Chaffoteaux Condensing Boiler mod. NIAGARA ADVANCE 25 C low NOx Complete with CNG exhaust kit 3310626 Code: 3310626 Power 25 kW Energy class in heating A Energy class in sanitary A XL withdrawal profile Dimensions HxWxD 900 x 600 x 460 mm Technical data Nominal heat input in heating max/min (Hs) Qn 22/2.5 kW kW Max/min DHW nominal heat input (Hs) Qn 26.0/2.5 kW kW Efficiency at nominal heat input (60/80°C) Hi/Hs 97.7/87.9% % Performance stars (dir. 92/42/EEC) **** NOx class 6 Expansion tank capacity 8l Power supply voltage/frequency 230 / 50 V/Hz Degree of protection of the electrical system IP X5D NIAGARA ADVANCE Niagara Advance , a concentrate of performance, comfort and compactness, combines the technology of the new Advance range with two 20-litre boilers to meet the most demanding domestic hot water needs. MAXIMUM PERFORMANCE New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. MAXIMUM COMFORT Modulation ratio 1:10. Optimized internal silencer. SRA function. Gas transformation with kit included as standard. Ready for Chaffolink connectivity. HEALTHCARE COMFORT 40 liter reserve thanks to two stratified stainless steel inter-accumulators. Permanent availability of domestic hot water even with discharged inter-tanks. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate up to 19.8 l/min with ΔT = 25ºC. Integrated 2-litre sanitary expansion tank. EASY INSTALLATION Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 20% energy savings in combination with Expert Control and the SRA function. Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. CERTIFIED OPERATION ALSO ON LPG USING THE SPECIAL KIT TO BE REQUESTED IN ADVANCE FROM THE AUTHORIZED SERVICE CENTER OF THE AREA Ferroli Floorstanding Boiler Bluehelix B 35 kW Methane or LPG complete with Fume Exhaust Kit - New ErP ERP Class (Class G - A++) A Thermal input (PCI) Min / Max Heating kW 6,7 / 32,0 Thermal power 80°C-60°C Min / Max Heating kW 6,6 / 31,4 Thermal power 50°C-30°C Min / Max Heating kW 7,2 / 34,0 Emission class Nox class 6 Dimensions HxWxD 850x400x595 BLUEHELIX B on base > STRONG POINTS: It achieves one of the highest seasonal space heating efficiency in its category: ηs 94% (mod. 35 only) in combination with the modulating remote control and the external probe (optional) it reaches the higher efficiency class A+ (scale from G to A+++) (mod. 35 only) Primary heat exchanger in stainless steel Total premix burner in stainless steel with wide modulation range Low consumption modulating heating pump (Erp Ready - Class A) Digital controls with user interface display, multifunctional for easy and correct parameter setting Can be combined with the modulating remote timer control Easily accessible water and gas connections to facilitate the replacement of old generators Fumes discharge with split or coaxial pipes; possibility of left and right side exit, rear > BENEFITS OF BLUEHELIX B: Minimum polluting emissions (class 6 according to EN 15502-1) Sliding temperature operation in combination with the optional external probe Protection function of the exchanger with Δt control Timed circulator anti-blocking Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only in methane operation) Antifreeze function with standard protection down to -5°C Free methane/LPG/propaneted air transformation when checking the product and activating the warranty, to be requested from the Authorized Assistance Center Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

PIGMA ADVANCE 35 kW EU Chaffoteaux condensing boiler complete with flue kit Technical features Energy class in heating: A Energy class in sanitary: A Load profile: XL Heating performance: Thermal input (min./max): 31/3.5 kW Useful power (min./max.): 34.4/3.9 kW Useful thermal efficiency: 98.0 % Idle efficiency (60/80°C): 91.1 / 82% Max/min useful heating power (80°C-60°C): 27.4/3.9 kW Performance stars (dir. 92/42/EEC): **** Healthcare performance Min/max domestic hot water temperature: 36 / 90 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 16.7 l/min Instantaneous quantity of hot water ∆T=25°C: 20.4 l/min Instantaneous quantity of hot water ∆T=35°C: 14.5 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Max/min domestic water pressure: 7.0 / 0.2 bar Characteristics