AIR CONDITIONER FUJI DUAL SPLIT INVERTER LM series 7+9 with ROG14L 7000+9000 INTERNAL UNIT 1)Model Product Code: RSG 07 LMC Power supply: 230/1/50 Sound pressure (Cooling-Heating) H/M/L/Q: 36/32/29/21 dB(A) Sound power (Cooling-Heating): 51 Air flow: 560/500/430/310 Dimensions: 268x840x203 ; 8.5 Kg 2)Model Product Code: RSG 09 LMC Power supply: 230/1/50 Sound pressure (Cooling-Heating) H/M/L/Q: 37/33/29/21 dB(A) Sound power (Cooling-Heating): 52 Air flow: 600/520/430/310 Dimensions: 268x840x203 ; 8.5 Kg EXTERNAL UNIT Model: ROG14L Max. External Units that can be combined: 2 Nominal capacity (Cooling-Heating): 4.0 - 4.4 Performance: Sound pressure (Cooling-Heating): 47-49 dB(A) Sound Power (Cooling-Heating): 61-63 dB(A) Electrical Data Power supply V/Ø/Hz: 230/1/50 Dimensions: Liquid-Gas Pipe Connections: 6.35 / 9.52 Maximum difference in height: 10 m External Unit Dimensions: 540x790x290 37 Kg MULTISPLIT INVERTER TECHNOLOGY Well-being in every room; By distributing different indoor units in the various areas of the home, the desired temperature is reached homogeneously. Fuji Electric Multisplit Inverter systems can combine from 2 to 8 indoor units with a single outdoor unit, thus, in addition to offering great versatility of placement, the external aesthetics of the home is prevented from being modified. Energy saving: The use of the DC compressor and fan increases the efficiency of the air conditioners and at the same time guarantees lower electricity consumption. Elegant indoor units: Fuji Electric has a wide range of elegantly designed indoor units ranging from 2 to 7 kW. The ultra-thin Slim ducted units measuring only 198 mm in height have a condensate lifting pump as standard and the Auto Louver Group Kit as an accessory. The best performance on the market This range equipped with the latest Inverter technology allows you to achieve high energy efficiency values: great comfort and energy savings. Maximum flexibility The indoor units can operate individually or simultaneously. Combinations of 2 high-power indoor units can also be achieved with 3x1 and 4x1 outdoor units. Easy installation Thanks to the possibility of reaching considerable lengths for the pipes, the outdoor units can be installed almost anywhere. INTERNAL UNITS Elegant and compact internal units (LU, LM and LF models) Equipped with an antibacterial filter and a catechin filter, they guarantee greater energy efficiency: all 2x1 combinations are in class A and have a very low noise level. WALL SPLIT INVERTER LM series Cutting-edge design and compact dimensions: The internal units have compact dimensions, only 203 mm deep, and allow both greater energy savings and easy maintenance thanks to the removable and washable front. “Low Noise” function for the external unit It is activated from the remote control and allows you to further reduce the noise level of the external unit. Maximum comfort at home: Low energy consumption, optimal performance and cleanliness are what characterize the Fuji Electric Split Inverter range. These features allow you to make the most of your home environments. Compact and elegant design With its compact and elegant design, the Slide becomes a decorative furnishing object, as well as ensuring a high level of comfort with the greatest energy savings. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical Features Internal Units 1) Model Internal Unit Catalog Code: 1x ASYG07KGTB Internal Unit Code: 3NGF7091 Power: 7000 btu/h Cooling Capacity : 2.0 kW Heating capacity: 2.5 kW Indoor Unit Air Flow Rate: 650 m3 /h Sound Power Level : 54~56 dB(A) Sound pressure level : 21~38 dB(A) Liquid Pipe Diameter: 6.35mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 270x834x215 mm Internal Unit Weight: 10 Kg Wi-Fi Optional: (Code UTY-TFSXW1 ) 2) Model Internal Unit Catalog Code: 1x ASYG09KGTB Internal Unit Code: 3NGF7092 Power: 9000 btu/h Cooling Capacity : 2.5 kW Heating capacity: 2.8 kW Indoor Unit Air Flow Rate: 700 m3 /h Sound Power Level : 55~57 dB(A) Sound pressure level : 21~40 dB(A) Liquid Pipe Diameter: 6.35mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 270x834x215 mm Internal Unit Weight: 10 Kg Wi-Fi Optional: (Code UTY-TFSXW1 ) External Unit Model: Indoor Unit Catalog Code: AOYG18KBTA2 Max indoor units: up to 2 indoor units Energy Efficiency: SEER:8.6 SCOP:4.7 Energy efficiency class cooling:A+++ Heating energy efficiency class: A++ Performance: Cooling capacity : 5.0 kW Heating capacity: 5.60kW Cooling sound power level: 60 dB(A) Heating sound power level:62 db(A) Sound pressure level: 47 dB(A) Heating sound pressure level: 50db(A) Characteristics: Power supply (V/Hz/Φ) : 230/50/1 Refrigerant gas: R-32 Liquid Pipe Diameter: 6.35mm (1/4") x2 Gas pipe diameter: 9.52 mm (3/8") x2 Guaranteed temperature range: - Cooling: -10° ~ 46°C - Heating: -15° ~ 24°C Dimensions: External Unit Dimensions (HxWxD): 632×799×290 mm External Unit Weight: 37 Kg Fujitsu KG series Comfortable ventilation