Caldaia a Camera Aperta Ariston HS X 24 CF Low NOx Metano  - NOVITA' Classe di efficienza energetica in riscaldamento C Classe energetica in Sanitario B Profilo di carico XL Portata termica nominale max/min kw 25,8 / 11,0 Potenza termica utile max/min kw 23,2 / 9,8 Portata termica nominale max/min (sanitario) PCI 27/11,0 kW Portata acqua calda a ΔT 25º C 14,2 l/min Basse emissioni di NOx < 56 mg/kWh Tensione di alimentazione 230 V~ (50 Hz) Grado di protezione elettrico IP X4D Dimensioni AxLxP 745x400x315 mm Nuova HS XLa nuova caldaia Ariston HS-X lascia il tradizionale termostato ambiente e può funzionare con sonde di temperatura interne ed esterne. Preparato per la termoregolazione. Queste esclusive periferiche di termoregolazione di Ariston consentono un ulteriore risparmio di gas del 15%, offrendo una maggiore stabilità a temperatura ambiente. Pronta per l'uso con energia solare termica in acqua calda sanitaria. Display multifunzione digitale Circolatore ad alta efficienza a modulazione continua Predisposizione termoregolazione on-off Predisposizione sistemi solari circolazione naturale Sistema di autodiagnosi mediante codice Gestione zone mono-temperatura Scambiatore primario alettato in rame Tecnologia a doppio scambiatore Pressostato di minima integrato Filtri ingresso acqua fredda e ritorno riscaldamento Basse emissioni di NOx < 56 mg/kWh Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Caratteristiche tecniche Modello : GC1200W 28/30 C 23 Codice prodotto : 7716704747 Alimentazione : Metano Efficienza energetica Classe di efficienza energetica riscaldamento : A Classe di efficienza energetica sanitario : A Profilo di carico : XL Efficienza energetica stagionale di riscaldamento d’ambiente : 94% Efficienza energetica stagionale di riscaldamento dell’acqua : 84 % Performance Potenza termica nominale minima 80/60 °C : 6,4 kW Potenza termica nominale 80/60 °C : 27,5 kW Potenza termica nominale massima 50/30 °C : 30,1 kW Temperatura di mandata massima : 82° C Volume del vaso di espansione : 6 litri Tipo di protezione : IPX4D Dati installativi Diametro collegamento mandata e ritorno riscaldamento : 3/4" Diametro collegamento mandata e ritorno : 1/2" Dimensioni e peso Dimensioni (LxAxP) : 395x665x285 mm Peso : 24,5 Kg CONDENS 1200 W Tutta la qualità Bosch in una caldaia a condensazione estremamente compatta Condens 1200 W è la più compatta tra le caldaie a condensazione Bosch, così può essere installata ovunque. Grazie alle ottime prestazioni il risparmio è assicurato! Con tre taglie di potenza disponibili, Condens 1200 W è la nuova caldaia combinata a condensazione Bosch che trova posto ovunque. Questa caldaia rende la gestione del comfort domestico semplicissima: è facile trovarle posto in casa, l’installazione è rapida e l’utilizzo intuitivo. Una caldaia così piccola racchiude però al suo interno tutta la qualità Bosch, sinonimo di elevate performance, affidabilità e lunga durata. Così, con la minima spesa e il minimo ingombro ti assicuri il massimo delle performance!Piccola ma potenteCon Condens 1200 W, Bosch sovverte il binomio grandezza e potenza. Questa caldaia, infatti, trova facilmente spazio in ogni casa, ad esempio nei pensili della cucina, e assicura sempre elevate prestazioni, grazie al vaso di espansione integrato da 6 litri, all’efficienza energetica stagionale del 94% e al range di modulazione 1:5Così semplice da gestire, che ti dimenticherai di averlaLo schermo LCD da 2,4’’ ti permette di regolare la caldaia in tutta semplicità. Inoltre, Condens 1200 W è compatibile con numerose regolazioni Bosch, compresi i termostati smart CT 200 e CR 120. La regolazione climatica integrata (con aggiunta della sonda esterna) consente di adattarne l’utilizzo alle reali condizioni atmosferiche, assicurandoti efficienza e risparmio. Su Condens 1200 W, inoltre,potrai fare affidamento a lungo: è progettata per essere estremamente resistente, grazie ai materiali di alta qualità, ed è semplice da manutenere e pulire. Tutta questa efficienza, a un prezzo davvero piccolo: così il costo di Condens 1200 W si ammortizza in fretta, e a te non resterà che godere di tutti suoi plus!Tutti i vantaggi in breve Dimensioni estremamente compatte, installabile anche nei pensili da cucina Eccellente rapporto qualità-prezzo Utilizzo semplice e intuitivo da display LCD Compatibile con un’ampia gamma di regolazioni Efficiente e performante, si adatta alle condizioni climatiche reali grazie alla regolazione climatica integrata (con l’aggiunta della sonda esterna) Facile da installare e manutenere, è progettata per durare a lungo Garanzia prodotto : La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENTION ! In case of immediate lack of availability, the product will be ordered and shipped within 10 working days Technical features Model: D2CND024A0AA Heating Efficiency class (55°C) : A Fireplace power (Qn) : 2.9 - 23.5 kW Nominal heating power (80°/60 °C): 2.8 - 22.8 kW Nominal heating power (50ç/30 °C) : 3.1 - 24.0 kW Heating efficiency : Up to 108.7% Modulation range : 1:8 Expansion vessel volume: 8 litres Domestic hot water Efficiency class : A Withdrawal profile : XL Temperature range : 35°C ~ 60°C Withdrawal in continuous service (∆T=30°C): 11.3 l/min Withdrawal in continuous service (∆T=25°C): 13.6 l/min Pressure of the water network: 0.5 ~ 10 Bar Technical data Power supply (V,Hz, Ø) : 220~240/50/1 Electric Power Input: 3.5~86W Water content : 1.31 litres Sound power : 39 dB(A) Sound pressure : 49 dB(A) NOx class : 6 Exhaust gas temperature (G20) : 77° C Electrical protection class : IP X5D Installation data Flue diameter: 60/100 mm Maximum length for flue system DN 60/100 : 12.5 m Maximum length for flue system DN 80/125 : 42.8 m Maximum length for flue system DN 80/80 : 125 m Dimensions and weight Dimensions (HxLxD): 590x400x256 mm Weight : 27Kg Simply Serene Guarantee To guarantee you maximum serenity, DAIKIN has studied "SIMPLY SERENIOUS", an extension of the guarantee up to the 5th year of life of your product, which provides for the subscription of a Scheduled Maintenance Plan with specialized Daikin technicians Ultra-compact Daikin D2C condensing boilers for heating and DHW production Why choose a condensing boiler? Daikin condensing boilers are a good solution for those wishing to replace an existing boiler with a more efficient alternative, saving on costs. Our portfolio includes boilers for every need, from the