CHAFFOTEAUX MIRA ADVANCE 25 kW GAS BOILER LINK Wi-Fi INCLUDING METHANE WITH FUME EXHAUST KIT Product code: 3310612 Energy label specifications according to the European ErP directive Heating energy efficiency Class A+ Sanitary energy efficiency Class A Withdrawal profile: XL Energy performance Nominal heat input in heating max/min (Hi) Qn: 22/2.5 kW Nominal DHW heat input max/min (Hi) Qn: 26/2.5 kW Heating output max/min (80°C-60°C) Pn: 21.5/2.3 kW Heating output max/min (50°C-30°C) Pn: 23.6/2,6 kW DHW max/min useful power Pn: 24.9/2.4 kW Efficiency at nominal heat input (60/80°C) Hi/Hs: 97.7/87.9% Efficiency at 30% of Qn with return to 30°C Hi/H: 109.8/98.9% Performance stars (dir. 92/42/EEC): **** Working burner chimney losses: 2.6% Emissions Evacuation residual head: 100 Pa NOx class. 6 Smoke temperature (G20) (80°C-60°C): 70 °C Maximum flue gas flow rate (G20) (80°C-60°C): 44.9 kg/h Excess air (80°C-60°C): 34% Heating/DHW circuit Expansion vessel capacity 8 l Maximum heating pressure: 3 bar Min/max heating temperature (high temperature range): 35 / 82 °C Min/max heating temperature (low temperature range): 20 / 45 °C Min/max domestic hot water temperature: 36 / 60 °C Specific flow rate in sanitary mode (10 min. with ∆T=30°C): 14.3 l/min Instantaneous quantity of hot water ∆T=25°C - ∆T=35°C: 19.8 - 12.3 l/min Sanitary comfort stars (EN13203): *** Minimum withdrawal of hot water: 2 l/min Electrical data Supply voltage/frequency: V/Hz 230/50 Total absorbed electric power: 80 W Energy efficiency index of the circulator: EEI ≤ 0.23 IP X5D degree of protection Dimensions HxWxD: 745 x 400 x 315mm Weight: 29.7Kg Diet Methane gas MIRA ADVANCE LINK Mira Advance Link, powerful core for amazing control. Equipped with the innovative SpinTech exchanger, it excels in its category thanks to the electronic combustion control, integrated Chaffolink connectivity, Expert Control and standard external probe. Can be installed in partially protected places Maximum Performance: New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. Maximum Comfort Modulation ratio 1:10. Electronic combustion control E-Burning System. SRA function. Gas transformation from the technical menu without the need for a kit. Chaffolink connectivity integrated in the boiler. External temperature from the internet thanks to integrated connectivity. Ease of Installation Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. Energy saving and respect for the environment Up to 25% energy savings in combination with Expert Control and the SRA function. Up to 35% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Beretta MYNUTE X 35C Low NOx condensing boiler complete with flue gas kit 20163566 Methane - NEW Boiler code 20163566 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL NOx emission class 6 HEATING EXERCISE Heating thermal capacity (max-min) kW 30.00-4.90 Maximum pressure-temperature bar-°C 3 - 90 Expansion tank capacity l 9 HEALTHCARE EXERCISE Nominal DHW heat input (max-min) kW 34.60-4.90 DHW energy efficiency ηwh % 85 DHW production at ∆T= 25°C / 30°C / 35°C l/min 19.8/16.5/14.2 CONNECTIONS Heating inlet - outlet Ø 3/4” DHW inlet - outlet Ø 1/2” Gas inlet Ø 3/4” DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 37 kgs MYNUTE X BERETTA PRESENTS MYNUTE X, THE NEW RANGE OF CONDENSING BOILERS, WITH MANY INNOVATIVE AND ADVANTAGEOUS FEATURES From the primary exchanger in stainless steel to the modern electronic interface, there are numerous new elements that distinguish MYNUTE X in the Beretta offer. The new condensing range, with its 5 models from 20 to 35 kW, with "combined" and "heating only" versions, meets every need for residential comfort. High efficiency, low consumption and ease of installation make MYNUTE X the winning choice, both for new homes and for the replacement market. With MYNUTE X, the novelty of the project merges with Beretta's tradition of excellence, matured in almost half a century of experience in the home comfort sector. Its aesthetics, in line with the Beretta style of the latest generation products, easily integrates into any living context, thanks also to its compactness and installation flexibility. NEW DIGITAL INTERFACE MYNUTE X is equipped with a modern and user-friendly control panel, elegantly covered by a door that lets you glimpse the light of its "green gem", the LED light bar that signals its current operating status. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the functions of MYNUTE X. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE X FEATURES MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS, HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC PREHEATING ACCESSORIES PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES CLOCK FUNCTION WEEKLY PROGRAMMING INTEGRATED IN THE DISPLAY POSSIBILITY OF CONNECTION WITH DOMESTIC HOT WATER TANK (R MODELS) Technology and benefits NEW PRIMARY EXCHANGER IN STAINLESS STEEL THE NEW MYNUTE X EXCHANGER IS MADE OF STAINLESS STEEL, WITH A HIGH SECTION SMOOTH PIPE TO OFFER THE BEST EFFICIENCY AND CLEANLINESS OVER TIME. In addition to the high resistance to the corrosive action of acid condensate, AISI 304 L stainless steel reduces the internal formation of oxides and other electrochemical phenomena typical of installation on old systems. The single wound coil geometry (hydraulic circuit in series) offers a constant flow rate in all sections of the exchanger and intrinsically limits clogging phenomena. Front access facilitates periodic maintenance and cleaning of the combustion chamber. INTEGRATED CLAP MYNUTE X is C10 * approved (formerly 3CEp