THE PRODUCT IS AVAILABLE ON ORDER Technical features Model : Victrix Tera 24 Plus Product code : 3.027373 Maximum nominal heat input in DHW: 28.8 kW Maximum nominal heat input in heating mode: 24.6 kW Minimum nominal heat input: 4.5 kW Maximum useful thermal power in DHW: 28.3 kW Maximum useful thermal power in heating: 24.1 kW Minimum useful thermal power: 4.3 kW Useful thermal efficiency at 100% Pn (80 / 60 °C): 97.8% Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) : 102.3% Useful thermal efficiency at 100% Pn (40 / 30 °C) : 106% Useful thermal efficiency at 30% of the nominal load. (40 / 30 °C) : 108.2% Minimum gas flow rate to the burner: 0.48 m 3 /h Maximum gas flow rate to the burner: 3.05 m 3 /h Weighted CO : 20 mg/kWh Weighted NO X : 35 mg/kWh Power supply: methane NO x class : 6 Minimum suction/exhaust head available: 2 Pa Maximum suction/exhaust available head: 240 Pa Nominal heating expansion vessel capacity: 8 litres Electrical protection degree : IPX5D Dimensions and weight Dimensions (HxWxD): 748x440x256 mm Empty weight: 33.8 kg Immergas Victrix Tera Plus Mural compact and instant built-in and for heating only VICTRIX TERA 24 PLUS can be used as a boiler for room heating only or connected via an optional kit to a boiler unit for the production of domestic hot water Ideal for multiple withdrawals of domestic hot water For large domestic hot water needs or for multiple simultaneous withdrawals, the combination with the separate storage tank unit is possible with models from 80 to 2000 liters Combinations with solar thermal systems Storage tank units with a capacity of 120 liters or higher are designed for the combination of forced circulation thermal solar systems, including the UB INOX SOLAR 200 V2 version equipped with an integrated solar circuit. The VICTRIX TERA 24 PLUS boiler can be connected to the entire range of Immergas Solar Solutions Simplicity of commands The controls are simple, the LCD display is clear, and the selection buttons for adjustments and settings work quickly. Condensing module with stainless steel coil Low consumption in Stand-By, less than 6 W Class A circulator The low-consumption circulator allows considerable savings in electricity compared to a traditional circulator and adjusts its performance based on the variations in the hydraulic flow rate of the system, for example in the presence of thermostatic valves or zone valves Indoor/outdoor and recessed installation The range is approved for operation outside the home with top cover kit for installation in partially protected places (3.027263). An electric resistance kit is available to increase the antifreeze protection from -5 °C to -15 °C (3.017324) Recessed installation The built-in installation in the OMNI CONTAINER (3.016991) allows the boiler to be positioned outside in a niche and thus recover living space. To insert the boiler inside the OMNI CONTAINER it is necessary to use the optional support bracket (3.027129) Remote adjustment The boiler can be connected to the CAR V2 , the modulating chronothermostat which allows you to control the boiler comfortably from inside the home . The SMARTECH PLUS wireless chronothermostat with Bluetooth technology is also available: it allows you to adjust the heating temperature even with a smartphone via a dedicated app Solutions for compact hybrid systems The VICTRIX TERA range can be installed in TRIO V2/TRIO MONO V2 systems. Prepared for the combination of the condensing boiler with the AUDAX heat pumps and the use of solar thermal, they allow to increase the energy performance of the building and to exploit renewable energies by reducing harmful emissions . The TRIO V2 compact hybrid systems are ideal for small apartments but also single-family houses . They can be installed flush-mounted or in specific technical cabinets and allow for the reduction of installation space for plant engineering Installation flexibility with trio In applications with TRIO V2/TRIO MONO V2, the models of the VICTRIX TERA range can be installed in the SOLAR CONTAINER or in the DOMUS CONTAINER. The boiler support bracket is inserted as standard with the accessory kit for combination with AUDAX and instantaneous boiler and with the accessory kit for combination with AUDAX and PLUS boiler. Formula Comfort 10 It benefits from the most comprehensive maintenance program lasting 10 years with no activation costs , with the possibility of extending it up to 15 years . In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ariston condensing boiler Genus One+ Net 24 kW Low NOx Methane or LPG with complimentary Sensys HD flue gas