Riello condensing boiler Family Condens 25 KIS complete with methane or LPG fume exhaust kit class A - NEW Energy class in heating A Energy class in sanitary A XL load profile Heating Nominal heat input kW 20.0 Nominal thermal power (80°-60°) kW 19.5 Expansion vessel L 10 Sanitary Nominal heat input kW 25 Nominal thermal power** kW 26.3 Maximum pressure bar 8 Hot water production with T+25 °C l/min 15.1 NOx class 6 Dimensions Dimensions (H***xLxP) mm 822x470x275; 35 kgs Methane or LPG power supply: the boiler is self-adapting without the need for conversion kits Riello presents the New Family New stainless steel heat exchanger Riello has always designed its products with care and dedication. Continuous improvement leads today to the evolution of the Family condensing range, starting from its primary element: the exchanger. The new Family exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. Access remains from the front, to facilitate maintenance operations. Riello has also optimized the DHW exchanger by adopting the most advanced fluid-thermodynamic analysis and simulation techniques to obtain the best performance and maximum comfort for the user in terms of waiting times and temperature stability during sampling, compared to a boiler traditional MAXIMUM POSSIBLE LOAD PROFILE IN RELATION TO THE TYPE AND POWER OF THE GENERATOR, UP TO XXL IN THE CASE OF 35 KW FAMILY. SANITARY ENERGY EFFICIENCY CLASS A, THE MAXIMUM VALUE CURRENTLY PROVIDED BY EU REGULATION 811/2013 FOR COMBINED GENERATORS (TRADITIONAL B OILER CLASS B). REDUCTION OF GAS CONSUMPTION COMPARED WITH A TRA ADTIONAL BOILER BY APPROXIMATELY 10%, ACCORDING TO EN13203-2. ALMOST NULL WAITING TIME FOR HOT WATER (< 1 SECOND) WITH DOMESTIC HOT WATER PRE-HEATING FUNCTION ACTIVE (TRADITIONAL BOILER ABOUT 40 SECONDS). Emissions always under control The new Family is equipped with the intelligent ACC combustion control system, which guarantees that the process always takes place in an optimal manner in any condition, thanks to the modulating gas valve and the ionization electrode. Thanks to the ACC, the Family is able to automatically adapt to the fuel (methane or LPG) without resorting to specific codes or accessory conversion kits. Family also reacts to the variation of the fuel title and to the pressure drops on the flue gas side. The ACC system detects the excess air value and intervenes by modulating the air/gas mixture to always keep it within the optimal parameters. The ACC system also simplifies installation. In the ignition phase, it does not require calibration and it is sufficient to select the type of combustible gas used by the boiler via the interface, if different from the default one (methane). Since the system keeps the value of the CO2 produced constant, even the smoke control during the ignition phase is no longer necessary for the correct functioning of the product. Controlling combustion also means guaranteeing constant emissions, which are always well below the limits set by the law. In fact, if the process takes place in an optimal manner, the gases produced will also have the best theoretical composition with respect to the other conditions. Control panel and functions Even clearer, more intuitive and easier to use, it integrates elegantly into the aesthetics of the machine. The large backlit display, the raised keys and the interface enriched with explanatory texts and icons help the user and the installer in navigation. Through the panel it is possible to view the operating status, carry out the programming and access the regulation of the boiler and system. The Family display is equipped with the new "Color Bar" which informs the user at a glance on the operating status of the boiler. In the event of anomalies, it is possible to immediately understand if a problem is critical and whether to request the intervention of technical assistance. GREEN Regular operation. The system is satisfying domestic hot water/heating requests or carrying out other automatic operations. A scrolling text at the bottom describes the function active at that moment. RED Presence of blocking anomalies that require an intervention by the Technical Assistance. An error triangle on the display gives access to the details of the anomaly. YELLOW Presence of anomalies that can potentially be solved by the user which allow even partial operation of the product. An error triangle on the display gives access to the details of the anomaly. GRAY The system is ready to serve any requests. No operation in progress and anomaly detected. RiCloud - Comfort at your fingertips The RiCLOUD intelligent remote control allows you to manage the comfort of your home in a simple and intuitive way, even when you are away from home. Through the dedicated app it is in fact possible to check the status of the heating system, but also to program the boiler's switching on and off, temperature and operating times directly from your smartphone or tablet. It is possible to manage up to 8 different zones, each controlled by its own RiCLOUD. RiCLOUD can also be installed in total wireless mode using a radio frequency receiver, available as an accessory, thus avoiding any electrical or masonry intervention. Many needs, one solution INTERIOR Inside the home, thanks to an elegant aesthetic that allows it to be inserted pleasantly into any environment . OUTDOOR Outdoors in a partially protected place, thanks to the IPX5D degree of protection and the standard antifreeze function down to -0 °C , without additional heaters. BUILT- IN Inside a built-in box or wall unit, thanks to its compact dimensions (25 kW model). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview RIELLO FAMILY IN CONDENS 3.0 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT + BUILT-IN UNIT - NEW ErP 2015: Family Condens is a technologically advanced wall-mounted built-in boiler that allows you to have the special Family functions in the concealed built-in unit. Technical specifications Product code:ÿ20102941 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitaryware energy efficiencyprofilXL Class A Characteristics of heating/sanitary exercises: Firebox thermal power (heating)ÿmin-max: 3.2ú25ÿkW Useful thermal power (sanitary) min-max: 3.2ú30ÿkW Energy efficiency(92/42/CEE)ÿ**** Efficiency at Pn* (50øC-30øC): 106.8% Profitability 30% (47ø return): 109.9% Sealed chamber, forced drafts Quantity of hot water at t 25°C: 17.2 l/min Minimum domestic water flow rate: 2ÿl/min Dimensions (hxwxd) mm 797 x 553 x 268ÿ; 42 kgs Built-in dimensions (hxlxp) mm 1223 x 654 x 281; 21kg Electrical protection degrees: IP X5D NOx class: 5 Power supply: LPGÿ Complete with built-in unit code ÿ20082310 Features list FAMILY IN CONDENS Efficiency****ÿ Low polluting emissionsÿ Aluminum condenser, with premix burnerÿ Models for combined instantaneous and accumulation heating For built-in installations Family In Condens a built-in wall mounted boiler that allows you to have the special Family functions in the concealed built-in. The new primary heat exchanger completely made of aluminum with frontal accessibility to the combustion chamber guarantees better efficiency and duration. It is available with powers from 3.2 to 30 kW. Features:ÿ Modulation ratio 1:10 (minimum power 3.2 kW) which allows the boiler to respond to all heat requestsÿ Modulating circulator, low consumption(IEE0,20)ÿ 3 Stars in sanitary comfort according to EN 13203ÿ Family Remote Control, supplied as standard, allows management of all boiler functions directly from inside the homeÿ Antigelfine -15øCÿ Remote alarm system which allows remote signaling of the boiler lockout statusÿ Special Family functions: TastBenessere, TastMemory, Touch&Go function Smart Fillsÿ Standard external probe. ÿTheÿFAMILY Remote Control kitÿ (remote control panel) is the instrument that allows you to manage the boiler remotely. The panel controls the boiler, storage tank and room temperatures, monitors and supervises the operating regimes, activation times and signals any anomalies. The remote control panel can be configured as: Chronothermostatÿ (factory con guration): it will operate according to the standard heating program according to the personalized one. In this con guration the control panel tries to keep the room at two temperature levels (comfort and reduced), switching from one to the other at times established by the user. Thermostat: the heating is activated when the temperature detected by the room probe (contained in the control panel) is lower than the one set regardless of the memorized heating programme. ErP: Energy related Products ErP the acronym for Energy related Products? (products connected to the use of energy) and the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design (or eco-design?). The scope of action of this European Directive is extremely broad since up to now it has affected products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 they will also apply to heating products and the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community is necessary to allow the full transposition of the contents by companies and market players. The regulations issued require that all products intended for heating and/for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an ÿenergy labelÿ that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the introduction of the product from the factories to the market. All the products previously introduced, for example present near distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product, to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as well as those on air conditioners, the efficiency data reported for the average climatic zone. In addition to product energy labels, European regulations have also provided for the creation of a "system label" in the case of building a plant in which various appliances, components and controls operate. This labelling, thanks to the combinations of the data of the various elements used in the plant, will allow the creation of systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/operates the system (sellers-installers); but this faculty is also granted to builders. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

