Baxi AVANT BLUE 24 Fi condensing boiler Low NOx 6 complete with flue kit cod. 7733702 LPG - NEW Baxi brand Model Avant Blue 24 FI Product Code 7733702 Power 24 kW Energy class A Condensation type Heating/DHW nominal heat input kW 24.8 Sanitary nominal thermal power kW 24 Emissions of nitrogen oxides NOx mg/kWh 18 Sanitary water production ∆T 25°C l/min 13.7 Minimum domestic water flow rate l/min 2 LPG supply Combustion Chamber Sealed chamber/Forced draft Degree of protection IPX5D Dimensions (LxHxP) - Weight 450x763x345 mm Weight; 43.5 kgs AVANTBLUE Baxi Avant Blue FI 7724370 NOx6 24 kW ErP natural gas, the condensing boiler with energy class A Low NOx emissions: class 6 according to EN 15502 Modulating fan Aluminum alloy condensing post-exchanger Sturdy and reliable: brass hydraulic unit with turbine sanitary sensor for optimal comfort and large passage copper exchanger Arrangement for combination with the Baxi integrated solar system Same settings as a traditional boiler (the analyzer is not necessary to adjust the gas valve) Control panel with multifunction LCD display hydraulic system Brass hydraulic unit with electric three-way diverter valve and turbine sanitary sensor Steel burner Copper water/fume exchanger Sanitary heat exchanger in stainless steel Aluminum alloy condensing post-exchanger High efficiency circulation pump Pump anti-blocking system and 3-way valve (which intervenes every 24 hours) Pump post-circulation Automatic by-pass Built-in condensate drain siphon Thermoregulation system Climatic adjustment (external probe available as an option) Heating circuit temperature adjustment DHW circuit temperature adjustment Remote control and climatic regulator available as an accessory, both in wired and wireless versions Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the boiler in case of water shortage Safety air pressure switch for checking correct smoke evacuation Temperature control using NTC probes. Pressure indicator Electronic thermometer Total antifreeze protection Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER WILL BE SUPPLIED WITH METHANE WITH THE LPG CONVERSION KIT INCLUDED, WHICH MUST BE INSTALLED BY THE SERVICE CENTER DURING FIRST IGNITION. IN CASE OF UNAVAILABILITY OF THE ITEM, THE NEW LOW NOX AVANT BLUE MODEL WILL BE SHIPPED BAXI LUNA3 AVANT+ 240 Fi LPG CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT -ErP ______________________________________________________ Technical features ErP energy efficiency class (heating and DHW): A - B Load profile: XL Heating/DHW nominal heat input kW 24.8 Heating/DHW nominal heat output kW 24 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 96.8% Efficiency at 100% Pn (50-30°C): 101.6% Minimum operating temperature °C -5 Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-65 Sanitary water production ∆T 25°C l/min 13.7 Minimum domestic water flow rate I/min 2 Degree of protection: IPX5D Electric power W 122 Dimensions (hxwxd): 763x450x345 mm ; 43.5 kgs Power supply: LPG ____________________________________________________________________ Luna3 Avant+ Wall mounted condensing boiler ideal for replacement in high temperature systems Baxi introduces the new Luna3 Avant+ 240 Fi condensing boiler which re-proposes the best characteristics of the Luna3 range of conventional boilers (sanitary performance, reliability and installation versatility) combined with the advantages and performance of a condensing boiler. Luna3 Avant+, in fact, is equipped with an aluminum alloy condensing post-exchanger (recovery) which recovers the latent heat of condensation, which in traditional boilers is instead dispersed with the exhaust gases. The exchanger-recovery, positioned inside the boiler at the top right, is directly connected to the fan which pushes the fumes inside, where they condense in contact with the system return water, before being expelled. Characteristics: High efficiency circulation pump Arrangement for combination with the Baxi integrated solar system Same settings as a traditional boiler (the analyzer is not necessary to adjust the gas valve) Operation on methane (possibility of operation on LPG with conversion kit) Control panel with multifunction LCD display STANDARD climate control (with optional external probe) Aluminum alloy condensing post-exchanger _________________________________________________________________ Product Warranty: The warranty on this item is 24 months from the date of purchase.

Read more less

Baxi condensing boiler mod. EVOlution Prime 30 kW Methane or LPG Complete with fume exhaust kit - ErP Model: EVOlution Prime 30; Typology: Condensation; Installation: Recommended for replacing conventional boilers Performance: DHW nominal heat input kW 31 Heating nominal heat input kW 24.7 Useful thermal power at 30% pot. term. name and low temp.