Dualsplit Wall Air Conditioners
HAIER Haier Dual Split Inverter Air Conditioner Tundra Green 9+9 Series With 2u40ceffra R-32 Class A/A 9000+9000
Overview AIR CONDITIONER DUAL SPLIT INVERTER HAIER TUNDRA GREEN R32 9000+9000 Class A/A with 2U40CEFFRA - NEW 2018 Technical specifications INDOOR UNIT Model: o Indoor unit catalog code: 2x AS25TAAHRA o Technology: INVERTER o Color: WHITE Performance: o Nominal Cooling output power: 2.6 kW o Power output Nominal heating: 3.4 kW o Treated air volume: 500 m³ o Internal Unit Sound Power: 53 dB o Sound pressure dB(A) 36/33/29/21 o Dimensions WxDxH mm 820x195x280; 8.8 kg OUTDOOR UNIT Model: o Indoor unit catalog code: 2U40CEFFRA Energy efficiency: o SEER/SCOP (W/W): 5.1/3.8 o Energy Efficiency Class (cooling): A o Energy Efficiency Class (heating): A o Annual energy consumption1 kWh/per cooling: 261 o Annual energy consumption1 kWh/per heating: 1216 Performance: o Nominal cooling capacity (kW): 3.8 o Nominal heating capacity (kW): 4.1 o Power absorbed in cooling (kW): 1.22 o Absorbed power in heating (kW): 1.17 o Min-max outdoor unit sound pressure (dB-A): 46/51 o Nominal sound power dB(A): 60 o Treated air volume m³/h 1900 o Sound power dB(A) 62 o Sound pressure dB(A) 54 Characteristics: o Power supply (V/Hz/?) : 230/50/1 o Refrigerant gas : R32 o Guaranteed operating range: - Cooling °C: -10~46 - Heating °C: -15~24 Dimensions: o L x D x H (mm): 810x288x688 ; 43kg Main features TUNDRA GREEN R32 Haier introduces the new Tundra Green inverter wall air conditioner with R32 refrigerant gas. In accordance with the objectives of the European legislation on greenhouse gas emissions and the demands of improving energy efficiency, Haier has invested in Research and Development to provide modern solutions for air conditioning. Today the R32 range is implemented with monosplit and multisplit solutions. Advantages of R32 gas Compared with traditional R410A gas, the potential GWP level of R32 is about 1/3 less. (GWP is 675 for R32 vs 2088 for R410A). As a single refrigerant component, R32 is also easy to recycle and reuse. There are no concerns about splitting and splitting as R32 is not a gas mixture. MAIN FEATURES: o Superquiet: with the Super Quiet setting the level of only 21 dB(A) is reached o Intelligent Air: this function automatically directs the deflectors so as to best distribute the flow according to the set mode o Sleep function: Haier has designed a program for the night function of the air conditioner to ensure maximum comfort without wasting energy o Energy saving and high efficiency compressor o Self-cleaning exchanger: helps keep the heat exchanger clean from mould, dust, etc… o Wi-Fi?Optional Allows you to set the air conditioner remotely Features list - On-off card - 180° DC - DC motor - Sleep function - 6 Ventilation Speeds - Intelligent Air - Smart Defrosting - AutoMode - Auto vertical flow - Self-cleaning exchanger - Reversible Condensate Drain - Display tests - Auto Restart - Blue Fin - Easy Clean Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€899,56
Hisense Hisense Dual Split Inverter Air Conditioner New Energy 7+7 Series With 2amw42u4rgc R-32 Integrated Wi-Fi 7000+7000 - New
Technical features Indoor Units Model Internal Unit Catalog Code: 2x KC20MR00G Power: 7000 btu/h Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 822×258×203 mm Integrated Wi-Fi Optional Wire Control ( Code YXE-C01U ) Voice control with Alexa and Google Home Outdoor Unit Model: External Unit catalog code: 2AMW42U4RGC Number of connectable indoor units : up to 2 indoor units Energy efficiency: SEER: 7.6 SCOP : 4.4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption Cooling : 189 kWh/a Annual energy consumption Heating : 1114 kWh/a Performance: Cooling Capacity: 4.1 kW Heating Capacity: 4.5 kW Std cooling absorption: 0.95 kW Std heating absorption: 0.95 kW Sound power level : 58 dB(A) Sound pressure level : 47~53 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -20° ~ 24° C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 30 m Maximum height difference Indoor Unit / Outdoor Unit: 15 m Dimensions: External Unit Dimensions (WxHxD): 715x540x240 mm Weight of Outdoor Unit: 28.5 Kg 3 year warranty (5 on the compressor) The Hisense Italia warranty can be activated within 1 month from the date of purchase at the address http://www.hisenseitalia.it/clima/supporto Multisplit Outdoor Unit Technologies High Efficiency Twin Rotary DC Inverter Compressor The design of the new dual rotor BLDC Inverter compressor ensures better balancing and reduced vibrations. This translates into the maximum level of silence and excellent performance in terms of efficiency and energy saving. Full DC Inverter Hisense Inverter Expert technology guarantees high efficiency and low sound level thanks to the combined action of the DC Inverter compressor, the DC Inverter fan motor and the electronic expansion valve Smart Defrost Based on the historical data, the system adapts the conditions for activating the defrost to ensure maximum comfort in heating mode Operating range The new Free Match outdoor units guarantee maximum efficiency even at low temperatures, down to -20° in heating Operating range The dimensions of the new Free Match outdoor units have been reduced by 10% to allow them to be installed even in small spaces DC drive technology with 180° sine wave The system constantly monitors the compressor frequency and creates the most efficient waveform to determine effective consumption savings. Curve control Compressor with rubidium magnet Thanks to the greater compression of the gas molecules, the rubidium magnet compressor guarantees greater efficiency and lower absorption Electronic expansion valve The outdoor unit uses an electronic expansion valve that regulates and optimizes the refrigerant amount of all operating indoor units. Operation with wide voltage range The outdoor unit can work with voltage from 176V to 264V. In the new models, the use of an automatic voltage regulation technique ensures that the protection value adjusts according to it, keeping the operating frequency at an optimal value. Exchanger design: designed to improve its efficiency The design of the external exchanger was designed to increase the heat transfer in order to make the refrigeration circuit more efficient and avoid the creation of blocks of ice. Another advantage is that it can support long-distance connections between outdoor units and indoor units without reducing the cooling capacity. Hisense New Energy Cutting-edge technologies, elegant design, advanced features and integrated Wi-Fi Hisense air conditioners are managed comfortably inside and outside the home with a mobile device and a Wi-Fi connection. HiSmart Life is the easy-to-use app with an intuitive interface that allows you to control the air conditioner wherever you are. The app is available for iOS and Android Hisense has also thought of the more "technological" ones The HiSmart Life air conditioner is one of the jewels of the 2021 catalog. It supports Amazon, Google APP and "speaks" 5 languages: English, French, German, Italian and Spanish. Wi-Fi control Hisense air conditioners are managed comfortably inside and outside the home with a mobile device and a Wi-Fi connection. HiSmart Life is the simple to use app with an intuitive interface that allows you to control the air conditioner wherever you are. The app is available for iOS and Android. After downloading the app and pairing the air conditioner, the app allows you to manage operating modes, temperature, fan speed and air flow. From the «Intelligent function» section it is also possible to set daily or weekly timers. Smart Voice Control The new HiSmart Life app is compatible with Alexa and Google assistant, thanks to voice interaction, it is possible to turn on, turn off, adjust the temperature and set the operating mode (cooling or heating). Find HiSmart Life in the Alexa Skills and in the Google assistant catalog. Three Dimensional Air Flow The room temperature remains constant thanks to the combination of vertical and horizontal automatic swings of the louvers. The air is distributed evenly throughout the room, reaching every corner, even in the largest rooms Universal unit for mono and multi systems The universal indoor units can be connected to Monosplit and Multisplit outdoor units to ensure maximum installation versatility Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€876,00
