Biasi rinNova adaptive 25s low NOx condensing boiler complete with methane or LPG fume exhaust kit Heating/DHW nominal heat input kW 21.0 / 26.0 Heating/DHW minimum heat input kW 3.0 / 3.0 Heating/DHW maximum useful power 60°/80°C * kW 20.7 / 25.6 Heating/DHW minimum useful power 60°/80°C * kW 2.8 / 2.8 Heating/DHW maximum useful power 30°/50°C ** kW 22.8 / 28.2 Heating/DHW minimum useful power 30°/50°C ** kW 3.2 / 3.2 Yield name 60°/80°C * % 98.4 Yield min. 60°/80°C * % 94.0 Yield name 30°/50°C ** % 108.6 Yield min. 30°/50°C ** % 105.2 NOx class 6 Minimum/maximum heating pressure bar 0.3 / 3 Expansion tank capacity (total/useful) l 7 Maximum flow rate (ΔT=25 K) / (ΔT=35 K) l/min 15.4 / 10.7 Specific sanitary flow rate (ΔT=30 K) ***** l/min 12.8 Voltage/Power at nominal heat input V~/ W 230 / 100 Power at minimum thermal capacity W 52 Degree of protection IPX5D Height x Width x Depth mm 700 x 400 x 300 Weight kg 31.5 Boiler water content 2.0 l Code 20312.0221.0 RinNova adaptive The RinNova Adaptive condensing boiler , unlike traditional boilers, allows you to recover energy by condensing the water vapor contained in the exhaust fumes; that is, for the same amount of heat produced, it consumes less gas and furthermore the exhaust fumes contain fewer substances which are harmful to the environment. The materials that compose it and the regulation systems with which it is equipped offer safety, high comfort and energy savings, so as to be able to fully appreciate the advantages of autonomous heating. RinNova Adaptive is the new BIASI model of wall-mounted condensing boiler . It offers excellent performance and high yields that last over time, thanks to the innovative heat exchanger . Simple to use thanks to the digital control panel, with a display designed to communicate with the user easily and comfortably. Technical features Boiler with single circuit primary exchanger in stainless steel, without joints and/or welds, which maintains high efficiency even on older systems New combustion system with patented gas-adaptive technology (Advanced Adaptive Gas Combustion Control – A²GC²) The electronics continuously analyze the combustion (CO2) through the flame signal and intervene by acting on the gas valve and fan, to allow correct combustion in all terms of use. The electronics allow the boiler to be easily adapted to the various types of gas without having to intervene with a mechanical transformation kit Instant production of domestic hot water with dedicated plate exchanger Domestic hot water pre-heating function: faster delivery of domestic hot water User interface with display and multifunction keys for adjusting and setting the parameters Easy to inspect standard by-pass Chimney Protection System: electronic management of fume overheating, guaranteeing maximum protection of the chimney Ducting on flues: particularly suitable for operation in flues that require ducting with high pressure drops Minimum polluting emissions (class VI - EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection (methane configuration) Removable casing in three pieces for easier maintenance or inspection For SV versions: possibility of setting the maximum power that can be supplied to the external boiler Gas-adaptive technology Less consumption, more efficiency, fewer emissions The innovative Adaptive Gas technology, which all models in the Rinnova line are equipped with, allows the boilers to be adapted in complete autonomy to the different types and qualities of gas. The electrode, in addition to detecting the flame, also detects the characteristics of the gas and automatically adapts the combustion parameters to maintain the maximum level of efficiency, with a consequent reduction in consumption and emissions compared to traditional control systems. The Adaptive gas system makes the boiler ready to operate with any type of gas without transformations. Automatic gas regulation Adaptation to changing gas quality Clean combustion The only model suitable for methane and LPG which allows you to optimize the warehouse In traditional boilers, the combustion values ​​are detected and adjusted only during maintenance, furthermore the composition of the gas network is not always constant and can create operating inefficiencies on boilers without combustion control devices, compromising reliability, savings and the quality of emissions. Thanks to the Gas-Adaptive system, the new condensing boilers electronically control combustion by managing the gas and air supply at best and at all times, automatically adapting the CO2. A "Plastic-FREE" production For a more sustainable environment A fundamental element that guided the entire design phase of the new Rinnova Adaptive boiler is the strong focus on the circular