ATTENTION THE BOILER HAS IRREGULARITIES ALONG THE LOWER GRILLE, A REPAIR TO THE INTERNAL PLASTIC, FRONT BULKS, FRONT RECESS, SIDE CURVE AND A SLIGHTLY IRREGULAR REAR SUPPORT. (FOR MORE INFORMATION ON THE DAMAGE VIEW THE FOLLOWING PHOTOS) Technical Features Model : Divacondens D Plus Nominal Thermal Power: 24 kW Power supply: Methane The boiler will be supplied with methane, for operation with LPG you must contact the local Authorised Assistance Centre Energy Efficiency Specifications according to European ErP Directive Heating Energy Efficiency Class: B Seasonal Energy Efficiency for Space Heating: 89% Performance Heating Thermal Capacity: 7.5 ~ 25.0 kW Heating Thermal Power: 7.2 ~ 24.2 kW Thermal efficiency ultile 30% Pmin : 100,1 % Domestic Hot Water Production 25°C Δt 30°C : 13.9 ~ 11.6 l/min NOx Emissions 6 Dimensions and Weight Dimensions (LxHxD): 400x700x330 mm Weight: 35 Kg Ferroli Divacondens D Plus Boiler The Simplest Solution For A Condensing Boiler DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The proven Ferroli technology in the field of traditional wall-mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator that preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. The Range Divacondens D Plus is offered in a single model for heating and instantaneous production of domestic hot water Characteristics > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct flow to systems with low temperature radiant panels > Compact geometry primary exchanger > Instantaneous production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, as a pre-heating function of the primary circuit > Sealed chamber and forced draught boiler, with water-cooled atmospheric burner with low NOx emissions > Automatic hydraulic by-pass as standard > Minimum polluting emissions (class 6 according to EN 15502-1) > High efficiency, low consumption circulator (ErP - Class A) with anti-blocking system through activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote control > Simple and complete control panel, display user interface, with setting buttons > Robust post-condenser powered by the primary closed circuit. Heat exchange with the flue gases occurs inside large diameter water passages. > Generator with simple and rational operation > ECO function in sanitary mode for greater savings in periods of low hot water usage > Solar system provision: provision for the production of domestic hot water combined with solar panel systems > Installation location: also for outdoor use in a partially protected place up to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) through a specific conversion to be requested from the Authorized Assistance Center > Also works with LPG using a special conversion kit to be requested from the Authorized Service Center Boiler check The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, you can easily adjust the heating flow temperature, the domestic hot water setpoint, turn the generator on/off or activate the comfort function, monitoring the boiler status. The control panel is completed by a traditional pressure gauge that can check the system pressure at any time. The performances Energy classification Domestic hot water load profile (maximum flow rate at the corresponding declared efficiency in domestic hot water) Efficiency in domestic hot water production FOR COMBINATION BOILERS The “climate-energy 20/20/20” package includes ambitious objectives for reducing greenhouse gas emissions, energy consumption and increasing the use of renewable energy, corresponding to a percentage of 20% to be achieved by 2020. In this context, the European ErP (Energy Related Products) regulation introduces an energy classification also for hot water generators for space heating and domestic hot water. This classification translates into an energy label that must accompany all products affected by the Regulation, introduced on the market from 26 September 2015. The labelling is an easy guide for the consumer, who can choose - through standardised and objective indications - the most efficient product. In this way the choice will be the most economical in consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the possible production of domestic hot water, according to a scale that in the case of the single boiler product ranges from A to G*. Furthermore, for combined boilers a load profile is indicated corresponding to the domestic hot water flow rate of the appliance measured in a series of standard samplings, guaranteeing at least the declared domestic hot water efficiency. This index is identified with a letter/”size” (S, M …XXL). Solar circuit integration DIVACONDENS D PLUS boasts electronics that simplify