Hisense Hisense Dual Split Inverter Air Conditioner Silentium Series 9 + 9 With 2amw42u4rgc R-32 Integrated Wi-Fi 9000 + 9000
Technical features Indoor units Model Catalog code Indoor Unit : 2 x QA25XX0AG Series: Silentium Power: 9000 btu/h Cooling/Heating Capacity: 2.6/3.2 kW Air flow: 10.83 m3/min Sound pressure level (min-max): 19-39 dB(A) Dimensions WxHxD (mm): 962×319×226 ; 13Kg Outdoor Unit Model: Indoor Unit catalog code: 2AMW42U4RRA Max indoor units: up to 2 indoor units Energy efficiency: SEER(W/W) : 6.6 SCOP(W/W) : 4.6 Energy Efficiency Class (Cooling) : A++ Energy Efficiency Class (Heating) : A+ Performance: Cooling Capacity (kW) : 4.1 Heating Capacity (kW) : 4.6 Sound power level dB(A) 62 Sound pressure level dB(A) 47-52 Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15~48°C - Heating: -15~24°C Dimensions: Outdoor Unit WxHxD (mm) : 730x540x260 ; 34 kgs 2 remote controls included 3 year warranty (5 on the compressor) The Hisense Italia warranty can be activated within 1 month from the date of purchase at the addresshttp://www.hisenseitalia.it/clima/supporto Multisplit Line - Free Match Free Match products are ideal where an indoor unit is required for each room, such as a living room and 3 bedrooms. The system allows you to combine up to 5 indoor units with a single outdoor unit. Indoor units can be of different types, including ducted, wall-mounted, cassette, and ceiling/floor. High Efficiency Twin Rotary DC Inverter Compressor The design of the new dual rotor BLDC Inverter compressor ensures better balancing and reduced vibrations. This translates into the maximum level of silence and excellent performance in terms of efficiency and energy saving. DC drive technology with 180° sine wave The system constantly monitors the compressor frequency and creates the most efficient waveform to determine effective fuel savings. Compressor with rubidium magnet Thanks to the greater compression of the gas molecules, the rubidium magnet compressor guarantees greater efficiency and lower absorption. Electronic expansion valve The outdoor unit uses an electronic expansion valve which regulates optimizes the refrigerant amount of all operating indoor units. Operation with wide voltage range The outdoor unit can work with voltage from 176V to 264V. In the new models, the use of an automatic voltage regulation technique ensures that the protection value adjusts according to it, keeping the operating frequency at an optimal value. Exchanger design: designed to improve its efficiency The design of the external exchanger has been designed to increase heat transfer in order to make the refrigeration circuit more efficient and avoid the creation of blocks of ice. Another advantage is that it can support long-distance connections between outdoor units and indoor units without reducing the cooling capacity. The new Hisense air conditioners use the ecological R32 refrigerant gas which, thanks to its reduced global warming potential (GWP), helps to pursue the European mission for the protection and conservation of our environment General characteristics SILENT series Hisense Italia offers the Silentium air conditioner, top of the range of the residential line, which is characterized by high performance, excellent comfort and elegant design. In line with European environmental protection regulations, it uses the new R32 ecological gas (with reduced environmental impact) which, combined with the DC Inverter compressor, makes it possible to achieve energy efficiency class A+++ in both cooling and heating. Extremely silent, only 16.5 decibels, it can be managed remotely via smartphone or tablet , with a simple and intuitive Hi-Smart Life APP, available in both Android and IOS versions. The design is captivating with the sinuous and refined lines of the motorized panel which opens when switched on and closes when switched off. Silentium is the top of the range, thanks to the high energy efficiency A+++, the use of R32 ecological gas and the high degree of comfort reserved for the user, managed via the device's APP. Special restart at 8°C The special 8°C heating mode is very useful especially for homes located in areas with colder temperatures. During your absence, in fact, the unit will start in heating mode as soon as a temperature below 8°C is detected, allowing your rooms not to freeze and reducing the level of humidity in the air. Highly silent Thanks to the new design, the air conditioner achieves a very low noise level: >16.5dB in silent mode. Wi-Fi control Conveniently control your air conditioner from anywhere in the house with your smartphone and a WiFi connection. R-32: the new low environmental impact gas Silentium uses R-32 , a refrigerant which results in lower CO2 emissions and therefore has a lower global warming potential. Characteristics: A+++ energy efficiency SEER/SCOP 9K (8.5/5.1) 12K (8.5/4.6) R32 , new ecological refrigerant 3D inverters Cooling at low temperatures -15° Heating at low temperatures -20°C 8 degree heating Quiet mode , 16.5dB Electronic expansion valve sliding panel Universal indoor unit for mono & multi Wifi Room Card Control Function 4 in 1 filter : vitamins C+catecin+sliver+HEPA-) Activated carbon filter Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€968,00
HERMANN SAUNIER DUVAL Air Conditioner Hermann Saunier Duval Dual Split Inverter Top Comfort Series 9+12 With Sdh20-040mc2no R-32 9000+12000
Technical Features 1) Model : Internal Unit Catalog Code: 1 x SDH20-025NWI Power: 9000 btu Electrical Data: Cooling Cooling Power: 2.7 kW Maximum Power: 3.8 kW Heating Heating Power: 2.93 kW Maximum Power: 4.4 kW Characteristics Air flow: 390 / 660 m³/h Sound pressure: 24 / 41 db(A) Sound Power : 39 / 56 db(A) Pipe Connection: 1/4 - 3/8 Dimensions and Weight: Dimensions: 290 x 865 x 210 Weight: 10.5 Kg 2) Model: Internal Unit Catalog Code: 1 x SDH20-035NWI Power: 12000 btu Electrical Data: Cooling Cooling Power: 3.5 kW Maximum Power: 3.81 kW Heating Heating Power: 3.81 kW Maximum Power: 4.4 kW Characteristics Air flow: 390 / 680 m³/h Sound pressure: 25 / 43 db(A) Sound Power : 40 / 58 db(A) Pipe Connection: 1/4 - 3/8 Dimensions and Weight: Dimensions: 295 x 865 x 210 Weight: 11 Kg External Unit Model : SDH20-040MC2NO Power supply V/Ph/Hz : 230/1/50 Refrigerant Gas: R-32 Sound Power: 65 db(A) Sound pressure: 55 db(A) Maximum Pipe Length between Indoor and Outdoor Unit: 20 m Maximum Total Pipe Length: 20 m Maximum height difference between internal and external units: 15 m Tube Diameter: 1/4 - 3/8 Performance Cooling Cooling Power kW : 2,05 / 4,4 Cooling Power Btu/h : 7000 / 15000 Maximum Current: 5.5A Heating Heating Power kW : 2,49 / 5,42 Heating Power Btu/h : 8500 / 18500 Maximum Current: 7A General Features VivAir Top Comfort SDH20 The new range of air conditioners that improve efficiency, sustainability and design that you will find on our website climaconvenienza.it VivAir Top Comfort SDH 20 is the new range of air conditioners that use R32 refrigerant gas which offers many advantages such as greater energy efficiency , a lower impact on the climate (Global Warming Potential - GWP = 675) and a smaller