approved), integrating the non-return valve (clapet) as standard on all models, which makes it "ready to install" in case of installations in pressurized collective flues, for which the non-return valve is a mandatory device. The non-return valve is a specific device which allows the combustion fumes to flow through the ducts in only one direction, i.e. from the burner to the flue gas outlet. Its function is therefore to prevent the fumes from returning to the combustion chamber, compromising the correct functioning of the boiler. This could happen for various reasons, for example in the event of overpressure in the duct of a collective flue system. The non-return valve is generally supplied as a specific optional kit, to be installed at the flue outlet of a boiler in the case of C10 type collective exhausts. In MYNUTE X the non-return valve is positioned inside the boiler (see detail), which translates into quick installation and cost reduction. HYBRID READY MYNUTE X is a HYBRID READY solution. The boiler was born within the offer of HYBRID READY products, which make up the new hybrid technology system conceived and developed in the Beretta Research Laboratories. This system, created to meet the current and future integration and management needs of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. Characteristics INNOVATIVE STAINLESS STEEL CONDENSING EXCHANGER WITH FRONT ACCESS WIDE MODULATION RANGE (UP TO 1:8) LOW CONSUMPTION MODULATING CIRCULATOR (EEI ≤ 0.20), 6 m EQUIPPED WITH STANDARD FUME CLAP (CHECK VALVE) AND C(10) APPROVED.* LOW POLLUTANT EMISSIONS: CLASS 6 (UNI EN 15502) MYNUTE X IS HYBRID READY: IT WAS BORN TO BE INTEGRATED IN BERETTA MULTI-ENERGY SYSTEMS THROUGH THE HYBRID REC 10H AND THE HYBRID CONNECTS, AVAILABLE AS ACCESSORIES INSTALLATION FLEXIBILITY: INDOOR, OUTDOOR** AND RECESSED*** INSTALLATION (IN A PARTIALLY PROTECTED PLACE) CLICK-FIT FLUE CONNECTION: FAST AND SAFE, WITHOUT THE NEED OF AN EXTERNAL COLLAR ANTIFREEZE RESISTANCE KIT, HYDRAULIC CONNECTIONS AND EXTERNAL PROBE AVAILABLE AS ACCESSORIES ELECTRICAL PROTECTION DEGREE IPX5D SUPPLIED "DOUBLE T" TEMPLATE COMPATIBLE WITH HYBRID CONNECTORS FOR THE MANAGEMENT OF UP TO TWO SYSTEM ZONES FOR GAS CONVERTING, PLEASE CONTACT AUTHORIZED BERETTA TECHNICAL ASSISTANCE CENTERS COMPATIBLE WITH BeSMART WIFI COMFORT CONTROL AS THERMOSTAT (OTBUS COMMUNICATION), ALLOWING THE MOST ADVANCED FUNCTIONS POSSIBILITY OF INTUBATING FLUES WITH THE SPECIFIC FLUE IN PP Ø60 AND Ø50 Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER CAN OPERATE WITH METHANE. LPG AND PROPANE AIR WITHOUT THE USE OF ADDITIONAL CONVERSION KITS. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ferroli Bluehelix Maxima 34C condensing boiler complete with Wi-Fi flue gas exhaust kit Optional Class A Methane or LPG low NOx - NEW 0TSB7MWA Energy label specifications according to the European ErP directive Heating energy efficiency Class A+ (in combination with the connect command) Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Max heating heat input (Hs) kW 30.6 Max DHW heat input (Hi) kW 34.7 Efficiency 30% % 109.5 NOx emission class (EN 15502-1) - 6 Heating expansion vessel capacity 10 litres Sanitary flow rate ∆t 25°C l/min 19.5 IP X4D protection degree Supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x320 Methane or LPG MGR: Methane, LPG, Propane air Ready. The boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits Bluehelix Maxima - Functionality at its maximum expression The exclusive lines of BLUEHELIX MAXIMA radically innovate the aesthetic concept proposed so far through the use of crystal and the revolutionary use of curved shapes. A multicolored LED environment , set in a central position, allows you to perceive the status and operating modes of the boiler, even on a chromatic level. The large 7'' full color touch screen display integrated in the front surface of black tempered glass allows the user to interact in a totally smart way with the product thanks also to the combination with the smart CONNECT remote control manageable from iOS and Android apps . Conceived to fully satisfy the requests for a "robust" product from every point of view: primary heat exchanger with high passages, secondary domestic heat exchanger enhanced with 20 plates, high head circulator, new control electronics. All these elements are designed to ensure maximum efficiency and reliability over time also, and not only, to replace old generators in particularly dirty systems: ideal for "carefree" replacement MAXIMUM SILENCE: ONLY 45 dB The particularly careful design of BLUEHELIX MAXIMA has made it possible to achieve significant values ​​in terms of silence and acoustic comfort , so much so that it could almost be difficult to distinguish the background noise of a home from the noise produced by the boiler during normal operation. Even the boiler on/off transients have been optimized as a function of acoustic comfort, so that the customer will no longer have the hassle of understanding whether the boiler is on or off from its noise as with older generations of boilers MAXIMUM INNOVATION Developing sustainable and low environmental impact solutions capable of combating global warming is now a reality! BLUEHELIX MAXIMA is already capable of autonomously self-regulating (plug-in) and functioning correctly in total safety with mixtures of natural gas enriched with hydrogen already foreseen for distribution in Europe (*) THE BOILER CONTROL The innovative control and management electronics of BLUEHELIX MAXIMA is at the top levels of the category. The large 7'' full touch screen color graphic