Technical features Model : Calypso Smart 80 SVE Code : E30027KA Tank capacity: 78 litres Electric Power: 1200 W Load profile : M ERP class : B Heating time (20+55°C) : 3h - 7 minutes Warranty : 2 Years Dimensions and weight : Height : 755mm Diameter : 438mm Weight : 19Kg Calypso Smart Medium Liter Electric Water Heaters Electric storage water heaters with very high efficiency, vertical and horizontal development with capacities from 50 to 150 litres. Endowed of : Electronic control of the '' SMART '' type able to optimize consumption according to the user's needs Control panel with luminous LEDs for reading the operating temperatures and operating status and convenient buttons for managing the water heater Magnesium anode to protect the tank 5-bolt flange to ensure sturdiness and facilitate periodic maintenance Safety valve set at 8 bar Supplied with three-pole electric cable without plug Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FERROLI Galvanized casing kit for Bluehelix Pro S boiler Also for outdoors in a partially protected place up to -10°C/-15°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Tank capacity: 15 litres Energy Class: B Load profile : XXS Type of Installation : Countertop Warranty : 2 Years Performance Electric Power: 1500 W Absorption : 2.781 kWh Operating pressure : 8 bar Power supply: 220/40V - 50Hz Water Heating Energy Efficiency: 32% η wh Annual Electricity Consumption AEC : 576 kWh Sound Power Level : 15 dB(A) Heating Time (20+55°C) : 35 Minutes Degree of Protection : 24 IP Empty weight: 7.8 kg Dimensions BRAVO Water Heaters Small and Efficient Bravo electric water heaters are simple to install and use. It is ideal for domestic use for small hot water needs (kitchen, shower), it is available in 5 models with 10/15/30 liter capacities. Equip yourself with : Electrical resistances in stainless steel Porcelain glass kettle Magnesium anode to protect the boiler External temperature regulator with LED power indication Outer casing in abs Capillary thermostat for temperature control Characteristics : Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Tank capacity: 15 litres Energy Class: C Load profile : XXS Type of installation : Under sink Warranty : 2 Years Performance Electric Power: 1500 W Absorption : 2.781 kWh Operating pressure : 8 bar Power supply: 220/40V - 50Hz Water Heating Energy Efficiency: 32% η wh Annual Electricity Consumption AEC : 576 kWh Sound Power Level : 15 dB(A) Heating Time (20+55°C) : 35 Minutes Degree of Protection : 24 IP Empty weight: 7.8 kg Dimensions BRAVO Water Heaters Small and Efficient Bravo electric water heaters are simple to install and use. It is ideal for domestic use for small hot water needs (kitchen, shower), it is available in 5 models with 10/15/30 liter capacities. Equip yourself with : Electrical resistances in stainless steel Porcelain glass kettle Magnesium anode to protect the boiler External temperature regulator with LED power indication Outer casing in abs Capillary thermostat for temperature control Characteristics : Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Ferroli SKY ECO 14F Low NOx gas water heater complete with LPG fume kit - NEW ERP Class (Class G - A) A XL load profile Nominal heat input Max kW 26.9 Thermal power Max / Min kW 24.2 / 9.37 Maximum working pressure 10 bar Maximum sanitary production Δt 25°C / Δt 30°C l/min 13.9 / 11.6 Power supply V/Hz 230 / 50 Dimensions HxL 595x335 mm New Ferroli ECO range EFFECTIVE The ECO range has been designed according to the stringent efficiency parameters of the European ErP Directive. In practice, they are able to produce a lot of hot water at a low cost, respecting the environment and with minimal polluting emissions. They can also be integrated into a solar thermal system with extreme simplicity for maximum efficiency and comfort. EASY ECO water heaters are extremely simple to install and are interchangeable with previous series. Although very compact in size, they have been designed and built in such a way as to have easy access to the internal components for easy maintenance. BEAUTIFUL AND SMART The designers of the ECO project have created a «friendly» aesthetic that can be easily integrated with the most diverse furnishing styles. The knob or button controls have been designed to be easy to use and immediately understood. All Ferroli gas water heaters are equipped with a user interface display. Sky ECO F Sealed chamber gas water heater, with modulating thermal power and electronic control of the. Combustion. LOW NOx fume emission and SUN EASY system for direct coupling to a solar thermal system SUN EASY Easy... Cheap... Brilliant The SKY ECO range has been designed to be easily integrated with thermal solar systems, with natural or forced circulation. The temperature of the water coming from the solar circuit is constantly monitored and the water heater burner is turned on only if it is not hot enough. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. The heart of water heaters All ECO series water heaters comply with the very strict restrictions on the emission of fumes into the atmosphere, imposed by European regulations. The burners in the ECO range use a particular technology which consists in keeping the flame temperature very low, keeping the gas trains wet. This expedient makes it possible to go well below the limits imposed by the ErP directive which sets the NOx limit at the threshold of 56 mg/kWh. Copper exchanger Interface displays Continuous power modulation - Available for operation with Natural Gas, LPG and Propane Air (50% air - 50% G31 by means of a specific transformation to be requested from the authorized assistance center at the maximum total price of 30 euros + VAT) Solar systems Also outdoor installation in protected places Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance Ferroli condensing boiler Bluehelix Alpha 28C complete with methane or LPG fume exhaust kit cod. 0TPF4AWA Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max / min heat input (Hs) kW 27.2 / 5.3 Max DHW heat input (Hi) kW 28.5 Max working pressure heating bar 3 Min. heating operating pressure bar 0.8 Heating expansion vessel capacity 8 litres Max DHW working pressure bar 9 Minimum DHW operating pressure bar 0.3 Sanitary flow rate ∆t 25°C l/min 14 Protection degree (IEC 60529) IP IPX4D Supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x250 Bluehelix Alpha .. More beautiful than "BEFORE" The new range of generators is equipped with the tested heat exchanger in stainless steel . Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX ALPHA is at the top of its category. TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) mod. 24 C COMBINED (14 l/min at ∆t 25°C) The BLUEHELIX ALPHA thermal group exchanger (fig. A) compared with the more classic and widespread steel exchanger. This geometry allows the exchanger to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig. B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values BLUEHELIX ALPHA FROM THE INSIDE EXCHANGER High flow single circuit stainless steel exchanger, resistant to clogging and easy to clean STEEL FRAME Made with high precision automated processes EXPANSION TANK 8 liter expansion tank placed on the side ELECTRIC PANEL FAN Offset fan, to facilitate maintenance of the primary exchanger without disassembly DOMESTIC HOT WATER EXCHANGER In stainless steel, with copper brazing CIRCULATOR High efficiency, for heating and exchange with the DHW circuit SEALED CHAMBER Removable steel panel to protect the combustion chamber with the function of a sealed chamber ELECTRICAL PANEL Large removable electrical panel to protect against water damage that may occur during normal maintenance. Easy access to electrical connectors. THE ENGINE The tube that makes up the BLUEHELIX ALPHA exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and deposits. THE BOILER CONTROL The control box of BLUEHELIX ALPHA consists of an easy to use interface with backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. MC2 The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). MGR Methane, LPG, Propane Ready Air The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Thanks to the new electronics supplied, the gas change operation is extremely simple. The MC2 combustion control performs constant monitoring of the quality of the combustion and by simply modifying a parameter on the electronic card (operation to be carried out only by qualified personnel) it is possible to operate the boiler on Natural Gas or LPG or Propane Air. It is therefore not necessary to purchase additional accessory kits. CONNECT New wireless remote control available as an accessory for home comfort management also from a smartphone using the connect app (iOS and Android). Maximizes room comfort with delivery temperature modulation through the Room Climatic Compensation (CCA) and External Climatic Compensation (CCE) functions via the external temperature detectable directly from the internet (or from an optional external probe). It improves the average seasonal efficiency in space heating by +4%. EASY MAINTENANCE Problem-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the BLUEHELIX ALPHA thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: - The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - Easy access to the burner unit by removing 4 screws and the quick coupling (clip) of the fan. - The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. - The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. - Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front SUN EASY FUNCTION BLUEHELIX ALPHA has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. By means of a sensor located on the DHW circuit, it continuously controls the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter drops below the level necessary to guarantee optimal comfort for the user. STOP AND GO FUNCTION With the use of sanitary mixing taps, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these "false starts" can, in the long run, compromise the average life of the product. For this reason BLUEHELIX ALPHA provides an electronic parameter through which it is possible to delay burner ignition (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water. OUTDOOR INSTALLATION - ANTIFREEZE FUNCTION To make the most of the available space, the new BLUEHELIX ALPHA 24 - 28 C boiler can be installed recessed into the wall thanks to the special kit; for more critical installations, in completely uncovered places not protected from atmospheric agents, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. SANITARY ECO-COMFORT FUNCTION In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. The efficiency and the load profiles according to the ErP directive are at the top of the category: mod. 24 C / A - XL. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION THE BOILER CAN OPERATE WITH METHANE. LPG AND PROPANE AIR WITHOUT THE USE OF ADDITIONAL CONVERSION KITS. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ferroli Bluehelix Maxima 34C condensing boiler complete with Wi-Fi flue gas exhaust kit Optional Class A Methane or LPG low NOx - NEW 0TSB7MWA Energy label specifications according to the European ErP directive Heating energy efficiency Class A+ (in combination with the connect command) Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Max heating heat input (Hs) kW 30.6 Max DHW heat input (Hi) kW 34.7 Efficiency 30% % 109.5 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 10 litres Sanitary flow rate ∆t 25°C l/min 19.5 IP X4D protection degree Supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x320 Methane or LPG MGR: Methane, LPG, Propane air Ready. The boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits Bluehelix Maxima - Functionality at its maximum expression The exclusive lines of BLUEHELIX MAXIMA radically innovate the aesthetic concept proposed so far through the use of crystal and the revolutionary use of curved shapes. A multicolored LED environment , set in a central position, allows you to perceive the status and operating modes of the boiler, even on a chromatic level. The large 7'' full color touch screen display integrated in the front surface of black tempered glass allows the user to interact in a totally smart way with the product thanks also to the combination with the smart CONNECT remote control manageable from iOS and Android apps . Conceived to fully satisfy the requests for a "robust" product from every point of view: primary heat exchanger with high passages, secondary domestic heat exchanger enhanced with 20 plates, high head circulator, new control electronics. All these elements are designed to ensure maximum efficiency and reliability over time also, and not only, to replace old generators in particularly dirty systems: ideal for "carefree" replacement MAXIMUM SILENCE: ONLY 45 dB The particularly careful design of BLUEHELIX MAXIMA has made it possible to achieve significant values ​​in terms of silence and acoustic comfort , so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers MAXIMUM INNOVATION Developing sustainable and low environmental impact solutions capable of combating global warming is now a reality! BLUEHELIX MAXIMA is already capable of autonomously self-regulating (plug-in) and functioning correctly in total safety with mixtures of natural gas enriched with hydrogen already foreseen for distribution in Europe (*) THE BOILER CONTROL The innovative control and management electronics of BLUEHELIX MAXIMA is at the top levels of the category. The large 7'' full touch screen color graphic display allows real-time viewing of operating information thanks to simple and intuitive graphic screens. With a simple touch it is possible to set the temperature set points for heating and domestic hot water. Thanks to the contextual help, BLUEHELIX MAXIMA directly informs the user of the possible causes of the anomaly while providing the qualified technician with indications on possible solutions to undertake. Even the system pressure is no longer a problem because thanks to the semi-automatic system electroloading function, a simple ''touch'' is enough and the boiler automatically restores the adequate pressure without requiring manual intervention by the user. CONNECT The remote control Remote control supplied with the class A+ kit code for home comfort management also from Smartphone (*) Connection to the home WiFi network for internet access via the supplied RF/WiFi receiver CONNECT APP available for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android) Maximization of room comfort with modulating regulation of the flow temperature using the functions Environmental Climatic Compensation (CCA) and Compensation External Climatic (CCE) via external temperature detectable directly from the internet (or from an optional external probe) It improves the average seasonal efficiency in space heating by +4%. Weekly time programming in 30-minute intervals via APP CONNECT Alarm display also via APP CONNECT Operating modes: Off, Holiday, Automatic, Manual Three modifiable temperature levels: Comfort, Economy, Antifreeze TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) The