ATTENTION THE BOILER IS SUPPLIED WITH METHANE. CERTIFIED LPG OPERATION USING A SPECIAL KIT TO BE REQUESTED IN ADVANCE FROM THE AUTHORIZED AREA SERVICE CENTER Ferroli DIVACONDENS D PLUS F24 LOW NOx condensing boiler complete with flue gas exhaust kit WITH RBM DIRT SEPARATOR INCLUDED Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Performance Heat input Min Max Heating kW kW 7.5 25.0 Thermal power 80°C - 60°C Min Max Heating kW 7.2 24.2 Useful thermal efficiency 30% Pmin % 100.1 Domestic hot water production Δt 25°C Δt 30°C l/min l/min 13.9 11.6 NOx emissions 6 Dimensions WxHxD mm 400x700x330; 35kg DIVACONDENS D PLUS DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. Characteristics > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels > Compact geometry primary exchanger > Instant production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit > Forced draught sealed chamber boiler, with water-cooled atmospheric burner with low NOx emissions > Standard automatic hydraulic by-pass > Minimum polluting emissions (class 6 according to EN 15502-1) > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote timer control > Simple and complete control panel, display user interface, with setting keys > Robust post-condenser fed by the closed circuit of the primary. The heat exchange with the fumes takes place inside large diameter water passages. > Generator with simple and rational operation > ECO function in DHW for greater savings in the period of low use of hot water > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Place of installation: also for outdoors in a partially protected place down to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center > Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre Boiler control The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. The performances Energy classification DHW load profile (maximum flow rate at the corresponding efficiency declared in DHW) Efficiency in the production of domestic hot water FOR COMBINED BOILERS The "climate-energy 20/20/20" package includes ambitious targets for reducing greenhouse gas emissions, of energy consumption as well as the increase in the use of renewable energies, corresponding to a percentage of 20% to be reached by 2020. In this context, the European regulation ErP (Energy Related Products) introduces an energy classification also for water generators hot water for space heating and domestic hot water purposes. This classification translates into an energy label which must necessarily accompany all the products affected by the Regulation, introduced on the market from 26 September 2015. The labeling constitutes an easy guide for the consumer, who can choose - through standardized and objective indications - the product more efficient. In this way, the choice will be the most sparing in terms of consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the eventual production of domestic hot water, according to a scale which, in the case of the single boiler product, ranges from A to G*. Furthermore, for combined boilers, a load profile is indicated corresponding to the DHW flow rate of the appliance measured in a series of typical samplings, guaranteeing at least the declared DHW efficiency. This index is identified with a letter/”size” (S, M …XXL). Solar circuit integration DIVACONDENS D PLUS boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and switches on the burner only if necessary. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. Safety and comfort ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D PLUS adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

MURAL Riello START AR 25 Kis LOW NOx condensing boiler cod. 20176940 complete with LPG fume exhaust kit - NEW Seasonal space heating efficiency class B Water heating energy efficiency class A HEATING Nominal heat input (Hi) kW 25.00 Nominal thermal power (80÷60 °C) kW 23.95 SANITARY Nominal heat input (Hi) kW 25.00 Nominal thermal power (*) kW 25.00 CHARACTERISTICS Nox class - UNI EN 483 6 Quantity of hot water at ∆t 25°C l/min 14.3 Dimensions HxWxD mm 715x405x250 LPG supply START AR 25 The new START AR is the condensing boiler specifically designed to operate with high temperatures and therefore with radiator systems. Still improved in performance, it is available in a power of 25 kW with reduced NOx emissions <56 mg/kWh. New digital interface Even more compact dimensions also for built-in Innovative gas-air combustion system Hydraulic connections with DIN sequence Cooled burner Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Mounting crossbar, power supply cable supplied Hydraulic connections available as an accessory IPX5D electrical protection degree NEW DIGITAL INTERFACE START AR is equipped with a modern backlit display which allows immediate and complete reading of the information, also through the language of icons. Six intuitive keys allow you to easily make adjustments and access parameter configuration. INNOVATIVE POST-EXCHANGER Stainless steel finned pack heat recovery unit, in thermoplastic container, ideal for high temperature systems. Preheating function of the primary circuit, using the residual heat of the exhaust fumes and of the low NOx cooled burner. Reduced need for cleaning. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: in the absence of the ciao at, the NEW CIAO AT 25 LN LOW NOX model will be sent BERETTA CIAO AT 25 CSI CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP Product code: 20113788 Characteristics: Energy efficiency in heating: B Energy efficiency Sanitary: A Sanitary load profile: XL Nominal heat input: 25 kW Electric Power: 129W Supply voltage/frequency: 230/50 Volt/Hz Electrical protection degree: X5D ip Dimensions HxWxD: 780 x 400 x 338 ; 40 Kg Gas version available: METHANE Warm-up exercise: Maximum pressure and temperatures: 3/90 bar/°C Heating temperature selection range: 40/80 °C Pump: pump head available for the system: 266 m/bar Expansion tank capacity: 8 l Healthcare exercise: Maximum pressure: 6 bars Minimum pressure: 0.15 bar Quantity of hot water with ∆t=25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min DHW temperature selection range: 37 - 60 °C Beretta HELLO AT Hi AT, ideal for replacement in systems with radiators. Ciao AT is the innovative condensing boiler specifically designed by Beretta for traditional high temperature systems (radiators and radiators). The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this allows to obtain very high performance in terms of efficiency and therefore a significant energy saving. High performance and low consumption In the Ciao AT boiler, the water in the primary circuit passes through an additional exchanger, which allows you to recover energy that would otherwise be wasted. This process makes it possible to recover latent heat and therefore to further increase the performance of the boiler. The energy saving offered by a boiler is greater the higher its efficiency: Ciao AT therefore allows you to reduce gas consumption compared to a boiler without an additional exchanger. Management: The electronic panel is the interface for managing the boiler. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. The liquid crystal display provides information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. The Ciao AT technology makes use of the condensing exchanger which recovers the latent heat of the fumes, the same principle used by condensing boilers. The exchanger, located at the top left, is connected directly to the fan which pushes the fumes inside it, before they are definitively expelled. The difference in the temperature of the fumes between the ~140°C inlet and the ~65°C outlet of the condensing exchanger is indicative of the amount of heat recovered from them. The return from the system first passes through the condensing exchanger which recovers the heat from the fumes, and then passes through the primary exchanger, where it receives the remaining heat in order to reach the required flow temperature. The water then recovers part of the heat from the fumes, which would otherwise be expelled into the atmosphere, thus giving rise to less waste and consequently greater savings for the user. Outdoor installation: Ciao AT is designed to also be installed outdoors in partially protected places thanks to the dedicated accessories (bottom cover kit and top cover kit) and board anti-freeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit with which the lower cover is required. Up to 17 meters of Ø 60 ducting with the Ciao AT boiler: With Ciao AT it is possible to comfortably duct even the most "difficult" flues thanks to the approval for Ø 60mm flue systems which is added to the traditional Ø 80 mm ducting flue system. The main 60mm flue ducts are available in the Beretta price list catalogue, while the boiler manuals provide indications of the maximum length, which differ according to the boiler power. TECHNICAL FEATURES: Specific for systems with radiators and radiators (at high temperature) Condensing post exchanger in aluminum alloy Possibility of outdoor installation with antifreeze heater kit (optional) IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Low consumption circulator 6 m (EEI≤0.20) Hydraulic connections cover (optional) Condensate collection neutralizer drawer kit (optional) Template, hydraulic fittings, gas and sanitary taps (optional) For gas conversion, contact authorized Beretta Technical Assistance Centres Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA L'IMBALLO DANNEGGIATO. Caldaia Murale Riello START 30 Kis LOW NOx a condensazione cod. 20187407 completa di kit scarico fumi Metano Classe di efficienza stagionale del riscaldamento d'ambiente A Classe di efficienza energetica di riscaldamento dell'acqua- A Potenza nominale P nominale kW 19 Efficienza energetica stagionale del riscaldamento d'ambiente % 93 RISCALDAMENTO Portata termica nominale :kW 20,00 Potenza termica nominale (80÷60 °C) kW 24,38 Potenza termica nominale (50÷30 °C) kW 26,78 Portata termica ridotta : kW 3,95 Potenza termica ridotta (80÷60 °C) kW 3,79 Potenza termica ridotta (50÷30 °C) kW 4,09  SANITARIO Portata termica nominale kW 30,00 Potenza termica nominale kW 30,00 Portata termica ridotta kW 3,95 Potenza termica ridotta (*) kW 3,95 RENDIMENTI Rendimento utile Pn max-Pn min (80°-60°) % 97,5 - 96,0 Rendimento utile Pn max-Pn min (50°-30°) % 107,1 - 103,6 Rendimento utile 30 % (ritorno 30°C) % 108,8 Rendimento a P media Range Rated (80°-60°) % - 97,3 Rendimento a P media Range Rated 30% (30° ritorno) % - 109,0 Rendimento di combustione % 97,7 Perdite al camino con bruciatore acceso (Pn max) % 2,3 Perdite al camino con bruciatore spento % 0,08 Perdite al mantello con bruciatore acceso (Pn max) % 0,2 SCARICO FUMI Classe Nox - UNI EN 15502: 6 Prevalenza residua tubi concentrici 0,85 m ø 60-100 mm Pa : 60 Prevalenza residua tubi separati 0,5 m ø 80 mm Pa : 190 Prevalenza residua caldaia senza tubi e senza flangia Pa 196 CARATTERISTICHE ELETTRICHE Potenza elettrica (Pel max risc.- Pel max san.) W 85 - 102 Potenza elettrica circolatore (1000 l/h) W 42 Tensione di alimentazione V - Hz 230-50 Grado di protezione IP X5D ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Pressione minima per il funzionamento standard bar 0,25 Temperatura massima °C 90 Pompa: prevalenza max disponibile all'impianto mbar 408 alla portata di l/h 1000 Vaso di espansione a membrana l 8  Precarica vaso di espansione bar 1 ESERCIZIO SANITARIO - VERSIONE ISTANTANEA Pressione massima bar - 8 Pressione minima bar - 0,5 Quantità di acqua calda con ?t 25°C l/min - 17,2 con ?deltat 30°C l/min 14,3 con deltat 35°C l/min - 12,3 Portata minima acqua sanitaria l/min - 2 Campo di selezione della temperatura H2O san. °C - 37/60 Regolatore di flusso l/min – 12 Nuova Start START è la nuova proposta, completamente rinnovata dal punto di vista tecnologico e funzionale, di caldaie a condenazione Riello per utenze domestiche di piccole e medie dimensioni. START è disponibile in 3 taglie 15, 25, 30 kW, in versioni combinate (KIS) e solo riscaldamento (IS). Una delle caratteristiche distintive della nuova START è l’innovativo pannello comandi digitale con tasti touch progettato con una particolare attenzione alla facilità di