Waterline PEARL 18 liter Pearl series cabinet softener 18 HP Resin volume lt 18 Dimensions lxpxh mm 345x525x1125 inch 3/4" Average cycle m3/F 99 Salt consumption kg 2.7 Max average flow l/h 1000/1300 PEARL extension Cabinet softening system with automatic electronic valve with volume/time regeneration. Composite cylinder with glass fiber coated PE liner and epoxy resin. Pearl series cabin cruiser made entirely in Italy. It combines a modern and elegant design with an efficient performance without sacrificing versatility and functionality. CLACK VALVE WS1CI Control valve suitable for residential automatic softening systems Solid-state micropressor with easy access front panel settings 4 regeneration modes: immediate volumetric, delayed volumetric, delayed chronometric or pressure difference Programming with units of measure ppm, French degrees, German degrees or cubic meters Store configuration and data in non-volatile memory Lithium emergency battery with 24h autonomy Certified to NSF/ANSI Standards 44.61 and 372 Integrated hardness mixer Power supply 230V 50/60HZ Operating pressure min 1.4 bar - max 8.6 bar Temperature min 4 °C max 43 C° Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Attention ! minimum order quantity: 5 bags Product features : Model: ITALKALI Weight : 25Kg Height : 57cm Width : 37cm Depth : 12cm Technical features Natural rock salt with a high NaCl content. Specific for softeners. Compacted in pellets to obtain a slow and constant dissolution produced without any chemical treatment and with reduced environmental impact. It reduces consumption and preserves the duration and effectiveness of the softener resins.

Read more less

Attention ! minimum order quantity: 5 bags Product features : Model: ITALKALI Weight : 25Kg Height : 57cm Width : 37cm Depth : 12cm Technical features From a contaminated sea Natural rock salt in very pure crystals with a 99.4% NaCl content. Ideal for food consumption, the purest, crystalline, dry, selected in regular crystals suitable for all uses in the food industry

Read more less

AcquaBrevetti cabinet softener mod. BRAVOCAB 15 cod. CD10415 Resin volume 15 litres In/Out connections 1” F Nominal flow rate m3/h 1.4 Peak flow rate (P=1 bar) m3/h 2.0 Exchange capacity m3x° 43 - 73 - 102 Min/max pressure bar 1.5 - 9 Min/max water temperature °C 5 – 50 Supply voltage V – Hz 220/24V – 50/60 Hz Dimensions HxWxD 840x695x402 (total with bypass) BRAVOCAB 15 Purpose of the system One of the crucial problems in plumbing and heating systems is represented by the formation of limescale deposits caused by the hardness of the water. Limescale deposits on pipes, boilers and water heaters, clogging them, reducing their efficiency, increasing energy costs and maintenance costs. Furthermore, limescale deposits on tubs and showers, sinks, taps, creating unsightly stains. But that's not all: hard water does not allow you to wash skin and clothes well due to the deposit of encrusting salts which, moreover, require the use of a greater quantity of detergents and soaps. Softening is the technology that currently offers the greatest guarantees of success in the prevention of limescale deposits. Principle of operation The BravoCAB softeners contain ion exchange resins which selectively retain the calcium and magnesium ions (responsible for the formation of scaling) releasing sodium ions into the water. A special valve (hardness regulator) allows you to modulate the hardness value at the outlet of the softener itself. Once the exchange capacity is exhausted, the exchange resins are regenerated using sodium chloride (salt). BravoCAB softeners are fully automatic and independently manage the work and regeneration phases. Advantages of softening Why would I need a water softener? Save up to 25% on energy costs. Cost reduction for repairs and maintenance. No limescale stains on taps, shower cubicles, walls. Stop encrustations on pipes, appliances and boilers. Reduction in the consumption of detergents up to 50%. Softer, healthier skin and hair. More softness for clothes and sheets. Main features BravoCAB is a cabinet softener designed to reduce water hardness by safeguarding domestic plumbing and heating systems, steam generators and cooling systems, humidification systems, washing machines and laundries, process water systems. Thanks to the technical design and the registered patents, the BravoCAB water softeners combine intelligent operation with great simplicity, allowing water and salt consumption to be kept to a minimum. The BravoCAB softeners are distinguished from the other softeners available on the market for some salient features. Simplicity The softener valve can be disassembled with bare hands and in a few moves; it is made of certified food-grade plastic and consists of 30% fewer pieces than other commercially available valves. The valve is mounted directly on the rotor without the aid of mechanical connections. No part of the valve, especially those