integration with solar thermal systems, both natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and turns on the burner only when necessary. To reach the desired temperature, SUN EASY allows significant savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. In the event of insufficient radiation and therefore modest preheating of the domestic water, the boiler will contribute with the heat necessary to reach the required setpoint temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. Safety and comfort ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator activates in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function allows you to recover all the heat provided by the thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (with customizable duration) and is active after the burner switches off in heating mode. SLIDING TEMPERATURE OPERATION By installing the “External probe” kit, it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment buttons, the boiler will self-regulate based on variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The DIVACONDENS D PLUS electronic board uses the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. The Opentherm standard has in fact been specifically designed to share the boiler's operating logic and algorithms with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the boiler's functions and similarly from its satellite. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! For the transformation of methane/LPG/free propane air to be requested from the Authorized Assistance Centre Warmhaus MINERWA The smallest and lightest boiler in the world With its minimal size, elegant design and technology, Minerwa can be installed in any environment. The Minerwa boiler will provide you with the necessary comfort thanks to its innovative technology, high flow rate, and ease of installation. Why choose Minerwa? The smallest and lightest condensing boiler Minerwa , with its dimensions 38x59.5 mm with a weight of 25.5 kg , is the smallest and lightest combi boiler in the world . High Efficiency with Gas Adaptive System The Minerwa ErP gas adaptive boiler provides high efficiency by continuously adjusting the air to gas combustion ratio ( 108% Efficiency ). Sanitary comfort for 2 users at the same time The heat exchanger can supply hot water up to 14.8 liters per minute giving the possibility of using 2 users at the same time . Completely safe Minerwa boilers heat you and your loved ones safely with its 23 different safety systems Elegant and Design Touch Glass Front Panel Minerwa offers a modern and elegant design with elegant corner lines, widescreen orange backlight, easy to use on-glass controls with different color options . Optimized energy consumption Minerwa boilers will provide you with the required comfort with the lowest possible consumption thanks to their wide modulation ( 1:10 modulation ) Energy Class The Minerwa boiler is fully compliant with the ErP directives of the European Union, both for gas and electricity consumption Long life With its single coil stainless steel heat exchanger and high quality components, Minerwa ofers long lasting and trouble free use over time Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! For the transformation of methane/LPG/free propane air to be requested from the Authorized Assistance Centre Technical features Model : Enerwa 24 Gas : Methane / LPG Hydraulic unit material : Brass Class : NOx 5 Gas circuit Natural gas consumption: 0.37 ~ 2.38 m 3 /h LPG gas consumption: 0.11 ~ 0.92 m 3 /h Efficiency : 108.3% Radiator circuit Maximum thermal load : 24.25 kW Maximum thermal power (80/60° C): 23.7 kW Maximum thermal power (50/30° C): 25 kW Thermal regulation range : 25° ~ 80° C Maximum working pressure: 3 bar Domestic hot water circuit Maximum domestic hot water capacity: 31.15 kW Maximum domestic hot water flow rate (∆t: 30°C): 14.8 l/min Maximum domestic hot water flow rate (∆t: 25°C): 17.9 l/min DHW temperature adjustment : 35° ~ 60 °C Electrical circuit Power supply (V,Hz, Ø) : 220~240/50/1 Power Consumption: 55~95W Dimensions and weight Dimensions (HxWxD): 725x420x288 mm Weight : 31.4Kg Warmhaus Enerwa and EnerwaPlus boilers The New Era of Boilers Combined wall boiler Enerwa and Enerwa Plus thanks to their small dimensions of only 288mm deep and their modern design are ideal for installation on balconies or inside kitchens Reliable and efficient The new self-adaptive system of the electronic gas valve precisely adjusts the combustion ratio between air and gas. No pre-heating system, the boiler keeps the water hot for the entire time of use. Effective circulation Circulator with frequency converter, it is a high efficiency