Our chiller heat pumps represent the innovative energy solution for efficient heating and cooling of rooms. Check it out and discover the benefits today!
Chiller heat pumps
Hisense Split Heat Pump Single Fan Air/Water Hisense Hi-Terma Ahm-080hcdsaa + Ahw-080hcds1 R-32 Wi-Fi Optional With Control Included
IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. First start included Technical features Indoor Unit Catalog Code : AHM-080HCDSAA Outdoor Unit Catalog Code: AHW-080HCDS1 Command Included Optional commands Wi-Fi interface : HCCS-H64H2C1M Temperature sensor : HTS-E1000A1 Energy efficiency SEER: 5.83 SCOP: 3.42 Energy efficiency class: A+++/A++ Performance Rated capacity in heating : 8.0 ~ 11.0 kW Rated capacity in cooling : 7.2 ~ 9.1 kW Water flow rate : 0.60 ~ 1.90 m 3 /h Indoor unit sound pressure : 28 dB(A) Outdoor unit sound pressure : 47 ~ 50 dB(A) Indoor unit sound power : 42 dB(A) External unit sound power : 64 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-32 Operating range - Cooling: 5° ~ 46° Cbs - Heating: -25° ~ 35° Cbs - DHW : -25° ~ 40° Cbs Installation data Liquid piping diameter : 6.35 mm (1/4") Gas pipe diameter: 12.70 (1/2") Maximum piping length : 45~50 m Maximum difference in height indoor unit / outdoor unit: 30 m Dimensions and weight Internal unit dimensions (HxWxD): 890x520x320 mm Outdoor unit weight: 44.5 Kg External unit dimensions (HxWxD): 750x900x340 mm Outdoor unit weight: 50.5 Kg Hisense Hi-Therma heat pump Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components. High Efficiency and Excellent Performance Ecological R32 Refrigerant The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions Characteristics ◆ Zero Ozone Impact Potential ◆ Reduced Global Warming Potential ◆ Reduced Global Warming Potential ◆ Single component refrigerant: easy to handle High Efficiency A+++ Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact High Efficiency Twin Rotary Inverter Compressor High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable 1. High efficiency electric motor Optimized electric motor design to increase compressor performance 2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise 3. Comprehensive mechanism design Improved volumetric efficiency and overall performance 4. Screw fixing Improve the fixing effect and reduce the deformation of the core Simplified installation The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system Main hydraulic components Insulated plate heat exchanger Expansion vessel Very high head DC circulator, flow rate reading on command Wide Operating Range Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance. Management of External Heat Sources Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system Smart Grids The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid Double Thermal Zone By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations Sound Reduction Low Noise Mode For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A). Night mode By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A) Up to 7 indoor environments with independent temperature control With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2. Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃ Screed drying Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller Standard Color Touch Remote Control for Monobloc, optional for Split version Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces ◆ Elegant design ◆ Compact (90×90mm) ◆ Intuitive and touch screen General characteristics ◆ Setup wizard for commissioning. ◆ 10 languages, including Italian. ◆ View energy consumption and capacity. ◆ Water temperature control of the circuits and individual control of the room temperature. ◆ Alarm code and advanced parameter display; useful for maintenance. ◆ Weekly timer and holiday mode. ◆ ECO/Silent/Night mode suitable for different user needs. ◆ Physical button for on/off and reset Slide adjustment The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning Theme setting Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface display Easy installation In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick Room thermostat The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit Features HSXE-VC04 ◆ Elegant design ◆ Flat shape for easy wall installation ◆ Compact (86×86mm) ◆ Intuitive control via touch buttons ◆ Room temperature and DHW set ◆ ECO/DHW/Timer (0.5-24 hours) One button for DHW Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings Remote Management Via App Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone Simple configuration and use ◆ Up to 64 managed drives ◆ Up to 32 users ◆ Consumption management ◆ Faults ◆ On/Off ◆ Circuit/room/DHW temperatures ◆ 14 languages, including Italian ◆ Multiple scenarios that can be set Energy management Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system Hi-Therma indoor unit Hi-Therma Split is an air-water heat pump system with separate hydronic module, connected to the outdoor unit via refrigerant pipes and housed inside the building, therefore protected from atmospheric agents and any water freezing phenomena in the harsher periods. This internal module is equipped with a heat exchanger, water circulator, expansion vessel and all the main functional and safety hydraulic components Elegant appearance Compact and functional design Integrated control Intuitive control interfaces Easy installation Facilitated maintenance The position of the components in the indoor unit has been completely optimised. The electrical panel can be rotated 88° facilitating maintenance of the rear parts. Furthermore, the control on the machine can be easily extracted from the front panel and, thanks to a special anchoring system, hung on the electrical box to further facilitate maintenance operations Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.175,00
-
