NB: THE BOILER IS BORN WITH METHANE, FOR THE TRANSFORMATION TO LPG, YOU MUST CONTACT THE AREA ASSISTANCE CENTER IN ADVANCE TO KNOW THE RELATED COSTS Chaffoteaux boiler INOA ULTRA 25 CF Open chamber low NOx cod. 3310639 - NEW ErP Technical Characteristics : Rated heat output max/min (Hi) Qn 25.8 / 11.0 kW Useful heating power max/min 23.2 / 9.8 kW Efficiency at nominal power 60/80 Hi 90.1% Efficiency at 30% of nominal power (47 Hi return) 89.9% Outlet temperature range min/max temp. 35-82°C Expansion tank capacity 8l Domestic hot water DHW comfort level (EN 13203) ** Max/min power in DHW mode 24.3 / 9.9 kW Specific flow rate in accordance with EN 625 at ΔT 30º C 11.8 l/min Hot water flow rate at ΔT 25º C 14.2 l/min Electrical data Supply voltage 230 V~ (50 Hz) Maximum absorbed power 52W Electrical protection degree IP X4D Dimensions HxWxD 745x400 x319 mm; 25 kgs INOA ULTRA 25 CF Inoa Ultra, equipped with multifunction LCD display. it contains in its simplicity all the technical characteristics necessary for optimal operation, guaranteeing reliable, practical and safe performance. Low NOx emissions: compliant with the Erp regulation of 09.26.2018 HEALTHCARE COMFORT Sanitary heat exchanger in stainless steel. Flow rate of 14.2 l/min with Δ=25°C. DHW circuit managed by two probes and a DHW flowmeter for better temperature stability based on the type of sampling. HEATING COMFORT High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Heating power of 25 kW. COMFORT OF USE AND INSTALLATION LCD display with display: history, self-diagnosis, operating temperature. Antifreeze function. Compact and perfectly adaptable to any type of home. Quick installation: predisposition for the use of the hydraulic bar (optional). Simplified maintenance: front access to all components. Prepared for integration with solar thermal systems. Prepared for on/off environmental regulation with and without wires. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

NB: LA CALDAIA NASCE A METANO, PER LA TRASFORMAZIONE A GPL BISOGNA CONTATTARE PREVENTIVAMENTE IL CENTRO ASSISTENZA DI ZONA PER CONOSCERE I RELATIVI COSTI Caldaia Chaffoteaux INOA ULTRA 25 CF Camera Aperta low NOx cod. 3310639 - NEW ErP Caratteristiche Tecniche: Potenza termica nominale max/min (Hi) Qn 25,8 / 11,0 kW Potenza utile riscaldamento max/min 23,2 / 9,8 kW Rendimento a potenza nominale 60/80 Hi 90,1% Rendimento al 30% della potenza nominale (ritorno 47 Hi) 89,9% Intervallo temperatura di uscita min/max temp. 35-82 °C Capacità vaso d’espansione 8l Acqua calda Sanitaria Livello di comfort ACS (EN 13203) ** Potenza max/min in regime ACS 24,3 / 9,9 kW Portata specifica in conformità a EN 625 a ΔT 30º C 11,8 l/min Portata acqua calda a ΔT 25º C 14,2 l/min Dati elettrici Tensione di alimentazione 230 V~ (50 Hz) Potenza massima assorbita 52W Grado di protezione elettrico IP X4D Dimensioni AxLxP 745x400 x319 mm; 25 Kg INOA ULTRA 25 CF   Inoa Ultra, dotata di display LCD multifunzione. racchiude nella sua semplicità tutte le caratteristiche tecniche necessarie per un funzionamento ottimale, garantendo prestazioni affidabili, pratiche e sicure. Basse emissioni di NOx: conforme alla normativa Erp del 26.09.2018 COMFORT SANITARIO Scambiatore sanitario in acciaio inox. Portata da 14,2 l/min con Δ=25°C . Circuito sanitario gestito da due sonde e un flussimetro sanitario per una migliore stabilità della temperatura in base al tipo di prelievo. COMFORT NEL RISCALDAMENTO Circolatore alta efficienza con modulazione continua per migliorare il comfort acustico e ridurre i consumi energetici. Potenza di riscaldamento di 25 kW. COMFORT D'USO E INSTALLAZIONE Display LCD con visualizzazione: storico, autodiagnosi, temperatura di funzionamento. Funzione antigelo. Compatta e perfettamente adattabile a qualunque tipologia di abitazione. Installazione rapida: predisposizione per l’utilizzo della barretta idraulica (opzionale). Manutenzione semplificata: accesso frontale a tutti i componenti. Predisposta per l’integrazione con sistemi solari termici. Predisposta per regolazione ambientale on/off con e senza fili. Garanzia Prodotto Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto

Read more less

