ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N006M Item code : 401473 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 5.9 kW Electrical power consumption: 2.08 kW EER : 2.84 ESEER : 4.32 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 5.9 kW EER : 2.88 ESEER : 4.56 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 6.36 kW Absorbed electrical power: 2.03 kW COP : 3.13 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 6.37 kW COP : 3.19 Class : B Energy Efficiency in Cooling SEER : 4.44 Efficiency ηs : 175 % Energy Efficiency in Low Temperature Heating PDesign : 4.8 kW SCOP : 3.89 Efficiency ηs : 153 % Seasonal efficiency class: A++ Energy Efficiency in Medium Temperature Heating PDesign : 5.32 kW SCOP : 3.12 Efficiency ηs : 122 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 0.28 m3 /h Pump useful head: 39.8 kPa Sound power level: 65 dB(A) Sound pressure: 51 dB(A) Heating Exchanger water flow rate: 0.31 m3 /h Pump useful head: 35.4 kPa Sound power level: 65 dB(A) Sound pressure: 51 dB(A) Electrical Data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 900x370x940 mm Empty weight: 85.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with closed-cell neoprene anti-condensation mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : a-LIFE3 202 Power supply (V/Hz/n°) : 230/50/1 White color Indoor Unit Power: 4.7 kW Number of Pipes : 2 NB : The control is not included in the package, it is available as an accessory. General characteristics The a-LIFE3 fan coil is designed to adapt to any environment thanks to a modern and discreet design that concentrates all the experience and know-how of Mitsubishi Electric Hydronic & IT Cooling Systems SPA in this family of products. Double suction centrifugal fan unit and 6 selectable speed autotransformer. Thanks to the availability of various versions, cabinet or built-in, with front or bottom air intake, for horizontal and vertical installations, it is easy to identify the optimal solution for every need. ClimaVeneta Fancoil a-LIFE3-2T-DLMV-102 for professional applications of 1.41 kW in the 2-pipe version with cabinet, with lower air intake, for vertical installation. This fan coil unit is equipped with a centrifugal-type fan assembly with double suction and forward-facing blades with 3 speeds. The left hydraulic connections are easily convertible into right connections with a simple rotation of the exchanger. The class G2 air filter is fitted on all models, whose cover is in galvanized and pre-painted sheet metal. Characteristics Centrifugal type fan unit with double intake to ensure the best performance with the lowest noise level. Directly coupled multi-speed electric motor 6-speed autotransformer Coil with corrugated aluminum fins and copper tubes. Coil with large frontal surface which allows to reach high air flows with very low pressure drops. Hydraulic connections on the left, easily convertible into connections on the right with a simple rotation of the exchanger. Auxiliary condensate collection tray with thermal insulation, in galvanized sheet metal, for all horizontal versions. Auxiliary condensate collection tray in plastic material, for all versions. Configurations for 2 and 4 pipe systems. Air filter on all models. Automatic closing of the control door and protection of the electric controls from possible water falls (compliant with directive CEI EN 60335-2-40). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical features Model : i-BX-N013T Article code : 401478 Command on board included Cooling down External air temperature 35°C - Water temperature 7°C Cooling capacity: 12.8 kW Absorbed electrical power: 4.54 kW EER: 2.82 ESEER: 4.49 Values ​​referred to the EN14511 standard External air temperature 35°C - Water temperature 7°C Cooling capacity: 12.8 kW EER: 2.84 ESEER: 4.58 Class : C Heating External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 14.7 kW Absorbed electrical power: 4.55 kW COP: 3.23 Values ​​referred to the EN14511 standard External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 14.7 kW COP: 3.24 Class : A Energy efficiency in cooling SEER : 4.65 Efficiency ηs : 183 % Energy efficiency in low temperature heating PDesign : 10.9 kW SCOP : 3.99 Efficiency ηs : 157 % Seasonal efficiency class: A++ Energy efficiency in medium temperature heating PDesign : 11.42 kW SCOP: 3.01 Efficiency ηs : 117 % Seasonal efficiency class : A+ Performance Cooling down Exchanger water flow rate: 0.61 m 3 /h Available pump head: 53 kPa Sound power level : 70 dB(A) Sound pressure : 55 dB(A) Heating Exchanger water flow rate: 0.71 m 3 /h Available pump head: 47.1 kPa Sound power level : 70 dB(A) Sound pressure : 55 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R-410 Operating limits Heating External air temperature : -20°C ~ 45°C Introduced water temperature : 24°C~ 60°C Cooling down External air temperature : -10°C ~ 46°C Introduced water temperature : -8°C ~ 20°C Dimensions and weight Dimensions (LxWxH): 900x420x1390 mm Empty weight: 135.0 kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single circuit configuration using R410A refrigerant, air side exchange coil with copper pipes and aluminum fins, water side heat exchanger with brazed plates. The unit is equipped with an electronic expansion valve and built-in hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to the accurate thermoregulation combined with the use of inverter technology. The accurate design and the use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are regulated synergistically according to proprietary logics to maximize unit efficiency. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology which guarantees the exact energy in correspondence with the real needs of the building. High efficiency which translates into reduced energy consumption throughout the unit's working period. Comfort applications Residential buildings Business premises Infrastructure for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems that can be created with cascade systems ErP Ready i-BX-N thanks to the inverter technology complies with the ErP directive, exceeding the minimum requirements for seasonal energy efficiency in heating, SCOP, both for low temperature and medium temperature applications Silent operation : Noise emissions are reduced thanks to the modulation of the frequency of the compressor and the speed of the fan Reduced consumption : The dynamic control of the water delivery temperature according to the outside air temperature greatly increases the comfort and energy efficiency of the system Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages hot water production via a 3-way valve to be installed outside the unit Ease of installation : The i-BX-N heat pumps are of the "packaged" monobloc type which are particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the typical procedures of direct expansion air conditioning systems Intelligent management of your system Nadisystem guarantees centralized regulation of the system, ensuring: Easy communication between the different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on the availability, yields and costs of their use, always preferring renewable sources. The auxiliary sources are activated to meet the building's needs at low outside temperatures by integrating the thermal power of the heat pump System customization Nadisystem has various special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of system with different water temperature levels. Cascade management of units If the heat requirements are high, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure consisting of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with stepless speed regulation that improve the air distribution obtaining low consumption and minimizing the sound level Drums Condenser with copper tubes and aluminum fins Standard coil protection grids up to size 015 Control Keyboard with LCD display and electronic adjustment via menu NADI Compact Functional keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM control Setting of the water set point with fixed or dynamic value with Climatic Curve. Antifreeze protection according to water temperature and outside air temperature. Domestic hot water production. 4 Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade system management If the heat requirements are high, it is possible to connect up to 4 units of the same power in cascade Managed in master-slave mode, with the master unit in charge of processing the information and then transmitting it to the slave units High degree of partialisation of the supplied power, without reducing performance, and precise sizing of the system Possibility of dedicating just one or all the units to the production of domestic hot water. Integrated hydronic unit All plumbing components for installation are already included with no increase in unit size. EC pump, brushless motor with electronic switching to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, unassembled but supplied with the unit Evaporator Brazed plate heat exchanger in AISI 316 steel, externally lined with anti-condensation mat in closed cell neoprene (CFC and HCFC-free). Thermostatic electric resistance to protect against the formation of ice inside. Low pressure drops and optimized heat exchange Refrigerant circuit Standard electronic expansion valve Optimized coolant flow Precise and effective temperature control Fast regulation and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special antifreeze function Dedicated algorithms avoid the formation of ice inside by managing the operation Of the electrical resistance on the plate heat exchanger. Of the pump according to the outside air temperature. Of the flow switch in case of no flow The