Sime MURELLE HT 30 Wall-mounted Condensing Boiler Class A 8115107 LPG Complete With Flue Gas Kit Included General characteristics Brand: Sime Model: MURELLE HT 30 Power supply: LPG Code: 8115107 Technical data sheet Domestic hot water thermal power kW: 2.1÷29.5 Heating thermal power (50-30°C) kW: 2.17÷31.8 Sanitary flow rate (EN 13203) l/min: 14.0 Heating energy efficiency class: A Heating sound power dB(A): 52 Health energy efficiency class: A Declared load health profile: XL Weight kg: 34.0 Dimensions Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from date of purchase.

Read more less

BOX NOT INCLUDED IN THE PRICE JUNKERS BOSCH CERAPUR CONDENSING BOILER BUILT-IN CONDENSING ZWB 28-1 EI 24 kW INCLUDING SMOKE KIT - NEW ErP ErP energy class (Heating and ACS) For heating and domestic hot water production Nominal heat output in domestic hot water kW 28 Nominal heat output (heating) 40/30 °C: 25.7 kW Nominal heat output (heating) 80/60 °C: 24.0 kW Minimum heat output (domestic hot water): 7.4 kW Sanitary flow rate ΔT = 30 K: 13.4 l/min NOx class: 5 Voltage v(AC): 230 Frequency HZ: 50 Electrical power consumption: 230 W IP Protection Grade: X5D Dimensions: 243 x 533 x 775; 47 Kg As standard: Controllable from home - Manage the boiler directly from inside the home, using the TF 25 remote control , supplied as standard Junkers Bosch With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP (energy related products) Directive which specifies the minimum eco-design requirements for energy-using equipment, including energy efficiency. The heating world will also be affected by this revolutionary change. In fact, from 2015, the energy efficiency of boilers will be based on new performance indices that will take seasonal performance into account. Among the most significant changes in the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation even at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the efficiency level calculated over the course of an entire year. CerapurIncasso CERAPUR INCASSO is designed for concealed installations and encloses maximum convenience in just 250 mm of depth. Ideal for solving space problems, it does not alter the aesthetic beauty of homes. CERAPUR INCASSO in fact integrates perfectly into the facade thanks also to the possibility of painting the "shell" the same color as the wall. Boiler for concealed installations - Space saving inside the home and no aesthetic impact on the outside thanks to the installation in a niche in the wall Controllable from inside the home - Management of the boiler directly from inside the home, using the TF 25 remote control, supplied as standard Robust and reliable - Robustness and reliability of the boiler are guaranteed thanks to the construction of the primary exchanger in aluminium alloy Electrical insulation - The boiler has an electrical insulation rating of IPX5D Characteristics: Outdoor condensing wall-mounted boilers with DHW production that can be combined with solar thermal systems for DHW using Solar Kit. Certifications obtained of type C13, C33, C63, C83, B33. Suitable for use with Ø 60 mm drains. Emissions in class 5 as foreseen by the UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation indicated in a specific niche, dedicated to the built-in shell (acc. 978). Automatic antifreeze function up to an external temperature of -15 °C, both on the domestic hot water and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (sanitary and heating). Patented high efficiency aluminum-silicon alloy primary heat exchanger. Larger plate heat exchanger for domestic hot water condensation. 6 litre heating side expansion vessel. Circulator in Energy Class A. Accessories Built-in Box for Boilers: CALD_0021210 Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Sime MURELLE HT 25 Wall-mounted Condensing Boiler Class A 8115106 LPG Complete With Flue Gas Kit Included General characteristics Brand: Sime Model: MURELLE HT 25 Power supply: LPG Code: 8115106 Technical data sheet Sanitary thermal power kW: 1.75÷24.5 Heating thermal power (50-30°C) kW: 1.81÷26.4 Sanitary flow rate (EN 13203) l/min: 11.4 Heating energy efficiency class: A Heating sound power dB(A): 51 Health energy efficiency class: A Declared load health profile: XL Weight kg: 32.4 Dimensions Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from date of purchase.