economy. For this we have used components with a higher rate of recyclability, eliminating the use of plastic as much as possible. The plastic group, for example, has been replaced with the brass group, a completely recyclable material. The protective shells of the boiler were made of cardboard and no longer of polystyrene. Furthermore, the front is no longer in plastic but in pressed steel. Thermoregulation Climatic regulation (with optional external probe) and ambient regulation (remote) to allow correct management of the water temperature in order to reduce consumption and consequently a reduction in emissions. By using the climatic regulation, the regulation efficiency also rises, giving greater value to the home. High circulation single coil primary heat exchanger Biasi, introduces the Round heat exchanger in 2017. The great reliability has been demonstrated by adopting it in the Renew Adaptive range. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 26 CS/1-5 Article code : 0010022020 Power supply: methane or LPG Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 12.6 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 103.4% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 34.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta MYNUTE X BOX 25 C Low NOx condensing boiler complete with flue gas kit 20189653 Methane for indoor and outdoor Wi-Fi optional - NEW Boiler code 20189653 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL NOx emission class 6 HEATING EXERCISE Max pressure-temperature bar-°C 3-90 Pump: maximum head available (at a flow rate of 1000 l/h) mbar 340 Expansion tank capacity l 8 HEALTHCARE EXERCISE Max pressure bar 8 DHW production at ?T= 25 °C / 30 °C / 35 °C l/min 14.3/11.9/10.2 Minimum DHW flow l/min 2 DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 35 kgs MYNUTE X YOUR SPACE, YOUR RELAXATION, YOUR COMFORT. WITHOUT COMPROMISES. Beretta presents Mynute X Box , the most compact condensing boiler in its offer and among the most compact on the market. With a depth of only 249 mm (25kw model), Mynute X Box it is ideal for replacement, specifically built-in, even in pre-existing, small-sized boxes. The range is distinguished by the application flexibility, as it can also be installed inside the home and externally (in a partially protected place) . In each type of application envisaged, MYNUTE X BOX ensures the user a uncompromising comfort , both in heating and in DHW, thanks to new primary heat exchanger in stainless steel and to the exchanger optimized plate sanitary ware , in continuity with the renewal process of the Beretta wall platform. The aesthetics, in line with the revisited Beretta style of the latest generation boilers, easily integrates into both indoor and outdoor environments. The wide modulation range 1 : 8 , le very low NOx emissions , which place the range in Class 6 (the best according to European standards), and the provision for operation with mixtures of natural gas and hydrogen - up to a maximum of 20% - confirm Beretta's renewed green awareness, which translates into the development of efficient, high-performance products with a low environmental impact. DIGITAL INTERFACE, MODERN AND INTUITIVE MYNUTE X BOX is equipped with an interface with soft lines, in line with the Beretta aesthetics of the latest generation models, which stands out for its ease of use . Through a modern backlit LCD display , which communicates with the user through icons and scrolling texts (multilingual), you can access all the functions of MYNUTE X BOX. THE 7 silk-screened operating keys they allow you to navigate the panel in a simple and intuitive way, accessing the settings and parameterizations of the boiler and the system. New smoke flange with quick-tightening safety collar Low emissions : class 6 (UNI EN 15502) Modulation 1 : 8 Expansion tank 9 l (30 kW models) Low consumption modulating circulator (EEI = 0.20), with a head curve of 6 metres Excellent silence of operation Degree of electrical protection IPX5D Hydraulic group with Beretta attacks sequence, ideal for replacement Dima in support Complete range of accessories for any type of application , in particular for recessed in boxes. THE specific accessory kit for recessing they are designed to be used in combination with the 'compact magnetic water filter' and 'compact polyphosphate dispenser kit' accessories. Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER UNICAL KON M C24 CONDENSING LOW NOX COMPLETE WITH LPG FUME KIT Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power kW 23.6 Seasonal heating energy efficiency ambient ηs 92% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 12.7kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 4.2kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 96.7% Annual electricity consumption QHE GJ: 40 Heating energy efficiency. of water ηWH: 86% Daily fuel consumption Qfuel : 22.0 kWh Sound power level indoors Lwa dB(A) 51 Annual electricity consumption AEC: 400kWh Domestic hot water specific flow rate (Dt 30 °C): 11.2 l/min DHW production in cont. Dt 25 K (mixed): 13.2 l/min Expansion tank capacity: 8 lt Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345 mm; 36.5kg KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