utilizzo. Scambiatore sanitario ad alta efficienza sviluppato da Riello HMI touchscreen moderna e intuitiva, con icone rappresentative e tasti capacitivi con suono acustico “buzzer” Design moderno e lineare con copertura raccordi inferiori sotto-caldaia disponibile come accessorio per un'ottima integrazione estetica Funzioni elettroniche specifiche sanitarie: ritardo sanitario, funzione anti-pendolazione e ventilatore smart Gruppo idraulico con sequenza a standard DIN Circolatore basso consumo (IEE?0,20) 7 m ad alta prevalenza disponibile come accessorio Facilità di installazione, integrazione anche in spazi contenuti e sostituzione grazie all'ampia ampia scelta di accessori disponibili come optional Rapporto di modulazione 1:8 Facile manutenzione e pulizia della camera di combustione grazie all'accesso frontale allo scambiatore – Efficienza stagionale 93% Vaso espansione laterale da 8 litri  Flangia fumi di serie con fumisteria dedicata Termoregolazione di serie in abbinamento alla sonda esterna, disponibile come accessorio Possibilità di installazione anche ad incasso (modello 25 KIS e 30 KIS) ed all'esterno in luoghi parzialmente protetti (IPX5D) Traversa di montaggio già integrata in caldaia e cavo di alimentazione elettrica a corredo Funzionamento a metano di serie con possibilità di trasformazione a GPL (G31) e aria propanata tramite accessori. Tale modifica è a cura dell'istallatore o del servizio tecnico di assistenza. Grado di protezione elettrica IPX5D. Garanzia Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE  IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA AMMACCATURE SUI PANNELLI LATERALI E L'IMBALLO È USURATO (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia MURALE Riello START 30 Kis LOW NOx a condensazione cod. 20187407 completa di kit scarico fumi Metano Classe di efficienza stagionale del riscaldamento d'ambiente A Classe di efficienza energetica di riscaldamento dell'acqua- A Potenza nominale P nominale kW 19 Efficienza energetica stagionale del riscaldamento d'ambiente % 93 RISCALDAMENTO Portata termica nominale :kW 20,00 Potenza termica nominale (80÷60 °C) kW 24,38 Potenza termica nominale (50÷30 °C) kW 26,78 Portata termica ridotta : kW 3,95 Potenza termica ridotta (80÷60 °C) kW 3,79 Potenza termica ridotta (50÷30 °C) kW 4,09  SANITARIO Portata termica nominale kW 30,00 Potenza termica nominale kW 30,00 Portata termica ridotta kW 3,95 Potenza termica ridotta (*) kW 3,95 RENDIMENTI Rendimento utile Pn max-Pn min (80°-60°) % 97,5 - 96,0 Rendimento utile Pn max-Pn min (50°-30°) % 107,1 - 103,6 Rendimento utile 30 % (ritorno 30°C) % 108,8 Rendimento a P media Range Rated (80°-60°) % - 97,3 Rendimento a P media Range Rated 30% (30° ritorno) % - 109,0 Rendimento di combustione % 97,7 Perdite al camino con bruciatore acceso (Pn max) % 2,3 Perdite al camino con bruciatore spento % 0,08 Perdite al mantello con bruciatore acceso (Pn max) % 0,2 SCARICO FUMI Classe Nox - UNI EN 15502: 6 Prevalenza residua tubi concentrici 0,85 m ø 60-100 mm Pa : 60 Prevalenza residua tubi separati 0,5 m ø 80 mm Pa : 190 Prevalenza residua caldaia senza tubi e senza flangia Pa 196 CARATTERISTICHE ELETTRICHE Potenza elettrica (Pel max risc.- Pel max san.) W 85 - 102 Potenza elettrica circolatore (1000 l/h) W 42 Tensione di alimentazione V - Hz 230-50 Grado di protezione IP X5D ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Pressione minima per il funzionamento standard bar 0,25 Temperatura massima °C 90 Pompa: prevalenza max disponibile all'impianto mbar 408 alla portata di l/h 1000 Vaso di espansione a membrana l 8  Precarica vaso di espansione bar 1 ESERCIZIO SANITARIO - VERSIONE ISTANTANEA Pressione massima bar - 8 Pressione minima bar - 0,5 Quantità di acqua calda con ?t 25°C l/min - 17,2 con ?deltat 30°C l/min 14,3 con deltat 35°C l/min - 12,3 Portata minima acqua sanitaria l/min - 2 Campo di selezione della temperatura H2O san. °C - 37/60 Regolatore di flusso l/min – 12 Nuova Start START è la nuova proposta, completamente rinnovata dal punto di vista tecnologico e funzionale, di caldaie a condenazione Riello per utenze domestiche di piccole e medie dimensioni. START è disponibile in 3 taglie 15, 25, 30 kW, in versioni combinate (KIS) e solo riscaldamento (IS). Una delle caratteristiche distintive della nuova START è l’innovativo pannello comandi digitale con tasti touch progettato con una particolare attenzione alla facilità di utilizzo. Scambiatore sanitario ad alta efficienza sviluppato da Riello HMI touchscreen moderna e intuitiva, con icone rappresentative e tasti capacitivi con suono acustico “buzzer” Design moderno e lineare con copertura raccordi inferiori sotto-caldaia disponibile come accessorio per un'ottima integrazione estetica Funzioni elettroniche specifiche sanitarie: ritardo sanitario, funzione anti-pendolazione e ventilatore smart Gruppo idraulico con sequenza a standard DIN Circolatore basso consumo (IEE?0,20) 7 m ad alta prevalenza disponibile come accessorio Facilità di installazione, integrazione anche in spazi contenuti e sostituzione grazie all'ampia ampia scelta di accessori disponibili come optional Rapporto di modulazione 1:8 Facile manutenzione e pulizia della camera di combustione grazie all'accesso frontale allo scambiatore – Efficienza stagionale 93% Vaso espansione laterale da 8 litri  Flangia fumi di serie con fumisteria dedicata Termoregolazione di serie in abbinamento alla sonda esterna, disponibile come accessorio Possibilità di installazione anche ad incasso (modello 25 KIS e 30 KIS) ed all'esterno in luoghi parzialmente protetti (IPX5D) Traversa di montaggio già integrata in caldaia e cavo di alimentazione elettrica a corredo Funzionamento a metano di serie con possibilità di trasformazione a GPL (G31) e aria propanata tramite accessori. Tale modifica è a cura dell'istallatore o del servizio tecnico di assistenza. Grado di protezione elettrica IPX5D. Garanzia Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