D2C and Full condens and Full Condens TOP wall-hung boilers, to the GCU boiler with built-in thermal storage, to the A2 floor-standing diesel boiler Thanks to the special Daikin-patented exchanger, the D2CND boiler obtains high specific power and high partialization to guarantee comfort and efficiency in any operating mode and in minimum encumbrance. The D2T version, heating only, integrates a diverter valve and can be connected directly to a storage tank for the production of domestic hot water. Ultra-compact and elegant technology The beautifully compact boiler The new D2C condensing boilers are 100% Daikin design. The ultra-compact dimensions make them suitable for even the smallest apartments, where every centimeter saved is space gained A boiler for every need D2C boilers are available in 3 combi versions 24, 28 and 35 kW for heating and instant domestic hot water production. A wide range of heating-only boilers is also available, the D2T, in 5 sizes, from 12 to 35 kW, which can be combined with a storage tank for the production of domestic hot water. You can install them virtually anywhere thanks to their compact size and minimal installation space required. Thanks to the IPX5D degree of electrical protection and the antifreeze kit, they can also be installed outdoors. Do you want to have your heating system under control even when you are not at home? Pair the Lan Adapter to control via APP ! Efficiency and respect for the environment The combustion system with regulation via Lambda Gx probe automatically adapts to the quality of the gas used, methane or LPG, always guaranteeing clean combustion and minimum polluting emissions . Maximum comfort Thanks to a high modulation ratio, up to 1:8 , the output power is automatically varied to always adapt, instant by instant, to the real need of the house in which it is installed. Endless showers? Domestic hot water will no longer be a problem with the D2C boiler with a DHW flow rate of up to 19 l/min in the 35 kW version Cutting-edge technology combines with an attractive and user-friendly user interface Daikin Eye An elegant luminous eye which, thanks to a multi-chromatic LED, signals the operating status of the appliance. In the event of a fault, the LED turns red and the error code is displayed. The easiest way to interact with your boiler! Daikin Heating Online Controller The heating system is always under control, wherever you are! Thanks to the Daikin Heating Online Controller application you can now control and monitor your boiler from the comfort of your smartphone in a simple and intuitive way Monitor The status of your heating system The ambient temperature in your home Energy consumption graphs. Plan The temperature of your home and the operation of the boiler with up to 6 actions per day for 7 days Vacation mode Check it out The operating mode and the set room temperature The system and the production of domestic hot water By integrating third-party products and services through IFTTT services (if this then that) Changing your old boiler has never been easier! Thanks to its small size and IPX5D degree of protection, Daikin D2C can be installed practically anywhere. Its ultra-compact dimensions make it suitable for even the smallest apartments, where every centimeter saved is space gained and its elegant shapes look good in the kitchen. A distinctive element of the 100% Daikin design is also the Daikin Eye: an elegant luminous eye which, thanks to a multi-chromatic LED, signals the operating status of the appliance. Daikin D2C contains the best of condensing technology. The SCOT combustion regulation system automatically adapts to the quality of the gas used, methane or LPG, always guaranteeing clean combustion and minimum polluting emissions. Dimensions and weight reduced to a minimum are possible thanks to the innovative Daikin patented high specific capacity air/fume exchanger body. Heart of the new D2C boiler, it has been designed to obtain the highest thermal power in the smallest size. Functions Eco Mode Return temperature control to optimize condensation Warm start DHW exchanger already heated and ready for use thanks to the memorization of the habits which allows to anticipate the request for domestic hot water Solar connection If the water entering the boiler has been preheated by the solar system, the burner does not ignite, for optimal integration of the solar source Exclusive initiative for Daikin customers On the occasion of the launch of the new Daikin D2C, starting from 1 March 2017 Daikin is giving away the activation cost of Simply Serene. The offer is valid for all those who will purchase a Daikin boiler of any type and who already own a Daikin mono split or multisplit. All the details on daikin.it. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance IN THE ABSENCE OF THIS ITEM, THE BLUEHELIX ALPHA 24 MODEL WILL BE SHIPPED Technical features Model : Bluehelix Tech RRT 24C Energy rating Heating energy efficiency class: A DHW energy efficiency class: A ACS profile : XL Performance Heating thermal capacity: 5.0 ~ 20.4 kW Heating thermal power 80°C / 60°C : 4,9 ~ 20,0 kW Heating thermal power 50°C / 30°C : 4,9 ~ 20,0 kW DHW thermal capacity: 5 ~ 25.0 kW Sanitary thermal power: 4.9 ~ 24.5 kW Minimum efficiency 80°C / 60°C : 97.8% Maximum efficiency 80°C / 60°C : 98.0% Minimum efficiency 50°C / 30°C : 107.5% Maximum efficiency 50°C / 30°C : 106.1% G20 gas pressure : 20 bar G31 gas pressure : 37 bar NOx emission class : 6 Heating operating pressure: 0.8 ~ 3 bar Maximum heating temperature: 90°C Heating expansion vessel capacity: 8 litres DHW operating pressure: 0.3 ~ 9 bar Domestic water flow rate ∆t 25°C : 14 l/min Domestic water flow rate ∆t 30°C : 11.7 l/min Degree of protection : IP X5D Power supply (V,Hz, Ø) : 220~240/50/1 Dimensions and weight Dimensions (HxWxD): 700x420x250 mm Empty weight: 28.0 kg 5 years without worries Ferroli BLUEHELIX TECH RRT boiler Ecological wall-hung condensing boilers with Ferroli Thermobalance™ combustion cell The evolution continues.. The range of generators is equipped with the tested AISI 304 stainless steel exchanger. Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX TECH RRT is at the top of its category. BLUEHELIX TECH RRT achieves one of the highest energy efficiency of space heating in the boiler category: ηs 94% . Furthermore, when combined with the external probe and the Romeo remote timer control, it reaches system energy class A+ Extended warranty with the "5 YEARS WORRY-FREE" formula The quality of Bluehelix TECH RRT is unquestionable, and Ferroli is ready to put it to the test by offering its customers extended warranty coverage which also ensures periodic maintenance and legal checks TOP efficiency even on old systems The exchanger of the THERMOBALANCE™ thermal group by Bluehelix TECH RRT compared with the more classic and widespread steel exchanger used in the past also by the Ferroli Group exclusively on a small series of boilers produced for the English market, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in Bluehelix models This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments, for example due to installation on old systems, the exchanger tends to blockage much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits is formed which hinder the heat exchange and reduce the efficiency below the nominal values . Product plus > Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt > It reaches one of the highest seasonal space heating efficiency in its category: ηs 94% and in combination with the modulating remote control and the optional external probe it reaches the top efficiency class > Class 6 NOx : already in line with the provisions of the ErP regulation, NOx emissions < 56mg/kWh. > MC 2 : M ulti C ombustion C ontrol, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network, such as fluctuations or reduced pressures. > MGR : Methane LPG R eady, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits > Exclusive exchanger-burner system with self-cooled door without insulators: it simplifies maintenance and reduces its cost thanks to a smaller number of perishable parts. > Instantaneous production of domestic hot water with dedicated plate domestic heat exchanger > Hydraulic connections covered by the boiler shell > Large backlit multifunction graphic display for easy and correct parameter setting > Standard by-pass > Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes > FPS : Fumes Protection System . The flue clapet valve fitted as standard on the boiler allows easy connection to pressurized collective flue systems > Designed to simplify and facilitate normal maintenance and cleaning operations > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > ECO function in DHW for greater savings in the period of low use of hot water > 3-star certified comfort in sanitary manufacturing according to EN 13203 > Sliding temperature operation via optional external probe > Low consumption modulating heating circulator > Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection, only for methane operation > Place of installation : also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the help of the optional antifreeze heater kit Innovative Ferroli THERMOBALANCE TM heating unit in its 5 elements Ferroli has oriented the design of the combustion cell and of the Bluehelix TECH RRT exchanger in order to maximize the functional advantages and the constructive sturdiness, as well as the simplicity of maintenance: the single-circuit design means that any air bubbles in the system do not remain trapped in the exchanger, and facilitates cleaning with chemical washing as much as possible, unlike spiral exchangers with double parallel circuit in which if only one of the circuits gets blocked, chemical washing is much more laborious. High flow single circuit stainless steel heat exchanger, resistant to clogging and easy to clean Self-cooled burner door without insulating panel Exclusive special stainless steel hemispherical burner with long-life gasket Intelligent “ Gas-adaptive ” system derived from industrial boilers, which monitors and self-stabilises combustion as the gas + flue conditions vary Offset fan, to facilitate maintenance of the thermal group without disassembly. Integrated smoke anti-reflux clapper for connection to CCS The engine Combustion cell The tube that makes up the BLUEHELIX TECH RRT exchanger is made of AISI 304 stainless steel , a material that allows for the creation of an extremely smooth surface , therefore less susceptible to encrusting agents and deposits. TOP quietness The new design for comfort The particularly careful design of BLUEHELIX TECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections. Remote control Environment and climate BLUEHELIX TECH RRT can be combined with a wide range of remote timer controls that allow remote control and control of the appliance. The ROMEO series is made up of several models, with weekly or daily comfort programming and with the possibility of choosing between wired or wireless connection for both With the connection to the external probe, BLUEHELIX TECH RRT is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, guaranteeing the user greater comfort as the external climatic conditions vary. This function is internal to the electronic board of the boiler and therefore does not require the presence of the remote control , making the configuration operations easier in case of replacement. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Boiler control Control panel and functions The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs . The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the Romeo remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems MC 2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC 2 : Multi Combustion Control , the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary Easy Maintenance Hassle-free maintenance At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance" tm thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: - Internal accessibility is favored by the 3-piece shell with removable side panels. - The electrical box of the electronic card can be easily extracted from the chassis and hooked laterally, leaving free access to the internal parts - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit - The burner door is totally self-cooled by air and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. - The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. - The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. - The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections . - Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Simplified replacement Smoke outlet ø 50 mm The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters. FPS .: Fumes Protection System . The flue clapet valve allows easy connection to pressurized collective flue systems . For installers, the solution of the collective pressure pipe is cheaper Comfort & Safety The designers have thought of a series of functions capable of guaranteeing the quality of the domestic water, the best delivery of power to the heating system combined with a longer life of the appliance Stop And Go function With the use of sanitary taps with mixing, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these " false starts " can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TECH RRT provides an electronic parameter through which it is possible to delay the ignition of the burner by activating it only in the face of actual withdrawals of domestic hot water Sun Easy function BLUEHELIX TECH RRT has been designed to be easily inserted into systems made with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user Sanitary Eco-Comfort function In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable . Reaching maximum comfort certified 3 stars. The efficiency and load profiles according to the ErP directive are at the top of the category External installation and antifreeze function To make the most of the available space, the new BLUEHELIX TECH RRT 24C boiler can be installed recessed into the wall using the special kit. For more critical installations, in completely uncovered places not protected from the elements, the "painted cabinet" kit is also available. In the event that the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost . This function is active with the boiler powered by the gas circuit and under electrical voltage Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

MURAL Riello START 30 Kis LOW NOx condensing boiler cod. 20187407 complete with methane fume exhaust kit Seasonal space heating efficiency class A Water heating energy efficiency class- A Rated power P rated kW 19 Seasonal space heating energy efficiency % 93 HEATING Nominal heat input: kW 20.00 Nominal thermal power (80÷60 °C) kW 24.38 Nominal thermal power (50÷30 °C) kW 26.78 Reduced heat input: kW 3.95 Reduced thermal power (80÷60 °C) kW 3.79 Reduced thermal power (50÷30 °C) kW 4.09 SANITARY Nominal heat input kW 30.00 Nominal thermal power kW 30.00 Reduced heat input kW 3.95 Reduced thermal power (*) kW 3.95 YIELDS Useful efficiency Pn max-Pn min (80°-60°) % 97.5 - 96.0 Useful efficiency Pn max-Pn min (50°-30°) % 107.1 - 103.6 Useful efficiency 30% (return 30°C) % 108.8 Efficiency at average P Range Rated (80°-60°) % - 97.3 Performance at average P Range Rated 30% (30th return) % - 109.0 Combustion efficiency % 97.7 Chimney losses with burner on (Pn max) % 2.3 Losses in the chimney with the burner off % 0.08 Shell losses with burner on (Pn max) % 0.2 FUMES EXHAUST Nox class - UNI EN 15502: 6 Residual head concentric pipes 0.85 m ø 60-100 mm Pa : 60 Residual head separate pipes 0.5 m ø 80 mm Pa : 190 Boiler residual head without pipes and without flange Pa 196 ELECTRICAL CHARACTERISTICS Electric power (Pel max heating - Pel max san.) W 85 - 102 Circulator electric power (1000 l/h) W 42 Supply voltage V - Hz 230-50 IP X5D degree of protection HEATING EXERCISE Maximum pressure bar 3 Minimum pressure for standard operation 0.25 bar Maximum temperature 90 °C Pump: max head available to the system mbar 408 at a flow rate of 1000 l/h Membrane expansion tank l 8 Expansion tank preload bar 1 HEALTHCARE EXERCISE - INSTANT VERSION Maximum pressure bar - 8 Minimum pressure bar - 0.5 Quantity of hot water at ?t 25°C l/min - 17.2 with ?deltat 30°C l/min 14.3 with deltat 35°C l/min - 12.3 Minimum domestic water flow rate l/min - 2 Sanitary H2O temperature selection field. °C - 37/60 Flow regulator l/min – 12 New Start START is the new proposal, completely renewed from a technological and functional point of view, of Riello condensing boilers for small and medium-sized domestic users. START is available in 3 sizes 15, 25, 30 kW, in combined (KIS) and heating only (IS) versions. One of the distinctive features of the new START is the innovative digital control panel with touch keys designed with particular attention to ease of use. High efficiency sanitary exchanger developed by Riello Modern and intuitive touchscreen HMI, with representative icons and capacitive keys with acoustic "buzzer" sound Modern and linear design with under-boiler connection cover available as an accessory for excellent aesthetic integration Specific DHW electronic functions: DHW delay, anti-short cycle function and smart fan Hydraulic unit with DIN standard sequence Low consumption circulator (IEE?0.20) 7 m with high head available as an accessory Ease of installation, integration even in confined spaces and replacement thanks to the wide choice of accessories available as optionals Modulation ratio 1:8 Easy maintenance and cleaning of the combustion chamber thanks to the front access to the exchanger – Seasonal efficiency 93% 8-litre side expansion tank Standard flue gas flange with dedicated flue system Standard thermoregulation in combination with the external probe, available as an accessory Possibility of recessed installation (model 25 KIS and 30 KIS) and outdoors in partially protected places (IPX5D) Assembly crosspiece already integrated in the boiler and power supply cable supplied Natural gas operation as standard with the possibility of conversion to LPG (G31) and propane air using accessories. This modification is the responsibility of the installer or the technical assistance service. IPX5D electrical protection degree. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta CIAO AT 25 C LOW NOx condensing boiler Complete with Fume Kit 20176935 - NEW Technical specifications according to ErP directives Class B heating energy efficiency Sanitary energy efficiency Class A Sanitary load profile - XL Technical features: Nominal heat input kW 25.00 NOx Class 6.00 Total electrical power Watt 102.00 IP electrical protection degree IPX5D Expansion vessel capacity 8 litres Maximum pressure bar 8 Quantity of hot water with Δt=25°C litres/min 14.3 Dimensions Boiler size (HxLxP) mm 715x405x250 CIAO AT with stainless steel heat exchanger BERETTA PRESENTS THE NEW CIAO AT, THE SPECIFIC CONDENSING BOILER FOR REPLACING TRADITIONAL HIGH TEMPERATURE SYSTEMS The new CIAO AT range is proposed in two combined models of 25 kW of power, with methane and LPG respectively. Both models are equipped with DIN standard hydraulic connections, to allow easy replacement of boilers with hydraulic standards other than Beretta. Many new features compared to the previous range. First of all, the new post-exchanger in stainless steel and composite material, which allows it to pre-heat the return water from the primary circuit using the residual heat of the exhaust fumes. The cooled burner, the new electronics and interface, the reduced depth of the boiler which allows installation even in contained recesses, complete the innovative profile of this product, which is preparing to become the reference in the specific segment of the replacement of radiator systems . The simple and linear design, in line with the Beretta style, the compactness of the dimensions and the installation flexibility make CIAO AT easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or recessed, also through dedicated accessories. The Technical Characteristics New layout with compact dimensions and low weight (only 31 kg!) to facilitate transport and built-in installation Traditional copper primary exchanger New and robust finned pack post-exchanger in stainless steel with taste and composite material Sanitary plate heat exchanger with possibility of pre-heating Innovative gas-air combustion supervision system Forced draft sealed chamber boiler with cooled low NOx burner Standard automatic by-pass Modulation range 1:3 Low consumption circulator (EEI ≤ 0.20), 6 m, with anti-blocking Standard analogue hydrometer Low NOx emissions : CLASS 6 (EN 15502-1) Innovative gas valve regulation procedure Sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Maximum installation flexibility: Indoor, outdoor and recessed installation (in a partially protected place) Antifreeze heater kit, hydraulic connections and external probe available as accessories New flue flange with click fit connection: Fast and safe, without the need for an external collar IPX5D electrical protection degree Boiler support template supplied Compatible with BeSmart command Thermostat Dedicated LPG code: for conversion, contact authorized Beretta assistance centres LOW NOX BURNER CIAO AT is able to satisfy the most demanding requirements in terms of low emissions, in order to make heating appliances less polluting. Thanks to the innovative burner of CIAO AT, of the hyperstoichiometric type, a very low flame temperature is obtained as an effect. This characteristic, combined with the cooling of the burner through the heating circuit water, results in a significant lowering of the polluting values ​​of carbon monoxide and nitrogen produced by combustion, such as to satisfy the new limits imposed by the legislation with flying colors ( EU Regulation 814/2013). NEW INTERFACE The new CIAO AT digital interface, designed with particular attention to ease of use, is equipped with a modern backlit display that allows immediate and complete reading of the information on the operating status of the machine, both for the user and for the installer or maintenance technician. Through six intuitively functional keys it is possible to easily adjust both the temperature in heating and DHW, and access the configuration of the machine parameters, rather than resetting the alarm states. UNIVERSAL INSTALLATION Ciao AT is designed to also be installed outdoors in partially protected places or contained recesses (e.g. Edilbox Beretta), thanks to the board's anti-freeze protection down to 0°C. In colder temperatures it is possible to extend the protection down to -10°C using the special antifreeze heater kit. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ferroli condensing boiler Bluehelix HiTech RRT 28 C complete with low NOx methane or LPG fume exhaust kit - New Heating ERP class A Healthcare ERP Class A XL load profile Heating capacity max / min kW 24.5 / 3.5 Max DHW heat input (Hi) kW 28.5 Max / min DHW thermal power kW 28.0 / 3.4 Yield 30% % 109.7 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 8 litres Sanitary flow rate ?t 25°C l/min 16.1 Protection degree (IEC 60529) IP X4D Dimensions HxWxD mm 700x420x320 Bluehelix HiTech RRT The new user interface with «capsense» technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply. Thanks to the energy efficiency of the space heating ηs 94% among the highest in the category (Class A ErP, scale from G to A++) and to the combination with the Connect remote control, able to read the outside temperature directly from the internet, reaches the system energy class A+ (scale from G to A+++). Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Thanks to the "Hydrogen plug-in" system, one of its most important innovations, it is already able to self-regulate to work with mixtures of natural gas and hydrogen, which will soon arrive in Europe, to combat global warming. Designed to fully satisfy the requests for a "robust" product from every point of view thanks to the high-passage primary exchanger capable of guaranteeing maximum efficiency and reliability over time also, and not only, as a replacement for old generators in particularly dirty systems . Silence at the top The particularly careful design of BLUEHELIX HITECH RRT has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. It will be difficult to realize whether the boiler is on or off from its noise, as on older generations of boilers, because even the on/off transients have been optimized according to acoustic comfort. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections Characteristics Boiler with thick stainless steel primary exchanger , with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Class 6 NOx: already in line with the provisions of the ErP regulation from 26.09.2018 (NOx emissions < 56mg/kWh) MC2: Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) MGR: Methane LPG Ready, through a simple configuration the boiler is able to operate on both methane and LPG without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door (without insulators): simplifies maintenance and reduces its cost thanks to fewer perishable parts Instantaneous production of DHW with dedicated DHW plate heat exchanger (only for version C) Hydraulic connections covered by the boiler casing Large backlit multifunction graphic display for easy and correct parameter setting Standard by-pass Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:10 (1:10 mod. 34 C, 1:9 mod. 28 C, 1:7 mod 24 C). Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems ECO function in DHW for greater savings in the period of low use of hot water (only for version C) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (only for methane operation) Place of installation: also for outdoors in a partially protected place up to -5°C as standard and up to -15°C with the aid of the optional antifreeze heater kit Boiler control The new user interface with ''capsense'' technology, without mechanical keys and equipped with a 2.8'' graphic display, allows the user to interact with the product easily and extremely simply, customizing the operation of the appliance in so as to manage the environmental comfort according to one's needs. Thanks to the remote connection via bus, this can also be done directly from the CONNECT remote control, even via smartphone. The boiler is also set up to connect a second room thermostat to dedicated terminals to manage multi-zone systems. TOP EFFICIENCY Even on old systems (replacements) The BLUEHELIX HITECH RRT heat exchanger THERMOBALANCE™ (fig. A) compared to the more classic and widespread steel exchanger (fig. B) also used in the past by the Ferroli Group exclusively on a small series of boilers produced for the market English, and then immediately abandoned in favor of the evolution towards the proprietary steel exchanger used in the Bluehelix models (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values MC2 Multi Combustion Control The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2 : Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can see the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic card can be easily extracted from the chassis leaving free access to the internal parts. - The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections. Any disassembly and replacement of the plate heat exchanger takes place simply by removing the two Allen bolts accessible from the front Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caldaia a Condensazione Riello Residence HM 35 KIS Low NOx Con Kit Scarico Fumi Metano o Gpl 20205319 Caratteristiche tecniche Modello : Residence HM KIS Potenza nominale ERP: 29 kW Alimentazione : Metano/gpl Efficienza energetica Classe di efficienza energetica stagionale del riscaldamento : A Classe di efficienza energetica del sanitario : A Efficienza energetica stagionale del riscaldamento : 93% Potenza termica utile Potenza termica nominale e a regime di alta temperatura : 29,3 kW Potenza termica nominale e a regime di bassa temperatura : 9,8 kW Efficienza Utile Alla potenza termica nominale e a regime di alta temperatura ** ƞ4 % 87,9 Al 30% potenza termica nominale e a regime di bassa temperatura *** ƞ1 % 97,9. Altre specifiche tecniche Portata termica riscaldamento (max-min) kW 30,0-3,5 Portata termica ACS nominale (max-min) kW 34,9-3,5 Tensione di alimentazione V-Hz 230-50 Grado di protezione IP IPX5D Classe NOx 6  Riscaldamento Pressione-temperatura massima bar-°C 3-90  Pompa: massima prevalenza disponibile(alla portata di 1000 l/h) **** mbar 400 Capacità vaso espansione a menbrana l 9 Dimensioni, peso Dimensioni caldaia (HxPxL) mm 740x275x420  Peso netto kg 30 Residence HM RESIDENCE HM INAUGURA UNA NUOVA GENERAZIONE DI CALDAIE A CONDENSAZIONE, CHE SANCISCE L’IMPEGNO DI RIELLO PER UN’INNOVAZIONE TECNOLOGICA AL SERVIZIO DEL RISPARMIO ENERGETICO E DELLA SOSTENIBILITÀ, OFFRENDO UN COMFORT SEMPRE PIÙ RISPONDENTE ALLE MODERNE ESIGENZE DELL’UTENTE RESIDENCE, tra le gamme più rappresentative dell’offerta Riello in termini di affidabilità e performance, si rinnova profondamente nel design e nella tecnologia per dar vita a RESIDENCE HM. Tante sono le novità di questa nuova caldaia murale a condensazione rispetto alla serie precedente: dall’elevata modulazione 1:10 su tutta la gamma, al nuovo scambiatore di calore in acciaio inox con rinnovato controllo di combustione adattivo, fino al nuovo pannello di controllo touch, per citare le principali.Denominatore comune di tutta la gamma la ricerca tecnologica finalizzata al risparmio energetico per offrire un comfort sempre più elevato: dalla silenziosità alle prestazioni, tante sono le caratteristiche migliorative di RESIDENCE HM, che l’utente non mancherà di apprezzare. La nuova gamma si presenta in una veste estetica completamente rinnovata, dal carattere moderno ed evoluto, che si armonizza con facilità nei diversi contesti residenziali, sia nella sostituzione che nella nuova edilizia. Inoltre come tutte le caldaie Riello di nuova generazione, RESIDENCE HM è orientata al futuro: è infatti predisposta per operare con miscele di gas naturale e idrogeno fino al 20%, contribuendo così a ridurre l’impatto ambientale e le emissioni delle caldaie a condensazione nei prossimi anni. ALTE PRESTAZIONIGrazie all’ampia modulazione 1:10, al nuovo controllo intelligente di combustione ACC e ai rinnovati scambiatori primario e sanitario OTTIMO COMFORT SANITARIOAcqua calda senza oscillazioni ditemperatura, per un comfort ottimale durante i prelievi, con profilo di carico al vertice della categoria.INTERFACCIA TOUCHL’interfaccia di RESIDENCE HM mantiene la semplicità e l’intuitività di utilizzo, innovandosi con una caratterizzante estetica touch. ELEVATA SILENZIOSITÀ RESIDENCE HM si distingue per la silenziosità operativa, che la rende la soluzione ideale per installazione all’interno dell’abitazione. DESIGN COMPATTOLa compattezza, trasversale su tutte le taglie, rende RESIDENCE HM idonea anche per installazione in un pensile. La caldaia è installabile anche a incasso o all’esterno, in luogo parzialmente protetto INSTALLAZIONE E MANUTENZIONE SEMPLIFICATEGrazie al sistema di controllo combustione adattivo ACC, alla compattezza e all’accessibilità frontale ai componenti. TECNOLOGIA AL SERVIZIO DEL COMFORT E DELL’EFFICIENZA ENERGETICA Nuova flangia fumi con collare di sicurezza a rapido serraggio.  