Read more less

Overview JUNKERS CERAPUR BALCONY ZWB 28-1 EB CONDENSING BOILER for outdoor use COMPLETE WITH FUME KIT - NEW ErP 2016: Wall mounted condensing outdoor boiler with DHW production, combinable with solar thermal systems for DHW using Solar Kit.. Technical specifications Heating and DHW energy efficiency class (ErP): A/A For heating and domestic hot waterÿ Loaded profiles declared XL Nominal heat input (heating): 24.6 kW Nominal thermal power (sanitary): 28 kW Nominal heat input (sanitary): 28.6 kW Thermal efficiency at nominal power 40/30°C: 104.3% Efficiency thermal useful at 30% nominal load 40/30°C: 109.2% Continuous sanitary production: 13.4 l/min Sanitary temperature range that can be set: 40/60°C NOx class: 5 Absorbed electric power: 230 W Degrees of protection: IP X5D Dimensions (D x W x H):ÿ285 x 535 x 775ÿmm; 54kg Version:ÿMETHANEÿ Main features CERAPUR BALCONY Wall-mounted condensing boiler for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Small and compact,ÿCERAPURÿBALCONY has been designed to solve space problems and resist bad weather, while ensuring maximum comfort in the production of heat and domestic hot water. Advantages: Wall-mounted condensing boilers for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Certifications achieved of tipC13, C33, C63, C83, B33. Suitable for use with 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation. We will remotely control the digital room chronothermostat with the following functions: two fixed heating programs P1 and P2; a programmable P3 heating program with 22 available time slots; setting of the operating temperatures both in heating and in DHW; display of boiler operating status and any anomalies; in combination with the external probe (accessory) the functioning as a climatic control unit is activated which automatically regulates the delivery temperature according to the external temperature. Automatic antifreeze function up to an external temperature of -15°C, on both the sanitary and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW heating). Primary heat exchanger in patented high efficiency aluminosilica alloy. Domestic hot plate heat exchanger for condensing also in DHW. 6 liter heating expansion tanks. Circulator in Energy Class A. The ErP legislation and the new energy labels The future of heating systems Starting fromÿ26 September 2015ÿthe heating systems and for the production of hot water, in order to be placed on the market, will have to comply with theÿErPÿ (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiencyÿ of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding underperforming technologies from the market. The energy labelÿwill be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allow him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements.ÿ In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, the task of whoever builds/installs the system is to provide the consumer with the correct explanatory label . The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are currently incentivized at the tax level. Junkers Boschÿ already in line with the dictates of the ErP legislation, represent a future that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Sime MURELLE HT 25 Wall-mounted Condensing Boiler Class A 8115101 Methane Complete With Flue Gas Kit Included General characteristics Brand: Sime Model: MURELLE HT 25 Power supply: Methane Code: 8115101 Technical data sheet Sanitary thermal power kW: 1.75÷24.5 Heating thermal power (50-30°C) kW: 1.81÷26.4 Sanitary flow rate (EN 13203) l/min: 11.4 Heating energy efficiency class: A Heating sound power dB(A): 51 Health energy efficiency class: A Declared load health profile: XL Weight kg: 32.4 Dimensions Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from date of purchase.