RIELLO RESIDENCE CONDENS 32 KIS METHANE CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Technical features Product code: 20096588 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 30 kW Sanitary nominal heat input: 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.7% Profit return 30% (47th return): 109.8% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Dimensions (hxlxp) mm 845 x 450 x 358 ; 42 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE General characteristics RESIDENCE CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models Residence Condens is the Riello wall-mounted condensing boiler for medium-sized users. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber ensures better efficiency and durability. It is available with powers from 20 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO START IN CONDENS 25 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT + BUILT-IN UNIT - NEW ErP Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 20 kW Heating rated heat output: 19.5 kW Sanitary nominal heat input: 25 kW Sanitary nominal thermal power: 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.2% Profit return 30% (47th return): 108.9% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 14.3 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 30 Kgs Electrical protection degree: IP X5D NOx class: 5 It can be installed flush-mounted using the special built-in unit Power supply: LPG General characteristics START IN CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Recessed Start IN Condens is the new Riello condensing wall-mounted proposal for small and medium-sized domestic users. The new compact aluminum condensing exchanger guarantees efficiency and reduction of polluting emissions. It can be installed flush-mounted using the special kit. It is available in version 25 (with 25 kW of DHW power and 20 kW in heating) and 29 (with 29 kW of DHW power and 25 kW in heating). Characteristics: Low consumption circulator (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at temperature, reducing waiting times during withdrawal (can be activated by the user) Remote control panel in combination with the external probe (optional) Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB PRODUCT DISCONTINUED, WE WILL SHIP THE MODEL NEW START AR 25 Kis LOW NOx 20171062 Riello START AR 25 Kis LOW NOx condensing boiler cod. 20151671 complete with flue kit - NEW ErP General characteristics ErP technical data Seasonal space heating energy efficiency class B Water heating energy efficiency class A Declared load profile XL Heating technical data Nominal heat input (Hi) kW 25 Nominal heat output (80-60°C) 25.35 Warm-up exercise Maximum pressure bar 3 Maximum temperature 90 °C Membrane expansion vessel l 8 Sanitary technical data Nominal heat input (Hi) kW 25.00 Profit return 30% (30th return) % 100.6 Supply voltage V - Hz 230-50 IP X5D degree of protection NOx class 6 Dimensions WxDxH 400x332x780 mm; 37 kgs Technical features START AR Yield **** Combined models Start AR is the condensing boiler specifically designed to work with high temperatures and therefore with radiator systems; it is specially designed to have a reduced formation of condensate with system return temperatures above 50°C. It is available in powers of 25 and 29 kW. Characteristics: Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Assembly template, hydraulic fittings, power supply cable supplied ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. From the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players.   The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of domestic hot water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G.   A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range.   In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate.   This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders.   Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello Residence Condens 30 kis condensing boiler complete with Low NOx Methane Fume Kit class A - NEW Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/DHW operating characteristics Heating nominal heat input kW 20 Nominal thermal power (80°-60°) heat kW 19.5 Maximum heating pressure bar 3 DHW nominal heat input kW 25 Nominal thermal power* sanitary kW 26.3 Hot water production with t+25 °cl/min 15.1 NOx class 5 Dimensions HxWxD mm 740x420x350 Electrical data Total electric power (pmax heating) W 75 Supply voltage V - Hz 230 - 50 IP X5D degree of protection Power supply: METHANE RESIDENCE CONDENS RIELLO PRESENTS RESIDENCE THE NEW RANGE OF CONDENSING BOILERS NEW EXCHANGER Wrapped stainless steel primary exchanger. Efficiency and reliability in the heart of the Residence. DOMESTIC COMFORT FUNCTION Domestic water pre-heating with Touch&Go function for activation upon request directly from the drawing tap. ACTIVE COMBUSTION CONTROL Advanced electronic combustion control system which constantly monitors combustion to obtain constantly optimized consumption and emissions. DIGITAL USER INTERFACE Simple and intuitive backlit LCD display. Ease of setting thanks to the silk-screened keys dedicated to the individual user functions. MODULATING CIRCULATOR High efficiency circulator with flow rate modulation and regulation logic that can be set between different modes according to the type of system. HIGH