display allows real-time viewing of operating information thanks to simple and intuitive graphic screens. With a simple touch it is possible to set the temperature set points for heating and domestic hot water. Thanks to the contextual help, BLUEHELIX MAXIMA directly informs the user of the possible causes of the anomaly while providing the qualified technician with indications on possible solutions to undertake. Even the system pressure is no longer a problem because thanks to the semi-automatic system electroloading function, a simple ''touch'' is enough and the boiler automatically restores the adequate pressure without requiring manual intervention by the user. CONNECT The remote control Remote control supplied with the class A+ kit code for home comfort management also from Smartphone (*) Connection to the home WiFi network for internet access via the supplied RF/WiFi receiver CONNECT APP available for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android) Maximization of room comfort with modulating regulation of the flow temperature using the functions Environmental Climatic Compensation (CCA) and Compensation External Climatic (CCE) via external temperature detectable directly from the internet (or from an optional external probe) It improves the average seasonal efficiency in space heating by +4%. Weekly time programming in 30-minute intervals via APP CONNECT Alarm display also via APP CONNECT Operating modes: Off, Holiday, Automatic, Manual Three modifiable temperature levels: Comfort, Economy, Antifreeze TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) The geometry of the BLUEHELIX MAXIMA THERMOBALANCE™ thermal unit exchanger (figure A) allows operation at almost maximum design efficiency even in conditions of partial clogging, while with the same amount of deposits and sediments (e.g. due to the installation action on old systems) the traditional exchanger in figure B tends to block up much faster in the part in contact with the flame due to the reduced passage area of ​​the fluid, in which a real barrier of deposits* is formed which hinder the heat exchange and reduce the efficiency below the nominal values. THE ENHANCED HYDRAULIC UNIT All models in the BLUEHELIX MAXIMA series are equipped with a 20-plate DHW plate heat exchanger and a 7.5 mWC head boosted heating circulator The considerable increase in the passage section of the 20-plate exchanger compared to a traditional one (e.g. with 14 plates) greatly reduces clogging over time, even in the presence of particularly hard water, greatly increasing its average life and reducing maintenance costs to a minimum. The enhanced system circulation pump with a head of 7.5 meters allows all BLUEHELIX MAXIMA models to function correctly, delivering all the necessary power even in systems with high pressure drops (particularly large new systems or old systems with ). MC2 : MULTI COMBUSTION CONTROL The electronics control the flame ionization current in order to ensure optimal combustion as the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air-gas ratio itself and therefore the combustion. MC2: Multi Combustion Control, the new combustion system with patented gas-adaptive technology improves the adaptability of use as the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Furthermore, the new control electronics allow to reach high modulation fields which can reach up to 1:12 for the 34C model. In this way BLUEHELIX MAXIMA is able to adapt to the effective power required by the system with extreme ease and efficiency, avoiding annoying on/off operations which increase operating costs and reduce the average life of the product. CHARACTERISTICS Aesthetics with exclusive lines (Patent) that radically innovate the design concept through the use of tempered glass and curved shapes Wide range of optional accessories: CONNECT wi-fi remote control kit manageable via App, hydraulic connection kits (5 pipes, 4 taps), connection cover Boiler with thick stainless steel primary exchanger, with increased passages to guarantee durability and reduced maintenance Enhanced modulating heating circulator with high head on all models able to adapt even to particularly resistant systems Semi-automatic system electroloading as standard Enhanced domestic hot water exchanger with a high number of plates particularly immune to blockages and capable of maintaining the domestic hot water production capacity constant over time thanks to the combination with the CONNECT modulating remote control and the reading of the external temperature directly from the internet, it reaches the maximum energy efficiency A+ (scale from G to A+++) Easily adapts to load conditions thanks to the wide modulation range which can reach up to 1:12 (mod. 34C, 1:10 mod. 28C) MC2 : Multi Combustion Control, new combustion system with patented gas-adaptive technology for better adaptability of use to varying gas network conditions 7 inch color graphic touch screen display Immediate display of the operating status thanks to the front multicolor LED Particularly suitable for operation in flues that require "heavy" ducting, thanks to operation with 50 mm diameter smoke outlets Designed to simplify and facilitate normal maintenance and cleaning operations thanks to easy access to internal components Simplified electrical wiring that does not require removal of the boiler shell thanks to direct access to the external connection terminal block available on the bottom of the product Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Fondital Formentera KC 32 condensing boiler complete with METHANE