 ATTENZIONE  IL SUDDETTO ARTICOLO NON INCLUDE IL BOX D'INCASSO, QUINDI, L'IMMAGINE DEL PRODOTTO HA SOLO SCOPO ILLUSTRATIVO Caldaia Chaffoteaux INOA GREEN IN 25 a Condensazione da Incasso Completa di Kit Scarico Fumi cod. 3310578 Riferimento 3310578 Classe energetica in Riscaldamento A Classe energetica in Sanitario A Profilo di carico XL Prestazioni Portata termica nominale in riscaldamento max/min (Hi) 23,5/5,5 kW Potenza utile riscaldamento max/min (80°C-60°C) Pn 23,5/5,5 kW Potenza termica max/min sanitario 22,9/5,3 kW Massima perdita di calore al mantello (ΔT = 30°C) **** Quantità istantanea di acqua calda ∆T=25°C 13,1 l/min Circuito Riscaldamento Capacità vaso di espansione 6,5 l Temperatura di riscaldamento min/max (range alte temperature) 35/82 °C Temperatura di riscaldamento min/max (range basse temperature) 20/45 °C Dati elettrici Tensione/frequanza di alimentazione 230/50 V/Hz Temperatura ambiente minima di utilizzo -15 °C Grado di protezione impianto elettrico IP X5D Dimensioni AxLxP 1140 X 590 X 240 mm 24 Kg INOA GREEN IN Inoa Green In è l’essenza della tecnologia a condensazione. Grazie all’unità da incasso in lamiera (da ordinare con codice a parte) rappresenta la soluzione ideale per recuperare spazio abitativo, garantendo comunque la praticità di utilizzo grazie all’Expert Control di serie. Scambiatore condensante in lega di alluminio. COMFORT SANITARIO Scambiatore sanitario in acciaio inox. Portata sanitaria da 12 l/min (ΔT= 30°C) secondo norma EN625. COMFORT NEL RISCALDAMENTO Rendimento fino al 108% sul PCI con risparmio energetico fino al 35%. 4 stelle di rendimento di combustione secondo la norma EN 92/42. Potenza termica utile fino a 23,5 kW. Rapporto di modulazione1:4. Emissioni inquinanti ridotte, Classe NOx 6. Circolatore alta efficienza con modulazione continua per migliorare il comfort acustico e ridurre i consumi energetici. Termoregolazione climatica di base, in funzione della temperatura esterna. Il gestore di sistema permette di settare e visualizzare la modalità di funzionamento, le temperature, autodiagnosi, informazioni di regolazione e storia ultimi guasti. COMFORT D'USO E INSTALLAZIONE Riempimento meccanico a bordo caldaia. Gestore di sistema Expert Control e sonda esterna di serie. Unità da incasso universale in lamiera elettrozincata a bagno con predisposizioni complete per scarichi fumi e collegamenti idraulici. Grado di protezione elettrica IPX5D e funzionamento garantito fino a -20°C. Predisposta per la gestione e l’integrazione di soli sistemi solari termici a circolazione naturale. Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Technical features Energy class in heating: A Energy class in sanitary: A Load profile: XL Heating performance: Thermal input (min./max): 3.7/22 kW Useful power (min./max.): 3.95/21.4 kW Useful thermal efficiency: 98.0 % Idle efficiency (60/80°C): 97.5/87.8 % Heating output max/min (80°C-60°C): 21.4/3.4 kW Performance stars (dir. 92/42/EEC): **** Healthcare performance: Thermal input (min./max): 3.7/28.9 kW DHW thermal power (max/min): 24.9/3.5 kW Heating circuit: Expansion vessel pre-charge pressure: 1 bar Maximum heating pressure: 3 bar Expansion vessel capacity: 8 L Min/max heating temperature (high temperature range): 35 / 82 °C Min/max heating temperature (low temperature range): 20 / 45 °C Healthcare circuit: Min/max domestic hot water temperature: 36 / 90 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 12.1 l/min Instantaneous quantity of hot water ∆T=25°C: 15.5 l/min Instantaneous quantity of hot water ∆T=35°C: 10.4 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Max/min domestic water pressure: 7.0 / 0.2 bar Electrical data: Protection index IPX5D Class 6 NOx Energy efficiency index of the circulator: EEI ≤ 0.23 Minimum ambient temperature of use: >0°C Total absorbed electric power: 67 W Power supply: METHANE (G20/G30) Dimensions: (HxWxD): 745x400x385mm; Weight: 29.7kg Pigma is the new CHAFFOTEAUX boiler, which is part of the Advance Range, resulting in the category leader with a completely renewed design, using the innovative SpinTech exchanger, electronic combustion control, integrated Chaffolink connectivity and Expert Control and external probe as standard, guaranteeing