unit is also set up to operate, with brine mixtures, down to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water tank probe and inertial tank probe Copper-Aluminium type batteries with epoxy painting Copper-Copper type batteries Hydraulic separator Domestic hot water storage Antifreeze electric heater on base and for auxiliary condensate drain pan RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical features Model : i-BX-N013M Article code : 401476 Command on board included Cooling down External air temperature 35°C - Water temperature 7°C Cooling power: 12.4 kW Absorbed electrical power: 4.54 kW EER: 2.73 ESEER: 4.24 Values ​​referred to the EN14511 standard External air temperature 35°C - Water temperature 7°C Cooling power: 12.4 kW EER: 2.75 ESEER: 4.37 Class : C Heating External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 14.3 kW Absorbed electrical power: 4.53 kW COP: 3.16 Values ​​referred to the EN14511 standard External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 14.3 kW COP: 3.19 Class : B Energy efficiency in cooling SEER : 4.33 Efficiency ηs : 170 % Energy efficiency in low temperature heating PDesign : 10.4 kW SCOP: 3.81 Efficiency ηs : 149 % Seasonal efficiency class : A+ Energy efficiency in medium temperature heating PDesign : 10.61 kW SCOP: 2.93 Efficiency ηs : 114 % Seasonal efficiency class : A+ Performance Cooling down Exchanger water flow rate: 0.59 m 3 /h Available pump head: 56.6 kPa Sound power level : 70 dB(A) Sound pressure : 55 dB(A) Heating Exchanger water flow rate: 0.69 m 3 /h Available pump head: 51.1 kPa Sound power level : 70 dB(A) Sound pressure : 55 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-410 Operating limits Heating External air temperature : -20°C ~ 45°C Introduced water temperature : 24°C~ 60°C Cooling down External air temperature : -10°C ~ 46°C Introduced water temperature : -8°C ~ 20°C Dimensions and weight Dimensions (LxWxH): 900x420x1390 mm Empty weight: 135.0 kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single circuit configuration using R410A refrigerant, air side exchange coil with copper pipes and aluminum fins, water side heat exchanger with brazed plates. The unit is equipped with an electronic expansion valve and built-in hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to the accurate thermoregulation combined with the use of inverter technology. The accurate design and the use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are regulated synergistically according to proprietary logics to maximize unit efficiency. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology which guarantees the exact energy in correspondence with the real needs of the building. High efficiency which translates into reduced energy consumption throughout the unit's working period. Comfort applications Residential buildings Business premises Infrastructure for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems that can be created with cascade systems ErP Ready i-BX-N thanks to the inverter technology complies with the ErP directive, exceeding the minimum requirements for seasonal energy efficiency in heating, SCOP, both for low temperature and medium temperature applications Silent operation : Noise emissions are reduced thanks to the modulation of the frequency of the compressor and the speed of the fan Reduced consumption : The dynamic control of the water delivery temperature according to the outside air temperature greatly increases the comfort and energy efficiency of the system Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages hot water production via a 3-way valve to be installed outside the unit Ease of installation : The i-BX-N heat pumps are of the "packaged" monobloc type which are particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the typical procedures of direct expansion air conditioning systems Intelligent management of your system Nadisystem guarantees centralized regulation of the system, ensuring: Easy communication between the different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on the availability, yields and costs of their use, always preferring renewable sources. The auxiliary sources are activated to meet the building's needs at low outside temperatures by integrating the thermal power of the heat pump System customization Nadisystem has various special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of system with different water temperature levels. Cascade management of units If the heat requirements are high, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure consisting of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with stepless speed regulation that improve the air distribution obtaining low consumption and minimizing the sound level Drums Condenser with copper tubes and aluminum fins Standard coil protection grids up to size 015 Control Keyboard with LCD display and electronic adjustment via menu NADI Compact Functional keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM control Setting of the water set point with fixed or dynamic value with Climatic Curve. Antifreeze protection according to water temperature and outside air temperature. Domestic hot water production. 