Overview CHAFFOTEAUX CX GREEN 24 EU CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW 2017 MODELÿThe new compact condensing boiler with aluminum alloy condensing exchanger with all the necessary requirements to achieve the required standards in terms of energy savings Technical specifications Product code:ÿ3310508 Energy label specifications according to the European ErPÿ directive ClassÿA heating energy efficiency Sanitary energy efficiency ClassÿA Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Nominal heat input in heatingmax/min (Hi):ÿ23.5/4.5ÿkW Nominal heat input in sanitary max/min (Hi):ÿ23.5/4.5ÿkW Heating max/min thermal power (80øC-60øC):ÿ23/4,4ÿkW Efficiency at nominal heat input:ÿ97.7 / 88% Efficiency 30% of nominal heat input:ÿ104.3 / 94 % Capacity of the expansion vessel: 8 lt Min/max heating temperature (high temperature range)øC 35/82 Min/max heating temperature (low temperature range)øC 25/45 Sanitary temperature min/maxøC 36/60 Instantaneous quantity of hot water T=25øC l/m 13.9 Instantaneous quantity of hot water T=35øC l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply Voltage/Frequency V/Hz 230/50ÿ Total absorbed electrical power W 34ÿ Electrical protection degrees IP X5D Main features CX GREEN EU The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy savings. Operationssolmethane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with T = 25§C. (24kW) Heating comfort Efficiencyfinal 108% with energy savingsfinal 35%. 4 star efficiency of combustion in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones using Expert Control. Self-diagnosis system by code. LCD display. Convenience of installation use Possibility of connection with external probe. Compatible with Expert Control, modulatingÿ and on/off accessories. Easier start-up: automatic purge function and directly accessible combustion adjustment. Save energy and respect the environment Final 20% energy savings in combination with chronothermostat external probe. 40% reduction in CO2 emissions**. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres or As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Open Chamber Boiler Beretta CIAO LX 24 CAI Low NOx LPG 20151437 - NEW Technical features Model: CIAO LX 24 CAI gpl Code: 20151437 Heating/DHW nominal heat input: 26.70 kW Heating/DHW nominal thermal power: 24.06 kW Efficiency at nominal power: 90.1 Efficiency at reduced load (30%): 89.2% NOx class 6 Maximum working pressure heating bar 3 Maximum absorbed electrical power W 47 Quantity of hot water deltaT 25C° 13.8 l/min Dimensions HxWxD 740x400x340 HELLO LX Beretta has renewed the Ciao open flue boiler; the previous model Ciao S CAI now becomes Ciao LX CAI and is placed in Class NOX 6 . Aesthetically it looks like the previous one but its technology is now completely different. The Ciao LX CAI is the entry-level model for approaching Beretta boiler technology; the CAI model has an open chamber and natural draft. The adjectives that identify it are: high quality standard, sturdiness, reliability and economy in purchasing and running. The innovative Double Exchanger is very compact and is of the plate type with the possibility of preheating . It also uses a low consumption Synchronous Circulator (EEI=0.20) with anti-block cycle system and 3-way valve; it is equipped with a smoke control thermostat and by-pass on the heating circuit. Beretta Ciao has a simple, modern and elegant line; the front panel, the real brain of the boiler, is equipped with many functions. Ciao LX CAI is designed to be installed outdoors in partially protected places, thanks to the dedicated accessories and board antifreeze protection down to 0 °C. In colder temperatures it is possible to extend the protection down to -10 °C using the special antifreeze heater kit together with the siphon antifreeze heater kit (optional to be requested separately from the Beretta Technical Assistance Centre). A convenient liquid crystal digital display for viewing the temperature and diagnostic codes, the on/off/summer/winter/reset/heating temperature/ Amico Climate System selector, the domestic hot water temperature selector/pre-heating activation, the Hydrometer. The wall water fittings, the sanitary taps and the gas tap are not included in the package. GUARANTEED SAVINGS AND HIGH COMFORT Gas consumption is always very low . This new version complies with the new standards on combustion gas emissions (NOx 6) e the ErP Directive 2015 ; the boiler benefits from Energy Classes C in Heating and B in Sanitary . It all starts with savings, starting from the purchase price up to consumption management. Maximum comfort with minimum cost. TECHNICAL FEATURES Class B/C NOx class 6 - ErP version, equipped with 6 m low consumption circulator Double exchanger: primary and sanitary plate with the possibility of preheating 8 liter expansion vessel Arrangement for climatic thermoregulation (optional external probe to be purchased through CAT) IPX5D electrical protection degree Optional plumbing fittings, gas and sanitary taps 3-way valve with anti-block cycle system Smoke control thermostat By-pass on the heating circuit Electronic board with self-diagnostic function and antifreeze protection Simple and intuitive digital display Selector on/off/summer/winter/reset/heating temperature/activation of the Clima Amico system Domestic hot water temperature selector/pre-heating activation Hydrometer Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB THE BOILER IS BORN WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA SERVICE CENTER IN ADVANCE Riello Open Chamber boiler mod. START 24 KI Low NOx - NEW ErP CODE 20151434 Product code: 20151434 Energy label specifications according to the European ErP directive Class C heating energy efficiency Sanitary energy efficiency profile XL Class B Characteristics of heating/DHW operation: Heating/DHW nominal heat input: 26.7 kW Heating/DHW nominal heat output: 24 kW Energy efficiency (92/42/EEC) **** Useful efficiency Pn max - Pn min (80°-60°): 90.1-86.4% Profit return 30% (47th return): 89.2% Open chamber with natural draft NOx class: 6 Min/max heating operating pressure: 0.25-3 bar Max absorbed electric power: 47 W Expansion vessel: 8 litres Min/max pressure in DHW: 0.15-8 bar Quantity of hot water with Δt 25°C: 13.8 l/min Quantity of hot water at Δt 30°C: 11.5 l/min Quantity of hot water at Δt 35°C: 9.9 l/min Sanitary water temperature selection range: 37-60°C Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 740 x 400 x 332 ; 30 Kgs Electrical protection degree: IP X5D Power supply: METHANE Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service START 24 KI LN (LOW NOx) Start LN is characterized by a modern design despite its essentiality and is ideal for heating and the production of domestic hot water in small and medium-sized domestic users. Start LN is available in power ratings of 24 and 28 kW with low NOx emissions <56 mg/kWh. Characteristics: Double exchanger: domestic hot water production with plate exchanger for greater resistance to the formation of limescale CTR system for more rapid achievement of the desired comfort and a reduction in consumption and temperature changes in the heating bodies 8 liter expansion vessel Low consumption circulator (IEE≤0.20) Antifreeze function which protects the heating and DHW circuits down to 0°C Standard thermoregulation on the boiler board in combination with the external probe (optional) Can be interfaced with the Remote Control Panel Hydraulic connections available as an accessory kit Standard natural gas operation with possibility of conversion to LPG (G31), this modification is the responsibility of the installer or the technical assistance service Electrical protection degree IP X5D Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER IMMERGAS VICTRIX SUPERIOR 32 KW CONDENSING COMPLETE WITH KIT FOR METHANE FUME EXHAUST - NEW ERP Technical features Product code: 3.025503 Type: INSTANT condensing boiler Energy efficiency Class A heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile: XL Rated useful power: 32 kW Hot water production (∆t 30 °C) l/min: 15.3 Nominal / (real) system expansion tank capacity liters 8.0 / (5.8) System expansion vessel pre-charge pressure bar 1.0 Head available with flow rate 1000 l/h kPa (m wc) 31.0 (3.16) Useful thermal power for hot water production kW (kcal/h) 32.0 (27,520) DHW adjustable temperature °C 30 - 60 DHW circuit minimum dynamic pressure bar 0.3 DHW circuit max pressure bar 10 Min. domestic hot water withdrawal 1.5 litres/min Characteristics Power supply V/Hz 230 - 50 Nominal absorption A 0.78 Power absorbed in stand-by W 5.5 Electrical insulation degree IP X5D Dimensions Dimensions (HxWxD): 835 x 440 x 350 VICTRIX SUPERIOR Low consumption: the modulating circulator automatically adapts operation to the conditions of use and reduces electricity consumption. Maximum domestic comfort: the 2-litre micro-accumulator speeds up hot water delivery and reduces waiting times compared to other instantaneous boilers. High seasonal yields: the wide modulation range of the boiler allows high seasonal yields with a consequent reduction in gas consumption. Display: large, backlit liquid crystal, provides the main operating information. Thermoregulators: optional. They improve comfort and increase energy savings. Eco-friendly technology: complies with the European ErP and ELD Directives, allows you to achieve high energy efficiency classes in heating and hot water production. Ecological class 5 (European Standards UNI 297 and 483): the best for reduced emissions of nitrogen oxides (NOX). Renewable energy: can be combined with solar systems. High flexibility: approved to operate indoors and outdoors in partially protected places. IPX5D electrical protection. Standard antifreeze up to -3 °C. OTHER CHARACTERISTICS: HIGH HYDRAULIC PERFORMANCE With the low energy consumption modulating circulator and the possibility of setting the ∆t on the system, these boilers are ideal on systems equipped with zone and thermostatic valves, to enhance the condensing operation of the appliance, reducing consumption energetic. HIGH EFFICIENCY IN ALL SEASONS Even in mid-season, when energy absorption is limited, efficiency is still high and running costs are reduced thanks to the modulation range from 12.5% ​​to 100% of the power. TECHNOLOGY AND SIMPLICITY OF USE The large and functional backlit liquid crystal display allows easy reading of all the main information relating to operation. Two practical knobs allow you to control the device. § INSTALLATION FLEXIBILITY With 19 cm of space between the water connections and the wall, it can be easily installed in any replacement; moreover, the boilers are designed for internal or external installation in partially protected places. The standard antifreeze protection is down to -3 °C and can be extended, with a suitable optional kit, down to -15 °C. Warranty The guarantee on this article is 24 months from the date of purchase.