Hisense Hisense Hi-Terma Reversible Monoblock Heat Pump Ahz-080hcds1 R-32 Wi-Fi Optional With Control Included
IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. First start included Technical features Model : AHZ-080HCDS1 Command Included Optional commands Wi-Fi interface : HCCS-H64H2C1M Temperature sensor : HTS-E1000A1 Energy efficiency SEER: 5.83 SCOP : 3.50 Energy efficiency class: A+++/A++ Performance Rated capacity in heating : 8.0 ~ 11.0 kW Rated capacity in cooling : 7.2 ~ 9.1 kW Air flow rate : 2700 m 3 /h Water flow rate : 0.60 ~ 1.90 m 3 /h Sound Pressure : 47 ~ 50dB(A) Sound power : 61 ~ 64 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-32 Operating range - Cooling: 5° ~ 46° Cbs - Heating: -25° ~ 35° Cbs - DHW : -25° ~ 40° Cbs Installation data Gate valves diameter: G 1” - G 1” (male) Inlet / outlet piping diameter: G 1” / G 1” (female) Dimensions and weight Dimensions (HxWxD): 815x1270x340 mm Weight : 88Kg Hisense Hi-Therma heat pump Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components. High Efficiency and Excellent Performance Ecological R32 Refrigerant The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions Characteristics ◆ Zero Ozone Impact Potential ◆ Reduced Global Warming Potential ◆ Reduced Global Warming Potential ◆ Single component refrigerant: easy to handle High Efficiency A+++ Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact High Efficiency Twin Rotary Inverter Compressor High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable 1. High efficiency electric motor Optimized electric motor design to increase compressor performance 2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise 3. Comprehensive mechanism design Improved volumetric efficiency and overall performance 4. Screw fixing Improve the fixing effect and reduce the deformation of the core Simplified installation The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system Main hydraulic components Insulated plate heat exchanger Expansion tank Very high head DC circulator, flow rate reading on command Wide Operating Range Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance. Management of External Heat Sources Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system Smart Grids The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid Double Thermal Zone By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations Sound Reduction Low Noise Mode For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A). Night mode By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A) Up to 7 indoor environments with independent temperature control With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2. Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃ Screed drying Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller Standard Color Touch Remote Control for Monobloc, optional for Split version Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces ◆ Elegant design ◆ Compact (90×90mm) ◆ Intuitive and touch screen General characteristics ◆ Setup wizard for commissioning. ◆ 10 languages, including Italian. ◆ View energy consumption and capacity. ◆ Water temperature control of the circuits and individual control of the room temperature. ◆ Alarm code and advanced parameter display; useful for maintenance. ◆ Weekly timer and holiday mode. ◆ ECO/Silent/Night mode suitable for different user needs. ◆ Physical button for on/off and reset Slide adjustment The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning Theme setting Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface view Easy installation In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick Room thermostat The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit Features HSXE-VC04 ◆ Elegant design ◆ Flat shape for easy wall installation ◆ Compact (86×86mm) ◆ Intuitive control via touch buttons ◆ Room temperature and DHW set ◆ ECO/DHW/Timer (0.5-24 hours) One button for DHW Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings Remote Management Via App Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone Simple configuration and use ◆ Up to 64 managed drives ◆ Up to 32 users ◆ Consumption management ◆ Faults ◆ On/Off ◆ Circuit/room/DHW temperatures ◆ 14 languages, including Italian ◆ Multiple scenarios that can be set Energy management Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.575,00
-
Panasonic Panasonic Aquarea T-Cap Monoblock Heat Pump 9 Kw Wh-Mxc09j3e5 R-32 Wi-Fi Optional A++/A++ With Command Included
MANDATORY CONFIGURATION AND START-UP PIT-A2W-START UP NOT INCLUDED! Technical features Catalog number WH-MXC09J3E5 Command Included Wi-Fi Optional : CZ-TAW1 Energy efficiency Energy Efficiency Class at medium temperatures: A++ Energy Efficiency Class at low temperatures: A++ Performance Cooling Capacity: 9.0 kW Heating Capacity: 9.0 kW Sound power level : 65 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R410 Operating range - Cooling: -20° ~ 35°C - Heating: -10° ~ 43° C Installation data Plumbing pipe diameter: 1 mm (1/4") Dimensions and weight Dimensions (HxWxD): 1410x1283x320 mm Empty weight: 140 Kg Aquarea Heat Pumps Efficiency at the highest levels Panasonic introduces an innovative low energy consumption system based on air to water heat pump technology. Aquarea heats your home effectively and efficiently, even in extreme outside temperatures. Aquarea can refresh spaces even in summer and bring hot water all year round. Aquarea High Performance is the range for new installations and low consumption homes. Exceptional efficiency and energy savings with low CO 2 emissions and minimal space. The Monobloc system has only one outdoor unit. The system does not require a refrigerated connection and is only connected to heating and / or hot water A heat pump converts heat energy outdoors into heat indoors With Aquarea, 80% of the thermal energy required is taken from the environment. Aquarea, through the heat