Ebara submersible electric pump with stainless steel body BEST/A 2 MA 1721090021A General characteristics Brand: Ebara Supplied article number: 1721090021A Model of the supplied article: BEST/A 2 MA Cable length: 10m (H07 RN-F) Data sheet Description Electric pump applications: infiltration water handling; emptying of basements, garages and basements; drainage of small and medium-sized construction sites; Type of possible installations: fixed or mobile Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara booster set with 2 horizontal double impeller pumps with cast iron hydraulics and 304 stainless steel manifolds 2GP CDA 300 T 2001150304M WITHOUT TANK AND WITH MONTALIQUIDI ARRANGEMENT General characteristics Brand: Ebara Model of the supplied product: 2GP CDA 300 T Supplied product code: 2001150304M Data sheet Maximum flow rate, m3/h: 16.8 Maximum pumping height: 64m Maximum working pressure: 6.4 bar Maximum liquid temperature: 45°C Suction diameter: G2 Outlet diameter: G1½ Electrical connection: 400V, three-phase Engine power: 2.2 + 2.2 kW Motor type: 2 poles Description Protection and control panel with CE mark: • Very low voltage auxiliary circuit • Switching on and off of the engines by means of two pressure switches • It is possible to connect to floats, or minimum pressure switch, to avoid operation under water shortage conditions aspiration • There is a device that swaps the starting order of the pumps at every request • Diet: - single-phase 230V, 50Hz - three-phase 400V, 50Hz • Direct starting • Power circuit protection fuses • Auxiliary circuit protection fuses • IP 55 degree of protection • Main disconnect switch with door lock • Automatic switches - 0 - man. for each pump • Thermal protection reset • Indicator LEDs: - network presence - engine running - level alarm (if the optional float is installed) - motor protection (only for the three-phase version) • Alarm output setup Units with two horizontal double impeller pumps with cast iron hydraulics. TYPICAL APPLICATIONS The typical applications of the 2GP series booster sets are: • Water supply for distribution networks inherent in the sector of the building service • Water supply for industry in general • Irrigation of gardens, parks and sports fields GROUP EQUIPMENT • Two AGA series pumps with 2-pole asynchronous motor self-ventilated, efficiency class IE2 for three-phase motors starting from 0.75 kW • Switchgear: the system is equipped as standard with a control panel pump alternation control • Operation of the pumps regulated by pressure switches • Wetted parts are corrosion resistant • Base in galvanized steel • Manifolds in galvanized steel and on request AISI 304, AISI 316. I collectors are sized according to the total flow rate of the group pressurization • Shut-off valve on the suction and discharge sides of each pump • Check valve on the suction side of each pump • Pressure gauge, delivery side • Prearranged for delivery side hydroaccumulator vessel connection • Prepared for connecting external air feeders • Prepared for connection of a device against lack of water Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara single-phase centrifugal electric pump with cast iron body CDA/B 150 M 1210150000B General characteristics Brand: Ebara Model: CDA/B 150 M Code: 1210150000B Data sheet Maximum flow rate, m3/h: 6.6 Maximum pumping height: 52m Maximum working pressure: 5.2 bar Maximum liquid temperature: 90°C Suction diameter: G1 ¼ Outlet diameter: G1 Electrical connection: 230V, single phase Motor power: 1.1kW Hydraulic seal: Standard (Ceramic/Carbon/NBR) Pump material: Cast iron Motor type: 2 poles Description APPLICATIONS • Pressurization of domestic systems • Small irrigation • Handling of non-aggressive liquids for civil and industrial use • Washing plants • Vehicle washing TECHNICAL FEATURES • Available with brass impeller (CDA 0.75 M GO, CDA 1.00 M/T GO) • They can be inserted in machinery for industrial use PUMP TECHNICAL DATA • Maximum working pressure: 6 bar for CDA 0.75 - 1.00, 10 bars for the rest of the range • Maximum liquid temperature: 40°C for CDA 0.75 - 1.00, 90°C for the rest of the range • Suction connection: G1 for CDA 0.75 - 1.00, G1¼ for CDA 1.50 - 2.00 - 3.00, G1½ for CDA 4.00 - 5.50 • Delivery connection: G1 for CDA 0.75 - 1.00 - 1.50 - 2.00 - 3.00, G1¼ for CDA 4.00 - 5.50 ENGINE TECHNICAL DATA • IE3 high energy efficiency motors for powers from 0.75kW • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP44 degree of protection • Single-phase voltage 230V ± 10% 50Hz, three-phase voltage 230/400V ± 10% 50Hz • Permanently inserted capacitor and protection built-in automatic reset thermo-amperometric sensor for the motor single phase • Protection by the user for the three-phase version MATERIALS • Pump body in cast iron • Mechanical seal in Ceramic/Carbon/NBR • Impeller in PPE+PS reinforced with glass fibers for CDA 0.75 - 1.00, in brass for the rest of the range • Shaft in AISI 303 for CDA 0.75 - 1.00 - 1.50 - 2.00 - 3.00, in AISI 304 for CDA 4.00 - 5.50 • Support in aluminum for CDA 0.75 - 1.00, in cast iron for the rest of the range • Seal holder disc in AISI 304 for CDA 0.75 - 1.00, in integrated cast iron on the engine mount for the rest of the range Description Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara double impeller centrifugal electric pump with three-phase cast iron body CDA/I 150 T 1210150004I General characteristics Brand: Ebara Model: CDA/I 150 T Code: 1210150004I Data sheet Maximum flow rate, m3/h: 6.6 Maximum pumping height: 52m Maximum working pressure: 5.2 bar Maximum liquid temperature: 90°C Suction diameter: G1 ¼ Outlet diameter: G1 Electrical connection: 400V, three-phase Motor power: 1.1kW Hydraulic seal: Standard (Ceramic/Carbon/NBR) Pump material: Cast iron Motor type: 2 poles Description APPLICATIONS • Pressurization of domestic systems • Small irrigation • Handling of non-aggressive liquids for civil and industrial use • Washing plants • Vehicle washing TECHNICAL FEATURES • Available with brass impeller (CDA 0.75 M GO, CDA 1.00 M/T GO) • They can be inserted in machinery for industrial use PUMP TECHNICAL DATA • Maximum working pressure: 6 bar for CDA 0.75 - 1.00, 10 bars for the rest of the range • Maximum liquid temperature: 40°C for CDA 0.75 - 1.00, 90°C for the rest of the range • Suction connection: G1 for CDA 0.75 - 1.00, G1¼ for CDA 1.50 - 2.00 - 3.00, G1½ for CDA 4.00 - 5.50 • Delivery connection: G1 for CDA 0.75 - 1.00 - 1.50 - 2.00 - 3.00, G1¼ for CDA 4.00 - 5.50 ENGINE TECHNICAL DATA • IE3 high energy efficiency motors for powers from 0.75kW • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP44 degree of protection • Single-phase voltage 230V ± 10% 50Hz, three-phase voltage 230/400V ± 10% 50Hz • Permanently inserted capacitor and protection built-in automatic reset thermo-amperometric sensor for the motor single phase • Protection by the user for the three-phase version MATERIALS • Pump body in cast iron • Mechanical seal in Ceramic/Carbon/NBR • Impeller in PPE+PS reinforced with glass fibers for CDA 0.75 - 1.00, in brass for the rest of the range • Shaft in AISI 303 for CDA 0.75 - 1.00 - 1.50 - 2.00 - 3.00, in AISI 304 for CDA 4.00 - 5.50 • Support in aluminum for CDA 0.75 - 1.00, in cast iron for the rest of the range • Seal holder disc in AISI 304 for CDA 0.75 - 1.00, in integrated cast iron on the engine mount for the rest of the range Description Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara self-priming electric pump with three-phase cast iron body AGA/I 300 T 1110300004I General characteristics Brand: Ebara Model: AGA/I 300 T Code: 1110300004I Data sheet Maximum flow rate, m3/h: 6.0 Maximum pumping height: 72m Maximum working pressure: 7.2 bar Maximum liquid temperature: 45°C Suction diameter: G1½ Outlet diameter: G1 Electrical connection: 400V, three-phase Engine power: 2.2kW Hydraulic seal: Standard (Ceramic/Carbon/NBR) Pump material: Cast iron Motor type: 2 poles Description APPLICATIONS • Domestic pressurization • Small garden irrigation • Vehicle washing • Movement of clean water in general TECHNICAL FEATURES • Available with brass impeller (AGA 0.60 M GO, AGA 0.75 M GO, AGA 1.00 M GO, AGA 1.00 T GO) PUMP TECHNICAL DATA • Maximum working pressure: - 6 bar for AGA 0.60-0.75-1.00 - 10 bar for the rest of the range • Maximum liquid temperature: 45°C • Maximum suction depth: 8 m • G1 suction connection for AGA 0.60-0.75-1.00, G1½ for the rest of the range • G1 delivery connection ENGINE TECHNICAL DATA • IE3 energy efficient motors starting from 0.75kW • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP44 degree of protection • Single-phase voltage 230V ±10% 50Hz, three-phase voltage 230/400V ±10% 50Hz • Permanently inserted capacitor and protection built-in automatic reset thermo-amperometric sensor for the motor single phase • Protection by the user for the three-phase version MATERIALS • Pump body in cast iron • Seal holder disc in AISI 304 for AGA 0.60-0.75-1.00, in cast iron integrated on the engine mount for the rest of the range • Shaft in AISI 303 (part in contact with the liquid) • Impeller in PPE+PS reinforced with glass fibers for AGA 0.60-0.75- 1.00, in brass for the rest of the range • Mechanical seal in Ceramic/Carbon/NBR • Ejector and diffuser in PPE+PS reinforced with glass fibers Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara submersible electric pump for emptying waste water and stainless steel body DW/A 150 T 1589070004A Technical data sheet Brand: Ebara Code: 1589070004A Model: DW/A 150 T Technical data sheet DW: SINGLE CHANNEL IMPELLER DW VOX: VORTEX IMPELLER Description Applications: evacuation of civil and industrial waste water; draining of wells or excavations; drainage of sub-grade areas; general handling of loaded liquids including those containing suspended solid and filamentous substances; emptying of seepage water; movement of sewage water (sanitary services); emptying of cesspits. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara submersible electric pump for emptying waste water and stainless steel body DW M 150 A 1589071221 Technical data sheet Brand: Ebara Product code supplied: 1589071221 Product model supplied: DW M 150 A Technical data sheet DW: SINGLE CHANNEL IMPELLER DW VOX: VORTEX IMPELLER Description Applications: evacuation of civil and industrial waste water; draining of wells or excavations; drainage of sub-grade areas; general handling of loaded liquids including those containing suspended solid and filamentous substances; emptying of seepage water; movement of sewage water (sanitary services); emptying of cesspits. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara self-priming electric pump with single-phase steel body JEXM/A 120 1665060000 General characteristics Brand: Ebara Code: 1665060000 Model: JEXM/A 120 Data sheet Description Electric pump applications: drinking water supply; domestic pressurization; small irrigation of gardens; emptying tanks and pools; movement of clean water in general. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara double impeller centrifugal electric pump with three-phase C cast iron body da/i 300 T 1210300004I General characteristics Brand: Ebara Code: 1210300004I Model: Cda/i 300 T Typology: three-phase Data sheet Description Application of electric pump: pressurization of electrical systems; small watering handling of non-aggressive liquids for civil and industrial use; washing facilities; vehicle wash. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara submersible electric pump for emptying sewage and stainless steel body DW VOX M 75 A 1599031221 Data sheet Brand: Ebara Supplied product code: 1599031221 Supplied product model: DW VOX M 75 A Data sheet DW: SINGLE-CHANNEL IMPELLER DW VOX: VORTEX IMPELLER Description Applications: evacuation of civil and industrial waste water; draining of wells or excavations; drainage of sub-level areas; general handling of loaded liquids also with solid and filamentary substances in suspension; emptying of seepage water; handling of sewage waste water (sanitary services); emptying of cesspools. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara booster set with 2 horizontal multistage cast iron pumps and 304 stainless steel manifolds 2GPE COMPACT A10 ESPM 2001051101 WITHOUT TANK AND WITH SILENT MONTALIQUIDI PREPARATION General characteristics Brand: Ebara Supplied product model: 2GPE COMPACT A10 ESPM Supplied product code: 2001051101 Description TYPICAL APPLICATIONS The base of the group is in galvanized steel and so are the manifolds. The delivery manifold is designed to accommodate 2 tanks a membrane of the vertical type; 2 pressure switches are mounted on it, the electrical panel and a pressure gauge. Each electric pump has in suction a shut-off valve and a non-return valve, with possibility of connection to an air feeder and is equipped with another isolating valve in delivery. TECHNICAL FEATURES The HERTZ TWIN control panel is an automatic control system and protection for two centrifugal electric pumps equipped with three-phase motors induction. The panel power supply can be three-phase or single phase. The HERTZ TWIN control panels include a pump control software and allow speed adjustment of the motor by means of an electronic frequency variator (Inverter) which powers the pump motor. As the rotation speed varies pump performance varies in terms of flow rate and head allowing its optimal use in all conditions while saving energy. ADVANTAGES • Energy savings as the controller modulates the pump a depending on the hydraulic energy demand of the plant with respect to a direct connection to the network • Better and faster regulation • Reduction of water hammering thanks to a start and stop gradual • Better comfort in heating, air conditioning and heating systems pressurization • Reduced starting current • Exchange at each restart of the powered pump • Speed ​​modulation on both pumps for one optimal adjustment The typical applications of the GPE series booster sets with i paintings are: • Water supply for distribution networks, condominiums, schools, hotels, hospitals, etc. • Water supply for industry in general • Irrigation of gardens, parks and sports fields Inverter-controlled units with two horizontal multistage pumps. PUMP CHARACTERISTICS FIELD OF USE • Maximum working pressure: 10 bar • Maximum liquid temperature: 40°C MATERIALS • Pump body and support in cast iron • External jacket in AISI 304 • Technopolymer impeller and diffuser • Shaft in AISI 416 TECHNICAL DATA • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP44 degree of protection • Single-phase voltage 230V ± 10% 50Hz, three-phase voltage 230/400V ± 10% 50Hz • Permanently inserted capacitor and protection thermo-amperometric sensor with built-in automatic reset for the single-phase motor • Protection by the user for the three-phase version Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ebara self-priming electric pump with single-phase stainless steel body JEXM/A 100 1665050000 General characteristics Brand: Ebara Model: JEXM/A 100 Code: 1665050000 Data sheet Maximum flow rate, m3/h: 4.2 Maximum pumping height: 45m Maximum working pressure: 4.5 bar Maximum liquid temperature: 45°C Suction diameter: G1¼ Outlet diameter: G1 Electrical connection: 230V, single phase Motor power: 0.75kW Hydraulic seal: Standard (Ceramic/Carbon/NBR) Pump material: AISI 304 stainless steel Motor type: 2 poles Description APPLICATIONS • Drinking water supply • Domestic pressurization • Small garden irrigation • Emptying of tanks and swimming pools • Movement of clean water in general TECHNICAL FEATURES • Practice • Easily transportable • Light PUMP TECHNICAL DATA • Maximum working pressure: 6 bar • Maximum liquid temperature: 45°C • Maximum suction depth: 8 m • G1 suction connection for JESX, G1¼ for JEX • G1 delivery connection PUMP TECHNICAL DATA • IE2 and IE3 high efficiency motors starting from 0.75kW • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP54 degree of protection (IP55 on request) • Single-phase voltage 230V ±10% 50Hz, three-phase voltage 230/400V ±10% 50Hz • Permanently inserted capacitor and protection built-in thermo-amperometric sensor with automatic reset for the motor single phase • Protection by the user for the three-phase version MATERIALS • Pump body and seal holder disc in AISI 304 • Shaft in AISI 303 (part in contact with the liquid) • Impeller in AISI 304 for JEX, in PPE+PS reinforced with glass fibers for JESX • Venturi unit plus glass fiber reinforced PPO diffuser • Mechanical seal in Ceramic/Carbon/NBR Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less