PLEASE NOTE! THE BOILER WILL BE SUPPLIED WITH METHANE, THE TRANSFORMATION TO LPG WILL TAKE PLACE THROUGH THE SERVICE CENTER FOR FREE! Select the smoke kit in the drop-down menu! Technical features Model : Thematek Condens Power : 28 kW Gas : Methane or LPG Heating efficiency class: A Sanitary efficiency class: A Sanitary load profile XL Maximum pressure at the burner Natural gas G20 (min/max): 2.10/13 mbar Consumption at (min/max) power Natural gas G20: 1.12/2.8 m3/h Maximum pressure at the LPG G30 burner (min/max): 5.3/32.7 mbar Consumption at (min/max) power Natural gas G30: 0.82/2.05 m3/h Dimensions: (HxWxD): 740x410x310 mm; Weight: 34 Kg Connections: gas Ø3/4” heating Ø3/4” sanitary Ø1/2” Thematek Condens The optimal solution for heating and domestic hot water preparation. Excellent value for money, both for new builds and replacements It can be retrofitted into existing heating and hot water supply systems Heat exchanger in stainless steel The Thematek Condens boiler is available in 24 and 28 kW methane power. The most important novelty concerns the renewed primary exchanger , the old one in Al-Si has been replaced by the one in stainless steel which, through a simple adjustment of the gas valve, also allows operation with propane. Innovation also from the point of view of combustion : complete premixing with new fan-push technology where the fan in the new position upstream of the burner guarantees the right ratio between air and gas by applying a proportional pressure value which guarantees the opening of the gas valve without waste. The project has been developed to offer the optimal solution in terms of price , performance and quality . Thematek Condens also presents a new design of the ultra-compact hydraulic block with a new position of the key components, while still maintaining a good level of efficiency, performance and adequate comfort both in heating and in the production of domestic hot water. Characteristics The new design of Thematek Condens offers an innovative touch screen interface of extreme simplicity with 6 keys, display with black background and 2 white digits with flashing on, the boiler status indication is defined by the flashing on of the icon selected. Thematek Condens is compatible with all Hermann Saunier Duval components and accessories already on the market. Thematek Condens can also be combined with the MiGo WiFi control unit. The wall-mounted boiler is ready to be managed remotely simply with a smartphone. Ease of installation SemiaTek Condens is very simple to install thanks to its small size - 62.6cm high, 40cm wide and 27cm deep - and low weight. Even the vertical hydraulic connections have been designed to facilitate and speed up installation. For these reasons, it is the ideal solution for replacing old systems. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

AVAILABLE TO ORDER Hermann Saunier Duval Themafast Condens 25 CS/1 Methane boiler complete with low NOx fume exhaust kit - New Model: Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating Fireplace flow rate Qmin/max - 80/60°C kW 3.1 - 20.4 Sanitary Specific flow rate (∆T = 25K) (EN13203) l/min 14.8 Peak flow rate in 10 minutes (∆T = 30K) l/10 min 123 Dimensions (HxWxD) 740x418x344 ThemaFast Condens All the comfort, immediately. Characterized by a renewed design with modern and essential lines, flat casing to facilitate installation in the home and touch-screen user interface, the new ThemaFast Condens range is positioned at the top of its category in terms of sanitary comfort and consumption reduction . The exclusive Aquaspeed FAST® system and the new 3-litre micro-accumulator ensure immediate delivery of domestic hot water - even in the case of minimal withdrawals - and maximum temperature stability. The new FlameFit® combustion technology is able to autonomously adapt to the different types of gas, always managing to generate perfectly efficient combustion in total safety. The range consists of three models of 25, 30 and 35 kW with methane fuel, convertible to propane through simple electronic regulation. Hydraulic connections and dimensions are unchanged compared to the previous version Superior sanitary comfort New 3 liter microaccumulator Immediate delivery of domestic hot water Maximum