ATTENTION ! The support feet are to be purchased separately. OFFER Floor standing fan coil Aermec Heating only FCX62ACT 11.0 Kw with Electronic Thermostat Technical features Model : FCX62ACT Installation : on the floor Electronic thermostat included Performance Thermal power at 70°C: 10.94 kW Water flow rate: 960.0 l/h Load losses : 11 kPa Thermal power at 50°C: 6.43 kW Water flow rate : 752.0 l/h Load losses : 7 kPa Thermal power at 45°C: 5.44 kW Water flow rate : 945 l/h Load losses : 11 kPa Air flow rate : 520 ~ 920 m 3 /h Sound power level : 42 ~ 57 dB(A) Sound pressure level : 34 ~ 49 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Power Consumption: 40~82W Absorbed current : 0.4 kW Installation data Standard Coil Fitting Diameter: 19.05mm (3/4") Additional battery connection diameter: 12.70 mm (1/2") Dimensions and weight Dimensions without feet (HxWxD): 688x1320x220 mm Feet size: 105 mm Weight : 34.0 Kg Aermec FCX-ACT Efficient, silent and reliable fan coil units Aermec fan coils: a combination where the company and the brand identify the products and vice versa. In this air conditioning sector Aermec is synonymous with a leader: a primary company in Italy and at the top in Europe. A position that comes from many years of experience and which has been consolidated year after year. Wide range The range consists of 16 sizes for various versions, which allow for extreme installation versatility. The complete line of accessories satisfies any customization need. All the units have been designed taking advantage of Aermec's many years of experience, acquired through daily contact with operators in the sector. Aermec fan coils are in fact designed to make their insertion into the impact and their installation as easy as possible. Furthermore, their reliability is constant, guaranteed by Aermec's many years of experience. Efficient heating Unlike other types of radiators, the low operating inertia means that the fan coils react immediately to variations in air temperature. This produces constant room temperature as conditions vary and significant energy savings, because it avoids releasing heat into the room when it is not needed. At the same time, a stepless control of the feed water temperature prevents annoying cold drafts in the winter The FCX ACT fan coil concentrates high technological and functional characteristics that make it the ideal means of air conditioning for any environment. The supply of conditioned air is immediate and distributed throughout the room; FCX ACT generates heat if inserted in a heating system with boiler or heat pump but can also be used in the summer months as an air conditioner if the heating system is equipped with a water chiller. The FCX ACT fan coil is designed to satisfy every system need, thanks also to the wide range of accessories. Ease of installation with reversible hydraulic connections during installation. Full compliance with accident prevention regulations. Routine maintenance is reduced to periodic cleaning of the air filter with a vacuum cleaner. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Control with PXAE thermostat on the wall

Read more less

COMPLETE WITH SWITCH AERMEC FAN COIL FAN COIL model FCZ-ACT 100 with electronic control Technical features version with electronic thermostat vertical installation only - for two-pipe systems Hot-cold kW (High) : 2.00 - 0.84 Dimensions with feet (HxWxD): 586 x 640 x 220 (mm) Weight without feet: 13 kg White color - Coat RAL 9003 - Headboard and Plinths RAL 7047 General characteristics Aermec FCZ fan coils Taking advantage of the exceptional experience gained with fan coil units, Aermec presents the new FCZ series where elegant design marries state-of-the-art performance in terms of sound level and energy consumption. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any need. FCZ series fan coils are suitable for air conditioning. These machines with a renewed design are available in various configurations according to the installation position, with the possibility also of being ducted. They are characterized by multi-speed motors coupled to ABS fans with an impeller equipped with airfoil fins and an inspectable auger. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The unit equipped with a 3 or 4-row coil can have an additional 1 or 2-row secondary coil for 4-pipe system configurations. T-touch thermostat, available as an accessory, equipped with NFC technology to control the fan coil with smartphone. FCZ are compatible with the VMF management system. (Features vary by model) Cooling capacity: 1 ÷ 6.81 kW Thermal power: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Centralized control (Option) Compatible with VMF (Variable Multi Flow) system (Option) For two-pipe systems For four-pipe systems Characteristics: RAL9003 shell, RAL 7047 head Three speed centrifugal fan. Electric motors with permanently inserted capacitors Protective metal cabinet with anti-corrosion polyester paint Adjustable air distribution grille for U version. When the grille closes, the fan coil switches off automatically Low pressure drop in the heat exchange coils Ease of installation and maintenance G2 class air filter