kit STANDARD - NEW Energy class A++* Energy class in sanitary A XL withdrawal profile COMBUSTION Nominal heat input in heating max/min PCI kW 22.0 / 2.6 Nominal heat input in DHW max/min PCI kW 26.0 / 2.6 Heating thermal power max/min (80°C-60°C) PCI kW 21,5 / 2,5 Efficiency at 30% at 30°C PCI % 109.5 HEATING CIRCUIT Maximum heating pressure 3 bar Expansion vessel capacity l 8 Heating temperature min/max °C 20 / 82 SANITARY CIRCUIT Min/max DHW temperature °C 36 / 60 Instantaneous amount of hot water ?T=25°C l/min 15.4 ELECTRICAL DATA Supply voltage/frequency V/Hz 230/50 Degree of protection of the electrical system IP X5D Dimensions HxDxL mm 745x315x400; 32kg *Achievable with standard thermoregulation accessory and web reference for external temperature Genus One+ Net Ariston excellence guaranteed for 10 years thanks to the smart protection assistance programme. Latest generation condensing boiler integrated wifi and voice control , hydrogen compatible up to 20%. Voice control With genus ONE+ NET your voice is enough to manage the comfort of your home, thanks to the integration of the ariston net google home amazon alexa app Ariston NET With ariston NET you have comfort at your fingertips. Remote control, consumption reports and online technical support, all in one free smartphone app Top of the range condensing boiler, with integrated connectivity and compatible with 20% hydrogen blends Patented XtraTech™ high head stainless steel heat exchanger Modulation ratio 1:10 Low NOx levels (24 mg/kWh) Silent operation (only 46 db(A)Mod. 24kW) Compatibility with natural gas, LPG and propane air without the use of kits Ignition Control System+, stable and safe performance Hydro Sensor System, constant monitoring of system pressure Flow Control System+, optimal balance of flow and comfort Integrated Wi-Fi and ARISTON NET connectivity as standard Tempered and scratch resistant glass panel Large LCD display with touch interface Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS MADE TO ORDER NB The boiler will be supplied with methane. For operation with LPG or propane air, contact the local authorized assistance center in advance. Technical features Model : LUNA STYLE 24 Code: A7754007 Heating nominal heat input: 20.6 kW DHW nominal heat input: 24.7 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: A Sanitary Energy Efficiency Class: A Withdrawal profile: XL Seasonal space heating energy efficiency ŋs: 94/98 % Water heating energy efficiency ŋwh: 88.0 % Useful efficiency at 30% thermal power. name and low temperature regime. **ŋ1: 99.4 Useful efficiency (pci) at 30% - return temperature 30°C: 110.3% Useful efficiency (pci) intermediate - medium temperature 70°C: 98.5% Dimensions and weight Dimensions (hxwxd): 763x450x334 mm Net weight: 31.5kg Description 98% energy efficiency thanks to the advanced technology applied Backlit color control panel, icons for parameter display, clear descriptions via large text display, adjustment knob and menu selection keys Wide modulation range 1:10 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Power set: heating power adjustment according to project data Hydraulic group in brass Connection to pressurized collective flues Natural gas boilers convertible to LPG and propane air (conversion kit not required) Antifreeze function and IPX5D degree of protection Operation with a mixture composed of up to 20% hydrogen Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Victrix Tera 28 V2 Product code : 3.032928GPL Power supply: LPG Energy efficiency specifications according to European ErP directive ACS energy efficiency class: A Heating energy efficiency class: A Load profile: XL Performance ACS thermal capacity: 32.7 kW Heating heat output: 28.6 kW ACS useful power: 32.0 kW Useful heating power: 28.0 kW Useful thermal efficiency (80 ~ 60 °C) : 97.8% Useful thermal efficiency (40 ~ 30 °C) : 107.2% Adjustable domestic hot water temperature: 30° ~ 60° C Adjustable heating temperature: 20° ~ 85° C Specific flow rate in continuous service of sanitary water (∆t 30 °C): 16.5 l/min Minimum pressure of the sanitary circuit: 0.3 bar NOx emissions: 6 Expansion vessel capacity: 10 litres Electrical protection degree: IPX5D Dimensions and weight Dimensions (LxHxD): 440x748x253 mm Weight: 33.4 Kg Immergas Victrix Tera V2 boiler Wall-mounted and built-in condensing boiler, instantaneous The VICTRIX TERA range of condensing boilers is renewed with a step forward in technology and design . The aesthetics are now more refined in detail, it can also work with 20% hydrogen mixtures and the seasonal efficiency rises to 94% for higher