Ridotte emissioni di NOx: CLASSE 6 (EN 15502). Ampia modulazione 1:10 su tutta la gamma, per un elevato risparmio energetico. Efficienza stagionale 93%. Nuovo scambiatore in acciaio inox con rinnovato sistema di controllo della combustione ACC Combustion. Vaso di espansione laterale da 9 litri. Scambiatore a piastre ad elevate prestazioni sviluppato da Riello. Nuovo circolatore digitale modulante a basso consumo. Nuovo gruppo idraulico con sequenza di attacchi di tipo DIN, per una sostituzione semplificata. Copertura superiore e mensola inferiore realizzate con nuovi materiali costampati per favorire longevità e resistenza. NUOVO CONTROLLO DI COMBUSTIONE ELETTRONICO ADATTIVORESIDENCE HM è dotata di un nuovo sistema intelligente dicontrollo della combustione ACC (active combustion control), in grado di adattarsi automaticamente al combustibile (metano, GPL, ecc.) senza ricorrere a codici specifici o a kit di trasformazione accessori. Questo innovativo e sofisticato sistema di controllo consente l’auto-regolazione della combustione, eliminando la necessità di taratura iniziale. Il sistema ACC è inoltre in grado di adattare la caldaia ad operare con diverse configurazioni di gas, differenti lunghezze dei tubi e a diverse altitudini (entro i limiti progettuali previsti). Il sistema ACC è in grado inoltre di effettuare autodiagnosi per una combustione sempre sotto controllo, con emissioni costantemente ben inferiori ai limiti imposti dalla normativa. SCAMBIATORE SANITARIO A PIASTRE AD ELEVATE PRESTAZIONILo scambiatore sanitario di RESIDENCE HM “high performance”, sviluppato da Riello, offre un ottimo comfort, unitamente a rapidità di raggiungimento del set point e di stabilità della temperatura durante il prelievo. SILENZIOSITÀ DI FUNZIONAMENTOGrazie anche ai nuovi materiali introdotti, RESIDENCE HM sidistingue per la silenziosità di funzionamento, caratteristica migliorativa (circa il -10%) rispetto alla precedente gamma omonima e particolarmente apprezzabile nel caso di installazione della caldaia all’interno dell’abitazione. Il range di rumorisità si attesta infatti su livelli dai 45 db(A), per il modello 30 KIS, fino a 48 db(A) per il modello 20 IS. FACILITÀ DI INSTALLAZIONE E MANUTENZIONEIl sistema ACC semplifica l’installazione. In fase di accensione la nuova caldaia non necessita di taratura ed è sufficiente selezionare la tipologia di gas combustibile utilizzato dalla caldaia tramite l’interfaccia, se diverso da quello di default (metano). Le dimensioni ridotte e il peso contenuto rendono il prodotto facilmente trasportabile e movimentabile in fase di installazione. L’accessibilità frontale ai componenti rende inoltre il prodotto più semplice da manutenere per il tecnico preposto, velocizzandone i tempi di intervento. INTEGRABILITÀ IN SISTEMI IBRIDIRESIDENCE HM è in grado di integrarsi nei sistemi ibridi Riello multi-energia (gas/ elettricità e rinnovabili), attraverso l’offerta di accessori della piattaforma Hi, Comfort. NUOVA INTERFACCIA DAL DESIGN EVOLUTO E MODERNO RESIDENCE HM è dotata di una nuova interfaccia digitale dal design accattivante, che conferisce a RESIDENCE HM un carattere moderno, in lineacon i canoni estetici attuali. Progettato con una particolare attenzione alla facilità di utilizzo, il pannello di RESIDENCE HM permette di accedere in modo intuitivo a tutte le regolazioni e ai parametri della caldaia e del sistema con un semplice “touch” su sette punti della sua superficie. A conferma dell’operazione avvenuta si genera un “buzzer”, il caratteristico segnale acustico. Anche il display HMI da 2,8’’ è stato concepito all’insegna della semplicità di comunicazione per l’utente, attraverso l’utilizzo di icone che rendono più immediata la comprensione rispetto ai testi. LO SGUARDO AL FUTURO La gamma RESIDENCE HM, come tutte le caldaie Riello di nuova generazione, nasce predisposta per funzionare con miscele di gas naturale e idrogeno - fino a un massimo del 20% - un primo importante contributo verso il processo di decarbonizzazione avviato dall’Unione Europea ROADMAP IDROGENO 100%E c’è di più. Riello punta ora all’utilizzo dell’idrogeno puro come fonte di energia completamente priva di CO2 . Per questo, la nuova gamma RESIDENCE HM è stata testata per operare con la combustione dell’idrogeno al 100% tramite un kit di conversione, al momento in via sviluppo nei nostri laboratori. L’IDROGENO COSTITUISCE IL SISTEMA ENERGETICO SOSTENIBILE DEL FUTURO Disponibilità in enormi quantità Producibilità mediante metodi a basso impatto e in modo sostenibile da fonti rinnovabili, quali l’energia eolica, fotovoltaica e le biomasse Riduzione delle emissioni inquinanti Opportunità di contribuire al processo di decarbonizzazione UNA CALDAIA PER MOLTEPLICI SOLUZIONI LA DISPONIBILITÀ DI UN’AMPIA OFFERTA DI KIT ACCESSORI DEDICATI MOLTIPLICA LE SOLUZIONI IN TERMINI DI APPLICAZIONI INSTALLATIVE DI RESIDENCE HM, UNA CALDAIA VERSATILE, NATA PER RISPONDERE ALLE DIVERSE ESIGENZE IMPIANTISTICHE E DI COMFORT Compattezza, peso ridotto e grado di protezione elettrica IPX5D permettono a RESIDENCE HM di essere installata con facilità non solo all’interno dell’abitazione, ma anche all’esterno (in luogo parzialmente protetto) e a incasso in box. Il prodotto è ideale anche per la sostituzione, favorita dalla disponibilità di kit accessori di conversione, nel caso la caldaia da sostituire non sia Fornita di attacchi DIN Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 30 CS/1-5 Article code : 0010022022 Power supply: methane or LPG Performance Heating power : 3.5 ~ 30.0 kW DHW power : 3.5 ~ 30.0 kW Withdrawal flow rate (ΔT = 30K) : 14.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 108.7% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 39.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS EQUIPPED WITH AUTOMATIC COMBUSTION CONTROL. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Baxi Luna Air 24 kw built-in boiler complete with Fumi-new ErP Methane or LPG exhaust kit Cod. A7736261 Technical features Sanitary nominal thermal power: 24 kW Heating nominal heat input: 20.6 kW Heating rated thermal power 80/60°C: 20 kW Heating rated thermal power 50/30°C: 21.8 kW Reduced thermal power 80/60°C: 3.4 kW Reduced thermal power 50/30°C: 3.7 kW Useful efficiency (pci) PN – average temperature 70°C: 97.7% Nominal efficiency 50/30°C: 105.8% Seasonal space heating energy efficiency class: A Seasonal energy efficiency class of the sanitary fixture: A Water heating - Load profile: XL NOx class 6 according to EN 15502 Emission of nitrogen oxides NOx 15 mg/kWh Degree of protection: IPX5D Primary water/gas coil exchanger in AISI 316L stainless steel Secondary water/water exchanger in oversized stainless steel Electric 3-way diverter valve Modulating fan with electronic speed variation Automatic by-pass on the heating circuit Dimensions (boiler) hxwxd: 770 x 470 x 238 mm Dimensions (case) hxwxd: 1170 x 600 x 240 mm