for all versions, easy to remove and clean. In the APC versions, air purification is ensured by the Plasmacluster purifier Extractable and inspectable augers for easy and effective cleaning Reversibility of the water connections during installation only for units with main, standard or oversized coil (Non-reversible for units with secondary coil). In the units with the T-Touch electronic thermostat and the ThermApp application, it is possible to simply place the smart device on the fan coil to set the operating modes and the weekly time programming. Using the graphical interface of the App, it is also possible to access numerous other information such as the alarm list, the nearest satellite, etc. Available for Android operating systems Versions Without on-board control Vertical and horizontal installation: FCZ_U FCZ_UA Vertical installation FCZ_DS FCZ_AS Versions With on-board control Vertical installation only: FCZ_D FCZ_A FCZ_ACT FCZ_APC Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FAN COIL FAN COIL AERMEC mod. OMNIA UL 16c with electronic control included UL listed fan coil units for both horizontal and vertical installation UL-C : version with electronic thermostat and cabinet Model: OMNIA UL 16 C Cooling capacity: 1.20 - 0.71 kW Thermal power: 2.91 - 1.54 kW Water content: 0.5 litres Dimensions (HxWxD): 513 x 750 x 173 (mm) Plinth Height: 93 (mm) Weight: 13.5 kg White color - Coat RAL 9002 - Headboard and Plinths RAL 7044 General characteristics AERMEC OMNIA UL Fan coils for universal installation for residential use, for heating, cooling and dehumidification, which can be combined with any heat generator. Cooling and heating Wall installation Floor installation Centrifugal fan Centralized control Compatible with VMF (Variable Multi Flow) system For two-pipe systems The units of the OMNIA UL (Universal Line) series are fan coil units suitable for air conditioning. Available in various configurations depending on the installation position, with the possibility of being ducted, they are characterized by multi-speed motors. They have fans in ABS material with an impeller equipped with airfoil fins and an inspectable cochlea. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The UL unit, in the PC version, is equipped as standard with the PLASMACLUSTER ionizing filter, while the RADIANT version is equipped with a radiant plate with on/off motor or inverter. The units can be equipped with multiple accessories and can be integrated into the VMF - Aermec centralized hydronic management system. Versions: UL-S: version without controls, with cabinet. Compatible with the VMF system UL: version with switch and cabinet UL-C: version with electronic thermostat and cabinet UL-PC: version with electronic thermostat, Plasmacluster filter (can be installed on site only) and mobile Characteristics: Cleaning the fan: With Omnia fan coils you can easily clean the fan blades. Now, in fact, it is possible to open the cochlea of ​​the fan (the casing that encloses the blades) and proceed with their periodic cleaning. Cleaning the condensate tray: Thanks to a new fixing system for the condensate collection tray, now, with Omnia fan coils, it can be cleaned easily. This important solution avoids, in the long term, the formation of bacteria, germs and molds in the basin itself, due to the condensation of the humidity present in the air Electrostatically precharged filter: Omnia fan coils are equipped, as standard, with electrostatically precharged air filters. These filters, thanks to their particular construction, absorb and retain suspended dust: the ideal system to ensure healthy air for the whole family. Silent operation: Thanks to the adoption of special centrifugal fans, the Omnia fan coils have extremely silent ventilation which takes these new fan coils to the top of acoustic comfort thanks to the absence of noise peaks UL listed fan coil units for wall or floor installation EUROVENT certification 3-speed centrifugal fan unit Maximum silence High design aesthetics with rounded lines Adjustable air distribution grille Automatic switch-off of the fan coil by closing the air distribution grille Small dimensions Electronic temperature regulation, automatic speed change on the fan, automatic season change and automatic on - off (version with thermostat) Reversibility of the hydraulic connections during installation Low pressure drop in the heat exchange coils Electric motors with permanently inserted capacitors Ease of installation and maintenance Easy to remove and clean air filter Electrostatically preloaded filter Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