4 Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade system management If the heat requirements are high, it is possible to connect up to 4 units of the same power in cascade Managed in master-slave mode, with the master unit in charge of processing the information and then transmitting it to the slave units High degree of partialisation of the supplied power, without reducing performance, and precise sizing of the system Possibility of dedicating just one or all the units to the production of domestic hot water. Integrated hydronic unit All plumbing components for installation are already included with no increase in unit size. EC pump, brushless motor with electronic switching to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion tank. Air vent valve. Mesh filter, unassembled but supplied with the unit Evaporator Brazed plate heat exchanger in AISI 316 steel, externally lined with anti-condensation mat in closed cell neoprene (CFC and HCFC-free). Thermostatic electric resistance to protect against the formation of ice inside. Low pressure drops and optimized heat exchange Refrigerant circuit Standard electronic expansion valve Optimized coolant flow Precise and effective temperature control Fast regulation and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special antifreeze function Dedicated algorithms avoid the formation of ice inside by managing the operation Of the electrical resistance on the plate heat exchanger. Of the pump according to the outside air temperature. Of the flow switch in case of no flow The unit is also set up to operate, with brine mixtures, down to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water tank probe and inertial tank probe Copper-Aluminium type batteries with epoxy painting Copper-Copper type batteries Hydraulic separator Domestic hot water storage Antifreeze electric heater on base and for auxiliary condensate drain pan RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical features Model : i-BX-N008M Article number : 401474 Command on board included Cooling down External air temperature 35°C - Water temperature 7°C Cooling power: 7.5 kW Absorbed electrical power: 2.72 kW EER: 2.76 ESEER: 4.45 Values ​​referred to the EN14511 standard External air temperature 35°C - Water temperature 7°C Cooling power: 5.9 kW EER: 2.81 ESEER: 4.83 Class : C Heating External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 8.51 kW Absorbed electrical power: 2.65 kW COP: 3.21 Values ​​referred to the EN14511 standard External air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 8.5 kW COP: 3.26 Class : A Energy efficiency in cooling SEER: 4.71 Efficiency ηs : 185 % Energy efficiency in low temperature heating PDesign : 6.02 kW SCOP : 4.15 Efficiency ηs : 163 % Seasonal efficiency class: A++ Energy efficiency in medium temperature heating PDesign : 7.02 kW SCOP: 3.23 Efficiency ηs : 126 % Seasonal efficiency class: A++ Performance Cooling down Exchanger water flow rate: 0.36 m 3 /h Available pump head: 66.5 kPa Sound power level : 66 dB(A) Sound pressure : 51 dB(A) Heating Exchanger water flow rate: 0.41 m 3 /h Available pump head: 57.9 kPa Sound power level : 66 dB(A) Sound pressure : 51 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-410 Operating limits Heating External air temperature : -20°C ~ 45°C Introduced water temperature : 24°C~ 60°C Cooling down External air temperature : -10°C ~ 46°C Introduced water temperature : -8°C ~ 20°C Dimensions and weight Dimensions (LxWxH): 900x420x1240 mm Empty weight: 100.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single circuit configuration using R410A refrigerant, air side exchange coil with copper pipes and aluminum fins, water side heat exchanger with brazed plates. The unit is equipped with an electronic expansion valve and built-in hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to the accurate thermoregulation combined with the use of inverter technology. The accurate design and the use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are regulated synergistically according to proprietary logics to maximize unit efficiency. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology which guarantees the exact energy in correspondence with the real needs of the building. High efficiency which translates into reduced energy consumption throughout the unit's working period. Comfort applications Residential buildings Business premises Infrastructure for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems that can be created with cascade systems ErP Ready i-BX-N thanks to the inverter technology complies with the ErP directive, exceeding the minimum requirements for seasonal energy efficiency in heating, SCOP, both for low temperature and medium temperature applications Silent operation : Noise emissions are reduced thanks to the modulation of the frequency of the compressor and the speed of the fan Reduced consumption : The dynamic control of the water delivery temperature according to the outside air temperature greatly increases the comfort and energy efficiency of the system Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages hot water production via a 3-way valve to be installed outside the unit Ease of installation : The i-BX-N heat pumps are of the "packaged" monobloc type which are particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the typical procedures of direct expansion air conditioning systems Intelligent management of your system Nadisystem guarantees centralized regulation of the system, ensuring: Easy communication between the different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on the availability, yields and costs of their use, always preferring renewable sources. The auxiliary sources are activated to meet the building's needs at low outside temperatures by integrating the thermal power of the heat pump System customization Nadisystem has various special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of system with different water temperature levels. Cascade management of units If the heat requirements are high, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure consisting of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with stepless speed regulation that improve the air distribution obtaining low consumption and minimizing the sound level Drums Condenser with copper tubes and aluminum fins Standard coil protection grids up to size 015 Control Keyboard with LCD display and electronic adjustment via menu NADI Compact Functional keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM control Setting of the water set point with fixed or dynamic value with Climatic Curve. Antifreeze protection according to water temperature and outside air temperature. Domestic hot water production. 4 Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade system management If the heat requirements are high, it is possible to connect up to 4 units of the same power in cascade Managed in master-slave mode, with the master unit in charge of processing the information and then transmitting it to the slave units High degree of partialisation of the supplied power, without reducing performance, and precise sizing of the system Possibility of dedicating just one or all the units to the production of domestic hot water. Integrated hydronic group All plumbing components for installation are already included with no increase in unit size. EC pump, brushless motor with electronic switching to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, unassembled but supplied with the unit Evaporator Brazed plate heat exchanger in AISI 316 steel, externally lined with anti-condensation mat in closed cell neoprene (CFC and HCFC-free). Thermostatic electric resistance to protect against the formation of ice inside. Low pressure drops and optimized heat exchange Refrigerant circuit Standard electronic expansion valve Optimized coolant flow Precise and effective temperature control Fast regulation and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special antifreeze function Dedicated algorithms avoid the formation of ice inside by managing the operation Of the electrical resistance on the plate heat exchanger. Of the pump according to the outside air temperature. Of the flow switch in case of no flow The unit is also set up to operate, with brine mixtures, down to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water tank probe and inertial tank probe Copper-Aluminium type batteries with epoxy painting Copper-Copper type batteries Hydraulic separator Domestic hot water storage Antifreeze electric heater on base and for auxiliary condensate drain pan RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N035T Item code : 401493 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 35.1 kW Absorbed electrical power: 12.7 kW EER : 2.76 ESEER : 3.93 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 35.2 kW EER : 2.78 ESEER : 4.01 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 38.1 kW Electrical power consumption: 12.0 kW COP : 3.17 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 38.0 kW COP : 3.19 Class : B Energy Efficiency in Cooling SEER : 4.2 Efficiency ηs : 165 % Energy Efficiency in Low Temperature Heating PDesign : 28.1 kW SCOP : 3.7 Efficiency ηs : 145 % Seasonal efficiency class: A+ Energy Efficiency in Medium Temperature Heating PDesign : 31.97 kW SCOP : 3.01 Efficiency ηs : 117 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 1.68 m3 /h Pump useful head: 73.5 kPa Sound power level: 77 dB(A) Sound pressure: 61 dB(A) Heating Exchanger water flow rate: 1.84 m3 /h Pump useful head: 61.8 kPa Sound power level: 77 dB(A) Sound pressure: 61 dB(A) Electrical Data Power supply (V,Hz,Ø) : 380~415/50/3 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 1450x650x1700 mm Empty weight: 325.