in contact with the softened water, is made of metallic materials, excluding corrosion problems with the consequent release of metals (copper, zinc, lead) into the water. The extremely innovative electronics are reliable and simple to program: in a few seconds and by pressing just two buttons, the system is put into operation. There is no need to run tests or start special procedures. Variable regenerative level BravoCAB is able to use resins with different regenerative levels which are established in a completely automatic and intelligent way by the electronics on the basis of real consumption. In this way the softener automatically adjusts itself to the specific needs of the user, consuming only the strictly necessary salt and water. This guarantees salt savings of up to 47% and water savings of up to 50% compared to a softener with a fixed regeneration level. Efficiency The regeneration of the resins is carried out in proportion to the effective consumption and takes place in counter-current for an effective and complete regeneration of the resins. Dry salt vat The salt vat works dry and is filled only at the time of regeneration. This ensures that salt bridges do not form and reduces the risk of uncontrolled water leakage. Furthermore, the float that controls the filling is not under pressure during the operation of the softener, further reducing the risk of uncontrolled water leakage. Safety BravoCAB softeners are supplied complete with by-pass. Furthermore, BravoCAB carries out a regeneration at most every 4 days. The maintenance of statistical and programming data even in the event of a power outage is ensured by a permanent non-volatile memory. BravoCAB complies with current Italian regulations on the treatment of water intended for human consumption. BravoCAB is equipped with a backlit LCD display that is easier to read and ideal for applications in semi-underground or poorly lit locations. Programming and setting up is quick and easy: just set the time and water hardness. The display shows: time, hardness, regeneration time, residual capacity percentage, hourly flow rate, total daily consumption and average daily consumption. The electronics is also equipped with a diagnostic function which allows you to monitor the days of operation, the number of regenerations, the control of the volumetric turbine and the microswitch. BravoCAB softeners are equipped with by-pass with built-in hardness calibrator. It is made entirely of food-grade plastic. BRAVOCAB Water softener with cabin Page 3 can be assembled with the aid of clips only. None of the parts in contact with the softened water are made of metal, eliminating the risk of corrosion with the consequent release of metals into the water. Testing of BravoCAB softeners is included. Salt is excluded from the supply of the softener. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Euroacque volumetric proportional self-disinfecting softener EKOSOFT M20 - ESOFTM17 General characteristics Brand: Eurowaters Code: ESOFTM17 Model: EKOSOFT M20 Data sheet Cyclic m³x°Fr: 102 Nominal flow Lt/hour: 2000 Connections: 1'' M Dimensions: 320x500x1135mm Description TYPE : Automatic water softeners with proportional volumetric regeneration for reduced salt/water consumption for regenerations. They are suitable equipment for potable use. Including automatic chlorine maker. TECHNICAL SPECIFICATIONS : Equipped with digital display (backlit), automatic disinfection, by-pass for water hardness adjustment. EKOSOFT softeners are supplied in the space-saving cabin version (monobloc with lid). START-UP INCLUDED IN THE PRICE : After installation, simply call one of the technical assistance centers (national coverage for info 0523.952272). A specialized technician will check the installation and adjust the softener so that it works at its best and with minimal salt and water consumption. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Cabinet water softener Acqua Brevetti mod. BRAVO CAB 11 cod. CD10411 Resin volume liters 11 In/Out connections 1” F Nominal flow rate m3/h 0.9 Peak flow rate (P=1 bar) m3/h 2.0 Exchange capacity m3x° 28 – 45 - 61 Min/max pressure bar 1.5 - 9 Min/max water temperature °C 5 – 50 Supply voltage V – Hz 220/24V – 50/60 Hz Dimensions HxWxD 695x530x400 (total with bypass) BRAVOCAB 11 Purpose of the system One of the crucial problems in plumbing and heating systems is represented by the formation of limescale deposits caused by the hardness of the water. Limescale deposits on pipes, boilers and water heaters, clogging them, reducing their efficiency, increasing energy costs and maintenance costs. Furthermore, limescale deposits on tubs and showers, sinks, taps, creating unsightly stains. But that's not all: hard water does not allow you to wash skin and clothes well due to the deposit of encrusting salts which, moreover, require the use of a greater quantity of detergents and soaps. Softening is the technology that currently