Technical features Energy class in heating: A Energy class in sanitary: A Load profile: XL Heating performance: Thermal input (min./max): 3.7/22 kW Useful power (min./max.): 3.95/21.4 kW Useful thermal efficiency: 98.0 % Idle efficiency (60/80°C): 97.5/87.8 % Heating output max/min (80°C-60°C): 21.4/3.4 kW Performance stars (dir. 92/42/EEC): **** Healthcare performance: Thermal input (min./max): 3.7/28.9 kW DHW thermal power (max/min): 24.9/3.5 kW Heating circuit: Expansion vessel pre-charge pressure: 1 bar Maximum heating pressure: 3 bar Expansion vessel capacity: 8 L Min/max heating temperature (high temperature range): 35 / 82 °C Min/max heating temperature (low temperature range): 20 / 45 °C Healthcare Circuit: Min/max domestic hot water temperature: 36 / 90 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 12.1 l/min Instantaneous quantity of hot water ∆T=25°C: 15.5 l/min Instantaneous quantity of hot water ∆T=35°C: 10.4 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Max/min domestic water pressure: 7.0 / 0.2 bar Electrical Data: Protection index IPX5D Class 6 NOx Energy efficiency index of the circulator: EEI ≤ 0.23 Minimum ambient temperature of use: >0°C Total absorbed electric power: 67 W Power supply: LPG (G20/G30) Dimensions: (HxWxD): 745x400x385mm; Weight: 29.7kg Methane, LPG and propane air operation with conversion kit included as standard. General characteristics: Pigma is the new CHAFFOTEAUX boiler, which is part of the Advance Range, resulting in the category leader with a completely renewed design, using the innovative SpinTech exchanger, electronic combustion control, integrated Chaffolink connectivity and Expert Control and external probe as standard, guaranteeing extremely high performance with extremely low fuel consumption. Can be installed in partially protected places. SpinTech features: Exchanger that works with a stainless steel monospiral New single coil primary heat exchanger in stainless steel Passage sections increased by 142% compared to the previous version 1 m more head Seasonal yield at 94% Class A+ thanks to the standard thermoregulation accessories Performance certified by the TÜV RHEINLAND Group. Give Comfort: Modulation ratio 1:7 Optimized internal silencer SRA function Gas transformation with kit included as standard Ready for Chaffolink connectivity Advantages: Installation in partially protected places Smoke outlets 80, 60, 50 mm Intuitive electrical connections Up to 20% energy savings in combination with Expert Control and the SRA function Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : EcoBALKON Plus VMW 266/2-5B Product code : 0010017156 Power supply: methane / LPG Performance Heating power : 5.2 ~ 25.1 kW Sanitary rated power : 5.2 ~ 25.6 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A NOx class : 5 Performance Stars : ★★★★ Domestic hot water production (ΔT = 30K) 12.1 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:5 Expansion vessel capacity: 8 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 850x519x237 mm Weight : 41.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler ecoBALKON plus VMW The most resistant designed to be outdoors ecoBALKON plus is a 26 kW wall-mounted boiler dedicated to outdoor installations, for heating and the production of domestic hot water. Being dedicated to the outside of the building, the boiler is equipped as standard with protection against frost down to -15°C. From the display of the specific remote control, the user is able to carry out the operations of control, regulation and signaling of any anomalies, remaining comfortably inside the house. ecoBALKON plus is not only the smart answer for modern installations, but a concentration of performance, savings and technology that does not require any space inside the home. Thermoregulation with remote control Combined with the multiMATIC 700 control unit, it allows you to refine the thermoregulation to further reduce management costs The outdoor solution in the combined version ecoBALKON plus is the most resistant boiler designed for outdoor installation, guaranteeing excellent performance down to -15°C. The range is divided into two combined natural gas and heating only models with the possibility of switching to a propane or propane air supply using a kit already supplied as standard. ecoBALKON is the Vaillant proposal for residential construction, which provides for limited spaces inside homes, to always ensure maximum comfort thanks to the pre-heating system and the NTC probes that monitor and inhibit sudden changes in temperature. Equipped with a new modulating pump, it allows for considerable electricity savings, while the new stainless steel heat exchanger with a wide 1:5 modulation range guarantees gas savings. Furthermore, combined with the multiMATIC 700 control unit, it allows you to refine the thermoregulation to further reduce management costs. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoBALKON plus Space-saving comfort that frees up the home Frost protection up to -15°C and IPX5D High DHW comfort thanks to settable pre-heating Steel exchanger and 8 liter expansion tank Simplicity in replacing standard balcony boilers thanks to a complete range of accessories Thermoregulation with standard remote control inside the house Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CHAFFOTEAUX MIRA ADVANCE 25 kW GAS BOILER LINK Wi-Fi INCLUDING METHANE WITH FUME EXHAUST KIT Product code: 3310612 Energy label specifications according to the European ErP directive Heating energy efficiency Class A+ Sanitary energy efficiency Class A Withdrawal profile: XL Energy performance Nominal heat input in heating max/min (Hi) Qn: 22/2.5 kW Nominal DHW heat input max/min (Hi) Qn: 26/2.5 kW Heating output max/min (80°C-60°C) Pn: 21.5/2.3 kW Heating output max/min (50°C-30°C) Pn: 23.6/2,6 kW DHW max/min useful power Pn: 24.9/2.4 kW Efficiency at nominal heat input (60/80°C) Hi/Hs: 97.7/87.9% Efficiency at 30% of Qn with return to 30°C Hi/H: 109.8/98.9% Performance stars (dir. 92/42/EEC): **** Working burner chimney losses: 2.6% Emissions Evacuation residual head: 100 Pa NOx class. 6 Smoke temperature (G20) (80°C-60°C): 70 °C Maximum flue gas flow rate (G20) (80°C-60°C): 44.9 kg/h Excess air (80°C-60°C): 34% Heating/DHW circuit Expansion vessel capacity 8 l Maximum heating pressure: 3 bar Min/max heating temperature (high temperature range): 35 / 82 °C Min/max heating temperature (low temperature range): 20 / 45 °C Min/max domestic hot water temperature: 36 / 60 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C): 14.3 l/min Instantaneous quantity of hot water ∆T=25°C - ∆T=35°C: 19.8 - 12.3 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Electrical data Supply voltage/frequency: V/Hz 230/50 Total absorbed electric power: 80 W Energy efficiency index of the circulator: EEI ≤ 0.23 IP X5D degree of protection Dimensions HxWxD: 745 x 400 x 315mm Weight: 29.7Kg Diet Methane gas MIRA ADVANCE LINK Mira Advance Link, powerful core for amazing control. Equipped with the innovative SpinTech exchanger, it excels in its category thanks to the electronic combustion control, integrated Chaffolink connectivity, Expert Control and standard external probe. Can be installed in partially protected places Maximum Performance: New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. Maximum Comfort Modulation ratio 1:10. Electronic combustion control E-Burning System. SRA function. Gas transformation from the technical menu without the need for a kit. Chaffolink connectivity integrated in the boiler. External temperature from the internet thanks to integrated connectivity. Ease of Installation Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. Energy saving and respect for the environment Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO InoxDens Moon 35 SA Condensing Boiler Complete With Low NOx Methane or LPG Fume Exhaust Kit - NEW Technical data Heating/DHW nominal heat input kW 31.0 / 34.7 Heating/DHW minimum heat input kW 3.8 / 3.8 Heating/DHW maximum useful power 60°/80°C * kW 30.6 / 34.1 Heating/DHW minimum useful power 60°/80°C * kW3 ,6 / 3,6 Heating/DHW maximum useful power 30°/50°C ** kW 28.3 / 33.7 Heating/DHW minimum useful power 30°/50°C ** kW 4.0 / 4.0 Condensate pH Ph 4.0 Yield name 60°/80°C * % 98.8 Yield min. 60°/80°C * % 94.5 NOx class 6 Minimum/maximum heating temperature **** °C 25 / 80 Minimum/maximum heating pressure bar 0.3 / 3 Expansion tank capacity (total/useful) l 7 DHW minimum/maximum temperature °C 35 / 55 Minimum/maximum DHW pressure bar 0.3 / 10 Maximum flow rate (ΔT=25 K) / (ΔT=35 K) l/min 20.5 / 14.3 Specific sanitary flow rate (ΔT=30 K) ***** l/min 17.0 Voltage/Power at nominal heat input V~/ W 230 / 116 Power at minimum heat input W 55 Power at rest (stand-by) W 3 Degree of protection IPX5D Height x Width x Depth mm 700 x 400 x 300 Weight kg 36 Boiler water content 2.5 l Code 10314.1031.0 Inoxdens Moon The InoxDens Moon condensing boiler , unlike traditional boilers, allows you to recover energy by condensing the water vapor contained in the exhaust fumes; that is, for the same amount of heat produced, it consumes less gas and furthermore the exhaust fumes contain fewer substances which are harmful to the environment. The materials that compose it and the regulation systems with which it is equipped offer safety, high comfort and energy savings, so as to be able to fully appreciate the advantages of autonomous heating. InoxDens Moon is the new SAVIO model of wall-mounted condensing boiler . It offers excellent performance and high yields that last over time, thanks to the innovative heat exchanger . Simple to use thanks to the digital control panel, with a display designed to communicate with the user easily and comfortably. Comfort is at your fingertips Thanks to the Savio Connect App it is possible to manage the boiler remotely. To use it, you need the optional Savio Connect KIT in addition to the advanced remote control. The advanced control (class V) makes it possible to modulate the system water delivery temperature according to the room temperature and the external temperature. What are the benefits? Reduction of consumption, energy saving and extreme flexibility: the regulation is flexible according to your needs and daily habits. The domestic hot