amount of charge required compared to air conditioners that use R410 A gas. Thanks to the use of the new R32 gas, the new Hermann Saunier Duval air conditioners are already in line with the achievement of the objectives established by the new regulation on fluorinated gases issued by the EU in 2015, which prohibits the use of refrigerants with a GWP higher than 750 in monosplit air conditioners containing a refrigerant charge of less than 3 kg starting from 2025. VivAir Top Comfort SDH 20 is available in Dual, Trial and Quadri versions with cooling powers from 4.1 kW to 8 kW. Thanks to the new R32 refrigerant gas, 3D inverter technology and electronic expansion valve, it is possible to reach an energy class in cooling up to A++ (SEER up to 6.3) and in heating up to A+ (SCOP equal to 4). VivAir Top Comfort SDH 20 offers several functions to improve the comfort of your home: I Feel function to offer the desired temperature where the remote control is located, Turbo function to reach the desired temperature in the shortest time possible, regulation of the air flow direction vertically and horizontally, Quiet function to reduce noise to a minimum. VivAir Top Comfort SDH 20 also features an active ionizer device that purifies the air in the room by creating negative ions that neutralize positively charged particles, thus keeping the environment fresh and free from odors, bacteria and mold spores. The X-Fan function also removes humidity from the internal exchanger, keeping it dry and preventing the formation of rust and bacteria. All the functions described above are available only for wall-mounted units. The functions that can be set on the remote control supplied with the cassette and console units are equivalent to those of the VivAir Uni Comfort series. All supplied remote controls are easy to use and feature a large display to indicate the current operating status. The new R32 gas VivAir is the new range of Hermann Saunier Duval air conditioners that use the ecological refrigerant gas R32. Thanks to the use of the new gas, it is possible to obtain many advantages such as greater energy efficiency, a lower impact on the climate and a lower amount of charge required compared to air conditioners that use R410A gas. R32 gas is a safe gas, tested and already widely used for domestic applications in many foreign countries for several years. What impact does it have on the climate? To express the influence that a certain refrigerant would have if released into the atmosphere, the acronym GWP (Global Warming Potential) is used. The higher the GWP value, the greater the negative effect of that refrigerant on the climate and global warming. The new refrigerant R32 has a GWP of about 675, which corresponds to about a third of that of the gas R410A (GWP = 2088). Already ready for the new EU Regulations The new VivAir range is already in line with the achievement of the objectives set by the new directive N. 517/2014 on fluorinated gases issued by the European Union, which prohibits the use of refrigerants with a GWP higher than 750 in monosplit air conditioners containing a refrigerant charge of less than 3 kg starting from 2025. Multisplit air conditioner with ecological gas R32 Active Ionizer The active ionizer device inside the indoor unit creates negative ions that neutralize positively charged particles in the room, thus keeping the environment fresh and healthy, free from odors, bacteria and mold spores. X-Fan function The X-Fan function removes humidity from the internal exchanger, keeping it dry and preventing the formation of rust and bacteria, preserving the durability of the product and contributing to a healthier environment. Quiet function The Quiet function allows you to adjust the fan speed, reducing the noise of the internal unit to a minimum without altering the required comfort. Advantages : New refrigerant gas R32 Dedicated MultiSplit internal units: wall mounted, cassette and floor/ceiling Energy efficiency class in cooling up to A++ “Auto Clean X Fan” function to keep the exchanger dry Active Ionizer to improve the air quality in the environment Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.
€1.255,00
MITSUBISHI ELECTRIC Mitsubishi Electric Dual Split Inverter Air Conditioner AP-VGK Series 9000 + Floor 18000 with MXZ-3F68VF2 R-32 Wi-Fi 9000+18000
Technical Features Internal units 1) Model: Internal Unit Catalog Code: 1x MSZ-AP25VGK Power: 9000 Btu Cooling Capacity : 2.5 kW Heating capacity: 3.2 kW Treated Air: 4.9 ~ 12.9 m 3 /min Sound Power Level: 57 dB(A) Sound pressure level : 19 ~ 45 dB(A) Liquid Pipe Diameter: 6.35mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 299x798x219 mm Indoor Unit Weight: 10.5 kg Built-in Wi-Fi 2) Model: Internal Unit Catalog Code: 1x MFZ-KT50VG Power: 18000 Btu Cooling Capacity : 5.0 kW Heating capacity: 6.0 kW Treated Air: 5.6 ~ 14.0 m 3 /min Sound Power Level: 60 dB(A) Sound pressure level : 28 ~ 49 dB(A) Liquid Pipe Diameter: 6.35mm (1/4") Gas pipe diameter: 12.70 mm (1/2") Internal Unit Dimensions (HxWxD): 600x750x215 mm Indoor Unit Weight: 14.5 kg Wi-Fi Optional (Code MAC-567IF-E ) External Unit Model: External Unit Catalog Code: MXZ-3F68VF2/3 Max indoor units: up to 3 indoor units Energy Efficiency: SEER : 7.96 SCOP : 4.12 Energy Efficiency Class in Cooling: A++ Energy Efficiency Class in Heating: A+ Annual energy consumption in Cooling: 299 kWh/a Annual energy consumption in heating: 2312 kWh/a Performance: Cooling capacity: 6.8 kW Heating capacity: 8.6 kW Cooling Power Consumption: 1.84 kW Heating absorption: 1.91 kW Sound Power Level: 63 dB(A) Sound pressure level : 48~53 dB(A) Characteristics: Power supply (V/Hz/Φ) : 220~240/50/1 Refrigerant gas: R-32 Guaranteed temperature range: - Cooling: -10° ~ 46° C - Heating: -15° ~ 24° C Installation Data: Liquid Pipe Diameter: 6.35mm (1/4") x3 Gas pipe diameter: 9.52 mm (3/8") x3 Maximum pipe length: 60 m Maximum height difference between internal unit and external unit: 15 m external unit above Maximum height difference between internal unit and external unit: 10 m external unit below Dimensions: External Unit Dimensions (HxWxD): 710x840x330 mm External Unit Weight: 58.0 Kg Compact design and size The MSZ-AP units are characterised by their ultra-compact dimensions , with only 2 dimensional levels for 6 different power levels. MELCloud integrated The new MSZ-AP (in the VGK version) offers the user experience of MELCloud integrated into the machine. Ready to be configured and used, it allows the user to remotely manage, thanks to the Wi-Fi controller, all the functions of the air conditioner. Efficiency Thanks to careful design and the introduction of R32 refrigerant, the efficiency of the new MSZ-AP units has increased significantly, reaching class A+++ in cooling (sizes 25 and 35) and A++ in heating across the entire lineup. Air distribution Thanks to the presence of the motorized louver, it is possible to direct the air flow to achieve maximum comfort in the room in every operating mode (sizes 25-50). Furthermore, the horizontal flow eliminates annoying air currents towards the occupants. New backlit remote control The backlit remote control allows for easy viewing even at night. Silent operation For sizes 25/35 the noise emission of the internal unit is only 19dB when operating at minimum speed, ensuring maximum acoustic comfort inside the room. Night Mode By activating the Night Mode function from the remote control, you can set the air conditioner to operate at night: LED brightness reduction Deactivate the "beep" sound 3dB reduction in external unit noise emission. Advanced filtration Thanks to the air purifying filter in the internal unit, the new MSZ-AP model guarantees the removal of dust and bad odors. In addition, for sizes 25-50, it is possible to