Scopri la nostra esclusiva selezione di Ebara, perfetti per arricchire la tua casa o il tuo spazio lavorativo con stile, comfort e funzionalità. Ogni pezzo è scelto per garantire la migliore qualità e soddisfare ogni tua esigenza.
Hebara
Ebara Ebara Pressure Booster Unit With 2 Horizontal Multistage Pumps With Cast Iron Body And 304 Stainless Steel Manifolds 2gp Compact A/10 M 2001050400b Without Vessel And With Silent Liquid Mounting Arrangement
Ebara booster set with 2 horizontal multistage pumps with cast iron body and 304 stainless steel manifolds 2GP COMPACT A/10 M 2001050400B WITHOUT TANK AND WITH SILENT MONTALIQUIDI ARRANGEMENT General characteristics Brand: Ebara Model of the supplied product: 2GP COMPACT A/10 M Supplied product code: 2001050400B Data sheet Maximum flow rate, m3/h: 9.6 Maximum pumping height: 62m Maximum working pressure: 6.2 bar Maximum liquid temperature: 40°C Suction diameter: G1½ Outlet diameter: G1½ Electrical connection: 230V, single phase Motor power: 0.75 + 0.75 kW Motor type: 2 poles Description Protection and control panel with CE mark • Very low voltage auxiliary circuit • Starting and stopping of the engines are controlled by two pressure switches • It is possible to connect to floats, or minimum pressure switch, for avoid operation under water shortage conditions aspiration • There is a device that swaps the starting order of the pumps at every request • Diet: - single-phase 230V, 50Hz - three-phase 400V, 50Hz • Direct starting • Power circuit protection fuses • Auxiliary circuit protection fuses • IP 55 degree of protection • Main disconnect switch with door lock • Automatic switches - 0 - man. for each pump • Thermal protection reset • Indicator LEDs: - network presence - engine running - level alarm (if the optional float is installed) - motor protection (only for the three-phase version) • Alarm output setup Groups with two horizontal multistage pumps. Units with two horizontal double impeller pumps with stainless steel hydraulics. TYPICAL APPLICATIONS The typical applications of the 2GP series booster sets are: • Water supply for distribution networks inherent in the sector of the building service • Water supply for industry in general • Irrigation of gardens, parks and sports fields GROUP EQUIPMENT • Two pumps of the COMPACT series with 2-pole asynchronous motor self-ventilated, efficiency class IE2 for three-phase motors starting from 0.6 kW • Control unit: the system is equipped as standard with a control panel pump alternation control • Operation of the pumps regulated by pressure switches • Wetted parts are corrosion resistant • Base in galvanized steel • Manifolds in galvanized steel and on request AISI 304, AISI 316. I collectors are sized according to the total flow rate of the group pressurization • Shut-off valve on the suction and discharge sides of each pump • Check valve on the suction side of each pump • Pressure gauge, delivery side • Prearranged for delivery side hydroaccumulator vessel connection • Prepared for connecting external air feeders • Prepared for connection of a device against lack of water Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.638,00
Ebara Ebara Single Impeller Centrifugal Electric Pump With Single Phase Cast Iron Body Cmb 100 M 1170100000
Ebara single-impeller centrifugal electric pump with single-phase cast iron body CMB 100 M 1170100000 General characteristics Brand: Ebara Model: CMB 100M Code: 1170100000 Data sheet Maximum flow rate, m3/h: 15.1 Maximum pumping height: 19m Maximum working pressure: 1.9 bar Maximum liquid temperature: 90°C Suction diameter: G2 Outlet diameter: G1 ¼ Electrical connection: 230V, single phase Motor power: 0.75kW Hydraulic seal: Standard (Ceramic/Carbon/NBR) Pump material: Cast iron Motor type: 2 poles Description APPLICATIONS • Pressurization of domestic systems • Small irrigation • Handling of non-aggressive liquids for civil and industrial use • Washing systems • Vehicle washing TECHNICAL FEATURES • Available with brass impeller (CMA 0.50 GO, CMA 0.75 GO, CMA 1.00 GO) • The CMR version is equipped with an open impeller • They can be inserted in machinery for industrial use PUMP TECHNICAL DATA • Maximum working pressure: - 6 bar for CMA 0.50 - 