Protection index IPX5D Class 6 NOx Energy efficiency index of the circulator: EEI ≤ 0.23 Minimum ambient temperature of use: >0°C Total absorbed electric power: 80 W Power supply: METHANE (G20/G30) Dimensions (HxWxD): 745x400x385mm; Weight: 29.7kg PIGMA ADVANCE Pigma is the new CHAFFOTEAUX boiler, which is part of the Advance Range, resulting in the category leader with a completely renewed design, using the innovative SpinTech exchanger, electronic combustion control, integrated Chaffolink connectivity and Expert Control and external probe as standard, guaranteeing extremely high performance with extremely low fuel consumption. Can be installed in partially protected places. SpinTech features: Exchanger that works with a stainless steel monospiral New single coil primary heat exchanger in stainless steel Passage sections increased by 142% compared to the previous version 1 m more head Seasonal yield at 94% Class A+ thanks to the standard thermoregulation accessories Performance certified by the TÜV RHEINLAND Group. Give Comfort: Modulation ratio 1:7 Optimized internal silencer SRA function Gas transformation with kit included as standard Ready for Chaffolink connectivity Advantages: Installation in partially protected places Smoke outlets 80, 60, 50 mm Intuitive electrical connections Up to 20% energy savings in combination with Expert Control and the SRA function Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 35 CS/1-5 CFI Article code : 0010022025 Power supply: methane or LPG Performance Heating power : 4.0 ~ 34.1 kW DHW power : 4.0 ~ 34.1 kW Withdrawal flow rate (ΔT = 30K) : 16.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 105.2% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 39.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart, they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water boiler. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features: Heating energy efficiency Class A; Sanitary energy efficiency profile XL Class A; Nominal heat input 25 kW; Sanitary thermal capacity: 32 kW; Nominal thermal power 6 kW; Expansion capacity: 10 l; Quantity of hot water with Δt=25°C: 18 l/min; flow rate sanitary water: 2 l/min; Sanitary water temperature: 35 - 60°C; Power supply: Methane NOx class 5; Max temperature pressure /°C3/90 bar; Pressure (min./max.): -/8 bar; Boiler capacity: 60 l; Pump: from max system to flow rate mbar /lt/h 375 / 1000; Smoke exhaust kit; General characteristics Effective and Safe The boiler is made up of control systems for the presence of the flame, the correct emission of fumes, temperatures and pressures. It is also equipped with a circulator and a three-way valve with anti-blocking cycles which guarantee correct operation. The boiler allows climatic regulation, which can be activated via the external probe set up for connection to the Beretta remote control panel (optional) which allows you to easily check and check the status of the appliance. High technology Mynute Boiler Green, thanks to the stainless steel kettle, is able to dispense a lot of hot water. The accumulation is equipped with a magnesium anode to offer protection against stray currents and, thanks to the wide flange, the boiler is easily inspectable. To reduce gas consumption, protective insulation is used which prevents the water from cooling down, minimizing the need to ignite the burner to bring the storage back up to temperature. Mynute Boiler Green also offers a standard DHW expansion vessel and is equipped with a predisposition for DHW recirculation (via optional kit). Thanks to the display on the dashboard, information on the status of the appliance is immediately available. Filling the system is easy to do through the appropriate tap.  The new Mynute Boiler Green is equipped with a simple control panel. Composed Two knobs that allow you to select all the functions necessary for using the boiler. The heating knob also allows activation of the Amico Climate System. FRIENDLY CLIMATE system: And the function that manages according to the external climatic situation, regulates the temperature inside the house, in fact it is active only when the delivery temperature in heating mode is set between 55 and 65 °C, in fact it automatically increases by 5 ° C every 20 minutes if heat is required. Dimensions (HxWxD): 950x600x450mm; 61kg

