Sime MURELLE HT 25 Wall-mounted Condensing Boiler Class A 8115106 LPG Complete With Flue Gas Kit Included General characteristics Brand: Sime Model: MURELLE HT 25 Power supply: LPG Code: 8115106 Technical data sheet Sanitary thermal power kW: 1.75÷24.5 Heating thermal power (50-30°C) kW: 1.81÷26.4 Sanitary flow rate (EN 13203) l/min: 11.4 Heating energy efficiency class: A Heating sound power dB(A): 51 Health energy efficiency class: A Declared load health profile: XL Weight kg: 32.4 Dimensions Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from date of purchase.

Read more less

BOX NOT INCLUDED IN THE PRICE JUNKERS BOSCH CERAPUR CONDENSING BOILER BUILT-IN CONDENSING ZWB 28-1 EI 24 kW INCLUDING SMOKE KIT - NEW ErP ErP energy class (Heating and ACS) For heating and domestic hot water production Nominal heat output in domestic hot water kW 28 Nominal heat output (heating) 40/30 °C: 25.7 kW Nominal heat output (heating) 80/60 °C: 24.0 kW Minimum heat output (domestic hot water): 7.4 kW Sanitary flow rate ΔT = 30 K: 13.4 l/min NOx class: 5 Voltage v(AC): 230 Frequency HZ: 50 Electrical power consumption: 230 W IP Protection Grade: X5D Dimensions: 243 x 533 x 775; 47 Kg As standard: Controllable from home - Manage the boiler directly from inside the home, using the TF 25 remote control , supplied as standard Junkers Bosch With the strategic plan 20/20/20, Europe has the objective of producing 20% ​​less CO2, using 20% ​​more renewable energy and consuming 20% ​​less primary energy. All this by 2020. To achieve these objectives, the EU has issued the ErP (energy related products) Directive which specifies the minimum eco-design requirements for energy-using equipment, including energy efficiency. The heating world will also be affected by this revolutionary change. In fact, from 2015, the energy efficiency of boilers will be based on new performance indices that will take seasonal performance into account. Among the most significant changes in the new methodology for measuring seasonal efficiency are the introduction of different nominal temperatures, operation even at partial loads and in standby mode. The new methodology will make it possible to evaluate the performance of a boiler in real conditions, based on the efficiency level calculated over the course of an entire year. CerapurIncasso CERAPUR INCASSO is designed for concealed installations and encloses maximum convenience in just 250 mm of depth. Ideal for solving space problems, it does not alter the aesthetic beauty of homes. CERAPUR INCASSO in fact integrates perfectly into the facade thanks also to the possibility of painting the "shell" the same color as the wall. Boiler for concealed installations - Space saving inside the home and no aesthetic impact on the outside thanks to the installation in a niche in the wall Controllable from inside the home - Management of the boiler directly from inside the home, using the TF 25 remote control, supplied as standard Robust and reliable - Robustness and reliability of the boiler are guaranteed thanks to the construction of the primary exchanger in aluminium alloy Electrical insulation - The boiler has an electrical insulation rating of IPX5D Characteristics: Outdoor condensing wall-mounted boilers with DHW production that can be combined with solar thermal systems for DHW using Solar Kit. Certifications obtained of type C13, C33, C63, C83, B33. Suitable for use with Ø 60 mm drains. Emissions in class 5 as foreseen by the UNI EN 297, UNI EN 483 and UNI EN 15502 standards. External installation indicated in a specific niche, dedicated to the built-in shell (acc. 978). Automatic antifreeze function up to an external temperature of -15 °C, both on the domestic hot water and heating sides. Fully automatic filling function for the heating circuit. Continuous power modulation (sanitary and heating). Patented high efficiency aluminum-silicon alloy primary heat exchanger. Larger plate heat exchanger for domestic hot water condensation. 6 litre heating side expansion vessel. Circulator in Energy Class A. Accessories Built-in Box for Boilers: CALD_0021210 Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Sime MURELLE HT 30 Wall-mounted Condensing Boiler Class A 8115107 LPG Complete With Flue Gas Kit Included General characteristics Brand: Sime Model: MURELLE HT 30 Power supply: LPG Code: 8115107 Technical data sheet Domestic hot water thermal power kW: 2.1÷29.5 Heating thermal power (50-30°C) kW: 2.17÷31.8 Sanitary flow rate (EN 13203) l/min: 14.0 Heating energy efficiency class: A Heating sound power dB(A): 52 Health energy efficiency class: A Declared load health profile: XL Weight kg: 34.0 Dimensions Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from date of purchase.