pump with a head of 7 mwc Intelligent LCD display Large LCD display, the display shows the heating temperature, DHW and internal pressure System expansion 8 liter expansion vessel. The new expansion vessel is capable of supplying 130/140lt of water to the system Adaptive Gas Control With its signal it can provide simultaneous control of ionization and gas valve Highly economical It is a question of having an electrical consumption reduced to a maximum of 82W Hot water and continuous flow Asymmetrical exchanger system, provides a high flow input with its large water passages Pressure sensor to optimize performance Possibility to set the altitude of the boilers to optimize efficiency Silent operation Thanks to the 10mm internal lining, you work very silently and with excellent thermal insulation Processor specifications SMART WARMHAUS High efficiency High efficiency radial heat exchanger with low risk of clogging and leak proof. Panel features Selection buttons for mode, reset, heating and DHW Intuitive buttons for selecting the heating and DHW temperature Temperatures on LCD screen Flame modulation indicator Digital pressure gauge Self-diagnostic codes and system identification Different working parameters for boilers Differences between Enerwa and EnerwaPlus Energy Aesthetics Control Panel: 2 Knobs, 2 Buttons LCD display : 30 mm x 44 mm , Blue LCD screen , backlit Water pressure switch: EO2 low pressure alarm. Water pressure visible on the pressure gauge Self-regulating circulator EnerwaPlus Aesthetics Control Panel : 6 Buttons LCD display : 40 mm x 75 mm , Orange LCD screen , backlit Water pressure switch : Water pressure sensor. EO2 low pressure alarm. E03 high pressure alarm. Water pressure visible on pressure gauge and LCD screen Circulator with PWM (Pulse-Width-modulation) control Pulse-width modulation Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: BOILER CANNOT BE INSTALLED IN PIEDMONT AND LOMBARDY DUE TO CURRENT REGULATIONS. NB2: IN THE ABSENCE OF THE PRODUCT, WE WILL SHIP THE THEMIS CONDENS 27 KW MODEL Technical features ErP efficiency class in heating/DHW: B/A Sanitary load profile: XL Type: Heating and domestic hot water Heating Nominal power P min/max heating 80/60°C: 12.2/24.1 kW Partial load efficiency 30% 40/30 °C %: 99.7 Sanitary Min/Max Rated Power (60°C): 12.5/24.0 kW Specific flow rate (∆T=25 K): l/min 13.8 Electrical characteristics Max power consumption: W 60 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 720 x 405 x 330 mm METHANE version THEMIS CONDENS Themis Condens is the ideal condensing solution for replacing traditional wall-mounted boilers that work with high temperature radiators in apartments. The boiler has all the characteristics of simplicity in both installation and management. Themis Condens was developed to give the right comfort, both for the production of domestic hot water and to provide the ideal climate in the rooms. Specially designed for replacement in high temperature systems Small size Simplicity of management Reduced electricity consumption thanks to the instantaneous high efficiency pump Themis Condens combines the simplicity of the traditional boiler with the efficiency of condensing boilers. Themis Condens runs on methane and can be converted to run on propane. Themis Condens is available in the power of: 24kW for heating and 24kW for domestic hot water production. 27kW for heating and 27kW for domestic hot water production Characteristics: Can be installed indoors. Continuous domestic hot water (DHW) production up to 16 l/min Small dimensions: 72cm high, 40 wide and 33 deep (24 kW) The boiler features a new high-efficiency pump with high performance and a 7-litre expansion vessel. ErP efficiency class B in heating, A in DHW with XL profile. Reliability and Hermann Saunier Duval standard quality Specific for high temperature systems Large passages in the primary exchanger Reduced electricity consumption thanks to the high efficiency pump Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Unical KON X SLIM 24C condensing boiler complete with low NOx LPG fume exhaust kit - New Minimum/nominal useful power in condensing kW 3.22 ÷ 23.7 Heating efficiency class A Declared load profile L Sanitary efficiency class A Efficiency at nominal thermal power in high temperature regime (Tr 60°C / Tm 80°C) η4 % 88.7 production DHW cont. Dt 25 K (mixed) l/min 13.2 Total expansion tank capacity l 9 (6+3) IP X5D degree of protection NOx class 5 Dimensions HxWxD mm 800x520x180 KON X SLIM KONx SLIM is a condensing boiler running on methane or LPG, with instantaneous production of domestic hot water. Covered with a satin finish AISI 304 stainless steel casing, it is ideal for outdoor