Low NOx fume exhaust kit Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 30.4 kW Nominal heat output: 32.3 kW Efficiency at maximum power: 96.8% Efficiency at 30% load: 106.2% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 16.2 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion vessel capacity: 10 l DHW consumption at nominal power Natural gas m3 /h 3.22 Total absorbed electric power: 99 W Degree of protection of the electrical panel: IPX5D Dimensions (hxlxp) 750x420x315 mm; 40.5kg METHANE power supply Warranty: 2 years FORMENTERA Formentera KC is a pre-mixing wall-mounted condensing boiler with instantaneous production of sealed chamber domestic hot water. The boiler, unlike the storage ones, allows instantaneous production of domestic hot water and uses condensing technology which allows a reduction in consumption, high efficiency and low emissions of pollutants. PLUS Modulation ratio 1:9 Touch screen user interface Standard management of 2 types of solar thermal system Boiler room temperature adjustment with external probe Sanitary heat exchanger with 26 plates TECHNICAL FEATURES Heat exchanger in thermopolymers and stainless steel Total premix burner Modulating gas valve with constant air/gas ratio Variable speed combustion fan 3-speed circulator with built-in deaerator 10 liter heating expansion tank Motorized diverter valve Installation flexibility thanks to the IPX5D electrical protection degree Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling Availability of the boiler change kit as an accessory Efficiency classification according to 92/42/EEC: ★★★★ NOx emission class (EN 297): 5 Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS MADE TO ORDER NB The boiler will be supplied with methane. For operation with LPG or propane air, contact the local authorized assistance center in advance. Technical features Model : LUNA STYLE 1.35 Code: A7754008 Heating nominal heat input: 33 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: A Seasonal space heating energy efficiency ŋs: 94 % Useful efficiency at 30% thermal power. name and low temperature regime. **ŋ1: 98.9 Useful efficiency (pci) at 30% - return temperature 30°C: 109.8% Useful efficiency (pci) intermediate - average temperature 70°C: 98.4% Dimensions and weight Dimensions (hxwxd): 763x450x334 mm Net weight: 32kg Description Backlit color control panel, icons for parameter display, clear descriptions via large text display, adjustment knob and menu selection keys Wide modulation range 1:10 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Power set: heating power adjustment according to project data Hydraulic group in brass Connection to pressurized collective flues Natural gas boilers convertible to LPG and propane air (conversion kit not required) Antifreeze function and IPX5D degree of protection Operation with a mixture composed of up to 20% hydrogen Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX EXA 28 KW CONDENSING ERP COMPLETE WITH FUME EXHAUST KIT Technical features Immergas Victrix Exa 28 kW boiler Capacity: 28Kw Useful heating power kW: 28, DHW useful power kW: 32.0 Type: Instant Modulation range: 25 - 100% Hot water production (∆t 30 °C) l/min: 15.3 Electrical protection degree IPX: 5D Dimensions (HxWxD) mm: 763 x 440 x 300 ; 42kg VICTRIX EXA With VICTRIX EXA comes a generation of condensing boilers that offers all the advantages of condensation in maximum simplicity and economy. Designed to comply with the new European Directives ErP and ELD, it makes it easier to reach the high efficiency classes in space heating and in the production of domestic hot water in homes. The condensing module is in stainless steel and the circulator is low consumption. The modulation range of the appliance goes from 23 to 100% of the thermal power. The user interface is simple to use, it is equipped with adjustment knobs, selection buttons and an LCD display which shows the operating status and any error codes. VICTRIX EXA can also be managed from smartphones, tablets and laptops (the DOMINUS App will be available from January 2016). The casing covering the water connections is standard, to better set up the boiler inside domestic spaces. Approved to operate indoors or outdoors in a partially protected place thanks to the IPX5D degree of electrical protection, the boiler is equipped with standard frost protection down to -5 °C. VICTRIX EXA can also be used in GAUDIUM SOLAR BASE ErP systems. With low emissions of carbon monoxide (CO) and nitrogen oxides (NOX), VICTRIX EXA falls into class 5, the most ecological envisaged by European standards (UNI 297 and 483). The VICTRIX EXA range offers all the advantages of condensation in maximum simplicity and economy. The most compatible technology with the new European Directives and with the aim of reducing energy consumption, is presented in the most economical and effective way for many new installations and replacements of existing appliances. The VICTRIX EXA are two instantaneous boilers of 24 and 28 kW, capable of making a consistent contribution to raising the energy efficiency class in space heating and in the production of domestic hot water. Wall installation is easy both indoors and outdoors and the VICTRIX EXA range also offers the possibility of operating with propane air by choosing the dedicated conversion kit. The condensing module is in stainless steel and the circulator is low consumption, all made more comfortable and easy to install thanks to the compact dimensions. The user interface is simple to use, it features adjustment knobs, selection buttons and an LCD