efficiency. There are several technical elements that enhance the performance of the TERA V2 versions starting with the new very high efficiency exchanger in stainless steel which increases the seasonal efficiency and allows to reach the A+ classification when the boiler is associated with advanced thermoregulation. The TERA range is already known for its considerable installation flexibility thanks to its small overall dimensions: it can in fact be placed inside homes, outside in partially protected places or built-in or in technical cabinets even in hybrid configurations. There are two instantaneous versions of 24 and 28 kW, one of 24 kW for heating only which can be combined with domestic boilers of various capacities. The new range allows the recovery of old chimneys with particularly small diameters and, thanks to the safety devices provided and with the help of a specific optional kit, it can be connected to collective flues designed by professionals in positive pressure. The VICTRIX TERA V2 boilers fall into class 6 , the most ecological in the European classification, for low emissions of nitrogen oxides. Maximum flexibility VICTRIX TERA V2 boilers have obtained the Hydrogen Ready certification . The new VICTRIX TERA V2 can now operate on methane, LPG, propane air and a mixture of up to 20% hydrogen . Hydrogen The solution to reduce CO 2 and greenhouse gas emissions in the environment While natural gas emits carbon dioxide into the atmosphere when burned in a boiler, hydrogen does not. Since the heating industry is responsible for the majority of carbon emissions, this new technology could be a key weapon in the fight to achieve net-zero carbon emissions. To give an idea of ​​the environmental benefits, consider that the introduction of the 20% hydrogen blend worldwide would save about 6 million tons of carbon dioxide emissions per year and reduce greenhouse gases by 7% . If the boilers were completely fueled by hydrogen the results would be extraordinary. Stainless steel primary exchanger Highly efficient condensation module made with a single-tube stainless steel exchange coil. The absence of manifolds and parallel circuits guarantees maximum reliability over time: there are no welds. The single stainless steel spiral without constriction allows for a perfectly balanced hydraulic circuit, significantly reducing load losses . The large and constant internal section allows for limited deposits, reducing the risk of clogging in the event of impurities in the water . New aesthetics White dashboard aesthetic cover with grey border and glossy user interface, glass effect, equipped with buttons for making adjustments and central display for viewing the boiler operating parameters. Silver grey silkscreens and symbols. The lower grille for covering the connections is standard New technical solutions highlighted The new TERA V2 range allows for large flue gas exhaust extensions, all 24 kW models can be installed up to 20 m of flexible ducting ø 50, the 28 kW models reach 15 metres. Furthermore, thanks to the clapet valve kit, installation in collective flues in positive pressure is permitted. Remote control VICTRIX TERA V2 can be connected to CAR V2 , CAR V2 WIRELESS, CRD PLUS or MINI CRD, modulating chronothermostats that allow you to control the boiler comfortably from inside the home. The SMARTECH PLUS wireless chronothermostat with Bluetooth technology is also available: it allows you to adjust the heating temperature even with a smartphone through a dedicated app. Combination with solar systems In the case of integration with solar systems, the wide modulation range guarantees maximum sanitary comfort even with pre-heated incoming water. In the instantaneous versions, the solar function inhibits the ignition of the circulator and burner for a time equal to the sanitary delay value set in the parameters. This function is even more efficient with the aid of the solar inlet probe kit that allows the detection of the temperature of the water entering the boiler, coming from a solar boiler. If this temperature is equal to or higher than that set on the selector, the burner and the circulator are kept off for the entire duration of the withdrawal. Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER UNICAL KON M C24 CONDENSING LOW NOX COMPLETE WITH LPG FUME KIT Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power kW 23.6 Seasonal heating energy efficiency ambient ηs 92% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 12.7kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 4.2kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 96.7% Annual electricity consumption QHE GJ: 40 Heating energy efficiency. of water ηWH: 86% Daily fuel consumption Qfuel : 22.0 kWh Sound power level indoors Lwa dB(A) 51 Annual electricity consumption AEC: 400kWh Domestic hot water specific flow rate (Dt 30 °C): 11.2 l/min DHW production in cont. Dt 25 K (mixed): 13.2 l/min Expansion tank capacity: 8 lt Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345mm; 36.5kg KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