Read more less

GAS BOILER UNICAL KON M C35 CONDENSING + FUME KIT - ErP KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion. The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. “Quick release” condensate drain manifold Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

URBIA ADVANCE LINK 30 kW Chaffoteaux condensing boiler free flue kit with 4 liter micro-accumulator Integrated Wi-Fi - ErP new Reference 3310610 MET/LPG/AP gas Energy class in heating A Energy class in sanitary A XL withdrawal profile Weight 42kg Dimensions (Height x Width x Depth) 745 x 440 x 460 mm ENERGY PERFORMANCE Nominal heat input in heating max/min (Hi) Qn 28 / 3.0 kW Nominal heat input in heating max/min (Hs) Qn 31.1 / 3.3 kW Max/min DHW nominal heat input (Hi) Qn 30.0 / 3.0 kW Max/min DHW nominal heat input (Hs) Qn 33.3 / 3.3 kW Heating output max/min (80°C-60°C) Pn 27,3 / 2,8 kW Heating output max/min (50°C-30°C) Pn 29,7 / 3,1 kW DHW max/min useful power Pn 28.8 / 2.9 kW Efficiency at 30% of Qn with return to 30°C Hi/Hs 106.1 / 95.6% Performance stars (dir. 92/42/EEC) **** SANITARY CIRCUIT Min/max DHW temperature 40 / 65 °C Instantaneous quantity of hot water ?T=25°C 18.1 l/min Sanitary comfort stars (EN13203) *** ELECTRICAL DATA Power supply voltage/frequency 230 / 50 V Total absorbed electrical power 98.1 W Degree of protection of the electrical system IP X5D URBIA ADVANCE LINK Urbia Advance Link represents the perfect mix between sanitary comfort and reduced consumption. It stands out for its 4-litre micro-accumulator, electronic combustion control and integrated Chaffolink connectivity and standard Expert Control. MAXIMUM PERFORMANCE: SPINTECH New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. MAXIMUM COMFORT Modulation ratio 1:10. Electronic combustion control E-Burning System. SRA function. Gas transformation from the technical menu without the need for a kit. Chaffolink connectivity integrated in the boiler. External temperature from the internet thanks to integrated connectivity. HEALTHCARE COMFORT Integrated mini-accumulator in 316L stainless steel of 4 liters. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate from 16.0 to 20.1 l/min with ?T = 25ºC. DHW production controlled by a modulating pump to respond to needs without waiting times and at a constant temperature, even when withdrawals are very small. DHW programmer to control the storage heating time slots. EASY INSTALLATION Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS MADE TO ORDER NB The boiler will be supplied with methane. For operation with LPG or propane air, contact the local authorized assistance center in advance. Technical features Model : LUNA STYLE 35 Code: A7754006 Heating nominal heat input: 28.9 kW DHW nominal heat input: 34.9 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: A Sanitary Energy Efficiency Class: A Withdrawal profile: XL Seasonal space heating energy efficiency ŋs: 94/98 % Water heating energy efficiency ŋwh: 88.1% Useful efficiency at 30% thermal power. name and low temperature regime. **ŋ1: 99.0 Useful efficiency (pci) at 30% - return temperature 30°C: 109.9% Useful efficiency (pci) intermediate - average temperature 70°C: 98.4% Dimensions and weight Dimensions (hxwxd): 763x450x334 mm Net weight: 32kg Description 98% energy efficiency thanks to the advanced technology applied Backlit color control panel, icons for parameter display, clear descriptions via large text display, adjustment knob and menu selection keys Wide modulation range 1:10 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Power set: heating power adjustment according to project data Hydraulic group in brass Connection to pressurized collective flues Natural gas boilers convertible to LPG and propane air (conversion kit not required) Antifreeze function and IPX5D degree of protection Operation with a mixture composed of up to 20% hydrogen Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 35 CS/1-5 Article code : 0010022024 Power supply: methane or LPG Performance Heating power : 4.0 ~ 34.1 kW DHW power : 4.0 ~ 34.1 kW Withdrawal flow rate (ΔT = 30K) : 16.