EFFICIENCY The high efficiency of the primary exchanger, the modulating circulator and the continuous control of the combustion parameters guarantee very low consumption even after years of operation. QUICK INSTALLATION Speed ​​and ease of installation thanks to the compact dimensions, accessibility of the components and external electrical connections. UNIQUE VERSION METHANE - LPG Dedicated codes are no longer necessary in the case of LPG because Residence is able to automatically adapt its operation to the type of fuel with rapid setting from the display. FLEXIBLE INSTALLATION The characteristics of Residence and its compact dimensions make it the ideal solution for both indoor and recessed installation (model 25 KIS only) or outdoors in a partially protected place. RESIDENCE, HEART OF STEEL The new RESIDENCE exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. NEW PRIMARY EXCHANGER IN STAINLESS STEEL The single coil geometry (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents clogging. Front access facilitates periodic maintenance and cleaning of the combustion chamber. SELF-ADAPTING ELECTRONIC COMBUSTION CONTROL The new Residence is equipped with the intelligent ACC combustion control system, which guarantees that the process always takes place in an optimal manner in any condition, thanks to the modulating gas valve and the ionisation electrode. Thanks to the ACC, Residence is able to automatically adapt to the fuel (methane or LPG) without resorting to specific codes or accessory conversion kits. Residence also reacts to the variation of the fuel title and to the pressure drops on the flue gas side. The ACC system detects the excess air value and intervenes by modulating the mixture. The ACC system also simplifies installation. During ignition, it does not require calibration and it is sufficient to select the type of combustible gas used by the boiler via the interface, if different from the default one (methane). Since the system keeps the value of the CO2 produced constant, even the smoke control during the ignition phase is no longer necessary for the correct functioning of the product. Controlling combustion also means guaranteeing constant emissions, which are always well below the limits set by the law. In fact, if the process takes place in an optimal manner, the gases produced will also have the best theoretical composition with respect to the other conditions. MANY NEEDS, ONE SOLUTION RESIDENCE IS ALWAYS THE IDEAL CHOICE THANKS TO THE TECHNICAL SOLUTIONS AND THE COMPACT DIMENSIONS, IT CAN BE USED IN ANY INSTALLATION SITUATION INTERIOR Inside the home, thanks to an elegant aesthetic that allows it to be inserted pleasantly into any environment. OUTDOOR Outdoors in a partially protected place, thanks to the IPX5D degree of protection and the accessory antifreeze heater kit RECESSED Inside a built-in box thanks to its compact dimensions (model 25 KIS only). NEW DIGITAL CONTROL Setting your own comfort for domestic hot water, air and heating is immediate thanks to the buttons with symbols dedicated to the individual functions Domestic hot water temperature setting Operating status 0FF - SUMMER - WINTER Unlock and restore alarms Information and parameters menu Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THIS PRODUCT IS MADE TO ORDER. SHIPPING TAKES PLACE WITHIN 10 WORKING DAYS FROM THE DATE OF PURCHASE NB THE BOILER WILL BE SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE RIELLO RESIDENCE EXTERNA CONDENS 32 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT -NEW ErP Technical features Product code: 20096735 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 30 kW Useful thermal power (sanitary): 32 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 104.7% Profit return 30% (47th return): 109.5% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 18.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 785 x 553 x 275 ; 46 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE RESIDENCE EXTERNAL CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models For outdoor installations Residence Externa Condens is specifically designed for outdoor installation and stands out for its extremely small dimensions. Equipped as standard with the exclusive Riello condensing exchanger, completely made of aluminum and without welding, synonymous with efficiency and durability, resistant to system dirt with high heads and excellent heat exchange. The climatic regulation is managed directly via the boiler board: this allows the temperature of the heating system to be suitably adapted to the external climatic conditions. Residence Externa Condens is controlled directly from inside the home thanks to the exclusive remote control supplied as standard. Residence Externa Condens is available with powers from 20 to 32 kW. Characteristics: Remote control panel supplied as standard Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) Antifreeze function that protects the heating and DHW circuits down to -5°C with the possibility of extending the protection down to -15°C (optional) "Winter with Pre-heating" function: allows the DHW exchanger to be maintained at temperature, reducing