offers the greatest guarantees of success in the prevention of limescale deposits. Principle of operation The BravoCAB softeners contain ion exchange resins which selectively retain the calcium and magnesium ions (responsible for the formation of scaling) releasing sodium ions into the water. A special valve (hardness regulator) allows you to modulate the hardness value at the outlet of the softener itself. Once the exchange capacity is exhausted, the exchange resins are regenerated using sodium chloride (salt). BravoCAB softeners are fully automatic and independently manage the work and regeneration phases. Advantages of softening Why would I need a water softener? Save up to 25% on energy costs. Cost reduction for repairs and maintenance. No limescale stains on taps, shower cubicles, walls. Stop encrustations on pipes, appliances and boilers. Reduction in the consumption of detergents up to 50%. Softer, healthier skin and hair. More softness for clothes and sheets. Main features BravoCAB is a cabinet softener designed to reduce water hardness by safeguarding domestic plumbing and heating systems, steam generators and cooling systems, humidification systems, washing machines and laundries, process water systems. Thanks to the technical design and the registered patents, the BravoCAB water softeners combine intelligent operation with great simplicity, allowing water and salt consumption to be kept to a minimum. The BravoCAB softeners are distinguished from the other softeners available on the market for some salient characteristics. Simplicity The softener valve can be disassembled with bare hands and in a few moves; it is made of certified food-grade plastic and consists of 30% fewer pieces than other commercially available valves. The valve is mounted directly on the rotor without the aid of mechanical connections. No part of the valve, especially those in contact with the softened water, is made of metallic materials, excluding corrosion problems with the consequent release of metals (copper, zinc, lead) into the water. The extremely innovative electronics are reliable and simple to program: in a few seconds and by pressing just two buttons, the system is put into operation. There is no need to run tests or start special procedures. Variable regenerative level BravoCAB is able to use resins with different regenerative levels which are established in a completely automatic and intelligent way by the electronics on the basis of real consumption. In this way the softener automatically adjusts itself to the specific needs of the user, consuming only the strictly necessary salt and water. This guarantees salt savings of up to 47% and water savings of up to 50% compared to a softener with a fixed regeneration level. Efficiency The regeneration of the resins is carried out in proportion to the effective consumption and takes place in counter-current for an effective and complete regeneration of the resins. Dry salt vat The salt vat works dry and is filled only at the time of regeneration. This ensures that salt bridges do not form and reduces the risk of uncontrolled water leakage. Furthermore, the float that controls the filling is not under pressure during the operation of the softener, further reducing the risk of uncontrolled water leakage. Safety BravoCAB softeners are supplied complete with by-pass. Furthermore, BravoCAB carries out a regeneration at most every 4 days. The maintenance of statistical and programming data even in the event of a power outage is ensured by a permanent non-volatile memory. BravoCAB complies with current Italian regulations on the treatment of water intended for human consumption. BravoCAB is equipped with a backlit LCD display that is easier to read and ideal for applications in semi-underground or poorly lit locations. Programming and setting up is quick and easy: just set the time and water hardness. The display shows: time, hardness, regeneration time, residual capacity percentage, hourly flow rate, total daily consumption and average daily consumption. The electronics is also equipped with a diagnostic function which allows you to monitor the days of operation, the number of regenerations, the control of the volumetric turbine and the microswitch. BravoCAB softeners are equipped with by-pass with built-in hardness calibrator. It is made entirely of food-grade plastic. BRAVOCAB Water softener with cabin Page 3 can be assembled with the aid of clips only. None of the parts in contact with the softened water are made of metal, eliminating the risk of corrosion with the consequent release of metals into the water. Testing of BravoCAB softeners is included. Salt is excluded from the supply of the softener. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Gel Series Self-Cleaning Filter Desander With Cyclone Washing Depura Cyclon Technical features Model : Depura Baby Cyclon 1/2" Attacks: In-Out: 1/2 f Scar.: 10 mm Material: Head: Oct Vase: SAN Cartridge: Stainless steel Um: 90 Dimensions (lxh): 8 x 18.5 cm NP: 10 bars Flow rate: 1.1 m3/h Use: tec/pot Water temperature: 5-40°C Ambient temperature: 5-50°C Model : Depura Baby Cyclon 3/4" Attacks: In-Out: 3/4 f Scar.: 10 mm Material: Head: Oct Vase: SAN Cartridge: Stainless steel Um: 90 Dimensions (lxh): 8 x 18.5 cm NP: 10 bars Flow rate: 1.1 m3/h Use: tec/pot Water temperature: 5-40°C Ambient temperature: 5-50°C Gel Series General characteristics The water normally used in civil and industrial water systems contains a certain quantity of solid impurities of various nature in suspension, such as sand, rust, etc. These particles, with diameters ranging from a few microns to a few millimetres, are often the cause of damage and corrosion to water systems, taps and household appliances. To solve the problem it is necessary to install a filter upstream of the plant or equipment to be safeguarded. There are different types of safety filters: anti-flooding filters, manual self-cleaning cartridge filters and automatic self-cleaning cartridge filters. Depura Cyclon Baby - Characteristics The Depura Cyclon Baby are self-cleaning safety filters, manual, with cyclone washing and in-line connections. For civil, technical and industrial use, these filters are used when sand or other suspended particles make the installation of a traditional filter or a self-cleaning one inappropriate. Periodic washing with water turbines (cyclone) keeps the filter cartridge clean. The Depura Cyclon Baby consist of a brass head, a SAN plastic vessel and a micro-stretched stainless steel washable mesh filter cartridge with a 90µm filtration degree. The above equipment is made with top quality materials, certified for food use (DM 174/2004). Depura Cyclon Baby - Installation: Depura Cyclon Baby must be installed by qualified personnel, in a dry place protected from frost and sunlight During installation, be careful not to cause knocks so as not to damage the bowl. Connect the filter to the pipes using cylindrical thread fittings. Install the filter upright. The flow direction must respect the direction of the arrows placed on the filter head. Do not install the filter in situations which could generate depressions in the water mains. Always provide a by-pass system with valves, check valve sampling cocks. Check that the technical characteristics of the filter indicated in the table correspond to the required operating conditions. In the presence of high and/or pulsating network pressures, install a pressure reducer and a water hammer absorber before the filter. For applications for potable use, after having installed the filter, disinfect the system. Screw the jar onto the filter head using the ring nut. Depura Cyclon Baby - Maintenance Periodically wash the filter with water turbines (cyclone) by turning the cleaning tap by 90° for 10/15 seconds. Clean the bowl and cartridge using soap and clean, clear potable water. Before disassembling the cartridge to wash or replace it, exclude the filter from the system by closing the stop valves and opening the by-pass valve. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Attention ! minimum order quantity: 5 bags Product features : Model: ITALKALI Weight : 25Kg Height : 57cm Width : 37cm Depth : 12cm Technical features Salt crystals with a very high content of sodium chloride. The various sizes of the crystals are specially designed for a slow and constant dissolution low in calcium magnesium, to achieve the natural and efficient regeneration of the resins of your water softener

Read more less

Undersink Water Purifier Midea Comfee CWPJ600 flow rate up to 1.5 l/min Technical features Model : CWPJ600 Purifier with flow rate up to 1.5 litres/min Color: White with anthracite front Model: MRC1882-600G Without tank Water purification efficiency: 2:1 RO membrane flux: 600G Filter level: 5 Flow rate (l/min): 1.5 litres Water pressure range (Mpa): 0.1-0.4Mpa Installation method: under sink Outlet temperature: room temperature water Nominal net water volume: 3500 litres Filter principle: reverse osmosis Dimensions (mm): 383*138*413 Product net weight (kg): 9.1 kg Rated power: 85W Temperature range: 4-38°C Filtration stages PP - dust, sediment, sand, rust ACTIVATED CARBON chlorine and microorganisms RO – viruses, bacteria and heavy metals UF - bacteria, colloids, microorganisms General characteristics: This water purifier has a flow rate of 600G and a water flow rate of up to 1.5L/min; 5-level fine filtration and a dual water outlet design to meet the water needs of different situations. The net wastewater ratio is 1.5:1, the net water production rate is more than 60%, and first-class water efficiency is achieved. The patented water-saving membrane is adopted to improve the water production rate while saving energy and water. The recommended replacement cycle of RO reverse osmosis filter element does not exceed 24 months, and the recommended replacement cycle of PCB filter element does not exceed 12 months. 