temperature stability New FlameFit® combustion technology High modulation up to 1:9 Modern design with touch-screen user interface New diagnostics and malfunction detection Aquaspeed FAST® and new microaccumulator: unique comfort Thanks to the exclusive Aquaspeed FAST ® technology , the domestic hot water is stored in a 3-litre micro-accumulator which guarantees the immediate availability of hot water without the temperature fluctuations typical of the first delivery phase. The new micro-accumulator, made of stainless steel and composite material, is insulated with two expanded polystyrene shells to reduce heat losses in stand-by. Externally, a small resistance (max 25 W) keeps the water always at the desired temperature, avoiding costly multiple ignitions of the burner in case of low flow rate withdrawals. When the withdrawal is greater than 1.7 litres/min, the boiler starts up and, through the instantaneous DHW exchanger, goes into continuous production according to the user's requests. At the end of the withdrawal, the micro-accumulator is already at the set temperature, ready for the next request. FlameFit® technology: more efficiency, less consumption and emissions The innovative FlameFit® combustion technology with which all ThemaFast Condens models are equipped allows the boiler to be independently adapted to the different types and qualities of gas, always guaranteeing optimized and fully safety. In fact, the flame control electrode detects the varied characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting the operation of the boiler to the actual needs of the user, with consequent energy savings, reduction of consumption as well as polluting emissions . FlameFit® technology makes ThemaFast Condens ready for operation with any type of future gas, without the need for conversion kits. New touch screen user interface The interface of the new ThemaFast Condens has a modern digital touch display and has been designed to simplify boiler management by the user as much as possible. The symbology of the various keys and the "talking messages" that can be viewed on the display allow for a rapid understanding of the main functions and how to set parameters according to one's comfort needs. All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Immergas VICTRIX TERA 24 V2 low nox LPG condensing boiler complete with flue gas exhaust kit General characteristics Model: VICTRIX TERA 24 V2 Power supply: LPG Heating Energy Efficiency Class: A Sanitary Energy Efficiency Class: A Sanitary nominal thermal power (useful): 28.0 kW Heating nominal heat output (useful): 24.0 kW Technical data sheet (Method Directive 92/42/EEC) Burner type: Blown air Power at rated load: 24.0 kW Power at 30% of nominal load: 7.2 kW (at 50/30 °C) Efficiency at nominal load: 106.5 Efficiency at 30% of nominal load: 107.5 (at 80/60 °C) Efficiency at nominal load: 97.8 Efficiency at 30% of nominal load: 96.8 Electric auxiliaries at rated load: 41 W at intermediate load: 60 W at zero load: 2 W Operating temperatures Average temperature: 50°C Return temperature: 40°C DHW temperature: 55°C With DHW priority: yes TEST conditions at nominal load Average temperature of the generator: 70 °C Yield correction factor: 0.2 at intermediate load Average temperature of the generator: 70 °C Yield correction factor: 0.2 at zero load Power lost: 54.4W Mantle loss fraction: 0.36 Dimensions Legend: V - Electrical connection G - Gas supply AC - Domestic hot water outlet ACV - Kit domestic hot water inlet solar valve (optional) AF - Domestic hot water inlet SC - Condensate drain (internal diameter minimum Ø 13 mm) M - System delivery R - System return Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. OPERATION WITH LPG THROUGH REGULATION BY THE AUTHORIZED ASSISTANCE CENTER. FOR INFORMATION, CONTACT YOUR LOCAL BAXI ASSISTANCE IN ADVANCE Baxi Luna Duo-tec E 33 Low NOx condensing boiler complete with flue gas exhaust kit for methane or LPG Technical Features Type: Wall-mounted condensing boiler; Model: Luna Duo-Tech Compact E; Energy efficiency class: A; Load Profile: XXL; Power supply: Methane/LPG Gas Adaptive Control; Warm-up Performance: Nominal heating heat output: 28.9 kW; Reduced heat output: 4.8 kW; Useful heat output at rated heat output and high temp. regime* P4: 28 kW; Useful thermal power at 30% nominal thermal power and low temp. mode** P1: 9.4 kW; Minimum operating temperature: -5°C; Expansion vessel capacity: 10 l; Heating circuit water temperature regulation: 25-80°C; Min/max pressure of heating circuit water: 0.5/3 bar; Performance in Healthcare: Nominal domestic hot water heat output: 34 kW; Nominal domestic hot water heat output: 33 kW; Domestic hot water temperature regulation: 35-60 °C; Domestic hot water production ?T 