Read more less

ATTENTION! The built-in unit is purchased separately. Technical Features Model : ecoINWALL Plus Product code : 0010017154 Energy efficiency class in heating: A Energy efficiency class in sanitary ware: A Performance Stars: ★★★★ Heating power: 5.2 kW ~ 25.1 kW Sanitary power: 5.2 kW ~ 25.6 kW Domestic hot water production (ΔT = 30K) 12.1 l/min ACS temperature regulation: 35°C ~ 60°C Hot water comfort stars: ★★★ Expansion vessel capacity: 8 litres NOx class : 5 Degree of protection: IPX5D Power supply: Methane Optional accessories Built-in box 0010030848 Installation data Flue gas connection diameter: 60/100 mm Possible diameter of exhaust gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic pipe diameter: 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 845x515x234 mm Empty weight: 35.5 kg Warranty extension to 7 years Vaillant ecoINWALL plus VMW built-in condensing wall-mounted boiler So discreet that it disappears into the wall ecoINWALL plus VMW is a 26 kW built-in wall-mounted boiler for domestic heating and domestic hot water production. With the combination of the convenient built-in, it allows for wall installation that disappears completely into the wall in just 25 centimetres. With this solution Vaillant responds to the needs of residential construction: limited space inside homes and aesthetic constraints that prevent the installation of exposed boilers on balconies and terraces. Since it is dedicated to the outside of the building, the boiler is equipped as standard with frost protection up to -15°C. From the display of the dedicated remote control, the user is able to carry out control, adjustment and reporting of any anomalies, remaining comfortably inside the home. Thanks to the pre-heating system and the NTC probes that monitor and prevent temperature changes, the boiler guarantees maximum comfort in domestic hot water and heating. The new modulating pump and the new stainless steel exchanger ensure great savings on electricity and gas consumption. Furthermore, combined with the multiMATIC 700 control unit, it allows you to refine the thermoregulation and further reduce management costs. ecoINWALL is not only the intelligent answer for modern installations, but a concentrate of performance, savings and technology that does not require any space inside homes. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoINWALL plus VMW The built-in solution, in the combined version Frost protection up to -15°C and IPX5D High sanitary comfort thanks to adjustable preheating Stainless steel exchanger Modulation 1:5 8 litre expansion vessel Vertical hydraulic connections Simplicity in replacing standard balcony boilers thanks to a complete range of accessories Automatic system loading function Thermoregulation with remote control as standard inside the home Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE AND CAN BE ADJUSTED TO LPG. FOR INFORMATION, CONTACT THE AUTHORIZED ASSISTANCE CENTER IN YOUR AREA IN ADVANCE Technical Features Model : ecoTEC Pro VMW 236 Methane Model with Wi-Fi: 0020256400 Energy Class in Heating: A Energy Class in Sanitary: A Heating Power: 5.2 - 23.0 kW Power in Sanitary: 5,2 - 23,0 kW Sampling rate (ΔT = 30K): 11.0 l/min DHW temperature regulation: 35° - 65° C Possible diameter of exhaust gas outlets: 60/100 mm; 80/125; 80/80; 60/60 mm Gas Pipe Diameter: 12.70 mm (1/2") Hydraulic Pipe Diameter: G3/4" Dimensions (HxWxD): 720x440x338 mm Warranty Program 7 All Vaillant condensing boilers are included in the Warranty Program 7. By purchasing a Vaillant condensing boiler you can extend the warranty from 2 to 7 years and benefit from exclusive advantages: No fixed call fee Free labor Free original spare parts EcoTEC Pro VMW Boiler All models in the ecoTEC pro VMW range have an efficiency etas = 94%. For this reason, if combined with a class VI thermoregulation (such as vSmart), they achieve a system efficiency of 98% and therefore the ErP system energy class in heating A+ . The ecoTEC pro VMW boiler (heating and DHW production) is available in the 23kW and 28 kW power ratings. ecoTEC pro was born as the natural evolution of Vaillant's consolidated technology and experience in condensing technology. ecoTEC pro was designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. With the new high-efficiency pump and new electronics, ecoTEC pro consumes very little electricity, guaranteeing significant savings throughout the year. Its ease of regulation makes it the ideal boiler for all users, in addition to having an extremely simple interface with clear text and a backlit display to facilitate its use. ecoTEC pro is the ideal boiler for Vaillant-on-Vaillant replacements: installation is quick and easy, as is adjusting the operating parameters. The ecoTEC pro range includes: the combined version, the smart connectivity version in combination with vSMART, a version designed for installation in multiple collective flues and two versions for installations in single collective flues. ecoTEC pro CM is also the right choice for replacing boilers in multi-family complexes or for more complicated installations. Vaillant in fact offers a range of products suitable for flue systems as well as multiple options for accessories dedicated to the boiler: a flue gas pressure switch, combined with electronics, automatically adjusts the value to be set for the length of the vertical ducting so as to correctly evacuate the exhaust fumes. The ecoTEC pro CS models are equipped with a dedicated kit, included in the supply, consisting of a non-return valve, 87° bend and 80/125mm rigid section for connection to a single collective flue Small size The small size of ecoTEC pro VMW allows it to be installed in any environment: ✔ 70cm height ✔ 44cm width ✔ 35cm depth (identical to the previous version) Available with additional approval for outdoor installations up to -5°C Control your heating with your smartphone Thanks to its free App, vSMART represents a new approach to home efficiency, transforming smartphones or tablets into remote control systems and allowing you to control and regulate ecoTEC plus at any time, from any place, quickly and intuitively. Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can transform your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, by using the Wi-Fi network you can control and regulate the comfort of your home wherever you are in a quick and extremely intuitive way vSMART is designed to ensure comfort and extreme ease of use and can be installed on the wall by connecting it to the electrical network or placed wherever you prefer using common AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design it integrates perfectly into any environment allowing you to adjust your single system and possibly the load of a boiler for domestic hot water with a simple click. The benefits of vSMART are not limited to convenience. Using this product you can drastically reduce the " start/stop " cycles of the boiler, thus allowing you to save on gas and electricity and extend the life of your appliance. Characteristics Heating and domestic hot water solution Reduced installation costs Sanitary comfort even with low flow rates High efficiency pump Intuitive display and simplified adjustments Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta EXCLUSIVE X 30 C low NOx condensing boiler complete with flue gas exhaust kit 20187795 Methane Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL Characteristics of heating/DHW operation: Heating thermal capacity (max-min) kW 25 - 4.9 Nominal DHW heat input (max-min) kW 30 - 4.9 NOx class 6 IP X5D degree of protection Supply voltage V-Hz 230 - 50 Max pressure-temperature bar-°C 3 - 90 Max pressure bar 8 Boiler dimensions (HxPxL) mm 740x350x470 EXCLUSIVE X EXCLUSIVE X, with 5 models (3 of which combined and 2 'heating only'), from 25 to 35 kW of power, is able to best satisfy the multiple installation needs: from new buildings to redevelopment, from single installation to application hybrid in multi-energy system. Thanks to the ACC Combustion system, each model self-adapts to different types of gas, without the need for "dedicated" codes for methane, LPG and propane air(*), or gas conversion kits EXCLUSIVE X , TECHNOLOGY FOR A GREEN LIFESTYLE From the R&D laboratories of Beretta comes EXCLUSIVE X, the new condensing boiler that marks a further step in the evolution of the EXCLUSIVE range, whose name has always characterized the top of the brand's wall-mounted offer. Combustion and electronics, which represent the heart and brain of the boiler, have been entirely redesigned to offer an even more performing and responsive product to the European objectives of environmental sustainability. EXCLUSIVE X is the ideal choice for those who are not satisfied and are looking for green solutions. EX CLUSIVE INNOVATION The new stainless steel exchanger, the innovative electronics with hybrid function integrated in the boiler, without external remote controls, and the ability to process mixtures of natural gas and hydrogen up to 20% give EXCLUSIVE X a highly technological profile, ensuring maximum energy saving, which translates into an economic advantage for the user . EXCLUSIVE PERFORMANCE EXCLUSIVE X represents the spearhead of the Beretta offer. Thanks to the new optimized plate heat exchanger , the range achieves sanitary performance at the top of the category in terms of efficiency, temperature stability and waiting times. The refined ACC electronic combustion system, which allows the quantity of fuel delivered to be continuously modulated, offers “best-in-class” efficiency and functionality in all circumstances, reducing harmful emissions to a minimum. EXCLUSIVE BERETTA The new range represents the synthesis of Beretta's advanced research, in continuity of style with the best tradition of the brand. Continuity that manifests itself both in the aesthetics of the product, which takes up the lines of the first Beretta boiler models, reinterpreting them in a modern key, and in the simplicity of use and installation flexibility, among the distinctive features of the brand, which have always been appreciated by the market A NEW HEART OF STEEL EXCLUSIVE X is equipped with a new primary exchanger in stainless steel , with a smooth tube with a large section, to ensure the best efficiency and cleanliness over time. Stainless steel, in addition to the high resistance to the corrosive action of acid condensate, prevents the internal formation of oxides and other electrochemical phenomena typical in installation on old systems. The geometry with a single wound coil (hydraulic circuit in series) guarantees constant flow in all sections of the exchanger and intrinsically prevents phenomena of clogging. Front access facilitates periodic maintenance and cleaning of the combustion chamber. COMBUSTION WITH ELECTRONIC INJECTION The ACC system, refined by Beretta for the EXCLUSIVE X , allows in all circumstances to offer functionality, efficiency and low emissions that are “first in class”. Using a sensor for detecting the flame ionization current, which allows the electronics to continuously modulate the quantity of fuel injected, the system keeps the air/gas mixture constant at optimal values ​​over the whole modulation range of the delivered power (constant CO2 value). Thanks to the sophisticated ACC system, combustion adjusts itself, thus eliminating the need for any calibration and allowing the boiler to operate with different gas compositions. Particular attention is paid to CO emissions, through a self-diagnosis that intervenes on the burner before the emission threshold allowed by the legislation is exceeded. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS MADE TO ORDER NB The boiler will be supplied with methane. For operation with LPG or propane air, contact the local authorized assistance center in advance. Technical features Model : LUNA STYLE 1.24 Code: A7754009 Heating nominal heat input: 24.7 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: A Seasonal space heating energy efficiency ŋs: 94 % Useful efficiency at 30% thermal power. name and low temperature regime. **ŋ1: 98.8 Useful efficiency (pci) at 30% - return temperature 30°C: 109.7% Useful efficiency (pci) intermediate - average temperature 70°C: 98.4% Dimensions and weight Dimensions (hxwxd): 763x450x334 mm Net weight: 31.5kg Description Backlit color control panel, icons for parameter display, clear descriptions via large text display, adjustment knob and menu selection keys Wide modulation range 1:10 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Power set: heating power adjustment according to project data Hydraulic group in brass Connection to pressurized collective flues Natural gas boilers convertible to LPG and propane air (conversion kit not required) Antifreeze function and IPX5D degree of protection Operation with a mixture composed of up to 20% hydrogen Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX 24 TT CONDENSING ERP COMPLETE WITH FUME EXHAUST KIT Technical features Immergas Victrix 24 TT condensing boiler Capacity: 24Kw Useful heating power kW: 20.5 DHW useful power kW: 23.6 Type: Instant Modulation range: 15 - 100% Hot water production (∆t 30 °C) l/min: 11.3 Electrical protection degree IPX: 5D Dimensions (HxWxD) mm: 748 x 440 x 280 VICTRIX TT The VICTRIX TT ErP range, intended for new installations and above all for the replacement of existing appliances, has been designed to comply with the new European Directives on the use of energy, increasingly oriented towards condensing technology to more easily reach the efficiency classes high in space heating and in the production of domestic hot water in homes. VICTRIX TT ErP, produced in the new highly automated lines of the company's historic headquarters in Brescello, incorporates the innovative condensing module which guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater corrosion resistance thanks to the special alloy with which it is made. Reduced consumption thanks to the class A circulator and boiler power modulation up to 15%: ideal condition for mid-seasons or reduced loads. In addition to a very low environmental impact, the boiler features an advanced and easy-to-use user interface with adjustment knobs, selection buttons and LCD display for viewing operating temperatures, operating status and error codes. HIGH HYDRAULIC PERFORMANCE The condensing module has been designed to have large water passages which allow interesting flow rate and head performance even on old heating systems. This also means a low risk of clogging in the presence of impurities in the system water. It is made of a special Aluminium-Silicon-Magnesium alloy, a material which – together with the high thicknesses used – is particularly resistant to corrosion. The water circuit runs through the exchanger in an ascending manner, in counter-current with respect to the flame. The dense pinning allows you to increase the exchange surface ensuring excellent water yield. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15). CLASS A CIRCULATOR The low-consumption modulating circulator guarantees considerable savings in electricity compared to a traditional circulator, it can be set in Auto or Fixed operating modes. WIDE MODULATION RANGE The electronic card reduces operating costs thanks to particularly high yields even with low energy absorption, as occurs for example in the mid-seasons. In fact, the wide range of modulation of the appliance (from 15% to 100% of the thermal power) determines high seasonal yields. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W) EVOLVED DESIGN The VICTRIX TT ErP range is designed to make the work of professionals easier. Immergas has invested significant resources in the industrialization of the parts of the appliance, making it particularly robust and has paid the utmost attention to details and finishes. VICTRIX TT ErP presents new technical features such as: • safety valve drain conveyed to the condensate drain • removable cover for direct access to the electrical connection compartment • cover casing for the water connections to better position the boiler in domestic spaces DIRECT ACCESSIBILITY TO THE ELECTRICAL CONNECTIONS COMPARTMENT In the lower part of the boiler there is a connection compartment accessible without the need to open the product but simply by removing the aesthetic cover, to house the electrical connections of the main devices that can be combined (for example CARV2, external probe, CRONO 7). ELECTRONIC AIR/GAS CONTROL The electronic gas valve allows air/gas control by means of a multifunction electrode placed inside the combustion chamber; the car electronic card adapts the combustion parameters in the event of variations in the density of the air or of the fuel. This allows VICTRIX TT ErP to be powered with any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example at the first commissioning by the Authorized Assistance Centre). The boiler is therefore supplied with a single product code.