138mm slim body reduces space occupation. The filter element adopts side drawing design, which is convenient for self-replacement of the filter element. In addition, there is a side signal light to facilitate observation of the running status of the machine and the life of the filter element. Wi-Fi is supported and water quality and filter life can be checked via a mobile phone. You can drink fresh water in just 1 minute. RO reverse osmosis filter element, the filtration is more efficient and is more reliable to use. Multiple noise reduction design, keep away from the hidden danger of water leakage and protect the health of family members. Product Warranty: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

nb: product available in 5 working days Anti-limescale water softener Idropro ECO by Kalki 10" Jumbo 360851 Model Model IDRO-PRO ECO 10” CWSR/0,3 GAS CONNECTIONS 1” DIMENSIONS 196x374 CAPACITY 250 l/h Pieces per box 1 pc IDROPRO by Kalki IDROPRO can be considered the best because there are no changes in the treated water and in the quantity of total dissolved salts as it does not remove or add anything to the water itself. Not being an ion exchange treatment, like traditional softeners, the quality and total of the salts dissolved in the water remain unaltered. Preserving the natural state and not adding any chemical compound, it ensures that the calcium and magnesium content, important for the correct functionality of our body, remains in the water, allowing it to be drunk complete with all its minerals. The PH value of the water remains unchanged and this factor means that the treated water is suitable for many uses and there is no formation of corrosive phenomena. The calcium ions that cause scale are passed through a bed of electronically charged ceramic beads and are then transformed into calcium crystals. Crystalline calcium cannot bind to magnesium and therefore precipitate, creating limestone. When these crystals assume a certain size, they detach from the ceramic spheres, are released into the water and are stopped by the post filter. Once the surface is dry, there may be a film of calcium crystals (which is not limescale) which can be easily removed with a household cloth. Idropro not only inhibits the formation of limescale but also helps to remove previous residues accumulated over time along the pipes. During the process, Idropro interacts with the calcareous surface present, producing particles of Co2 and forming micro bubbles which contribute to the reduction of the bacteria present. Therefore it also acts as a bacteriostatic agent in closed spaces, boilers, pipes, ravines. DOMESTIC APPLICATIONS Pipes, showers, toilets, dishwashers, washing machines, dishwashers, ice makers, kettles, water dispensers. CONDOMINIUM AND INDUSTRIAL APPLICATIONS Boilers, central heating systems, boilers, air conditioning systems, humidifiers for environments, nebulizers for bars and restaurants, solar panels, water cooling systems, car washes, laundries, both domestic and professional tea or coffee machines. The post filter cartridge will need to be replaced once a year or every six months depending on the degree of saturation. The Idropro system is effective only for the treatment of drinking water. Advantages of Idropro IT DOES NOT REQUIRE the use of salt for regeneration PREVENTS the formation of limescale REMOVES calcium sediments EXISTING from pipes Extremely low maintenance costs DOES NOT REQUIRE chemicals for disinfection IT IS COMPACT IN SIZE and EASY to install Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AcquaBrevetti cabinet softener mod. BRAVOCAB 22 cod. CD10422 Resin volume 22 litres In/Out connections 1” F Nominal flow rate m3/h 1.6 Peak flow rate (P=1 bar) m3/h 2.0 Exchange capacity m3x° 89 – 155 - 183 Min/max pressure bar 1.5 - 9 Min/max water temperature °C 5 – 50 Supply voltage V – Hz 220/24V – 50/60 Hz Dimensions HxWxD 1090x940x402 (total with bypass) BRAVOCAB 11 Purpose of the system One of the crucial problems in plumbing and heating systems is represented by the formation of limescale deposits caused by the hardness of the water. Limescale deposits on pipes, boilers and water heaters, clogging them, reducing their efficiency, increasing energy costs and maintenance costs. Furthermore, limescale deposits on tubs and showers, sinks, taps, creating unsightly stains. But that's not all: hard water does not allow you to wash skin and clothes well due to the deposit of encrusting salts which, moreover, require the use of a greater quantity of detergents and soaps. Softening is the technology that currently offers the greatest guarantees of success in the prevention of limescale deposits. Principle of operation The BravoCAB softeners contain ion exchange resins which selectively retain the calcium and magnesium ions (responsible for the formation of scaling) releasing sodium ions into the water. A special valve (hardness