Technical features Dimensions External Diameter: 22 mm Thickness : 1mm Roll length : 25m Minimum Coating Thickness: 1.5 mm Burst Pressure: 19.01 MPa Working Pressure : 4.75 MPa Water Content: 0.31 l/m Foma Plast Coated Pipes for Sanitary Uses PLAST coated copper pipe is produced using the most modern drawing technologies; the in-line control on 100% of the production and the constant verification of the dimensional characteristics guarantee maximum safety. This guarantee of quality allows us to supply the copper tube in accordance with the specific requests of the customer, according to various standardized regulations and, if required, according to the European standard CE EN 1057. The same care and attention are employed in the choice of materials and in the coating production processes ensuring maximum protection from attacks exerted by the materials used for the construction We also recall that copper is a metal whose chemical-physical characteristics are essential for energy saving and is also applied in green building Characteristics of the Copper Pipe Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: upon specific request by the customer according to various standardized regulations or, if required, according to the European standard CE EN 1057. Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220 according to EN 1057 standard) Excellent corrosion resistance Made according to the prescriptions of the DPR n. 1095/68 Usage Water and sanitation systems Compressed air systems Non-buried gas systems Coating characteristics Stellar PVC coating PVC coating with a special "star" sheath Ivory Coating Thickness: 1.5mm approx. Fire resistance: self-extinguishing Marking: lasered every metre Odorless and non-toxic Excellent plasticity and abrasion resistance Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Dimensions Outer Diameter : 6,35mm (1/4") - 9,52mm (3/8") - 12,70mm (1/2) Thickness : 0.8mm Roll length : 50m De : Outside diameter Sp : Thickness Minimum Coating Thickness Minimum Coating Thickness 1/4 : 7 mm Minimum Coating Thickness 3/8 : 7 mm Minimum Coating Thickness 1/2 : 9 mm Burst Pressure Burst Pressure 1/4 : 53.71 MPa Burst Pressure 3/8 : 35.67 MPa Burst Pressure 1/2 : 28.62 MPa Operating pressure Working Pressure 1/4 : 13.42 MPa Working Pressure 3/8 : 8.95 MPa Working Pressure 1/2 : 7.15 MPa Water content Water Content 1/4 : 0.018 l/m Water Content 3/8 : 0.049 l/m Water Content 1/2 : 0.097 l/m FOMA Coated Copper Pipes for Air Conditioning and Refrigeration CUPRUMFOMA FROSTEN copper pipe can be used in air conditioning and refrigeration systems and is suitable for the use of all copper-compatible refrigerant gases such as R 407, R 410A and R32. The control in the production line by means of a defectomat and the constant control of the external diameter and the thickness guarantee the maximum safety of the FROSTEN pipe. The pipes are supplied clean, internally degreased and closed at the ends. They are manufactured in accordance with EN 12735-1 and -2 and also meet ASTM B280 standards Characteristics of the copper tube Alloy: Copper Cu-DHP 99.90 min Dimensions and tolerances: according to the UNI EN 12735-1 standard Physical state: annealed (R220) Total residue: < 38 mg/m² Glossy and specular internal surface Excellent corrosion resistance Suitable for R 407 C and R 410 A GAS Use Air conditioning and refrigeration systems Heat pump systems Coating Features Expanded polyethylene (PE) lining Made according to the prescriptions of Law 10/91 White color Insulation thickness : about 7-9 mm Fire resistance: Self-extinguishing CL. 1 Marking: Lasered every metre Odorless and non-toxic without the use of CFCs Thermal conductivity at 40° C = < 0.040 W/m. k Average density: approx. 30 kg/m3 Operating temperature: - 70° C + 110° C Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Dimensions External Diameter: 18 mm Thickness : 1mm Roll length : 50m Minimum Coating Thickness: 1.5 mm Burst Pressure: 23.23 MPa Working Pressure : 5.81 MPa Water Content: 0.2 l/m Foma Plast Coated Pipes for Sanitary Uses PLAST coated copper pipe is produced using the most modern drawing technologies; the in-line control on 100% of the production and the constant verification of the dimensional characteristics guarantee maximum safety. This guarantee of quality allows us to supply the copper tube in accordance with the specific requests of the customer, according to various standardized regulations and, if required, according to the European standard CE EN 1057. The same care and attention are employed in the choice of materials and in the coating production processes ensuring maximum protection from attacks exerted by the materials used for the construction We also recall that copper is a metal whose chemical-physical characteristics are essential for energy saving and is also applied in green building Characteristics of the Copper Pipe Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: upon specific request by the customer according to various standardized regulations or, if required, according to the European standard CE EN 1057. Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220 according to EN 1057 standard) Excellent corrosion resistance Made according to the prescriptions of the DPR n. 1095/68 Usage Water and sanitation systems Compressed air systems Non-buried gas systems Coating characteristics Stellar PVC coating PVC coating with a special "star" sheath Ivory Coating Thickness: 1.5mm approx. Fire resistance: self-extinguishing Marking: lasered every metre Odorless and non-toxic Excellent plasticity and abrasion resistance Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical Features Dimensions External Diameter: 12 mm Thickness: 1mm Dimensions Outer Diameter of Tube : 24 mm Roll Length: 50m Burst Pressure : 34.85MPa Working Pressure : 8.71MPa Water content: 0.0785 l/m Foma Special Gas Copper Pipes Coated Plumbing and Heating for Gas This special pre-sheathed copper tube, created for the distribution of liquid and gaseous fuels, is particularly suitable for insertion into wall structures, where the use of plastic sheaths is necessary. The advantage of using this product is made clear by the type of structure with which this sheath is made, being a high density closed cell expanded polyethylene with seven spacers, which, during the production phase, are twisted to make them a spiral; this allows the tube to be bent without the sheath channels being interrupted, thus facilitating the evacuation of any leaks. The copper tube contained is produced according to the customer's requests, according to various standardized regulations or, if requested, according to the European regulation CE EN 1057 and the dimensional range complies with the provisions of UNI CIG 7129, which at point 3.3.1.4 prescribes, for the crossing of solid walls, perforated walls and prefabricated panels, that the tube be protected, without joints and welds, with a passing sheath walled in with mortar and cement. Characteristics of Copper Tube Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: as specifically requested by the customer according to various standardized regulations or, if required, according to the European regulation CE EN 1057. Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220 according to EN 1057) Excellent corrosion resistance Jobs Liquid and gaseous fuels GAS systems for domestic use Coating Features High density closed cell polyethylene coating Complies with EEC/EU regulation 2037/2000 for environmental protection Color: YELLOW Helically wound spacers Air gap: 5 mm minimum Fire resistance: Self-extinguishing Class 1 Excellent resistance to atmospheric agents Marking: Ink Odorless and non-toxic Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less

Technical Features Dimensions External Diameter: 14 mm Thickness: 1mm Roll Length: 50m Minimum Coating Thickness: 1.5mm Burst Pressure : 29.87MPa Working Pressure : 7.47MPa Water content: 0.11 l/m Foma Plast Coated Pipes for Sanitary Uses The PLAST coated copper tube is produced using the most modern wire drawing technologies; the in-line control on 100% of the production and the constant verification of the dimensional characteristics guarantee maximum safety. This quality guarantee allows us to supply the copper tube in accordance with the specifications requested by the customer, according to various standardized regulations and, if requested, according to the European regulation CE EN 1057. The same care and attention are used in the choice of materials and in the production processes of the coating, guaranteeing maximum protection from attacks exerted by the materials used for the construction. We also remember that copper is a metal whose chemical-physical characteristics are essential for energy saving and is also used in green building. Characteristics of Copper Tube Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: as specifically requested by the customer according to various standardized regulations or, if required, according to the European regulation CE EN 1057. Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220 according to EN 1057) Excellent corrosion resistance Made according to the requirements of Presidential Decree no. 1095/68 Usage Water and sanitary systems Compressed air systems Gas systems above ground Coating Features PVC stellar coating PVC coating with a special "star" sheath Color: IVORY Coating thickness: approx. 