exchange with the external air and the refrigerant gas contained in it, is able to heat/cool the water by conveying it to the domestic air conditioning system and satisfies all the needs for the production of domestic hot water 3 good reasons why Aquarea is the ideal solution for your home Wide range suitable for all homes Aquarea is an innovative system with low energy consumption, designed to provide ideal temperatures and domestic hot water, even with extreme outside temperatures. It is highly reliable thanks to the quality of all components, including the compressor, developed and manufactured by Panasonic. With the possibility to choose between multiple units, Aquarea ensures a very wide range availability to ensure the most appropriate choice for your home, regardless of size Heat pump, 80% energy at no cost Based on air-to-water heat pump technology, Aquarea is highly efficient and environmentally friendly. It captures the thermal energy present in the air and transfers it to heat the water needed for heating your home, for domestic hot water and even to cool your home if you wish. In this way, up to 80% of the required thermal energy is taken from the ambient air, even at extremely low temperatures Helps you save Save up to €1,100 a year compared to conventional electric heating. While the initial investment may be higher than with other technologies, the cost of ownership is much lower, with a reduced initial cost payback period. The savings are significant, particularly when compared to oil fired electric boilers and heaters Aquarea with R32 Refrigerant The detail that makes the difference Panasonic recommends R32 refrigerant as it is environmentally friendly. Unlike R22 and R410A gases, R32 refrigerant has a low potential impact on the ozone layer and global warming. Panasonic has introduced R32 models to align with all European countries that have adopted the Montreal Protocol to protect the ozone layer and prevent global warming Innovative installation Extremely easy to install. (Make sure the pressure gauge and vacuum pump are compatible with R32). This refrigerant is 100% pure, making it easier to recycle and reuse Environmental innovation Zero impact on the ozone layer. Reduced impact on global warming by 75% Economic and energy consumption innovation Lower costs and higher savings. Higher efficiency than R410A gas Aquarea Service Cloud. Check anytime, anywhere Aquarea Smart Cloud is a powerful, intuitive and free service designed to help you remotely control Aquarea heat pumps from anywhere, 24/7 The advanced control is an intelligent, sophisticated and effective service to fully manage the Aquarea range in the heating, cooling and domestic hot water functions inside the house, including the monitoring of domestic energy consumption via smartphone, tablet or mobile device Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€4.946,00
-
Hisense Hisense Hi-Terma Reversible Monobloc Heat Pump Ahz-044hcds1 R-32 Wi-Fi Optional With Control Included
IN CASE OF NO IMMEDIATE AVAILABILITY, THE PRODUCT WILL BE ORDERED AND SHIPPED IN 10 WORKING DAYS. First start included Technical features Model : AHZ-044HCDS1 Command Included Optional commands Wi-Fi interface : HCCS-H64H2C1M Temperature sensor : HTS-E1000A1 Energy efficiency SEER: 5.75 SCOP: 3.47 Energy efficiency class: A+++/A++ Performance Nominal capacity in heating : 4.4 ~ 7.0 kW Rated capacity in cooling : 5.1 ~ 6.3 kW Air flow rate : 2700 m 3 /h Water flow rate : 0.50 ~ 1.21 m 3 /h Sound pressure : 47 dB(A) Sound power : 61 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-32 Operating range - Cooling: 5° ~ 46° Cbs - Heating: -25° ~ 35° Cbs - DHW : -25° ~ 40° Cbs Installation data Gate valves diameter: G 1” - G 1” (male) Inlet / outlet piping diameter: G 1” / G 1” (female) Dimensions and weight Dimensions (HxWxD): 815x1270x340 mm Weight : 88Kg Hisense Hi-Therma heat pump Hi-Therma monoblock is an air-water heat pump system with indoor and outdoor units combined in a single module positioned outdoors and to which the water pipes to the system are directly connected. It is therefore not necessary to carry out work on the refrigerant pipes, considerably simplifying the installation, allowing the same also to non-certified technicians and thus avoiding the registration practices on the F-gas electronic register. The unit is equipped with a heat exchanger, water circulator, expansion tank and all the main functional and safety hydraulic components. High Efficiency and Excellent Performance Ecological R32 Refrigerant The R32 refrigerant contributes to the achievement of the objectives of the F-gas regulation as described in the EU regulation 517/2014. Hisense Hi-Therma heat pump system adopts R32 refrigerant, which is a perfect solution to meet European targets on maximum CO 2 emissions Characteristics ◆ Zero Ozone Impact Potential ◆ Reduced Global Warming Potential ◆ Reduced Global Warming Potential ◆ Single component refrigerant: easy to handle High Efficiency A+++ Hi-Therma offers the most efficient solution for domestic heating and domestic hot water production. The highest energy classification A+++ (in low temperature water conditions) and A++ (at medium temperature) ensures savings on the electricity bill, reducing consumption, with a consequent advantage also on the environmental impact High Efficiency Twin Rotary Inverter Compressor High efficiency Twin Rotary DC Inverter compressor. Equipped with unique double pressure chamber design with symmetrical position which can effectively reduce vibration, noise and improve its performance, even in low frequency operation. Low lubricant emission, stable oil return and gas-liquid separator make the system more reliable 1. High efficiency electric motor Optimized electric motor design to increase compressor performance 2. Optimized rotor design Lowering the center of gravity of the compressor significantly