Read more less

Fondital ITACA KC 28 condensing boiler complete with flue gas exhaust kit, dirt separator and standard probe - methane Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 26.4 kW Rated heat output: 27.9 kW Efficiency at maximum power: 96.4% Efficiency at 30% load: 107.0% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 15.5 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion vessel capacity: 10 l Consumption in heating at nominal power Natural gas m3 /h 2.79 DHW consumption at nominal power Natural gas m3 /h 3.22 Total absorbed electrical power: 91 W Degree of protection of the electrical panel: IPX5D Dimensions W x H x D mm 420x750x315; 39kg Natural gas supply Warranty: 2 years ITHACA taca KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler is equipped with the "DHW comfort" function which keeps the plate exchanger warm for a faster response in the event of a request for domestic hot water. Standard magnetic dirt separator filter. Can be managed with the Spot chronothermostat. PLUS Standard room temperature probe Modulation ratio 1:9 Class 6 of NOx emissions Condensation also in DHW operation thanks to the thermally insulated 26-plate DHW exchanger Management of one heating zone with ambient temperature probe, which can be extended to two with zone kits Standard management of 2 types of solar thermal system Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling TECHNICAL FEATURES Heating water electronic flow control Heat exchanger in thermopolymers and stainless steel Total premix burner 10 liter heating expansion vessel Thermoregulation with external probe (optional) Modulating circulator with built-in deaerator DHW comfort function: ★★★ Automatic by-pass Double loading system: automatic and manual Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits. For info, contact the local authorized assistance center in advance NB: PRODUCT AVAILABLE ON ORDER Ferroli Bluehelix TOP RRT K 50 28C Methane or LPG condensing boiler Complete with Smoke Exhaust Kit cod. 0T3T2AWA - NEW Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max / min heat input (Hs) kW 27.2 / 5.6 Heating power max / min heating (80/60°C) kW 24 / 4,9 Max DHW heat input (Hi) kW 28.5 Min DHW heat input (Hi) kW 5.0 Max / min DHW thermal power kW 28.0 / 5.0 NOx emission class (EN 15502-1) - 6 Max working pressure heating bar 3 Sanitary flow rate ∆t 30°C l/10min 161 Protection degree (IEC 60529) IP X5D Supply voltage V/Hz 230V / 50Hz BLUEHELIX TOP RRT K 50 BLUEHELIX TOP RRT K 50... THE EVOLUTION IS COMPLETE This range of generators is equipped with the tested primary heat exchanger in stainless steel and a 50-litre domestic hot water storage tank, also in stainless steel. Designed and built according to the new ErP directives for eco-compatible design and labelling, BLUEHELIX TOP RRT K 50 is at the top of its category. BLUEHELIX TOP RRT K 50 achieves one of the highest energy efficiency of space heating in the boiler category: ηs 94% (Class A ErP, scale from G to A++). Furthermore, when combined with the external probe and the Romeo remote timer control or the new Connect control, it reaches system energy class A+ (scale from G to A+++). TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) The THERMOBALANCE™ heat exchanger of BLUEHELIX TOP RRT K 50 (fig. A) compared to the more classic and widespread steel exchanger (fig. B), abandoned in favor of the evolution towards the primary steel exchanger used in the models Bluehelix (2012 -> ). This geometry allows the heat exchanger of the THERMOBALANCE heating unit to operate almost at maximum design efficiency even in conditions of partial blockage, while with the same amount of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig . B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency beyond below the nominal values. INNOVATIVE THERMAL GROUP FERROLI THERMOBALANCE TM IN ITS 5 ELEMENTS Ferroli has oriented the design of the combustion cell and the exchanger of BLUEHELIX TOP RRT K 50 in order to maximize the functional advantages and the constructive sturdiness, as well as the simplicity of maintenance: the single-circuit design means that any air bubbles in the system do not remain trapped in the exchanger, and facilitates cleaning with chemical washing as much as possible, unlike spiral exchangers with double parallel circuit (more common) in which if only one of the circuits is blocked, chemical washing is much more laborious. THE ENGINE The tube that makes up the BLUEHELIX TOP RRT K 50 exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to encrusting agents and deposits. TOP QUIETNESS The particularly careful design of BLUEHELIX TOP RRT K 50 has made it possible to achieve significant values ​​in terms of silence and acoustic comfort, so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. . Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers. The planning also took care of the design, creating a precious mantle in 3 removable pieces, which descends to cover the pipe connections. THE BOILER CONTROL The control and management electronics allow the user to customize the operation of the appliance in order to manage the environmental comfort according to one's needs. The key control panel and the simple LCD display make the programming operations for the production of hot water, both for domestic hot water and for heating, extremely easy and intuitive. Thanks to the remote connection via bus, this can also be done directly from the remote control. The card is protected by an easily accessible fuse thanks to the dedicated flap and the electrical connections benefit from a robust and large box, with easily accessible connectors and numerous cable ties. The boiler is also set up to connect a second room thermostat to the dedicated terminals to manage multi-zone mixing systems. MC2 The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2: Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). EASY MAINTENANCE At the time of the first maintenance, the technician can appreciate the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the "Thermobalance"TM thermal group allows maintenance to be carried out with maximum precision and speed. Some examples: Internal accessibility is favored by the 3-piece mantle with removable side panels. The electrical box of the electronic board can be easily rotated on the chassis leaving free access to the internal parts. The fan, offset from the burner and placed underneath, must not be disassembled to access the steel burner-exchanger unit. The burner door is totally self-air-cooled and therefore does not require an insulating panel, avoiding the risk that this could be damaged or broken during disassembly for cleaning. The burner can be disassembled by loosening just 3 bolts leaving free access to the stainless steel exchanger. The exchanger with extra-large passages is designed to challenge the hardest waters and is easy to clean thanks to the non-collectorised single-pipe circuit. The domestic hot water inlet filter can be extracted very easily directly from the inside without having to remove the boiler hydraulic connections SIMPLIFIED REPLACEMENT The new boiler can also be installed with 50mm diameter ducting outlets. Particularly important in the replacement market in the frequent case of collective flues that require "heavy" ducting where it is necessary to have a high fume expulsion capacity even with reduced diameters. STOP AND GO FUNCTION With the use of sanitary taps with mixing, short or very short dispensing for quick rinses involves the start of the boiler ignition procedure which usually ends immediately. The continuation of these "false starts" can, in the long run, compromise the average life of the product. For this reason BLUEHELIX TOP RRT K 50 provides an electronic parameter through which it is possible to delay burner ignition (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water SUN EASY FUNCTION BLUEHELIX TOP RRT K 50 has been designed to be easily inserted into systems built with the latest technologies. The SUN EASY system makes use of electronics that simplify the combination with solar panels with both natural and forced circulation. Through a sensor placed on the DHW circuit, it continuously monitors the temperature of the water preheated by the solar panels, foreseeing the ignition of the burner only if the latter falls below the level necessary to guarantee optimal comfort for the user SANITARY ECO-COMFORT FUNCTION In ECO operation, the production of domestic hot water takes place according to traditional standards, allowing for energy savings during periods of non-use. In COMFORT mode, thanks to the particular heat exchanger temperature maintenance system, the delivery of domestic hot water becomes even faster and more comfortable. Achieving maximum comfort certified 3 stars (EN 13203). The efficiency and the load profiles according to the ErP directive are at the top of the category: mod. 28 / A - XL | mod. 34/A - XXL MODULATION RANGE The new control electronics allow to reach high modulation fields which can reach up to 1:12 for the 34 K 50 model (1:10 for the 28 K 50). In this way BLUEHELIX TOP RRT K 50 is able to adapt to the effective power required by the system with extreme ease and efficiency, avoiding annoying on/off type operations which increase operating costs and reduce the average life of the product. PRODUCT ADVANTAGES Boiler with thick stainless steel primary exchanger, with increased passages (at the top of the category) to guarantee durability and reduced maintenance, it maintains high efficiency even on old systems with oxidation and dirt A+ : combined with the modulating remote control and the external probe (optional) it reaches the higher efficiency class A+ (scale from G to A+++) Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:12 (mod. 34, 1:10 mod. 28) MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use to varying conditions of the gas network (e.g. fluctuations or reduced pressures) > MGR: Natural gas, LPG, Propane air Ready through a simple configuration the boiler is able to operate on natural gas, LPG and propane air without the use of additional conversion kits Exclusive exchanger-burner system with self-cooled door: simplifies maintenance and reduces its cost thanks to fewer parts to replace. Domestic hot water production with 50 liter stainless steel storage tank Arrangement for recirculation connections (present in the accessory: connection connection kit) Hydraulic connections covered by the boiler shell > Standard by-pass Particularly suitable for operation in flues that require "heavy" ducting thanks to the approval for operation with 50mm diameter flue pipes FPS: Smoke Protection System. The flue clapet valve inserted as standard on the boiler allows easy connection to pressurized collective flue systems (e.g. in renovations), in accordance with the UNI 7129 standard Designed to simplify and facilitate normal maintenance and cleaning operations Anti-legionella function with programmable timing Timed anti-blocking for circulator and three-way valve 3-star certified comfort in sanitary manufacturing according to EN 13203 Minimum polluting emissions (class 6 according to EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of malfunction due to lack of flame detection (methane model) Free methane/LPG/propaneted air transformation during the initial product check and activation of the conventional guarantee, to be requested from the Authorized Assistance Center Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