 ATTENZIONE  IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA UNA RIPARAZIONE AD UNA PLASTICA INTERNA, GRAFFI ED AMMACCATURE LATERALI E L'IMBALLO È USURATO. (PER MAGGIORI INFORMAZIONI VISUALIZZA LE FOTO ACCANTO L'IMMAGINE PRINCIPALE)  La caldaia verrà fornita a metano, per il funzionamento a GPL bisogna rivolgersi al Centro Assistenza Autorizzato di zona.  Caratteristiche Tecniche Modello : Divacondens D Plus Potenza Termica nominale : 24 kW Alimentazione : Metano Specifiche Efficienza Energetica secondo direttiva Europea ErP Classe Efficienza Energetica Riscaldamento : B Efficienza Energetica Stagionale per il Riscaldamento d'ambiente : 89% Performance Portata Termica Riscaldamento : 7,5 ~ 25,0 kW Potenza Termica Riscaldamento : 7,2 ~ 24,2 kW Rendimento Termico Ultile 30% Pmin : 100,1 % Produzione Acqua Calda Sanitaria 25°C Δt 30°C : 13,9 ~ 11,6 l/min Emissioni NOx 6 Dimensioni e Peso Dimesioni (LxHxP) : 400x700x330 mm Peso : 35 Kg Caldaia Ferroli Divacondens D Plus La Soluzione Più Semplice Per Una Caldaia a Condensazione   DIVACONDENS D PLUS è il generatore di calore a condensazione per i sistemi di riscaldamento tradizionali. La collaudata tecnologia Ferroli nel campo delle caldaie murali tradizionali è stata arricchita incrementando le prestazioni del prodotto nel modo più semplice, con l’utilizzo di un robusto recuperatore che preriscalda il circuito primario utilizzando il calore residuo dei fumi di scarico e di un nuovo bruciatore raffreddato a basse emissioni di NOx. La Gamma Divacondens D Plus è proposta in un unico modello per riscaldamento e produzione istantanea di acqua calda sanitaria Caratteristiche> Caldaia a condensazione per il riscaldamento di impianti ad alta temperatura e produzione di acqua calda sanitaria. Non risulta idonea all’abbinamento con mandata diretta ad impianti con pannelli radianti a bassa temperatura > Scambiatore primario a geometria compatta > Produzione istantanea di acqua calda sanitaria con scambiatore a piastre dedicato > Post-recuperatore del calore latente di condensazione, in funzione di pre-riscaldo del circuito primario > Caldaia a camera stagna e tiraggio forzato, con bruciatore atmosferico raffreddato ad acqua a basse emissioni di NOx > By-pass idraulico automatico di serie > Minime emissioni inquinanti (classe 6 secondo EN 15502-1) > Circolatore alta efficienza a basso consumo (ErP - Classe A) con sistema antibloccaggio tramite attivazione per alcuni secondi ogni 24 ore di inattività > Abbinabile al cronocomando remoto modulante > Pannello comandi semplice e completo, interfaccia utente a display, con tasti di impostazione > Robusto post-condensatore alimentato dal circuito chiuso del primario. Lo scambio termico con i fumi avviene all’interno di passaggi d’acqua di grande diametro. > Generatore dal funzionamento semplice e razionale > Funzione ECO in sanitario per un maggior risparmio nel periodo di scarso utilizzo di acqua calda > Predisposizione impianti solari: predisposta per la produzione di acqua calda sanitaria combinata con impianti a pannelli solari > Luogo di installazione: anche per esterno in luogo parzialmente protetto fino a -5°C di serie > Funzionamento certificato anche ad aria propanata (50% aria - 50% G31) mediante apposita trasformazione da richiedere al Centro Assistenza Autorizzato > Funzionamento anche a GPL con l’utilizzo di un apposito kit di conversione da richiedere al Centro Assistenza AutorizzatoControllo in caldaia La centralina di controllo di DIVACONDENS D PLUS consiste in un’interfaccia facile da usare con display retroilluminato. Tramite i pulsanti è possibile regolare facilmente la temperatura di mandata riscaldamento, il setpoint dell’acqua calda sanitaria, accendere / spegnere il generatore o attivare la funzione confort, monitorando lo stato della caldaia. Il pannello di controllo è completato da un manometro tradizionale che può controllare in qualsiasi momento la pressione dell’impianto.Le performanceClassificazione energetica Profilo di carico sanitario (massima portata alla corrispondente efficienza dichiarata in sanitario) Efficienza nella produzione di acqua calda sanitaria PER CALDAIE COMBINATE Il pacchetto “clima-energia 20/20/20” prevede ambiziosi obiettivi di riduzione dell’emissione di gas serra, dei consumi energetici nonché l’incremento dell’uso di energie rinnovabili, corrispondenti ad una percentuale del 20% da raggiungere entro il 2020. In questo ambito, il regolamento europeo ErP (Energy Related Products) introduce una classificazione energetica anche per i generatori di acqua calda ai fini del riscaldamento d’ambiente e dell’acqua calda sanitaria. Tale classificazione si traduce in una etichetta energetica che deve obbligatoriamente accompagnare tutti i prodotti interessati dal Regolamento, introdotti nel mercato dal 26 settembre 2015. L’etichettatura costituisce una facile guida per il consumatore, che può scegliere - tramite indicazioni standardizzate ed oggettive - il prodotto più efficiente. In questo modo la scelta sarà la più parca nei consumi a vantaggio dell’utente, ma anche la più virtuosa per gli equilibri energetici e di conseguenza, per l’ambiente. I parametri più significativi indicati nell’etichetta sono l’indice di efficienza stagionale in riscaldamento e di efficienza nell’eventuale produzione di acqua calda sanitaria, secondo una scala che nel caso del prodotto singolo caldaia si attesta dalla A alla G*. Inoltre per le caldaie combinate viene indicato un profilo di carico corrispondente alla portata sanitaria dell’apparecchio misurata in una serie di prelievi-tipo, garantendo almeno l’efficienza in sanitario dichiarata. Tale indice viene identificato con una lettera/”taglia” (S, M …XXL).Integrazione circuito solareDIVACONDENS D PLUS vanta una elettronica che semplifica l’integrazione con sistemi solari termici, sia a circolazione naturale sia forzata. Il microprocessore controlla la temperatura dell’acqua proveniente dal circuito solare attraverso il sensore di acqua calda sanitaria e accende il bruciatore solo in caso di necessità. Per il raggiungimento della temperatura desiderata, SUN EASY permette un notevole risparmio anche durante le stagioni più fredde, sfruttando e integrando anche il più piccolo contributo solare, altrimenti perso. In caso di irraggiamento