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit. Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with closed-cell neoprene anti-condensation mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N025T Item code : 401481 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 24.7 kW Electrical power consumption: 8.99 kW EER : 2.75 ESEER : 3.93 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 24.7 kW EER : 2.77 ESEER : 4.03 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 26.1 kW Electrical power consumption: 8.31 kW COP : 3.14 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 26.1 kW COP : 3.16 Class : B Energy Efficiency in Cooling SEER : 4.22 Efficiency ηs : 166 % Energy Efficiency in Low Temperature Heating PDesign : 21.9 kW SCOP : 3.77 Efficiency ηs : 148 % Seasonal efficiency class: A+ Energy Efficiency in Medium Temperature Heating PDesign : 21.37 kW SCOP : 2.95 Efficiency ηs : 115 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 1.18 m3 /h Pump useful head: 61.5 kPa Sound power level: 75 dB(A) Sound pressure: 59 dB(A) Heating Exchanger water flow rate: 1.26 m3 /h Pump useful head: 55 kPa Sound power level: 75 dB(A) Sound pressure: 59 dB(A) Electrical Data Power supply (V,Hz,Ø) : 380~415/50/3 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 1450x550x1700 mm Empty weight: 265.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit. Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with anti-condensation closed-cell neoprene mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N015T Item code : 401479 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 14.7 kW Electrical power consumption: 5.24 kW EER : 2.81 ESEER : 4.31 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 14.7 kW EER : 2.82 ESEER : 4.38 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 17.2 kW Absorbed electrical power: 5.15 kW COP : 3.34 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 17.2 kW COP : 3.36 Class : A Energy Efficiency in Cooling SEER : 4.53 Efficiency ηs : 178 % Energy Efficiency in Low Temperature Heating PDesign : 12.3 kW SCOP : 3.67 Efficiency ηs : 144 % Seasonal efficiency class: A+ Energy Efficiency in Medium Temperature Heating PDesign : 13.82 kW SCOP : 2.98 Efficiency ηs : 116 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 0.7 m3 /h Pump useful head: 78.7 kPa Sound power level: 74 dB(A) Sound pressure: 59 dB(A) Heating Exchanger water flow rate: 0.83 m3 /h Pump useful head: 71.5 kPa Sound power level: 74 dB(A) Sound pressure: 59 dB(A) Electrical Data Power supply (V,Hz,Ø) : 380~415/50/3 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 1450x550x1200 mm Empty weight: 180.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with anti-condensation closed-cell neoprene mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N010T Item code : 401477 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 10.5 kW Absorbed electrical power: 3.64 kW EER : 2.88 ESEER : 4.24 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 10.5 kW EER : 2.89 ESEER : 4.29 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 11.4 kW Absorbed electrical power: 3.66 kW COP : 3.11 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 11.4 kW COP : 3.12 Class : B Energy Efficiency in Cooling SEER : 4.46 Efficiency ηs : 175 % Energy Efficiency in Low Temperature Heating PDesign : 8.48 kW SCOP : 3.64 Efficiency ηs : 142 % Seasonal efficiency class: A+ Energy Efficiency in Medium Temperature Heating PDesign : 9.07 kW SCOP : 2.92 Efficiency ηs : 114 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 0.5 m3 /h Pump useful head: 53.3 kPa Sound power level: 69 dB(A) Sound pressure: 54 dB(A) Heating Exchanger water flow rate: 0.55 m3 /h Pump useful head: 50.2 kPa Sound power level: 69 dB(A) Sound pressure: 54 dB(A) Electrical Data Power supply (V,Hz,Ø) : 380~415/50/3 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 900x420x1240 mm Empty weight: 115.