and quiet operation The large baffle and new diffusion structure allow for comfortable airflow that spreads wider to the user's feet and quiet operation. Motion sensor The motion sensor detects the presence of people in a room, causing the air conditioner to reduce its power when people leave the room. When people return to the room, the air conditioner automatically returns to its previous operating mode. Functions Presence sensor The sensor detects the presence of people inside the room Automatic ventilation speed Automatically changes the ventilation speed according to the required temperature in the room Automatic Restart In the event of a temporary power failure, the air conditioner automatically restarts when the power returns. 10°C HEAT 10°C is the minimum attenuation temperature that can be set in heating Automatic cold/hot switching By comparing the room temperature and the set temperature, the air conditioner automatically activates heating or cooling. Maximum Power Function that allows you to activate the air conditioning at maximum power to quickly achieve comfort Daily Timer Four possible selections within 24 hours ON, OFF, ON OFF or OFF ON Automatic Sleep Switch-off Night-time comfort is guaranteed by the gradual regulation of the temperature before the programmed switch-off of the air conditioner Weekly timer ON-OFF functions can be set freely on a daily and weekly basis Filter status indicator Allows you to check the cleanliness of the filters High energy saving High-tech components: DC technology is used for the compressor, internal/external fan motor and inverter control Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Indoor unit 1) Model: Indoor unit catalog number : 1x GWH07AGB-K6DNA1B/I Power : 7000 Btu Cooling Capacity: 2.1 kW Heating Capacity: 2.6 kW Treated Air Indoor Unit : 280~480 m 3 /h Sound Power Level : 34~55 dB(A) Sound Pressure Level : 21~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 260x779x185 mm Indoor Unit Weight: 8 Kg Integrated Wi-Fi 2) Model: Indoor unit catalog code : 1x GWH09AGB-K6DNA1B/I Power : 9000 Btu Cooling Capacity: 2.7 kW Heating Capacity: 2.80 kW Treated Air Indoor Unit : 280~550 m 3 /h Sound Power Level : 34~55 dB(A) Sound Pressure Level : 21~40 dB(A) Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 9.52 mm (3/8") Internal Unit Dimensions (HxWxD): 260x779x185 mm Indoor Unit Weight: 8 Kg Integrated Wi-Fi Outdoor unit Model: Indoor Unit catalog code: GWHD(14)NK6OO Max indoor units: up to 2 indoor units Energy efficiency: SEER: 6.5 SCOP : 4.0 Energy Efficiency Class in Cooling : A++ Heating Energy Efficiency Class: A+ Annual energy consumption in Cooling : 220 kWh/a Annual energy consumption in Heating: 1330 kWh/a Performance: Cooling Capacity: 4.1 kW Heating Capacity: 4.4 kW Absorption in cooling: 1.1 kW Heating absorption: 0.98 kW Sound power level : 62 dB(A) Sound Pressure Level : 50~52 dB(A) Characteristics: Power (V/Hz/Φ) : 220~240/50/1 Refrigerant gas : R-32 Guaranteed temperature range: - Cooling: -15°~48°C - Heating: -15°~24°C Installation Data: Pipe diameter Liquid : 6.35 mm (1/4") x2 Gas pipe diameter : 9.52 mm (3/8") x2 Maximum piping length: 10 m Maximum piping length with additional charge: 40 m Maximum height difference between indoor units: 15 m Dimensions: External Unit Dimensions (HxWxD): 550x745x300 mm Weight of Outdoor Unit: 30.0 Kg Gree Pular Purity in Design and Comfort The finish is matte, velvet effect, the color is pure white Thanks to the use of opaque, simple and easy-to-match injection molding techniques, for a contemporary, captivating style The design is seamless The integrated double flap, completely closed, has no joints, because the details make the difference Cleanliness and linearity are the distinguishing features of the design Flowing curves and transitions, maximum simplicity, for a minimal approach, ideal for any environment Superior Comfort Advanced functions of Pular, capable of giving unprecedented comfort i-FEEL Plus The sensor on the remote control, which measures the room temperature and sends inputs to the unit to ensure the desired temperature where the remote control is placed, now has an even higher frequency of sending inputs. Every 10 minutes it connects with the unit, ensuring maximum comfort Ad hoc technology for each mode Cooling with shower air flow. Heating with flow from bottom to top. Air flow increased by 17% compared to previous ranges. Very long air throw, up to 10 m. High precision in the air delivery thanks to the double flap 3D airflow Customize your comfort thanks to the 3D SWING function. Both horizontal and vertical flaps can be individually directed via the remote control. It is possible to select the oscillation angle for both flaps Multi-speed airflow Up to 7 fan speeds from Quiet to Turbo Auto manages ventilation intelligently Sleep function with 3 options Silent modifies the set point in the following two hours Smart intelligently adjusts the