water temperature can also be adjusted with a click Awareness of your system: you can always monitor the correct functioning of the heat generator in real time Safety: Possible anomalies can be seen in real time, together with the relative error code. In this way it will be possible to intervene immediately and when possible even remotely "SAVIO Connect" kit It is a WiFi "connection device" which, operating in the home WLAN network, allows control of room thermoregulation and boiler operation, both locally and remotely, using our dedicated APP. Technical features Boiler with single circuit primary exchanger in stainless steel, without joints and/or welds, which maintains high efficiency even on older systems New combustion system with patented gas-adaptive technology (Advanced Adaptive Gas Combustion Control – A²GC²) The electronics continuously analyze the combustion (CO2) through the flame signal and intervene by acting on the gas valve and fan, to allow correct combustion in all terms of use. The electronics allow the boiler to be easily adapted to the various types of gas without having to intervene with a mechanical transformation kit Instant production of domestic hot water with dedicated plate exchanger Domestic hot water pre-heating function: faster delivery of domestic hot water User interface with display and multifunction keys for adjusting and setting the parameters Easy to inspect standard by-pass Chimney Protection System: electronic management of fume overheating, guaranteeing maximum protection of the chimney Ducting on flues: particularly suitable for operation in flues that require ducting with high pressure drops Minimum polluting emissions (class VI - EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection (methane configuration) Removable casing in three pieces for easier maintenance or inspection For SV versions: possibility of setting the maximum power that can be supplied to the external boiler Gas-adaptive technology Less consumption, more efficiency, fewer emissions The innovative Adaptive Gas technology, which all models in the InoxDens line are equipped with, allows the boilers to be adapted in complete autonomy to the different types and qualities of gas. The electrode, in addition to detecting the flame, also detects the characteristics of the gas and automatically adapts the combustion parameters to maintain the maximum level of efficiency, with a consequent reduction in consumption and emissions compared to traditional control systems. The Adaptive gas system makes the boiler ready to operate with any type of gas without transformations. Automatic gas regulation Adaptation to changing gas quality Clean combustion The only model suitable for methane and LPG which allows you to optimize the warehouse In traditional boilers, the combustion values ​​are detected and adjusted only during maintenance, furthermore the composition of the gas network is not always constant and can create operating inefficiencies on boilers without combustion control devices, compromising reliability, savings and the quality of emissions. Thanks to the Gas-Adaptive system, the new condensing boilers electronically control combustion by managing the gas and air supply at best and at all times, automatically adapting the CO2. A "Plastic-FREE" production For a more sustainable environment A fundamental element that guided the entire design phase of the new InoxDens Moon boiler is the strong focus on the circular economy. For this we have used components with a higher rate of recyclability, eliminating the use of plastic as much as possible. The plastic group, for example, has been replaced with the brass group, a completely recyclable material. The protective shells of the boiler were made of cardboard and no longer of polystyrene. Furthermore, the front is no longer in plastic but in pressed steel. High circulation single coil primary heat exchanger Savio introduces the Round heat exchanger in 2017. Demonstrated the great reliability it adopts in the InoxDens Moon range. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Chaffoteaux PIGMA ADVANCE EXT 25 condensing boiler complete with methane or LPG fume exhaust kit cod. 3310577 - NEW Reference 3310577 Energy class in heating A + Energy class in sanitary A XL withdrawal profile Characteristics Nominal heat input in heating max/min (Hi) Qn 22.0 / 3.7 kW Nominal heat input in heating max/min (Hs) Qn 24.4 / 4.1 kW Nominal DHW heat input max/min (Hi) Qn 26.0 / 3.7 kW Max/min DHW nominal heat input (Hs) Qn 28.9 / 4.1 kW DHW max/min useful power Pn 24.9 / 3.5 kW Performance stars (dir. 92/42/EEC) **** DHW max/min useful power Pn 24.9 / 3.5 kW Performance stars (dir. 92/42/EEC) **** Instantaneous quantity of hot water ∆T=25°C 15.5 l/min Expansion tank capacity 8l Dimensions Dimensions (Height x Width x Depth) 766 x 505 x 240 mm PIGMA ADVANCE EXT Pigma Advance Ext is the efficient and high-performance solution for outdoors. Equipped with the innovative SpinTech exchanger and ready for connectivity, it is perfect for customers who want accessible comfort. MAXIMUM PERFORMANCE New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ thanks to the standard thermoregulation accessories. Performance certified by the TÜV RHEINLAND Group. MAXIMUM COMFORT Modulation ratio 1:7. Optimized internal silencer. SRA function. Gas transformation with kit included as standard. Ready for Chaffolink connectivity. EASY INSTALLATION Minimum operating temperature down to -20°C (-20*C via optional kit code 3318954). Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 20% energy savings in combination with Expert Control and the SRA function. Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Biasi RinNOVA COND 24S condensing boiler Low NOx class A Complete with methane flue gas exhaust kit Technical data Heating/DHW nominal heat input kW 21.0 / 25.0 Heating/DHW minimum heat input kW 5.1 Heating/DHW maximum useful power 60°/80°C * kW 20.6 / 24.6 Heating/DHW minimum useful power 60°/80°C * kW 4.8 Heating/DHW maximum useful power 30°/50°C ** kW 22.6 / 26.9 Heating/DHW minimum useful power 30°/50°C ** kW 5.3 Quantity of condensate at Q.nom. 30°/50°C (in heating) ** l/h 4 Amount of condensate at Q.min. 30°/50°C (in heating) ** l/h 0.8 Condensate pH 4.0 Yield name 60°/80°C * % 98.2 Yield min. 60°/80°C * % 94.1 Yield name 30°/50°C ** 107.5 Yield min. 30°/50°C ** % 104.9 NOx class 6 Minimum/maximum heating temperature ****°C 25 / 85 Minimum/maximum heating pressure bar 0.3 / 3.0 Expansion tank capacity l 7 Degree of protection IPX5D Height x Width x Depth mm700 x 400 x 300 RinNova Cond completes the BIASI range with premixed condensing: perfect for radiator systems and suitable for radiant systems with mixing groups. RinNova Cond is the compact condensing boiler that ensures high efficiency, low consumption and respect for the environment. Available for heating and domestic hot water production, in power ratings of 24, 28 and 32 kW. RinNova Cond is in class A, therefore it benefits from the tax deduction according to current legislation. Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, stainless steel (Nox Class 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 7 liter expansion tank High efficiency pump with low energy consumption Integration with BIASI solar systems, using a solar kit Digital readout in the pressure display Arrangement for remote control and external probe Compact hydraulic group in brass. Delivery group with motorized diverter, integrated by-pass and system filling cock. ERP circulator with manual pump release on the return group. Remote commands The RinNova Cond range has the choice of 2 class V remote controls (they allow for a 65% deduction), in the Base and Top versions with weekly chronothermostat functions with up to 4 programmable periods with independent temperatures, as well as remote control of all the information on the boiler display. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CAUTION Methane, LPG and propane air operation without the need for a kit. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu. For info, contact the local authorized assistance center in advance ARISTON GENUS ONE NET CONDENSING BOILER IN 25 METHANE OR LPG FOR BUILT-IN COMPLETE WITH FUME KIT - NEW ERP Article number: 3301226 Characteristics of heating/DHW operation: Max/min nominal heat input (heating) PCI: 22-2.5 kW Nominal heat input max/min (sanitary) PCI: 26-2.5 kW Max/min useful heat output (heating): 21.5-2.3 kW Efficiency at nominal heat input (60/80°C) PCI: 97.7% Efficiency at nominal heat input (30/50°C) PCI: 106.7% Efficiency at 30% (30°C) PCI: 109.7% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C DHW max/min temperature: 60-36°C Quantity of hot water (deltaT 25°C): 15.4 l/min Quantity of hot water (deltaT 35°C): 11 l/min Specific flow rate (first 10' with deltaT 30°C): 12.8 l/min minimum operating temperature (-20°C with antifreeze kit) -15°C Power supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 84,7W Degree of protection of the electrical system IP X5D Dimensions mm (HxWxD) 1140 x 590 x 240 Installation: Recessed Power supply: methane Functionality: XtraTech stainless steel Standard connectivity: with the Sensys NET thermostat Thermoregulation included: Sensys NET system manager + external probe Functions: AUTO, Comfort, CARE Operation CNG, LPG and propane air without the need for kits. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu New XTRATECH heat exchanger: XtraTech is the new Ariston exclusive stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time. Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort : Innovative functions to satisfy your need ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. Genus ONE NET IN Top of the range built-in wall mounted condensing boiler XtraTech heat exchanger in exclusive Ariston stainless steel, with high head Exchanger passage sections +142% compared to the previous version Ignition system, electronic combustion control Gas transformation from the technical menu Modulation ratio 1:10 Integrated Ariston Net connectivity as standard BusBridgeNet® communication protocol AUTO and Comfort function Class A+ in heating thanks to the Sensys NET system manager and standard external probe Minimum operating temperature down to -20°C* Semi automatic filling Built-in unit in electro-galvanized sheet (to be ordered with separate code) Smoke outlet 80, 60, 50 mm HIGH EFFICIENCY Product characterized by high energy performance, reduction of consumption and polluting emissions. MODULATION RATIO Automatic regulation of the power according to the heating request MODULATING CIRCULATOR Modulating circulator for optimizing consumption and maximizing performance SYSTEM MANAGEMENT New communication protocol set up to ensure complete system management. MADE IN ITALY Made entirely in Italy AUTO FUNCTION Maximum comfort, efficiency and energy savings based on the automatic analysis of the environmental conditions, connected external devices and required performance. OUTDOOR I NSTALLATION Possibility of outdoor installation thanks to all the weather protection devices. COMFORT FUNCTION It speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last tap). EXTRA SMALL SIZE Very small footprint to adapt to any space problem. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

nb: LPG TRANSFORMATION SELECTABLE WITH ELECTRONIC PARAMETER Beretta EXCLUSIVE X 25 C low NOx condensing boiler complete with flue exhaust kit 20187794 LPG Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL Characteristics of heating/DHW operation: Heating thermal capacity (max-min) kW 20 - 3.6 Nominal DHW heat input (max-min) kW 25 - 3.6 NOx class 6 IP X5D degree of protection Supply voltage V-Hz 230 - 50 Max pressure-temperature bar-°C 3 - 90 Max pressure bar 8 Boiler dimensions (HxPxL) mm 740x275x420 EXCLUSIVE X EXCLUSIVE X, with 5 models (3 of which combined and 2 'heating only'), from 25 to 35 kW of power, is able to best satisfy the multiple installation needs: from new buildings to redevelopment, from single installation to application hybrid in multi-energy system. Thanks to the ACC Combustion system, each model self-adapts to different types of gas, without the need for "dedicated" codes for methane, LPG and propane air(*), or gas conversion kits EXCLUSIVE X , TECHNOLOGY FOR A GREEN LIFESTYLE From the R&D laboratories of Beretta comes EXCLUSIVE X, the new condensing boiler that marks a further step in the evolution of the EXCLUSIVE range, whose name has always characterized the top of the brand's wall-mounted offer. Combustion and electronics, which represent the heart and brain of the boiler, have been entirely redesigned to offer an even more performing and responsive product to the European objectives of environmental sustainability. EXCLUSIVE X is the ideal choice for those who are not satisfied and are looking for green solutions. EX CLUSIVE INNOVATION The new stainless steel exchanger, the innovative electronics with hybrid function integrated in the boiler, without external remote controls, and the ability to process mixtures of natural gas and hydrogen up to 20% give EXCLUSIVE X a highly technological profile, ensuring maximum energy saving, which translates into an economic advantage for the user . EXCLUSIVE PERFORMANCE EXCLUSIVE X represents the spearhead of the Beretta offer. Thanks to the new optimized plate heat exchanger , the range achieves sanitary performance at the top of the category in terms of efficiency, temperature stability and waiting times. The refined ACC electronic combustion system, which allows the quantity of fuel delivered to be continuously modulated, offers “best-in-class” efficiency and functionality in all circumstances, reducing harmful emissions to a minimum. EXCLUSIVE BERETTA The new range represents the synthesis of Beretta's advanced research, in continuity of style with the best tradition of the brand. Continuity that manifests itself both in the aesthetics of the product, which takes up the lines of the first Beretta boiler models, reinterpreting them in a modern key, and in the simplicity of use and installation flexibility, among the distinctive features of the brand, which have always been appreciated by the market A NEW HEART OF STEEL EXCLUSIVE X is equipped with a new primary exchanger in stainless steel , with a smooth tube with a large section, to ensure the best efficiency and cleanliness over time. Stainless steel, in addition to the high resistance to the corrosive action of acid condensate, prevents the internal formation of oxides and other electrochemical phenomena typical in installation on old systems. The geometry with a single wound coil (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents phenomena of clogging. Front access facilitates periodic maintenance and cleaning of the combustion chamber. COMBUSTION WITH ELECTRONIC INJECTION The ACC system, refined by Beretta for the EXCLUSIVE X , allows in all circumstances to offer functionality, efficiency and low emissions that are “first in class”. Using a sensor for detecting the flame ionization current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values ​​over the whole modulation range of the delivered power (constant CO2 value). Thanks to the sophisticated ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