25°C: 18.9 l/min; Minimum water flow rate in the sanitary circuit: 2 l/min; Yields: Useful efficiency at rated thermal power and high temperature regime: 88.1 %; Useful efficiency at 30% rated thermal power and low temperature regime: 98.1 %; Useful efficiency (lvf) Pn - average temperature 70°C: 97.8 %; Useful efficiency (lvf) at 30% - return temperature 30°C: 108.9%; Intermediate useful efficiency (lvf) - average temperature 70°C: 98.2 %; Rated electrical power: 106 W; Auxiliary electricity consumption in stand-by mode: 0.003 kW; Nitrogen oxide emissions NOx: 15 mg/kWh; Sound power level, inside: 53 dB; Dimensions: (HxWxD): 763x450x345 mm; Weight: 39.5 kg; Luna Duo-tec General Features New modern and elegant design for the entire range Wide modulation range up to 1:7 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Digital control panel with large backlit LCD display Predisposition for combination with the Baxi integrated solar system Connection to Ø50 mm rigid and flexible exhaust pipe: solution for chimney restoration - for the 24 kW model Total length 40 meters (intake + exhaust) Hydraulic system Electric three-way diverter valve (also heating only models) Stainless steel premix burner Stainless steel water/fume exchanger Increased sanitary exchanger in stainless steel which allows the boiler to condense even in sanitary operation Electronically variable modulating fan of speed Automatic bypass High efficiency circulation pump with total modulation Anti-lock brake system pump and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Climate control as standard (with external probe available as an option) Provision for connection to a zone system Control system safety thermostat against overtemperatures of the water/flue gas exchanger Hydraulic pressure switch that blocks the gas in case of lack of water NTC safety probe against flue gas overtemperatures Temperature control using NTC probes Total antifreeze device Electronic thermometer Digital pressure gauge heating circuit Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. SO THE TRANSFORMATION KIT IS REQUIRED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE VAILLANT ecoTEC PRO CONDENSING VMW 286/5-3+ COMPLETE WITH FUME EXHAUST KIT -ErP Technical features For heating and domestic hot water production Forced draft sealed chamber Nominal thermal power 24.0 kW ErP energy class (Heating and DHW): Class A DHW nominal heat input 28.6 kW Nominal heat input in heating mode 24.5 kW Water content in the generator 2.2 l Expansion vessel capacity 10 l Domestic hot water production (ΔT = 30K) 13.4 lt Dimensions (hxpxl) mm 720 x 338 x 440 ; 36kg Version: LPG (WITH SPECIAL TRANSFORMATION KIT) General characteristics Vaillant condensing boiler With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. EcoTEC PRO The wall mounted boiler that offers the right balance between performance and comfort. The ecoTEC pro VMW (heating and DHW production) are available in power ratings of 19 and 24 kW. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. Its simplicity of regulation makes it the ideal boiler for all users. ecoTEC pro is equipped with an extremely simple interface with plain text and backlit display. The small dimensions of ecoTEC pro VMW 70cm high, 44cm wide and 35cm deep (identical to the previous version) allow installation in any environment. A new high-efficiency pump and new electronics allow ecoTEC pro to consume very little electricity, guaranteeing considerable savings throughout the year. Instant DHW production Intuitive user interface Simplicity of management ****Efficiency in heating Modulation 1:5 Modulating pump (Class A) Steel primary exchanger 10 l expansion vessel transfer kit from methane to propane or propane air code 0020160884 Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caratteristiche tecniche Modello : Family 30 KIS Codice prodotto : 20187644 Alimentazione : Metano Efficienza energetica Classe di efficienza energetica riscaldamento : A Classe di efficienza energetica sanitario : A Riscaldamento Portata termica nominale : 25,00 kW Potenza termica nominale (80°/60°) : 24,33 kW Potenza termica nominale (50°/30°) : 26,50 kW Sanitario Portata termica nominale : 25,00 kW Potenza termica nominale : 31.50 kW Rendimento di combustione : 97,6%  Performance Pressione massima : 3 bar Vaso d’espansione a membrana : 10 litri Dimensioni e peso Dimensioni (LxHxP) : 470x740x350 mm Peso : 40,0 Kg Caldaia a condensazione Riello Family La sintesi perfetta di performance e sostenibilità La nuova Family è la soluzione Riello per l'utente più esigente. Lo scambiatore primario, interamente realizzato in acciaio inox e con accessibilità frontale alla camera di combustione, garantisce la massima efficienza ed affidabilità nel