installations, but equally elegant indoors. KONx SLIM is: Performant 24 and 35 kW (Range rated) Modulation ratio 1:8 Low NOx class 5 High energy efficiency A+ (System) the top of the category, >98% Hs (superior calorific value) Insulated and protected IP X5D, suitable for outdoor installation according to current standards (up to -15°C with antifreeze kit) Extremely compact with its depth of only 18 cm, Unical's record among wall-hung condensing boilers KONx SLIM, thanks to the RCh chronothermostat, OT multiprogram modulator, connected to the ambient and external probes supplied as standard, reaches seasonal efficiency equal to energy class A+ in heating. HWS "Hot Water Speed" is the new KONx SLIM electronics that switches from heating to DHW function with burner and pump always active, considerably improving user comfort who does not have to wait for hot water. Covered with a satin-finish AISI 304 stainless steel casing with a tapered-edge casing finish, KONx SLIM appears to have an essential and very elegant line, combining, with its hi-tech style, with the other appliances in the house Super small size depth of only 18cm Management of 2 temperature zones (high/low) by applying a second on/off thermostat Sliding temperature programmed to operate with the lowest possible delivery temperature to help save energy Intelligent system filling to guarantee functionality If the pressure is below 0.4 bar in the system circuit, the automatic water filling starts for 30 seconds once a day. If the request is repeated several times, a warning signal appears on the remote control Anti-overheating post-circulation automatically after the burner goes out, the boiler keeps the pump running for 5 minutes, preserving the components Chimney sweep function allows maintenance technicians to carry out the checks required by current standards in terms of efficiency and emissions Multigas operation (natural gas or LPG) with simplified switching Double expansion tank If necessary, it can mount an external auxiliary expansion tank (optional) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

OFFER VALID UNTIL STOCKS LAST! LPG operation with the special conversion kit included as standard Technical features Model: Class B One Product code : 3301211 Typology : Sealed chamber Power supply: methane/LPG Energy efficiency Heating energy efficiency class: A Sanitary energy efficiency class: A ACS profile : XL Performance Heating capacity: 3.7 ~ 22.0 kW Nominal heat input in DHW : 3.7 ~ 26.0 kW Useful thermal power in heating: 3.5 ~ 21.5 kW Returns Efficiency at nominal heat input 60° / 80°C: 97.7% Efficiency at nominal heat input 30° / 50°C: 106.1% Efficiency at 30% at 30°C : 109.8% Performance High temperature heating temperature : 35° ~ 82°C Low temperature heating temperature : 35° ~ 82°C DHW temperature : 36° ~ 65°C Quantity of hot water deltaT 25°C : 22.6 l/min Quantity of hot water deltaT 35°C : 16.1 l/min Specific flow rate : 18.8 l/min Minimum operating temperature : > 0°C Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Total absorbed electrical power: 85.6 W Degree of protection : IP X5D Dimensions Dimensions (LxHxP): 600x900x474 mm Wall mounted boiler Ariston CLAS B ONE Condensing boiler with integrated storage tank of 40 l The simplest solution for a condensing boiler New communication protocol set up to ensure complete system management Comfort function It speeds up hot water dispensing in two modes: Comfort Plus mode, always hot water in just 5'' and Comfort mode which allows you to have hot water for 30' after the last draw. Auto function Maximum comfort, efficiency and energy savings based on the automatic analysis of the environmental conditions, connected external devices and required performance Super Silence Silent operation in all operating modes Characteristics XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head Exchanger passage sections +142% compared to the previous version Modulation ratio 1:7 2 stainless steel stratification boilers of 20 l Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: BOILER CANNOT BE INSTALLED IN PIEDMONT AND LOMBARDY DUE TO CURRENT REGULATIONS. NB2: IN THE ABSENCE OF THE PRODUCT, WE WILL SHIP THE THEMIS CONDENS 27 KW MODEL THIS MODEL IS USED EXCLUSIVELY TO CNG, BUT IT CAN BE CONVERTED TO LPG FREE OF CHARGE THROUGH AN AUTHORIZED SAUNIER DUVAL SERVICE CENTER Technical features Model: ErP efficiency class in heating/DHW: B/A Sanitary load profile: XL Type: Heating and domestic hot water Heating Nominal power P min/max heating 80/60°C: 12.2/24.1 kW Partial load efficiency 30% 40/30 °C %: 99.7 Sanitary Min/Max Rated Power (60°C): 12.5/24.0 kW Specific flow rate (∆T=25 K): l/min 13.8 Electrical