Technical features Model Product code ESOFM10 EKOSOFT M09 cabinet model Nominal range 800 Connections 1"M Dimensions mm base: 320 x 500 height 675 mm Equipped with digital display (backlit), automatic disinfection, by-pass for water hardness adjustment. EKOSOFT softeners are supplied in the space-saving cabin version (monobloc with lid). General characteristics EKOSOFT EUROAQUE SOFTENER Operation Regeneration is fully automatic in five stages and takes place on the day and time selected by the user. During regeneration, the softener automatically enters BY-PASS thus guaranteeing the supply of water to the user. Principle Ion exchange with sulfuric-type resins in sodium cycle with macroporous structure. Advantages Soft skin and hair more docile to combing. Sharp decrease in kidney stones. There is no need to dry dishes, glasses, cutlery and cars as limescale deposits are totally eliminated. Furthermore, washed clothes will be softer in the absence of calcium that infiltrates the fabrics, and the colors will remain alive. Food will cook faster and better, boiled meats will be more tender and less fibrous, cooked vegetables will have their natural colour, tea and coffee will regain their true flavour, softened water is ideal for bathing because the absence of calcium favors the respiration of the pores of the skin and scalp. The Water Troubles The troubles caused by water can be summarized in: lime scale, deposits and corrosion. Limescale encrustations lead to an obstacle in the heat exchange and consequently to a waste of energy when not to a rapid blockage of the pipes. They can also cause breakage or failure of the metal in the points of greatest heat exchange with the consequent need to replace system components. The deposits, in addition to the above, cause localized corrosion. Shiny crockery Are you tired of seeing your dishes marked or stained after washing? Descaled water eliminates this problem and at the same time increases the life of your dishwasher. Hand guards The cause of red and worn hands is generally due to calcareous water. The decalcified water caresses and does not irritate. Boiler protection Descaled water prolongs the life of your boiler and reduces scale build-up from hard water minerals. It also saves you money. Less energy (17% to 21%) is required to heat water in a boiler fed with decalcified water. Pipe protection After a certain period of time, deposits form which eventually block the pipes. When pipes are clogged, water flow is slower and water pressure can be drastically reduced. A water descaling system can reduce this effect. Tap protection Hard water deposits corrode and clog the valves of equipment in contact with water. This shortens the lifetime of the installations, causing unnecessary expenditure of money. Skin protection Say goodbye to irritation caused by shaving because from now on the razor will glide very smoothly over your face with decalcified water. Both the leather and the razor blades will retain their longevity. Body cooler Pour decalcified water into the bath or shower and you will feel a different freshness. You'll be cleansed faster and with less soap residue on your skin. You will come out more relaxed and refreshed than ever. Salvation for the hair A shampoo with fresh water restores shine to your hair which will also be more shiny and manageable. Stain removal When bathroom installations benefit from decalcified water, you will no longer have unsightly scale around taps, stains, dirt or mineral deposits that blacken your porcelain and sadden your days. Easier cleaning Washing floors, tiles and wooden surfaces becomes easier and faster with decalcified water because this water eliminates the scum and soap scum created by hard water. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