** P1 kW 8 XL load profile Seasonal space heating energy efficiency class A Water heating energy efficiency class A Emissions of nitrogen oxides NOx mg/kWh 40 Minimum operating temperature °C -5 Heating expansion vessel capacity l 8 Heating circuit water temperature adjustment °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ΔT 25°C(1) l/min 16.1 DHW circuit minimum water flow rate l/min 2 Minimum heating circuit water pressure 0.5 bar Degree of protection IPX5D Dimensions: Dimensions (hxlxp) mm 700x395x279 EVOlution PRIME Wall mounted condensing gas boilers ideal for replacing conventional boilers The new range of EVOlution PRIME condensing boilers has been equipped with an innovative Baxi patented exchanger. Single Ø 28 mm self-cleaning stainless steel coil, with wide passages. Significant reduction of load losses Greater thermal efficiency Reduction of any deposits and therefore less risk of clogging Ease of maintenance The range of EVOlution PRIME condensing boilers is divided into three models, 26 and 30 kW for heating and instantaneous domestic hot water production: the 26 Mago model is equipped with the Baxi Mago SERIES, while it remains an accessory for the other two models. EVOlution PRIME has been designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling regulation (EU Regulation 2017/1369) requires the labeling of products according to a decreasing energy scale that goes from A++ to G and which will pass from A+++ to F from 09/26/2019. The energy class, identified by a letter, expresses a range of efficiency values ​​within which the one expressed by the product in question resides. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products. EVOlution PRIME 26 Mago: the advantages with the STANDARD Baxi Mago The EVOlution PRIME 26 Mago boiler is STANDARD equipped with the Baxi Mago, the modulating chronothermostat with integrated Wi-Fi designed to simplify the life of installers, assistance centers and end users, as it allows you to manage domestic comfort directly from an App, via the wifi connection. The advantages of the EVOlution PRIME condensing boiler Easy to install The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce installation time. The EVOlution PRIME has the same center distances of the hydraulic connections of the conventional BAXI boilers to be replaced. Front access to the electrical connection also speeds up connection times. Lower energy consumption Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory. Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue outlet and the separate adjustable outlet supplied as standard. The coaxial exhaust Ø 60/100 is available as an accessory that can be combined with a pipe extension and a 90° bend diameter 60/100 (adjustable by 360°).Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue exhaust and the separate adjustable exhaust supplied as standard. The Ø 60/100 coaxial outlet is available as an accessory that can be combined with a pipe extension and a 60/100 diameter 90° bend (360° adjustable). The lower closure kit allows the boiler to adapt to any environment, reducing the visual impact and inserting itself in all the replacement installation contexts. The spacer frame allows the boiler to be moved away from the wall by 40 mm, allowing the passage of the pipes in the rear part of the back panel. This accessory facilitates the replacement of the boiler by eliminating the masonry work. New Baxi patented exchanger with single coil in stainless steel with large water passage sections 8-litre oversized heating expansion vessel Easy to use thanks to the control panel equipped with knobs and backlit LCD display Easy installation thanks to the ultra-compact dimensions (700x395x279 mm - including knobs) and low weight (26 kg) Easy replacement of conventional boilers thanks to central flue gas outlet Modulation range 1:5 greater efficiency and silence Arrangement for combination with the Baxi integrated solar system Ø 80 double drain STANDARD Connection to rigid and flexible Ø 50 mm exhaust pipe: solution for restoring flues - total length (exhaust + intake) 35 meters Connection to pressurized collective flues Boilers running on methane that can be converted to LPG and propane by means of a specific regulation (conversion kit not necessary) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL Nominal heat output: 24 kW Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.7% Efficiency at 100% Pn (50-30°C): 105.8% Sanitary water production ΔT 25°C: 13.8 l/min Degree of protection: IPX5D Dimensions (hxwxd): 700 x 400 x 299 mm ; 34 kgs Power supply: CNG or LPG * Operation with LPG through adjustment by the Authorized Service Centre Duo-tec Compact+ Wall mounted gas condensing boilers ideal for both new build and replacement Digital control panel The Duo-tec+ range of boilers is equipped with a new digital control panel with an even more backlit LCD display, clearer and simpler to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and of the heating. The display allows you to view all the information and set the operating parameters in an intuitive and immediate way. Efficiency and savings Wide modulation range: greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adaptation of the thermal power produced to the power dissipated thus avoiding excessive overheating / cooling of the premises GAC Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Advantages: there are no manual interventions – reduced measurements, calibrations with this system, the boiler self-adapts to the quality of the gas (methane) and to the length of the flue gas pipes, keeping the efficiency constant the boiler also constantly self-regulates to maintain the maximum efficiency values ​​favoring a reduction of gas consumption and generating less pollution thanks to the continuous control of emissions. Fully modulating pump with de-aeration The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs. During the first ignition phase, we recommend activating the automatic de-aeration function. This function eliminates the presence of air in the heating circuit and therefore avoids any