Fondital ISCHIA KC 24 kW condensing boiler complete with flue gas exhaust kit Low NOx Methane - ErP Energy efficiency class in heating A XL load profile Nominal thermal power (Pnominal) kW 23 Nominal heat input (Qn) kW 23.7 Seasonal space heating energy efficiency (ηs) % 92 Thermal power (50-30°C) kW 24.9 Heating expansion vessel capacity l 9 Specific sanitary flow rate ΔT=30K l/min 13.4 NOx emission class - 6 Supply voltage/frequency V/Hz 230/50 IP electrical protection degree IPX4D Dimensions 400x700x250 Natural gas supply ISCHIA KC Ischia KC is a sealed chamber condensing boiler with forced draft for the production of hot water for heating and the instantaneous production of domestic hot water; PLUS High domestic hot water production, more power during domestic hot water operation (28 - 30 kW) Class 6 of NOx emissions Modulation ratio 1:9 Multifunction relay for connection to systems with zone valves or external pump management or remote alarm signalling 9 liter expansion tank High efficiency modulating circulator with built-in deaerator TECHNICAL FEATURES LCD user interface with diagnostics Management of 2 types of solar thermal system (with additional kit) Thermoregulation with external probe (optional) Compact, only 250 mm deep Arrangement for connection to the Remote Control (optional, supplied by the manufacturer) Programmable parameters to adapt the boiler to the installation and alarm history Automatic by-pass Heat exchanger in thermopolymers and stainless steel 3-speed circulator with built-in deaerator Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 18/24 AS/1-1 Article code : 0010026087 Power supply: LPG Performance Heating power : 6.0 ~ 18.3 kW Nominal heat input in DHW : 6.0 ~ 24.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 107.8% Domestic hot water production (ΔT = 30K): 11.5 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion vessel Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Kytek COMETA 24/31 kW condensing boiler with free methane or LPG flue gas kit Technical features Model : COMET Maximum thermal power (Pn) (80/60 °C) 23.7 Maximum working pressure 3 bar Maximum domestic hot water potential 31.15 kw Maximum domestic hot water flow rate (?t: 30°C) 14.8 Power supply 230V +%10; -%15V AC-50Hz Dimensions (Height x Width x Depth) 725 x 420 x 288 mm NOx class 5 KYTEK COMET Large hot water production Modulation 1:10 Adaptive gas valve High insulation Inverter circulator Hydraulic group in brass Control Panel LCD display Water pressure switch Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Technical features Model : Victrix Tera 28 V2 Nominal thermal power : 28 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating energy efficiency class: A Seasonal space heating energy efficiency : 94% Performance Heating Thermal Capacity : 5.0 ~ 28.6 kW Heating Thermal Power: 4.8 ~ 28.0 kW Ultimate Thermal Efficiency 30% Pmin : 107.2% Domestic hot water production efficiency: 87% NOx emissions 6 Dimensions and weight Dimensions (LxHxP): 440x750x260 mm Weight : 37Kg Immergas Victrix Tera V2 boiler Head available to the plant Legend X1 = Flow rate (l/h) Y1 = Head (kPa) Y2 = Circulator absorbed power (W) V6 = Speed ​​6 V9 = Speed ​​9 A+B = Head available to the system with by-pass closed B = Head available to the system with by-pass open C+D = Power absorbed by the circulator with by-pass open (dashed area) D = Power absorbed by the circulator with by-pass closed (dashed area) Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Fondital ITACA KC 24 condensing boiler complete with flue gas exhaust kit, dirt separator and standard probe - LPG Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 23.7 kW Rated heat output: 24.9 kW Efficiency at maximum power: 96.7% Efficiency at 30% load: 106.5% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 13.4 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion vessel capacity: 10 l Heating consumption at nominal power Natural gas m3 /h 2.51 DHW consumption at nominal power Natural gas m3 /h 2.89 Total absorbed electric power: 89 W Degree of protection of the electrical panel: IPX5D Dimensions W x H