0.75 - 1.00, CMB 0.75 - 1.00 - 1.50 - 2.00 - 3.00, CMC, CMD, CMR - 8 bar for CMA 1.50 - 2.00 - 3.00, CMB 4.00 - 5.50 • Maximum liquid temperature: - 40°C for CMA 0.50 - 0.75 - 1.00 - 90°C for the rest of the range • G1 suction connection for CMA 0.50 - 0.75 - 1.00, G1¼ for CMA 1.50 - 2.00 - 3.00, G1½ for CMR, G2 for CMB - CMC, G2½ for CMD • Delivery connection G1 for CMA, G1¼ for CMB, G1½ for CMR, G2 for CMC, G2½ for CMD • MEI > 0.4 For more information, consult our Data Books on the website www.ebaraeurope.com ENGINE TECHNICAL DATA • IE3 energy efficient motors starting from 0.75kW • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP44 degree of protection • Single-phase voltage 230V ±10% 50Hz, three-phase voltage 230/400V ±10% 50Hz • Permanently inserted capacitor and protection built-in automatic reset thermo-amperometric sensor for the motor single phase • Protection by the user for the three-phase version MATERIALS • Pump body in cast iron • Mechanical seal in Carbon/Ceramic/NBR • Impeller: - in PPE+PS reinforced with glass fibers for CMA 0.50 - 0.75 - 1.00 - in brass for CMA 1.50 - 2.00 - 3.00, CMB 2.00 - 3.00 - 4.00 - 5.50, CMR 0.75 - 1.00 - in cast iron for CMB 0.75 - 1.00 - 1.50, CMC, CMD • Tree: - in AISI 416 (integral) for CMA 0.50 - in AISI 303 (part in contact with the liquid) for CMA 0.75 - 1.00 - 1.50 - 2.00 - 3.00, CMB 0.75 - 1.00 - 1.50 - 2.00 - 3.00, CMC 0.75 - 1.00, CMD 1.50 - 2.00 - 3.00, CMR 0.75 - 1.00 - in AISI 304 (part in contact with the liquid) for CMB 4.00 - 5.50, CMD4.00 • Support: - in aluminum for CMA 0.50 - 0.75 - 1.00, CMB 0.75 - 1.00, CMC 0.75 - 1.00, CMR 0.75 - 1.00 - in cast iron for the rest of the range Description Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€322,00
Ebara Ebara Single Impeller Centrifugal Electric Pump With Single Phase Cast Iron Body Cmb/A 200 M 1170200000a
Ebara single-impeller centrifugal electric pump with single-phase cast iron body CMB/A 200 M 1170200000A General characteristics Brand: Ebara Model: CMB/A 200M Code: 1170200000A Data sheet Maximum flow rate, m3/h: 16.9 Maximum pumping height: 31m Maximum working pressure: 3.1 bar Maximum liquid temperature: 90°C Suction diameter: G2 Outlet diameter: G1 ¼ Electrical connection: 230V, single phase Motor power: 1.5kW Hydraulic seal: Standard (Ceramic/Carbon/NBR) Pump material: Cast iron Motor type: 2 poles Description APPLICATIONS • Pressurization of domestic systems • Small irrigation • Handling of non-aggressive liquids for civil and industrial use • Washing plants • Vehicle washing TECHNICAL FEATURES • Available with brass impeller (CMA 0.50 GO, CMA 0.75 GO, CMA 1.00 GO) • The CMR version is equipped with an open impeller • They can be inserted in machinery for industrial use PUMP TECHNICAL DATA • Maximum working pressure: - 6 bar for CMA 0.50 - 0.75 - 1.00, CMB 0.75 - 1.00 - 1.50 - 2.00 - 3.00, CMC, CMD, CMR - 8 bar for CMA 1.50 - 2.00 - 3.00, CMB 4.00 - 5.50 • Maximum liquid temperature: - 40°C for CMA 0.50 - 0.75 - 1.00 - 90°C for the rest of the range • G1 suction connection for CMA 0.50 - 0.75 - 1.00, G1¼ for CMA 1.50 - 2.00 - 3.00, G1½ for CMR, G2 for CMB - CMC, G2½ for CMD • Delivery connection G1 for CMA, G1¼ for CMB, G1½ for CMR, G2 for CMC, G2½ for CMD • MEI > 0.4 For more information, consult our Data Books on the website www.ebaraeurope.com ENGINE TECHNICAL DATA • IE3 energy efficient motors starting from 0.75kW • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP44 degree of protection • Single-phase voltage 230V ±10% 50Hz, three-phase voltage 230/400V ±10% 50Hz • Permanently inserted capacitor and protection built-in thermo-amperometric sensor with automatic reset for the motor single phase • Protection by the user for the three-phase version MATERIALS • Pump body in cast iron • Mechanical seal in Carbon/Ceramic/NBR • Impeller: - in PPE+PS reinforced with glass fibers for CMA 0.50 - 0.75 - 1.00 - in brass for CMA 1.50 - 2.00 - 3.00, CMB 2.00 - 3.00 - 4.00 - 5.50, CMR 0.75 - 1.00 - in cast iron for CMB 0.75 - 1.00 - 1.50, CMC, CMD • Tree: - in AISI 416 (integral) for CMA 0.50 - in AISI 303 (part in contact with the liquid) for CMA 0.75 - 1.00 - 1.50 - 2.00 - 3.00, CMB 0.75 - 1.00 - 1.50 - 2.00 - 3.00, CMC 0.75 - 1.00, CMD 1.50 - 2.00 - 3.00, CMR 0.75 - 1.00 - in AISI 304 (part in contact with the liquid) for CMB 4.00 - 5.50, CMD4.00 • Support: - in aluminum for CMA 0.50 - 0.75 - 1.00, CMB 0.75 - 1.00, CMC 0.75 - 1.00, CMR 0.75 - 1.00 - in cast iron for the rest of the range Description Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€490,00