Read more less

Technical features Model : Victrix Zeus 32 Product code : 3.028382 Energy class in heating: A Sanitary energy class: A Load prifle : XL Maximum nominal heat input in DHW: 33.1 kW Maximum nominal heat input in heating mode: 29.0 kW Minimum nominal heat input: 4.3 kW Maximum useful thermal power in DHW: 32 kW Maximum useful thermal power in heating: 28 kW Minimum useful thermal power: 4.0 kW Useful thermal efficiency at 100% Pn (80 / 60 °C): 96.6% Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) : 100.4% Minimum gas flow rate to the burner: 0.45 m 3 /h Maximum gas flow rate to the burner: 3.50 m 3 /h Weighted CO : 19 mg/kWh Weighted NO X : 38 mg/kWh Power supply: methane / LPG NO x class : 6 Minimum suction/exhaust available head: 2 Pa Maximum suction/exhaust available head: 250 Pa Nominal heating expansion vessel capacity: 10 litres Electrical protection degree : IPX5D Dimensions and weight Dimensions (HxWxD): 900x580x410 mm Empty weight: 65.5 kg Immergas Victrix Zeus Comfort and design in a small space The new VICTRIX ZEUS are condensing and total premix boilers with stainless steel boiler, compact dimensions and new design, completely renewed With 25 and 32 kW of power , they are designed for new installations, but the identical hydraulic connections compared to the previous models and the standard connection group, favor installers in replacements . In addition, the condensing module with large section stainless steel coil reduces the risk of clogging and the low-consumption circulator allows for considerable savings in electricity Thanks to the electronic card that modulates the boiler power up to 17%, high yields are obtained with a consequent reduction in gas consumption . VICTRIX ZEUS, which can also be installed outdoors in protected places such as under the balcony, can be fed with any type of fuel (methane/LPG or propane air), which is why they are supplied with a single product code In addition to allowing the fumes to be discharged from the wall in the cases envisaged by Legislative Decree 102 of 4 July 2014, the VICTRIX ZEUS are in the most ecological class of the European classification ( class 6 ) for low emissions of carbon monoxide (CO) and nitrogen oxides (NOx). For ease of use by users, the interface with LCD display and knobs, offers simple and fast adjustments and settings Formula Comfort 10 It benefits from the most comprehensive maintenance program lasting 10 years with no activation costs , with the possibility of extending it up to 15 years . In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check Smartech Plus Home temperature is now smart Evolution advances rapidly with the new Immergas SMARTECH PLUS digital chronothermostat: now the heating system communicates in the most immediate way with the home and those who live there also via smartphone and computer, comfort increases and consumption is under control SMARTECH PLUS is the intelligent chronothermostat with Bluetooth technology, which allows you to adjust the heating temperature through a dedicated app. Thanks to the geolocation system , it connects to smartphones and lets you know when no one is home or if even just one member of the family returns, in order to set the desired temperature It is compatible, for some functions, with the virtual assistants Alexa and Google Home The advantages of Smartech Plus • Remote adjustment With the display or remotely with the dedicated app (internet or Wi-Fi connection required) • Switching on and off At time slots or with the geolocation of family members on the app • Complete control of operation, consumption, modification of parameters and display of anomalies on the website • Easy to use and read Perfect visibility with e-ink technology of digital readers, consumes very little and runs on batteries that last even more than 2 years • Up to 18 thermostats With the app you can manage up to 18 smart thermostats in different homes 45 liter stainless steel boiler The stainless steel guarantees the inalterability of the boiler to the action of the water and the wide flange optimizes cleaning and maintenance operations. Inside the boiler there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange Multiple withdrawals of domestic hot water The capacity of the stainless steel boiler, combined with the excellent temperature regulation, have made it possible to obtain the marking, i.e. maximum sanitary performance, guaranteeing high comfort even with simultaneous withdrawals of domestic hot water Sanitary expansion tank as standard Approved for outdoor use Thanks to the new insulation that equips the stainless steel boiler and the standard protection down to 0 °C, the VICTRIX ZEUS boilers can be installed outdoors in a partially protected place. With an appropriate optional kit it is possible to extend it down to -15 °C (in the presence of electricity and gas). The degree of electrical insulation is IPX5D Primary exchanger in stainless steel The primary