1.5 mm. Fire resistance: self-extinguishing Marking: laser every meter Odorless and non-toxic Excellent plasticity and resistance to abrasion Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Dimensions Outer Diameter : 6,35mm (1/4") - 9,52mm (3/8") - 12,70mm (1/2) Thickness : 1.0mm Roll length : 50m De : Outside diameter Sp : Thickness FOMA Coated Copper Pipes for Air Conditioning and Refrigeration CUPRUMFOMA FROSTEN copper pipe can be used in air conditioning and refrigeration systems and is suitable for the use of all copper-compatible refrigerant gases such as R 407, R 410A and R32. The control in the production line by means of a defectomat and the constant control of the external diameter and the thickness guarantee the maximum safety of the FROSTEN pipe. The pipes are supplied clean, internally degreased and closed at the ends. They are manufactured in accordance with EN 12735-1 and -2 and also meet ASTM B280 standards Characteristics of the copper tube Alloy: Copper Cu-DHP 99.90 min Dimensions and tolerances: according to the UNI EN 12735-1 standard Physical state: annealed (R220) Total residue: < 38 mg/m² Glossy and specular internal surface Excellent corrosion resistance Suitable for R 407 C and R 410 A GAS Use Air conditioning and refrigeration systems Heat pump systems Coating Features Expanded polyethylene (PE) lining Made according to the prescriptions of Law 10/91 White color Insulation thickness : about 7-9 mm Fire resistance: Self-extinguishing CL. 1 Marking: Lasered every metre Odorless and non-toxic without the use of CFCs Thermal conductivity at 40° C = < 0.040 W/m. k Average density: approx. 30 kg/m3 Operating temperature: - 70° C + 110° C Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Dimensions External Diameter: 16 mm Thickness : 1mm Dimensions Outside Diameter of the Tube: 28 mm Roll length : 50m Burst Pressure: 26.14 MPa Working Pressure : 6.54 MPa Water Content: 0.1539 l/m Foma Special Gas Coated Copper Pipes for Gas Plumbing This special pre-sheathed copper pipe, created for the distribution of liquid and gaseous fuels, is particularly suitable for insertion into masonry structures, where it is necessary to use sheaths of plastic material. The advantage of using this product is made evident by the type of structure with which this sheath is made, since it is high-density closed-cell expanded polyethylene with seven spacers, which, during the production phase, are given a twist so as to make them a spiral; this allows the pipe to be bent without the sheath channels being interrupted, thus facilitating the evacuation of any leaks. The copper pipe contained is produced according to the customer's requests, according to various standardized regulations or, if required, according to the European standard CE EN 1057 and the dimensional range complies with the provisions of UNI CIG 7129, which in point 3.3.1.4 prescribes , for the crossing of solid walls, perforated and prefabricated panels, that the pipe is protected, without joints and welds, with a through sheath walled up with mortar and cement. Characteristics of the Copper Pipe Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: upon specific request by the customer according to various standardized regulations or, if required, according to the European standard CE EN 1057. Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220 according to EN 1057 standard) Excellent corrosion resistance Jobs Liquid and gaseous fuels GAS systems for domestic use Coating characteristics Coating in high density closed cell polyethylene Complies with EEC/EU 2037/2000 regulation for environmental protection Yellow color Helically wound spacers Air gap: 5mm. minimum Fire resistance: Class 1 self-extinguishing Excellent resistance to atmospheric agents Marking: in ink Odorless and non-toxic Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Dimensions External Diameter: 16 mm Thickness : 1mm Roll length : 50m Minimum Coating Thickness: 1.5 mm Burst Pressure: 26.14 MPa Working Pressure : 6.54 MPa Water Content: 0.1539 l/m Foma Plast Gas Coated Copper Pipes for Gas Plumbing PLAST insulated copper pipe is produced using the most modern drawing technologies; the in-line control on 100% of the production and the constant verification of the dimensional characteristics guarantee maximum safety. This guarantee of quality allows us to supply the copper tube in accordance with the specifications requested by the customer, according to various standardized regulations or, if required, according to the European standard CE EN 1057. The same care and attention are employed in the choice of materials and in the coating production processes ensuring maximum protection from attacks exerted by the