insufficiente e quindi un preriscaldo modesto dell’acqua sanitaria, la caldaia contribuirà con il calore necessario per raggiungere la temperatura di setpoint richiesta. Qualora il sole e il sistema solare assolvano al loro “dovere” non sarà necessaria nessuna integrazione da parte della caldaia, l’acqua calda verrà convogliata al rubinetto, senza necessità di dispositivi addizionali, con la miscelazione delle valvole termostatiche.Sicurezza e comfortANTIGELO Nell’eventualità che la temperatura in caldaia scenda a 5°C, il bruciatore si accende automaticamente e il circolatore si attiva al fine di preservare l’apparecchio dai danni causati dal gelo. Tale funzione è attiva con la caldaia alimentata dal circuito gas e sotto tensione elettrica. POST-CIRCOLAZIONE Questa funzione permette di recuperare tutto il calore fornito per inerzia termica dello scambiatore e trasferirlo al sistema di riscaldamento, e di conseguenza ai locali da riscaldare. Si tratta di una funzione timer (di durata personalizzabile) ed è attiva dopo che il bruciatore si spegne in modalità di riscaldamento. FUNZIONAMENTO IN TEMPERATURA SCORREVOLE Con l’installazione del kit “Sonda esterna” è possibile far funzionare la caldaia in temperatura scorrevole. Ciò significa che senza agire sui tasti di regolazione della temperatura di impianto, la caldaia si autoregolerà in funzione delle variazioni delle temperature esterne. Tutto questo si traduce in risparmio energetico pur garantendo il massimo comfort all’utente. EASY CONTROL La scheda elettronica di DIVACONDENS D PLUS adotta il protocollo Opentherm. Esso permette l’integrazione di altre centraline periferiche come, ad esempio, il cronocomando remoto ROMEO. Lo standard Opentherm infatti è stato appositamente studiato per condividere le logiche e gli algoritmi di funzionamento della caldaia con altre centraline aggiuntive. In quanto protocollo digitale, consente una totale integrazione tra caldaia e satellite, con il pieno controllo delle funzioni dalla caldaia e similmente dal suo satellite. Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENTION THE BOILER HAS IRREGULARITIES ALONG THE LOWER GRILLE, A REPAIR TO THE INTERNAL PLASTIC, FRONT BULKS, FRONT RECESS, SIDE CURVE AND A SLIGHTLY IRREGULAR REAR SUPPORT. (FOR MORE INFORMATION ON THE DAMAGE VIEW THE FOLLOWING PHOTOS) Technical Features Model : Divacondens D Plus Nominal Thermal Power: 24 kW Power supply: Methane The boiler will be supplied with methane, for operation with LPG you must contact the local Authorised Assistance Centre Energy Efficiency Specifications according to European ErP Directive Heating Energy Efficiency Class: B Seasonal Energy Efficiency for Space Heating: 89% Performance Heating Thermal Capacity: 7.5 ~ 25.0 kW Heating Thermal Power: 7.2 ~ 24.2 kW Thermal efficiency ultile 30% Pmin : 100,1 % Domestic Hot Water Production 25°C Δt 30°C : 13.9 ~ 11.6 l/min NOx Emissions 6 Dimensions and Weight Dimensions (LxHxD): 400x700x330 mm Weight: 35 Kg Ferroli Divacondens D Plus Boiler The Simplest Solution For A Condensing Boiler DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The proven Ferroli technology in the field of traditional wall-mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator that preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. The Range Divacondens D Plus is offered in a single model for heating and instantaneous production of domestic hot water Characteristics > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct flow to systems with low temperature radiant panels > Compact geometry primary exchanger > Instantaneous production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, as a pre-heating function of the primary circuit > Sealed chamber and forced draught boiler, with water-cooled atmospheric burner with low NOx emissions > Automatic hydraulic by-pass as standard > Minimum polluting emissions (class 6 according to EN 15502-1) > High efficiency, low consumption circulator (ErP - Class A) with anti-blocking system through activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote control > Simple and complete control panel, display user interface, with setting buttons > Robust post-condenser powered by the primary closed circuit. Heat exchange with the flue gases occurs inside large diameter water passages. > Generator with simple and rational operation > ECO function in sanitary mode for greater savings in periods of low hot water usage > Solar system provision: provision for the production of domestic hot water combined with solar panel systems > Installation location: also for outdoor use in a partially protected place up to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) through a specific conversion to be requested from the Authorized Assistance Center > Also works with LPG using a special conversion kit to be requested from the Authorized Service Center Boiler check The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, you can easily adjust the heating flow temperature, the domestic hot water setpoint, turn the generator on/off or activate the comfort function, monitoring the boiler status. The control panel is completed by a traditional pressure gauge that can check the system pressure at any time. The performances Energy classification Domestic hot water load profile (maximum flow rate at the corresponding declared efficiency in domestic hot water) Efficiency in domestic hot water production FOR COMBINATION BOILERS The “climate-energy 20/20/20” package includes ambitious objectives for reducing greenhouse gas emissions, energy consumption and increasing the use of renewable energy, corresponding to a percentage of 20% to be achieved by 2020. In this context, the European ErP (Energy Related Products) regulation introduces an energy classification also for hot water generators for space heating and domestic hot water. This classification translates into an energy label that must accompany all products affected by the Regulation, introduced on the market from 26 September 2015. The labelling is an easy guide for the consumer, who can choose - through standardised and objective indications - the most