MOON AIR Luna Air is the new range of condensing boilers ideal for outdoor installations. remote digital control panel with LCD display as standard suspended installation in partially protected places open-air suspended installation with cover kit, available as an accessory minimum operating temperature: -15°C antifreeze function and IPX5D protection degree wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control built-in installation: the ultra-compact dimensions of the boiler, 770x470x238 mm, allow it to be installed in the majority of boxes on the market; recessed telescopic fittings kit available as an accessory predisposition for combination with the Baxi integrated solar system connection to Ø50 mm rigid and flexible drain pipe - for mod. 24 kW total length (exhaust+intake) 40 metres: solution for renovating flues and in case of replacement of a natural draft boiler with a condensing boiler With Luna Air it is possible to create three different installations: suspended installation in partially protected places; open-air wall-hung installation with cover kit; recessed installation with containment box Product Guarantee : All products for sale on our site are new and packed. The warranty on this product is 24 months from the date of purchase

Read more less

Immergas VICTRIX TERA 24 V2 low nox methane condensing boiler complete with flue gas exhaust kit General Features Model: VICTRIX TERA 24 V2 Code: 3.032927 Power supply: methane Heating Energy Efficiency Class: A Energy Efficiency Class Sanitary: A Nominal domestic hot water heat output (useful): 28.0 kW Nominal heating heat output (useful): 24.0 kW Technical data sheet (Directive 92/42/EEC method) Burner type: Blown air Power at rated load: 24.0 kW Power at 30% of nominal load: 7.2 kW (at 50/30 °C) Efficiency at nominal load: 106.5 Efficiency at 30% of nominal load: 107.5 (at 80/60 °C) Efficiency at nominal load: 97.8 Efficiency at 30% of nominal load: 96.8 Electrical auxiliaries at rated load: 41 W at medium load: 60 W at zero load: 2 W Operating temperatures Average temperature: 50 °C Return temperature: 40 °C DHW temperature: 55 °C With ACS priority: yes TEST conditions at nominal load Average generator temperature: 70 °C Performance correction factor: 0.2 intermediate load Average generator temperature: 70 °C Performance correction factor: 0.2 with no load Power loss: 54.4W Fraction of losses to the mantle: 0.36 Dimensions Legend: V - Electrical connection G - Gas supply AC - Domestic hot water outlet ACV - Domestic hot water inlet kit solar valve (optional) AF - Sanitary water inlet SC - Condensation drain (internal diameter minimum Ø 13 mm) M - System delivery R - Plant return Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Inoa S 24 Reference : 3310664 EU Certificate Number: 0085CU0394 Type of Installation : C10-C13-C23-C33-C43-C53-C63-C83-C93-B23 Gas Category: I2H Energy Performance Nominal heat output in Heating: 4.7 ~ 20.0 kW Heating Thermal Power 60°/80° C : 4,6 ~ 19,6 kW Thermal Power : 4.9 ~ 21.0 kW Nominal heat output in DHW: 4.7 ~ 23.5 kW DHW thermal power: 4.6 ~ 23.0 kW Combustion efficiency : 98.4% Efficiency at nominal heat input 60°/80° C : 88.2 ~ 98 % Efficiency at nominal heat input 30°/50° C : 94.6 ~ 105 % Efficiency at 30% at 30° C Hi : 108.5 % Idle efficiency 60°/80° C : 87.4 ~ 97.1 % Performance Stars : ★★★★ Class : A Maximum shell heat loss ΔT = 30°C : 0.2% Losses to chimney burner in operation: 1.6% Heating Expansion vessel pre-charge pressure: 1 bar Maximum heating pressure : 3 bar Expansion vessel capacity: 8 l High temperature heating temperature : 35° ~ 82° C Low temperature heating temperature : 20° ~ 45° C Domestic hot water DHW temperature : 36° ~ 60° C Specific flow rate in DHW : 11 l/min Instantaneous quantity of hot water ΔT=25°C : 13.2 l/min Instantaneous quantity of hot water ΔT=35°C : 9.4 l/min Stars Sanitary comfort : ★★★ Minimum withdrawal of hot water: 2 l/min Sanitary water pressure: 0.2 ~ 7 bar Withdrawal profile : XL Emissions Residual head : 100 Pa NOx class : 6 Fume temperature G20 at 60/80 : 54° C CO 2 content: 9.4% Maximum flue gas flow rate: 37 Kg/h Excess air : 21% Electrical data Power supply (V,Hz, Ø) : 220~240/50/1 Total absorbed electrical power: 62 W Minimum ambient temperature of use: >0° C Electrical system protection degree: X5D Dimensions and weight Dimensions (HxWxD): 745x400x319 mm Weight : 26Kg Inoa S Compact wall mounted boiler INOA S is the new Chaffoteaux brand condensing boiler, designed to guarantee great performance and high robustness: the primary exchanger in stainless steel and the metal front panel combine efficiency and durability Installation in partially protected places MET/LPG operation with standard kit AP operation with optional kit Compatibility with positive pressure collective flues (C10) Comfort in Heating Primary condensing exchanger in stainless steel. Up to 108% efficiency and 93% seasonal efficiency. 4-star combustion efficiency in compliance with the EN92/42 standard. Modulation range from 20% to 100% of maximum power. Reduced polluting emissions, NOx class 6. High efficiency circulator with continuous modulation to improve acoustic comfort and reduce energy consumption. Arrangement for integration into a heating system via Ebus 2 communication protocol (boilers, solar, system management modules and modulating thermoregulation accessories). Possibility of managing single-temperature and multi-temperature zones via Expert Control. Ready for Chaffolink connectivity. Sanitary comfort Sanitary heat exchanger in stainless steel. Domestic water performance: stars *** Flow rate 13.2 litres/minute with ΔT = 25ºC (24kW) and 16 litres/min with ΔT = 25ºC (29kW). Comfort of use and installation Single-volume structure and metal front panel for greater sturdiness. LCD display and front hydrometer for better accessibility. Front electrical connections. Extremely easy access to components during maintenance (DHW exchanger, hydraulic unit, etc.) Possibility of connection with external probe. Compatible with Expert Control, modulating and on/off accessories. Easier starting: automatic purge function and directly accessible combustion regulation Energy saving and respect for the environment Up to 35% energy savings in combination with a modulating chronothermostat and external probe. 40% reduction in CO 2 emissions Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less