Read more less

Beretta MYNUTE X 25 C Low NOx condensing boiler complete with flue gas kit 20163564 Methane - NEW Boiler code 20163564 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL NOx emission class 6 HEATING EXERCISE Heating thermal capacity (max-min) kW 20.00-3.60 Maximum pressure-temperature bar-°C 3 - 90 Expansion tank capacity l 9 HEALTHCARE EXERCISE Nominal DHW heat input (max-min) kW 25.00-3.60 DHW energy efficiency ηwh % 83 DHW production at ∆T= 25°C / 30°C / 35°C l/min 14.3/11.9/10.2 CONNECTIONS Heating inlet - outlet Ø 3/4” DHW inlet - outlet Ø 1/2” Gas inlet Ø 3/4” DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 35 kgs MYNUTE X BERETTA PRESENTS MYNUTE X, THE NEW RANGE OF CONDENSING BOILERS, WITH MANY INNOVATIVE AND ADVANTAGEOUS FEATURES From the primary exchanger in stainless steel to the modern electronic interface, there are numerous new elements that distinguish MYNUTE X in the Beretta offer. The new condensing range, with its 5 models from 20 to 35 kW, with "combined" and "heating only" versions, meets every need for residential comfort. High efficiency, low consumption and ease of installation make MYNUTE X the winning choice, both for new homes and for the replacement market. With MYNUTE X, the novelty of the project merges with Beretta's tradition of excellence, matured in almost half a century of experience in the home comfort sector. Its aesthetics, in line with the Beretta style of the latest generation products, easily integrates into any living context, thanks also to its compactness and installation flexibility. NEW DIGITAL INTERFACE MYNUTE X is equipped with a modern and user-friendly control panel, elegantly covered by a door that lets you glimpse the light of its "green gem", the LED light bar that signals its current operating status. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the functions of MYNUTE X. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE X FEATURES MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS, HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC PREHEATING ACCESSORIES PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES CLOCK FUNCTION WEEKLY PROGRAMMING INTEGRATED IN THE DISPLAY POSSIBILITY OF CONNECTION WITH DOMESTIC HOT WATER TANK (R MODELS) Technology and benefits NEW PRIMARY EXCHANGER IN STAINLESS STEEL THE NEW MYNUTE X EXCHANGER IS MADE OF STAINLESS STEEL, WITH A HIGH SECTION SMOOTH PIPE TO OFFER THE BEST EFFICIENCY AND CLEANLINESS OVER TIME. In addition to the high resistance to the corrosive action of acid condensate, AISI 304 L stainless steel reduces the internal formation of oxides and other electrochemical phenomena typical of installation on old systems. The single wound coil geometry (hydraulic circuit in series) offers a constant flow rate in all sections of the exchanger and intrinsically limits clogging phenomena. Front access facilitates periodic maintenance and cleaning of the combustion chamber. INTEGRATED CLAP MYNUTE X is C10 * approved (formerly 3CEp approved), integrating the non-return valve (clapet) as standard on all models, which makes it "ready to install" in case of installations in pressurized collective flues, for which the non-return valve is a mandatory device. The non-return valve is a specific device which allows the combustion fumes to flow through the ducts in only one direction, i.e. from the burner to the flue gas outlet. Its function is therefore to prevent the fumes from returning to the combustion chamber, compromising the correct functioning of the boiler. This could happen for various reasons, for example in the event of overpressure in the duct of a collective flue system. The non-return valve is generally supplied as a specific optional kit, to be installed at the flue outlet of a boiler in the case of C10 type collective exhausts. In MYNUTE X the non-return valve is positioned inside the boiler (see detail), which translates into quick installation and cost reduction. HYBRID READY MYNUTE X is a HYBRID READY solution. The boiler was born within the offer of HYBRID READY products, which make up the new hybrid technology system conceived and developed in the Beretta Research Laboratories. This system, created to meet the current and future integration and management needs of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. Characteristics INNOVATIVE STAINLESS STEEL CONDENSING HEAT EXCHANGER WITH FRONT ACCESS WIDE MODULATION RANGE (UP TO 1:8) LOW CONSUMPTION MODULATING CIRCULATOR (EEI ≤ 0.20), 6 m EQUIPPED WITH STANDARD FUME CLAP (CHECK VALVE) AND C(10) APPROVED.* LOW POLLUTANT EMISSIONS: CLASS 6 (UNI EN 15502) MYNUTE X IS HYBRID READY: IT WAS BORN TO BE INTEGRATED INTO BERETTA MULTI-ENERGY SYSTEMS THROUGH THE HYBRID REC 10H AND THE HYBRID CONNECTS, AVAILABLE AS ACCESSORIES INSTALLATION FLEXIBILITY: INDOOR, OUTDOOR** AND RECESSED*** INSTALLATION (IN A PARTIALLY PROTECTED PLACE) CLICK-FIT FLUE CONNECTION: FAST AND SAFE, WITHOUT THE NEED OF AN EXTERNAL COLLAR ANTIFREEZE RESISTANCE KIT, HYDRAULIC CONNECTIONS AND EXTERNAL PROBE AVAILABLE AS ACCESSORIES ELECTRICAL PROTECTION DEGREE IPX5D SUPPLIED "DOUBLE T" TEMPLATE COMPATIBLE WITH HYBRID CONNECTORS FOR THE MANAGEMENT OF UP TO TWO SYSTEM ZONES FOR GAS CONVERTING, PLEASE CONTACT AUTHORIZED BERETTA TECHNICAL ASSISTANCE CENTERS COMPATIBLE WITH BeSMART WIFI COMFORT CONTROL AS THERMOSTAT (OTBUS COMMUNICATION), ALLOWING THE MOST ADVANCED FUNCTIONS POSSIBILITY OF INTUBATING FLUES WITH THE SPECIFIC FLUE IN PP Ø60 AND Ø50 Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