efficient product. In this way the choice will be the most economical in consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the possible production of domestic hot water, according to a scale that in the case of the single boiler product ranges from A to G*. Furthermore, for combined boilers a load profile is indicated corresponding to the domestic hot water flow rate of the appliance measured in a series of standard samplings, guaranteeing at least the declared domestic hot water efficiency. This index is identified with a letter/”size” (S, M …XXL). Solar circuit integration DIVACONDENS D PLUS boasts electronics that simplify integration with solar thermal systems, both natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and turns on the burner only when necessary. To reach the desired temperature, SUN EASY allows significant savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. In the event of insufficient radiation and therefore modest preheating of the domestic water, the boiler will contribute with the heat necessary to reach the required setpoint temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. Safety and comfort ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator activates in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function allows you to recover all the heat provided by the thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (with customizable duration) and is active after the burner switches off in heating mode. SLIDING TEMPERATURE OPERATION By installing the “External probe” kit, it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment buttons, the boiler will self-regulate based on variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The DIVACONDENS D PLUS electronic board uses the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. The Opentherm standard has in fact been specifically designed to share the boiler's operating logic and algorithms with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the boiler's functions and similarly from its satellite. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO SuperEVOdens 24 S* METHANE CONDENSING Boiler Complete with Fume Exhaust Kit - ErP Model: SuperEVOdens 24S ErP specifications Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Heating/DHW nominal heat input: 25 kW Heating/DHW maximum useful power: 24.4 kW Yield name 60°/80°C: 97.4% Yield at 30% load: 98.9% High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) NOx class 2 Weighted NOx: 166 mg/kWh Minimum/maximum heating temperature: 40/85°C Minimum/maximum heating pressure 3.0/0.3 bar Expansion vessel capacity 8 l (total) Minimum/maximum domestic hot water temperature 35/60°C Maximum flow rate (ΔT=25K)/(ΔT=35K): 13.9/10 l/min Specific sanitary flow rate (ΔT=30 K): 11.6 l/min Voltage / Power at nominal heat input V~/ W 230/82 IPX4D degree of protection Dimensions HxWxD 803x400x350; 42.5 kgs Power supply: methane or LPG Standard Digital electronic room thermostat Boiler support bracket and paper template Condensate collection siphon Quick instruction to the user SuperEVO dens SuperEVOdens is the condensing boiler designed for traditional systems and easily adaptable to new underfloor systems using SIMpatico, a hot water distribution device for heating Savings and ease of use SuperEVOdens maintains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler deriving from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads SuperEVOdens to have higher yields than traditional boilers. High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Copper lamellar primary heat exchanger with large exchange surface and double circulation Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Digital control panel with backlit display Electronic card for: - Restart frequency adjustment - Adjustable primary circuit thermal inertia disposal - Circulator mode selection - Circulator anti-seize - Antifreeze safety - Chimney sweep function Integrated automatic by-pass 8 liter expansion vessel Immunity to radio interference Magnetic sanitary flow switch Absolute heating pressure switch IPX4D degree of protection High circulation primary exchanger It is the element that distinguishes the entire Savio range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system and facilitates the transmission of heat to the radiators. Heat recovery The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator is made of aluminium, has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly Command panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO SuperEVOdens 28 S* LPG CONDENSING Boiler Complete with Fume Exhaust Kit - ErP Model: SuperEVOdens 24S ErP specifications Class B heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Heating/DHW nominal heat input: 25 kW Heating/DHW maximum useful power: 24.4 kW Yield name 60°/80°C: 97.4% Yield at 30% load: 98.9% High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) NOx class 2 Weighted NOx: 166 mg/kWh Minimum/maximum heating temperature: 40/85°C Minimum/maximum heating pressure 3.0/0.3 bar Expansion tank capacity 8 l (total) Minimum/maximum domestic hot water temperature 35/60°C Maximum flow rate (ΔT=25K)/(ΔT=35K): 13.9/10 l/min Specific sanitary flow rate (ΔT=30 K): 11.6 l/min Voltage / Power at nominal heat input V~/ W 230/82 IPX4D degree of protection Dimensions HxWxD 803x400x350; 42.5 kgs Power supply: methane or LPG Standard Digital electronic room thermostat Boiler support bracket and paper template Condensate collection siphon Quick instruction to the user SuperEVO dens SuperEVOdens is the condensing boiler designed for traditional systems and easily adaptable to new underfloor systems using SIMpatico, a hot water distribution device for heating Savings and ease of use SuperEVOdens maintains the simplicity of management, programming and regulation of the traditional boiler and imports the savings of the condensing boiler deriving from the recovery of heat from the fumes. The heat recovery unit preheats the system water with the heat released by the fumes, heat which in traditional boilers is dispersed into the environment. This recovery of