blockages of the boiler, overheating of the system, etc. Guidelines in case of replacement of a conventional boiler with a new condensing one There are two main problems that can be encountered: Flues and smoke exhaust duct Condensate drain To overcome the above, Baxi recommends: the use of a Ø50 mm exhaust pipe Baxi has in fact developed a system that allows easy ducting in existing flues (for 24kW models). For condensing boilers, the novelty is brought about by the low temperatures of the fumes which allow the use of specific plastic materials; however, in the presence of existing 316 stainless steel flues, installed correctly and with gaskets suitable for receiving damp fumes, there are no problems and they can easily be reconnected to the new boilers while it is absolutely not compliant with the use of aluminum flues or smoke pipes . In fact, aluminum is a metal that is not resistant to the acid condensates present in the fumes. (*) Each Ø50 mm diameter bend decreases the length of the drain by 4m the use of the condensate drain pump Baxi has designed this kit to collect the condensate produced by condensing boilers for domestic use: the pump allows the creation of condensate drainage systems in the absence of natural drainage near the boiler. The operation of condensing boilers determines the formation of condensate, due to the principle of condensation. This water therefore needs to be disposed of through special drains. If there is no adequate slope and therefore it is not possible to dispose of the condensate by gravity, it is necessary to install a pump that conveys it towards the drains. The pumps used are also equipped with special non-return valves to avoid bacterial contamination due to any stagnation and return of the waste water. The use of buildings avoiding the use of annoying pipes. Condensing Boilers The ranges of Duo-tec+ condensing boilers are characterized by very high modulation, the GAC system and remote capability. Very high modulation The wide modulation range up to 1:10 allows a reduction of the switching on/off of the boiler, resulting in an improvement in efficiency and consequently a considerable saving. GAC system The GAC (Gas Adaptive Control) system continuously measures the flame signal during boiler operation and adjusts the gas flow rate in order to keep the combustion quality constant. The resulting advantages are: reduction of installation times/ there are no manual adjustments to make/ reduction of gas consumption and lower environmental impact. Remote control For optimal comfort management, the Duo-tec+ offer a wide range of modulating units. In Platinum+ the extractable control panel and room thermostat are supplied STANDARD with the boiler. Available as optionals are the modulating chronothermostat and the LED interfaces that allow the units to be remotely remoted via wire or wireless. Also for the Duo-tec models, the offer of thermoregulation accessories includes both the remote control and climatic regulator and the wired or wireless modulating chronothermostat, in addition to the wired or wireless modulating thermostat. All boilers are provided with an antifreeze function and IPX5D degree of protection. Duo-tec Compact+ wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control high-efficiency circulation pump with total modulation digital control panel with large backlit LCD display predisposition for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod 24 kW ultra-compact dimensions: 700x400x299 mm antifreeze function and IPX5D degree of protection Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IN CASE OF NON-AVAILABILITY OF THE PRODUCT, THE NEW MODEL baxi evolution prime 30 WILL BE SUPPLIED Technical specifications ErP energy efficiency class (heating and DHW): A - A Load profile: XL heating and instant DHW production Heating/sanitary nominal heat inputkW 28.9/24.7 Sanitary nominal thermal powerÿkW 28ÿ Energy efficiency(92/42/CEE)ÿ**** Efficiency 100% Pn (80-60øC): 97.8% Efficiency 100% Pn (50-30øC): 105.0% Minimum operating temperatureøC -5 Expansion/pre-charge capacity l/bar 8/0.5 Sanitary water temperature adjustmentøC 35-60 Sanitary water production T 25øC l/min 16.1 Minimum domestic hot water flow rate I/min 2ÿ Degrees of protection: IPX5Dÿ NOx class (EN 483) 5 Electric power W 155 Dimensions (hxwxd): 700x395x279ÿmmÿ; 44 kgs Power supply: METHANE LPG Main features First ÿThe ideal condensation for replacement in old systemsÿ with cast iron / lamellar steel radiators The new Prime condensing range is divided into two models, 24 and 28 kW for heating and instant domestic hot water production. Prime was designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling directive (2010/30/EU) requires the labeling of products according to a decreasing energy scale that goes from A++ to G starting from 09/26/2015 and from A+++ to D from 09/26/2019. The label was created to allow the final consumer, by providing real and comparable data, to make informed choices by targeting high-efficiency products. Characteristics: Easy to use thanks to the control panel with knobs and backlit LCD displayÿ Easy installation thanks to the ultra-compact dimensions (700x395x285mm - including knobs) and weight-free (26 kg)ÿ Campdi modulation 1:5 greater efficiency and silence High efficiency circulation pumpÿ Arrangement for combination with the Baxiÿ integrated solar system Double 80 exhausts as standardÿ Connection of 50 mm rigid flexible exhaust pipes: solutions for flue refurbishmentÿ Connect pressurized collective fluesÿ Boilers working with methane that can be transformed into LPG and propane by means of a specific regulation (conversion kit not necessary) The advantages of the new Prime Easy to install The ultra-compact dimensions 700x395x279 mm and the weight of just 26 kg reduce the installation time. The new Prime has the same distance between centers of the hydraulic connections of the conventional BAXI boilers to be replaced. The frontal access to the electrical connection also speeds up connection times. The fixing bracket supplied as standard and the visible hooks facilitate wall mounting Clapet (non-return valve) Included in the downstream duct of the gas group fan ÿConnection of pressurized collective flues Thanks to the integrated non-return valve (clapet), Prime is designed for connection to pressurized collective flues. ÿFlexible smoke ducts 50 mm Possibility of rehabilitating the flue pipes with a 50 mm discharge hose (up to 40m of discharge). Less energy consumption Thanks to the condensing technology, the high efficiency pump and the series of modulating room thermostats available as an accessory. The new regulation 7129-3:2015 prescribes the possibility of creating collective flues in positive pressure only for type C condensing appliances. It is possible to connect to a collective flue in positive pressure only appliances declared suitable by the manufacturer for this application and equipped with non-return device (clapet), designed to prevent the combustion products from flowing through devices connected and temporarily switched off; the smoke non-return valve is an integral part of the appliance Flexibility in replacement Easy replacement of old standard boilers, thanks to the central flue and separable flue supplied as standard The 60/100 axial exhaust is available as an accessory and can be combined with a 90ø diameter 60/100 curved tube extension (adjustable by 360ø). To facilitate replacement in installations where spaces are limited (flue gas outlet at the rear of the boiler), the new accessory is available with a lowered coaxial bend 90ø. The lower closure kit allows the boiler to adapt to any environment, reducing the visual impact by fitting into all replacement installation contexts. To facilitate replacement in installations where space is limited (flue gas outlets at the rear of the boiler), the new 90ø coaxial lowered bend accessory is available New combustion group The new Prime combines the performance of the stainless steel exchanger with the advantages of a new generation burner integrated with an innovative cold closing door. The new cylinder burner ensures greater thermal-acoustic comfort, and reduced NOx and CO emissions thanks to the greater flame stability. The new cold door reduces losses by 75% with a surface temperature below 20°C, guaranteeing significant savings in stand-by and during operation, speeding up maintenance, as there is no need to wait for it to cool down. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Luna Alux 24 Ga ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 24.7 Heating nominal heat input kW 20.6 Sanitary nominal thermal power kW 24 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.7% Efficiency at 100% Pn (50-30°C): 105.5% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 13.8 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions ( HxWxD ) : 763 x 450 x 345 mm Weight : 42Kg Power supply: methane Wall-hung gas condensing boilers ideal for replacing old systems with cast iron/lamellar steel radiators The new condensing range Luna Alux is divided into two models, 24 and 33 kW for heating and instant domestic hot water production. Luna Alux was designed in compliance with the requirements of the Ecodesign and Labeling Directives. The labeling directive (2010/30/EU) requires the labeling of products according to a decreasing energy scale that goes from A++ to G starting from 09/26/2015 and from A+++ to D from 09/26/2019. The label was created to allow the final consumer, by providing true and comparable data, to make informed choices by targeting high-efficiency products. Exclusive design aluminum heat exchanger Luna Alux is the new Baxi condensing boiler equipped with a corrosion-resistant aluminum-silicon alloy exchanger which makes this boiler particularly solid. The exchanger, designed and produced on an exclusive Baxi design, has been studied with large water passage sections to make the boiler particularly suitable for replacement in old heating systems with cast iron or lamellar steel radiators In these types of systems, the replacement of the existing boiler with a new LUNA ALUX: Significantly lowers the risk of clogging due to impurities in the system water Makes operation particularly quiet The high water content inside the exchanger determines: Less temperature fluctuations Increased overheat protection More effective DHW pre-heating Furthermore, the exchanger can be inspected and this facilitates periodic maintenance Digital control panel The Luna Alux range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Efficiency and savings Wide modulation range: Greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Hydraulic group in brass Baxi has chosen to maintain quality in its components. The brass hydraulic group, in fact, is a guarantee of: Robustness Greater durability Recyclability Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions • power adjustment produced at the dissipated power thus avoiding excessive overheating/cooling of rooms A Gas Adaptive Control The innovative GAC (Gas Adaptive Control) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. High efficiency total modulation pump The Alux range is equipped with a high-efficiency, fully modulated circulation pump. The pump is equipped with a permanent magnet motor with a variable rotation speed controlled by the boiler board. The high efficiency total modulation pump allows: Lower electricity consumption Better performance Greater durability Characteristics: Wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control to constantly maintain the maximum efficiency values ​​(operation on methane only) High efficiency circulation pump with total modulation Aluminum-silicon alloy exchanger with large water passage sections Hydraulic group in brass 10 liter expansion vessel (mod. 33) Easy maintenance thanks to front access to components Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Electronic system deaeration function to facilitate air removal during initial ignition Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features ErP energy efficiency class (heating and DHW): A  Load profile: XL Nominal heat input 28.9 kW Nominal thermal power 28 kW Energy efficiency (92/42/EEC) **** Nominal efficiency 80/60°C % 97.6 Return at 30% % 108.8 Heating circuit water temperature control °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Minimum domestic water flow rate: 2 l/min Minimum operating temperature: -15°C Expansion/pre-charge vessel capacity l/bar: 8/0.8 NOx class (EN 483): 5 Electric power W 99 Degree of protection IPX5D Dimensions (hxlxp) - with case: mm 1170 x 600 x 245 Dimensions (hxwxd) - boiler 770 x 470 x 238 mm; 32.5kg Power supply: METHANE Luna Duo-Tec IN+ The efficiency of compact built-in comfort Baxi has always offered the ideal system solution for any type of home: for this reason the Duo-tec+ range is expanding with built-in models and for outdoor installation. Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also in new installations. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of ) Recessed installation outdoors Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also in new installations. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of ). The packing contains the bracket and installation fittings for inserting the boiler into the containment case Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Automatic plant loading system Minimum operating temperature: -15°C Remote digital control panel with LCD display Arrangement for combination with the Baxi integrated solar system High efficiency circulation pump with total modulation Ultra-compact dimensions: 770x470x238 mm (boiler) STANDARD installation kit (gas cock / gas inlet / telescopic fittings) Antifreeze function and IPX5D degree of protection Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Antifreeze function The boilers have been designed to allow the boiler to operate down to -15°C. Furthermore, the antifreeze function provides for the automatic ignition of the burner, avoiding freezing phenomena. Wide modulation range 1:7 greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 24.7 Heating nominal heat input kW 20.6 Sanitary nominal thermal power kW 24 Energy efficiency (92/42/EEC) **** Efficiency at 100% Pn (80-60°C): 97.7% Efficiency at 100% Pn (50-30°C): 105.8% Expansion/pre-charge vessel capacity l/bar 8/0.8 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 13.8 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (h x w x d): 763 x 450 x 345 mm ; 38.5 kgs Power supply: LPG To view more product information CLICK HERE General characteristics Luna Duo-Tec+ Wall mounted gas condensing boilers ideal for both new build and replacement The new Duo-tec+ range of gas-fired condensing boilers has been specifically designed in compliance with the requirements of the Ecodesign and Labeling Directives, to make it particularly suitable both for new buildings and for replacing an old generator. In fact, in addition to the already known advantages of condensing technology such as high efficiency, energy saving and reduced polluting emissions, the new Duo-tec+ condensing boilers are characterized by: Complete range of models : heating only, with instantaneous DHW production, with integrated micro-storage tank, with integrated 40-litre storage tank. The range also includes the compact version (Compact+), the first Baxi condensing boiler in just 70 cm in height and 30 cm in depth. Digital control panel with backlit LCD display Wide modulation range 1:7 the reduction of on/off cycles translates into significant benefits in terms of energy savings and lower emissions Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Total modulation pump The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control High efficiency circulation pump with total modulation Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW ErP/EcoDesign – Mandatory labeling from September 2015 Why ErP (Energy related Products)? To be placed on the EU market, a product must have the brand , or comply with all the European Directives applicable to it. The Ecodesign and Labeling Directives (eco-design and energy labelling) were created to help the EU achieve the objectives of the EU 20-20-20 Plan, with a particular focus on reducing CO2 emissions by 20%, the increase energy efficiency by 20% and to increase the use of renewable energies by 20%, all by 2020. For this reason, all heat generators for space heating, appliances for the production of DHW and systems of several of these appliances combined in combination will have to comply with eco-design requirements and be labelled, in accordance with the implementing regulations, for be able to be placed on the market by the producers. From 26 September 2015 , the directives will affect all the products described above with a Pn ≤ 400 kW for eco-design and with a Pn ≤ 70 kW for labeling, destined for the markets of all countries of the European Economic Area. Which directives are affected? 