for exposed wall installation with cover cabinet with inclined air outlet.
Dimensions: 984 x 556 x 228mm
Product pluses:
3/6 speed motor
Built-in ionizer
Can be integrated with ERGO
Eurovent certification
Steel / ABS cabinet
Can be installed in niche
Reversible hydraulic connections
Centrifugal fans in ABS
(E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level
Cockerels Estro
ESTRO is the widest range of Fan Coils on the market. In carrying out the project for the ESTRO fan coils, high quality materials were chosen which, together with the great care and attention given to the assembly of the main construction components, qualify ESTRO in the field of performance reliability and acoustic comfort. The cover cabinet is made up of a sheet steel panel, side panels and delivery grille in ABS. Inclined air outlet for wall niche installation. High efficiency heat exchange coil, in copper tube and aluminum fins.
Double intake centrifugal fans, made of antistatic ABS with airfoil blades and staggered modules.
Electric motor with 3 or 6 speeds, mounted on anti-vibration supports.
Regenerable air filter that can be easily removed for maintenance operations.
Control panels, available as an accessory.
Estrus FA
Visible wall installation with cover cabinet. The inclined air outlet on the front makes the ESTRO FA version particularly suitable for insertion in recesses up to 150 mm deep. ESTRO FA is available in 19 models.
Centrifugal fan
Supervision ergo
Vertical installation
4-pipe system
2-pipe system
Technical characteristics of the main components:
Mobile Of coverage composed of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS . The side doors allow access to the technical compartments.
Inclined air outlet for wall niche installation.
Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate.
High efficiency heat exchange coil , in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°.
Motor electric with three or six speeds mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings.
Fans centrifuges double suction, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules
Filter air regenerable in honeycomb polypropylene, mounted on a galvanized sheet frame with a safety net, which can be easily removed for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded).
Panels control , available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions change.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
Optional switch
GALLETTI ESTRO F4L FAN COIL KW 2,09 FANCOIL
Technical features
Model : ESTRO F4L
Fan coils for exposed wall installation with cover cabinet with vertical air outlet
For hot air in rooms of 25 to 35 m2
Dimensions: 774 x 564 x 226mm
Product pluses:
3/6 speed motor
Eurovent certification
Steel / ABS cabinet
Reversible hydraulic connections
Centrifugal fans in ABS
(E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level
Galletti Estro fan coils
The widest range of fan coils on the market combined with Galletti technology, quality and reliability
The ESTRO series is absolutely the line of fan coils on the market with the widest range of models and accessories capable of satisfying all the needs of professionals in the sector. The range consists of 20 models made in 9 construction versions. For the realization of the ESTRO project, high quality materials were chosen which, together with the great care and attention given to the assembly of the main components, qualify it in the field of performance reliability and acoustic comfort. The ESTRO line has a constructive concept that allows the models for vertical installation to be unified with those for horizontal installation: versions are made for surface mounting on the wall, floor/ceiling, recessed wall/ceiling, and lowered floor. In the built-in ductable version, ESTRO has a series of accessories that allow quick and economical installation with flexible ducts directly coupled to air diffusion grilles. ESTRO can be associated with a range of on-board or wall-mounted control panels made up of over 20 options depending on the level of regulation and comfort required. An innovative air ionization system guarantees the sanitization of the terminal and the deodorization of the ambient air.
Estrus FL Version with cover cabinet suitable for wall-mounted installation. Vertical air outlet, air intake filter locked to the cabinet with ¼ turn screws. ESTRO FL is available in 20 models.
Technical characteristics of the main components:
Rounded shapes and colors that integrate perfectly with current furnishing criteria, in compliance with architectural requirements.
Cover cabinet made up of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS. The side doors allow access to the technical compartments.
Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate.
High efficiency heat exchange coil, in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°.
Three or six-speed electric motor mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings.
Double inlet centrifugal fans, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules
Regenerable air filter in honeycomb polypropylene, mounted on a galvanized sheet frame with protection net, easily removable for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded).
Control panels, available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions vary.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
Optional switch
GALLETTI ESTRO F3L FAN COIL KW 1,74 FANCOIL
Model : ESTRO F3L
Fan coils for exposed wall installation with cover cabinet with vertical air outlet
For warm air in rooms of 20 to 30 m2
Dimensions: 774 x 564 x 226mm
3/6 speed motor
Eurovent certification
Steel / ABS cabinet
Reversible hydraulic connections
Centrifugal fans in ABS
ESTRO is the widest range of fan coils on the market.