characteristics Max power consumption: W 60 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 720 x 405 x 330 mm LPG version THEMIS CONDENS Themis Condens is the ideal condensing solution for replacing traditional wall-mounted boilers that work with high temperature radiators in apartments. The boiler has all the characteristics of simplicity in both installation and management. Themis Condens was developed to give the right comfort, both for the production of domestic hot water and to provide the ideal climate in the rooms. Specially designed for replacement in high temperature systems Small size Simplicity of management Reduced electricity consumption thanks to the instantaneous high efficiency pump Themis Condens combines the simplicity of the traditional boiler with the efficiency of condensing boilers. Themis Condens runs on methane and can be converted to run on propane. Themis Condens is available in the power of: 24kW for heating and 24kW for domestic hot water production. 27kW for heating and 27kW for domestic hot water production Characteristics: Can be installed indoors. Continuous domestic hot water (DHW) production up to 16 l/min Small dimensions: 72cm high, 40 wide and 33 deep (24 kW) The boiler features a new high-efficiency pump with high performance and a 7-litre expansion tank. ErP efficiency class B in heating, A in DHW with XL profile. Reliability and Hermann Saunier Duval standard quality Specific for high temperature systems Large passages in the primary exchanger Reduced electricity consumption thanks to the high efficiency pump Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

BUILT-IN UNIT NOT INCLUDED! TO PURCHASE RECESSED UNITS CLICK HERE Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL Nominal heat input 24.7 kW Nominal thermal power 24 kW Energy efficiency (92/42/EEC) **** Nominal efficiency 80/60°C % 97.7 Return at 30% % 108.8 Heating circuit water temperature control °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 13.8 Minimum domestic water flow rate: 2 l/min Minimum operating temperature: -15°C Expansion/pre-charge vessel capacity l/bar: 8/0.8 NOx class (EN 483): 5 Dimensions (hxlxp) - with case: mm 1170 x 600 x 245 Dimensions (hxwxd) - boiler 770 x 470 x 238 mm; 32.5kg Power supply: METHANE Luna Duo-Tec IN+ The efficiency of compact built-in comfort Baxi has always offered the ideal system solution for any type of home: for this reason the Duo-tec+ range is expanding with built-in models and for outdoor installation. Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also in new installations. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of ) Recessed installation outdoors Luna Duo-tec IN+ is the built-in condensing boiler, specifically designed to make it suitable for replacing an old built-in generator but also in new installations. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments, and in general in all housing units where efficient space management is an important objective (for example in technical rooms or in the presence of ). Inside the packaging there are the bracket and installation fittings for inserting the boiler into the containment box Characteristics: Wide modulation range up to 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Automatic plant loading system Minimum operating temperature: -15°C Remote digital control panel with LCD display Arrangement for combination with the Baxi integrated solar system High efficiency circulation pump with total modulation Ultra-compact dimensions: 770x470x238 mm (boiler) STANDARD installation kit (gas cock / gas inlet / telescopic fittings) Antifreeze function and IPX5D degree of protection Digital control panel The Duo-tec+ range of boilers is equipped with a digital control panel with backlit LCD display, easy to use thanks to dedicated and independent keys to adjust the temperature of the domestic hot water and the heating. The display allows you to view all the information and set the operating parameters in a clear and immediate way. Gas Adaptive Control The innovative GAC ( Gas Adaptive Control ) automatic combustion control system guarantees a wide modulation range up to 1:10: high efficiency and energy savings are ensured as the boiler is able to adjust the thermal power produced to the actual power dissipated from the building avoiding excessive heating/cooling of the building. Antifreeze function The boilers have been designed to allow the boiler to operate down to -15°C. Furthermore, the antifreeze function provides for the automatic ignition of the burner, avoiding freezing phenomena. Wide modulation range 1:7 greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adjustment of the thermal