Chaffoteaux Condensing Boiler mod. NIAGARA ADVANCE 35 C low NOx Complete with Methane Fume exhaust kit Code: 3310627 Power 35 kW Energy class in heating A Energy class in sanitary A Pickup profile XXL Dimensions HxWxD 900 x 600 x 460 mm Technical data Nominal heat input in heating max/min (Hs) Qn 34.5/3.5 kW Max/min DHW nominal heat input (Hs) Qn 38.3/3.9 kW Efficiency at nominal heat input (60/80°C) Hi/Hs 97.5/87.8% Performance stars (dir. 92/42/EEC) **** NOx class 6 Expansion tank capacity 8l Power supply voltage/frequency 230 / 50 V/Hz Degree of protection of the electrical system IP X5D NIAGARA ADVANCE Niagara Advance , a concentrate of performance, comfort and compactness, combines the technology of the new Advance range with two 20-litre boilers to meet the most demanding domestic hot water needs. MAXIMUM PERFORMANCE New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. MAXIMUM COMFORT Modulation ratio 1:10. Optimized internal silencer. SRA function. Gas transformation with kit included as standard. Ready for Chaffolink connectivity. HEALTHCARE COMFORT 40 liter reserve thanks to two stratified stainless steel inter-accumulators. Permanent availability of domestic hot water even with discharged inter-tanks. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate up to 19.8 l/min with ΔT = 25ºC. Integrated 2-litre sanitary expansion tank. EASY INSTALLATION Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 20% energy savings in combination with Expert Control and the SRA function. Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT BAXI ASSISTANCE IN ADVANCE Technical features ErP energy efficiency class (heating and DHW): A Load profile: XL DHW nominal heat input kW 34 Heating nominal heat input kW 28.9 Sanitary nominal thermal power kW 33 Useful efficiency (pci) Pn - average temperature 70°C: 97.7% Heating expansion vessel capacity l 7.5 Storage tank expansion vessel capacity l 2 Sanitary water temperature adjustment °C 35-60 Boiler capacity 40 l Sanitary water production ∆T 25°C l/min 18.9 Domestic hot water production at discharge ∆T 30°C (1) l/30' 500 Degree of protection: IPX5D NOx class (EN 483) 5 Dimensions (hxlxp): 950x600x466 mm ; 67.5 kgs Power supply: CNG or LPG * Operation with LPG through adjustment by the Authorized Service Centre Cloud Duo-Tec+ Digital control panel The Duo-tec E range of boilers is equipped with a new digital control panel with an even more backlit LCD display, clearer and simpler to use thanks to dedicated and independent keys for regulating the temperature of the domestic hot water and of the heating. The display allows you to view all the information and set the operating parameters in an intuitive and immediate way. Efficiency and savings Wide modulation range: greater efficiency given by fewer starts and stops: with a high modulation ratio, the reduction of the continuous on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions adaptation of the thermal power produced to the power dissipated thus avoiding excessive overheating / cooling of the premises GAC Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic control of combustion to constantly maintain maximum efficiency values. Advantages: there are no manual interventions – reduced measurements, calibrations with this system, the boiler self-adapts to the quality of the gas (methane) and to the length of the flue gas pipes, keeping the efficiency constant the boiler also constantly regulates itself to maintain the maximum efficiency values, favoring a reduction in gas consumption and generating less pollution thanks to the continuous control of emissions. Fully modulating pump with de-aeration The circulation pump can operate at maximum speed, minimum speed or in "automatic" mode: in the latter case, the speed (min./max) will be selected so that the delivery/return ∆T in heating remains constant at 20 °C thus ensuring a significant reduction in pump consumption and, given the lower mechanical stresses (compared to a pump that always runs at maximum speed), also in maintenance costs. During the first ignition phase, we recommend activating the automatic de-aeration function. This function eliminates the presence of air in the heating circuit and therefore avoids any blockages of the boiler, overheating of the system, etc. Guidelines in case of replacement of a conventional boiler with a new condensing one There are two main problems that can be encountered: Flues and smoke exhaust duct Condensate drain To overcome the above, Baxi recommends: the use of a Ø50 mm exhaust pipe Baxi has in fact developed a system that allows easy ducting in existing flues (for 24kW models). For condensing boilers, the novelty is brought about by the low temperatures of the fumes which allow the use of specific plastic materials; however, in the presence of existing 316 stainless steel flues, installed correctly and with gaskets suitable for receiving damp fumes, there are no problems and they can easily be reconnected to the new boilers while it is absolutely not compliant with the use of aluminum flues or smoke pipes . In fact, aluminum is a metal that is not resistant to the acid condensates present in the fumes. (*) Each Ø50 mm diameter bend decreases the length of the drain by 4m the use of the condensate drain pump Baxi has designed this kit to collect the condensate produced by condensing boilers for domestic use: the pump allows the creation of condensate drainage systems in the absence of natural drainage near the boiler. The operation of condensing boilers determines the formation of condensate, due to the principle of condensation. This water therefore needs to be disposed of through special drains. If there is no adequate slope and therefore it is not possible to dispose of the condensate by gravity, it is necessary to install a pump that conveys it towards the drains. The pumps used are also equipped with special non-return valves to avoid bacterial contamination due to any stagnation and return of the waste water. The use of buildings avoiding the use of annoying pipes. Characteristics : Wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control Up to 500 l of hot water in 30 minutes (ΔT 30°C) 40 l stainless steel kettle Digital control panel with large backlit LCD display Compatibility with the Baxi Mago (optional accessory) for remote boiler control DHW expansion vessel available as STANDARD (for 33 kW mod.) and as an accessory (for 24 kW mod.) Connection to rigid and flexible Ø50 mm exhaust pipe: solution for restoring flues - mod. 24 kW total length 40 meters (intake+exhaust) STANDARD installation kit (gas cock / DHW inlet / telescopic fittings) hydraulic system Electric three-way diverter valve Pre-mix burner in stainless steel Flue water exchanger in stainless steel Stainless steel kettle Modulating fan with electronic speed variation Automatic by-pass High efficiency circulation pump with total modulation Pump anti-blocking system and three-way valve which intervenes every 24 hours Heating circuit safety valve at 3 bar 8 bar boiler safety valve Sanitary expansion vessel (2 litres) standard for mod. 33 GA VES Sanitary recirculation arrangement Thermoregulation system Standard climate control (with external probe available as an option) Arrangement for connection to a zone system Control system Safety thermostat against overheating of the water/fumes exchanger Hydraulic pressure switch which blocks the gas in case of water shortage Safety thermostat against fume overheating Temperature control using NTC probes Anti-legionella function Total antifreeze device Electronic thermometer Heating circuit digital pressure gauge Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Hermann Saunier Duval MICRA 4 CONDENSING 30 kW Wi-Fi METHANE boiler complete with fume exhaust kit With integrated miGO Wi-Fi - NEW ErP Model: ErP efficiency class in heating/DHW: A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Domestic hot water production technology: Aquaspeed® Heating Nominal power P min/max heating 80/60 °C: kW 6.3/26.5 Partial load efficiency 30% 40/30 °C %: 108.5 Sanitary Rated power min/max (60 °C): kW 6/30 Specific flow rate (∆T=25 K): l/min 17 Continuous flow rate (∆T=30 K): l/min 14 Min/max DHW temperature: 35/60 °C Electrical characteristics Total absorbed electric power: W 75 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 700 x 390 x 280 mm CNG code (G20) - 10015676 METHANE version MICRA 4 CONDENSING 30 kw "with integrated Wi-Fi Migo" The Micra 4 Condensing condensing boilers, ecological and performing, meet the highest standards in terms of efficiency and comfort, thanks to the exclusive Aquaspeed® technology for the production of domestic hot water. The range includes two combined models of 25 and 30 kW and 3 heating only models of 12, 26 and 30 kW. Characteristics Energy classification 4 stars **** (92/42/EEC) with yields up to 109.2%; Sanitary comfort 3 stars ***(EN 13203-1), thanks to the Aquaspeed® system which guarantees the immediate delivery of domestic hot water at the desired temperature and the sanitary stainless steel plate exchanger with pre-heating function (Kombi models) The control panel on the boiler, with backlit liquid crystal display and negative contrast, makes adjusting Micra 4 Condensing extremely easy and immediate: with a few simple gestures it is possible to adjust the temperatures of the heating and domestic hot water, for any need . Solar Easy: all models in the Micra 4 Condensing range can be combined with solar systems, thanks to special kits. The small dimensions make all Micra 4 Condensing models perfect both for new systems and for replacement in existing systems. Continuous domestic hot water production (DHW) up