geometry of the BLUEHELIX MAXIMA THERMOBALANCE™ thermal unit exchanger (figure A) allows operation at almost maximum design efficiency even in conditions of partial clogging, while with the same amount of deposits and sediments (e.g. due to the installation action on old systems) the traditional exchanger in figure B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits* is formed which hinder the heat exchange and reduce the efficiency below the nominal values. THE ENHANCED HYDRAULIC UNIT All models in the BLUEHELIX MAXIMA series are equipped with a 20-plate DHW plate heat exchanger and a 7.5 mWC head boosted heating circulator The considerable increase in the passage section of the 20-plate exchanger compared to a traditional one (e.g. with 14 plates) greatly reduces clogging over time, even in the presence of particularly hard water, greatly increasing its average life and reducing maintenance costs to a minimum. The enhanced system circulation pump with a head of 7.5 meters allows all BLUEHELIX MAXIMA models to function correctly, delivering all the necessary power even in systems with high pressure drops (particularly large new systems or old systems with ). MC2 : MULTI COMBUSTION CONTROL The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2: Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Furthermore, the new control electronics allow to reach high modulation fields which can reach up to 1:12 for the 34C model. In this way BLUEHELIX MAXIMA is able to adapt to the effective power required by the system with extreme ease and efficiency, avoiding annoying on/off operations which increase operating costs and reduce the average life of the product. CHARACTERISTICS Aesthetics with exclusive lines (Patent) that radically innovate the design concept through the use of tempered glass and curved shapes Wide range of optional accessories: CONNECT wi-fi remote control kit manageable via App, hydraulic connection kits (5 pipes, 4 taps), connection cover Boiler with thick stainless steel primary exchanger, with increased passages to guarantee durability and reduced maintenance Enhanced modulating heating circulator with high head on all models able to adapt even to particularly resistant systems Semi-automatic system electroloading as standard Enhanced domestic hot water exchanger with a high number of plates particularly immune to blockages and capable of maintaining the domestic hot water production capacity constant over time thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:12 (mod. 34C, 1:10 mod. 28C) MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology for better adaptability of use to varying gas network conditions 7 inch color graphic touch screen display Immediate display of the operating status thanks to the front multicolor LED Particularly suitable for operation in flues that require "heavy" ducting, thanks to operation with 50 mm diameter smoke outlets Designed to simplify and facilitate normal maintenance and cleaning operations thanks to easy access to internal components Simplified electrical wiring that does not require removal of the boiler shell thanks to direct access to the external connection terminal block available on the bottom of the product Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

FERROLI MASTER REMOTE TERMINAL + 3V POWER MODULE (replaces TAR-F and TER-F) 3V POWER MODULE. Module to be installed on each unit, it is able to activate the three fan speeds as well as any hot and cold valves. By means of microswitches it is able to manage different system configurations, 2 or 4 pipes or solutions with integration of electric resistance. It manages heating and cooling functions and accepts presence status inputs from the place to be air-conditioned. It receives the settings directly from one of the two Master controllers, on the machine or remotely, or from a serial connection with other units belonging to a single group of terminals with Master setting. MASTER REMOTE TERMINAL. By means of the remote terminal, which can be wall-mounted and connected with three wires to the power module, it is possible to set all the operating parameters of the units. The display allows you to view the room temperature (via an air probe integrated in the terminal) and the set point, and is complete with icons for status indication (on/off), operating mode (hot/cold/auto), fan speed (1 /2/3/car). Using the 4 keys it is therefore possible to modify the status, the operating mode, the set point and the fan speed. The display also shows any operating errors. The terminal allows the control of a single fan coil while via serial connection, it performs the function of master terminal and allows the management of a zone of fan coils. Replaces Basic Remote Thermostat TAR-F and Advanced Remote Thermostat TER-F. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferroli Weekly Chronothermostat Heating Wifi - IOS and Android Stylus Batteries Digital Programming 013010XA Connect Remote control for home comfort management also from Smartphone. Connection to the home WiFi network for internet access via the supplied RF/WiFi receiver. CONNECT APP available for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android) Through the APP it is possible to remotely control the boilers in «advanced» mode via the OpenTherm connection and in «basic» mode via the ON/OFF connection. Modulating regulation of the flow temperature with room climatic compensation, for boilers connected via OpenTherm ("evolved"). Modulating flow temperature regulation with climatic compensation via external temperature (detected from the internet or from an optional external probe), for boilers connected via OpenTherm ("advanced") It improves the average seasonal efficiency in space heating by +4% if combined with boilers via the OpenTherm connection. Room regulation with functioning as an ON/OFF chronothermostat, for boilers connected via on/off ("base") Weekly time programming in 30 minute intervals (via APP CONNECT). Reading of the external temperature from the internet (via APP CONNECT) or from an optional external probe (if present) Alarm display and possibility of boiler release (also via APP CONNECT) Operating modes: Off, Holiday, Automatic, Manual. Three modifiable temperature levels: Comfort, Economy, Antifreeze Battery status indicator (also from APP CONNECT) Material supplied: 2 1.5V AAA TYPE batteries, table stand, 230 Vac power supply, boiler connection USB cable, set of screws for wall fastening, user manual. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Ferroli Bluehelix Sublime 34C condensing boiler cod. 0TSB7AWA complete with IOt connect fume exhaust kit with remote control and methane or LPG external probe - New Heating ERP class A+ Sanitary ERP Class A Load profile XXL Heating max / min heat input (Hs) kW 30.6 / 2.9 Max / min heat output heating (80/60°C) kW 30 / 2.8 Max / min heat output heating (50/30°C) kW 32.5 / 3.1 Max / min DHW heat input (Hi) kW 34.7 / 2.9 Max / min DHW thermal power kW 34.0 / 2.8 Efficiency 30% (Hi) % 109.5 Max / min heating pressure bar 3 / 0.8 Sanitary flow rate ∆t 25°C l/min 19.5 Dimensions HxWxD 700x420x320 BLUEHELIX extension The most beautiful boiler ever BLUEHELIX SUBLIME, the most beautiful wall boiler ever with an exclusive design (Patented) has finally arrived on the market. Its exclusive lines radically innovate the aesthetic concept proposed so far, through the use of crystal and the revolutionary use of curved shapes. A multicolored ambient LED, set in a central position, allows you to perceive the status and operating modes of the boiler, even on a chromatic level. The large 7'' color full touch screen display integrated in the front surface of black tempered glass allows the user to interact with the product in a totally smart way. Supplied with a rich series of accessories such as: smart remote control manageable from iOS and Android apps, plumbing connection kit complete with taps and cover, external temperature probe, router with integrated mobile network connectivity. Conceived to fully satisfy the requests of a "robust " product from every point of view: primary heat exchanger with high passages, secondary sanitary exchanger enhanced with 20 plates, high head circulator, new control electronics with integrated connectivity on the VODAFONE mobile network BUSINESS that does not require a home wifi network. All elements designed to ensure maximum efficiency and reliability over time. INNOVATION Developing sustainable and low environmental impact solutions capable of combating global warming is now a reality! BLUEHELIX SUBLIME is already capable of autonomously self-regulating (plug-in) and functioning correctly in total safety with mixtures of natural gas enriched with hydrogen already foreseen for distribution in Europe (*). BLUEHELIX SUBLIME is not only beautiful but achieves one of the highest energy efficiency of the room heating in the boiler category: ηs 94% and when combined with the remote timer control and the external probe (supplied as standard) it reaches the energy class system grade A+ (scale from G to A+++). TOP SILENCE: ONLY 45 dB* The particularly careful design of BLUEHELIX SUBLIME has made it possible to achieve significant values ​​in terms of silence and acoustic comfort , so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. THE CONNECTION REVOLUTION! BLUEHELIX SUBLIME is the first connected boiler that uses IoT technology integrated into the mobile network powered by Vodafone Business. (*) Finally an intelligent boiler capable of communicating with the user both via the App, with smartphone devices, but also via text messages or voice messages (Patent Pending) to all other telephone devices, without the need for a home wifi network! More than easy, easy! Thanks to the self-configured "mobile" gateway that does not require any user intervention. THE BOILER CONTROL It has never been so SMART to interact with a boiler. The innovative control and management electronics of BLUEHELIX SUBLIME is at the top levels of the category. The large 7'' full touch screen color graphic display