display which shows the operating status and any error codes. The lower casing to cover the connection pipes is standard, while the connection group is optional for all models SIMPLICITY OF CONTROLS The boiler also features an advanced and easy-to-use user interface with LCD display, selection buttons and adjustment knobs. The latter allow you to make temperature adjustments quickly and easily. ECOLOGICAL BOILER VICTRIX EXA has low emissions of carbon monoxide (CO) and nitrogen oxides (NOx) such as to be included in class 5, the most ecological in the classification established by the European standards UNI EN 297 and UNI EN 483. They can therefore discharge through the wall in the cases provided for by Legislative Decree 102 of 4 July 2014. CLASS A CIRCULATOR The low-consumption circulator allows considerable savings in electricity compared to a traditional circulator and adjusts its consumption according to the variations in the hydraulic flow rate of the system, for example in the presence of thermostatic valves or zone valves. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W)   IMMERGAS IS READY TO DO ITS PART FOR THE ENVIRONMENT! It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/EC) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for instruments that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase and provides only for the supply of spare parts.

Read more less

IMMERGAS VICTRIX 28 TT METHANE CONDENSING GAS BOILER Immergas Victrix 28 TT condensing boiler Capacity: 28Kw Useful heating power kW: 24.0 DHW useful power kW: 28.0 Type: snapshot Modulation range: 11 - 100 % Hot water production (∆t 30 °C) l/min: 13.4 Electrical protection degree IPX: 5D Power supply: LPG *For conversion to LPG, contact the Authorized Assistance Centre VICTRIX TT The VICTRIX TT ErP range, intended for new installations and above all for the replacement of existing appliances, has been designed to comply with the new European Directives on the use of energy, increasingly oriented towards condensing technology to more easily reach the efficiency classes high in space heating and in the production of domestic hot water in homes. VICTRIX TT ErP, produced in the new highly automated lines of the company's historic headquarters in Brescello, incorporates the innovative condensing module which guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater corrosion resistance thanks to the special alloy with which it is made. Reduced consumption thanks to the class A circulator and boiler power modulation up to 15%: ideal condition for mid-seasons or reduced loads. In addition to a very low environmental impact, the boiler features an advanced and easy-to-use user interface with adjustment knobs, selection buttons and LCD display for viewing operating temperatures, operating status and error codes. HIGH HYDRAULIC PERFORMANCE The condensing module has been designed to have large water passages which allow interesting flow rate and head performance even on old heating systems. This also means a low risk of clogging in the presence of impurities in the system water. It is made of a special Aluminium-Silicon-Magnesium alloy, a material which – together with the high thicknesses used – is particularly resistant to corrosion. The water circuit runs through the exchanger in an ascending manner, in counter-current with respect to the flame. The dense pinning allows you to increase the exchange surface ensuring excellent water yield. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15). CLASS A CIRCULATOR The low-consumption modulating circulator guarantees considerable savings in electricity compared to a traditional circulator, it can be set in Auto or Fixed operating modes. WIDE MODULATION RANGE The electronic card reduces operating costs thanks to particularly high yields even with low energy absorption, as occurs for example in the mid-seasons. In fact, the wide range of modulation of the appliance (from 15% to 100% of the thermal power) determines high seasonal yields. LOW ELECTRICITY CONSUMPTION IN STAND-BY (LESS THAN 6 W) EVOLVED DESIGN The VICTRIX TT ErP range is designed to make the work of professionals easier. Immergas has invested significant resources for the industrialization of the parts of the appliance, making it particularly robust and has paid the utmost attention to details and finishes. VICTRIX TT ErP presents new technical features such as: • safety valve drain conveyed to the condensate drain • removable cover for direct access to the electrical connection compartment • cover casing for the water connections to better position the boiler in domestic spaces DIRECT ACCESSIBILITY TO THE ELECTRICAL CONNECTIONS COMPARTMENT In the lower part of the boiler there is a connection compartment accessible without the need to open the product but simply by removing the aesthetic cover, to house the electrical connections of the main devices that can be combined (for example CARV2, external probe, CRONO 7). ELECTRONIC AIR/GAS CONTROL The electronic gas valve allows air/gas control by means of a multifunction electrode placed inside the combustion chamber; the car electronic card adapts the combustion parameters in the event of variations in the density of the air or of the fuel. This allows VICTRIX TT ErP to be powered with any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example at the first commissioning by the Authorized Assistance Centre). The boiler is therefore supplied with a single product code. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase and provides only for the supply of spare parts.

