Sime VERA 25 HE condensing boiler Low NOx flue gas kit for LPG - New ErP Vera 25 HE model Heating energy efficiency class A Sanitary energy efficiency class A XL load profile Performance Nominal / minimum heat output (80-60°C) kW 19.8 / 3.8 Nominal heat input in heating kW 20 DHW nominal heat input kW 24 Useful efficiency 30% of the load (40-30°C) % 108.4 Heating sound power dB (A) 54 Electrical protection degree IP X5D Heating expansion vessel capacity l 9 Dimensions HxWxD 700x400x250 VERA HE THE BOILER FOR EVERY TYPE OF SYSTEM Vera HE is the range of premixed wall-mounted condensing boilers that adapt to different system solutions. Thanks to the high head of the circulator, it is perfect for managing radiant floor systems without the use of booster pumps. The compact dimensions make it suitable for replacing existing fixtures and for outdoor or recessed installation using simple accessories. Vera HE features a new single-tube primary exchanger in stainless steel which boasts larger water passage sections compared to market standards, thus offering low pressure drops to the hydraulic system. The single-tube geometry guarantees higher water speeds, preventing deposits and encrustations and furthermore facilitating the cleaning of the exchanger. ACTIVE COMBUSTION CONTROL Vera HE is the range of premixed wall-mounted condensing boilers that adapt to different system solutions. Thanks to the high head of the circulator, it is perfect for managing radiant floor systems without the use of booster pumps. The compact dimensions make it suitable for replacing existing fixtures and for outdoor or recessed installation using simple accessories. Vera HE features a new single-tube primary exchanger in stainless steel which boasts larger water passage sections compared to market standards, thus offering low pressure drops to the hydraulic system. The single-tube geometry guarantees higher water speeds, preventing deposits and encrustations and furthermore facilitating the cleaning of the exchanger. The advanced control electronics check the combustion parameters at all times thanks to the flame sensor electrode and adjust the gas valve accordingly so as to always obtain the right air-gas ratio. The main advantages are: Simple commissioning, high reliability and low maintenance over time Compensation of combustion drifts caused by ageing, oxidation and insulation losses Ease of methane/LPG gas change using a simple parameter Guarantee of minimum polluting emissions guaranteed over time. Characteristics: Exchanger with oversized sections New heat exchanger with oversized water passage sections High head circulator Also suitable for radiant systems Active combustion control With electronic gas valve Three-piece shell For easier maintenance Can be installed externally or recessed Using special accessories or kits Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Fondital ISCHIA KC 24 kW condensing boiler complete with flue gas exhaust kit Low NOx Methane - ErP Energy efficiency class in heating A XL load profile Nominal thermal power (Pnominal) kW 23 Nominal heat input (Qn) kW 23.7 Seasonal space heating energy efficiency (ηs) % 92 Thermal power (50-30°C) kW 24.9 Heating expansion vessel capacity l 9 Specific sanitary flow rate ΔT=30K l/min 13.4 NOx emission class - 6 Supply voltage/frequency V/Hz 230/50 IP electrical protection degree IPX4D Dimensions 400x700x250 Natural gas supply ISCHIA KC Ischia KC is a sealed chamber condensing boiler with forced draft for the production of hot water for heating and the instantaneous production of domestic hot water; PLUS High domestic hot water production, more power during domestic hot water operation (28 - 30 kW) Class 6 of NOx emissions Modulation ratio 1:9 Multifunction relay for connection to systems with zone valves or external pump management or remote alarm signalling 9 liter expansion tank High efficiency modulating circulator with built-in deaerator TECHNICAL FEATURES LCD user interface with diagnostics Management of 2 types of solar thermal system (with additional kit) Thermoregulation with external probe (optional) Compact, only 250 mm deep Arrangement for connection to the Remote Control (optional, supplied by the manufacturer) Programmable parameters to adapt the boiler to the installation and alarm history Automatic by-pass Heat exchanger in thermopolymers and stainless steel 3-speed circulator with built-in deaerator Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER UNICAL KON M C24 CONDENSING LOW NOX COMPLETE WITH LPG FUME KIT Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power kW 23.6 Seasonal heating energy efficiency ambient ηs 92% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C): 12.7kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) η4: 87% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 4.2kW Efficiency at 30% of nominal thermal power in low temperature regime (Tr 30 °C) η1: 96.7% Annual electricity consumption QHE GJ: 40 Heating energy efficiency. of water ηWH: 86% Daily fuel consumption Qfuel : 22.0 kWh Sound power level indoors Lwa dB(A) 51 Annual electricity consumption AEC: 400kWh Domestic hot water specific flow rate (Dt 30 °C): 11.2 l/min DHW production in cont. Dt 25 K (mixed): 13.2 l/min Expansion tank capacity: 8 lt Heating circuit pressure (min-max): 0.5-3.0 bar DHW circuit pressure (min-max): 0.5-6.0 bar IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345mm; 36.5kg KONm the latest generation of domestic condensing boilers by Unical, available in the version: instant combo heating only combinable with DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion The details of konm... Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as to stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to ensure high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility. Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

Sime Praktica 25 HE condensing boiler Low NOx flue gas kit methane - New ErP Nominal thermal power (80-60°C) kW 19.8 Nominal thermal power (50-30°C) kW 21.2 Reduced heat output G20 (80-60°C) kW 3.8 Reduced heat output G20 (50-30°C) kW 4.2 Reduced thermal power G31 (80-60°C) kW 4.3 Reduced thermal power G31 (50-30°C) kW 4.7 Nominal heat input in heating kW 20 DHW nominal heat input kW 24 Reduced heat input G20/G31 kW 4.0/4.5 Useful efficiency min/max (80-60°C) % 95.4/98.8 Useful efficiency min/max (50-30°C) % 105.0/106.1 Useful efficiency 30% of the load (40-30°C) % 108.4 Yield min. of combustion in situ (Presidential Decree 311) % 92.59 ELECTRICAL DATA Power supply voltage/frequency V/Hz 230/50 Electric absorbed power max W 67 Electric power absorbed min W 53 Electrical power absorbed by the system pump W 41 Shutdown losses at 50°C (EN 15502) W 120 Electrical protection degree IP X5D ENERGY PERFORMANCE Seasonal heating energy efficiency class. TO Seasonal heating energy efficiency % ninety two Heating sound power dB (A) 54 Sanitary energy efficiency class A Sanitary energy efficiency % 89 Declared load sanitary profile HEATING PERFORMANCE Heating adjustment range °C 20/80 Boiler water content 5.10 l Max working pressure bar 3 Max operating temperature °C 85 Expansion vessel capacity l 9 HEALTHCARE PERFORMANCE Nominal heat input kW 24 Reduced heat input G20/G31 kW 4/4.5 DHW adjustment range °C 10/60 Specific sanitary flow rate (EN 13203) l/min 11.5 Continuous DHW flow (∆t 25/35°C) l/min 13.8/9.8 DHW flow rate min l/min 2 Sanitary pressure min/max bar 0.5/7.0 Dimensions HxWxD mm 702x400x250 PRAKTICA Premixed condensing gas wall mounted boiler for heating only and instantaneous hot water production Installation type: B23P-B33P-B53P-C13-C33-C43-C53-C63-C83-C93 NOx emission class 6 (EN 15502-1:2015) Microprocessor electronic card with automatic adjustment of ignition power and maximum heating Automatic ignition with flame ionization control Degree of electrical protection to water IP X5D Primary water/fume coil exchanger in AISI 316L stainless steel Sanitary plate heat exchanger in stainless steel Heating system expansion tank Motorized diverter valve Retroactive combustion control with electronic gas valve Fume evacuation fan with electronic speed variation High efficiency system pump with low energy consumption (ErP) By-pass which ensures the circulation of water in the boiler when taps and thermostatic valves are used in the system Safety thermostat against overheating of the primary exchanger Smoke overheating probe 3 bar system safety valve Anti-blocking function of the pump and the diverter valve which activates automatically every 24 hours if there have been no requests for heat Antifreeze function which activates automatically if the water temperature in the boiler falls below the value set at parameter “tS 1.0” and, in the presence of an external probe, if the external temperature drops below the value set in parameter “tS 1.1” Chimney sweep function which lasts 15 minutes and facilitates the task of qualified personnel for measuring parameters and combustion efficiency Control panel equipped with display with numerical code self-diagnosis Knobs for adjusting the heating and domestic hot water temperatures Arrangement for SIME HOME remote control connection (optional) Protection of hydraulic fittings to be placed under the boiler cod. 8094530 (optional) Suitable for operation in a partially protected place according to EN 15502, with a maximum ambient temperature of 60°C and a minimum of -5°C Integrated climatic regulation Manual system loading device and water pressure control manometer Pressure transducer which blocks the boiler in case of water shortage Connections to the system in brass (DIN) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 30 CS/1-5 CFI Article code : 0010022023 Power supply: methane or LPG Performance Heating power : 3.5 ~ 30.0 kW DHW power : 3.5 ~ 30.0 kW Withdrawal flow rate (ΔT = 30K) : 14.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 108.7% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 39.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart, they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water tank. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT THE BAXI AREA ASSISTANCE IN ADVANCE Baxi Luna Duo-tec E 28 Low NOx condensing boiler complete with standard Baxi maGO LPG flue exhaust kit Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input 28.9 kW Nominal heating flow rate 24.7 kW Sanitary nominal thermal power 28 kW Return at 30% % 108.8 Heating circuit water temperature control °C 25-80 Sanitary water temperature adjustment °C 35-60 Sanitary water production ∆T 25°C l/min 16.1 Minimum domestic water flow rate: 2 l/min Minimum operating temperature: -5°C Expansion vessel capacity 8 Degree of protection IPX5D Dimensions (hxwxd) mm 763 x 450 x 345 Power supply: LPG Luna Duo-tec General characteristics New modern and elegant design for the whole range Wide modulation range up to 1:7 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Digital control panel with large backlit LCD display Arrangement for combination with the Baxi integrated solar system Connection to rigid and flexible Ø50 mm exhaust pipe: solution for restoring flues - for mod. 24 kW total length 40 meters (intake + exhaust) hydraulic system Electric three-way diverter valve (also heating only models) Pre-mix burner in stainless steel Stainless steel water/fumes exchanger Increased DHW exchanger in stainless steel which allows the boiler to condense as well in sanitary operation Modulating fan with electronic variation of speed Automatic by-pass High efficiency circulation pump full modulation Pump anti-blocking system and three-way valve which occurs every 24 hours Heating circuit safety valve at 3 bar Thermoregulation system Standard climate control (with external probe optionally available) Preparation for connection to a zone system Control system safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch that blocks the gas in case of lack of water NTC safety probe against smoke overtemperatures Temperature control using NTC probes Total antifreeze device Electronic thermometer Heating circuit digital pressure gauge Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

THE BOILER IS BORN WITH METHANE. THEREFORE, YOU MUST REQUEST THE TRANSFORMATION KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Technical features Model : ecoTEC Intro VMW 24/28 AS/1-1 Article code : 0010026088 Power supply: LPG Performance Heating power : 6.9 ~ 23.9 kW Nominal heat input in DHW : 6.9 ~ 28.0 kW Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at 30% : 108.2% Domestic hot water production (ΔT = 30K): 13.4 l/min Domestic hot water temperature adjustment: 35°C ~ 60°C Modulation : 1:4 Expansion vessel pre-charge pressure: 0.75 bar Minimum water pressure: 0.3 bar Total electric power: 90 W Expansion vessel capacity: 8 litres Dimensions and weight Dimensions (HxWxD): 626x400x270 mm Weight : 25.6Kg Warranty extension to 7 years ecoTEC Intro VMW wall-mounted condensing boiler The most compact and lightest, now also for outdoor use The new ecoTEC intro VMW condensing boilers (for heating and domestic hot water production) are available in 24 and 28 kW power ratings, increasing the range of product choices within the consolidated range of Vaillant condensing boilers. In fact, this product gives new users the opportunity to approach the world of condensing boilers offered by Vaillant, without incurring excessive costs for replacing the old boiler. ecoTEC intro maintains the focus on energy saving by mounting a high-efficiency modulating pump that minimizes annual electricity consumption , with a consequent positive impact on bills. Also with regard to gas savings, Vaillant offers the new combustion technology , called fan push, where it is the fan which, thanks to the different levels of pressure exerted on the gas valve, guarantees the right ratio between combustion air and gas. The ecoTEC intro case is simple and essential, the dimensions appear to be extremely small which however do not affect or reduce the quality and efficiency of the product, guaranteed by Vaillant. The front panel introduces an innovative , extremely simple touch screen interface with 6 keys, black background display and 2 white digits with intermittent switching on. An additional e-bus connector has been added to the bottom of the boiler which allows connection to Vaillant temperature control units and thermostats. These wall mounted boilers are very simple to install thanks to their dimensions (62.6cm high, 40cm wide and 27cm deep) and low weight (about 26kg): these features make them ideal whenever replacement is required. All the components that are present in the product comply with the ErP energy efficiency regulations, a guideline also embraced by Vaillant, as a brand sensitive to environmental issues. This is all that the new ecoTEC intro can offer, in addition to a competitive price which does not affect performance. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-hung condensing boilers. ecoTEC wall mounted boiler intro Electricity consumption in standby less than 2W Innovative touch screen display Sanitary comfort even with low flow rates Low installation costs Small size Exchanger in stainless steel Pneumatic combustion system with complete pre-mixing Vertical hydraulic connections 1:4 modulation Instant DHW production 8 liter expansion vessel Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Sime Praktica 30 HE condensing boiler Low NOx flue gas kit methane - New ErP Nominal thermal power (80-60°C) kW 23.7 Nominal thermal power (50-30°C) kW 25.7 Reduced thermal power G20 (80-60°C) kW 4.5 Reduced thermal power G20 (50-30°C) kW 5.1 Reduced thermal power G31 (80-60°C) kW 4.5 Reduced thermal power G31 (50-30°C) kW 5.1 Nominal heat input in heating kW 24 DHW nominal heat input kW 30 Reduced heat input G20/G31 kW 4.8 Useful efficiency min/max (80-60°C) %94.3/98.7 Useful efficiency min/max (50-30°C) % 105.5/107.1 Useful efficiency 30% of the load (40-30°C) % 108.5 Yield min. of combustion in situ (Presidential Decree 311) % 92.74 ELECTRICAL DATA Power supply voltage/frequency V/Hz 230/50 Electric absorbed power max W 73 Electric power absorbed min W 54 Electrical power absorbed by the system pump W 41 Shutdown losses at 50°C (EN 15502) W 120 Electrical protection degree IP X5D ENERGY PERFORMANCE Seasonal heating energy efficiency class. TO Seasonal heating energy efficiency %93 Heating sound power dB (A) 58 Sanitary energy efficiency class A Sanitary energy efficiency % 84 Declared load health profile XL HEATING PERFORMANCE Heating adjustment range °C 20/80 Boiler water content 5.10 l Max working pressure bar 3 Max operating temperature °C 85 Expansion vessel capacity l 9 HEALTHCARE PERFORMANCE Nominal heat input kW 30 Reduced heat input G20/G31 kW 4.8 DHW adjustment range °C 10/60 Specific sanitary flow rate (EN 13203) l/min 13.5 Continuous DHW flow (∆t 25/35°C) l/min 16.7/11.9 DHW flow rate min l/min 2 Sanitary pressure min/max bar 0.5/7.0 Dimensions HxWxD mm 702x400x250 PRAKTICA Premixed condensing gas wall mounted boiler for heating only and instantaneous hot water production Installation type: B23P-B33P-B53P-C13-C33-C43-C53-C63-C83-C93 NOx emission class 6 (EN 15502-1:2015) Microprocessor electronic card with automatic adjustment of ignition power and maximum heating Automatic ignition with flame ionization control Degree of electrical protection to water IP X5D Primary water/fume coil exchanger in AISI 316L stainless steel Sanitary plate heat exchanger in stainless steel Heating system expansion tank Motorized diverter valve Retroactive combustion control with electronic gas valve Fume evacuation fan with electronic speed variation High efficiency system pump with low energy consumption (ErP) By-pass which ensures the circulation of water in the boiler when taps and thermostatic valves are used in the system Safety thermostat against overheating of the primary exchanger Smoke overheating probe 3 bar system safety valve Anti-blocking function of the pump and the diverter valve which activates automatically every 24 hours if there have been no requests for heat Antifreeze function which activates automatically if the water temperature in the boiler falls below the value set at parameter “tS 1.0” and, in the presence of an external probe, if the external temperature drops below the value set in parameter “tS 1.1” Chimney sweep function which lasts 15 minutes and facilitates the task of qualified personnel for measuring parameters and combustion efficiency Control panel equipped with display with numerical code self-diagnosis Knobs for adjusting the heating and domestic hot water temperatures Arrangement for SIME HOME remote control connection (optional) Protection of hydraulic fittings to be placed under the boiler cod. 8094530 (optional) Suitable for operation in a partially protected place according to EN 15502, with a maximum ambient temperature of 60°C and a minimum of -5°C Integrated climatic regulation Manual system loading device and water pressure control manometer Pressure transducer which blocks the boiler in case of water shortage Connections to the system in brass (DIN) Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA ASSISTANCE SERVICE IN ADVANCE JUNKERS BOSCH CERAPUR BUILT-IN CONDENSING BOILER ZWB 28-1 EI 24 kW INCLUDING FUME KIT - NEW ErP ErP energy class (Heating and DHW) For heating and domestic hot water production DHW nominal heat input kW 28 Nominal heat output (heating) 40/30 °C: 25.7 kW Nominal heat output (heating) 80/60 °C: 24.0 kW Minimum heat input (sanitary): 7.4 kW Sanitary flow rate ΔT = 30 K: 13.4 l/min NOx class: 5 Voltage v(AC): 230 HZ frequency: 50 Absorbed electric power: 230 W IP Protection Degree: X5D Dimensions: 243 x 533 x 775; 47 kgs Standard: Controllable from home - Management of the boiler directly from inside the home, using the TF 25 remote control , supplied as standard Junkers Bosch With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP Directive (energy related products) which specifies the minimum eco-design requirements for equipment that uses energy, including energy efficiency. The world of heating will also be affected by this revolutionary change. In fact, from 2015 the energy efficiency of boilers will be based on new performance indexes that will take into account seasonal