reduces vibration and noise 3. Comprehensive mechanism design Improved volumetric efficiency and overall performance 4. Screw fixing Improve the fixing effect and reduce the deformation of the core Simplified installation The monobloc Hi-Therma unit allows for easy installation with no need for refrigerant piping work or additional refrigerant. It only needs the connections on the pipes towards the internal system Main hydraulic components Insulated plate heat exchanger Expansion vessel Very high head DC circulator, flow rate reading on command Wide Operating Range Heating operation is guaranteed up to external temperatures of -25°C, therefore it is able to satisfy the user even in very harsh areas and can produce delivery water up to 60°C. In DHW mode it can operate up to an external 46°C and produce hot water inside the boiler up to 55°C, 75°C with the aid of an electric resistance. Management of External Heat Sources Hi-Therma can intelligently manage multiple supplementary heat sources: electric resistance for heating, electric resistance in the DHW tank, third-party boiler, solar thermal system Smart Grids The Hi-Therma system can be integrated with a photovoltaic system in order to optimize the self-consumption of the energy produced, thus reducing the energy requirement from the electricity grid Double Thermal Zone By managing two circuits with water at different temperatures, Hi-Therma adapts to the characteristics of the different terminals present in the system, thus responding to the needs of both new buildings and renovations Sound Reduction Low Noise Mode For optimal user comfort, the system can operate at low sound emission with a simple touch on the control, or via remote external input. Maximum reduction in this mode 8 dB(A). Night mode By means of night mode the period of low noise operation can be programmed according to the needs of the users. Sound pressure can be reduced up to 35dB(A) Up to 7 indoor environments with independent temperature control With the Hi-Therma system, up to 7 ambient temperatures can be managed independently through the installation of optional accessories: wall sensors, maximum 6, or thermostats, maximum 2. Hi-Therma can also manage swimming pool heating with a specially dedicated mode. Once this function is activated, the hot water can be sent to a heat exchanger allowing the tub to be heated and kept at a comfortable temperature between 24 and 33 ℃ Screed drying Hi-Therma is equipped with an automatic program for drying the radiant floor screed of a house under construction or renovation. The drying process takes 7 days. In the first three days the system works with water temperature at 25℃ and in the following four days with maximum outlet water temperature set by controller Standard Color Touch Remote Control for Monobloc, optional for Split version Sliding Screens Swiping the screen left and right quickly navigates between the different interfaces ◆ Elegant design ◆ Compact (90×90mm) ◆ Intuitive and touch screen General characteristics ◆ Setup wizard for commissioning. ◆ 10 languages, including Italian. ◆ View energy consumption and capacity. ◆ Water temperature control of the circuits and individual control of the room temperature. ◆ Alarm code and advanced parameter display; useful for maintenance. ◆ Weekly timer and holiday mode. ◆ ECO/Silent/Night mode suitable for different user needs. ◆ Physical button for on/off and reset Slide adjustment The temperature can be adjusted quickly by sliding the semicircle, especially for large variation ranges. The lower physical button (on/off and reset) does not affect the aesthetics thanks to its lateral positioning Theme setting Three different themes, day, night and auto, can be applied to different scenarios at different times, giving you a more user-friendly and personalized interface view Easy installation In designing the control we have given great importance to practicality and ease of installation. Thanks to the rear anchoring panel, assembly and disassembly is very quick Room thermostat The optional thermostat allows you to set both room temperature and to manage the most useful control parameters on the indoor unit. It allows you to adjust the room temperature precisely and in real time, ensuring high comfort and energy savings. It is possible to connect up to 2 thermostats per unit Features HSXE-VC04 ◆ Elegant design ◆ Flat shape for easy wall installation ◆ Compact (86×86mm) ◆ Intuitive control via touch buttons ◆ Room temperature and DHW set ◆ ECO/DHW/Timer (0.5-24 hours) One button for DHW Users can access the domestic hot water mode setting with one touch and also manage the main circuit settings Remote Management Via App Thanks to the optional Hi-Mit II interface it is possible to manage and monitor the system remotely. Connected Hi-Mit II to the LAN cable or to the WiFi router, users can manage the system anytime and anywhere, using the appropriate App from their smartphone Simple configuration and use ◆ Up to 64 managed drives ◆ Up to 32 users ◆ Consumption management ◆ Faults ◆ On/Off ◆ Circuit/room/DHW temperatures ◆ 14 languages, including Italian ◆ Multiple scenarios that can be set Energy management Hi-Mit allows intelligent energy management, thanks to the display of readings divided by day, week or month. Being able to set also the low consumption mode can further increase the energy saving of the system Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.225,00
-
Daikin Offer Mini Chiller Daikin Heat Pump Inverter Air Water Ewyq009acv3p From 9 Kw Single-Phase R-410
OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Technical features Model : EWYQ009ACV3P Energy efficiency EER: 2.85 ESEER: 4.44 COP: 3.06 Performance Cooling Capacity: 8.62 kW Heating Capacity: 9.05 kW Cooling absorption: 2.83 kW Air Flow : 5760 m 3 /h Cooling water flow rate: 0.406 l/sec Heating water flow rate: 0.478 l/sec Nominal head Cooling : 58 kPa Nominal head Heating : 52.8 kPa Sound power level : 64 dB(A) Sound pressure level : 51 dB(A) Electrical data Type of Compressor : Scroll Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R-410 Field of Operation Water side cooling : 5° ~ 22° C Water side heating : 25° ~ 50° C Air side cooling : 10° ~ 46° CBS Air side heating : -15° ~ 35° CBS Installation data Diameter of hydraulic pipe connections: 31.75 mm (5/4") Dimensions and weight Dimensions (HxWxD): 1435x1418xx382 mm Empty weight: 180 Kg Daikin Mini Chiller Systems Air cooled minichiller with Inverter The Daikin Minichiller series dedicated to residential or small commercial applications , with nominal capacities from 5 kW to 13 kW, uses the inverter as a distinctive feature. The hermetic Swing compressor for sizes 005-007 kW and Scroll for the following ones 009-013 kW is driven by Inverter as well as the fans of the unit. High performance is therefore achieved at partial loads, control of the water delivery temperature at a fixed point, which can be used, for example, for radiant panel systems, and excellent acoustic performance at partial loads thanks to the simultaneous reduction of noise emission from both the compressor and of fan. The water content necessary for the correct operation of the unit is reduced thanks to the inverter, and can guarantee operation even without buffer tanks. The water-refrigerant exchanger is with brazed plates Why the inverter ? The inverter allows you to continuously modulate the power supplied by the compressor based on the thermal load requests, varying the number of revolutions of the same. This principle, compared to the traditional technology which divides the power into discrete steps of even high capacity, guarantees the final customer energy savings and better control of the operating parameters of the system. Most of the time, the cooling demand of a building is less than the maximum load capacity of the system. The larger the variations in yearly load, the more vital it is to ensure units are operating efficiently. Energy Saving Absorption proportional to the power supplied The Inverter offers, for the chiller as a whole, the possibility of significantly increasing its efficiency at partial loads, i.e. the condition in which, seasonally, the chiller will work for most of the time, guaranteeing the best performance and reaching high values average seasonal summer yield ( ESEER ). Ideal temperature Continuous regulation of power and noise The ability to work in modulation offers the guarantee of accurate control of the fluid temperature, regulated at a fixed point on the delivery to the system. This feature is ideal from the point of view of industrial application and precision temperature control, as it excludes the constant stops/starts of the compressors, responsible for electrical and mechanical wear. A further advantage is represented by the lower acoustic impact when compressors and fans operate partialised, i.e. in conditions of lower demand for power supplied, while ensuring greater stability for the water temperature. Lower Plant Costs Reduction of water accumulation/content of the plant (-60%) Thanks to the ability to react quickly to load variations, chillers that use Inverter technology can work correctly with a strong reduction in the water content in the system (-60% compared to traditional chillers). This makes it possible to reduce thermal inertia, with energy optimization and shorter start-up times. This results in a significant saving in system costs as the accumulation tank is no longer necessary. Electrical advantages From an electrical point of view, the Inverter introduces two great advantages: Low inrush currents, considerably lower than the rated operating current, which results in a lower cost for the supply of electrical components to be installed More power available when needed The inverter allows you to vary the power supplied; by feeding the compressor at a higher frequency it is possible to reach maximum power values higher than the nominal ones. This offers benefits in bringing the system up to speed but, above all, becomes an evident technical plus when the machine works in extreme operating fields. For example, traditional air-cooled heat pumps are usually combined with boilers to compensate for the efficiency deficit due to cold outside temperatures. Inverter heat pumps can benefit from greater power when ambient conditions require it, losing only 15% of output in the passage from 7°C to -10°C of external air (in the case of an ON-OFF the reduction would be ~40%), guaranteeing a water temperature of 50°C at all regimes. These advanced heat pumps can therefore be considered "primary", as they make it possible to avoid the use of boilers. Scroll compressor Scroll compressors have two scrolls, one remains stationary while the other orbits eccentrically without rotating. Designed for small and medium capacities, they guarantee constant reliability and high efficiency throughout their operational life Characteristics Simple, compact and robust Absence of valves and swing joint mechanisms, to ensure maximum reliability Constant compression, to ensure a low level of energy consumption Increased compression efficiency due to the absence of volumetric expansion Low sound level Low starting current The Scroll compressor lends itself to the use of the Inverter, as on the range up to 13 kW, being able to guarantee high ESEER values, absence of peak and precise control of the outlet water temperature Advantages: › Extraordinary part load efficiency › Inverter technology to ensure low noise and best-in-class ESEER values › Wide operating range › Integrated hydronic systems › Easy “plug and play” installation › Single-phase power supply for residential applications, three-phase power model available for small commercial applications Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.014,00