General Features Brand: Europacque Model: Europe EAN: 8054602010303 Code: M30 Dimensions: 32X48X112 cm Capacity: 2000 litres/hour Cyclic: 156 Technical Data Sheet Exchange Type: Ionic Type of use: Domestic Treatment type: Drinking water Type of compatible water: Water compliant with Legislative Decree 31/2001 Resin regeneration. Automatic Description How to use The equipment works on the principle of ion exchange by means of synthetic food resins sodium cyclohexane. These resins have the property of absorbing the excessive quantity of calcium and magnesium salts present in the water. The equipment must be used on waters compliant with Legislative Decree 31/2001. For use on non-compliant waters, consult our specialized consultants. The regeneration of the resins is completely automatic. During regeneration, the softener automatically enters By-pass, thus ensuring the supply of water to the user. Technical features: The softener is made up of 3 main elements (2-body softener) 1) CYLINDER: Cylindrical fiberglass column containing resins. 2) VALVE: Automatic component that controls the following progressive work cycles. - Production of softened water (hardness level adjustable according to need); - Backwashing; - Slow rinsing of resins; - I replenish water in the salt vat. All the work phases described are carried out at each regeneration (which can take place, depending on the model of water softener, by time or by water volume). 3) TINO: Polyethylene container for preparing the brine. NB IN THE CASE OF A CABIN WATER SOFTENER (SPACE-SAVING) THE TAN IS REPLACED BY A CABIN WITH LID CONTAINING CYLINDER, VALVE AND SPACE REQUIRED FOR INSERTING SALT AND PREPARATION OF BRINE. The materials constituting the equipment comply with the provisions set out in the ministerial decree of 6 April 2004, n. 174. Together with those used by Euroacque, installation and maintenance must also be carried out using compliant material. Installation Plumbing systems made for the installation of a water softener must be equipped with: non-return valve system capable of ensuring that treated water does not return to the network of a manual or manual system automatic, bypass and shut-off valves that allow the supply of untreated water, excluding the one treated. These systems are necessary in the event of any faults present on the softener so as not to interrupt the supply. of sanitary water. The following points are highlighted: 1. The equipment must be installed in hygienically suitable environments and, where relevant, in compliance with the provisions set forth in the decree of the Minister for Economic Development dated 22 January 2008, n.37, including those relating to testing and maintenance. 2. The installation of the equipment in line with the drinking water distribution system must be carried out with bypass valves to ensure that the user can exclude the use of the equipment without this result in interruption of the drinking water supply service.

Read more less

General characteristics Brand: Europaque Model: Europe EAN: 8054602009949 Code: M20 Dimensions: 32X48X112cm Capacity: 2000 litres/hour Cyclic: 102 Data sheet Exchange type: Ionic Type of use: Domestic Type of treatment: Drinking water Type of compatible waters: Waters compliant with Legislative Decree. 31/2001 Regeneration of resins. Automatic Description How to use The equipment works on the principle of ion exchange by means of synthetic food resins in sodium cycle. These resins have the property of absorbing the excessive quantity of calcium and magnesium salts present in the water. The equipment must be used on waters compliant with dl. 31/2001. For use on non-compliant waters, consult with our specialized consultants. The regeneration of the resins is completely automatic. During regeneration, the softener automatically enters By-paa thus guaranteeing the supply of water to the user. Technical features: The softener is composed of n. 3 main elements (2 bodies softener) 1) CYLINDER: Cylindrical column in fiberglass containing resins. 2) VALVE: Automatic component which controls the following progressive work cycles. - Production of softened water (degree of hardness adjustable according to need); - Backwashing; - Slow rinsing of the resins; - Replenishing water in the salt vat. All the work steps described are carried out with every regeneration (which can take place, depending on the model). softener, by time or by water volumes). 3) TINO: Polyethylene container for the preparation of the brine. NB IN THE CASE OF A CABIN SOFTENER (SPACE SAVER) THE TANK IS REPLACED BY A CABIN WITH LID THAT CONTAINS CYLINDER, VALVE AND SPACE REQUIRED FOR INSERT SALT AND BRINE PREPARATION. The materials constituting the equipment comply with the provisions set out in the ministerial decree of 6 April 2004, no. 174. Together with those used by Euroacque, installation and maintenance must also be carried out using compliant material. Installation Plumbing systems made for the installation of a water softener must be equipped with: system of non-return valves able to ensure that the treated water does not return to the network of a manual system or automatic, bypass and shut-off valves that allow the delivery of untreated water, excluding the one treated. These systems are necessary in the face of any faults present on the softener in order not to interrupt the supply of sanitary water. The following points are emphasised: 1. The equipment must be installed in hygienically suitable environments and, where pertinent, in compliance with the provisions established by the decree of the Minister of Economic Development of 22 January 2008, n.37, including those relating to testing and maintenance. 2. The installation of the equipment in line with the potable water distribution system must be carried out with bypass valves to guarantee the user the possibility of excluding the use of the equipment without this lead to interruption of the drinking water supply service.

Read more less