2009/125/EC Ecodesign requirements – Regulation 622/12 (ex 641/09 ref. circulators) – Regulations 813/13 and 814/13 2010/30/EU Requirements for energy labeling and classification – Regulations 811/ 13 and 812/13 How does the placing on the market take place? Placing on the market is carried out by the manufacturer (or by the importer from outside the EU) when the product is made available for the first time on the EU market. This happens when ownership changes to a distributor (invoice). What products can be sold? All products with the CE mark placed on the market before 01/08 and 26/09 2015 are considered compliant and therefore salable until they run out. All products that will be placed on the market (sold) by the manufacturer/importer after these dates will have to comply with the new standards. What is a product according to ErP (Ecodesign)? A luminaire designed to operate at maximum efficiency with minimum environmental impact. To comply with this directive, the product must have Pn ≤ 400 kW and, as regards hot water tanks, a volume ≤ 2000 litres. Manufacturers are obliged to place only ErP-compliant products on the market with these deadlines: from 1 August 2015 only products equipped with high efficiency pump from 26 September 2015 only products that meet the minimum ErP efficiency requirements Ecodesign defines the requirements that products must meet in order to be placed on the market, based on: Seasonal efficiency for heating and efficiency for DHW production based on the declared load profile Emissions (NOx values) Maximum permissible noise level of hydronic heat pump outdoor units What is a Combi product according to ErP? An appliance (single or with boiler) for heating and DHW production, already equipped with labeling with energy class information relating to a DHW load profile. What is a load profile in ACS? For mixed heat generators and DHW producers, the regulations define a certain sequence of water withdrawals as a load profile, essentially a simulation of daily operation of the product, with different withdrawals at established times, flow rates and ∆t . Therefore a product must be able to deliver the declared profile, on which the efficiency in obtaining it will then be calculated, which will determine the class declared on the label. For example: Examples: L profile XL profile XXL profile What is the Energy Label? The labeling directive (2010/30/EU) requires products to be labeled according to a decreasing energy scale ranging from A + + + to G. There is also an energy label for the installed system, depending on the components used ( for example a boiler, DHW tank and room temperature controls). The label was created for the final consumer, providing real and comparable data, to make informed choices and targeting high-efficiency products. There are energy labels: of product: system : Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BAXI LUNA3 COMFORT IN HT SOLAR 240 B150 24 KW CONDENSING BUILT-IN BOILER WITH 150 LITERS TANK FOR SOLAR SUPPLEMENTATION - COMPLETE WITH FUME EXHAUST KIT Technical specifications BAXI LUNA3 COMFORT IN HT SOLAR 240 B150 24 kW BUILT-IN CONDENSING BOILER with 150 liter boiler for solar integration; Gas condensing boiler for heating and DHW production with wall-mounted thermal stratification tank for solar integration. SMOKE EXHAUST KIT INCLUDED IN THE PRICE! By Regional Resolution in the Lombardy and Piedmont regions only boilers with the NOx 5 characteristic can be installed Product code: HLZ71412891 Sanitary nominal heat inputkW 24.7 Heating nominal heat input kW 20.5 Sanitary nominal thermal powerkW 24 Nominal heat output 80/60øC kW 20ÿ Nominal heat output 50/30øC kW 21.6 Reduced thermal power heating 80/60øC kW 4 Reduced thermal power heating 50/30øC kW 4.3 Energetic efficiency(92/42/CEE)ÿ4 stars Average efficiency (DIN 4702-T8) % 109.8 Efficiency 30% % 107.5 NOx class (EN 483) 5 Minimum operating temperatureøC -15 Heating expansion vessel capacity/pre-charge l/bar 8/0.5 Capacity of solar expansion / pre-charge l 18/2.5 Boiler capacity l 150 Domestic hot water production continuously 25øC l/min 13.8 Maximum circuit water pressure bar 3 Maximum pressure of sanitary circuitbar 8 Solar circuit maximum water pressure bar 6 Maximum concentric exhaust-intake pipe length 60/100 m 10 Maximum length of the split exhaust-intake pipe 80 m 80 Smoke temperature maxøC 73 Dimensions (hxlxp) mm 2200x950x350 Pesnett (without case) kg 97 - 108 (MS) Rated electric power W 297/470 (MS) Degrees of protection IPX5D (*) When used, even for a short time, in places with particularly cold temperatures (below -5°C) it is advisable to install the antifreeze heater accessory kit. Main features LUNA3 COMFORT IN HT SOLAR Gas-fired condensing boilerÿfor heating and DHW productionÿwith wall-mounted thermal stratification tank for