-
Daikin Daikin Mini Chiller Cooling Only Inverter Air Water Ewyq-Acv3p009 9 Kw R-410
OPTIONAL FIRST START-UP, CONTACT THE AREA ASSISTANCE CENTER! Daikin Mini Chiller Cooling Only Inverter Air Water EWYQ-ACV3P009 9 kW R-410 Technical features Model : EWAQ-ACV0093P Energy efficiency EER: 3.05 ESEER: 4.3 Performance Cooling Capacity: 8.62 kW Absorbed power Cooling : 1.9 kW Air Flow : 6000 m 3 /h Sound power level : 64 dB(A) Sound pressure level : 51 dB(A) Electrical data Type of Compressor : Scroll Power supply (V,Hz, Ø) : 230/50/1 Refrigerant gas : R-410 Field of Operation Water : 5° ~ 22° C Air : 10° ~ 46° CBS Installation data Diameter of hydraulic pipe connections: 31.75 mm (5/4") Dimensions and weight Dimensions (HxWxD): 1435x1418xx382 mm Empty weight: 180 Kg Minichillers Inverter technology guarantees: continuous adaptation to load requirements; excellent efficiency under partial load conditions (ESEER values up to 4.57); significant reduction of starting currents; precise temperature control (water leaving the evaporator) Inverter technology to ensure low noise and best-in-class ESEER values Wide operating range Integrated hydronic systems Easy “plug and play” installation Single-phase power supply for residential applications, three-phase power model available for small commercial applications Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.560,00
-
MITSUBISHI ELECTRIC Reversible Hanging Hydronic Module Mitsubishi Electric Hydrobox Ersc-Vm2d Medium For Heating, Cooling And DHW
Technical features Product code : ERSC-VM2D Size : Medium Version : reversible Performance Minimum Water Flow Rate: 5.00 l/min Maximum Water Flow Rate: 36.9 l/min Speed number : 5 System water content of the module: 6.1 litres Sound power : 40 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 / R410 Installation data Pipe diameter Liquid : 6.35 mm (1/4") Gas pipe diameter: 12.70 mm (1/2") Dimensions and weight Dimensions (HxWxD): 800x530x360 mm Weight : 48Kg A wide range for every need The Hydrobox is the indoor hydronic module for wall-hung installation, which contains all the main components of the hydraulic system. The heat exchanger, the hydraulic circulator, an expansion vessel, a supplementary electrical resistance and the safety components can be found in a very small space. The hydronic modules can be connected to an outdoor unit from the Ecodan® series characterized by a wide range extension or from the Zubadan series to favor performance at low temperatures. Hydrobox offers great flexibility of use and versatility of installation, it is also possible to associate it with a boiler for domestic hot water Attention has been paid to the smallest details: The simple, modern and elegant design The small size allows installation in kitchens, closets, small technical rooms, cellars, etc... The main components are located in the front of the unit to facilitate service operations Hydrobox and reversible Hydrobox The Hydrobox is available in two versions, a reversible Hydrobox which also adds the possibility of providing cooling and a hot-only Hydrobox which can be used for heating and the production of domestic hot water (optional) FTC6 control system The module is equipped with the new FTC6 control unit. The backlit control, which can be removed from the unit body and installed remotely, is equipped with a large display with graphic icons; from it all the operating parameters are adjusted in a simple and intuitive way, the functions are set (weekly timer, "holiday" mode, domestic hot water filling, etc.), diagnostics and consumption monitoring are accessed. Thanks to the wireless control (optional) it is possible to measure the room temperature remotely and transmit it to the body of the unit, as well as modify the main operating parameters. It is not necessary to fix it so as to make it portable in different rooms. SG Ready: integration with photovoltaic systems Hydronic modules support SG ready function. Acronym of Smart Grid Ready, the function allows you to maximize the self-consumption of electricity from a photovoltaic system and is implemented with 2 additional inputs. MELCloud, the Wi-Fi control Control for Ecodan systems, main functions: On / Off Mode (Auto/Heat/Cool) Control 2 Zones DHW forcing Programmable weekly timer Reports Room temperature detection and setting Weather information of the installation location Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€2.651,00
-
Riello Air-Water Monoblock Heat Pump Riello Nxhm 008 Single-Phase R-32 20191942
Technical features Model : NXHM 008 Product code : 20191942 Energy efficiency SEER: 5.83 SCOP: 3.37 Heating Energy Efficiency Class: A+++ Performance Cooling Capacity: 7.45 kW Heating Capacity: 8.40 kW Cooling absorption: 2.22 kW Heating absorption: 1.63 kW Air flow rate : 4030 m 3 /h Sound power level : 59 dB(A) Sound pressure level : 48.5 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Hydraulic Pipe Diameter: 5/4" Dimensions and weight Dimensions (LxHxP): 1295x792x429 mm Empty weight: 121 Kg Riello NXHM Inverter Monobloc Air-Water Hydronic Heat Pumps NXHM is an energy efficient residential hydronic heat pump for heating, cooling and eventual. domestic hot water production. The unit works with ecological refrigerant R32 ensuring not only a low global warming potential (GWP) and CO 2 emissions, but also a high energy efficiency throughout the working range. NXHM is also equipped with new exchange coils with the special Blue-Fin hydrophilic and anti-corrosion treatment, which improves the drainage of condensate on the fins, thus reducing the risk of freezing on the coil (maximum efficiency even in humid climates) NXHM is available in 10 different models with heating capacities from 4.2 to 15.9 kW Twin-Rotary compressor with DC inverter technology, which modulates the power required to adapt perfectly to the