exchanger that equips the VICTRIX ZEUS is made with a single-tube exchange coil in stainless steel . The absence of collectors and circuits in parallel guarantees maximum reliability over time : there are no weldings. The single stainless steel spiral without bottlenecks allows for a perfectly balanced hydraulic circuit, considerably reducing pressure drops . The internal section, wide and constant , allows to limit deposits, reducing the risk of clogging in the case of impurities present in the water, in the case of replacing boilers on dated systems Due to this peculiarity, the VICTRIX ZEUS are ideal for replacement "Green series" plug-in flue The VICTRIX ZEUS have a dedicated series of air intake/fume exhaust kits made in such a way as to guarantee high resistance to corrosion and considerable speed and functionality during installation, thanks also to the plug-in coupling system and sealing gaskets. held in special material. VICTRIX ZEUS boilers can be installed in sealed chamber and forced draft or open chamber and forced draft configuration, ideal for outdoor installation in a partially protected place Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Immergas MYTHOS HP 24 kW LPG condensing boiler complete with low NOx fume exhaust kit 3.029801 Wi-Fi Natural gas boiler code 3.029801 Energy class in heating B Sanitary energy class - Load profile A - XL Maximum nominal heat input in domestic hot water kW (kcal/h) 23.8 (20,502) Maximum nominal heat input in heating kW (kcal/h) 23.8 (20,502) Minimum nominal heat input kW (kcal/h) 9.8 (8,423) Maximum useful thermal power in domestic hot water kW (kcal/h) 22.6 (19,436) Maximum useful heat output in heating kW (kcal/h) 22.6 (19,436) Minimum useful heat output kW (kcal/h) 9.1 (7,826) Useful thermal efficiency at 100% Pn (80 / 60 °C) % 94.8 Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) % 94.7 Useful thermal efficiency at 100% Pn (40 / 30 °C) % 102.3 Useful thermal efficiency at 30% of the nominal load. (40 / 30 °C) % 100.5 Gas flow rate to the burner (methane) max/min m3 Heating expansion tank nominal capacity (total) liters 4.2 IPX 5D electrical protection degree Boiler weight full of water (empty) Kg 32.8 (30.8) Dimensions (HxWxD) mm786 x 440 x 240 Mythos HP Instant mural with heat recovery The new entry in the Immergas condensing range is specifically designed to replace traditional boilers in radiator systems, with medium-high temperatures. MYTHOS HP is designed to meet the new European Directives on the use of energy, in fact it has a traditional copper exchanger and a heat recovery unit with condensate drain siphon. It develops 24 kW of power for room heating and the instantaneous production of domestic hot water and, thanks to the reduced emissions of nitrogen oxides (NOx), it falls into class 6, the most ecological of European standards. In addition, it allows fumes to be discharged through the wall in the cases envisaged by Legislative Decree 102 of 4 July 2014. It is also the ideal boiler for replacing conventional sealed chamber and forced draft boilers connected to collective flues. MYTHOS HP is extremely compact, it finds space even in homes with limited space, it can be installed outdoors in a partially protected place or recessed in OMNI CONTAINER. The simple and essential interface consists of a central LCD display and selection buttons to adjust temperatures and operating modes. SMARTECH PLUS. CONTROL THE BOILERS REMOTELY AND SAVE The SMART hi-tech wireless chronothermostat with Bluetooth technology allows you to adjust the heating temperature even with a smartphone or tablet via a dedicated app. The switching on or off of the heating can be based, through a special function, on the geolocation of family members: the app raises the temperature when a member of the family returns home and lowers it when the last one leaves. With the app you can manage up to 18 SMART thermostats even in different homes. SMARTECH PLUS is easy to use and reads well from any angle thanks to the e-ink technology used in digital readers. It is also compatible, for some functions, with the virtual assistants Alexa and Google Home . THE ADVANTAGES OF SMARTECH PLUS Heating adjustment in time slots with the display or remotely with the dedicated app (internet connection or Wi-Fi required) Switching on and off at time slots or with the geolocation of family members on the app Control of operation, consumption, modification of parameters and display of anomalies on the website Very low consumption: it runs on batteries with an autonomy of up to more than 2 years High readability with e-ink display ê Control up to 18 SMART thermostats in different homes, via app MYTHOS HP is equipped with a copper exchanger connected to the high efficiency condensing element (heat recovery) and to a low polluting emission burner. The heat recovery unit, located downstream of the copper exchanger, is completely made of stainless steel to guarantee durability