performance. Among the most significant changes to the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation also at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the level of efficiency calculated over an entire year. CerapurRecessed CERAPUR INCASSO is designed for concealed installations and encloses maximum comfort in just 250 mm of depth. Ideal for solving space problems, it does not alter the aesthetic beauty of homes. In fact, CERAPUR INCASSO integrates perfectly into the façade thanks also to the possibility of painting the "shell" with the same color as the wall. Boiler for concealed installations - Space saving inside the home and no aesthetic impact on the outside thanks to the installation in the niche in the wall Controllable from inside the house - Management of the boiler directly from inside the house, using the TF 25 remote control, supplied as standard Robust and reliable - Robustness and reliability of the boiler are guaranteed thanks to the aluminum alloy construction of the primary exchanger Electrical insulation - The boiler has an IPX5D degree of electrical insulation Characteristics: Wall-mounted condensing boilers for outdoor use with DHW production that can be combined with solar thermal systems for DHW using the Solar Kit. C13, C33, C63, C83, B33 type certifications obtained. Suitable for use with Ø 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation indicated in a special niche, dedicated to the built-in Guscio (acc. 978). Automatic antifreeze function up to an external temperature of -15 °C, both on the DHW and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW and heating). Patented high efficiency silicon-aluminum alloy primary heat exchanger. Oversized sanitary plate heat exchanger for condensing also in DHW. Heating side expansion vessel of 6 litres. Circulator in Energy Class A. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NEW EXCLUSIVE EXCLUSIVE, A NEW STORY BEGINS. Through the innovative ACC electronic injection combustion, HYBRID READY integration and the new project design, EXCLUSIVE offers exclusive advantages in every installation variation. From the new EXCLUSIVE, A NEW STORY BEGINS. construction, redevelopment; from hybrid application in a multi-energy system to simple single installation, EXCLUSIVE represents the current and winning choice for those who are not satisfied and want to look beyond. Characteristics: Electronic injection combustion via ACC system EXCLUSIVE plus only the BeSMART Wi-Fi Comfort Control (optional) forms a class A+ system 94% (ETAs) of energy efficiency in heating Universal installation : Indoor, outdoor and recessed installation. IPX5D electrical protection degree Tempozero installation: Removing the casing NO longer necessary for electrical connections and calibration Low consumption modulating circulator (EEI≤ 0.20) 6 m head, electronically modifiable up to 7 m Hydraulic connections and external probe available as options Frost protection down to -5 °C as standard HYBRID READY boiler , Can be integrated via BUS in a multi-energy system to make boiler operation more effective in relation to other energy sources (can be combined with a Beretta hybrid system using the REC 10H interface available as an accessory) Talking display: User interface for direct communication using TEXT and ICONS Self-adapting: The boiler automatically adapts to different types of gas and installation - ZERO calibrations CO alarm Boiler CO level constantly monitored and calibrated for maximum safety Small size: Thanks to its compactness, EXCLUSIVE can also be easily installed in a wall unit LPG version selectable from parameter Gas transformation kit not necessary Europe strategy With the opening towards the management of multi-energy plants, the reduction of emissions and the optimization of consumption, Beretta signs with EXCLUSIVE the highest contribution in terms of respect for the environment, in view of the 20-20-20 objectives of the Union countries expected by 2020, reconfirming their commitment to an increasingly eco-sustainable future.        Exclusive: a milestone in the evolution of Beretta Combustion and electronics, i.e. the heart and brain of EXCLUSIVE, entirely designed in the Research and Development Laboratories of the historic Lecco headquarters, mark a turning point in Beretta's mural evolution and are the result of the spirit of innovation that has distinguished the brand since its origins. With EXCLUSIVE, the novelty of the project fits perfectly into the tradition of know-how and takes on a linear design, which reworks some aesthetic lines of the first boiler models in a modern key, in perfect continuity of style. Continuity that is also manifested in the re-proposition of the EXCLUSIVE name, which has always characterized the top of the Beretta range, with exclusive features and advantages. Class A+ system using only the BeSMART WiFi Comfort Control (optional) .   "talking" interface The control panel is one of the distinctive elements of EXCLUSIVE which confirms its innovative profile. In fact, there are many EXCLUSIVE functions, all to be discovered, through a modern 3.5” backlit LCD display, which communicates with the user through texts and icons. By means of the intuitive silk-screened operating keys it is also possible to access the settings and parameterizations of the boiler and the system. GREEN GEM OF EXCLUSIVE: LED light bar that signals the current operating status of the boiler, reflecting on the casing even with the door closed.   Exclusive Features: HOURLY PROGRAMMING : Programmable heating by hour and by single zone INTELLIGENT SYSTEM FILLING Autonomous filling activation and total safety SYSTEM PRESSURE Displayed DATE AND TIME Display as screensaver PREHEATING Domestic hot water preheating activation SCHEDULED MAINTENANCE Intelligent system that warns the user when boiler maintenance is due   Everywhere Exclusive: Thanks to BeSMART, Beretta's WiFi Comfort Control, controlling and managing home comfort is now possible wherever you are, through a simple and intuitive App, via smartphone and tablet. EXCLUSIVE is compatible with all BeSMART functions, even the most advanced. From home heating professionals, easy management of home comfort. Even away from home   Electronic injection combustion The ACC system, designed and developed by Beretta, allows in all circumstances to offer "first class" functionality, efficiency and low emissions. Using a sensor for detecting the flame ionisation current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values ​​over the entire modulation range of the delivered power. Thanks to the ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded. [A] Cylindrical burner in stainless steel [B] Integrated electronic board [C] Traditional ga valve with modulator [D] Modulating fan with Hall effect     Hybrid Ready EXCLUSIVE is a HYBRID READY solution. The boiler was born as a fundamental element of the offer of HYBRID READY products, which constitute the new hybrid technology system conceived and developed in the Beretta Research Laboratories. This system, created to meet the current and future needs of integration and governance of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. EXCLUSIVE, AS A HYBRID READY SOLUTION, IS THE IDEAL CHOICE FOR THOSE WHO WANT TO LOOK AHEAD AND INVEST IN A PRODUCT WHICH WILL MAINTAIN ITS ITS VALUE UNCHANGED OVER TIME. Thanks to the new communication BUS with which it is equipped, EXCLUSIVE is able to interact perfectly with the Energy Manager REC 10H, a real thinking brain that constantly monitors the hybrid system created, to always offer the best comfort in an efficient and effective way. The Beretta hybrid, distinguishing itself for its modular approach to the world of multi-energies, is therefore able to offer increasingly tailored comfort and to evolve over time, with the inclusion of new components that increase efficiency   Beretta is “ERP”. The concrete commitment towards an eco-sustainable future   The acronym ErP, acronym of "Energy related Products" (Products connected to the use of energy), identifies the Directive 2009/125/EC aimed at reducing the energy consumption of products through eco-compatible design. Starting from 26 September 2015 , the date of its effective entry into force in the European Union, it will mark an epochal turning point for heating products and the production of domestic hot water. On that date, other regulations simultaneously issued for the energy labeling of products will also become effective in addition to the corresponding Directive 2010/30/EU.  The regulation provides that all products intended for heating and for the production of domestic hot water with a nominal thermal power lower than or equal to 70 kW can only be placed on the market with an energy label that highlights the efficiency class * . Different energy efficiency labels have been provided based on the different types of appliances/technologies, but all have the same graduated color scale that identifies the various levels of efficiency at a glance. The purpose of the labels is to give the consumer the possibility to easily identify the level of efficiency of a product and to be able to make a homogeneous comparison between products that use different technologies. For products whose transformation efficiency is influenced by external conditions, such as heat pumps, the efficiency data is reported by climatic bands.   In addition to the product labels, the European regulation has provided for the creation of a system label in case systems are created with different appliances, components and related controls. This second type of labeling, thanks to the virtuous synergy between the different elements, will make it possible to create systems capable of reaching levels of efficiency even higher than those of the individual devices. Also starting from the same date, new seasonal efficiency limits will be triggered for products intended for heating and combined. These for products with a nominal thermal power equal to or less than 400kW, will prevent less efficient products from being placed on the market. The obligation to comply with minimum heat loss limits will also apply to DHW tanks. For primary water tanks, these will be subject to compliance with an energy classification based on heat dispersion. For sanitary accumulations, up to 500 liters there will be a labeling obligation, from 500 to 2000 liters will be bound to compliance with the energy classification. For heat pumps for heating and mixed appliances, in addition to the seasonal efficiency limits, there will be specific noise emission limits for power sizes. Even water heaters, whether gas, heat pump or solar, in order to be placed on the market, in addition to energy labelling, will have to comply with a series of requirements in terms of efficiency.   Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