actual load required High COP and EER (all NXHM heat pumps comply with the highest required standards in terms of energy efficiency) Third party certified performance HP Keymark Can be connected to low temperature radiators, underfloor heating elements and fan coil type units Water heating temperature up to +65 °C - Quick and easy installation Low noise unit Wired control included, it can completely manage a heating/cooling/domestic hot water system The control can manage up to 6 units in cascade (1 master and 5 slaves) even with different powers Standard anti-freeze protection that protects the entire system and especially the hydraulic parts from potential frost damage. Structure Cover cabinet made of steel sheet painted with neutral RAL 7035 powders which increases its resistance to corrosion by atmospheric agents. All panels are removable Compressor A double compressor protection shield for sound isolation further reduces sound levels. An advanced technology, able to offer the maximum energy efficiency and characterized by a high power available in peak conditions, as well as an optimized efficiency at low and medium compressor speeds. The NXHM heat pump is equipped with DC inverter technology, which combines two electronic regulation logics: go modulation (PAM) and pulse width modulation (PWM), in order to guarantee optimized compressor operation in each operating condition, minimize temperature fluctuations, and provide perfect comfort regulation and, all while significantly reducing energy consumption WFP extension DC pulse width modulation drives the compressor to peak load conditions (startup and peak load), so that the voltage increases at a fixed frequency. The compressor runs at high speed, in order to quickly reach the desired temperature PWM DC Pulse Width Modulation controls the compressor in partial load conditions, adapting the frequency in the presence of a fixed voltage. The speed of the compressor is precisely regulated, and the system offers a high level of comfort (absence of temperature fluctuations) under operating conditions characterized by exceptional efficiency. The compressor frequency increases steadily until it reaches the maximum level. This guarantees the absence of intensity peaks during the start-up phase and, moreover, guarantees a safe connection to a single-phase power supply, even for high-power systems. This compressor start logic makes "Soft Start" starters useless and, moreover, guarantees the immediate availability of maximum power External battery The external coil is made with copper pipes and hydrophilic aluminum fins. This solution allows the water to migrate more easily (by gravity) towards the bottom of the exchanger. In particular, this innovation allows: lengthening of the time necessary for the formation of frost, reducing the accumulation of the latter on the coil a more efficient defrosting phase, thanks to the improvement of the water flow on the fins; thus, operation in heating mode is improved Standard blue coating treatment which improves the resistance of the coils to corrosive agents and is recommended in all those applications with a moderate risk of corrosion External Fan Single variable speed Brushless DC fan motor for optimum air distribution together with extraordinarily low sound levels. Possibility of setting two different maximum noise levels Electronic expansion valve The electronic expansion valve is an electronic biflow expansion device, whose task is to optimize the volume of the refrigerant fluid present in the circuit and consequently the overheating, preventing the return of the fluid in the liquid phase towards the compressor. This device further improves the high efficiency and reliability of the system, as it also allows you to work with very low condensing pressures throughout the working range. Solenoid valve Given the extensive working fields of the unit, the solenoid valve, completely managed by the unit, allows the compressor to work at always optimal temperature levels Plate heat exchangers Vertical type plate heat exchanger in AISI 316 stainless steel Integrated hydronic group The hydronic module is always present and is supplied with a variable speed circulation pump, flow switch, 3 bar safety valve, expansion tank and inlet and outlet water temperature probes. It is possible to have the backup electric heater as an accessory. In domestic applications, it is possible to connect the inertial storage tank directly below the unit in order to reduce the space occupied inside the living areas to a minimum. All internal hydronic parts are insulated to reduce heat losses. The antifreeze program contains special functions which use the heat pump and backup heater (if available) to protect the whole system from freezing. When the temperature of the water flow in the system drops to a certain value, the unit will heat the water, either with the heat pump, electric heating tap or backup heater (if available). The frost protection function is only deactivated when the temperature rises to a certain value Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€3.500,00€2.540,00
-
Aermec Aermec Reversible Heat Pump Chiller Hmi160 13 Kw R-32 Three-Phase Integrated Wi-Fi With Remote Control Panel Included
FREE FIRST START-UP Technical features Product code : HMI160T Energy efficiency EER: 2.65 COP : 3.30 Energy Efficiency Class for low temperatures: A++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 13.0 kW Heating Capacity: 15.0 kW Cooling absorption: 4.91 kW Heating absorption: 4.70 kW Cooling water flow rate: 2231 l/h Heating water flow rate: 2734 l/h Sound power level : 72 dB(A) Sound Pressure Level : 57~59 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1200x878x460 mm Weight of Outdoor Unit: 151 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion tank Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.979,00
-