over time and maximum efficiency. It represents the condensing solution, in case of replacement of traditional generators on radiator systems that require medium-high temperatures to ensure environmental comfort. MYTHOS HP cannot be installed with direct delivery to low temperature radiant panel systems : it is necessary to provide for an external mixing to the generator. INDOOR AND OUTDOOR INSTALLATION The boiler is approved for operation outside the home as long as it is partially protected from atmospheric agents, for example by installing it under a balcony; the degree of electrical protection is IPX5D. An electric resistance kit is available to increase the antifreeze protection from -5 °C to -15 °C (code 3.031016). The upper cover kit for installation in partially protected places is optional (code 3.019090). OPTIONAL CONNECTION GROUP FOR PENDANT INSTALLATION Pendant connection group cod. 3.015229 RECESSED INSTALLATION The built-in installation allows the boiler to be positioned outside in a niche and therefore to recover living space. The OMNI CONTAINER frame cod. 3.016991 can be supplied and installed before the boiler. The front door can also be painted the same color as the house so as to fit nicely into the aesthetics of the building. OPTIONAL CONNECTION GROUP FOR BUILT-IN INSTALLATION front and rear connection group cod. 3.016445 CARV2 (MODULATING REMOTE FRIEND COMMAND) OPTIONAL It is possible to remotely control the appliance using a modulating thermostat with remote boiler controls (optional, see page 10) which allows better climatic regulation of the room temperature. In fact, it replaces the control panel of the boiler, performing all its functions. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits. For information, contact the authorized service center in your area in advance Ferroli Bluehelix Alpha 34C condensing boiler complete with flue gas exhaust kit Methane or LPG code 0TPF7AWA Energy label specifications according to European ErP directive Heating energy efficiency Class A Energy efficiency of sanitary equipment XL profile Class A Heating/sanitary operation features: Max / min heating heat output (Hs) kW 34.1 / 5.5 Maximum sanitary heat output (Hi) kW 34.8 Max. heating operating pressure bar 3 Min. heating operating pressure bar 0.8 Heating expansion vessel capacity 10 litres Maximum sanitary operating pressure bar 9 Minimum sanitary operating pressure bar 0.3 Sanitary flow rate ∆t 25°C l/min 19.5 Degree of protection (IEC 60529) IP IPX4D Power supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x320 Bluehelix Alpha .. More beautiful than "BEFORE" The new range of generators is equipped with the proven stainless steel exchanger . Designed and built according to the new ErP directives for eco-friendly design and labelling, BLUEHELIX ALPHA is at the top of its category. TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) mod. 24 C COMBINATED (14 l/min at ∆t 25°C) The BLUEHELIX ALPHA thermal group exchanger (fig. A) compared to the more classic and widespread steel exchanger. This geometry allows the exchanger to operate almost at maximum design efficiency even in conditions of partial clogging, while with the same quantity of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig. B tends to clog much more quickly in the part in contact with the flame due to the reduced fluid passage area, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency below the nominal values BLUEHELIX ALPHA VIEW FROM INSIDE EXCHANGER Single-circuit stainless steel exchanger with high passages, resistant to clogging and easy to clean STEEL FRAME Made with high precision automated processes EXPANSION VESSEL 8 litre expansion vessel placed laterally ELECTRIC PANEL FAN Offset fan, to facilitate maintenance of the primary exchanger without disassembly DOMESTIC HOT WATER EXCHANGER In stainless steel, with copper brazing High efficiency CIRCULATOR, for heating and exchange with the sanitary circuit SEALED CHAMBER Removable steel panel protecting the combustion chamber with sealed chamber function ELECTRICAL PANEL Large removable electrical panel protects against water damage that may occur during normal maintenance. Easy access to electrical connectors. THE ENGINE The tube that makes up the BLUEHELIX ALPHA exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to scaling agents and deposits. BOILER CONTROL The BLUEHELIX ALPHA control unit consists of an easy-to-use interface with a backlit display. Using the buttons, you can easily adjust the heating flow temperature, the domestic hot water setpoint, turn the generator on/off or activate the comfort function, monitoring the boiler status. The control panel is completed by a traditional pressure gauge that can check the system pressure at any time. MC2 The electronics controls the flame ionization current to ensure optimal combustion when the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air/gas ratio itself and therefore