waiting times during withdrawal (instantaneous combined models) Possible "open-air" installation using the special waterproof kit (optional) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO START CONDENS AR 29 KIS LPG CONDENSING BOILER - ERP READY Product code: 20100124 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Sanitary nominal heat input: 29 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.9% Profit return 30% (47th return): 108.4% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 16.6 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 32 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG START CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Combined models for indoor, outdoor, built-in, with stainless steel storage tank Start Condens is the new Riello condensing wall-mounted proposal for small and medium-sized domestic users. The new compact aluminum condensing exchanger guarantees efficiency and reduction of polluting emissions. It can also be installed outdoors in a partially protected place. It is available in version 25 (with 25 kW of DHW power and 20 kW in heating) and 29 (with 29 kW of DHW power and 25 kW in heating). Characteristics: Low consumption circulator (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at temperature, reducing waiting times during withdrawal (can be activated by the user) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Natural gas operation as standard with the possibility of conversion to LPG (G31) and propane air (accessories), this modification is the responsibility of the installer or the technical assistance service. Possibility of outdoor installation in partially protected places, using special accessory kits. Yield **** Low polluting emissions Aluminum condenser, with premix burner Combined models and heating only for indoors, outdoors in partially protected places Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Product Available on Order Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile M Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 20 kW Useful thermal power (sanitary): 20 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 105% Profit return 30% (47th return): 110% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 11.5 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 845 x 400 x 358 ; 39 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: METHANE General characteristics RESIDENCE CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models Residence Condens is the Riello wall-mounted condensing boiler for medium-sized users. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber ensures better efficiency and durability. It is available with powers from 20 to 32 kW. Characteristics:  Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

RIELLO RESIDENCE CONDENS 25 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP  Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/DHW operating characteristics Nominal heat output (heating): 19.5 kW Nominal heat input kW: 25 kW Energy efficiency (92/42/EEC) **** Profit return 30% (47th return): 108% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 15.1 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxwxd) mm 740x420x275; 35 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG (BY DISPLAY SETTING) RESIDENCE CONDENS RIELLO PRESENTS RESIDENCE THE NEW RANGE OF CONDENSING BOILERS NEW EXCHANGER Wrapped stainless steel primary exchanger. Efficiency and reliability in the heart of the Residence. DOMESTIC COMFORT FUNCTION Domestic water pre-heating with Touch&Go function for activation upon request directly from the drawing tap. ACTIVE COMBUSTION CONTROL Advanced electronic combustion control system which constantly monitors combustion to obtain constantly optimized consumption and emissions. DIGITAL USER INTERFACE Simple and intuitive backlit LCD display. Ease of setting thanks to the silk-screened keys dedicated to the individual user functions. MODULATING CIRCULATOR High efficiency circulator with flow rate modulation and regulation logic that can be set between different modes according to the type of system. HIGH EFFICIENCY The high efficiency of the primary exchanger, the modulating circulator and the continuous control of the combustion parameters guarantee very low consumption even after years of operation. QUICK INSTALLATION Speed ​​and ease of installation thanks to the compact dimensions, accessibility of the components and external electrical connections. UNIQUE VERSION METHANE - LPG Dedicated codes are no longer necessary in the case of LPG because Residence is able to automatically adapt its operation to the type of fuel with rapid setting from the display. FLEXIBLE INSTALLATION The characteristics of Residence and its compact dimensions make it the ideal solution for both indoor and recessed installation (model 25 KIS only) or outdoors in a partially protected place. RESIDENCE, HEART OF STEEL The new RESIDENCE exchanger is made of stainless steel, with a smooth tube with a large section to guarantee the best efficiency and cleanliness over time. NEW PRIMARY EXCHANGER IN STAINLESS STEEL The geometry with a single wrapped coil (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents clogging phenomena. Front access facilitates periodic maintenance and cleaning of the combustion chamber. SELF-ADAPTING ELECTRONIC COMBUSTION CONTROL The new Residence is equipped with the intelligent ACC combustion control system, which guarantees that the process always takes place in an optimal manner in any condition, thanks to the modulating gas valve and the ionization electrode. Thanks to the ACC, Residence is able to automatically adapt to the fuel (methane or LPG) without resorting to specific codes or accessory conversion kits. Residence also reacts to the variation of the fuel title and to the pressure drops on the flue gas side. The ACC system detects the excess air value and intervenes by modulating the mixture. The ACC system also simplifies installation. During ignition, it does not require calibration and it is sufficient to select the type of combustible gas used by the boiler via the interface, if different from the default one (methane). Since the system keeps the value of the CO2 produced constant, even the smoke control during the ignition phase is no longer necessary for the correct functioning of the product. Controlling combustion also means guaranteeing constant emissions, which are always well below the limits set by the law. In fact, if the process takes place in an optimal manner, the gases produced will also have the best theoretical composition with respect to the other conditions. MANY NEEDS, ONE SOLUTION RESIDENCE IS ALWAYS THE IDEAL CHOICE THANKS TO THE TECHNICAL SOLUTIONS AND THE COMPACT DIMENSIONS, IT CAN BE USED IN ANY INSTALLATION SITUATION INTERIOR Inside the home, thanks to an elegant aesthetic that allows it to be inserted pleasantly into any environment. OUTDOOR Outdoors in a partially protected place, thanks to the IPX5D degree of protection and the accessory antifreeze heater kit RECESSED Inside a built-in box thanks to its compact dimensions (model 25 KIS only). NEW DIGITAL CONTROL Setting your own comfort for domestic hot water and heating is immediate thanks to the buttons with symbols dedicated to the individual functions Domestic hot water temperature setting Operating status 0FF - SUMMER - WINTER Unlock and restore alarms Information and parameters menu Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Riello START AR 25 Kis LOW NOx condensing boiler cod. 20151671 complete with flue kit - NEW ErP ErP technical data Seasonal space heating energy efficiency class B Water heating energy efficiency class A Declared load profile XL Heating technical data Nominal heat input (Hi) kW 25 Nominal heat output (80-60°C) 25.35 Warm-up exercise Maximum pressure bar 3 Maximum temperature 90 °C Membrane expansion vessel l 8 Sanitary technical data Nominal heat input (Hi) kW 25.00 Profit return 30% (30th return) % 100.6 Supply voltage V - Hz 230-50 IP X5D degree of protection NOx class 6 Dimensions WxDxH 400x332x780 mm; 37 kgs START AR Yield **** Combined models Start AR is the condensing boiler specifically designed to work with high temperatures and therefore with radiator systems; it is specially designed to have a reduced formation of condensate with system return temperatures above 50°C. It is available in powers of 25 and 29 kW. Characteristics: Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Assembly template, hydraulic fittings, power supply cable supplied ErP: Energy related Products The new European regulations for heat generators   ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players.   The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of sanitary water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G.   A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range.   In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate.   This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO START IN CONDENS 29 KIS LPG CONDENSING COMPLETE WITH FUME KIT + BUILT-IN UNIT - NEW ErP Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Sanitary nominal heat input: 29 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn (50°/30°): 104.9% Profit return 30% (47th return): 108.4% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 16.6 l/min Dimensions (hxwxd) mm 792 x 405 x 248 ; 32 kgs Electrical protection degree: IP X5D NOx class: 5 It can be installed flush-mounted using the special built-in unit Power supply: LPG General characteristics START IN CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Recessed Start IN Condens is the new Riello condensing wall-mounted proposal for small and medium-sized domestic users. The new compact aluminum condensing exchanger guarantees efficiency and reduction of polluting emissions. It can be installed flush-mounted using the special kit. It is available in version 25 (with 25 kW of DHW power and 20 kW in heating) and 29 (with 29 kW of DHW power and 25 kW in heating). Characteristics: Low consumption circulator (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at temperature, reducing waiting times during withdrawal (can be activated by the user) Remote control panel in combination with the external probe (optional) Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less