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with anti-condensation closed-cell neoprene mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N010M Item code : 401475 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 9.9 kW Absorbed electrical power: 3.64 kW EER : 2.72 ESEER : 4.21 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 9.91 kW EER : 2.73 ESEER : 4.26 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 11.0 kW Electrical power consumption: 3.65 kW COP : 3.01 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 11.0 kW COP : 3.02 Class : B Energy Efficiency in Cooling SEER : 4.37 Efficiency ηs : 172 % Energy Efficiency in Low Temperature Heating PDesign : 8.18 kW SCOP : 3.54 Efficiency ηs : 139 % Seasonal efficiency class: A+ Energy Efficiency in Medium Temperature Heating PDesign : 8.54 kW SCOP : 2.82 Efficiency ηs : 110 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 0.47 m3 /h Pump useful head: 57.7 kPa Sound power level: 69 dB(A) Sound pressure: 54 dB(A) Heating Exchanger water flow rate: 0.53 m3 /h Pump useful head: 54.1 kPa Sound power level: 69 dB(A) Sound pressure: 54 dB(A) Electrical Data Power supply (V,Hz,Ø) : 220~240/50/1 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 900x420x1240 mm Empty weight: 115.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with anti-condensation closed-cell neoprene mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! IN CASE OF UNAVAILABILITY IMMEDIATELY, THE PRODUCT WILL BE ORDERED AND SHIPPED WITHIN 10 WORKING DAYS OPTIONAL STARTER TO BE PURCHASED SEPARATELY! Technical Features Model : i-BX-N020T Item code : 401480 On-board control included Cooling Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 18.7 kW Electrical power consumption: 7.0 kW EER : 2.67 ESEER : 3.88 Values ​​referred to the EN14511 regulation Outside air temperature 35°C - Water temperature 7°C Cooling capacity: 18.7 kW EER : 2.7 ESEER : 3.99 Class : C Heating Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 21.7 kW Electrical power consumption: 6.9 kW COP : 3.14 Values ​​referred to the EN14511 regulation Outside air temperature 7°C - 87% RH Water temperature 40°C/45°C Thermal power: 21.7 kW COP : 3.16 Class : B Energy Efficiency in Cooling SEER : 4.14 Efficiency ηs : 163 % Energy Efficiency in Low Temperature Heating PDesign : 16.5 kW SCOP : 3.56 Efficiency ηs : 139 % Seasonal efficiency class: A+ Energy Efficiency in Medium Temperature Heating PDesign : 17.31 kW SCOP : 2.91 Efficiency ηs : 113 % Seasonal efficiency class: A+ Performance Cooling Exchanger water flow rate: 0.89 m3 /h Pump useful head: 74.6 kPa Sound power level: 74 dB(A) Sound pressure: 59 dB(A) Heating Exchanger water flow rate: 1.05 m3 /h Pump useful head: 60.3 kPa Sound power level: 74 dB(A) Sound pressure: 59 dB(A) Electrical Data Power supply (V,Hz,Ø) : 380~415/50/3 Refrigerant gas: R-410 Operating limits Heating Outside air temperature: -20°C ~ 45°C Inlet water temperature: 24°C~ 60°C Cooling Outside air temperature : -10°C ~ 46°C Inlet water temperature: -8°C ~ 20°C Dimensions and Weight Dimensions (LxWxH): 1450x550x1200 mm Empty weight: 205.0 Kg Climaveneta reversible heat pumps from 4.2 to 35.1 kW Perfect comfort and maximum efficiency Outdoor unit capable of providing heating, cooling and domestic hot water production with hermetic rotary compressors driven by variable speed motors in single-circuit configuration using R410A refrigerant, air-side exchange battery with copper pipes and aluminum fins, water-side exchanger with brazed plates. The unit is equipped with an electronic expansion valve and integrated hydronic module as standard. Flexible and reliable machine that adapts to the most diverse load conditions thanks to accurate thermoregulation combined with the use of inverter technology. The accurate design and use of innovative variable speed motors (inverters) ensure a high level of energy efficiency both at full and partial load. The heat pump for every need System efficiency The unit is designed with a system approach: all components are synergistically regulated according to proprietary logics to maximize the unit's efficiencies. High efficiency at partial loads High seasonal efficiency values, thanks to the modulation of the compressor with DC inverter technology that guarantees the exact energy corresponding to the real needs of the building. High efficiency that translates into reduced energy consumption throughout the working period of the unit. Comfort applications Residential buildings Commercial premises Infrastructures for entertainment Executive offices Hotels and Resorts Health facilities Centralized systems can be created with cascade systems ErP Ready Thanks to inverter technology, i-BX-N complies with the ErP directive, exceeding the minimum seasonal energy efficiency requirements in heating, SCOP, for both low temperature and medium temperature applications. Silent operation : Noise emissions are reduced thanks to the modulation of the compressor frequency and fan speed Reduced consumption : The dynamic control of the water flow temperature based on the external air temperature significantly increases the comfort and energy efficiency of the system. Domestic hot water : The production of domestic hot water is guaranteed all year round. The controller manages the production of hot water via a 3-way valve to be installed externally to the unit Ease of installation : The i-BX-N heat pumps are of the “packaged” monobloc type, particularly simple to