RINNAI condensing boiler ZEN 24 kW Low NOx Integrated Wi-Fi Integrated Condensate Neutralizer cod. REB-KBI2424FF-NG Methane Complete with Fume Kit Code REB-KBI2424FF-NG Heating energy efficiency class A Profile / Domestic hot water energy class L / A Noise level indoors (dB) 40 Performance Nominal heat input on PCI Heating (kW) 24.0 Qnw Nominal heat input on Sanitary PCI (kW) 24.0 NOx class 6 Maximum electric power absorbed in heating (W) 83 Degree of protection IPX5D Expansion vessel content (l) 7.5 Domestic hot water delivery (∆T=35°C) (l/min) 9.6 Dimensions Dimensions (W x H x D) (mm) - Empty weight (kg) 440x660x285 - 33 ZEN Zen is the new 100% Rinnai domestic condensing boiler , with WiFi chronothermostat as standard. Thanks to the "My Rinnai" APP, using and monitoring the generator is very simple: just one click to set the temperature, check consumption and change the programming for unexpected changes in plans, such as a last-minute evening with friends. Performing on any type of system, range rated and full condensing, Zen is the perfect Rinnai solution for domestic comfort. Small in size and big in performance, Zen is easy to install and guarantees a low environmental impact. The heart of the boiler has extraordinary performances The metal fiber burner is ultra low NOx, with values ​​that satisfy the most restrictive European regulations: Zen reaches the best class of merit (Class 6) for its low environmental impact and is positioned as the most eco-sustainable product in its category. The 100% Rinnai heat exchanger is made of stainless steel, completely recyclable, designed to ensure complete condensation and last over time. Innovative earthquake safety sensor In the event of medium or high intensity seismic events (increasingly frequent also in our country) the boiler automatically isolates itself from the gas system, limiting the risk of leaks, explosions or fires, which can make the affected environment even more dangerous. earthquake. Can also be installed outdoors Zen is IPX5D certified and features the standard antifreeze kit up to -20°C. Thanks to these characteristics, it can also be installed outdoors without the need for additional protection. Integrated condensate neutraliser The Zen series features the condensate siphon integrated inside the generator, already added with granulate and immediately ready for use. This allows you to simplify installation, always, even when replacing a traditional high temperature generator. The integrated neutraliser, in fact, allows the acidity of the condensate to be eliminated (water with an acid pH produced by the normal operation of the boiler, corrosive for the pipes) without having to face the costs of purchasing and maintaining an external accessory which performs this function. otherwise essential. Integrated climatic probe The integrated climatic probe is a standard of Rinnai heat generators: the internal positioning allows you, who use it and you who install it, to avoid masonry work and electrical connections. Thanks to this sensor, you can forget about regulating the temperature in your home and let the generator take care of everything, intelligently adapting its operation according to the weather, more or less cold. So while the boiler operates in climatic regulation with sliding temperature, you can enjoy a perfect balance between comfort and savings, and no worries. Wi-Fi as standard Zen offers the standard Wi-Fi chronothermostat (which can also be installed in a room other than that of the generator) to manage and control the boiler anytime, anywhere, in complete freedom. Consumption reports, weekly programming, modification of settings and management of multiple boilers (such as one's own and that of elderly parents, or the house in the mountains) from the same "My Rinnai" APP, available for Android and iOS smartphones. All this and much more to offer you totally smart management. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

UNICAL KON M C28 kW CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Model: KONm 24C Energy efficiency: Seasonal efficiency class for heating A Declared load profile: XL Sanitary seasonal efficiency class: A Technical data: Nominal useful power in condensing 28.9 Seasonal heating energy efficiency ambient ηs 93% Useful thermal power in high temperature regime. (Tr 60 °C / tm 80 °C) 15.8 kW Efficiency at nominal thermal power in high temperature regime (Tr 60 °C / Tm 80 °C) : 88.4% Useful power at 30% of nominal thermal power in low temperature regime (Tr 30 °C): 5.3 kW Domestic hot water specific flow rate (Dt 30 °C) ''D'' 13.0 DHW production in cont. Dt 25 K (mixed) -/15.5 IP X5D degree of protection NOx class: 6 Dimensions (HxWxD): 700x420x345mm; 36.5kg KONm KONm the latest generation of domestic condensing boilers by Unical, available in the version: combined instantaneous heating only that can be combined with the DSP 110 stainless