Read more less

ATTENTION POSSIBILITY OF SUPPLY TO PROPANE THROUGH A SIMPLE ADJUSTMENT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Hermann Saunier Duval THEMA CONDENS 30 SB heating only condensing boiler complete with low NOx methane flue gas kit Model: Efficiency class Heating efficiency class A Heating Fireplace flow rate Qmin/max - 80/60 °C 3.6 - 30.6 generals Product code 0010025116 Dimensions HxWxD 740x418x344 THEMA Condens SB Wall-mounted combined condensing boiler for heating and domestic hot water in single-family units The new Thema Condens has a renewed aesthetic with modern and essential lines, flat casing to facilitate installation (dimensions and hydraulic connections unchanged compared to the previous version) and a new touch-screen user interface. The boiler has been designed as the ideal solution for single-family homes in case of replacement of traditional wall-mounted or condensing boilers that work on high-temperature or low-temperature systems. The high level of sanitary comfort is guaranteed by the exclusive Aquaspeed® technology which is able to offer the user immediate delivery of hot water at the desired temperature, without long waiting times and costly waste of water. The pre-heating of the primary circuit, and therefore also of the secondary stainless steel plate exchanger, in fact ensures an instantaneous response from the boiler to any sudden request for domestic hot water. Thema Condens is available in three power sizes: the 25 and 30 kW versions are joined by the new 35 kW size, all with methane fuel but convertible to propane via simple electronic regulation, without the need for any conversion kit. The range is also enriched with a new solution: the 25, 30 and 35 kW SB version (heating only) , which can be combined with any Hermann Saunier Duval boiler. Even the new SB boilers are methane powered, but electronically convertible to commercial propane. Ideal for installation in single-family homes New FlameFit® combustion system Hot water immediately available thanks to Aquaspeed® technology New design with flat casing and touch-screen user interface New heating only versions of 25, 30 and 35 kW ErP class A+ in combination with MiGo climatic control unit FlameFit® technology: maximum safety, low consumption, reduced emissions. The innovative FlameFit® combustion technology with which the version for single-family units is equipped allows for autonomous adaptability of the boiler to the different types and qualities of gas, always guaranteeing optimized and completely safe operation. In fact, the flame control electrode detects the changing characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting boiler operation to the actual needs of the user. This therefore leads to high performance with a reduced quantity of gas, saving energy and consequently limiting consumption and polluting emissions. The FlameFit® technology makes Thema Condens ready for immediate operation with any type of future gas, without the need for any conversion kit. Touch screen user interface The interface of the new Thema Condens features a modern digital touch display and was developed to facilitate boiler management by the user. The symbology of the various keys allows a quick understanding of the functions of the appliance and of the parameter setting methods according to one's comfort needs. Excellent visibility of parameters and icons Delivery temperature regulation Intuitive navigation Simplified programming All parameters under control Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: THE PRODUCT IS AVAILABLE ON ORDER. ATTENTION THE BOILER IS EQUIPPED WITH AUTOMATIC COMBUSTION CONTROL. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Baxi Luna Air 28 kw built-in boiler complete with Fumi-new ErP Methane or LPG exhaust kit Cod.A7736262 Technical features: Sanitary nominal thermal power: 28 kW Heating nominal heat input: 24 kW Useful efficiency (pci) PN – average temperature 70°C: 97.7% Nominal efficiency 50/30°C: 105.8% Seasonal space heating energy efficiency class: A Seasonal energy efficiency class of the sanitary fixture: A Water heating - Load profile: XL NOx class 6 according to EN 15502 Emission of nitrogen oxides NOx 15 mg/kWh Electronic ignition with flame ionization control Degree of protection: IPX5D Primary water/gas coil exchanger in AISI 316L stainless steel Secondary water/water exchanger in oversized stainless steel Electric 3-way diverter valve Modulating fan with electronic speed variation Automatic by-pass on the heating circuit Dimensions (boiler) hxwxd: 770 x 470 x 238 mm Dimensions (case) hxwxd: 1170 x 600 x 240 mm MOON AIR Luna Air is the new range of condensing boilers ideal for outdoor installations. remote digital control panel with LCD display as standard suspended installation in partially protected places open-air suspended installation with cover kit, available as an accessory minimum operating temperature: -15°C antifreeze function and IPX5D protection degree wide modulation range 1:7 greater efficiency and silence GAC (gas adaptive control): automatic combustion control built-in installation: the ultra-compact dimensions of the boiler, 770x470x238 mm, allow it to be installed in the majority of boxes on the market; recessed telescopic fittings kit available as an accessory predisposition for combination with the Baxi integrated solar system connection to Ø50 mm rigid and flexible drain pipe - for mod. 24 kW total length (exhaust+intake) 40 metres: solution for renovating flues and in case of replacement of a natural draft boiler with a condensing boiler With Luna Air it is possible to create three different installations: suspended installation in partially protected places; open-air wall-hung installation with cover kit; recessed installation with containment box Product Guarantee : All products for sale on our site are new and packed. The warranty on this product is 24 months from the date of purchase