In the realization of the ESTRO project, high quality materials were chosen which, together with the great care and attention given to the assembly of the main construction components, qualify ESTRO in the field of performance reliability and acoustic comfort.
Cover cabinet made up of a sheet steel panel, side panels and delivery grille in ABS. High efficiency heat exchange coil, in copper tube and aluminum fins. Double intake centrifugal fans, made of antistatic ABS with airfoil blades and staggered modules. Electric motor with 3 or 6 speeds, mounted on anti-vibration supports. Regenerable air filter that can be easily removed for maintenance operations. Control panels, available as an accessory.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
GALLETTI ESTRO F4A FAN COIL FAN COIL 2,16 kW
Model : ESTRO F4A
Fan coils for exposed wall installation with cover cabinet with inclined air outlet.
Dimensions: 774 x 556 x 228mm
Product pluses:
3/6 speed motor
Built-in ionizer
Can be integrated with ERGO
Eurovent certification
Steel / ABS cabinet
Can be installed in niche
Reversible hydraulic connections
Centrifugal fans in ABS
(E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level
Cockerels Estro
ESTRO is the widest range of Fan Coils on the market. In carrying out the project for the ESTRO fan coils, high quality materials were chosen which, together with the great care and attention given to the assembly of the main construction components, qualify ESTRO in the field of performance reliability and acoustic comfort. The cover cabinet is made up of a sheet steel panel, side panels and delivery grille in ABS. Inclined air outlet for wall niche installation. High efficiency heat exchange coil, in copper tube and aluminum fins.
Double intake centrifugal fans, made of antistatic ABS with airfoil blades and staggered modules.
Electric motor with 3 or 6 speeds, mounted on anti-vibration supports.
Regenerable air filter that can be easily removed for maintenance operations.
Control panels, available as an accessory.
Estrus FA
Visible wall installation with cover unit. The inclined air outlet on the front makes the ESTRO FA version particularly suitable for insertion in recesses up to 150 mm deep. ESTRO FA is available in 19 models.
Centrifugal fan
Supervision ergo
Vertical installation
4-pipe system
2-pipe system
Technical characteristics of the main components:
Mobile Of coverage composed of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS . The side doors allow access to the technical compartments.
Inclined air outlet for wall niche installation.
Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate.
High efficiency heat exchange coil , in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°.
Motor electric with three or six speeds mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings.
Fans centrifuges double suction, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules
Filter air regenerable in honeycomb polypropylene, mounted on a galvanized sheet frame with a safety net, which can be easily removed for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded).
Panels control , available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions change.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
FAN COIL FAN COIL GALLETTI ESTRO F11L KW 8 kW
Model : ESTRO F11L
Fan coils for exposed wall installation with cover cabinet with vertical air outlet
Dimensions: 1404 x 564 x 251mm
Product pluses:
3/6 speed motor
Eurovent certification
Steel / ABS cabinet
Reversible hydraulic connections
Centrifugal fans in ABS
(E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level
Cockerels Estro
The widest range of fan coils on the market combined with Galletti technology, quality and reliability
The ESTRO series is absolutely the line of fan coils on the market with the widest range of models and accessories capable of satisfying all the needs of professionals in the sector. The range consists of 20 models made in 9 construction versions. For the realization of the ESTRO project, high quality materials were chosen which, together with the great care and attention given to the assembly of the main components, qualify it in the field of performance reliability and acoustic comfort. The ESTRO line has a constructive concept that allows the models for vertical installation to be unified with those for horizontal installation: versions are made for surface mounting on the wall, floor/ceiling, recessed wall/ceiling, and lowered floor. In the built-in ductable version, ESTRO has a series of accessories that allow quick and economical installation with flexible ducts directly coupled to air diffusion grilles. ESTRO can be associated with a range of on-board or wall-mounted control panels made up of over 20 options depending on the level of regulation and comfort required. An innovative air ionization system guarantees the sanitization of the terminal and the deodorization of the ambient air.
Estrus FL
Version with cover cabinet suitable for wall-mounted installation. Vertical air outlet, air intake filter locked to the cabinet with ¼ turn screws. ESTRO FL is available in 20 models.