x D mm 420x750x315; 38kg LPG power supply Warranty: 2 years ITHACA taca KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler is equipped with the "DHW comfort" function which keeps the plate exchanger warm for a faster response in the event of a request for domestic hot water. Standard magnetic dirt separator filter. Can be managed with the Spot chronothermostat. PLUS Standard room temperature probe Modulation ratio 1:9 Class 6 of NOx emissions Condensation also in DHW operation thanks to the thermally insulated 26-plate DHW exchanger Management of one heating zone with room temperature probe, which can be extended to two with zone kits Standard management of 2 types of solar thermal system Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling TECHNICAL FEATURES Heating water electronic flow control Heat exchanger in thermopolymers and stainless steel Total premix burner 10 liter heating expansion tank Thermoregulation with external probe (optional) Modulating circulator with built-in deaerator DHW comfort function: ★★★ Automatic by-pass Double loading system: automatic and manual Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Fondital ITACA KC 24 condensing boiler complete with flue gas exhaust kit, dirt separator and standard probe - methane Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 23.7 kW Rated heat output: 24.9 kW Efficiency at maximum power: 96.7% Efficiency at 30% load: 106.5% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 13.4 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion tank capacity: 10 l Heating consumption at nominal power Natural gas m3 /h 2.51 DHW consumption at nominal power Natural gas m3 /h 2.89 Total absorbed electric power: 89 W Degree of protection of the electrical panel: IPX5D Dimensions W x H x D mm 420x750x315; 38kg Natural gas supply Warranty: 2 years ITHACA taca KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler is equipped with the "DHW comfort" function which keeps the plate exchanger warm for a faster response in the event of a request for domestic hot water. Standard magnetic dirt separator filter. Can be managed with the Spot chronothermostat. PLUS Standard room temperature probe Modulation ratio 1:9 Class 6 of NOx emissions Condensation also in DHW operation thanks to the thermally insulated 26-plate DHW exchanger Management of one heating zone with room temperature probe, which can be extended to two with zone kits Standard management of 2 types of solar thermal system Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling TECHNICAL FEATURES Heating water electronic flow control Heat exchanger in thermopolymers and stainless steel Total premix burner 10 liter heating expansion vessel Thermoregulation with external probe (optional) Modulating circulator with built-in deaerator DHW comfort function: ★★★ Automatic by-pass Double loading system: automatic and manual Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Fondital Formentera KC 24 condensing boiler complete with Low NOx LPG fume exhaust kit Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 23.7 kW Rated heat output: 24.9 kW Efficiency at maximum power: 96.7% Efficiency at 30% load: 105.1% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 13.4 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion tank capacity: 10 l DHW consumption at nominal power Natural gas m3 /h 2.89 Total absorbed electric power: 89 W Degree of protection of the electrical panel: IPX5D Dimensions (hxlxp) 750x420x315 mm; 38.5kg LPG power supply Warranty: 2 years FORMENTERA Formentera KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler, unlike the storage ones, allows instantaneous production of domestic hot water and uses condensing technology which allows a reduction in consumption, high efficiency and low emissions of pollutants. PLUS Modulation ratio 1:9 Touch screen user interface Standard management of 2 types of solar thermal system Boiler room temperature adjustment with external probe Sanitary heat exchanger with 26 plates TECHNICAL FEATURES Heat exchanger in thermopolymers and stainless steel Total premix burner Modulating gas valve with constant air/gas ratio Variable speed combustion fan 3-speed circulator with built-in deaerator 10 liter heating expansion tank Motorized diverter valve Installation flexibility thanks to the IPX5D electrical protection degree Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling Availability of the boiler change kit as an accessory Efficiency classification according to 92/42/EEC: ★★★★ NOx emission class (EN 297): 5 Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less