provide the optional silver ion air purifying filter, which captures bacteria, pollen and other allergens. Energy monitoring The new MSZ-AP model supports the energy consumption monitoring function thanks to the MELCloud Cloud remote control system. Efficiency Thanks to careful design and the introduction of R32 refrigerant, the efficiency of the new multisplit external units has increased significantly, reaching class A+++ in cooling (sizes 2F42,2F53,3F54) and A++ (sizes 2F42,2F53,3F54) in heating. Connectivity The extraordinary connectivity available with the new outdoor units allows to satisfy every need. The MXZ-F unit demonstrates all-round versatility , being connectable to most of the indoor unit range of the Residential and Commercial Line, whether they are wall mounted units, ceiling cassettes or ducted. Silence The new MXZ-F multi-split outdoor units reach a new level of operating silence, reducing noise emission by up to 4dB compared to the previous model in cooling mode and by up to 3dB in heating mode. R32: reduced environmental impact Thanks to the use of R32 refrigerant and a reduced pre-charge of the units compared to the previous model, the MXZ-F units introduce significantly fewer equivalent tons of CO2 into the environment. Automatic noise reduction mode By setting this function, it is possible to automatically decrease the noise of the outdoor unit as the internal loads to be satisfied decrease, such as during night-time cooling. Auto-correct links Simply press a button (MXZ-3E/F to MXZ-6D) or activate a single indoor unit (MXZ-2E/F) to ensure proper connection between indoor units and outdoor unit. In case of connection error, the system will automatically correct it. Mitsubishi Electric MSZ-KT Simple and elegant design The floor units have a design characterized by simple lines and flat surfaces that give elegance and modernity to the aesthetics and allow them to be perfectly combined with any type of furniture. High heating capacity The MFZ-KT model has a high capacity in heating mode compared to traditional air conditioners, which makes it suitable for use in winter and in mid-season. Multi-flow vane The delivery nozzle is characterised by the presence of three different deflectors, each with a profile specifically designed to optimise the distribution of the outgoing air, maximising comfort in both cooling and heating. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.
€2.747,00
HAIER Haier Dual Split Inverter Air Conditioner GEOS PLUS series 9+12 with 2U50MEFFRA R-32 Integrated Wi-Fi 9000+12000
Technical Features Internal units 1) Model Internal Unit Catalog Code: 1x AS25TEDHRA(M1) Commercial Code: 2501321BN Power: 9000 btu/h Built-in Wi-Fi 2) Model Internal Unit Catalog Code: 1x AS35TEDHRA(M1) Commercial Code: 2501322BN Power: 12000 btu/h Built-in Wi-Fi External Unit Model: Internal Unit Catalog Code: 2U50MEFFRA Commercial Code: 2502325BN Max indoor units: up to 2 indoor units Energy Efficiency: SEER : 6.5 SCOP : 4.1 Energy Efficiency Class in Cooling: A++ Energy Efficiency Class in Heating: A+ Annual energy consumption in Cooling: 269 kWh/a Annual energy consumption in heating: 1645 kWh/a Performance: Cooling capacity : 5.0 kW Heating capacity: 5.2 kW Std Cooling Absorption: 1.43 kW Std Heating Absorption: 1.40 kW Sound power level: 63 dB(A) Sound pressure level: 53 dB(A) Characteristics: Power supply (V/Hz/Φ) : 220~240/50/1 Refrigerant gas: R-32 Guaranteed temperature range: - Cooling: -10° ~ 43° C - Heating: -15° ~ 24° C Installation Data: Liquid Pipe Diameter: 6.35mm (1/4") x2 Gas pipe diameter: 9.52 mm (3/8") x2 Maximum length of pipes: 30 m Maximum height difference between internal unit and external unit: 15 m Dimensions: External Unit Dimensions (WxDxH): 800x275x553 mm External Unit Weight: 36.0 Kg R-32 Multisplit Haier Earth, home to all. Let's protect it! Compared to 100 years ago, the global temperature has increased by almost 0.5°C (from 1981 to 1990 +0.48°C). Global warming has attracted the attention of all countries, the main cause of the increase in temperature is the release of greenhouse gases into the atmosphere. To remedy the situation, the Montreal Protocol was signed in 1987 and the Kyoto Protocol in 1997. In 2009, the European Union introduced the F-Gas regulation and approved in December 2013. The new rules come into force in May 2014 and January 2015. Without the rules indicated by the F-Gas regulation, we would produce 150 thousand tons of CO2 per year. Refrigerant with very low environmental impact Haier offers products that comply with the requirements of European Union environmental standards. To avoid dangerous damage to the environment, Europe is working to reduce greenhouse gas emissions and improve energy efficiency. Units with R32 refrigerant contain less gas and have a lower GWP than R410A units, which have a lower impact on global warming. GWP = Global Warming Potential Global warming potential (GWP) is a measure of how much a molecule of a certain greenhouse gas impacts the greenhouse effect; the index is based on a relative scale that compares each gas with carbon dioxide, whose GWP by definition has the value 1. Each GWP value is calculated for a specific time interval. In comparison, the GWP of R32 refrigerant is equivalent to a value of 675, while the GWP of R410A refrigerant is equivalent to a value of 2088. Haier Geos Plus New Display Self-Clean Self-Clean technology freezes the humidity in the air on the exchanger. The ice formed retains all the impurities, dust and bacteria that had settled on the surfaces. The subsequent defrosting phase causes the ice, as it melts, to drag the impurities with it towards the drain, leaving the exchanger clean and ensuring excellent quality of the outgoing air. If the evaporator is not cleaned regularly, the accumulated dirt reduces the heat exchange by 15/30% and also encourages the proliferation of bacteria and mold. Built-in Wi-Fi With the Haier “hOn” application, you can control all the Haier appliances in your Smart Home from your smartphone or tablet, from a single app. Furthermore, through hOn , you can manage all the basic functions, purification functions and much more. The app allows the use of voice commands because it is compatible with Google Assistant and Alexa . Easy installation 1. Easy installation of the mounting jig Thanks to detailed instructions, the mounting jig can be installed quickly and easily. 2. Easy clip Easier to install thanks to the additional support clip, which increases the working space. 3. More space for piping reduces installation time by increasing operating space for easy access to piping and electrical connection area. Sleep function Haier has designed a program for the night function of the air conditioner to ensure maximum comfort without wasting energy. In heating mode, the temperature will be set 2°C lower during the first hour and another 2°C during the second hour than the set temperature. After 2 hours it will increase by 1°C and the temperature will remain constant for 6 hours before the unit turns off. In cooling mode , the temperature will be set 1°C higher during the first hour and then 1°C higher during the second hour than the set temperature. After that, the temperature will remain constant for 6 hours before the unit turns off. Intelligent Air This function automatically orients the deflectors to best distribute the flow depending on the set mode. In cooling mode, the deflectors direct the air flow upwards. The cold air tending downwards will decrease the temperature of the room evenly and rapidly. In heating mode, the deflectors direct the air flow downwards. The warm air tending upwards will increase the temperature of the room evenly and rapidly. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.