Technical characteristics of the main components:
Rounded shapes and colors that integrate perfectly with current furnishing criteria, in compliance with architectural requirements.
Cover cabinet made up of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS. The side doors allow access to the technical compartments.
Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate.
High efficiency heat exchange coil, in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°.
Three or six-speed electric motor mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings.
Double inlet centrifugal fans, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules
Regenerable air filter in honeycomb polypropylene, mounted on a galvanized sheet frame with protection net, easily removable for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded).
Control panels, available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions vary.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
ATTENTION ! Remote control to be purchased separately.
Technical features
Model : ART-U20
Speed : 4.90 ~ 10.0V
Nominal Air Flow : 190 ~ 391 m 3 /h
Power Consumption: 7 ~ 17W
Global Sound Power : 39 ~ 54 dB(A)
Cooling performance
Power output in total cooling : 0.93 ~ 1.67 kW
Power output in Sensible Cooling : 0.69 ~ 1.28 kW
Energy Efficiency Class in Cooling : B
Water Flow : 161 ~ 282 l/h
pressure drop : 4 ~ 11 kPa
Warm-up performance
Power Output in Heating : 1.04 ~ 1.81 kW
Heating Energy Efficiency Class: C
Water Flow : 169 ~ 303 l/h
pressure drop : 4 ~ 12kPa
Dimensions and weight
Dimensions (HxW): 772x867x101 mm
Weight : 14Kg
Accessories
TED 10 Simplified Electronic Control (Optional)
TED 10 on-board installation kit (Optional)
Air or Water Temperature Probe for TED Commands (Optional)
Galletti fan coil ART-U Innovation driven by Design
The new ART-U is born from the great experience of Galletti in the development and design of fan coils and as confirmation of its continuous search for innovation, the result of a perfect combination between performance and design. The objective achieved by this project is absolutely ambitious: a new and unique product, not yet present on the market, which on the one hand is capable of responding to increasingly stringent requests in terms of energy efficiency, on the other meeting for the first turn the recent furniture and interior design trends.
With the new ART-U, Galletti completely hits this target, presenting a new concept of hydronic unit on the market, a product that is characterized by its enviable technical performance and at the same time represents a real stylistic shift in a sector accustomed for too long to products that are very similar to each other
ART-U, with its depth that in some points is just 10 cm, and thanks to its unique lines, was conceived to be an absolutely transversal product, which adapts perfectly both to rigorous and essential environments, and to more warm and sophisticated. Thanks also to the possibility of customizing the front panel, ART-U satisfies the request for ever greater customization of the spaces to be furnished
The achievement of very high aesthetic standards has not weakened the usual constructive virtuosity of Galletti products: the search for innovation has in fact also concentrated on the components and on the use of new materials. With ART-U the state of the art has been redefined also in terms of technical performance, thanks to the use of computational fluid dynamics simulations for the optimization of the heat exchange inside the terminal combined with the use of permanent magnet electric motors
Designer furniture
The elegant front panel is made up of two aluminum sheets with a polyethylene core and optional polyester-based surface painting. It is a light but very resistant material, created for facade cladding in the building sector. The side panels are in UV stabilized ABS to keep the color unchanged over time. The polyethylene core acts as a flexible filling and thermal insulator while the aluminum gives structurality and aesthetics
Conveyors
In high density polystyrene. They are designed to optimize the aeraulic flow inside the hydronic terminal allowing an optimal distribution of the air flow in the coil and low noise at any operating regime
Upper grille
Consisting of adjustable fins in anodized aluminum, available in the version for on-board or wall-mounted control. The ABS combs, supporting the grids, prevent them from bending, always guaranteeing the user's safety
Electric motor
Permanent magnet BLDC motor with inverter integrated in the fan assembly. The IP54 degree of protection is guaranteed, therefore the access of dust to the inside is prevented and resistance to water splashes is guaranteed
Tangential fan
Tangential fan statically and dynamically balanced to reduce operating noise. The plastic material used for the blades guarantees, compared to metal fans, a reduction of vibrations and absence of bending along the axis of rotation. The blades are interspersed with intermediate reinforcement disks in order to increase their strength
Heat exchange coils