extremely high performance with extremely low fuel consumption. Can be installed in partially protected places. SpinTech features: Exchanger that works with a stainless steel monospiral New single coil primary heat exchanger in stainless steel Passage sections increased by 142% compared to the previous version 1 m more head Seasonal yield at 94% Class A+ thanks to the standard thermoregulation accessories Performance certified by the TÜV RHEINLAND Group. Give Comfort: Modulation ratio 1:7 Optimized internal silencer SRA function Gas transformation with kit included as standard Ready for Chaffolink connectivity Advantages: Installation in partially protected places Smoke outlets 80, 60, 50 mm Intuitive electrical connections Up to 20% energy savings in combination with Expert Control and the SRA function Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6.

Read more less

ATTENTION THE PRODUCT IS MADE TO ORDER Chaffoteaux c EU condensing boiler Methane Low NOx code 3300726 Complete with flue gas exhaust kit Technical Features Model : Pharos Zelios EU 25 Reference Code: 3300726 Maximum Heating Power: 21.5 kW Maximum Thermal Power in Sanitary: 25.3 kW Energy Efficiency Class: A ACS Declared Load Profile: XXL Nominal Heat Output in Heating: 2.5 / 22.0 kW Nominal Thermal Capacity in Sanitary: 26.0 / 2.5 kW Combustion efficiency: 97.8% Stars Performance: **** Sound Power Level: 50 dB Residual Evacuation Prevalence: 104 Pa NOx class : 5 Smoke Temperature: 62° C CO2 content: 9.3% Maximum smoke flow rate: 41.6 Kg/h Expansion vessel capacity: 12 litres Heating Temperature: 36° / 60° C Kettle capacity: 180 l/min How much Instant Hot Water : 26.9 l/min Sanitary Water Pressure: 0.3 / 7 bar Power Voltage and Frequency (V,Hz) : 230 / 50 Electrical Power Consumption: 165 W Power supply: Methane Dimensions and Weight: Dimensions (HxWxD): 2000 x 600 x 660 mm Weight: 155 Kg Pharos Zelios EU Floor-standing condensing boiler with integrated storage and solar management Pharos Zelios EU combines the performance of two cutting-edge technologies, condensation and solar thermal, to ensure maximum energy savings every day. Pharos Zelios EU is the ideal answer for combined solutions with solar systems or different heating zones both in new buildings and to replace old floor-standing boilers. Equipped with Expert Control system manager as standard • Heating • Domestic Hot Water • Single Family Home Medium Protocol • Ebus2 communication • Individual Apartment • Replacement • Renovation   Compact​ Minimum footprint: 60 cm wide and less than 0.4 m2 of occupied surface Efficient Solar hot water production that covers 50 to 65% of needs, depending on the area. Climate control combined with a modulating ACS pump optimises the condensation phenomenon, ensuring additional savings. Health Comfort A 180 litre stratified storage tank and coil heat exchange surface area: 1.5 m². 3 stars of health comfort, the maximum level foreseen by the EN 13203 standard. Up to 43.9 l/min of domestic hot water flow rate thanks to the combined performance of the boiler, solar energy and the 180-litre stratified storage tank Ease of Use and Installation Quick installation thanks to the Plug&Burn solution: boiler, storage tank and accessories for solar thermal management are integrated inside the product. System manager "Expert Control" as standard: allows complete management of solar thermal, display and regulation of all parameters. Solar probe as standard. All components for managing the solar system are integrated into the product (high-efficiency modulating solar pump, flow meter, safety valve, 18-litre expansion vessel and pressure gauge). Ready for integration into a heating system via the new Ebus2 communication protocol (boiler, solar, system management modules up to 3 circuits with different temperatures and modulating thermoregulation accessories) Energy Saving and Respect for the Environment Up to 23% energy savings in combination with the room sensor and the SRA function. 40% reduction in CO2 emissions compared to a traditional heating system. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Chaffoteaux PIGMA ADVANCE EXT 25 condensing boiler complete with methane or LPG fume exhaust kit cod. 3310577 - NEW Reference 3310577 Energy class in heating A + Energy class in sanitary A XL withdrawal profile Characteristics Nominal heat input in heating max/min (Hi) Qn 22.0 / 3.7 kW Nominal heat input in heating max/min (Hs) Qn 24.4 / 4.1 kW Nominal DHW heat input max/min (Hi) Qn 26.0 / 3.7 kW Max/min DHW nominal heat input (Hs) Qn 28.9 / 4.1 kW DHW max/min useful power Pn 24.9 / 3.5 kW Performance stars (dir. 92/42/EEC) **** DHW max/min useful power Pn 24.9 / 3.5 kW Performance stars (dir. 92/42/EEC) **** Instantaneous quantity of hot water ∆T=25°C 15.5 l/min Expansion tank capacity 8l Dimensions Dimensions (Height x Width x Depth) 766 x 505 x 240 mm PIGMA ADVANCE EXT Pigma Advance Ext is the efficient and high-performance solution for outdoors. Equipped with the innovative SpinTech exchanger and ready for connectivity, it is perfect for customers who want accessible comfort. MAXIMUM PERFORMANCE New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ thanks to the standard thermoregulation accessories. Performance certified by the TÜV RHEINLAND Group. MAXIMUM COMFORT Modulation ratio 1:7. Optimized internal silencer. SRA function. Gas transformation with kit included as standard. Ready for Chaffolink connectivity. EASY INSTALLATION Minimum operating temperature down to -20°C (-20*C via optional kit code 3318954). Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 20% energy savings in combination with Expert Control and the SRA function. Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CHAFFOTEAUX MIRA ADVANCE 25 kW GAS BOILER LINK Wi-Fi INCLUDING METHANE WITH FUME EXHAUST KIT Product code: 3310612 Energy label specifications according to the European ErP directive Heating energy efficiency Class A+ Sanitary energy efficiency Class A Withdrawal profile: XL Energy performance Nominal heat input in heating max/min (Hi) Qn: 22/2.5 kW Nominal DHW heat input max/min (Hi) Qn: 26/2.5 kW Heating output max/min (80°C-60°C) Pn: 21.5/2.3 kW Heating output max/min (50°C-30°C) Pn: 23.6/2,6 kW DHW max/min useful power Pn: 24.9/2.4 kW Efficiency at nominal heat input (60/80°C) Hi/Hs: 97.7/87.9% Efficiency at 30% of Qn with return to 30°C Hi/H: 109.8/98.9% Performance stars (dir. 92/42/EEC): **** Working burner chimney losses: 2.6% Emissions Evacuation residual head: 100 Pa NOx class. 6 Smoke temperature (G20) (80°C-60°C): 70 °C Maximum flue gas flow rate (G20) (80°C-60°C): 44.9 kg/h Excess air (80°C-60°C): 34% Heating/DHW circuit Expansion vessel capacity 8 l Maximum heating pressure: 3 bar Min/max heating temperature (high temperature range): 35 / 82 °C Min/max heating temperature (low temperature range): 20 / 45 °C Min/max domestic hot water temperature: 36 / 60 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C): 14.3 l/min Instantaneous quantity of hot water ∆T=25°C - ∆T=35°C: 19.8 - 12.3 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Electrical data Supply voltage/frequency: V/Hz 230/50 Total absorbed electric power: 80 W Energy efficiency index of the circulator: EEI ≤ 0.23 IP X5D degree of protection Dimensions HxWxD: 745 x 400 x 315mm Weight: 29.7Kg Diet Methane gas MIRA ADVANCE LINK Mira Advance Link, powerful core for amazing control. Equipped with the innovative SpinTech exchanger, it excels in its category thanks to the electronic combustion control, integrated Chaffolink connectivity, Expert Control and standard external probe. Can be installed in partially protected places Maximum Performance: New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. Maximum Comfort Modulation ratio 1:10. Electronic combustion control E-Burning System. SRA function. Gas transformation from the technical menu without the need for a kit. Chaffolink connectivity integrated in the boiler. External temperature from the internet thanks to integrated connectivity. Ease of Installation Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. Energy saving and respect for the environment Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy class in heating: A Energy class in sanitary: A Load profile: XL Heating performance: Thermal input (min./max): 3.7/22 kW Useful power (min./max.): 3.95/21.4 kW Useful thermal efficiency: 