combustion. MC2: Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use when the conditions of the gas network vary (e.g. fluctuations or reduced pressures). MGR Methane, LPG, Propane Air Ready The electronics controls the flame ionization current to ensure optimal combustion when the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air/gas ratio itself and therefore combustion. MC2: Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use when the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Thanks to the new electronics supplied, the gas change operation is extremely simple. The MC2 combustion control constantly monitors the quality of combustion and by simply modifying a parameter of the electronic board (operation to be carried out only by qualified personnel) it is possible to operate the boiler on Methane or LPG or Propane Air. It is therefore not necessary to purchase additional accessory kits. CONNECT New wireless remote control available as an accessory for managing home comfort also from a smartphone using the connect app (iOS and Android). Maximizes room comfort with modulation of the flow temperature through the Ambient Climate Compensation (CCA) and External Climate Compensation (CCE) functions via external temperature detectable directly from the internet (or from an optional external probe). Improves the average seasonal efficiency in space heating by +4%. EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can realize the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the BLUEHELIX ALPHA thermal group allows maintenance to be performed with maximum precision and speed. Some examples: - The electrical box of the electronic board can be easily extracted from the chassis leaving free access to the internal parts. - Easy access to the burner group by removing 4 screws and the quick coupling (clip) of the fan. - The extra-large passage exchanger is designed to challenge the hardest waters and is easily cleanable thanks to the single-tube, non-collector circuit. - The domestic water inlet filter can be removed very easily directly from the inside without having to remove the boiler's hydraulic connections. - The possible dismantling and replacement of the plate exchanger is done simply by removing two Allen bolts accessible from the front SUN EASY FUNCTION BLUEHELIX ALPHA has been designed to be easily inserted into systems created with the latest technologies. The SUN EASY system uses electronics that simplify the combination with both natural and forced circulation solar panels. Using a sensor placed on the sanitary circuit, it continuously monitors the temperature of the water preheated by the solar panels, providing for the ignition of the burner only in the event that the latter falls below the level necessary to guarantee optimal comfort for the user. STOP AND GO FUNCTION When using sanitary mixer taps, short or very short deliveries for quick rinses cause the boiler ignition procedure to start, which usually ends immediately. The persistence of these "false starts" can, in the long run, compromise the average life of the product. For this reason, BLUEHELIX ALPHA provides an electronics parameter through which it is possible to delay the ignition of the burner (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water. EXTERNAL INSTALLATION - ANTIFREEZE FUNCTION To make the most of the available space, the new BLUEHELIX ALPHA 24 - 28 C boiler can be installed flush with the wall using the special kit; for more critical installations, in completely uncovered places not protected from atmospheric agents, the “painted cabinet” kit is also available. If the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. ECO-COMFORT HEALTHCARE FUNCTION In ECO mode, domestic hot water production occurs according to traditional standards, allowing energy savings during periods of non-use. In COMFORT mode, thanks to the special system for maintaining the temperature of the heat exchanger, the supply of domestic hot water becomes even faster and more comfortable. The efficiency and load profiles according to the ErP directive are at the top of the category: mod. 24 C / A - XL. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less

NB: THE PRODUCT IS ARRIVAL IN THE FIRST DAYS OF NOVEMBER ARISTON CONDENSING BOILER GENUS ONE NET 30 KW METHANE COMPLETE WITH FUME EXHAUST KIT Technical features Product code: 3301114 Energy label specifications according to the European ErP directive Class A heating energy efficiency (A+ achieved thanks to thermoregulation) Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input max heating kW 28.0 Max DHW nominal heat input kW 30.0 Nominal thermal power kW 27.5 Efficiency at nominal heat input (60/80°C) 98.4% Efficiency at 30% (30°C) 109.5% DHW max/min temperature °C 60 / 36 DHW flow ∆T 25 °C (l/min) 17.2 Power supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 91 Degree of protection of the electrical system IP X5D, Dimensions 24 kW mm (HxWxD) 745 x 400 x 385 Indoor installation and partially protected places Power supply: LPG Functionality: CUBE S NET room thermostat Operation CNG, LPG and propane air without the need for kits. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu GENUS ONE NET Ariston excellence guaranteed for 10 years thanks to the Protezione 10 total assistance programme. Latest generation condensing boiler with integrated Wi-Fi and voice control. HEATING WITH MAXIMUM DURATION: XTRATECH HEAT EXCHANGER The new patented ExtraTech heat exchanger is the heart of the ONE condensing technology for heating, designed to guarantee performance with maximum durability over time. TOTAL COMFORT: COMPLETE CONTROL IS GUARANTEED EVERY DAY WITH THERMAL FUNCTIONS A unique set of innovative smart functions for a fast and stable heating temperature and easy customization able to satisfy every need. ALWAYS CONNECTED WITH ARISTON NET With Ariston NET it is possible to set, modify and control the heating, cooling and hot water temperature at any time, from your smartphone or PC, wherever you are. DISCOVER A MASTERPIECE OF ITALIAN STYLE The improved design of the ONE Series is based on innovative lines, new materials and technological user interfaces for an even more comfortable experience. The touch screen display is a solution that allows easy temperature management, while the compact structure has been redesigned with internal components and a layout designed for easy access even with reduced dimensions. With the front panel in tempered glass, scratch resistant and easy to clean, Alteas ONE is made to withstand high temperatures and to always be super safe. NEW PER4MANCE SYSTEM 4 technologies for exclusive performance: NEW XTRATECH™ EXCHANGER: MAXIMUM QUALITY. ABSOLUTE EFFICIENCY: ENERGY CLASS A+. ALWAYS CONNECTED WITH ARISTON NET. FULL CONTROL, TOTAL COMFORT. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE OPERATION OF THE METHANE OR LPG BOILER IS USED THROUGH THE STANDARD KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE nb: optional body, to be selected in related products Ariston condensing boiler CARES PREMIUM IN 30 built-in methane or LPG complete with flue kit cod. 3301232 Product code: 3301232 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Max/min rated heat input (heating) PCI: 29.0/6.0 kW Nominal heat input max/min (sanitary) PCI: 29.0/6.0 kW Max/min useful heat output (heating): 28.4/5.8 kW Efficiency at nominal heat input (60/80°C) PCI: 97.8% Efficiency at nominal heat input (30/50°C) PCI: 104% Efficiency at 30% (30°C) PCI: 108% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C DHW max/min temperature: 60-36°C Quantity of hot water (deltaT 25°C): 15.8 l/min Quantity of hot water (deltaT 35°C): 11.3 l/min Specific flow rate (first 10' with deltaT 30°C): 13.2 l/min minimum operating temperature (with antifreeze kit) -15°C Power supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 80W Degree of protection of the electrical system IP X5D Dimensions mm (HxWxD) 1140 x 590 x 240 Installation: Recessed Power supply: methane Functionality: Thermoregulation included: Sensys system manager + external probe CARES PREMIUM IN Aluminum-silicon condensing exchanger Modulation ratio 1:4 BusBridgeNet® communication protocol Sensys system manager and standard external probe Minimum operating temperature down to -20°C* Electro-galvanized coat for outdoors Smoke outlet 80, 60 mm MET/LPG operation with standard kit (model 25) Comfort function Speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last draw). Auto function Maximum comfort, efficiency and energy savings based on automatic analysis of the environmental conditions, connected external devices and required performance. System management New communication protocol designed to ensure complete system management. High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions. Extra small size Extremely small footprint to adapt to any space problem. Made in Italy Made entirely in Italy. Modulating circulation Modulating circulator for optimizing consumption and maximizing performance. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, IT IS NECESSARY TO REQUEST THE TRANSFORMATION KIT. FOR INFORMATION, CONTACT THE AUTHORIZED ASSISTANCE CENTER IN YOUR AREA IN ADVANCE Technical Features Model : EoTEC Plus VMW 236/5-3+ Product code : 0010034554 Power supply: Methane Performance Heating power: 5.2~23.0kW Rated power in sanitary mode: 5.2 ~ 23.0 kW Energy efficiency class in heating: A Energy efficiency class in sanitary ware: A Health load profile: XL NOx class : 5 Performance Stars: ★★★★ Domestic hot water production (ΔT = 30K) 11.0 l/min Domestic hot water temperature regulation: 35°C ~ 65°C Modulation : 1:5 Expansion vessel capacity: 10 litres Installation data Flue gas connection diameter: 60/100 mm Possible diameter of exhaust gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic pipe diameter: 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x338 mm Weight: 33 Kg 7-year warranty extension Wall mounted condensing boiler ecoTEC pro VMW + Reliable and flexible for Vaillant replacements on Vaillant All models in the ecoTEC pro VMW range have an efficiency etas = 94%. For this reason, if combined with a class VI thermoregulation, such as vSmart, they achieve a system efficiency of 98% and therefore the ErP system energy class in heating A+ . The ecoTEC pro VMW boiler is available in the powers of 23 kW and 28 kW. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro was designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. With the new high-efficiency pump and new electronics, ecoTEC pro consumes very little electricity, guaranteeing significant savings throughout the year. Its ease of regulation makes it the ideal boiler for all users, in addition to having an extremely simple interface with clear text and a backlit display to facilitate its use. ecoTEC pro is the ideal wall-mounted combined boiler for Vaillant-on-Vaillant replacements thanks to its ease of installation and availability of accessories. Once installed, it will win you over with its extraordinary ease of regulation The small size of ecoTEC pro VMW allows it to be installed in any environment: 70cm height 44cm width 35cm depth Identical to the previous version Control your heating with your smartphone Thanks to its free App, vSMART represents a new approach to home efficiency, transforming smartphones or tablets into remote control systems and allowing you to control and regulate ecoTEC Pro at any time, from any place, quickly and intuitively. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC Pro Comfort and simplicity within everyone's reach Heating and domestic hot water solution Reduced installation costs Sanitary comfort even with low flow rates High efficiency pump Intuitive display and simplified adjustments Frost resistance -5°C Steel primary exchanger Pneumatic Combustion System Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Thema Condens 26 Power supply: LPG NOx class : 6 Degree of protection: IPX5 Energy efficiency Energy efficiency class in heating: A Energy efficiency class in sanitary ware: A Health load profile: XL Warm-up performance Rated power 80°~60°C : 4.9 ~ 24.2 kW Maximum efficiency 80°~60°C : 98.8% Maximum efficiency 50°~30°C : 106.5% Healthcare performance Rated power 60°C: 25.5 kW Specific flow rate (DT = 30K) (EN13203) : 12.2 l/min Domestic hot water temperature: 38°~60° C Dimensions and weight Dimension (HxWxD) 740x418x344 mm Net weight: 37.1 Kg THEMA CONDENS Wall-mounted condensing boiler specifically for commercial propane systems Thema Condens, ecological and high-performance, meets the highest standards in terms of efficiency and comfort, thanks to the exclusive Aquaspeed® technology for the production of domestic hot water. The range includes a single 26 kW combined model, designed with the aim of offering Hermann Saunier Duval installers the ideal solution for replacing traditional boilers powered by commercial propane. Thema Condens was designed with the aim of offering an ideal solution for replacing traditional boilers powered by commercial propane. Thema Condens, a boiler at the top of its category in terms of domestic comfort and efficiency. The exclusive Aquaspeed® system guarantees the immediate supply of domestic hot water at the desired temperature: the preheating of the primary circuit and therefore also of the secondary stainless steel plate exchanger, allows the boiler to respond immediately to any sudden request from the user. Designed for commercial propane fueled systems Equipped with Aquaspeed® technology for pre-heating domestic hot water Elegant design and small size Ease of management Thema Condens was created to operate on commercial propane but can easily be converted to operate on methane gas if necessary. Thema Condens is the ideal solution for replacing, inside apartments, traditional or condensing wall-mounted boilers that work on high-temperature or low-temperature systems. Thema Condens is available in a single model with a power of 24 kW for heating and 26 kW for the production of domestic hot water. Characteristics Commercial propane condensing wall mounted boiler, combined for heating and domestic hot water, with stainless steel primary exchanger 4-star energy classification (92/42/EEC) with efficiency up to 108.4%; 3-star domestic hot water comfort (EN 13203-1), thanks to the Aquaspeed® system which guarantees immediate delivery of domestic hot water at the desired temperature. Control panel with backlit digital display, easy to use: the user can easily select the desired functions and temperatures. Solar Easy: compatible with all Hermann Saunier Duval solar systems, thanks to a complete series of solar kits. The small size makes Thema Condens perfect for both replacement and installation in new construction systems. Product Warranty : All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less