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 105.2% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 39.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE STANDARD TRANSFORMATION KIT WILL BE SUPPLIED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE ARISTON CONDENSING BOILER CLAS ONE SYSTEM 35 kW LPG COMPLETE WITH OPTIONAL Wi-Fi FUME KIT - NEW ErP Technical features Product code: 3301032 Energy label specifications according to the European ErP directive Class A heating energy efficiency Combustion and Efficiency: Nominal heat input max/min heating: kW 31.0-5.0 Heating max/min useful heat output: kW 30.2-4.7 Efficiency at nominal heat input (60/80°C): 97.5% Efficiency at 30% (30°C): 109.6% Performance: Heating max/min temperature (high temperature) °C 82-35 Heating max/min temperature (low temperature) °C 45-20 DHW max/min temperature °C 60-40 Minimum operating temperature (-5°C with antifreeze kit)**> 0° Characteristics: Total absorbed electric power W 84 Degree of protection of the electrical system IP X5D Dimensions 24 kW mm (HxWxD) 745 x 400 x 385 Installation in partially protected places Power supply: methane or LPG XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. CLAS ONE SYSTEM Condensing boiler for heating only, ideal for creating systems (hybrid, solar, boiler with external storage tank). It is built on the basis of the new ONE Series Per4mance System with four technologies that ensure particularly high performance. Durability maximized thanks to the Ariston exclusive XtraTech™ heat exchanger Compact structure for easy installation LCD display Compatible with the CUBE S NET Wi-Fi thermostat which allows connection to the Ariston NET App Compatible with the Ariston NET App for remote control AUTO FUNCTION maximum comfort, efficiency and energy savings based on the automatic analysis of the environmental conditions, connected external devices and required performance. COMFORT FUNCTION speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last tap). SMALL SIZE small footprint for easy installation. SYSTEM MANAGEMENT new communication protocol set up to guarantee complete management of the system. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caldaia Biasi rinNova adaptive 35s a condensazione low NOx completa di kit scarico fumi Metano o Gpl  Portata termica nominale riscaldamento/sanitario kW 31,0 / 34,7 Portata termica minima riscaldamento/sanitario kW 3,8 / 3,8 Potenza utile massima riscaldamento/sanitario 60°/80°C * kW 30,6 / 34,1 Potenza utile minima riscaldamento/sanitario 60°/80°C * kW 3,6 / 3,6 Potenza utile massima riscaldamento/sanitario 30°/50°C ** kW 28,3 / 33,7 Potenza utile minima riscaldamento/sanitario 30°/50°C ** kW 4,0 / 4,0 Rendim. nom. 60°/80°C * % 98,8 Rendim. min. 60°/80°C * % 94,5 Classe NOx 6 Temperatura minima/massima riscaldamento **** °C 25 / 80 Pressione minima/massima riscaldamento bar 0,3 / 3 Capacità del vaso espansione (totale/utile) l 7 Temperatura minima/massima sanitario °C 35 / 55 Pressione minima/massima sanitario bar 0,3 / 10 Portata massima (ΔT=25 K) / (ΔT=35 K) l/min 20,5 / 14,3 Tensione/Potenza alla portata termica nominale V~/ W 230 / 116 Potenza alla portata termica minima W 55 Grado di protezione IPX5D Temperatura dei fumi minima/massima # °C 41 / 80 Altezza x Larghezza x Profondità mm 700 x 400 x 300 Peso kg 36 Contenuto d’acqua della caldaia l2,5 Codice 10314.2076.0 RinNova adaptive La caldaia a condensazione RinNova Adaptive, a differenza delle caldaie tradizionali, consente di recuperare energia condensando il vapore acqueo contenuto nei fumi di scarico; cioè, a parità di calore prodotto, consuma meno gas ed inoltre i fumi di scarico contengono meno sostanze dannose per l’ambiente. I materiali che la compongono e i sistemi di regolazione di cui è dotata offrono sicurezza, comfort elevato e risparmio energetico, così da poter apprezzare al massimo i vantaggi del riscaldamento autonomo.RinNova Adaptive è il nuovo modello BIASI di caldaia murale a condensazione.Offre ottime prestazioni e alti rendimenti che durano nel tempo, grazie all’innovativo scambiatore di calore. Semplice da utilizzare grazie al pannello di controllo digitale, con display progettato per comunicare con l’utente in maniera facile e comoda. Caratteristiche tecniche