Aermec Aermec Reversible Heat Pump Chiller Hmi100 7.8 Kw R-32 Three-Phase Integrated Wi-Fi With Remote Control Panel Included
FREE FIRST START-UP Technical features Product code : HMI100T Energy efficiency EER: 2.95 COP: 3.70 Energy Efficiency Class for low temperatures: A+++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 7.8 kW Heating Capacity: 10.0 kW Cooling absorption: 2.64 kW Heating absorption: 2.70 kW Cooling water flow rate: 1270 l/h Heating water flow rate: 1710 l/h Sound power level : 69 dB(A) Sound Pressure Level : 54~56 dB(A) Electrical data Power supply (V,Hz, Ø) : 380~415/50/3 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1200x878x460 mm Weight of Outdoor Unit: 151 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion tank Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€4.500,00
-
Aermec Aermec Reversible Heat Pump Chiller Hmi140 12 Kw R-32 Single-Phase Integrated Wi-Fi With Remote Control Panel Included
FREE FIRST START-UP Technical features Product code : HMI140 Energy efficiency EER: 2.90 COP: 3.35 Energy Efficiency Class for low temperatures: A++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 12.0 kW Heating Capacity: 14.0 kW Cooling absorption: 4.14 kW Heating absorption: 4.18 kW Cooling water flow rate: 2080 l/h Heating water flow rate: 2500 l/h Sound power level : 70 dB(A) Sound Pressure Level : 55~57 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1200x878x460 mm Weight of Outdoor Unit: 151 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion tank Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€5.170,00
-
Aermec Aermec Reversible Heat Pump Chiller Hmi100 7.8 Kw R-32 Single-Phase Integrated Wi-Fi With Remote Control Panel Included
FREE FIRST START-UP Technical features Product code : HMI100 Energy efficiency EER: 3.15 COP: 3.70 Energy Efficiency Class for low temperatures: A+++ Energy Efficiency Class for medium temperatures: A++ Performance Cooling Capacity: 7.8 kW Heating Capacity: 10.0 kW Cooling absorption: 2.48 kW Heating absorption: 2.70 kW Cooling water flow rate: 1320 l/h Heating water flow rate: 1700 l/h Sound power level : 69 dB(A) Sound Pressure Level : 54~56 dB(A) Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Refrigerant gas : R32 Installation data Hydraulic pipes diameter: 25 mm (1") Male Dimensions and weight External Unit Dimensions (LxHxP): 1200x878x460 mm Weight of Outdoor Unit: 151 Kg Aermec Air Condensed Heat Pump Outdoor reversible heat pump for air conditioning systems where, in addition to cooling the rooms, high temperature hot water is required for heating or for the production of domestic hot water. For the production of DHW, it must be combined with the DHWT300S domestic hot water storage tank . HMI has been designed to meet the needs of the new construction and renovation markets, replacing or supporting conventional boilers . It can be combined with low temperature emission systems such as underfloor heating or fan coils but also with more traditional radiators, and is already supplied with the main hydraulic components, thus also facilitating the final installation Operational Limits Full load operation up to -25 °C outside air temperature in winter and up to 48 °C in summer. Maximum temperature of water produced in heating mode 60 °C Cooling circuit with economizer Brushless DC axial fans designed for aerodynamic optimization, allowing a reduction of the noise level, but at the same time, an increase in efficiency and air flow. Equipped with base electric resistance to prevent any formation of ice and facilitate the disposal of condensate during heating operation. Electronic expansion valve Main hydraulic components Inverter pump Plate heat exchanger Expansion vessel Safety valve Flow switch Supplied water filter (compulsory installation) Adjustment via multilingual touch screen control panel Management of a 3-way diverter valve (not supplied) for the production of domestic hot water Management of a 2-way valve (not supplied) for shutting off a part of the system Weekly and time band programming Auto-restart function Emergency operation (can activate a substitute heat source) Quick hot water function for rapid heating of domestic hot water Weather dependent mode function for climatic regulation Quiet function for silent operation, programmable with timer Condensation control The activation of the anti-legionella cycle (easily set from the control panel) allows weekly heating of the entire tank to a temperature (max 70°C) such as to eradicate the bacterium responsible for the infection Special golden fin battery Unlike normal coils, this special gold colored silicon-free epoxy coating is able to protect the exchanger from rust and corrosion in areas where the amount of salt present in the air is very high Ewpe Smart APP The system is equipped as standard with the Wi-Fi module; through this module and a special App for iOS and Android devices, available free of charge on the Apple Store and Google Play, it is possible to control the system remotely directly from your smartphone or tablet. Remote control can be done via Cloud using a wireless router connected to the internet. Accessories DHWT300S: (220-240V~50Hz) enamelled steel domestic hot water storage tank. Single-phase power supply, 300-litre capacity with main and secondary coil, 3 kW electric support heater. Magnesium sacrificial anode. Indoor installation, as indicated in the installation manual HMICB15: Connection cable for wired control panel. Cable length 15m IC-2P: Connector for using communication via ModBus or VMF-485LINK. Compulsory accessory if combined with VMF-485LINK, or for third-party supervisory systems VMF-485LINK: Expansion to interface the unit with the VMF communication protocol, making it possible to manage from VMF-E5 or VMF-E6 supervisors Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.
€4.180,00
You have seen 168 out of 206 products