steel boiler. KONm presents all the "Quality Stars" to satisfy every need: Exceptional modulation ratio up to 1:8 Efficiency >107% (ex dir. CE 92/42) Primary exchanger in ultra-flat Al/Si/Mg Electronics with HWS “Hot Water Speed” function (vers. C) Low NOx (class 5 according to EN 297 and EN 483) thanks to the modulating premix burner Production of hot water up to 13.3 l/min Δt 25 with special 12-plate (mod. 24 C) and 16-plate (mod. 28/35 C) stainless steel exchanger “Pit stop” maintenance Simple and intuitive control panel Prepared for future applications in systems and suitable for meeting the requirements of the new installation standards High efficiency modulating circulator Managing 2 zones with 2 KON m thermostats is versatile. Ideal for all systems, thanks to the electronics that allow you to manage 2 heating zones at different temperatures (high for radiators and fan-coils, low for radiant panel systems) by controlling them with dedicated modulating and on-off thermostats Anti-overheating post-circulation of 15 seconds, it maintains the thermal equilibrium between delivery and return, even after intense DHW withdrawals, while in heating, with a duration of 5 minutes, it allows all residual thermal inertia to be disposed of. Sliding temperature operation for maximum running economy Antifreeze protection intervenes at 5°C and is activated in both DHW and heating, bringing the temperature in the boiler to 15°C. The risk of KON m freezing if low temperatures persist in the room where it is installed is avoided. If there is a lack of gas, the lockout signal will appear on the display. Pump anti-blocking prevents blocking of the pump following long stops thanks to an automatic 5-second impulse that the electronics sends to the motor every 24 hours of stop. Chimney sweep function adjustment of combustion easier than ever. Pressing the release button for more than 5 seconds to obtain operation at minimum or maximum power for 15 minutes, for an accurate analysis of the combustion. Strengthened by the company's constructive synergies, KONm summarizes some aspects of the high-end series such as the primary heat exchanger in Al/Si/Mg with low water content by "Scuola Unical", the original rapid inspection mechanism of the vital parts of the combustion together with the extensively tested but updated complex of electronics and electro-pneumatic control pre-mixing system already in use on other ranges. A sober answer with high technological content "ErP Ready", ideal for the consumer who approaches technologies with high energy recovery and for the installer who requires simple but not trivial solutions in plant replacement or in new buildings with low environmental impact . KONm is signed by Unical. Exclusive exchanger in Al/Si/Mg It is made of a special Aluminium/Silicon/Magnesium alloy which ensures efficiency and resistance, so much so that it is guaranteed by Unical for 5 years. Thanks to the internal heat exchange configuration, efficiencies of over 107% are achieved in condensing mode, which means great economic savings and very low environmental impact for the user. The 28-35 versions are adequately oversized Modulating circulator with deaerator It represents the state of the art in the high efficiency standard. In line with the 2015 ErP directive, with less than 1 W consumption in stand-by and only 45 W in maximum operation, thanks to the wide modulation capacity, based on the request of the room thermostat and the temperatures detected by the sensors placed in delivery/return, it automatically doses the power of the boiler to the needs of the system. Particularly silent and compact, it integrates with the safety valve, the by-pass and the drain cock. “Quick release” condensate drain manifold Fan and electro-pneumatic gas valve The pre-mixing unit made up of a pneumatic gas solenoid valve and modulating fan stands out for its limited overall dimensions. Advantages: compactness and silence wide 1:8 modulation range absolute operating safety due to the absence of turbulence low thermal and mechanical stresses, therefore long life, thanks to the inalterability. The valve is designed to compensate for gas pressure fl uctuations present in networks as well as stabilize the supply pressure independently of the suction pressure generated by the premix fan. The 28/35 version is equipped with a silenced air intake to improve acoustic performance and also with a larger air intake manifold. Easily adjustable, it ensures an accurate air/gas combustion mixture to guarantee high CO2 levels and favor condensation with very low CO and NOx levels. In summary, the monoblock lends itself to easy maintenance and accessibility Exchanger cleaning 1 minute and 46 seconds! KONm is the result of the experience of the Service and market suggestions, from which the Unical design staff has synthesized a technological complex that can be easily assembled and quickly disassembled. Intuitive controls The on-board electronic panel will feel immediately familiar. Last but not least: all wiring and intervention operations are facilitated by the vertical tilting system. The multifunction LCD display, with timed backlighting, allows: Reading of the temperatures in heating and DHW Display of blockage due to lack of fl ame Operating/stand-by status Diagnostics with signaling of 11 anomalies Knob: stand-by, mode selector and heating adjustment 30 - 85°C DHW adjustment knob 38 - 60°C Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less