€925,00
MITSUBISHI ELECTRIC Mitsubishi Electric Dual Split Inverter Air Conditioner Msz-Bt 9+9 Series With Mxz-2f42vf R-32 Wi-Fi Optional 9000+9000
Technical features Indoor units Model: Internal Unit Catalog Code : 2x MSZ-BT25VG Power : 9000 Btu Cooling Capacity : 2.5 kW Heating Capacity : 3.15 kW Treated Air : 4,0 ~ 11,9 m 3 /min Sound pressure level : 19~43 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 280x838x235 mm Indoor Unit Weight: 9.0 kg Wi-Fi Optional ( MAC Code-567IF-E ) Outdoor Unit Model: Catalog code Outdoor Unit : MXZ-2F42VF2/3 Max indoor units: up to 2 indoor units Energy efficiency: SEER: 8.69 SCOP: 4.6 Energy Efficiency Class in Cooling : A+++ Heating Energy Efficiency Class: A++ Annual energy consumption in Cooling : 169 kWh/a Annual energy consumption in Heating : 974 kWh/a Performance: Cooling Capacity: 4.2 kW Heating Capacity: 4.5 kW Cooling absorption: 0.98 kW Heating absorption: 0.88 kW Sound power level : 59 dB(A) Sound pressure level : 44~50 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -10° ~ 46°C - Heating: -15° ~ 24° C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 30 m Maximum height difference Indoor Unit / Outdoor Unit: 15 m Dimensions: External Unit Dimensions (HxWxD): 550x800x285 mm Weight of Outdoor Unit: 37.0 Kg Multi-split DC Inverter The Inverter system is an electronic device that allows the speed of the compressor to be varied efficiently and, consequently, the power supplied by the air conditioner, based on the cooling or heating demand. Compared to traditional fixed speed (On/Off) air conditioners, inverter air conditioners reach the required temperature sooner and keep it stable, without annoying sudden changes, to the full advantage of comfort and electricity consumption. High seasonal efficiency Operating economy is the great advantage of Mitsubishi Electric air conditioners. Thanks to the DC Inverter regulation system and the careful design of the components used, energy efficiency reaches extraordinary levels. The entire range of multi-split air conditioners (MXZ-D) achieves high efficiency values even on a seasonal basis. Maximum Silence for Maximum Comfort The DC Inverter multisplit units are characterized by the very low noise level emitted. By activating the silent mode, this level can be further reduced automatically when the demand is lower (e.g. during the night in cooling mode). Efficiency Thanks to careful planning and the introduction of R32 refrigerant, the efficiency of the new multi-split outdoor units is significantly increased, reaching class A+++ in cooling (sizes 2F42,2F53,3F54) and A++ (sizes 2F42,2F53,3F54) in heating. Connectivity The extraordinary connectivity available with the new external units allows to satisfy every need. The MXZ-F unit demonstrates all-round versatility , being connectable to most of the indoor unit range of the Residential and Commercial Line, whether they are wall mounted, ceiling cassette or ducted. Quietness The new MXZ-F multisplit outdoor units reach a new level of operating silence, reducing the sound emission by up to 4dB compared to the previous model in cooling mode and up to 3dB in heating mode. R32: reduced environmental impact Thanks to the use of R32 refrigerant and a reduced pre-charge of the units compared to the previous model, the MXZ-F units introduce a significantly lower quantity of equivalent tons of CO2 into the environment. Automatic noise reduction mode By setting this function, it is possible to automatically decrease the noise level of the external unit as the internal loads to be satisfied decrease, such as for example during night cooling. Auto-correct links It is enough to press a button (MXZ-3E/F to MXZ-6D) or activate only one indoor unit (MXZ-2E/F) to ensure the correct connection between indoor and outdoor units. In the event of a connection error, the system will automatically correct it Mitsubishi Electric MSZ-BT series High efficiency Energy efficiency, simplicity and silence are the distinctive features of this series of wall-mounted air conditioners with DC Inverter technology. The clean and linear design, the possibility of connection with multisplit make this series suitable for any application, be it a home, an office or a small commercial establishment. Operating economy is the great advantage of the Mitsubishi Electric MSZ-BT series air conditioners. Thanks to the careful design of all components and the use of cutting-edge technologies, MSZ-BT reaches Class A++ in cooling and heating. MELCloud Integrated The new MSZ-BT offers the user experience of MELCloud integrated into the machine. Ready to be configured and used, it allows the user to remotely manage all the air conditioner functions thanks to the Wi-Fi controller. Silent operation The sound emission of the indoor unit is only 19dB when operating at minimum speed, guaranteeing maximum acoustic comfort inside the room. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.663,00
Midea Midea Dual Split Inverter Air Conditioner Prime 9+12 Series With M2og-14hfn8-Q R-32 9000+12000
ATTENTION ! Offer valid until stocks last Technical features Indoor Units 1) Model Internal Unit Catalog Code: 1x MA2-09NXD0-I Power : 9000 Btu Cooling Capacity: 2.64 kW Heating Capacity: : 2.93 kW Air flow: 7.7 m 3 /min Sound Power Level : 53 dB(A) Sound pressure level : 21~26~30~36dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x285x205 mm Indoor Unit Weight: 7.9 Kg 2) Model Internal Unit Catalog Code: 1x MA2-12NXD0-I Power : 12000 Btu Cooling Capacity: 3.52 kW Heating Capacity: : 3.81 kW Air flow: 8.3 m 3 /min Sound Power Level : 53 dB(A) Sound pressure level : 22~28~34~38dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x285x205 mm Indoor Unit Weight: 7.9 Kg Outdoor Unit Outdoor Unit Catalog Code: M2OG-14HFN8-Q Connectable Indoor Units : 2 Energy efficiency: SEER : 6.8 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 211 kWh/a Annual energy consumption in Heating : 1295 kWh/a Performance: Cooling Capacity: 4.10 kW Heating Capacity: 6.60 kW Cooling Absorption: 1270 W Heating absorption: 1770 W Sound power level : 64 dB(A) Sound pressure level : 57 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (WxHxD): 800x554x333 mm Weight of Outdoor Unit: 31.6 Kg Midea PRIME Sophisticated design The design of the First range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Speed linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values 1-100%. Gear function The GEAR function allows you to adjust the maximum rotation speed of the compressor by limiting its capacity to 75% and 50% of the nominal value, improving efficiency supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Follow me The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a precise reading even when changing rooms. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€648,00
Midea Midea Dual Split Inverter Air Conditioner Prime 9+9 Series With M2og-14hfn8-Q R-32 9000+9000