RINNAI condensing boiler ZEN 29 kW Low NOx Integrated Wi-Fi Integrated Condensate Neutralizer cod. REB-KBI2929FF-LPG LPG Complete with Smoke Kit Code REB-KBI2929FF-NG Heating energy efficiency class A Profile / Domestic hot water energy class XL / A Noise level indoors (dB) 44 Performance Nominal heat input on PCI Heating (kW) 29.0 Qnw Nominal heat input on Sanitary PCI (kW) 29.0 NOx class 6 Maximum electric power absorbed in heating (W) 100 Degree of protection IPX5D Expansion vessel content (l) 7.5 Domestic hot water delivery (∆T=35°C) (l/min) 11.6 Dimensions Dimensions (W x H x D) (mm) - Empty weight (kg) 440x660x285 - 33 ZEN Zen is the new 100% Rinnai domestic condensing boiler , with WiFi chronothermostat as standard. Thanks to the "My Rinnai" APP, using and monitoring the generator is very simple: just one click to set the temperature, check consumption and change the programming for unexpected changes in plans, such as a last-minute evening with friends. Performing on any type of system, range rated and full condensing, Zen is the perfect Rinnai solution for domestic comfort. Small in size and big in performance, Zen is easy to install and guarantees a low environmental impact. The heart of the boiler has extraordinary performances The metal fiber burner is ultra low NOx, with values ​​that satisfy the most restrictive European regulations: Zen reaches the best class of merit (Class 6) for its low environmental impact and is positioned as the most eco-sustainable product in its category. The 100% Rinnai heat exchanger is made of stainless steel, completely recyclable, designed to ensure complete condensation and last over time. Innovative earthquake safety sensor In the event of medium or high intensity seismic events (increasingly frequent also in our country) the boiler automatically isolates itself from the gas system, limiting the risk of leaks, explosions or fires, which can make the affected environment even more dangerous. earthquake. Can also be installed outdoors Zen is IPX5D certified and features the standard antifreeze kit up to -20°C. Thanks to these characteristics, it can also be installed outdoors without the need for additional protection. Integrated condensate neutraliser The Zen series features the condensate siphon integrated inside the generator, already added with granulate and immediately ready for use. This allows you to simplify installation, always, even when replacing a traditional high temperature generator. The integrated neutraliser, in fact, allows the acidity of the condensate to be eliminated (water with an acid pH produced by the normal operation of the boiler, corrosive for the pipes) without having to face the costs of purchasing and maintaining an external accessory which performs this function. otherwise essential. Integrated climatic probe The integrated climatic probe is a standard of Rinnai heat generators: the internal positioning allows you, who use it and you who install it, to avoid masonry work and electrical connections. Thanks to this sensor, you can forget about regulating the temperature in your home and let the generator take care of everything, intelligently adjusting its operation according to the weather, more or less cold. So while the boiler operates in climatic regulation with sliding temperature, you can enjoy a perfect balance between comfort and savings, and no worries. Wi-Fi as standard Zen offers the standard Wi-Fi chronothermostat (which can also be installed in a room other than that of the generator) to manage and control the boiler anytime, anywhere, in complete freedom. Consumption reports, weekly programming, modification of settings and management of multiple boilers (such as one's own and that of elderly parents, or the house in the mountains) from the same "My Rinnai" APP, available for Android and iOS smartphones. All this and much more to offer you totally smart management. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Technical features Model : Victrix Tera 28 V2 Product code : 3.032928GPL Power supply: LPG Energy efficiency specifications according to European ErP directive ACS energy efficiency class: A Heating energy efficiency class: A Load profile: XL Performance ACS thermal capacity: 32.7 kW Heating heat output: 28.6 kW ACS useful power: 32.0 kW Useful heating power: 28.0 kW Useful thermal efficiency (80 ~ 60 °C) : 97.8% Useful thermal efficiency (40 ~ 30 °C) : 107.2% Adjustable domestic hot water temperature: 30° ~ 60° C Adjustable heating temperature: 20° ~ 85° C Specific flow rate in continuous service of sanitary water (∆t 30 °C): 16.5 l/min Minimum pressure of the sanitary circuit: 0.3 bar NOx emissions: 6 Expansion vessel capacity: 10 litres Electrical protection degree: IPX5D Dimensions and weight Dimensions (LxHxD): 440x748x253 mm Weight: 33.4 Kg Immergas Victrix Tera V2 boiler Wall-mounted and built-in condensing boiler, instantaneous The VICTRIX TERA range of condensing boilers is renewed with a step forward in technology and design . The aesthetics are now more refined in detail, it can also work with 20% hydrogen mixtures and the seasonal efficiency rises to 94% for higher efficiency. There are several technical elements that enhance the performance of the TERA V2 versions starting with the new very high efficiency exchanger in stainless steel which increases the seasonal efficiency and allows to reach the A+ classification when the boiler is associated with advanced thermoregulation. The TERA range is already known for its considerable installation flexibility thanks to its small overall dimensions: it can in fact be placed inside homes, outside in partially protected places or built-in or in technical cabinets even in hybrid configurations. There are two instantaneous versions of 24 and 28 kW, one of 24 kW for heating only which can be combined with domestic boilers of various capacities. The new range allows the recovery of old chimneys with particularly small diameters and, thanks to the safety devices provided and with the help of a specific optional kit, it can be connected to collective flues designed by professionals in positive pressure. The VICTRIX TERA V2 boilers fall into class 6 , the most ecological in the European classification, for low emissions of nitrogen oxides. Maximum flexibility VICTRIX TERA V2 boilers have obtained the Hydrogen Ready certification . The new VICTRIX TERA V2 can now operate on methane, LPG, propane air and a mixture of up to 20% hydrogen . Hydrogen The solution to reduce CO 2 and greenhouse gas emissions in the environment While natural gas emits carbon dioxide into the atmosphere when burned in a boiler, hydrogen does not. Since the heating industry is responsible for the majority of carbon emissions, this new technology could be a key weapon in the fight to achieve net-zero carbon emissions. To give an idea of ​​the environmental benefits, consider that the introduction of the 20% hydrogen blend worldwide would save about 6 million tons of carbon dioxide emissions per year and reduce greenhouse gases by 7% . If the boilers were completely fueled by hydrogen the results would be extraordinary. Stainless steel primary exchanger Highly efficient condensation module made with a single-tube stainless steel exchange coil. The absence of manifolds and parallel circuits guarantees maximum reliability over time: there are no welds. The single stainless steel spiral without constriction allows for a perfectly balanced hydraulic circuit, significantly reducing load losses . The large and constant internal section allows for limited deposits, reducing the risk of clogging in the event of impurities in the water . New aesthetics White dashboard aesthetic cover with grey border and glossy user interface, glass effect, equipped with buttons for making adjustments and central display for viewing the boiler operating parameters. Silver grey silkscreens and symbols. The lower grille for covering the connections is standard New technical solutions highlighted The new TERA V2 range allows for large flue gas exhaust extensions, all 24 kW models can be installed up to 20 m of flexible ducting ø 50, the 28 kW models reach 15 metres. Furthermore, thanks to the clapet valve kit, installation in collective flues in positive pressure is permitted. Remote control VICTRIX TERA V2 can be connected to CAR V2 , CAR V2 WIRELESS, CRD PLUS or MINI CRD, modulating chronothermostats that allow you to control the boiler comfortably from inside the home. The SMARTECH PLUS wireless chronothermostat with Bluetooth technology is also available: it allows you to adjust the heating temperature even with a smartphone through a dedicated app. Combination with solar systems In the case of integration with solar systems, the wide modulation range guarantees maximum sanitary comfort even with pre-heated incoming water. In the instantaneous versions, the solar function inhibits the ignition of the circulator and burner for a time equal to the sanitary delay value set in the parameters. This function is even more efficient with the aid of the solar inlet probe kit that allows the detection of the temperature of the water entering the boiler, coming from a solar boiler. If this temperature is equal to or higher than that set on the selector, the burner and the circulator are kept off for the entire duration of the withdrawal. Product Warranty : The warranty on this item is 24 months from the date of purchase.

Read more less