High efficiency turbulent in copper tube and aluminum fins, it is equipped with brass manifolds and vent valve. The hydrophilic treatment is applied as standard on the fins, to increase their effectiveness in cooling and at the same time greater resistance to aggressive atmospheres. The hydraulic connections are reversible during installation. On request, it is possible to mount an additional coil for 4-pipe systems
Air filter
Regenerable filter made of honeycomb polypropylene, easily removable for maintenance operations
Computational fluid dynamics simulations
Model
Computational fluid dynamics (CFD) is a method that uses numerical analysis to solve fluid dynamics problems using computers. For the ART-U project, a computational domain discretized by means of a polyhedral computational grid (mesh) consisting of 12 million cells was considered. The mesh has a refinement extended to the entire rotor area to best reproduce the vortices that are created in this area
Air motion field
During the initial development phase of the ART-U project, the calculation showed recirculation of the fluid downstream of the rotor in different areas, with consequent pressure drops
Flow lines
The flow lines show how the trajectory of the fluid streams inside the unit does not have a uniform distribution. For this reason, the research also focused on the improvement of air distribution along the longitudinal axis of the fan, minimizing wall effects. The results of these simulations have allowed an optimization of the geometry of the internal conveyor and of the orientation of the finned pack coil
Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
GALLETTI ESTRO F7L FAN COIL KW 3,51 FANCOIL
Model : ESTRO F7L
Fan coils for exposed wall installation with cover cabinet with vertical air outlet
Dimensions: 1194 x 564 x 226mm
Product pluses:
3/6 speed motor
Eurovent certification
Steel / ABS cabinet
Reversible hydraulic connections
Centrifugal fans in ABS
(E) = EUROVENT certified performance, an independent body recognized at European level, which ensures total reliability and transparency of performance and sound level
Cockerels Estro
The widest range of fan coils on the market combined with Galletti technology, quality and reliability
The ESTRO series is absolutely the line of fan coils on the market with the widest range of models and accessories capable of satisfying all the needs of professionals in the sector. The range consists of 20 models made in 9 construction versions. For the realization of the ESTRO project, high quality materials were chosen which, together with the great care and attention given to the assembly of the main components, qualify it in the field of performance reliability and acoustic comfort. The ESTRO line has a constructive concept that allows the models for vertical installation to be unified with those for horizontal installation: versions are made for surface mounting on the wall, floor/ceiling, recessed wall/ceiling, and lowered floor. In the built-in ductable version, ESTRO has a series of accessories that allow quick and economical installation with flexible ducts directly coupled to air diffusion grilles. ESTRO can be associated with a range of on-board or wall-mounted control panels made up of over 20 options depending on the level of regulation and comfort required. An innovative air ionization system guarantees the sanitization of the terminal and the deodorization of the ambient air.
Estrus FL
Version with cover cabinet suitable for wall-mounted installation. Vertical air outlet, air intake filter locked to the cabinet with ¼ turn screws. ESTRO FL is available in 20 models.
Technical characteristics of the main components:
Rounded shapes and colors that integrate perfectly with current furnishing criteria, in compliance with architectural requirements.
Cover cabinet made up of a thick steel sheet panel (10/10 mm); side panels and delivery grille (adjustable by 180°) are made of ABS. The side doors allow access to the technical compartments.
Structure in thick galvanized steel sheet (up to 15/10 mm), insulated with class 1 self-extinguishing thermal insulating panels. The FU – FB – FC – FF and FBC versions are equipped with a double tray for collecting the condensate.
High efficiency heat exchange coil, in copper pipe and aluminum fins locked to the pipes by mechanical expansion, it is equipped with brass manifolds and vent valve. The battery, normally mounted with connections on the left, can be rotated by 180°.
Three or six-speed electric motor mounted on anti-vibration supports, with permanently inserted capacitor and thermal protection of the windings.
Double inlet centrifugal fans, statically and dynamically balanced and coupled directly to the electric motor, made of antistatic ABS with airfoil blades and staggered modules
Regenerable air filter in honeycomb polypropylene, mounted on a galvanized sheet frame with protection net, easily removable for maintenance operations. The filter is locked to the cover cabinet by means of 1/4 turn screws (model 12 excluded).
Control panels, available as an accessory, for controlling and regulating the temperature by means of a microprocessor system, which automatically adjusts the operation of the fan coil as the ambient conditions vary.
Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