ATTENTION ! Offer valid until stocks last Technical features Indoor Units Model Internal Unit Catalog Code: 2x MA2-09NXD0-I Power : 9000 Btu Cooling Capacity: 2.64 kW Heating Capacity: : 2.93 kW Air flow: 7.7 m 3 /min Sound Power Level : 53 dB(A) Sound pressure level : 21~26~30~36dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (WxHxD): 805x285x205 mm Indoor Unit Weight: 7.9 Kg Outdoor Unit Outdoor Unit Catalog Code: M2OG-14HFN8-Q Connectable Indoor Units : 2 Energy efficiency: SEER : 6.8 SCOP : 4 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 211 kWh/a Annual energy consumption in Heating : 1295 kWh/a Performance: Cooling Capacity: 4.10 kW Heating Capacity: 6.60 kW Cooling Absorption: 1270 W Heating absorption: 1770 W Sound power level : 64 dB(A) Sound pressure level : 57 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Guaranteed temperature range: - Cooling: -15° ~ 50°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (WxHxD): 800x554x333 mm Weight of Outdoor Unit: 31.6 Kg Midea PRIME Sophisticated design The design of the First range is made up of pure and simple geometries. The lines that accompany the body, both frontally and on the sides, recall the waves of the ocean. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Hassle-free installation • Long piping length and height difference • Sturdy installation plate suitable for application on pre-arrangement boxes • Up to 10 minutes of time saved with each installation Simple connection The space between the wall and the body is very large and allows you to house the pipes in a comfortable and simple way. The solidity of the fixing hooks of the chassis to the plate guarantees perfect adhesion of the product to the wall. Speed linear regulation The rotation speed of the internal fan, beyond the usual predefined levels of activity, can be adjusted within the values 1-100%. Gear function The GEAR function allows you to adjust the maximum rotation speed of the compressor by limiting its capacity to 75% and 50% of the nominal value, improving efficiency supercool The First series uses high-frequency start-up technology, capable of generating a very high flow of fresh air in an extremely short time (about 30 seconds). Follow me The room temperature can be detected by a special sensor placed in the infrared control, in order to obtain a precise reading even when changing rooms. Diamond Design Innovative diamond cut shape with no sharp edges and no visible screws. The air outlet grille contains a newly designed fan to minimize noise. Anti-corrosion Thanks to a special anti-corrosion treatment, the heat exchanger of the external unit is made resistant to salt air and external pollutants/atmospheric agents. Functions and Features • ECO function : Allows electricity savings of up to 60% in 8 hours compared to traditional air conditioners. • 1W Stand-by : Complete removal of the power supply to the outdoor unit during a prolonged stand-by phase • Eco-friendly R32 • Emergency function • Quietness • Leak alarm Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€705,00
HAIER Haier Air Conditioner Dual Split Inverter Series Tundra Green 9+12 With 2u40ceffra R-32 Class A/A 9000+12000
AIR CONDITIONER HAIER DUAL SPLIT INVERTER series TUNDRA GREEN 9+12 with 2U40CEFFRA R-32 Class A/A 9000+12000 INDOOR UNIT Model: Indoor unit catalog number: 1x AS25TAAHRA Technology: INVERTER Color: WHITE Performance: Rated cooling power output: 2.6 kW Power output Nominal heating: 3.4 kW Treated air volume: 500 m³ Indoor Unit Sound Power: 53 dB Sound pressure dB(A) 36/33/29/21 Dimensions WxDxH mm 820x195x280; 8.8 kg Model: Indoor unit catalog number: 1x AS35TAAHRA Technology: INVERTER Color: WHITE Performance: Rated cooling power output: 3.6 kW Power output Nominal heating: 4.2 kW Treated air volume: 500 m³ Internal Unit Sound Power: 55 dB Sound pressure dB(A) 37/34/30/22 Dimensions WxDxH mm 820x195x280; 8.8 kg OUTDOOR UNIT Model: Indoor unit catalog code: 2U40CEFFRA Energy efficiency: SEER/SCOP (W/W): 5.1/3.8 Energy Efficiency Class (cooling): A Energy Efficiency Class (heating): A Annual energy consumption1 kWh/per cooling: 261 Annual energy consumption1 kWh/per heating: 1216 Performance: Nominal cooling capacity (kW): 3.8 Nominal heating capacity (kW): 4.1 Power absorbed in cooling (kW): 1.22 Absorbed power in heating (kW): 1.17 Min-max outdoor unit sound pressure (dB-A): 46/51 Nominal sound power dB(A): 60 Treated air volume m³/h 1900 Sound power dB(A) 62 Sound pressure dB(A) 54 Characteristics: Power supply (V/Hz): 230/50/1 Refrigerant gas : R32 Guaranteed operating range: - Cooling °C: -10~46 - Heating °C: -15~24 Dimensions: o L x D x H (mm): 810x288x688 ; 43kg TUNDRA GREEN R32 Haier introduces the new Tundra Green inverter wall air conditioner with R32 refrigerant gas. In accordance with the objectives of the European legislation on greenhouse gas emissions and the demands of improving energy efficiency, Haier has invested in Research and Development to provide modern solutions for air conditioning. Today the R32 range is implemented with monosplit and multisplit solutions. Advantages of R32 gas Compared with traditional R410A gas, the potential GWP level of R32 is about 1/3 less. (GWP is 675 for R32 vs 2088 for R410A). As a single refrigerant component, R32 is also easy to recycle and reuse. There are no concerns about splitting and splitting as R32 is not a gas mixture. MAIN FEATURES: Superquiet: with the Super Quiet setting the level of only 21 dB(A) is reached Intelligent Air: this function automatically directs the deflectors in order to best distribute the flow according to the set mode Sleep function: Haier has designed a program for the night function of the air conditioner to ensure maximum comfort without wasting energy Energy saving and high efficiency compressor Self-cleaning exchanger: helps to keep the heat exchanger clean from mould, dust, etc… Wi-Fi Optional Allows you to set the air conditioner remotely Features list On-off card 180° AD DC motor Sleep function 6 Ventilation Speeds intelligent air Smart Defrosting Auto Mode Auto vertical flow Self-cleaning exchanger Reversible Condensate Drain Display tests Auto Restart Blue-Fin Easy Clean Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€784,00
MITSUBISHI ELECTRIC Air Conditioner Mitsubishi Electric Dual Split Inverter Series Kirigamine Style Msz-Ln 9000 Pearl White + 9000 Onyx Black With Mxz-2f33vf R-32 Integrated Wi-Fi 9+9
Technical features Indoor units 1) Model: Indoor Unit Catalog Code : 1x MSZ-LN25VGV Power : 9000 Btu Cooling Capacity : 2.5 kW Heating Capacity : 3.2 kW Treated Air : 4,0 ~ 14,4 m 3 /min Sound Power Level : 58 dB(A) Sound pressure level : 19~45 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 307x890x233 mm Indoor Unit Weight: 15.5 kg Integrated Wi-Fi 2) Model: Internal Unit Catalog Code : 1x MSZ-LN25VGB Power : 9000 Btu Cooling Capacity : 2.5 kW Heating Capacity : 3.2 kW Treated Air : 4,0 ~ 14,4 m 3 /min Sound Power Level : 58 dB(A) Sound pressure level : 19~45 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 307x890x233 mm Indoor Unit Weight: 15.5 kg Integrated Wi-Fi Outdoor Unit Model: Catalog code Outdoor Unit : MXZ-2F33VF2/3 Max indoor units: up to 2 indoor units Energy efficiency: SEER : 6.13 SCOP : 4.0 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 188 kWh/a Annual energy consumption in Heating : 908 kWh/a Performance: Cooling Capacity: 3.3 kW Heating Capacity: 4.0 kW Cooling absorption: 0.85 kW Heating absorption: 0.91 kW Sound power level : 60 dB(A) Sound pressure level : 49~50 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -10° ~ 46°C - Heating: -15° ~ 24° C Installation data: Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 20 m Maximum height difference Indoor Unit / Outdoor Unit: 10 m Dimensions: External Unit Dimensions (HxWxD): 550x800x285 mm Weight of Outdoor Unit: 33.0 Kg Multi-split DC Inverter The Inverter system is an electronic device that allows the speed of the compressor to be varied efficiently and, consequently, the power supplied by the air conditioner, based on the cooling or heating demand. Compared to traditional fixed speed (On/Off) air conditioners, inverter air conditioners reach the required temperature sooner and keep it stable, without annoying sudden changes, to the full advantage of comfort and electricity consumption. High seasonal efficiency Operating economy is the great advantage of Mitsubishi Electric air conditioners. Thanks to the DC Inverter regulation system and the careful design of the components used, energy efficiency reaches extraordinary levels. The entire range of multi-split air conditioners (MXZ-D) achieves high efficiency values even on a seasonal basis. Maximum Silence for Maximum Comfort The DC Inverter multisplit units are characterized by the very low noise level emitted. By activating the silent mode, this