Ebara Ebara Centrifugal Multistage Submersible Electric Pump With Hydrogo Stainless Steel Body M 40/15 A 1582071221 With Float
Ebara multistage centrifugal submersible electric pump with stainless steel body IDROGO M 40/15 A 1582071221 with float General characteristics Brand: Ebara Code: 1582071221 Model: IDROGO M 40/15 A Float: Yes Typology: Single-phase Data sheet Description Applications: handling of clear water from wells, cisterns and initial collection tanks; pressurization of domestic systems; small watering; Installation: in horizontal and vertical position Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€453,60
Ebara Ebara Pressure Booster Unit With 2 Horizontal Double Impeller Pumps With Cast Iron Hydraulics And Manifolds In Stainless Steel 304 2gp Cda 200 M 2001150000b Without Vessel And With Liquid Mounting Arrangement
Ebara booster set with 2 horizontal double impeller pumps with cast iron hydraulics and 304 stainless steel manifolds 2GP CDA 200 M 2001150000B WITHOUT TANK AND WITH MONTALIQUIDI ARRANGEMENT General characteristics Brand: Ebara Supplied product model: 2GP CDA 200M Supplied product code: 2001150000B Data sheet Maximum flow rate, m3/h: 13.2 Maximum pumping height: 64m Maximum working pressure: 6.4 bar Maximum liquid temperature: 45°C Suction diameter: G2 Outlet diameter: G1½ Electrical connection: 230V, single phase Motor power: 1.5 + 1.5 kW Motor type: 2 poles Description Protection and control panel with CE mark: • Very low voltage auxiliary circuit • Switching on and off of the engines by means of two pressure switches • It is possible to connect to floats, or minimum pressure switch, to avoid operation under water shortage conditions aspiration • There is a device that swaps the starting order of the pumps at every request • Diet: - single-phase 230V, 50Hz - three-phase 400V, 50Hz • Direct starting • Power circuit protection fuses • Auxiliary circuit protection fuses • IP 55 degree of protection • Main disconnect switch with door lock • Automatic switches - 0 - man. for each pump • Thermal protection reset • Indicator LEDs: - network presence - engine running - level alarm (if the optional float is installed) - motor protection (only for the three-phase version) • Alarm output setup Units with two horizontal double impeller pumps with cast iron hydraulics. TYPICAL APPLICATIONS The typical applications of the 2GP series booster sets are: • Water supply for distribution networks inherent in the sector of the building service • Water supply for industry in general • Irrigation of gardens, parks and sports fields GROUP EQUIPMENT • Two AGA series pumps with 2-pole asynchronous motor self-ventilated, efficiency class IE2 for three-phase motors starting from 0.75 kW • Switchgear: the system is equipped as standard with a control panel pump alternation control • Operation of the pumps regulated by pressure switches • Wetted parts are corrosion resistant • Base in galvanized steel • Manifolds in galvanized steel and on request AISI 304, AISI 316. I collectors are sized according to the total flow rate of the group pressurization • Shut-off valve on the suction and discharge sides of each pump • Check valve on the suction side of each pump • Pressure gauge, delivery side • Prearranged for delivery side hydroaccumulator vessel connection • Prepared for connecting external air feeders • Prepared for connection of a device against lack of water Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.876,00
Ebara Ebara Pressure Booster Group With 2 Horizontal Multistage Pumps With Cast Iron Body And 304 Stainless Steel Manifolds 2gp Compact A/12 M 2001050300b Without Vessel And With Silent Liquid Mounting Arrangement