Read more less

SAVIO InoxDens Moon 35 SA Condensing Boiler Complete With Low NOx Methane or LPG Fume Exhaust Kit - NEW Technical data Heating/DHW nominal heat input kW 31.0 / 34.7 Heating/DHW minimum heat input kW 3.8 / 3.8 Heating/DHW maximum useful power 60°/80°C * kW 30.6 / 34.1 Heating/DHW minimum useful power 60°/80°C * kW3 ,6 / 3,6 Heating/DHW maximum useful power 30°/50°C ** kW 28.3 / 33.7 Heating/DHW minimum useful power 30°/50°C ** kW 4.0 / 4.0 Condensate pH Ph 4.0 Yield name 60°/80°C * % 98.8 Yield min. 60°/80°C * % 94.5 NOx class 6 Minimum/maximum heating temperature **** °C 25 / 80 Minimum/maximum heating pressure bar 0.3 / 3 Expansion tank capacity (total/useful) l 7 DHW minimum/maximum temperature °C 35 / 55 Minimum/maximum DHW pressure bar 0.3 / 10 Maximum flow rate (ΔT=25 K) / (ΔT=35 K) l/min 20.5 / 14.3 Specific sanitary flow rate (ΔT=30 K) ***** l/min 17.0 Voltage/Power at nominal heat input V~/ W 230 / 116 Power at minimum heat input W 55 Power at rest (stand-by) W 3 Degree of protection IPX5D Height x Width x Depth mm 700 x 400 x 300 Weight kg 36 Boiler water content 2.5 l Code 10314.1031.0 Inoxdens Moon The InoxDens Moon condensing boiler , unlike traditional boilers, allows you to recover energy by condensing the water vapor contained in the exhaust fumes; that is, for the same amount of heat produced, it consumes less gas and furthermore the exhaust fumes contain fewer substances which are harmful to the environment. The materials that compose it and the regulation systems with which it is equipped offer safety, high comfort and energy savings, so as to be able to fully appreciate the advantages of autonomous heating. InoxDens Moon is the new SAVIO model of wall-mounted condensing boiler . It offers excellent performance and high yields that last over time, thanks to the innovative heat exchanger . Simple to use thanks to the digital control panel, with a display designed to communicate with the user easily and comfortably. Comfort is at your fingertips Thanks to the Savio Connect App it is possible to manage the boiler remotely. To use it, you need the optional Savio Connect KIT in addition to the advanced remote control. The advanced control (class V) makes it possible to modulate the system water delivery temperature according to the room temperature and the external temperature. What are the benefits? Reduction of consumption, energy saving and extreme flexibility: the regulation is flexible according to your needs and daily habits. The domestic hot water temperature can also be adjusted with a click Awareness of your system: you can always monitor the correct functioning of the heat generator in real time Safety: Possible anomalies can be seen in real time, together with the relative error code. In this way it will be possible to intervene immediately and when possible even remotely "SAVIO Connect" kit It is a WiFi "connection device" which, operating in the home WLAN network, allows control of room thermoregulation and boiler operation, both locally and remotely, using our dedicated APP. Technical features Boiler with single circuit primary exchanger in stainless steel, without joints and/or welds, which maintains high efficiency even on older systems New combustion system with patented gas-adaptive technology (Advanced Adaptive Gas Combustion Control – A²GC²) The electronics continuously analyze the combustion (CO2) through the flame signal and intervene by acting on the gas valve and fan, to allow correct combustion in all terms of use. The electronics allow the boiler to be easily adapted to the various types of gas without having to intervene with a mechanical transformation kit Instant production of domestic hot water with dedicated plate exchanger Domestic hot water pre-heating function: faster delivery of domestic hot water User interface with display and multifunction keys for adjusting and setting the parameters Easy to inspect standard by-pass Chimney Protection System: electronic management of fume overheating, guaranteeing maximum protection of the chimney Ducting on flues: particularly suitable for operation in flues that require ducting with high pressure drops Minimum polluting emissions (class VI - EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection (methane configuration) Removable casing in three pieces for easier maintenance or inspection For SV versions: possibility of setting the maximum power that can be supplied to the external boiler