tempo ed il nuovo scambiatore sanitario ottimizzato assicura un comfort eccezionale e la migliore classe di merito Hibrid Ready FAMILY nasce hybrid ready, in grado cioè di gestire direttamente, senza necessità di accessori aggiuntivi, i componenti di un sistema multi-energia, in modo efficiente ed efficace. Controllo di sistema Il pannello di controllo della nuova gamma FAMILY, attraverso il suo display a colori, semplice e intuitivo, integra ora anche la funzione di gestione diretta di un sistema multi-energia, senza la necessità di controlli esterni accessori. Scambiatore in acciaio inox Scambiatore primario in acciaio inox, con geometria a spira unica avvolta. Massima efficienza e affidabilità. Basse emissioni FAMILY è certificata Classe 6 di NOx, la migliore prevista dagli standard europei Alta efficienza Massimo comfort e minimi consumi, in riscaldamento ed in sanitario. Stabilità dell'acqua calda sanitaria Nuovo scambiatore sanitario a piastre ottimizzato, per performance al top della categoria in termini di efficienza, stabilità della temperatura e tempi di attesa. Installazione semplice e veloce Con FAMILY l’installazione e l’accesso ai componenti sono semplificati per ridurre al minimo tempo e fatica. ACC Combustion FAMILY è caratterizzata dal sistema di controllo di combustione elettronico evoluto, che monitora costantemente la combustione per ottenere consumi ed emissioni sempre ottimizzate. Pannello di controllo con nuova funzione ibrida Con la nuova gamma FAMILY, gestire un sistema ibrido è semplice e intuitivo. Il display di FAMILY, caratterizzato da un’estetica moderna ed elegante, si arricchisce infatti della funzione di gestione di sistema multi-energia. L’intelligenza del sistema ibrido, REC 10CH, integrata nell’elettronica della nuova FAMILY, offre la possibilità di gestire le sorgenti termiche a disposizione attraverso l’interfaccia utente, senza necessità di un pannello di controllo accessorio. Garanzia prodotto :  Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Caldaia Riello Family 35 KIS a condensazione completa di kit scarico fumi low NOx Metano Hybrid Ready - NOVITA RISCALDAMENTO Portata termica nominale kW 30.00 Potenza termica nominale (80°/60°) kW 29.22 Potenza termica nominale (50°/30°) kW 32.07 SANITARIO Portata termica nominale kW 30.00 Potenza termica nominale (*) kW 36.33 Rendimento di combustione % 97,7 CATEGORIA II2H3P Tensione di alimentazione V-Hz 230-50 Grado di protezione IP X5D  ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Vaso d’espansione a membrana l 10 Dimensioni LxPxH mm 470x350x740 Classe energetica Riscaldamento/Sanitario A Family  La nuova gamma FAMILY nasce hybrid-ready, grazie all’intelligenza di sistema REC 10CH integrata nel pannello di controllo di serie. La caldaia è pertanto in grado di gestire in maniera integrata le sorgenti termiche a disposizione, senza necessità di controlli accessori. NON SERVE DECIDERE OGGICon FAMILY è possibile decidere di passare all’ibrido anche in un secondo momento, ampliando il sistema con pompe di calore, pannelli solari e bollitori/accumuli dell’offerta Riello, secondo le indicazioni a catalogo.ENERGY-SAVINGI sistemi ibridi consentono di ridurre i costi della generazione termica e le emissioni dannose in ambiente, grazie all’integrazione delle energie rinnovabili. FAMILY SI RINNOVA. IL TOP DI GAMMA DELL’OFFERTA MURALE RIELLO È IL RISULTATO DI UN NUOVO MODO DI PENSARE L’ENERGIA: EFFICIENTE, IBRIDA, GREEN. RISPETTOSA DELL’AMBIENTE PER IL MASSIMO RISPARMIO ENERGETICO, FAMILY È LA CALDAIA CHE STAVI CERCANDO, PER UN TOTALE COMFORT IN RISCALDAMENTO E IN SANITARIO. HYBRID READYFAMILY nasce hybrid ready, in grado cioè di gestire direttamente, senza necessità di accessori aggiuntivi, i componenti di un sistema multi-energia, in modo efficiente ed efficace.SCAMBIATORE IN ACCIAO INOXScambiatore primario in acciaio inox, con geometria a spira unica avvolta. Massima efficienza e affidabilità.ALTA EFFICIENZAMassimo comfort e minimi consumi, in riscaldamento ed in sanitarioSTABILITÀ DELL’ACQUA CALDA SANITARIANuovo scambiatore sanitario a piastre ottimizzato, per performance al top della categoria in termini di efficienza, stabilità della temperatura e tempi di attesa.INSTALLAZIONE SEMPLICE E VELOCECon FAMILY l’installazione e l’accesso ai componenti sono semplificati per ridurre al minimo tempo e faticaBASSE EMISSIONIFAMILY è certificata Classe 6 di NOx, la migliore prevista dagli standard europei. FAMILY è caratterizzata dal sistema di controllo di combustione elettronico evoluto, che monitora costantemente la combustione per ottenere consumi ed emissioni sempre ottimizzate.PANNELLO DI CONTROLLO CON NUOVA FUNZIONE IBRIDAGrazie all’intelligenza di sistema REC 10CH, integrata nell’elettronica della nuova FAMILY, la caldaia è in grado di gestire un sistema multi-energia, in modo semplice per l’utente e senza necessità di controlli accessori.  