level can be further reduced automatically when the demand is lower (e.g. during the night in cooling mode). Efficiency Thanks to careful planning and the introduction of R32 refrigerant, the efficiency of the new multi-split outdoor units is significantly increased, reaching class A+++ in cooling (sizes 2F42,2F53,3F54) and A++ (sizes 2F42,2F53,3F54) in heating. Connectivity The extraordinary connectivity available with the new external units allows to satisfy every need. The MXZ-F unit demonstrates all-round versatility , being connectable to most of the indoor unit range of the Residential and Commercial Line, whether they are wall mounted, ceiling cassette or ducted. Quietness The new MXZ-F multisplit outdoor units reach a new level of operating silence, reducing the sound emission by up to 4dB compared to the previous model in cooling mode and up to 3dB in heating mode. R32: reduced environmental impact Thanks to the use of R32 refrigerant and a reduced pre-charge of the units compared to the previous model, the MXZ-F units introduce a significantly lower quantity of equivalent tons of CO2 into the environment. Automatic noise reduction mode By setting this function, it is possible to automatically decrease the noise level of the external unit as the internal loads to be satisfied decrease, such as for example during night cooling. Auto-correct links It is enough to press a button (MXZ-3E/F to MXZ-6D) or activate only one indoor unit (MXZ-2E/F) to ensure the correct connection between indoor and outdoor units. In the event of a connection error, the system will automatically correct it Mitsubishi Electric MSZ-LN Series Kirigamine Style For your luxury Elegant design Handcrafted paint technology creates a refined design, giving the finish rich color and a high-quality feel. The new wall-mounted indoor units of the MSZ-LN series combine elegant and refined design with unparalleled performance. The new benchmark for air quality and distribution, for silence and efficiency has arrived! Air distribution The totally revolutionary geometry of the double deflector guarantees optimal air distribution; it is possible to independently direct the outgoing air flows from the right and left side of the unit. The double flaps work independently, distributing pleasant air flows to people in the room. Personal comfort The i-see sensor 3D infrared sensor uses advanced technologies to offer personalized comfort by monitoring the temperature of the room. 3D i-see sensor The 3D i-see sensor presence sensor, integrated in the MSZ-LN units, has new functions compared to the one installed in the Kirigamine MSZ-FH series for an increase in indoor comfort. Thanks to the new implementations, not only is it possible to direct the flow directly/indirectly, but functions are available that "learn" the habits of the occupants and optimize the efficient and comfortable operation of the unit. The even airflow function, for example, "records" the occupancy profile of the room, creating a mapping that allows the most frequented areas to be optimally air-conditioned based on history. Silent operation Environmental comfort is also linked to the sound level and is especially important in bedrooms or studios. The Kirigamine line allows you to guarantee the ideal climate all year round with a sound level that is virtually imperceptible to the human ear. The 19dB(A)2 achieved by the Kirigamine Style model is quieter than the noise generated by leaves rustling in the wind, making the air conditioner effectively inaudible to the occupants of the room. This is why Kirigamine Style is particularly suitable for domestic environments such as bedrooms and living areas, where we spend most of our time and carry out our daily activities. Healthy environment Mitsubishi Electric's exclusive coating prevents the accumulation of dust and grease. Advanced filtration The MSZ-LN units' Quad Plus Plasma filtration system achieves a new record in the level of air cleanliness. It is in fact capable of retaining particles up to PM2.5, i.e. with a diameter of less than 2.5 μm. This distinctive feature makes the unit ideal for households particularly attentive to air quality or for installation in rooms with often compromised ambient air (e.g. rooms overlooking busy areas, in cities near production activities...) . Quad Plus Plasma This distinctive feature makes the unit ideal for households particularly attentive to air quality or for installation in environments with often compromised ambient air (e.g. rooms overlooking trafficked areas, in cities, near production activities...). Through the use of Plasma Quad Plus technology, the unit is able to eliminate bacteria and viruses thanks to a technology that exploits an electric field and a series of electric discharges through which the air introduced into the room passes. With Plasma Quad Plus technology, 99% of the bacteria present in a 25m3 room is neutralized in just 115 minutes. Dual Barrier Coating With the MSZ-LN unit, Mitsubishi Electric introduces another revolutionary technology: Double Barrier Coating. During operation, the dust and impurities introduced during the air conditioning operations are deposited on the internal components, especially the battery and fan, increasing the machine's consumption by up to 18%. With Double Barrier Coating the internal components of MSZ-LN are treated with a second protective layer which prevents the deposit of dust and impurities even after long periods of time, reducing consumption and eliminating the need for unit maintenance in relation to this problem. MELCloud - Energy consumption monitoring The ability to manage and monitor the air conditioning system remotely is a consolidated solution in the Mitsubishi Electric product range thanks to the MELCloud platform. It allows you to promptly adjust the air conditioning systems from Smartphones and Tablets via a dedicated app. The new MSZ-LN units are not only compatible with MELCloud, but are already designed incorporating the Wi-Fi interface for connection to the network, which makes them ready for the Cloud solution without the need for additional components. One of the new features that MSZ-LN is already equipped with is the ability to monitor electricity consumption via the MELCloud® application, to always have efficiency under control. Features and benefits of WiFi control On / Off Mode (Auto/Heat/Cool/Fan) Ventilation speed Programmable weekly timer Flaps angle adjustment Room temperature detection and setting Weather information of the installation location Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€1.765,00
Midea Midea Dual Split Inverter Air Conditioner Mission Pro Series 12+18 With M3of-27hfn8-Q R-32 Wi-Fi Optional 12000+18000