Gas-adaptive technology Less consumption, more efficiency, fewer emissions The innovative Adaptive Gas technology, which all models in the InoxDens line are equipped with, allows the boilers to be adapted in complete autonomy to the different types and qualities of gas. The electrode, in addition to detecting the flame, also detects the characteristics of the gas and automatically adapts the combustion parameters to maintain the maximum level of efficiency, with a consequent reduction in consumption and emissions compared to traditional control systems. The Adaptive gas system makes the boiler ready to operate with any type of gas without transformations. Automatic gas regulation Adaptation to changing gas quality Clean combustion The only model suitable for methane and LPG which allows you to optimize the warehouse In traditional boilers, the combustion values ​​are detected and adjusted only during maintenance, furthermore the composition of the gas network is not always constant and can create operating inefficiencies on boilers without combustion control devices, compromising reliability, savings and the quality of emissions. Thanks to the Gas-Adaptive system, the new condensing boilers electronically control combustion by managing the gas and air supply at best and at all times, automatically adapting the CO2. A "Plastic-FREE" production For a more sustainable environment A fundamental element that guided the entire design phase of the new InoxDens Moon boiler is the strong focus on the circular economy. For this we have used components with a higher rate of recyclability, eliminating the use of plastic as much as possible. The plastic group, for example, has been replaced with the brass group, a completely recyclable material. The protective shells of the boiler were made of cardboard and no longer of polystyrene. Furthermore, the front is no longer in plastic but in pressed steel. High circulation single coil primary heat exchanger Savio introduces the Round heat exchanger in 2017. Demonstrated the great reliability it adopts in the InoxDens Moon range. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER SAUNIER DUVAL SPAZIOZERO 4 CONDENSING 26 kW METHANE GAS BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Model: ErP efficiency class in heating/DHW: A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Heating Nominal power P min/max heating 80/60 °C: kW 5.5/26 Sanitary Rated power min/max (60 °C): kW 5.5/26 Specific flow rate (∆T=25 K): l/min 15 Peak flow rate in 10 minutes (ΔT = 30K): l/10 min 126 Electrical characteristics Total absorbed electric power: W 168 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 1140 x 550 x 246 mm CNG code (G20) - 10017158 METHANE version General characteristics SPAZIOZERO 4 CONDENSING The Spaziozero Condensing condensing boiler meets the needs of modern homes in terms of space and consumption. Only one 26 kW model is available. Characteristics Energy classification **** (92/42/EEC) with yields up to 108.3% Sanitary comfort *** (EN 13203-1), thanks to the exclusive Aquaspeed® technology with sanitary stainless steel plate exchanger with pre-heating function (Kombi models) Continuous domestic hot water (DHW) production up to 15 l/min (Kombi models) Solar Easy: prepared for integration with solar systems Low NOx emissions - class 5 (EN 483) Total premix burner and primary heat exchanger in anti-corrosion stainless steel High efficiency and modulating circulator Heating and DHW antifreeze protection -5 °C (standard) and -15°C with optional antifreeze kit Standard weekly timer control: user interface with remote control Automatic filling of the system • Only 24 cm deep for minimum encumbrance on balconies Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ariston condensing boiler CLAS ONE Wi-Fi 24 kW Complimentary flue gas kit Integrated Wi-Fi low NOx ErP nominal heat input max/min heating PCI kW 22.0 / 3.7 nominal heat input max/min DHW PCI kW 26.0 / 3.7 useful heat output max/min heating PCI kW 21.4 / 3.4 efficiency at nominal heat input (60/80° c) PCI % 97.5 efficiency at nominal heat input (30/50° c) PCI % 107.3 yield at 30% (30th c) PCI % 109.8 max/min heating temperature (high temperature) °C 82 / 35 max/min heating temperature (low temperature) °C 45 / 20 max/min domestic hot water temperature °C 60 / 36 quantity of hot water (deltaT 25°C) l/min 14.5 quantity of hot water (deltaT 35°C) l/min 10.4 specific flow rate (first 10' with deltaT 30°C) l/min 12.1 minimum operating temperature (-5°C with antifreeze kit)* °C > 0° supply voltage/frequency V/Hz 230 / 50 total absorbed electrical power W 77.0 electrical system protection degree IP X5D Energy class A Energy class in sanitary A XL withdrawal profile Dimensions HxWxD 745x400x315 Class One Wi-Fi Functionality: / XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head / Class A+ in heating reachable with thermoregulation / Modulation ratio 1:8 / Wifi integrated in the boiler /LCD displays / BusBridgeNet® communication protocol / AUTO function, Comfort / Optimized internal silencer / Installation in partially protected places / Smoke outlet 80, 60, 50 mm CLASS ONE WIFI XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less