to 18 l/min (Kombi models) • Low NOx emissions - class 5 (EN 483) Total premix burner and primary exchanger in anti-corrosion Aluminium-Silicon alloy High efficiency and modulating circulator Heating system antifreeze function Built-in Migo Wi-Fi Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED AREA ASSISTANCE SERVICE IN ADVANCE Overview JUNKERS CERAPUR BALCONY ZWB 28-1 EB CONDENSING BOILER for outdoor use COMPLETE WITH FUME KIT - NEW ErP 2016: Wall mounted condensing outdoor boiler with DHW production, combinable with solar thermal systems for DHW using Solar Kit.. Technical specifications Heating and DHW energy efficiency class (ErP): A/A For heating and domestic hot waterÿ Loaded profiles declared XL Nominal heat input (heating): 24.6 kW Nominal thermal power (sanitary): 28 kW Nominal heat input (sanitary): 28.6 kW Thermal efficiency at nominal power 40/30°C: 104.3% Efficiency thermal useful at 30% nominal load 40/30°C: 109.2% Continuous sanitary production: 13.4 l/min Sanitary temperature range that can be set: 40/60°C NOx class: 5 Absorbed electric power: 230 W Degrees of protection: IP X5D Dimensions (D x W x H):ÿ285 x 535 x 775ÿmm; 54kg Version:ÿLPGÿ Main features CERAPUR BALCONY Wall-mounted condensing boiler for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Small and compact,ÿCERAPURÿBALCONY has been designed to solve space problems and resist bad weather, while ensuring maximum comfort in the production of heat and domestic hot water. Advantages: Wall-mounted condensing boilers for outdoor use with DHW production, which can be combined with solar thermal systems for DHW using the Solar Kit. Certifications achieved of tipC13, C33, C63, C83, B33. Suitable for use with 60 mm drains. Class 5 emissions required by UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation. We will remotely control the digital room chronothermostat with the following functions: two fixed heating programs P1 and P2; a programmable P3 heating program with 22 available time slots; setting of the operating temperatures both in heating and in DHW; display of boiler operating status and any anomalies; in combination with the external probe (accessory) the functioning as a climatic control unit is activated which automatically regulates the delivery temperature according to the external temperature. Automatic antifreeze function up to an external temperature of -15°C, on both the sanitary and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (DHW heating). Primary heat exchanger in patented high efficiency aluminosilica alloy. Domestic hot plate heat exchanger for condensing also in DHW. 6 liter heating expansion tanks. Circulator in Energy Class A. The ErP legislation and the new energy labels The future of heating systems Starting fromÿ26 September 2015ÿthe heating systems and for the production of hot water, in order to be placed on the market, will have to comply with theÿErPÿ (Energy Related Products) regulations issued by the European Union. The ErP standards favor the eco-compatible design of products that consume energy from fossil fuels and have the aim of reducing energy consumption and CO2 emissions, as well as providing consumers with transparent and homogeneous information on the energy efficiencyÿ of appliances, favoring comparison. Regulations N 811/2013 and 812/2013 provide for a specific energy labeling of appliances for heating and the production of domestic hot water. Regulations N 813/2013 and 814/2013 prescribe, among other things, the minimum energy efficiency and pollutant emissions requirements that manufacturers of equipment for heating and domestic hot water production must comply with. These regulations therefore raise energy efficiency standards, improving system performance and excluding underperforming technologies from the market. The energy labelÿwill be supplied by the manufacturer with the appliance and will represent a concrete help for the consumer, allowing him to better understand the characteristics of the system, acquire greater awareness of energy saving, allow him to choose better what to buy. The energy label will provide information on the energy class of the product, on a scale between A++ and G, and on other additional notations, such as power and noise emissions. The ErP legislation provides for two types of labelling: the former is supplied by the manufacturer together with the product for heating and/or domestic hot water production appliances the second for systems composed of several elements.ÿ In this second case, the label indicates the levels of energy efficiency that can be reached thanks to all the components used, allowing for an increase in the score attributed to each appliance and increasing the energy class of the system: therefore, the task of whoever builds/installs the system is to provide the consumer with the correct explanatory label . The ErP standards represent an opportunity to develop a market of highly efficient technologies, such as condensing, heat pumps, solar thermal, cogeneration and the integration of different energy sources in a single system. These technologies will have an impact on consumption in the home, approximately 80% of which is due to heating and the production of hot water, and are currently incentivized at the tax level. Junkers Boschÿ already in line with the dictates of the ErP legislation, represent a future that has always distinguished the brand. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