COMPLETE WITH SWITCH FAN COIL FAN COIL AERMEC model FCZ-A 200 with control included heating only Technical features version with switch Heating version Dimensions with feet (HxWxD): 576 x 750 x 220 (mm) Weight without feet: 15 kg White color Coat RAL 9003 Headboard and Plinths RAL 7047 General characteristics Aermec FCZ fan coils Taking advantage of the exceptional experience gained with fan coil units, Aermec presents the new FCZ series where elegant design marries state-of-the-art performance in terms of sound level and energy consumption. They can be installed in any type of 2/4 pipe system and in combination with any heat generator even at low temperatures and thanks to the availability of various versions and configurations, it is easy to choose the optimal solution for any requirement. FCZ series fan coils are suitable for air conditioning. These machines with a renewed design are available in various configurations according to the installation position, with the possibility also of being ducted. They are characterized by multi-speed motors coupled to ABS fans with an impeller equipped with airfoil fins and an inspectable auger. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The unit equipped with a 3 or 4-row coil can have an additional 1 or 2-row secondary coil for 4-pipe system configurations. T-touch thermostat, available as an accessory, equipped with NFC technology to control the fan coil with smartphone. FCZ are compatible with the VMF management system. (Features vary by model) Cooling capacity: 1 ÷ 6.81 kW Thermal power: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Centralized control (Option) Compatible with VMF (Variable Multi Flow) system (Option) For two-pipe systems For four-pipe systems Characteristics: RAL9003 shell, RAL 7047 head Three speed centrifugal fan. Electric motors with permanently inserted capacitors Protective metal cabinet with anti-corrosion polyester paint Adjustable air distribution grille for U version. When the grille closes, the fan coil switches off automatically Low pressure drop in the heat exchange coils Ease of installation and maintenance G2 class air filter for all versions, easy to remove and clean. In the APC versions, air purification is ensured by the Plasmacluster purifier Extractable and inspectable augers for easy and effective cleaning Reversibility of the water connections during installation only for units with main, standard or oversized coil (Non-reversible for units with secondary coil). In the units with the T-Touch electronic thermostat and the ThermApp application, it is possible to simply place the smart device on the fan coil to set the operating modes and the weekly time programming. Using the graphical interface of the App, it is also possible to access numerous other information such as the alarm list, the nearest satellite, etc. Available for Android operating systems Versions Without on-board control Vertical and horizontal installation: FCZ_U FCZ_UA Vertical installation FCZ_DS FCZ_AS Versions With on-board control Vertical installation only: FCZ_D FCZ_A FCZ_ACT FCZ_APC Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FAN COIL FAN COIL AERMEC model OMNIA HL 26 vertical and horizontal installation Hot-cold kW (High): 3.83 - 1.68 Dimensions with feet (HxWxD): 615 x 980 x 191 (mm) Weight: 17.6 kg White color General characteristics OMNIA HL The units of the OMNIA HL (High Line) series are fan coils suitable for air conditioning. Available in various configurations, they can be installed on the floor or on the ceiling and are characterized by multi-speed motors, three of which are selectable. They have fans in ABS material with an impeller equipped with airfoil fins and an inspectable cochlea. This feature gives the machine a clear reduction in the level of noise emitted, as well as a reduction in the electrical absorption of the motor, compared to traditional fans with a metal structure. The HL unit, in the PC and PCM version, is standard equipped with the PLASMACLUSTER ionizing filter. The units can be equipped with multiple accessories and can be integrated into the VMF - Aermec centralized hydronic management system. HL (High Line) fan coils for both horizontal and vertical installation 4 sizes and 10 versions: HL: white cabinet with switch HL M: gray cabinet with switch HL N: white cabinet with VMF electronic thermostat HL NM: gray cabinet with VMF electronic thermostat HL L: white cabinet with self-closing flap and electronic thermostat HL LM: gray cabinet with self-closing flap and electronic thermostat HL PC: white cabinet with electronic thermostat and Plasmacluster filter (can be installed on site only) HL PCM: gray cabinet with electronic thermostat and Plasmacluster filter (can be installed on site only) HL S: white cabinet without controls. Compatible with the VMF System HL SM: gray cabinet without controls. Compatible with the VMF system On/off fan coils for universal installation for residential use, for heating, cooling and dehumidification, which can be combined with any heat generator. 3-speed centrifugal fan group Maximum silence High design aesthetics with rounded lines New adjustable air distribution grille Automatic switch-off of the fan coil by closing the air distribution grille Small dimensions Electronic temperature regulation, automatic speed change on the fan, automatic season change and automatic on - off (version with thermostat) Reversibility of the hydraulic connections during installation Low pressure drop in the heat exchange coils Electric motors with permanently inserted capacitors Ease of installation and maintenance Full compliance with accident prevention regulations Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less