install. The hydraulic components are all contained inside the unit and the connection pipes are of the hydraulic type, therefore it is not necessary to carry out the procedures typical of direct expansion air conditioning systems. Intelligent management of your system Nadisystem guarantees centralized regulation of the system ensuring: Easy communication between different components Simplified installation Reduced number of checks Integration between different sources Nadisystem integrates different energy sources based on availability, yields and costs of their use, always favoring renewable sources. The auxiliary sources are activated to satisfy the building's needs at low external temperatures by integrating the thermal power of the heat pump Customization of the system Nadisystem has several special functions that allow you to customize the system for every need. The controller is able to regulate two zones in both heating and cooling and with different flow temperatures, making the i-BX-N heat pump compatible with different types of systems with different water temperature levels. Cascading unit management In case of high thermal needs, it is possible to connect up to 4 units of the same power, optional configuration. The cascade configuration is managed in master/slave mode, with the master unit managing the information and transmitting it to the slave units. Structure Structure made of a base and self-supporting panels in hot-dip galvanized steel, painted with RAL 7035 polyester powders. Solidity and robustness Maximum accessibility for service and maintenance operations Fans Axial fans with continuous speed regulation that provide improved air distribution, achieving low consumption and minimising noise levels Drums Condenser with copper tubes and aluminum fins Battery protection grids as standard up to size 015 Control Keyboard with LCD display and electronic menu adjustment NADICompact Function keys Graphic display and icons allow quick and easy consultation and intervention on the unit by means of a multi-level menu NADISYSTEM Control Setting the water set point with a fixed or dynamic value with a climatic curve. Antifreeze protection depending on water temperature and outside air temperature. Production of domestic hot water. 4Management of external auxiliary sources. Two zones with different water temperature distribution Digital input for night function (Night mode). Remote connectivity to BMS systems via serial card (accessory). Cascade System Management In case of high thermal requirements, it is possible to connect up to 4 units of the same power in cascade Managed in master slave mode, with the master unit taking care of processing the information and then transmitting it to the slave units High degree of partialization of the power supplied, without decreasing performance, and a precise sizing of the system Possibility to dedicate one or all units to the production of domestic hot water. Integrated hydronic group All hydraulic components for installation are already included without any increase in unit size. EC pump, brushless motor with electronic commutation to guarantee low consumption and high system efficiency Flow switch, to protect the exchanger for low water flow rates Safety valve. Expansion vessel. Air vent valve. Mesh filter, not fitted but supplied with the unit Evaporator Brazed plate exchanger in AISI 316 steel, externally coated with anti-condensation closed-cell neoprene mat (CFC and HCFC-free). Electric thermostatic resistance to protect against ice formation inside. Low pressure drops and optimised heat exchange Refrigerant circuit Electronic expansion valve as standard Optimized coolant flow Precise and effective temperature control Quick adjustment and high efficiency Compressor Mitsubishi Electric compressors, synonymous with quality, reliability and performance at partial loads. Compressor installed on rubber anti-vibration supports and acoustically isolated by special sound-absorbing material. Special anti-freeze function Dedicated algorithms prevent the formation of ice inside by managing the operation Of the electrical resistance on the plate exchanger. Of the pump based on the outside air temperature. Of the flow switch in case of lack of flow The unit is also designed to operate with non-freezing mixtures up to an exchanger outlet temperature of -8°C. Accessories Remote keyboard Wired room terminal with backlit display, complete with temperature and humidity probe Cascade unit management kit Domestic hot water storage probe and inertial storage probe Copper-Aluminum type batteries with epoxy coating Copper-Copper type batteries Hydraulic separator Hot water storage Antifreeze electric resistance for base and auxiliary condensation collection tray RS485 serial card for ModBus protocol Rubber base anti-vibration mounts Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less