Garanzia Prodotto :  Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Caldaia a Condensazione Riello Residence HM 30 KIS Low NOx Con Kit Scarico Fumi Metano o Gpl Caratteristiche tecniche Modello : Residence HM KIS Potenza nominale ERP: 24 kW Alimentazione : Metano/gpl Efficienza energetica Classe di efficienza energetica stagionale del riscaldamento : A Classe di efficienza energetica del sanitario : A Efficienza energetica stagionale del riscaldamento : 93% Potenza termica utile Potenza termica nominale e a regime di alta temperatura : 24,4 kW Potenza termica nominale e a regime di bassa temperatura : 8,2 kW Efficienza Utile Alla potenza termica nominale e a regime di alta temperatura ** ƞ4 % 87,9 Al 30% potenza termica nominale e a regime di bassa temperatura *** ƞ1 % 98,0. Altre specifiche tecniche Portata termica riscaldamento (max-min) kW 25,0- 3,0 Portata termica ACS nominale (max-min) kW 30,0-3,0 Tensione di alimentazione V-Hz 230-50 Grado di protezione IP IPX5D Classe NOx 6  Riscaldamento Pressione-temperatura massima bar-°C 3-90  Pompa: massima prevalenza disponibile(alla portata di 1000 l/h) **** mbar 400 Capacità vaso espansione a menbrana l 9 Dimensioni, peso Dimensioni caldaia (HxPxL) mm 740x275x420  Peso netto kg 30 Residence HM RESIDENCE HM INAUGURA UNA NUOVA GENERAZIONE DI CALDAIE A CONDENSAZIONE, CHE SANCISCE L’IMPEGNO DI RIELLO PER UN’INNOVAZIONE TECNOLOGICA AL SERVIZIO DEL RISPARMIO ENERGETICO E DELLA SOSTENIBILITÀ, OFFRENDO UN COMFORT SEMPRE PIÙ RISPONDENTE ALLE MODERNE ESIGENZE DELL’UTENTE RESIDENCE, tra le gamme più rappresentative dell’offerta Riello in termini di affidabilità e performance, si rinnova profondamente nel design e nella tecnologia per dar vita a RESIDENCE HM. Tante sono le novità di questa nuova caldaia murale a condensazione rispetto alla serie precedente: dall’elevata modulazione 1:10 su tutta la gamma, al nuovo scambiatore di calore in acciaio inox con rinnovato controllo di combustione adattivo, fino al nuovo pannello di controllo touch, per citare le principali.Denominatore comune di tutta la gamma la ricerca tecnologica finalizzata al risparmio energetico per offrire un comfort sempre più elevato: dalla silenziosità alle prestazioni, tante sono le caratteristiche migliorative di RESIDENCE HM, che l’utente non mancherà di apprezzare. La nuova gamma si presenta in una veste estetica completamente rinnovata, dal carattere moderno ed evoluto, che si armonizza con facilità nei diversi contesti residenziali, sia nella sostituzione che nella nuova edilizia. Inoltre come tutte le caldaie Riello di nuova generazione, RESIDENCE HM è orientata al futuro: è infatti predisposta per operare con miscele di gas naturale e idrogeno fino al 20%, contribuendo così a ridurre l’impatto ambientale e le emissioni delle caldaie a condensazione nei prossimi anni. ALTE PRESTAZIONIGrazie all’ampia modulazione 1:10, al nuovo controllo intelligente di combustione ACC e ai rinnovati scambiatori primario e sanitario OTTIMO COMFORT SANITARIOAcqua calda senza oscillazioni ditemperatura, per un comfort ottimale durante i prelievi, con profilo di carico al vertice della categoria.INTERFACCIA TOUCHL’interfaccia di RESIDENCE HM mantiene la semplicità e l’intuitività di utilizzo, innovandosi con una caratterizzante estetica touch. ELEVATA SILENZIOSITÀ RESIDENCE HM si distingue per la silenziosità operativa, che la rende la soluzione ideale per installazione all’interno dell’abitazione. DESIGN COMPATTOLa compattezza, trasversale su tutte le taglie, rende RESIDENCE HM idonea anche per installazione in un pensile. La caldaia è installabile anche a incasso o all’esterno, in luogo parzialmente protetto INSTALLAZIONE E MANUTENZIONE SEMPLIFICATEGrazie al sistema di controllo combustione adattivo ACC, alla compattezza e all’accessibilità frontale ai componenti. TECNOLOGIA AL SERVIZIO DEL COMFORT E DELL’EFFICIENZA ENERGETICA Nuova flangia fumi con collare di sicurezza a rapido serraggio.  