set point DIY choose your personalized Sleep schedule Turbo in cold and in heat For instant comfort, bring the compressor and fans to maximum power Intelligent car mode Relax and let the climate control decide how to behave to achieve the desired comfort. For the first time, even in Auto mode it is possible to select the desired room temperature Cold air prevention In Heating, a special intelligent function allows the conditioned air to enter the room only if and when it is sufficiently heated, for maximum comfort. Save Energy Dedicated to those who want to save as much as possible, it decides the temperature independently, according to the default settings. Operation is managed automatically Intelligent auto-restart It guarantees continuity of your comfort because after a black-out the unit restarts automatically when the power is restored, keeping the last settings. Low Voltage Startup In an intelligent way, the unit starts with minimal starting, so as not to interfere with the use of other appliances Intelligent Defrosting If the cold external temperature causes the formation of ice on the condenser coil, the correct functioning of the air conditioner in hot mode requires that there is a stop of the introduction of hot air into the room to allow defrosting of the external exchanger. In this specific case, these stops are not programmed at regular intervals, but take place only if and when really necessary, guaranteeing continuity of hot air flow into the room Maximum silence With Pular you can sleep peacefully it is SUPER QUIET its sound level is record-breaking! 3 dB(A) below standard values: in Sleep mode it does not exceed 21 dB(A) TOP air quality with the COLD PLASMA PLUS Purification System Its sterilization effectiveness against bacteria is the best ever: it reaches 93%, against an average value of 80% for similar systems. It releases ions capable of neutralizing bacteria, fungi, pollen, mites and, in general, pollutants present in indoor air. Removes over 400 kinds of odors. It makes the air lighter by enriching it with negative ions Single filter accessible without any disassembly for cleaning The dust filter is external, integrated in the structure, easy to reach and to clean frequently, without having to disassemble it. The fully enclosed double flap has no joints and thus prevents dust and other pollutants from entering the unit Optional Filters Even purer air with the new optional filters, which you can apply to the standard Pular filter Anti-Bacterial Filter The structure is realized by adding the biological anti-bacterial agent on the filter net. Effectively eliminate Escherichia coli and staphylococcus, etc Tio 2 anti-bacterial deodorant filter Takes activated carbon as a carrier, mixed with titanium dioxide Mite Clear Anti-Mite Filter New anti-mite and antibacterial material and can defend or prevent the mite, to improve indoor air quality Composite filter Silver Ions, Catechin, Mite Clear Silver ions: Effectively eliminate carcinogens, such as staphylococcus, streptococcus, salmonella, etc. Catechin : Effectively sterilizes bacteria and other pollutants; prevents the causes of unpleasant odors Mite Clear : Defends against mites and effectively prevents their formation Auto-Clean Manage the cleaning of your internal drive with Pular Condensate, frost, defrost, dry You can decide to activate evaporator cleaning when you wish: with the unit off, just press two buttons on the remote control. The function will see phases of condensation, ice formation, defrosting and drying take place in sequence aimed at eliminating all residues of dust and pollutants and all traces of condensation. This will allow clean air to be introduced into the room at all times and to preserve the efficiency of the heat exchanger X-Fans The prevention of mold formation is also guaranteed by this function, which is activated simply by holding down the speed button for 2 seconds: the indoor unit fan will continue to operate, even with the unit off, for a few minutes, in order to dry perfectly the evaporator User Friendly and Smart Controlling Pular's features is a breeze . From Remote Control to Infrared Easy to use It has a minimal but technological design, a pure white, high gloss finish and is characterized by a large LCD display and easy-to-use buttons. The integrated temperature sensor is activated by pressing the IFeel key and the Light key turns off the backlighting of the LED display of the indoor unit. The wifi button allows immediate activation of the function on the remote control From a Smartphone, thanks to the integrated Wi-Fi as standard across the entire range Thanks to the very intuitive G+ App, available for download in the versions for Android and iOS systems in Google play or the App store, you can control all the functions remotely. Downloading and installing the app, connecting to the home wifi and adding the unit are very simple operations: from your office or sofa at