allows real-time viewing of operating information thanks to simple and intuitive graphic screens. With a simple touch it is possible to set the temperature set points for heating and domestic hot water. Thanks to the contextual help, BLUEHELIX SUBLIME directly informs the user of the possible causes of the anomaly while providing the qualified technician with indications on possible solutions to be undertaken. If necessary, thanks to the standard integrated Vodafone Business IoT connectivity, it is possible to directly request the intervention of the authorized technical assistance centre. Even the system pressure is no longer a problem because thanks to the semi-automatic system electroloading function, a simple ''touch'' is enough and the boiler automatically restores the adequate pressure without requiring manual intervention by the user RICH EQUIPMENT OF ACCESSORIES Wired remote control for home comfort management also from Smartphone Available APP for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android) Maximization of room comfort with modulating regulation of the delivery temperature using the Room Climatic Compensation (CCA) and External Climatic Compensation (CCE) functions It improves the average seasonal efficiency in space heating by +4%. Weekly time programming in 30 minute intervals via app Alarm display also via app Operating modes: Off, Holiday, Automatic, Manual Three modifiable temperature levels: Comfort, Economy, Antifreeze MANAGEMENT THROUGH APP The new FERROLI digital platform makes it possible to manage domestic comfort in an extremely simple and intuitive way and to use the remote connectivity services of the Authorized Assistance Centre. Using the FERROLI SMART CONNECT smartphone app, it is possible to check the operating status of BLUEHELIX SUBLIME and change its settings to obtain the best possible room comfort. Similarly, the innovative EASY SERVICE management platform created for Authorized Assistance Centers allows you to remotely monitor the product, guaranteeing comfort and assistance at all times. HYDRAULIC ACCESSORIES The attention paid to aesthetics for BLUEHELIX SUBLIME has no limits. The boiler is standard equipped with a connection cover matching the product to cover the hydraulic kit (5 pipes + 4 taps). Finally, for the most demanding and design-conscious customers, a complete series of optional flue accessories in a color coordinated with the boiler is available. THE FERROLI THERMOBALANCE TM THERMAL GROUP IN ITS 5 ELEMENTS The combustion cell and the exchanger of BLUEHELIX SUBLIME maximize the functional advantages and the constructive sturdiness. The single-circuit design ensures that any air bubbles in the system do not remain trapped in the exchanger, and makes it as easy as possible to clean it with chemical washing. High flow single circuit stainless steel heat exchanger, resistant to clogging and easy to clean Self-cooled burner door without insulating panel Exclusive special stainless steel hemispherical burner with long-life gasket Intelligent "Gas-adaptive" system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary THE ENGINE: COMBUSTION CELL The tube that makes up the BLUEHELIX SUBLIME exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and deposits. THE ENHANCED HYDRAULIC UNIT All models in the BLUEHELIX SUBLIME series are equipped with a 20-plate DHW plate exchanger and a 7.5 mWc boosted heating circulator. The significant increase in the passage section of the 20-plate exchanger compared to a traditional 14 plates) greatly reduces clogging over time, even in the presence of particularly hard water, greatly increasing its average life and minimizing maintenance costs. The enhanced system circulation pump with a head of 7.5 meters allows all BLUEHELIX SUBLIME models to function correctly, delivering all the necessary power even in systems with high head losses (particularly large new systems or old systems with ). MC2 : MULTI COMBUSTION CONTROL The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Furthermore, the new control electronics allow to reach high modulation fields which can reach up to 1:12 for the 34C model. In this way BLUEHELIX SUBLIME is able to adapt to the effective power required by the system with extreme ease and efficiency, avoiding annoying on/off operations which increase operating costs and reduce the average life of the product. IDENTITY CARD Aesthetics with exclusive lines (Patent) that radically innovate the design concept through the use of tempered glass and curved shapes IoT CONNECT: Vodafone Business advanced connectivity on standard mobile network capable of interacting with the user via App/Sms with smartphone devices, but also via voice messages to any telephone device Wide range of accessories supplied as standard: wired remote control that can be managed via the App, external probe, router for mobile network connectivity, hydraulic connection kits, connection cover Boiler with thick stainless steel primary exchanger, with increased passages to guarantee durability and reduced maintenance