energy from the fumes, at typical operating temperatures of radiator systems, leads SuperEVOdens to have higher yields than traditional boilers. High yields (in compliance with yield directive 92/42 EEC and Legislative Decree 311/06) Copper lamellar primary heat exchanger with large exchange surface and double circulation Aluminum heat recovery unit to exploit the heat of the fumes and transfer it to the water Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Digital control panel with backlit display Electronic board for: - Restart frequency adjustment - Adjustable primary circuit thermal inertia disposal - Circulator mode selection - Circulator anti-seize - Antifreeze safety - Chimney sweep function Integrated automatic by-pass 8 liter expansion vessel Immunity to radio interference Magnetic sanitary flow switch Absolute heating pressure switch IPX4D degree of protection High circulation primary exchanger It is the element that distinguishes the entire Savio range. It favors the flow of water into the heating system and, thanks to its reduced hydraulic resistance, adapts the boiler to the system and facilitates the transmission of heat to the radiators. Heat recovery The heat recovery recovers the heat from the fumes before they are expelled and preheats the water directed to the primary exchanger. The recuperator is made of aluminium, has a finned coil which determines a large exchange surface and has a device to ensure that the boiler discharges the condensate correctly Command panel Summer/winter/off selector Heating temperature regulator DHW temperature regulator Digital and analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history Recommended fill display Display annual periodic maintenance expiry Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO FAMILY AR 25 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT - NEW ErP Technical characteristics Product code: 20100508 Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Furnace thermal power (heating) min-max: 8.5÷25.0 kW Useful thermal power (sanitary) min-max: 8.5÷25.0 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 96.2% Profit return 30% (47th return): 95.3% Sealed chamber, forced draught Quantity of hot water with Δt 25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 845 x 400 x 332 ; 42 kgs Electrical protection degree: IP X5D NOx class: 2 Power supply: METHANE FAMILY AR Yield **** Combined models for heating and domestic hot water production Family AR is the new generation condensing boiler specifically designed to operate with high temperatures (80°C delivery and 60°C return) and therefore in radiator systems. Family AR contains Altaresa condensing technology in the aesthetics and in the special Family functions. Family AR has an Air/Gas combustion (patented): thanks to the modulating fan, the mixture of air and gas is kept optimal and constant over the entire power range, always maintaining high efficiency. Thanks to the treated aluminum post-exchanger, very high yields up to 102.9% are obtained. The climatic regulation is managed directly by the boiler control unit, via the external probe (accessory), it allows the temperature of the heating system to be suitably adapted to the external climatic conditions. The equipment is completed by anti-freeze systems (down to -3°C), circulator anti-blocking systems, three-way valve, Wellness button and rapid button which reduces the waiting times for domestic hot water. Family AR is available with powers of 25, 29 and 35 kW. Characteristics: Technology, ease of control and management: • Memory key: activates machine intelligence. - sanitary: hot water always ready and without waste, according to the usage habits of the family. - in heating: reduction of home heating times. • Wellness key: maintains hot water delivery at the ideal temperature for the shower (40°C customizable +/- 5°C). • Touch&Go function: directly from the tap, it activates pre-heating for just one water draw. • Intelligent system filling: allows you to fill the system in complete autonomy. Air/gas combustion (patented): optimal mixture of gas and air to obtain high and constant efficiency over the entire power range with efficiency up to 102.9%. Condensing exchanger located downstream of the fan for further recovery of the heat contained in the exhaust fumes. Advantages for installation: Efficiency ★★★★ according to Dir. 92/42/CEE. Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Special Family functions: Wellness key, Memory key, Touch&Go function Intelligent system filling Assembly template, hydraulic fittings, power supply cable supplied. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta CIAO AT 29 csi LOW NoX condensing boiler Complete with smoke kit Cod. 20151830 Technical specifications according to ErP directives Model: HELLO AT LOW NOx Sanitary energy efficiency class: A Energy efficiency class in heating: B Load profile: XL Product code 20151830 Natural gas supply Technical features: Indoor/Outdoor installation Nominal heat input 28 kW Nominal thermal power 26.8 kW Nominal thermal power at partial load (30%) 8.5 kW Useful efficiency at nominal power 86.3% n4 New version NOx < 56 mg/kWh IPX5D electrical protection degree Dimensions Dimensions h/w/d (mm): 780/452/336 NB: THE BOILER IS SUPPLIED WITH METHANE, IT CAN BE CONVERTED TO LPG THROUGH THE AREA ASSISTANCE CENTER HELLO AT new LOW NOx model Hi AT, ideal for replacement in systems with radiators Ciao AT is the innovative condensing boiler specifically designed by Beretta for traditional high temperature systems (radiators and radiators). The boiler is equipped with a heat recovery unit on the fumes and combustion in a sealed chamber; this allows to obtain very high performance in terms of efficiency and therefore a significant energy saving. New burner with low NOx emissions Specific for systems with radiators and radiators (at high temperature) Condensing post exchanger in aluminum alloy Possibility of outdoor installation with antifreeze heater kit (optional) IPX5D electrical protection degree Environmental Self-Regulation System (SARA) Low consumption circulator 6 m (EEI≤0.20) Hydraulic connections cover (optional) Condensate collection neutralizer drawer kit (optional) Template, hydraulic fittings, gas and sanitary taps (optional) High performance and low consumption In the Ciao AT boiler, the water in the primary circuit passes through an additional exchanger, which allows you to recover energy that would otherwise be wasted. This process makes it possible to recover latent heat and therefore to further increase the performance of the boiler. The energy saving offered by a boiler is greater the higher its efficiency: Ciao AT therefore allows you to reduce gas consumption compared to a boiler without an additional exchanger. The management The electronic panel is the interface for managing the boiler. Simple and intuitive, it allows you to adjust the boiler parameters and activate the numerous functions. The liquid crystal display provides information on the status of the device and the diagnostic codes. By turning the knobs, the heating water and domestic hot water temperature can be set easily and intuitively. The panel integrates the Sistema Clima Amico function. Compatible with BeSMART The BeSMART WiFi Comfort Control Panel, optional compatible with Ciao AT, is the remote boiler management device with modulating chronothermostat functions. With the WiFi Box accessory, included in the BeSMART WiFi Comfort Control, it is also possible to manage comfort remotely using Smartphones and Tablets. The BeSMART WiFi control is very simple to install and intuitive to use and allows you to adjust the parameters and activate the many functions on the boiler. A large liquid crystal display shows all important information. Using the buttons on the control, the temperature of the heating water and domestic hot water is set easily and intuitively and the heating time programming is carried out. Outdoor installation Ciao AT is designed to also be installed outdoors in partially protected places thanks to the dedicated accessories (bottom cover kit and top cover kit) and board antifreeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit with which the lower cover is required. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

RIELLO START AR 25 KIS LPG CONDENSING BOILER COMPLETE WITH FUME KIT -NEW ErP Product code: 20101168 Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating nominal heat input: 25 kW Heating nominal heat output: 24.35 kW Sanitary nominal heat input: 25 kW Sanitary nominal thermal power: 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn max - Pn min (80°-60°) % 97.4-95.0 Profit return 30% (47th return) % 95.2 Sealed chamber, forced draught Electric power W 123 Quantity of hot water with Δt 25°C: 14.3 l/min Dimensions (hxlxp) mm 780 x 400 x 332 ; 40 Kg Electrical protection degree: IP X5D Power supply: LPG START AR Yield **** Combined models Start AR is the condensing boiler specifically designed to work with high temperatures and therefore with radiator systems; it is specially designed to have a reduced formation of condensate with system return temperatures above 50°C. It is available in powers of 25 and 29 kW. Characteristics: Low consumption circulator (IEE≤0.20) Climatic regulation managed directly by the boiler control unit Assembly template, hydraulic fittings, power supply cable supplied ErP: Energy related Products The new European regulations for heat generators ErP is the acronym of “ Energy related Products ” (products connected to the use of energy) and is the abbreviation that identifies the European Directive ErP 2009/125/EC, defined by the EEC with the intention of reducing the energy consumption of products through eco-compatible design ("eco-design "). The field of action of this European Directive is extremely broad as up to now it has involved products such as light bulbs, air conditioners, washing machines, fans, etc. Following the publication in September 2013 of a series of implementing regulations, starting from 26 September 2015 it will also apply to heating products and the production of domestic hot water. Also from the same date, other regulations will also become effective which will implement the energy labeling of the same product families. The transitional period between the publication of the regulations and their activation throughout the territory of the European Community was necessary to allow the full implementation of the contents by companies and market players. The energy labeling of products for heating and domestic hot water production The regulations issued require that all products intended for heating and/or for the production of sanitary water, with a nominal thermal power lower than or equal to 70 kW, are placed on the market with an energy label that highlights their efficiency class. Note: the regulation provides for the mandatory presence of the energy label for the release of the product from the factories to the market. All products previously introduced, for example present in distribution warehouses, can be regularly marketed even if they do not have an energy label. Various energy labels have been provided based on the use of the generator used: for heating from A++ to G; for the production of domestic hot water from A to G. A new way to guide the consumer The purpose of energy labels is to allow the consumer to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pump products, as has been done for air conditioners, the efficiency figure is reported for the average climatic range.   In addition to the product energy labels, the European regulations have also provided for the creation of a system label in the event that a plant is created in which various appliances, components and controls operate.   This labelling, thanks to the combinations of the data of the various elements used in the plant, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual generators. The European regulation states that the system label must be made available by whoever supplies and/or puts the system into operation (sellers-installers); however, this option is also granted to builders.   Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less