Ridotte emissioni di NOx: CLASSE 6 (EN 15502). Ampia modulazione 1:10 su tutta la gamma, per un elevato risparmio energetico. Efficienza stagionale 93%. Nuovo scambiatore in acciaio inox con rinnovato sistema di controllo della combustione ACC Combustion. Vaso di espansione laterale da 9 litri. Scambiatore a piastre ad elevate prestazioni sviluppato da Riello. Nuovo circolatore digitale modulante a basso consumo. Nuovo gruppo idraulico con sequenza di attacchi di tipo DIN, per una sostituzione semplificata. Copertura superiore e mensola inferiore realizzate con nuovi materiali costampati per favorire longevità e resistenza. NUOVO CONTROLLO DI COMBUSTIONE ELETTRONICO ADATTIVORESIDENCE HM è dotata di un nuovo sistema intelligente dicontrollo della combustione ACC (active combustion control), in grado di adattarsi automaticamente al combustibile (metano, GPL, ecc.) senza ricorrere a codici specifici o a kit di trasformazione accessori. Questo innovativo e sofisticato sistema di controllo consente l’auto-regolazione della combustione, eliminando la necessità di taratura iniziale. Il sistema ACC è inoltre in grado di adattare la caldaia ad operare con diverse configurazioni di gas, differenti lunghezze dei tubi e a diverse altitudini (entro i limiti progettuali previsti). Il sistema ACC è in grado inoltre di effettuare autodiagnosi per una combustione sempre sotto controllo, con emissioni costantemente ben inferiori ai limiti imposti dalla normativa. SCAMBIATORE SANITARIO A PIASTRE AD ELEVATE PRESTAZIONILo scambiatore sanitario di RESIDENCE HM “high performance”, sviluppato da Riello, offre un ottimo comfort, unitamente a rapidità di raggiungimento del set point e di stabilità della temperatura durante il prelievo. SILENZIOSITÀ DI FUNZIONAMENTOGrazie anche ai nuovi materiali introdotti, RESIDENCE HM sidistingue per la silenziosità di funzionamento, caratteristica migliorativa (circa il -10%) rispetto alla precedente gamma omonima e particolarmente apprezzabile nel caso di installazione della caldaia all’interno dell’abitazione. Il range di rumorisità si attesta infatti su livelli dai 45 db(A), per il modello 30 KIS, fino a 48 db(A) per il modello 20 IS. FACILITÀ DI INSTALLAZIONE E MANUTENZIONEIl sistema ACC semplifica l’installazione. In fase di accensione la nuova caldaia non necessita di taratura ed è sufficiente selezionare la tipologia di gas combustibile utilizzato dalla caldaia tramite l’interfaccia, se diverso da quello di default (metano). Le dimensioni ridotte e il peso contenuto rendono il prodotto facilmente trasportabile e movimentabile in fase di installazione. L’accessibilità frontale ai componenti rende inoltre il prodotto più semplice da manutenere per il tecnico preposto, velocizzandone i tempi di intervento. INTEGRABILITÀ IN SISTEMI IBRIDIRESIDENCE HM è in grado di integrarsi nei sistemi ibridi Riello multi-energia (gas/ elettricità e rinnovabili), attraverso l’offerta di accessori della piattaforma Hi, Comfort. NUOVA INTERFACCIA DAL DESIGN EVOLUTO E MODERNO RESIDENCE HM è dotata di una nuova interfaccia digitale dal design accattivante, che conferisce a RESIDENCE HM un carattere moderno, in lineacon i canoni estetici attuali. Progettato con una particolare attenzione alla facilità di utilizzo, il pannello di RESIDENCE HM permette di accedere in modo intuitivo a tutte le regolazioni e ai parametri della caldaia e del sistema con un semplice “touch” su sette punti della sua superficie. A conferma dell’operazione avvenuta si genera un “buzzer”, il caratteristico segnale acustico. Anche il display HMI da 2,8’’ è stato concepito all’insegna della semplicità di comunicazione per l’utente, attraverso l’utilizzo di icone che rendono più immediata la comprensione rispetto ai testi. LO SGUARDO AL FUTURO La gamma RESIDENCE HM, come tutte le caldaie Riello di nuova generazione, nasce predisposta per funzionare con miscele di gas naturale e idrogeno - fino a un massimo del 20% - un primo importante contributo verso il processo di decarbonizzazione avviato dall’Unione Europea ROADMAP IDROGENO 100%E c’è di più. Riello punta ora all’utilizzo dell’idrogeno puro come fonte di energia completamente priva di CO2 . Per questo, la nuova gamma RESIDENCE HM è stata testata per operare con la combustione dell’idrogeno al 100% tramite un kit di conversione, al momento in via sviluppo nei nostri laboratori. L’IDROGENO COSTITUISCE IL SISTEMA ENERGETICO SOSTENIBILE DEL FUTURO Disponibilità in enormi quantità Producibilità mediante metodi a basso impatto e in modo sostenibile da fonti rinnovabili, quali l’energia eolica, fotovoltaica e le biomasse Riduzione delle emissioni inquinanti Opportunità di contribuire al processo di decarbonizzazione UNA CALDAIA PER MOLTEPLICI SOLUZIONI LA DISPONIBILITÀ DI UN’AMPIA OFFERTA DI KIT ACCESSORI DEDICATI MOLTIPLICA LE SOLUZIONI IN TERMINI DI APPLICAZIONI INSTALLATIVE DI RESIDENCE HM, UNA CALDAIA VERSATILE, NATA PER RISPONDERE ALLE DIVERSE ESIGENZE IMPIANTISTICHE E DI COMFORT Compattezza, peso ridotto e grado di protezione elettrica IPX5D permettono a RESIDENCE HM di essere installata con facilità non solo all’interno dell’abitazione, ma anche all’esterno (in luogo parzialmente protetto) e a incasso in box. Il prodotto è ideale anche per la sostituzione, favorita dalla disponibilità di kit accessori di conversione, nel caso la caldaia da sostituire non sia Fornita di attacchi DIN Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less