Caldaia con scambiatore primario in acciaio inox mono circuito, privo di giunzioni e/o saldature, che mantiene un’alta efficienza anche su impianti non recenti Nuovo sistema di combustione con tecnologia brevettata gas-adaptive (Advanced Adaptive Gas Combustion Control – A²GC²) L’elettronica analizza continuamente la combustione (CO2) attraverso il segnale di fiamma e interviene agendo sulla valvola gas e sul ventilatore, per permettere una corretta combustione in tutte le condizioni d’utilizzo. L’elettronica permette di adattare facilmente la caldaia ai vari tipi di gas senza dover intervenire con kit di trasformazione meccanica Produzione istantanea di acqua calda sanitaria con scambiatore a piastre dedicato Funzione Prerirscaldo Sanitario: maggior rapidità nell’erogazione di acqua calda sanitaria Interfaccia utente con display e tasti multifunzione per la regolazione e l’impostazione dei parametri By-pass di serie facilmente ispezionabile Sistema Protezione camino: gestione elettronica delle sovratemperature fumi, garantendo la massima protezione del camino Intubamento su canne fumarie: particolarmente adatta al funzionamento in canne fumarie che necessitano di intubamenti che presentano alte perdite di carico Minime emissioni inquinanti (classe VI - EN 15502-1) Funzionamento a temperatura scorrevole tramite sonda esterna opzionale Circolatore riscaldamento modulante a basso consumo (ErP Ready - Classe A) Controllo fiamma digitale a tre tentativi di riaccensione in caso di blocco funzionamento per mancanza di rilevazione fiamma (configurazione a metano) Mantellatura smontabile in tre pezzi per una più semplice manutenzione o ispezione Per versioni SV: possibilità di impostare la potenza massima erogabile al bollitore esterno Tecnologia Gas AdaptiveMeno consumi, più efficienza, meno emissioniL’innovativa tecnologia Adaptive Gas, di cui sono dotati tutti i modelli della linea Rinnova, consente l’adattamento in completa autonomia delle caldaie alle diverse tipologie e qualità di gas. L’elettrodo, oltre a rilevare la fiamma, rileva anche le caratteristiche del gas e adatta automaticamente i parametri di combustione per mantenere il massimo livello di efficenza, con conseguente riduzione dei consumi e delle emissioni rispetto ai sistemi di controllo tradizionale. ll sistema Adaptive gas rende la caldaia predisposta a funzionare con qualsiasi tipo di gas senza trasformazioni. Regolazione automatica del gas Adattamento al cambio della qualità del gas Combustione pulita Unico modello adatto a metano e GPL che consente di ottimizzare il magazzinio Nelle caldaie tradizionali i valori della combustione vengono rilevati e regolati solo in fase di manutenzione, inoltre la composizione dei gas di rete non è sempre costante e può creare sulle caldaie prive di dispositivi di controllo della combustione inefficenze del funzionamento compromettendo l’affidabilità, i risparmi e la qualità delle emissioni. Grazie al sistema Gas-Adaptive, le nuove caldaie a condensazione controllano elettronicamente la combustione gestendo al meglio ed in ogni momento l’apporto di gas e aria, adattando automaticamente la CO2. Una produzione "Plastic-FREE"Per un ambiente più sostenibileUn elemento fondamentale che ha guidato tutta la fase di progettazione della nuova caldaia Rinnova Adaptive è la forte attenzione nei confronti dell’economia circolare. Per questo abbiamo impiegato componenti con un maggiore tasso di riciclabilità, eliminando il più possibile l’utilizzo della plastica. Il gruppo in plastica, ad esempio, è stato sostituito con il gruppo in ottone, materiale completamente riciclabile. I gusci di protezione della caldaia sono stati realizzati in cartone e non più in polistirolo. Il frontale, inoltre, non è più in plastica ma in acciaio stampato. TermoregolazioneRegolazione climatica (con sonda esterna opzionale) e regolazione ambiente (remoto) per permettere una corretta gestione della temperatura dell’acqua allo scopo di ridurre i consumi e conseguentemente una riduzione delle emissioni.Utilizzando la regolazione climatica anche il rendimento di regolazione si innalza, conferendo maggior valore all’abitazione. Scambiatore primario monospira ad alta circolazioneBiasi, introduce nel 2017 lo scambiatore