Midea Dual Split Inverter Air Conditioner MISSION PRO 12+18 series with M3OF-27HFN8-Q R-32 Wi-Fi Optional 12000+18000 1) Model Model: Mission Pro MSMBAU-09HRFN8 Power: 9000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 2.60 Heating capacity (kW): 2.80 Air Flow (Min-Med-Max) m3/h 240-380-440 Sound pressure (Silent-Min-Med-Max) dB(A) 19-24-31-39 Sound power (Hi) dB(A) 55 Dimensions : Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 9.52mm (3/8”) Dimensions (LPA) mm 810-200-300 ; 8.3kg 2) Model: Model: Mission Pro MSMBCU-18HRFN8 Power: 18000 btu/h Wi-Fi Optional : CE-SK 102 code Performance: Cooling Capacity (kW): 5.30 Heating Capacity (kW): 5.50 Air Flow (Min-Med-Max) m3/h 500-580-750 Sound pressure (Silent-Min-Med-Max) dB(A) 21-24-33-42 Sound power (Hi) dB(A) 58 Dimensions: Connection tube (liquid): 6.35mm (1/4”) Connection tube (gas): 12.7mm (1/2”) Indoor Unit (LPA) mm 980-225-325 ; 10.7kg Outdoor Unit Model: Catalog number: M3OF-27HFN8-Q Gases: R-32 Max indoor units that can be combined: 3 Power (V/Hz/Φ) : 220~240/50/1 Capacity: - Cooling down Nominal Capacity kW: 7.90 Absorbed power (Max): W 2430 SEER Seasonal energy efficiency: 6.1 Energy Efficiency Class: A++ Annual energy consumption KWh/A: 453 - Heating Nominal Capacity kW: 8.02 Absorbed power (Max): W 2160 SCOP Seasonal energy efficiency (W/W): 4.0 Energy Efficiency Class: A+ Annual energy consumption KWh/A: 1855 Performance: Outdoor Unit Air Flow: m3/h 2700 External Unit Sound Pressure Max (dB(A)): 54 Sound power (Max) dB(A): 67 Liquid Side Pipe mm 6.35 (X3) Gas Side Pipe mm 9.52 (X3) Cooling/Heating operation range (°C): -15°~50°/-15°~24° Operating limit temperature (Tol) °C -15 Dimensions: Outdoor Unit (LxWxH) (mm): 845-363-702 ; 51.1Kg Max. Total length/ each IU m 60/30 Piping length (min per unit): 3 m Max. height difference (each IU) m 10 MIDEA Multi Line The range of Midea MULTI systems is one of the most complete and extensive on the market, and covers all the user's installation needs, starting from Dual systems up to Penta combinations. The depth of the range also extends to the indoor units, available in all the main categories, such as Split, Ducted, 4-way cassettes, and Floor consoles: all air conditioning systems characterized by very high efficiency, both in cooling and in heating mode. To broaden the scenario of possible installations, all the Midea MULTI Line is " Free Match ": internal units of different types can be connected to each outdoor unit Relevant Features: "Diamond" outdoor unit Midea outdoor units are made with the innovative diamond cut shape, with no sharp edges and no visible screws on the front panel. The air expulsion grille, inspired by the Archimedean screw, contains a newly designed fan to reduce noise to a minimum. The T-shaped rib on the top panel achieves greater strength and stability High efficiency HSS compressors The compressors used by Midea are characterized by a robust and reliable structure designed to operate at high temperatures and pressures in order to ensure maximum reliability over time. Facilitated installation MULTI Midea condensing units allow the connection of up to 5 indoor units of any type. Each individual indoor unit can be controlled totally independently. Energy saving Precise control of the inverter sine wave and active PFC technology guarantee minimum energy absorption and the maximum level of silence The Midea group was among the first companies to introduce the use of low GWP (Global Warming Potential) index refrigerants in its products to counter the effects of atmospheric overheating and the dreaded «Greenhouse Effect» - Low GWP index Thanks to the reduced value of the GWP index (675), the R32 refrigerant is characterized by CO2 equivalent emissions significantly lower than those of other HFC refrigerants. - Energy saving Comparative tests show that, under equal conditions, the new R32 refrigerant guarantees a specific efficiency of 2% higher than R410A - Simplicity of Installation Midea has developed a range of indoor units that can be applied both to outdoor units that use R32 refrigerant and to outdoor units that use R410A refrigerant. In this way, warehouse logistics and the association of indoor and outdoor units are very simple and intuitive. MIDEA MISSION PRO The geometries used for the splits of the MISSION PRO range are pure and simple to the eye. The lines that accompany the body, both frontally and on the sides, recall those formed by ocean waves. A real work of art, enhanced by the presence of a display ingeniously hidden under the front plastics, which is revealed to the user only when the unit is switched on. Superior Performance Inverter 4 The exclusive QuattroTM Inverter technology allows excellent performance in all conditions of use, making the Midea Inverter compressor one of the best AC compressors in the world. In all conditions, Midea Inverter compressors work powerfully, efficiently, quickly and constantly Maximum efficiency - The step-less linear modulation of the compressor makes it possible to adapt the rotation speed, and therefore the capacity supplied, to the environmental conditions in an extremely precise manner. The compressor perfectly adapts its rotation speed to the needs of the system without waste and with maximum efficiency. Linear regulation - The internal fan speed is user selectable in a linear fashion between 1% and 100% instead of being available in 4 or 5 levels. In this way it is possible to make the product deliver the most congenial air flow to your needs, for maximum comfort. Less Noise - The speed of the external fan adapts to the external temperature conditions and to the working modes of the product, to ensure less noise and maximum efficiency Better Comfort - The temperature that can be set on the products is managed at intervals of 0.5°C. In this way it is possible to find the most correct temperature setting for your well-being. Do Not Disturb function By pressing a button on the remote control it is possible to silence all acoustic alarms, turn off the display of the indoor unit and reduce the speed of the indoor fan to a rotation speed lower than the minimum, normally selectable iECO function This function allows you to limit the rotation frequency of the compressor to reduce the capacity supplied and significantly increase the specific efficiency of the product during use in cooling mode GEAR function The Mission PRO units are equipped with the Gear function which makes it possible to limit the maximum rotation speed of the compressor and the consequent capacity supplied, significantly improving the specific efficiency of the product. The display of the internal unit is able to show, in addition to the selected temperature, also the room temperature and the instantaneous electrical power absorbed during operation Follow me function Select this function and the special sensor located in the infrared control will detect the ambient temperature around you, and then adjust the operation of the air conditioner according to your needs Other features of the series Self-diagnosis In the event of a breakdown, a system of fault codes allows users to report defects in a simple and clear way in order to quickly activate the assistance service. 1W Stand By The internal units, in the event of a prolonged stop, completely remove the power supply to the external unit, decreasing the electricity consumption in the Stand By phase. Refrigerant leak alarm If the temperatures of the refrigerant circuit are irregular due to refrigerant gas leaks, a specific fault code (EC) allows to identify this condition. Integrated Midea Smart Kit The indoor units of the MISSION-PRO series are equipped with the Smart Kit system to be managed by a dedicated APP via WLAN connection. Condensation control The MISSION-PRO units can work in cooling mode even with a low outside temperature to air-condition technical rooms. Hydrophillic Aluminum The heat exchanger of the outdoor unit is treated with a special coating to improve resistance to weathering corrosion. Mono and Multi Split Multipurpose Indoor Units The MISSION-PRO indoor units can be connected to the outdoor units for Mono Split (R32) or to the outdoor units of the multi range (R410A). Wi-Fi Control (Optional) Thanks to the presence of a special Smart Kit and the App available for both iOS and Android applications, it is possible to control the operation of Midea air conditioners in any situation: using the remote control, or directly from a smartphone. Furthermore, the App has been designed to offer even more functionality and ease of use Midea Air allows you to use some exclusive functions. Smart diagnosis Thanks to the diagnostic program present in the application, the reference values of over 100 operating parameters present in the product can be verified to evaluate the correct functioning of the system peripherals. Weekly timer The switching on and off of the product can be set on a weekly basis from the App to program the use of the product even remotely Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase
€1.125,00