Ebara booster set with 2 horizontal multistage pumps with cast iron body and 304 stainless steel manifolds 2GP COMPACT A/12 M 2001050300B WITHOUT TANK AND WITH SILENT MONTALIQUIDI ARRANGEMENT General characteristics Brand: Ebara Model of the supplied product: 2GP COMPACT A/12 M Supplied product code: 2001050300B Data sheet Maximum flow rate, m3/h: 9.6 Maximum pumping height: 74 m Maximum working pressure: 7.4 bar Maximum liquid temperature: 40°C Suction diameter: G1½ Outlet diameter: G1½ Electrical connection: 230V, single phase Motor power: 0.88 + 0.88 kW Motor type: 2 poles Description Protection and control panel with CE mark • Very low voltage auxiliary circuit • Starting and stopping of the engines are controlled by two pressure switches • It is possible to connect to floats, or minimum pressure switch, for avoid operation under water shortage conditions aspiration • There is a device that swaps the starting order of the pumps at every request • Diet: - single-phase 230V, 50Hz - three-phase 400V, 50Hz • Direct starting • Power circuit protection fuses • Auxiliary circuit protection fuses • IP 55 degree of protection • Main disconnect switch with door lock • Automatic switches - 0 - man. for each pump • Thermal protection reset • Indicator LEDs: - network presence - engine running - level alarm (if the optional float is installed) - motor protection (only for the three-phase version) • Alarm output setup Groups with two horizontal multistage pumps. Units with two horizontal double impeller pumps with stainless steel hydraulics. TYPICAL APPLICATIONS The typical applications of the 2GP series booster sets are: • Water supply for distribution networks inherent in the sector of the building service • Water supply for industry in general • Irrigation of gardens, parks and sports fields GROUP EQUIPMENT • Two pumps of the COMPACT series with 2-pole asynchronous motor self-ventilated, efficiency class IE2 for three-phase motors starting from 0.6 kW • Switchgear: the system is equipped as standard with a control panel pump alternation control • Operation of the pumps regulated by pressure switches • Wetted parts are corrosion resistant • Base in galvanized steel • Manifolds in galvanized steel and on request AISI 304, AISI 316. I collectors are sized according to the total flow rate of the group pressurization • Shut-off valve on the suction and discharge sides of each pump • Check valve on the suction side of each pump • Pressure gauge, delivery side • Prearranged for delivery side hydroaccumulator vessel connection • Prepared for connecting external air feeders • Prepared for connection of a device against lack of water Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.694,00
Ebara Ebara Self-Priming Electric Pump With Stainless Steel Single-Phase Jexm/B 150 1665070000b
Ebara self-priming electric pump with single-phase stainless steel body JEXM/B 150 1665070000B General characteristics Brand: Ebara Model: JEXM/B 150 Code: 1665070000B Data sheet Maximum flow rate, m3/h: 4.5 Maximum pumping height: 59 m Maximum working pressure: 5.9 bar Maximum liquid temperature: 45°C Suction diameter: G1¼ Outlet diameter: G1 Electrical connection: 230V, single phase Motor power: 1.1kW Hydraulic seal: Standard (Ceramic/Carbon/NBR) Pump material: AISI 304 stainless steel Motor type: 2 poles Description APPLICATIONS • Drinking water supply • Domestic pressurization • Small garden irrigation • Emptying of tanks and swimming pools • Movement of clean water in general TECHNICAL FEATURES • Practice • Easily transportable • Light PUMP TECHNICAL DATA • Maximum working pressure: 6 bar • Maximum liquid temperature: 45°C • Maximum suction depth: 8 m • G1 suction connection for JESX, G1¼ for JEX • G1 delivery connection PUMP TECHNICAL DATA • IE2 and IE3 high efficiency motors starting from 0.75kW • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP54 degree of protection (IP55 on request) • Single-phase voltage 230V ±10% 50Hz, three-phase voltage 230/400V ±10% 50Hz • Permanently inserted capacitor and protection built-in automatic reset thermo-amperometric sensor for the motor single phase • Protection by the user for the three-phase version MATERIALS • Pump body and seal holder disc in AISI 304 • Shaft in AISI 303 (part in contact with the liquid) • Impeller in AISI 304 for JEX, in PPE+PS reinforced with glass fibers for JESX • Venturi unit plus glass fiber reinforced PPO diffuser • Mechanical seal in Ceramic/Carbon/NBR Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€364,00