solar integration. Wide range of 1ú6 modulation, greater efficiency and silence Minimum operating temperature-15ø C * 120 and 150 liter boilers in AISI 316L stainless steel with thermal stratification Remote control with LCD display, with chronothermostat function, climate control unit supplied AS STANDARD Configurable for different types of mixed systems, management of several low temperature zones Automatic plant loading system Standard climate control (with optional external probe) Control unit, expansion tank and hydraulic groups for the solar system integrated in the boiler structure hydraulic system Electric three-way diverter valveÿ Premix burner in AISI 316Lÿ stainless steel Water/fumes exchanger in AISI 316L stainless steel with external coating in composite materialÿ Increased sanitary heat exchanger in AISI 316L stainless steel 120 and 150 liter thermal stratification boiler in AISI 316L stainless steel with solar integration via coil exchangerÿ Modulating fan with electronic speed variation Automatic by-pass Low consumption heating circuit circulation pump Built-in deaeratorÿ Pump anti-blocking system and three-way valve which intervenes every 24 hoursÿ Heating circuit safety valve 3 bar 8 bar cylinder safety valve Circulation pump for cylinderÿ Sanitary expansion tank as standardÿ Solar expansion vessel Solar hydraulic units (pump, safety valve, flow regulator, deaerator)ÿ Thermostatic mixing valve on the hot water outlet of the storage tank Predisposition for domestic hot water recirculation Thermoregulation system Solar controller (pump controller and two temperature probes)ÿ Standard climate control (with external probe available as an option)ÿ Arrangement for connection to a zone systemÿ Ambient probe, heating and sanitary programmer integrated in the control panel Control systemÿ Safety thermostat against overheating of the water/fumes exchangerÿ Hydraulic pressure switches which blocks the gas in case of water shortage NTC safety probe against fume overheatingÿ Controlltemperature through NTC probes Anti-legionella functionÿ Total gel devicesÿ Thermometer kettleÿ Termometreelectronicboiler Manometrcircuitheating Examples of integrated systemÿconsisting of a built-in condensing boiler with integrated thermal stratification tank set up to control an independent solar system. DHW annual requirement coverage 60% from solar integration. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Baxi AVANT BLUE 24 Fi condensing boiler Low NOx 6 complete with flue kit cod. 7724370 - NEW Baxi brand Model Avant Blue 24 FI Product Code 7724370 Power 24 kW Energy class A Condensation type Heating/DHW nominal heat input kW 24.8 Sanitary nominal thermal power kW 24 Emissions of nitrogen oxides NOx mg/kWh 18 Sanitary water production ∆T 25°C l/min 13.7 Minimum domestic water flow rate l/min 2 Natural gas supply (LPG via conversion kit) Combustion Chamber Sealed chamber/Forced draft Degree of protection IPX5D Dimensions (LxHxP) - Weight 450x763x345 mm Weight; 43.5 kgs AVANTBLUE Baxi Avant Blue FI 7724370 NOx6 24 kW ErP natural gas, the condensing boiler with energy class A Low NOx emissions: class 6 according to EN 15502 Modulating fan Aluminum alloy condensing post-exchanger Sturdy and reliable: brass hydraulic unit with turbine sanitary sensor for optimal comfort and large passage copper exchanger Arrangement for combination with the Baxi integrated solar system Same settings as a traditional boiler (the analyzer is not necessary to adjust the gas valve) Operation on methane (possibility of operation on LPG with conversion kit) Control panel with multifunction LCD display hydraulic system Brass hydraulic unit with electric three-way diverter valve and turbine sanitary sensor Steel burner Copper water/fume exchanger Sanitary heat exchanger in stainless steel Aluminum alloy condensing post-exchanger High efficiency circulation pump Pump anti-blocking system and 3-way valve (which intervenes every 24 hours) Pump post-circulation Automatic by-pass Built-in condensate drain siphon Thermoregulation system Climatic adjustment (external probe available as an option) Heating circuit temperature adjustment DHW circuit temperature adjustment Remote control and climatic regulator available as an accessory, both in wired and wireless versions Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the boiler in case of water shortage Safety air pressure switch for checking correct smoke evacuation Temperature control using NTC probes. Pressure indicator Electronic thermometer Total antifreeze protection Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BAXI LUNA DUO-TEC+ 33 GA LPG CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Sanitary nominal heat input: 34 kW Nominal heat input Heating: 28.9 kW Reduced thermal input: 4.8 kW Sanitary thermal power: 33 kW Nominal thermal power Pnominal: 28 kW Useful efficiency at 30% thermal power. name and low temp. regime: 98.1% Useful efficiency (pci) at 30% - return temperature 30°C: 108.9% Minimum operating temperature: -5°C Expansion vessel capacity: 10 l Max heating operating pressure: 3 bar Degree of protection (IEC 60529): IP X5D Rated Electric Power: 106W NOx degree: 6 Dimensions (hxlxp): 763x450x345; 38.5kg Luna Duo-tec E and Duo-tec Compact E: the already well-known Baxi boilers present themselves today with a new aesthetic, increasingly modern and attentive to new design trends, which allows them to be inserted in any living context. The control panel