power produced to the power dissipated thus avoiding excessive overheating/cooling of the premises Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO SuperEVOdens 24 S* METHANE CONDENSING Boiler Complete with Fume Exhaust Kit - ErP Model: SuperEVOdens 24S ErP specifications Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Heating/DHW nominal heat input: 25 kW Heating/DHW maximum useful power: 24.4 kW Yield name 60°/80°C: 97.4% Yield at 30% load: 98.9% High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) NOx class 2 Weighted NOx: 166 mg/kWh Minimum/maximum heating temperature: 40/85°C Minimum/maximum heating pressure 3.0/0.3 bar Expansion vessel capacity 8 l (total) Minimum/maximum domestic hot water temperature 35/60°C Maximum flow rate (ΔT=25K)/(ΔT=35K): 13.9/10 l/min Specific sanitary flow rate (ΔT=30 K): 11.6 l/min Voltage / Power at nominal heat input V~/ W 230/82 IPX4D degree of protection Dimensions HxWxD 803x400x350; 42.5 kgs Power supply: methane or LPG Standard Digital electronic room thermostat Boiler support bracket and paper template Condensate collection siphon Quick instruction to the user SuperEVO dens SuperEVOdens is the condensing boiler designed for traditional systems and easily adaptable to new underfloor systems using SIMpatico, a hot water distribution device for heating Savings and ease of use SuperEVOdens maintains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler deriving from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads SuperEVOdens to have higher yields than traditional boilers. High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Copper lamellar primary heat exchanger with large exchange surface and double circulation Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Digital control panel with backlit display Electronic card for: - Restart frequency adjustment - Adjustable primary circuit thermal inertia disposal - Circulator mode selection - Circulator anti-seize - Antifreeze safety - Chimney sweep function Integrated automatic by-pass 8 liter expansion vessel Immunity to radio interference Magnetic sanitary flow switch Absolute heating pressure switch IPX4D degree of protection High circulation primary exchanger It is the element that distinguishes the entire Savio range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system and facilitates the transmission of heat to the radiators. Heat recovery The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator is made of aluminium, has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly Command panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO SuperEVOdens 28 S* LPG CONDENSING Boiler Complete with Fume Exhaust Kit - ErP Model: SuperEVOdens 24S ErP specifications Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Heating/DHW nominal heat input: 25 kW Heating/DHW maximum useful power: 24.4 kW Yield name 60°/80°C: 97.4% Yield at 30% load: 98.9% High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) NOx class 2 Weighted NOx: 166 mg/kWh Minimum/maximum heating temperature: 40/85°C Minimum/maximum heating pressure 3.0/0.3 bar Expansion tank capacity 8 l (total) Minimum/maximum domestic hot water temperature 35/60°C Maximum flow rate (ΔT=25K)/(ΔT=35K): 13.9/10 l/min Specific sanitary flow rate (ΔT=30 K): 11.6 l/min Voltage / Power at nominal heat input V~/ W 230/82 IPX4D degree of protection Dimensions HxWxD 803x400x350; 42.5 kgs Power supply: methane or LPG Standard Digital electronic room thermostat Boiler support bracket and paper template Condensate collection siphon Quick instruction to the user SuperEVO dens SuperEVOdens is the condensing boiler designed for traditional systems and easily adaptable to new underfloor systems using SIMpatico, a hot water distribution device for heating Savings and ease of use SuperEVOdens maintains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler deriving from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads SuperEVOdens to have higher yields than traditional boilers. High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Copper lamellar primary heat exchanger with large exchange surface and double circulation Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Digital control panel with backlit display Electronic board for: - Restart frequency adjustment - Adjustable primary circuit thermal inertia disposal - Circulator mode selection - Circulator anti-seize - Antifreeze safety - Chimney sweep function Integrated automatic by-pass 8 liter expansion vessel Immunity to radio interference Magnetic sanitary flow switch Absolute heating pressure switch IPX4D degree of protection High circulation primary exchanger It is the element that distinguishes the