Ebara Ebara Peripheral Electric Pump Single Phase 230v For Domestic Use Pra 0.50 M 1150050000
Ebara single-phase peripheral electric pump 230v for domestic use PRA 0.50 M 1150050000 General characteristics Brand: Ebara Code: 1150050000 Model: PRA 0.50M Typology: single-phase 230v Data sheet Description Electric pump applications: Domestic uses; boiler feed; autoclave groups Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€123,20
Ebara Ebara Cast Iron Self-Priming Electric Pump Model Aga M 1.00 Single-Phase Motor 1.0
Ebara Cast Iron Self Priming Electric Pump Mod. Aga M 1.00 Single Phase Motor Single-phase motor 230V ±10% 50Hz Flow rate up to 100 l/min (6 m³/h) Head up to 59 m Maximum working pressure: - 6 bar for AGA 0.60-0.75-1.00 - 10 bar for the rest of the range Maximum liquid temperature: 45°C Maximum suction depth: 8 m IE2 and IE3 energy efficient motors starting from 0.75kW Insulation class F Degree of protection IP44 Pump body in cast iron Impeller in PPE+PS reinforced with glass fibers for AGA 0.60-0.75-1.00, in brass for the rest of the range AG extension The AGA - AGC electric pumps are self-priming cast iron electric pumps equipped with a Venturi group (ejector and diffuser) in PPE + PS reinforced with glass fibres. Practical, easy to use and easily transportable thanks to their low weight. The pump body is in cast iron for all models. Among their peculiarities is that of having the shaft in AISI 303 steel (for the part in contact with the liquid). The impellers available are in PPE + PS reinforced with glass fibers for AGA 0.60 – 0.75 – 1.00 and in brass for the rest of the range. The mechanical seal is in Ceramic/Carbon/NBR. The self-ventilated 2-pole asynchronous motors have high energy efficiency IE3 starting from 0.75 kW. PUMP TECHNICAL DATA Head from 16.5 to 68 m Flow rate from 0.3 to 9.6 m3/h Maximum working pressure: - 6 bar for AGA 0.60 - 0.75 - 1.00 - 10 bar for the rest of the range Maximum liquid temperature 45°C Maximum suction depth 8 m Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€124,00
Ebara Ebara Submersible Electric Pump For Emptying Sewage And Stainless Steel Body Dw/AM 150 A 1589071221a
Ebara submersible electric pump for emptying sewage and stainless steel body DW/AM 150 A 1589071221A Data sheet Brand: Ebara Supplied product code: 1589071221A Supplied product model: DW/AM 100 A Data sheet DW: SINGLE-CHANNEL IMPELLER DW VOX: VORTEX IMPELLER Description Applications: evacuation of civil and industrial waste water; draining of wells or excavations; drainage of sub-level areas; general handling of loaded liquids also with solid and filamentary substances in suspension; emptying of seepage water; handling of sewage waste water (sanitary services); emptying of cesspools. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€658,00
Ebara Ebara Centrifugal Multistage Submersible Electric Pump With Hydrogo Stainless Steel Body M 80/15 A 1592071221 With Float
Ebara submersible multistage centrifugal electric pump with stainless steel body IDROGO M 80/15 A 1592071221 with float General characteristics Brand: Ebara Code: 1592071221 Model: IDROGO M 80/15 A Float: Yes Typology: Single-phase Data sheet Description Applications: handling of clear water from wells, cisterns and initial collection tanks; pressurization of domestic systems; small watering; Installation: in horizontal and vertical position Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€474,60
Ebara Ebara Submersible Electric Pump For Emptying Sewage And Stainless Steel Body Dw/AM 75 A 1589031221a
Ebara submersible electric pump for sewage emptying and stainless steel body DW/AM 75 A 1589031221A Data sheet Brand: Ebara Code: 1589031221A Model: DW/AM 75A Data sheet DW: SINGLE-CHANNEL IMPELLER DW VOX: VORTEX IMPELLER Description Applications: evacuation of civil and industrial waste water; draining of wells or excavations; drainage of sub-level areas; general handling of loaded liquids also with solid and filamentary substances in suspension; emptying of seepage water; handling of sewage waste water (sanitary services); emptying of cesspools. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€530,60