materials used for the construction. We also recall that copper is a metal whose chemical-physical characteristics are essential for energy saving and is also applied in green building Characteristics of the Copper Pipe Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: upon specific request by the customer according to various standardized regulations or, if required, according to the European standard CE EN 1057. according to the standard EN 1057 Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220) Excellent corrosion resistance Made according to the prescriptions of the DPR n. 1095/68 Jobs Domestic use gas systems (UNI CIG 7129) Liquid fuel distribution systems (UNI CIG 7129) Water and sanitation systems Compressed air systems Coating characteristics PVC coating with smooth sheath adhering to the pipe made according to the UNI 10823 standard Yellow color Coating Thickness: 1.5mm approx. Fire resistance: self-extinguishing Marking: lasered every metre Odorless and non-toxic Excellent plasticity and abrasion resistance Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Dimensions External Diameter: 12 mm Thickness : 1mm Roll length : 50m Minimum Coating Thickness: 1.5 mm Burst Pressure: 41.82 MPa Working Pressure : 10.46 MPa Water Content: 0.0503 l/m Foma Plast Gas Coated Copper Pipes for Gas Plumbing PLAST insulated copper pipe is produced using the most modern drawing technologies; the in-line control on 100% of the production and the constant verification of the dimensional characteristics guarantee maximum safety. This guarantee of quality allows us to supply the copper tube in accordance with the specifications requested by the customer, according to various standardized regulations or, if required, according to the European standard CE EN 1057. The same care and attention are employed in the choice of materials and in the coating production processes ensuring maximum protection from attacks exerted by the materials used for the construction. We also recall that copper is a metal whose chemical-physical characteristics are essential for energy saving and is also applied in green building Characteristics of the Copper Pipe Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: upon specific request by the customer according to various standardized regulations or, if required, according to the European standard CE EN 1057. according to the standard EN 1057 Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220) Excellent corrosion resistance Made according to the prescriptions of the DPR n. 1095/68 Jobs Domestic use gas systems (UNI CIG 7129) Liquid fuel distribution systems (UNI CIG 7129) Water and sanitation systems Compressed air systems Coating characteristics PVC coating with smooth sheath adhering to the pipe made according to the UNI 10823 standard Yellow color Coating Thickness: 1.5mm approx. Fire resistance: self-extinguishing Marking: lasered every metre Odorless and non-toxic Excellent plasticity and abrasion resistance Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Dimensions External Diameter: 14 mm Thickness : 1mm Dimensions Outside Diameter of the Tube: 26 mm Roll length : 50m Burst Pressure: 29.87 MPa Working Pressure : 7.47 MPa Water Content: 0.1131 l/m Foma Special Gas Coated Copper Pipes for Gas Plumbing This special pre-sheathed copper pipe, created for the distribution of liquid and gaseous fuels, is particularly suitable for insertion into masonry structures, where it is necessary to use sheaths of plastic material. The advantage of using this product is made evident by the type of structure with which this sheath is made, since it is high-density closed-cell expanded polyethylene with seven spacers, which, during the production phase, are given a twist so as to make them a spiral; this allows the pipe to be bent without the sheath channels being interrupted, thus facilitating the evacuation of any leaks. The copper pipe contained is produced according to the customer's requests, according to various standardized regulations or, if required, according to the European standard CE EN 1057 and the dimensional range complies with the provisions of UNI CIG 7129, which in point 3.3.1.4 prescribes , for the crossing of solid walls, perforated and prefabricated panels, that the pipe is protected, without joints and welds, with a through sheath walled up with mortar and cement. Characteristics of the Copper Pipe Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: upon specific request by the customer according to various standardized regulations or, if required, according to the European standard CE EN 1057. Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220 according to EN 1057 standard) Excellent corrosion resistance Jobs Liquid and gaseous fuels GAS systems for domestic use Coating characteristics Coating in high density closed cell polyethylene Complies with EEC/EU 2037/2000 regulation for environmental protection Yellow color Helically wound spacers Air gap: 5mm. minimum Fire resistance: Class 1 self-extinguishing Excellent resistance to atmospheric agents Marking: in ink Odorless and non-toxic Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Dimensions External Diameter: 18 mm Thickness : 1mm External diameter dimensions of the tube: 30 mm Roll length : 50m Burst Pressure: 23.23 MPa Working Pressure : 5.81 MPa Water Content: 0.2011 l/m Foma Special Gas Coated Copper Pipes for Gas Plumbing This special pre-sheathed copper pipe, created for the distribution of liquid and gaseous fuels, is particularly suitable for insertion into masonry structures, where it is necessary to use sheaths of plastic material. The advantage of using this product is made evident by the type of structure with which this sheath is made, since it is high-density closed-cell expanded polyethylene with seven spacers, which, during the production phase, are given a twist so as to make them a spiral; this allows the pipe to be bent without the sheath channels being interrupted, thus facilitating the evacuation of any leaks. The copper pipe contained is produced according to the customer's requests, according to various standardized regulations or, if required, according to the European standard CE EN 1057 and the dimensional range complies with the provisions of UNI CIG 7129, which in point 3.3.1.4 prescribes , for the crossing of solid walls, perforated and prefabricated panels, that the pipe is protected, without joints and welds, with a through sheath walled up with mortar and cement. Characteristics of the Copper Pipe Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: upon specific request by the customer according to various standardized regulations or, if required, according to the European standard CE EN 1057. Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220 according to EN 1057 standard) Excellent corrosion resistance Jobs Liquid and gaseous fuels GAS systems for domestic use Coating characteristics Coating in high density closed cell polyethylene Complies with EEC/EU 2037/2000 regulation for environmental protection Yellow color Helically wound spacers Air gap: 5mm. minimum Fire resistance: Class 1 self-extinguishing Excellent resistance to atmospheric agents Marking: in ink Odorless and non-toxic Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Dimensions External Diameter: 22 mm Thickness : 1mm Dimensions Outside Diameter of the Tube: 34 mm Roll length : 25 m Burst Pressure: 28.51 MPa Working Pressure : 7.13 MPa Water Content: 0.2835 l/m Foma Special Gas Coated Copper Pipes for Gas Plumbing This special pre-sheathed copper pipe, created for the distribution of liquid and gaseous fuels, is particularly suitable for insertion into masonry structures, where it is necessary to use sheaths of plastic material. The advantage of using this product is made evident by the type of structure with which this sheath is made, since it is high-density closed-cell expanded polyethylene with seven spacers, which, during the production phase, are given a twist so as to make them a spiral; this allows the pipe to be bent without the sheath channels being interrupted, thus facilitating the evacuation of any leaks. The copper pipe contained is produced according to the customer's requests, according to various standardized regulations or, if required, according to the European standard CE EN 1057 and the dimensional range complies with the provisions of UNI CIG 7129, which in point 3.3.1.4 prescribes , for the crossing of solid walls, perforated and prefabricated panels, that the pipe is protected, without joints and welds, with a through sheath walled up with mortar and cement. Characteristics of the Copper Pipe Alloy: Copper Cu-DHP 99.90 min. Dimensions and tolerances: upon specific request by the customer according to various standardized regulations or, if required, according to the European standard CE EN 1057. Carbon residue: < 0.20 mg / dm² Physical state: Annealed (R 220 according to EN 1057 standard) Excellent corrosion resistance Jobs Liquid and gaseous fuels GAS systems for domestic use Coating characteristics Coating in high density closed cell polyethylene Complies with EEC/EU 2037/2000 regulation for environmental protection Yellow color Helically wound spacers Air gap: 5mm. minimum Fire resistance: Class 1 self-extinguishing Excellent resistance to atmospheric agents Marking: in ink Odorless and non-toxic Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less