home you can thus easily control all the air conditioning parameters. With the same app you can manage multiple units. Advanced controls It is possible to centrally manage, via BACNET (BMS) or CENTRALIZED CONTROL or SMART ZONE in combination with wired controls (1 for split units), even several units within the same building (up to 16 with SMART CONTROL - up to 36 with CENTRALIZED CONTROL, up to 255 with BACNET), as if it were a small system Programmable Wired Control Pular can also be controlled with a wired control, to be installed on the wall. It allows you to program switching on and off, select the operating mode and speed, flap position, daily timer and weekly programs Door Control Contact The on/off contact on the unit allows you to manage the switching on and off of the unit with the magnetic card for opening the entrance door (for example of a hotel room). By inserting the card, the air conditioner is activated; by removing the card, the unit switches off: in this way energy waste is avoided. Wired controller is required for this application Easy Installation Pular is built with features that facilitate installation, as well as access to parts for maintenance Easy Maintenance The electrical box and the electronic board are easy to open and remove. The self-diagnosis function, which shows errors on the indoor unit display, facilitates the identification of any malfunctions and speeds up their solution. The special design of the outdoor unit's valve cover makes it easier to access the connections. Versatility of Application Up to 5 indoor units that can be combined with multi-split outdoor units Green technology Choose the GREEN technology of GREE air conditioners: renewable energy, which therefore captures the thermal energy present in the air and transfers it where it is needed. The use of R32 refrigerant, with a low impact on global warming, makes environmental comfort even greener: there is no impact on the ozone layer and the quantity of gas required to ensure good performance is 30% lower than that of earlier gases such as R410A, due to its higher yield High Energy Efficiency and Low Consumption Inverter G10 is the latest generation DC Inverter technology that allows you to optimize performance and consumption thanks to the modulation of the compressor and fans according to the real comfort needs. In fact, as the desired temperature approaches, both the compressor and the fans of the outdoor and indoor units modulate capacity and consumption, ensuring: • rapid achievement of the desired comfort • constant maintenance of comfort conditions • precise temperature control • containment of consumption • minimization of the sound level Mono and Multi Compatible The Pular indoor unit is available for single and multi applications with nominal cooling capacity from 2.7 to 6.5 kW. The indoor unit with a capacity of 2.1 kW is dedicated to Dual, Trial and Quadri applications: possible matchings and related data will be available shortly Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Hitachi Dual Split Inverter Air Conditioner Dodai 7000+9000 series with RAM-40NE2F R-32 Wi-Fi Optional - NEW 7+9 INDOOR UNITS 1) Model Product code: RAK-18REF Power: 7000 btu Dimensions HxWxD mm 280 x 780 x 215 2) Model Product code: RAK-25REF Power: 9000 btu Dimensions HxWxD mm 280 x 780 x 215 OUTDOOR UNIT Product code RAM-40NE2F Cooling capacity (min-nom-max) kW 4.0 (1.5-4.4) Heating capacity (min-nom-max) kW 5.1 (1.5-5.5) Energy class (average climate) Cooling/Heating A++/A+ Sound pressure dBA 49/51 R-32 refrigerant gas Diameter of liquid/gas refrigerant pipes 1/4" x 2 / 3/8" x 2 Dimensions HxWxD mm 570x750x280 41 Kg DODAI F series multizone Compatible with wall-mounted indoor units of the Dodai FrostWash series (The FrostWash function can only be activated with monosplit systems) Split-type heat pump single-fan outdoor units with high-efficiency Rotary compressor High exchange surface coil, with protective treatment included Fan with wind protection High performance in heating High seasonal efficiency SEER = A++ / SCOP = A+ Hibernate function for reducing consumption in standby mode Low sound level thanks to the Vector Control function Compatible with Hi-Kumo app for remote management Compatible with MODBUS and Konnex home automation Quick and easy installation Compact size Remote control included High performance in heating Compatible with the Hi-Kumo app The Hi-Kumo app allows you to remotely turn on, turn off, change the temperature or program your air conditioner. All you need is a smartphone with internet connection to the Wi-Fi device (optional) Small dimensions, minimum overall dimensions With a width of 780 mm, Dodai FrostWash can also be installed above a door. Silent operation You can have a comfortable environment without noticing the operation of the indoor unit, thanks to its low noise level: only 19db*.*consult the model Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less