98.0 % Idle efficiency (60/80°C): 97.5/87.8 % Heating output max/min (80°C-60°C): 21.4/3.4 kW Performance stars (dir. 92/42/EEC): **** Healthcare performance: Thermal input (min./max): 3.7/28.9 kW DHW thermal power (max/min): 24.9/3.5 kW Heating circuit: Expansion vessel pre-charge pressure: 1 bar Maximum heating pressure: 3 bar Expansion vessel capacity: 8 L Min/max heating temperature (high temperature range): 35 / 82 °C Min/max heating temperature (low temperature range): 20 / 45 °C Healthcare Circuit: Min/max domestic hot water temperature: 36 / 90 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 12.1 l/min Instantaneous quantity of hot water ∆T=25°C: 15.5 l/min Instantaneous quantity of hot water ∆T=35°C: 10.4 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Max/min domestic water pressure: 7.0 / 0.2 bar Electrical Data: Protection index IPX5D Class 6 NOx Energy efficiency index of the circulator: EEI ≤ 0.23 Minimum ambient temperature of use: >0°C Total absorbed electric power: 67 W Power supply: LPG (G20/G30) Dimensions: (HxWxD): 745x400x385mm; Weight: 29.7kg Methane, LPG and propane air operation with conversion kit included as standard. General characteristics: Pigma is the new CHAFFOTEAUX boiler, which is part of the Advance Range, resulting in the category leader with a completely renewed design, using the innovative SpinTech exchanger, electronic combustion control, integrated Chaffolink connectivity and Expert Control and external probe as standard, guaranteeing extremely high performance with extremely low fuel consumption. Can be installed in partially protected places. SpinTech features: Exchanger that works with a stainless steel monospiral New single coil primary heat exchanger in stainless steel Passage sections increased by 142% compared to the previous version 1 m more head Seasonal yield at 94% Class A+ thanks to the standard thermoregulation accessories Performance certified by the TÜV RHEINLAND Group. Give Comfort: Modulation ratio 1:7 Optimized internal silencer SRA function Gas transformation with kit included as standard Ready for Chaffolink connectivity Advantages: Installation in partially protected places Smoke outlets 80, 60, 50 mm Intuitive electrical connections Up to 20% energy savings in combination with Expert Control and the SRA function Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6.

Read more less

Overview CHAFFOTEAUX NIAGARA C GREEN 25 EU CONDENSING BOILER Cod. 3310336, COMPLETE WITH FUME EXHAUST KIT - NEW ErP : wall-hung condensing boilers with integrated storage. Technical specifications Product code: 3310336 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Rated heat output max/min (Hi) Qn:ÿ22/5,5ÿkW Useful heating power80§ C/ 60§ C max/minÿ21,6/5,2ÿkW Useful heating power50§ C/ 30§ C max/minÿ23,5/5,8ÿkW Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ25/ 5.5 kW Efficiency at nominal heat input:ÿ98% Efficiency 30% of nominal heat input:ÿ109.1% Energy efficiency stars: (dir 92/42/EEC) **** Capacity of the expansion vessel: 10 lt Maximum system water capacity: 100/300 litres Sanitary comfort stars(EN13203): *** Specific flow rate in compliance with EN 625 at 30§C: 19 l/min Hot water flow rate at T 35§ C: 16.3 l/min Hot water flow rate at T 25§ C: 22.8 l/min Maximum absorbed power; W 70 Degrees of protection for the electrical system:ÿIPX5D Nox class: 5 Dimensions hxwxd: mmÿ900 x 600 x 465ÿ; 57kg LPG fuel supply Features list NIAGARA C GREEN Ebus2 EU Condensation associated with sanitary comfort (2 20-litre boilers) integrated in just 60 cm wide for total comfort.