CHAFFOTEAUX CX GREEN 24 EU CONDENSING GAS BOILER COMPLETE WITH LPG FUME KIT WITH FREE DIRT SEPARATOR RUBINETTERIE BRESCIAN !!! Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profile: XL Characteristics of heating/DHW operation: Nominal heat input in heating max/min (Hi) : 23.5/4.5 kW Max/min DHW nominal heat input (Hi) : 23.5/4.5 kW Max/min heating thermal power (80°C-60°C): 23/4.4 kW Efficiency at nominal heat input: 97.7 / 88% Efficiency at 30% of the nominal heat input: 104.3 / 94% Expansion vessel capacity: 8 l Min/max heating temperature (high temperature range) °C 35/82 Min/max heating temperature (low temperature range) °C 25/45 DHW temperature min/max °C 36/60 Instantaneous quantity of hot water ΔT=25°C l/m 13.9 Instantaneous quantity of hot water ΔT=35°C l/m 9.9 Minimum withdrawal of hot water l/m <2 Electrical data: Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 34 Electrical protection degree IP X5D CX GREEN EU   The compact condensing boiler with aluminum alloy condensing exchanger and with all the necessary requirements to achieve the required standards in terms of energy saving. Operation only methane. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars **. Flow rate 13.1 litres/minute with ΔT = 25ºC. (24kW) Heating comfort Efficiency up to 108% with energy savings up to 35%. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 25% to 100% of maximum power. Condensing exchanger in aluminum alloy. Reduced polluting emissions, NOx class 5. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via the Ebus2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones only via Expert Control. Self-diagnosis system by code. LCD display. Comfort of use and installation Possibility of connection with external probe. Compatible with Expert Control, modulating accessories and on/ff. Easier starting: automatic purge function and directly accessible combustion regulation. Energy saving and respect for the environment Up to 20% energy savings in combination with chronothermostat and external probe. 40% reduction in CO 2 emissions **. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy class in heating: A Energy class in sanitary: A Load profile: XL Heating performance: Thermal input (min./max): 3.7/22 kW Useful power (min./max.): 3.95/21.4 kW Useful thermal efficiency: 98.0 % Idle efficiency (60/80°C): 97.5/87.8 % Heating output max/min (80°C-60°C): 21.4/3.4 kW Performance stars (dir. 92/42/EEC): **** Healthcare performance: Thermal input (min./max): 3.7/28.9 kW DHW thermal power (max/min): 24.9/3.5 kW Heating circuit: Expansion vessel pre-charge pressure: 1 bar Maximum heating pressure: 3 bar Expansion vessel capacity: 8 L Min/max heating temperature (high temperature range): 35 / 82 °C Min/max heating temperature (low temperature range): 20 / 45 °C Healthcare Circuit: Min/max domestic hot water temperature: 36 / 90 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C: 12.1 l/min Instantaneous quantity of hot water ∆T=25°C: 15.5 l/min Instantaneous quantity of hot water ∆T=35°C: 10.4 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Max/min domestic water pressure: 7.0 / 0.2 bar Electrical Data: Protection index IPX5D Class 6 NOx Energy efficiency index of the circulator: EEI ≤ 0.23 Minimum ambient temperature of use: >0°C Total absorbed electric power: 67 W Power supply: LPG (G20/G30) Dimensions: (HxWxD): 745x400x385mm; Weight: 29.7kg Methane, LPG and propane air operation with conversion kit included as standard. General characteristics: Pigma is the new CHAFFOTEAUX boiler, which is part of the Advance Range, resulting in the category leader with a completely renewed design, using the innovative SpinTech exchanger, electronic combustion control, integrated Chaffolink connectivity and Expert Control and external probe as standard, guaranteeing extremely high performance with extremely low fuel consumption. Can be installed in partially protected places. SpinTech features: Exchanger that works with a stainless steel monospiral New single coil primary heat exchanger in stainless steel Passage sections increased by 142% compared to the previous version 1 m more head Seasonal yield at 94% Class A+ thanks to the standard thermoregulation accessories Performance certified by the TÜV RHEINLAND Group. Give Comfort: Modulation ratio 1:7 Optimized internal silencer SRA function Gas transformation with kit included as standard Ready for Chaffolink connectivity Advantages: Installation in partially protected places Smoke outlets 80, 60, 50 mm Intuitive electrical connections Up to 20% energy savings in combination with Expert Control and the SRA function Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6.