has also been completely renewed and is equipped with a new backlit LCD display that is even clearer and simpler to use thanks to dedicated and independent keys. The new boilers, even more beautiful and modern thanks to the restyling, however keep intact the characteristics that have always distinguished the Duo-tec range: Reliability: robustness, durability and reliable performance; Efficiency and savings: the reduction of on/off cycles translates into considerable benefits in terms of energy savings and lower emissions; Completeness of the range: heating only models, with instant DHW production, and also the compact version with the possibility of outdoor installation. The range has been further enriched with the new models equipped as standard with the Baxi Mago modulating chronothermostat with integrated wi-fi. Wide modulation range 1:7 Greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions Adjustment of the thermal power produced to the dissipated power thus avoiding excessive overheating/cooling of the premises. Digital control panel The Duo-tec E range of boilers is equipped with a new digital control panel with backlit LCD display that is even clearer and simpler to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and heating. The display allows you to view all the information and set the operating parameters in an intuitive and immediate way. By pressing the dedicated key, it is possible to view numerous information regarding boiler operation, such as: heating system water pressure (electronic pressure transducer present in the hydraulic group); heating flow/return temperature; external temperature (with external probe installed); domestic hot water temperature. Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Advantages: • there are no manual interventions - reduced measurements, calibrations or nozzle changes; • with this system, the boiler self-adapts to the quality of the gas and the length of the flue gas pipes, keeping efficiency constant; • the boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions. Duo-tec E range: compatibility with Baxi Mago The entire Duo-tec E range is compatible with the Baxi Mago, available as an accessory, for remote boiler control. The boilers of the Duo-tec E range, if combined with the Baxi Mago, access the 65% deduction provided for by the 2019 Ecobonus. BAXI MAGO is the new generation chronothermostat designed to simplify the life of installers and users. An innovative and design tool, which combines extreme practicality with a modern, captivating aesthetic with a strong appeal. Furthermore, BAXI MAGO thinks about your savings: in fact it communicates with the boiler, optimizing consumption. And when you're away from home or just don't feel like getting off the sofa? BAXI MAGO can be managed from the app, comfortably with your smartphone. Smartphone management Automatic and fast programming Consumption under control Contact with the CAT Integrated systems: hydraulic, thermoregulation and control Electric three-way diverter valve (also for heating only models) Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense even in DHW operation Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump with total modulation Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the gas in case of water shortage NTC safety probe against fume overheating Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit digital pressure gauge Also for outdoor installation Duo-tec Compact E boilers can be installed outdoors in partially protected places thanks to the new top cover kit and bottom closure kit (available as accessories). In fact, the Duo-tec Compact E range is equipped AS STANDARD with an electronic antifreeze system which guarantees operation down to a temperature of -5 °C: the IPX5D protection also protects the electrical parts from jets of water which may come from all directions. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS MADE TO ORDER NB The boiler will be supplied with methane. For operation with LPG or propane air, contact the local authorized assistance center in advance. Technical features Model : LUNA STYLE 24 MAGO Code: A7754005 Heating nominal heat input: 20.6 kW DHW nominal heat input: 24.7 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: A+ Sanitary Energy Efficiency Class: A Withdrawal profile: XL Seasonal space heating energy efficiency ŋs: 94/98 % Water heating energy efficiency ŋwh: 88.0 % Useful efficiency at 30% thermal power. name and low temperature regime. **ŋ1: 99.4 Useful efficiency (pci) at 30% - return temperature 30°C: 110.3% Useful efficiency (pci) intermediate - medium temperature 70°C: 98.5% Dimensions and weight Dimensions (hxwxd): 763x450x334 mm Net weight: 31.5kg Description Class A+ for Luna Style 35/24 Mago models (STANDARD external probe) 98% energy efficiency thanks to the advanced technology applied Backlit color control panel, icons for parameter display, clear descriptions via large text display, adjustment knob and menu selection keys Wide modulation range 1:10 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Power set: heating power adjustment according to project data Hydraulic group in brass Connection to pressurized collective flues Natural gas boilers convertible to LPG and propane air (conversion kit not required) Antifreeze function and IPX5D degree of protection Operation with a mixture composed of up to 20% hydrogen Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less