Enhanced modulating heating circulator with high head on all models able to adapt even to particularly resistant systems > Standard electrocharging Enhanced domestic hot water exchanger with a high number of plates particularly immune to blockages and capable of maintaining the domestic hot water production capacity constant over time thanks to the combination with the modulating remote control and the external temperature probe, supplied as standard, it reaches the maximum energy efficiency A+(scale from G to A+++) Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:12 (mod. 34C, 1:10 mod. 28C) MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology for better adaptability of use to varying gas network conditions Thanks to the standard mobile network connectivity, the user does not need to purchase additional components/contracts for setting up a home wifi network. 7 inch color graphic touch screen display Immediate display of the operating status thanks to the front multicolor LED Particularly suitable for operation in flues that require "heavy" ducting Designed to simplify and facilitate normal maintenance and cleaning operations Simplified electrical wiring that does not require removal of the boiler shell thanks to direct access to the external connection terminal block available on the bottom of the product EASY SERVICE: thanks to the continuous monitoring of the operating parameters, it is possible to activate remote technical assistance contracts through the Authorized Assistance Centers Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

NB: IN THE ABSENCE OF THE PRODUCT THE MODEL ISEA SWING 120 liters WILL BE SHIPPED VE Technical features Model: Calypso 120 Vertical Tank capacity: 120L Electric Power: 1500W Heating time: 3h - 39 min dimensions: 115 x 19 cm; 31kg Warranty: 2 years General characteristics CALYPSO BIG LITRAGGI ELECTRIC WALL-MOUNTED WATER HEATERS For indoors The CALYPSO electric water heater is made of high quality steel, with a special powder enamel treatment inside the cylinder, created with advanced electrostatic application techniques and subsequent kiln firing at 850°C for perfect glass porcelain coating of the tank. To keep heat loss to a minimum, CALYPSO has been insulated internally with high density polyurethane foam without CFC content, externally with a polymer coating with high resistance to heat loss. All models are 100% tested to ensure perfect operation at the intended operating pressure. CALYPSO water heaters can boast three safety devices: a hydraulic valve which is activated in the event of overpressure in the internal tank and two automatic overtemperature protection systems. Characteristics: Models with capacities from 50 to 150 litres. Also available in mixed thermo (MT) version. Removable electric resistance in copper Probe thermostatic control. Magnesium anode to protect the tank. 5-bolt flange to ensure sturdiness and ease of periodic maintenance. Temperature level indicator. On/off light. Safety valve calibrated at 8 bar with drain cock and safety screw External manual temperature regulation (vertical models). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS   FREE FIRST START-UP Technical features Model : OMNIA S 3.2 16T Product code : 0XHUGSWA Command included Optional accessories CONNECT CRP remote control Performance   Heating Useful power in heating with water set at 35° C: 15.9 kW Useful power in heating with water set at 45° C: 16.0 kW Useful power in heating with water set at 55°C: 16.0 kW Absorbed power with water set at 35° C: 3.53 kW Absorbed power with water set at 45° C: 4.57 kW Absorbed power with water set at 55° C: 5.61 kW Water flow rate with water set at 35° C : 2735 l/h Water flow with water set at 45° C : 2752 /h Water flow rate with water set at 55° C : 1720 l/h Cooling down Useful power in cooling with water set at 7 °C: 14.0 kW Useful power in cooling with water set at 18 °C: 13.6 kW Absorbed power with water set at 7° C: 5.60 kW Absorbed power with water set at 18° C: 3.77 kW Water flow rate with water set at 7° C : 2408 l/h Water flow rate with water set at 18° C : 2563 l/h External unit technical data Compressor type : Twin Rotary DC Number of compressors : 1 Number of cooling circuits: 1 Type of fans : DC axial Number of fans : 1 Sound power level in heating : 56 ~ 69 dB(A) Sound power level in cooling : 56 ~ 69 dB(A) Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Maximum piping length: 30 m Maximum pipe height difference: 20 m Indoor unit technical data Exchanger type : Brazed stainless steel plates Expansion vessel volume: 10 litres Water safety valve setting: 3 bar Minimum system water content: 40 litres System piping diameter: 1" gas F DHW piping diameter: 3/4" gas F Liquid pipe diameter : 9.52 mm (3/8") Gas pipe diameter: 15.88 (5/8") Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Dimensions and weight External unit dimensions (WxHxD): 1118x865x523 mm Outdoor unit weight: 112.0 Kg Internal unit dimensions (WxHxD): 595x1860x700 mm 5 years without worries Ferroli OMNIA ST 3.2 Air-water