Energy label specifications according to European ErP directive Heating energy efficiency Class A Energy efficiency of sanitary equipment XL profile Class A Heating/sanitary operation features: Nominal heat output: 25 kW Nominal thermal power: 24.38 kW Classification European Directive EEC 92/42: **** Efficiency at rated power: 99.7% Efficiency at reduced load (30%): 109.4% Total electrical power: 88 W Amount of hot water at Δt=25°C: 14.3 l/min Dimensions (hxwxd) 890x553x275 mm; 44kg Antifreeze up to -15°C as standard Built-in antifreeze system (SAI) as standard METHANE Powered Legend: HE (Hi Efficiency) C (heating + hot water) S (Sealed Chamber) I (electronic ignition, ionization control) AG (antifreeze (-15°C). Green E (Hi Efficiency) Weather Beretta boilers offer reliability and excellent technology, so they can be used in solar thermal systems and in systems with the latest and most innovative technologies. Beretta presents Meteo Green e , the new range of outdoor and built-in condensing boilers designed to offer high energy efficiency. The boiler is in fact equipped with a wide modulation range (1:10), range rated approval, low consumption circulator (class A) with variable speed and all the advantages of the Meteo range.   Condensing exchanger : Designed to provide high performance in compliance with the most stringent European directives in terms of energy efficiency and low emissions. The innovative condensing exchanger and the production process have allowed Beretta to file a European Patent application (Patent Pending). The exchanger is made of a single aluminum tube with no welding. The high thermal conductivity of aluminum allows for a more uniform temperature distribution so as not to create overheating points, benefiting a longer lifespan of the exchanger. Furthermore, aluminium offers high resistance to corrosion. The single-tube architecture (series circuit) allows for a large section for the passage of water in the exchanger with the advantage of having low pressure drops and preventing both the deposit of limescale and impurities The innovative aluminum condensing exchanger allows to recover a good part of the heat of the fumes, reducing the losses in the chimney, and a good part of the latent heat of condensation of the water vapor present in the fumes, reaching a four-star energy efficiency value (according to European Directive EEC 92/42). The exchanger is made of a single aluminum tube and without welding.   Modulation 1:10 The range offers a wide modulation range to meet real energy needs, while simultaneously offering a high reduction consumption. Beretta creates this system through a totally pneumatic model and therefore safe and reliable. The electronics only act on the number of revolutions of the fan (inlet air flow) without intervening on the injection of the quantity of gas that is automatically aspirated. Beretta therefore introduces a new double-division mixer: a mechanical shutter with calibrated weight that opens or closes a part of the venturi section in order to divide the modulation range into two stages (smaller section with low air flow or larger section with high air flow). Beretta has also developed a specific silencer in the air intake to reduce any resonances generated by the new mixer.  Low consumption modulating circulator (Class A) It reduces electrical consumption by up to 60%, thanks also to self-adaptation in proportion to the power supplied or to constant ΔT operation. Thanks to the new technology adopted, the electric motor of the circulator offers an Energy Efficiency Index EEI<0.23, which means significantly reduced electrical consumption and already aligned with energy saving requirements. The new low consumption modulating circulator (class A) offers technologically advanced control and allows a high reduction in consumption thanks also to modulation in a wide range of flow rates. Comfort Technological innovation combined with advanced electronics allow us to obtain the “Three stars” in health comfort: the maximum foreseen by Pr EN 13203. Intelligent Management Meteo Green he is equipped with the Easy Climate function (thermoregulation with external probe as standard) and a Remote Control Panel (REC07) with the Easy Filling function (system loading activated by remote control), (csi model only).  Characteristics: Modulation 1:10 Low consumption modulating circulator (Class A): self-adaptation in proportion to the power supplied or operation at constant DELTA T, (EEI<0.23) RANGE RATED certification which allows the thermal output of the boiler to be adjusted to the actual needs of the system 4 STAR efficiency according to European Directive EEC 92/42 Efficiency at 100% Pn > 93+2 log Pn according to DL 311/06 Low polluting emissions: class 5 according to UNI EN 483 Patented (Patent Pending) high flow rate aluminum condensing exchanger 3 STAR health comfort: the maximum foreseen by Pr EN 13203 Thermoregulation with external probe as standard REC 07 remote control panel as standard Frost protection up to -15°C as standard (mod. AG) Electrical protection degree IPX5D For gas conversion, contact the Assistance Centres Authorized Beretta Technique   Beretta is “ERP”. The concrete commitment towards an eco-sustainable future   The acronym ErP, which stands for “Energy related Products” , identifies Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark a turning point for heating and domestic hot water production products. On that date, other regulations issued at the same time for the energy labelling of products will also become applicable, in addition to the corresponding Directive 2010/30/EU.  