regulator) allows you to modulate the hardness value at the outlet of the softener itself. Once the exchange capacity is exhausted, the exchange resins are regenerated using sodium chloride (salt). BravoCAB softeners are fully automatic and independently manage the work and regeneration phases. Advantages of softening Why would I need a water softener? Save up to 25% on energy costs. Cost reduction for repairs and maintenance. No limescale stains on taps, shower cubicles, walls. Stop encrustations on pipes, appliances and boilers. Reduction in the consumption of detergents up to 50%. Softer, healthier skin and hair. More softness for clothes and sheets. Main features BravoCAB is a cabinet softener designed to reduce water hardness by safeguarding domestic plumbing and heating systems, steam generators and cooling systems, humidification systems, washing machines and laundries, process water systems. Thanks to the technical design and the registered patents, the BravoCAB water softeners combine intelligent operation with great simplicity, allowing water and salt consumption to be kept to a minimum. The BravoCAB softeners are distinguished from the other softeners available on the market for some salient characteristics. Simplicity The softener valve can be disassembled with bare hands and in a few moves; it is made of certified food-grade plastic and consists of 30% fewer pieces than other commercially available valves. The valve is mounted directly on the rotor without the aid of mechanical connections. No part of the valve, especially those in contact with the softened water, is made of metallic materials, excluding corrosion problems with the consequent release of metals (copper, zinc, lead) into the water. The extremely innovative electronics are reliable and simple to program: in a few seconds and by pressing just two buttons, the system is put into operation. There is no need to run tests or start special procedures. Variable regenerative level BravoCAB is able to use resins with different regenerative levels which are established in a completely automatic and intelligent way by the electronics on the basis of real consumption. In this way the softener automatically adjusts itself to the specific needs of the user, consuming only the strictly necessary salt and water. This guarantees salt savings of up to 47% and water savings of up to 50% compared to a softener with a fixed regeneration level. Efficiency The regeneration of the resins is carried out in proportion to the effective consumption and takes place in counter-current for an effective and complete regeneration of the resins. Dry salt vat The salt vat works dry and is filled only at the time of regeneration. This ensures that salt bridges do not form and reduces the risk of uncontrolled water leakage. Furthermore, the float that controls the filling is not under pressure during the operation of the softener, further reducing the risk of uncontrolled water leakage. Safety BravoCAB softeners are supplied complete with by-pass. Furthermore, BravoCAB carries out a regeneration at most every 4 days. The maintenance of statistical and programming data even in the event of a power outage is ensured by a permanent non-volatile memory. BravoCAB complies with current Italian regulations on the treatment of water intended for human consumption. BravoCAB is equipped with a backlit LCD display that is easier to read and ideal for applications in semi-underground or poorly lit locations. Programming and setting up is quick and easy: just set the time and water hardness. The display shows: time, hardness, regeneration time, residual capacity percentage, hourly flow rate, total daily consumption and average daily consumption. The electronics is also equipped with a diagnostic function which allows you to monitor the days of operation, the number of regenerations, the control of the volumetric turbine and the microswitch. BravoCAB softeners are equipped with by-pass with built-in hardness calibrator. It is made entirely of food-grade plastic. BRAVOCAB Water softener with cabin Page 3 can be assembled with the aid of clips only. None of the parts in contact with the softened water are made of metal, eliminating the risk of corrosion with the consequent release of metals into the water. Testing of BravoCAB softeners is included. Salt is excluded from the supply of the softener. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AcquaBrevetti cabinet softener mod. BRAVOCAB 17 cod. CD10417 BRAVOCAB 17 Purpose of the system One of the crucial problems in plumbing and heating systems is represented by the formation of limescale deposits caused by the hardness of the water. Limescale deposits on pipes, boilers and water heaters, clogging them, reducing their efficiency, increasing energy costs and maintenance costs. Furthermore, limescale deposits on tubs and showers, sinks, taps, creating unsightly stains. But that's not all: hard water does not allow you to wash skin and clothes well due to the deposit of encrusting salts which, moreover, require the use of a greater quantity of detergents and soaps. Softening is the technology that currently offers the greatest guarantees of success in the prevention of limescale deposits. Principle of operation The BravoCAB softeners contain ion exchange resins which selectively retain the calcium and magnesium ions (responsible for the formation of scaling) releasing sodium ions into the water. A special valve (hardness regulator) allows you to modulate the hardness value at the outlet of the softener itself. Once the exchange capacity is exhausted, the exchange resins are regenerated using sodium chloride (salt). BravoCAB softeners are fully automatic and independently manage the work and regeneration phases. Advantages of softening Why would I need a water softener? Save up to 25% on energy costs. Cost reduction for repairs and maintenance. No limescale stains on taps, shower cubicles, walls. Stop encrustations on pipes, appliances and boilers. Reduction in the consumption of detergents up to 50%. Softer, healthier skin and hair. More softness for clothes and sheets. Main features BravoCAB is a cabinet softener designed to reduce water hardness by safeguarding domestic plumbing and heating systems, steam generators and cooling systems, humidification systems, washing machines and laundries, process water systems. Thanks to the technical design and the registered patents, the BravoCAB water softeners combine intelligent operation with great simplicity, allowing water and salt consumption to be kept to a minimum. The BravoCAB softeners are distinguished from the other softeners available on the market for some salient features. Simplicity The softener valve can be disassembled with bare hands and in a few moves; it is made of certified food-grade plastic and consists of 30% fewer pieces than other commercially available valves. The valve is mounted directly on the rotor without the aid of mechanical connections. No part of the valve, especially those in contact with the softened water, is made of metallic materials, excluding corrosion problems with the consequent release of metals (copper, zinc, lead) into the water. The extremely innovative electronics are reliable and simple to program: in a few seconds and by pressing just two buttons, the system is put into operation. There is no need to run tests or start special procedures. Variable regenerative level BravoCAB is able to use resins with different regenerative levels which are established in a completely automatic and intelligent way by the electronics on the basis of real consumption. In this way the softener automatically adjusts itself to the specific needs of the user, consuming only the strictly necessary salt and water. This guarantees salt savings of up to 47% and water savings of up to 50% compared to a softener with a fixed regeneration level. Efficiency The regeneration of the resins is carried out in proportion to the effective consumption and takes place in counter-current for an effective and complete regeneration of the resins. Dry salt vat The salt vat works dry and is filled only at the time of regeneration. This ensures that salt bridges do not form and reduces the risk of uncontrolled water leakage. Furthermore, the float that controls the filling is not under pressure during the operation of the softener, further reducing the risk of uncontrolled water leakage. Safety BravoCAB softeners are supplied complete with by-pass. Furthermore, BravoCAB carries out a regeneration at most every 4 days. The maintenance of statistical and programming data even in the event of a power outage is ensured by a permanent non-volatile memory. BravoCAB complies with current Italian regulations on the treatment of water intended for human consumption. BravoCAB is equipped with a backlit LCD display that is easier to read and ideal for applications in semi-underground or poorly lit locations. Programming and setting up is quick and easy: just set the time and water hardness. The display shows: time, hardness, regeneration time, residual capacity percentage, hourly flow rate, total daily consumption and average daily consumption. The electronics is also equipped with a diagnostic function which allows you to monitor the days of operation, the number of regenerations, the control of the volumetric turbine and the microswitch. BravoCAB softeners are equipped with by-pass with built-in hardness calibrator. It is made entirely of food-grade plastic. BRAVOCAB Water softener with cabin Page 3 can be assembled with the aid of clips only. None of the parts in contact with the softened water are made of metal, eliminating the risk of corrosion with the consequent release of metals into the water. Testing of BravoCAB softeners is included. Salt is excluded from the supply of the softener. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less