Read more less

NB: THE CURVE AND THE PIPE FOR THE COAXIAL KIT MUST BE PURCHASED SEPARATELY Rinnai Condensing Boiler Momiji 34 kW Complete with Fume Exhaust Kit with Integrated Wi-Fi Chronothermostat Low NOx LPG REB-KAI3135FF Code REB-KAI3135FF Heating energy class A XL load profile Nominal thermal power kW 30 EN677 efficiency on PCI (80-60°C) % 96.3 Nominal power modulation (80-60°C) Heating kW 12.2 - 30.1 NOx class 6 Maximum electric power absorbed in heating W 97 Electrical power in stand-by W < 3 Supply voltage V/Hz 230 / 50 Degree of protection IPX5D Domestic hot water delivery (ΔT=35°C) l/min 14.0 Domestic hot water delivery (ΔT=25°C) l/min 19.6 Dimensions (H x W x D) (mm)660x440x285 MOMIJI The warm embrace of autumn MOMIJI are the red maple trees typical of the Orient, whose leaves color autumn red, a season that the Japanese experience as "comfort". Thanks to the mild climate and temperatures that are once again welcoming (no longer the torrid heat of summer, not yet the freezing climate of winter), taking time out is even more pleasant. Enjoying your home, as well as the foliage, gives well-being. Momiji best interprets the combination of traditional systems and condensing technology. In fact, while integrating perfectly with different systems, it is designed to optimize the condensation technology on radiator systems, responding concretely to the needs for savings and eco-sustainability of this type of heating, extremely widespread but often unable to fully exploit the advantages of condensation. The heating is smart Momiji offers the standard Wi-Fi chronothermostat (which can also be installed in a room other than that of the generator) to manage and control the boiler anytime, anywhere, in complete freedom. Consumption reports, weekly programming, modification of settings and management of multiple boilers (such as one's own and that of elderly parents, or the house in the mountains) from the same "My Rinnai" APP, available for Android and iOS smartphones. All this and much more to offer you totally smart management. The integrated climatic probe is a standard of Rinnai heat generators: the internal positioning allows you, who use it and you who install it, to avoid masonry work and electrical connections. Thanks to this sensor, you can forget about regulating the temperature in your home and let the generator take care of everything, intelligently adapting its operation according to the weather, more or less cold. So while the boiler operates in climatic regulation with sliding temperature, you can enjoy a perfect balance between comfort and savings, and no worries. Momiji Comfort has never been easier Easy, everywhere Like the Rinnai Infinity water heaters, the Momiji boilers are also specifically designed to facilitate the installer's work. The device is small, light and compact. It is ready to use and does not need to be configured. The flue system is split Ø80/80 and, thanks to the high prevalence of the fan, it is possible to reach up to 30 equivalent linear metres. Thermal exchange Momiji has a copper heat exchange, with a large passage section: this facilitates integration into existing radiator systems and simplifies cleaning operations. This range of boilers is the perfect solution for often imperfect traditional systems. Can also be installed outdoors Momiji is IPX5D certified and has the standard antifreeze kit up to -20°C. Thanks to these characteristics, it can also be installed outdoors without the need for additional protection Integrated condensate neutraliser The Momiji series features the condensate siphon integrated inside the generator, already added with granulate and immediately ready for use. This allows you to simplify installation, always, even when replacing a traditional high temperature generator. The integrated neutralizer, in fact, allows you to eliminate the acidity of the condensate (acidic pH water produced by the normal operation of the heat generator, corrosive for the pipes) without having to face the costs of purchasing and maintaining an external accessory that performs this function otherwise essential. Product Warranty: The warranty on this item is 24 months from the date of purchase.

Read more less