Round. Dimostrata la grandissima affidabilità lo addotta nella gamma Rinnova Adaptive. Round è uno scambiatore di calore monotermico compatto basato su una serpentina di acciaio inox con una sezione ovale. Lo scambiatore di calore è costituito da una camera di combustione, zona di condensazione e un disco metallico coibentato protetto con fibra ceramica siliconica che separa le due aree.Utilizzando un singolo nastro di acciaio inossidabile per produrre la serpentina, compresi attacchi ingresso/uscita, si ottengono i seguenti vantaggi: Si evita l’accumulo di sporco e detriti La portata acqua è distribuita uniformemente e garantisce uno scambio termico omogeneo La portata acqua è costante per una più lunga vita del prodotto Riduzione delle perdite di carico con circuito ottimizzato La facilita di pulizia e la robustezza di tale scambiatore sono uno dei principali punti di forza del prodotto dato che può essere utilizzato su impianti nuovi ma anche su impianti vecchi in caso di ristrutturazioni. Round integra la funzione round flow nella quale l’acqua produce un effetto centrifugo di pulizia delle pareti interne della mono spira. L’assenza di circuiti in parallelo garantisce una agevole operazione di “lavaggio” dello scambiatore e l’eliminazione di eventuale aria presente nel circuito dell’impianto. Garanzia Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Caratteristiche tecniche Modello : InoxDens 32S Codice prodotto : 10314.1043.0 Alimentazione : Metano Efficienza energetica Classe di efficienza energetica riscaldamento : A Classe di efficienza energetica sanitario : A Profilo di prelievo : XL Performance Portata termica nominale riscaldamento : 27,5 kW Portata termica nominale sanitario : 32,0 kW Potenza utile massima riscaldamento 60°/80°C : 24,0 kW Potenza utile massima sanitario 60°/80°C : 31,3 kW Potenza utile massima riscaldamento 30°/50°C : 29,9 kW Potenza utile massima sanitario 30°/50°C : 34,8 kW Rendimento nominale 60°/80°C : 98,2% Rendimento nominale 30°/50°C : 108,6% Classe NOx : 6 NOx ponderato : 29 mg/kWh Temperatura minima e massima riscaldamento : 25° ~ 85°C Pressione minima e massima riscaldamento : 0,3 ~ 3 bar Capacità del vaso espansione : 7,0 litri Temperatura minima e massima sanitario : 30° ~ 60°C Portata massima (ΔT=25 K) : 18,4 l/min Portata massima (ΔT=35 K) : 12,9 l/min Portata sanitari specifica (ΔT=30 K) : 15,5 l/min Alimentazione (V,Hz, Ø) : 220~240/50/1 Grado di protezione : IPX5D Dimensioni e peso Dimensioni (AxLxP) 700x400x300 mm Peso : 31,3 Kg Caldaia a condensazione premiscelata Savio InoxDens S InoxDens completa la gamma SAVIO a condensazione premiscelata: perfetta per impianti a radiatori e idonea con sistemi radianti con gruppi di miscelazione. InoxDens è la caldaia a condensazione compatta che assicura alti rendimenti, bassi consumi e rispetto per l’ambiente. Disponibile per riscaldamento e produzione di acqua calda sanitaria, nelle potenze 24, 28 e 32 kW. Scambiatore primario condensante in acciaio INOX con rivestimento in acciaio per offrire la massima resistenza alla corrosione Bruciatore a premiscelazione totale, acciaio INOX (Classe NOx 6) Modulazione 1:5 Metano e anche GPL Scambiatore sanitario a piastre in acciaio INOX Vaso di espansione da 7 litri Pompa ad alta efficienza con basso consumo energetico Integrazione a sistemi solari Savio, mediante kit solare Lettura digitale nel display della pressione Predisposizione per comando remoto e sonda esterna Gruppo idraulico compatto in ottone. Gruppo di mandata con deviatrice motorizzata, by-pass e rubinetto di carico impianto integrati.Circolatore ERP con sblocco pompa manuale su gruppo di ritorno. Funzionalità del pannello comandi Selettore estate/inverno/off Regolatore temperatura riscaldamento Regolatore temperatura sanitario Lettura digitale della pressione Visualizzazione temperatura sanitaria e riscaldamento da display Visualizzazione diagnostica guasti, stato di blocco e storico guasti Il display opera secondo le modalità: Informazioni disponibili sullo stato di funzionamento e storico errori Parametri programmabili per adeguamento generatore/impianto e SET Utente Parametri generatore Parametri Centri Assistenza Autorizzati Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less