reversible heat pumps for split installation, with integrated DHW storage Efficiency marries comfort for integrated storage OMNIA ST 3.2 is the evolution of OMNIA S 3.2 and is part of the new range of Full Inverter R32 split heat pumps by Ferroli. When we speak of "split" we mean that the refrigerant circuit is divided between the two units, the external and the internal one. The outdoor unit contains the heart of the refrigerant circuit, from the compressor to the fan with the air side exchanger, which is connected to the refrigerant gas pipes towards the indoor unit. The indoor unit, on the other hand, contains the heart of the generator's hydraulic circuit with all the main pre-installed components, such as the high-efficiency circulator and the expansion tank, to safely allow quick and practical installation. The OMNIA ST 3.2 differ from the OMNIA S 3.2 in having integrated a storage tank for domestic hot water directly into the internal unit. This accumulation is 190L for sizes from 4 to 10, while it is 240L for uppers, from 12 to 16T. But that's not all, OMNIA ST 3.2 can be customized according to your needs, with an 18L inertial kit, kit for solar integration on the storage tank or with a kit for managing 2 different zones, classic direct and mixed, in case where we need 2 different temperatures on the terminals in the house Thanks to its wide operating range , among the widest on the market, OMNIA ST 3.2 works down to -25°C outside and produces hot water up to 65°C in nominal conditions. The new Full Inverter concept by Ferroli uses DC inverter modulations on the 3 main energy-intensive components of the machine, i.e. compressor, fan and pump. This makes it possible to modulate the power supplied by finely tracking the thermal load and allowing the user very high efficiencies and important energy savings . Furthermore, Ferroli's Full Inverter concept allows for the inrush currents to be reduced, avoiding sudden changes to the grid and guaranteeing a longer useful life for the components. With sound levels among the lowest on the market , OMNIA ST 3.2 is able to satisfy all system requirements, but can easily be integrated with a Ferroli boiler. The indoor unit, the heart of hydraulic distribution If the outdoor unit contains the heart of the refrigerant circuit, the indoor unit contains the heart of the water circuit. OMNIA ST 3.2 is much more than an exchanger with a pump. The hydronic module includes all the main components of the system and can be customized according to the user's needs. Stainless steel plate heat exchanger, pressure gauge and sensors, expansion tank, safety valve, automatic vent and brushless DC circulator are just some of the components you will find inside The control system The user interface has been equipped with capsense technology with 2.8” graphic display, which allows the user to interact with the product easily and extremely simply Modbus protocol It can be interfaced to BMS/BACS automation and management systems Heating and cooling Full Inverter modulation finely follows the desired setpoints, with the possibility of setting heating and cooling climatic curves, further optimizing consumption for the user Domestic hot water production When the DHW temperature probe calls the machine, it automatically switches to the domestic hot water tank with dedicated DHW set point. 3-way diverter valve supplied as standard Smart Grid input from photovoltaic and grid Digital Smart Grid inputs for the management of an input from the photovoltaic system and from the electricity grid. These allow you to optimize consumption and bill costs DHW tank electrical resistance The DHW electrical integration serves as integration, anti-legionella or reserve source in the event of an anomaly Fast DHW Priority to DHW production to bring the storage tank to the set point in the shortest possible time Anti-legionella function Allows you to set anti-legionella weekly cycles Silent mode Reduces the frequency of the compressor and the speed of the fan, so as to significantly reduce noise. Programmable on time slots ON/OFF From external contact. Activation and deactivation via an external contact, for example from a zone thermostat Hot / cold From external contacts. Summer/winter switching signal from outside, for example from the zone thermostat ECO function Dedicated setpoint for " Eco " operation. Settable with daily time band Anti-freeze protection Heat pump operation with circulator ON and possible electric booster The brand new Connect CRP and Connect CRP Zone The on-board interface communicates easily with the new Connect CRP intelligent systems, which can manage up to 8 thermostats divided into 2 zones, one direct and one mixed . Connect CRP is the brand new remote controller accessible via APP , available for both iOS and Android . The Connect CRP Zone, on the other hand, is a zone thermostat that communicates via RF with the Connect CRP. It can be placed in a classic 502 box, or left stand-alone on its practical table feet Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less