The regulation provides that all products intended for heating and the production of sanitary water with a nominal thermal power lower than or equal to 70 kW may be placed on the market only with an energy label that highlights their efficiency class . Different energy efficiency labels have been provided for different types of appliance/technologies, but they all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility of easily identifying the efficiency level of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climate bands.   In addition to product labels, the European regulation has provided for the creation of a system label in the case of systems with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching efficiency levels even higher than those of individual appliances. Also starting from the same date, for products intended for heating and combined, new seasonal efficiency limits will come into force. These for products with a nominal thermal power equal to or less than 400kW, will prevent the placing on the market of less efficient products. Also for ACS tanks, the obligation to comply with minimum limits of thermal dispersion will come into force. For primary water tanks, these will be subject to compliance with an energy classification based on thermal dispersion. For sanitary storage tanks, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters they will be bound to comply with the energy classification. For heating heat pumps and mixed appliances, in addition to seasonal efficiency limits, specific noise emission limits will be provided for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labeling, will have to comply with a series of requirements in terms of efficiency.   Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferroli condensing boiler Bluehelix HiTech RRT 24 C complete with low NOx methane or LPG fume exhaust kit - New Heating ERP Class A Healthcare ERP Class A XL load profile Heating capacity max / min kW 20.4 / 3.5 Max DHW heat input (Hi) kW 25.0 Max / min DHW thermal power kW 24.5 / 3.4 Yield 30% % 109.7 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 8 litres Sanitary flow rate ?t 25°C l/min 14 Protection degree (IEC 60529) IP X4D Dimensions HxWxD mm 700x420x320 Bluehelix HiTech RRT   The new user interface with «capsense» technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply. Thanks to the energy efficiency of the space heating ηs 94% among the highest in the category (Class A ErP, scale from G to A++) and to the combination with the Connect remote control, able to read the external temperature directly from the internet, reaches the system energy class A+ (scale from G to A+++). Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Thanks to the "Hydrogen plug-in" system, one of its most important innovations, it is already able to self-regulate to work with mixtures of natural gas and hydrogen, which will soon arrive in Europe, to combat global warming. Designed to fully satisfy the requests for a "robust" product from every point of view thanks to the high-passage primary exchanger capable of guaranteeing maximum efficiency and reliability over time also, and not only, as a replacement for old generators in particularly dirty systems . Silence at the top The particularly careful design of BLUEHELIX HITECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. It will be difficult to realize whether the boiler is on or off from its noise, as on older generations of boilers, because even the on/off transients have been optimized according to acoustic comfort. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections Characteristics Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Class 6 NOx: already in line with the provisions of the ErP regulation from 26.09.2018 (NOx emissions < 56mg/kWh) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Methane LPG Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door (without insulators): simplifies maintenance and reduces its cost thanks to fewer perishable parts Instantaneous production of DHW with dedicated DHW plate heat exchanger (only for version C) Hydraulic connections covered by the boiler shell Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems ECO function in DHW for greater savings in the period of low use of hot water (only for version C) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only for methane operation) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit Boiler control The new user interface with ''capsense'' technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply, customizing the operation of the appliance in so as to manage the environmental comfort according to one's needs. Thanks to the remote connection via bus, this can also be done directly from the CONNECT remote control, even via smartphone. The boiler is also set up to connect a second room thermostat to dedicated terminals to manage multi-zone systems. TOP EFFICIENCY Even on old systems (replacements) The BLUEHELIX HITECH RRT heat exchanger THERMOBALANCE™ (fig. A) compared to the more classic and widespread steel exchanger (fig. B) also used in the past by the Ferroli Group exclusively on a small series of boilers produced for the market English, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values MC2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger group. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE OPERATION OF THE METHANE OR LPG BOILER IS USED THROUGH THE STANDARD KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE nb: optional body, to be selected in related products Ariston condensing boiler CARES PREMIUM IN 25 built-in methane or LPG complete with flue kit cod. 3301231 Product code: 3301231 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Nominal heat input max/min (heating) PCI: 23.5/5.5kW Nominal heat input max/min (sanitary) PCI: 23.5/5.5 kW Max/min useful heat output (heating): 22.9/5.3 kW Efficiency at nominal heat input (60/80°C) PCI: 97.5% Efficiency at nominal heat input (30/50°C) PCI: 103.9% Efficiency at 30% (30°C) PCI: 108.2% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C DHW max/min temperature: 60-36°C Quantity of hot water (deltaT 25°C): 12.6 l/min Quantity of hot water (deltaT 35°C): 9.0 l/min Specific flow rate (first 10' with deltaT 30°C): 10.5 l/min minimum operating temperature (with antifreeze kit) -15°C Power supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 80W Degree of protection of the electrical system IP X5D Dimensions mm (HxWxD) 1140 x 590 x 240 Installation: Recessed Power supply: methane Functionality: Thermoregulation included: Sensys system manager + external probe CARES PREMIUM IN Aluminum-silicon condensing exchanger Modulation ratio 1:4 BusBridgeNet® communication protocol Sensys system manager and standard external probe Minimum operating temperature down to -20°C* Electro-galvanized coat for outdoors Smoke outlet 80, 60 mm MET/LPG operation with standard kit (model 25) Comfort function Speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last draw). Auto function Maximum comfort, efficiency and energy savings based on automatic analysis of the environmental conditions, connected external devices and required performance. System management New communication protocol designed to ensure complete system management. High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions. Extra small size Extremely small footprint to adapt to any space problem. Made in Italy Made entirely in Italy. Modulating circulation Modulating circulator for optimizing consumption and maximizing performance. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE OPERATION OF THE METHANE OR LPG BOILER IS USED THROUGH THE STANDARD KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ariston condensing boiler CARES PREMIUM EXT 25 for outdoor methane or LPG complete with flue exhaust kit cod. 3301229 Product code: 3301229 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/sanitary features: Nominal heat input max/min (heating) PCI: 23.5/5.5kW Nominal heat input max/min (sanitary) PCI: 23.5/5.5 kW Max/min useful heat output (heating): 22.9/5.3 kW Efficiency at nominal heat input (60/80°C) PCI: 97.5% Efficiency at nominal heat input (30/50°C) PCI: 103.9% Efficiency at 30% (30°C) PCI: 108.3% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C DHW max/min temperature: 60-36°C Quantity of hot water (deltaT 25°C): 12.6 l/min Quantity of hot water (deltaT 35°C): 9.0 l/min Specific flow rate (first 10' with deltaT 30°C): 10.5 l/min minimum operating temperature (with antifreeze kit) -15°C Power supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 80W Degree of protection of the electrical system IP X5D Dimensions mm (HxWxD) 770 x 505 x 240 External installation Power supply: methane Functionality: Thermoregulation included: Sensys system manager + external probe CARES PREMIUM EXT Aluminum-silicon condensing exchanger Modulation ratio 1:4 BusBridgeNet® communication protocol Sensys system manager and standard external probe Minimum operating temperature down to -20°C* Electro-galvanized coat for outdoors Smoke outlet 80, 60 mm MET/LPG operation with standard kit (model 25) Comfort function Speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last draw). Auto function Maximum comfort, efficiency and energy savings based on the automatic analysis of the environmental conditions, connected external devices and required performance. Easy Installation Small footprint for easy installation. System management New communication protocol designed to ensure complete system management. High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions. Extra small size Extremely small footprint to adapt to any space problem. Made in Italy Made entirely in Italy. Modulating circulation Modulating circulator for optimizing consumption and maximizing performance. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less