ÿPower, compact dimensions and high technology for the most demanding. Sanitary comforts 40 liter reserve thanks to 2 standard stainless steel inter-accumulators. Stratified storage tanks: the advantages of domestic hot water storage and instantaneous production. Permanent availability of domestic hot water even in the event of exhaustion of the accumulated hot water reserve. Power optimization thanks to a continuous modulation of the DHW pump flow rate. Domestic hot water performance ***, maximum level unexpected by the EN 13203 standard. Flow rate of 27.6 l/min with T = 25§C. Integrated 2-litre sanitary expansion tank. Heating comfort 4 star efficiency of combustion in compliance with the EN92/42 standard. High modulation ranges from 25% to 100%. Total premix modulating burner and stainless steel heat exchanger. Modulating fan and pump to improve acoustic comfort and reduce energy consumption. Climatic thermoregulation for the management of 2 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. Front panel programming with drop-down menu: history, permanent self-diagnosis, operating temperature, weekly programming and display of all information on the settings. SRA function, automatic boiler regulation system according to heating requirements. Convenience of installation use Easy component management: common internal layout with the rest of the Chaffoteaux range. Easier start-up: automatic purge function and directly accessible combustion adjustment. Easy maintenance: all components can be accessed from the front. Complete solar system regulation (with optional solar clip in). Energy saving Final 23% energy savings in combination with Easy Control and the SRA function. 40% reduction in CO2 emissions**. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview CHAFFOTEAUX NIAGARA C GREEN 25 EU CONDENSING BOILER Cod. 3310336, COMPLETE WITH FUME EXHAUST KIT - NEW ErP : wall-hung condensing boilers with integrated storage. Technical specifications Product code: 3310336 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Rated heat output max/min (Hi) Qn:ÿ22/5,5ÿkW Useful heating power80§ C/ 60§ C max/minÿ21,6/5,2ÿkW Useful heating power50§ C/ 30§ C max/minÿ23,5/5,8ÿkW Sanitary nominal thermal power max/min (60/80§C) PCI:ÿ25/ 5.5 kW Efficiency at nominal heat input:ÿ98% Efficiency 30% of nominal heat input:ÿ109.1% Energy efficiency stars: (dir 92/42/CEE) **** Capacity of the expansion vessel: 10 lt Maximum system water capacity: 100/300 litres Sanitary comfort stars(EN13203): *** Specific flow rate in compliance with EN 625 at 30§C: 19 l/min Hot water flow rate at T 35§ C: 16.3 l/min Hot water flow rate at T 25§ C: 22.8 l/min Maximum absorbed power; W 70 Degrees of protection for the electrical system:ÿIPX5D Nox class: 5 Dimensions hxwxd: mmÿ900 x 600 x 465ÿ; 57kg METHANE power supply Features list NIAGARA C GREEN Ebus2 EU Condensation associated with sanitary comfort (2 20-litre boilers) integrated in just 60 cm wide for total comfort.ÿPower, compact dimensions and high technology for the most demanding. Sanitary comforts 40 liter reserve thanks to 2 standard stainless steel inter-accumulators. Stratified storage tanks: the advantages of domestic hot water storage and instantaneous production. Permanent availability of domestic hot water even in the event of exhaustion of the accumulated hot water reserve. Power optimization thanks to a continuous modulation of the DHW pump flow rate. Domestic hot water performance ***, maximum level not foreseen by the EN 13203 standard. Flow rate of 27.6 l/min with T = 25§C. Integrated 2-litre sanitary expansion tank. Heating comfort 4 star efficiency of combustion in compliance with the EN92/42 standard. High modulation ranges from 25% to 100%. Total premix modulating burner and stainless steel heat exchanger. Modulating fan and pump to improve acoustic comfort and reduce energy consumption. Climatic thermoregulation for the management of 2 circuits, according to the room and/or outside temperature for greater comfort and greater energy savings. Front panel programming with pull-down menu: history, permanent self-diagnosis, operating temperature, weekly programming and display of all information on the settings. SRA function, automatic boiler regulation system according to heating requirements. Convenience of installation use Easy component management: common internal layout with the rest of the Chaffoteaux range. Easier start-up: automatic purge function and directly accessible combustion adjustment. Easy maintenance: all components can be accessed from the front. Complete solar system regulation (with optional solar clip in). Energy saving Final 23% energy savings in combination with Easy Control and the SRA function. 40% reduction in CO2 emissions**. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less