entire Savio range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system and facilitates the transmission of heat to the radiators. Heat recovery The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator is made of aluminium, has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly Command panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Heat and DHW energy efficiency class (ErP) A For heating and domestic hot water production Forced draft sealed chamber Declared load profile XL Nominal heat output: 24 kW Nominal heat input: 24.7 kW Useful thermal efficiency at nominal power 40/30 °C: 101% Useful thermal efficiency at 30% nominal load 40/30 °C: 109% Continuous sanitary production: 14 l/min Sanitary temperature range that can be set: 40/60°C NOx class: 5 Degree of protection: IP X4D Dimensions (Depth x Width x Height): 365 x 400 × 815 mm; 44kg Version: LPG NB: The smoke exhaust KIT is compatible CERAPUR COMPACT CERAPURCOMPACT combines maximum efficiency and high comfort in terms of heating and domestic hot water production with an excellent price/performance ratio. Condensation has never been so convenient! Advantages ▶New! ZWB 24-1 DE, ZWB 28-1 DE ▶Wall-mounted condensing boilers, with DHW production, which can be combined with DHW thermal solar systems. ▶B23, B33, C13, C33, C43, C53, C63, C83, C93 type certifications obtained. ▶ Suitable for use with Ø 60 mm drains. ▶ Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. ▶ Bosch Heatronic to BUS system with LCD display. ▶ High range of continuous power modulation (DHW and heating 1:8). ▶ Electronic conversion from natural gas to LPG (and vice versa). ▶ Patented active and passive solar optimization algorithm SolarInside-ControlUnit. ▶ Modulating fan and premix burner. ▶ Three-speed circulator (models ZWB ..-1 D) or in Energy Class A (models ZWB ..-1 DE, ZSB ..-1 DE). ▶ Patented high-efficiency silicon-aluminum alloy primary heat exchanger. ▶ Oversized sanitary plate heat exchanger for condensing also in DHW (ZWB). ▶ 8 liter heating side expansion vessel. ▶ Installation plate or dedicated fittings for hydraulic connections (accessories). ▶ Filling valve on the heating side. ▶ Possible remote management via MB LAN or Netcom 100 modules (accessories) which can be combined with FR 120, CR 100 or FW..., CW ... thermoregulators ▶ Outdoor installation, in a partially protected place, in compliance with current legislation. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON GENUS PREMIUM EVO 24 EU CONDENSING BOILER COMPLETE WITH LPG FUME EXHAUST KIT - NEW ErP Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 22/2.5 Max/min heating thermal power (80°C-60°C) kW 21.5/2.4 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 109 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 12.2 Quantity of hot water ∆T=25°C litres/min 14.56 Quantity of hot water ∆T=35°C litres/min 10.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 70 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/400/315 CNG or LPG power supply Kit for conversion from methane to propane supplied Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO : energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the Energy Certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Genus Premium Evo The Genus Premium Evo wall-mounted boiler is the maximum expression of the Ariston range. Thanks to the condensing technology, by recovering the energy of the exhaust fumes, it generates an increase in the calorific value which makes it possible to eliminate waste (of energy) and to obtain higher thermal efficiency than conventional boilers. Genus Premium Evo offers even greater performance thanks to the innovative technology that allows it to self-regulate according to variations in the external and internal temperature of the room, allowing energy savings of up to 35% compared to an older generation boiler. It is available in the heating and domestic hot water production version in 3 powers: 24-30-35 kW (sealed chamber). Characteristics: Can be installed in partially protected places Large backlit dot matrix screen Continuous modulation high-efficiency circulator: for optimizing consumption and maximizing performance. Modulation ratio 1:10 - Automatic power regulation according to the heating request. Acoustic comfort guaranteed by the lower number of boiler on and off cycles, new silencer and sound-absorbing panels Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort Isothermal primary heat exchanger in stainless steel Increased sanitary exchanger Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo thanks also to the high modulation ratio of 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less