FONDITAL FORMENTERA CTN 24 METHANE OPEN CHAMBER GAS BOILER. Characteristics of heating/DHW operation: Open chamber with natural draft Nominal heat output: 23 kW Efficiency at maximum power: 90.6% Efficiency at 30% load: 89.4% Classification according to 92/42/EEC: ** NOx class (EN 297/EN 483); 2 Min-max sanitary pressure: 0.5 - 6 bar Heating temperature adjustment °C 35-78 Expansion vessel capacity: 7 l DHW production ∆t 30°C: 11.2 l/min Total absorbed electric power: 57 W Degree of protection of the electrical panel: IPX5D Dimensions (hxlxp) 420x750x315 mm; 36kg METHANE power supply Warranty: 2 years FORMENTERA CTN Formentera CTN is a wall-hung instantaneous combined gas boiler with open chamber and natural draft. The gas boiler is equipped with a touch screen user interface and is set up to be powered by methane or LPG. Plus Touch screen user interface Boiler room temperature adjustment with external probe Sanitary heat exchanger with 26 plates Standard management of three types of solar thermal system Boiler change kit: Characteristics: High efficiency circulator with built-in deaerator Standard management of 3 types of solar thermal system Monothermal primary heat exchanger Sanitary heat exchanger with 26 stainless steel plates Integrated hydraulic unit including automatic by-pass, safety valve, pressure transducer, drain cock and connection to the expansion vessel Integrated electronic board for safety and flame modulation Sliding temperature operation with external probe (optional) Management of high and low temperature heating zones, via electronic board (optional) Efficiency classification according to 92/42/EEC: ★★ Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview FONDITAL DELFIS KC 28 METHANE CONDENSING BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ErP 2016: Wall-mounted pre-mixing condensing boiler with instantaneous production of domestic hot water, sealed chamber. Technical specifications Characteristics of heating/sanitary exercises: Forced draft sealed chamber Nominal heat input: 26.4 kW Rated heat output: 27.9 kW Efficiency at maximum power: 96.4% Efficiency 30% of load: 105.4% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production t 30øC: 15.0 l/min Sanitary pressure min-max: 0.5 - 6ÿbar Domestic hot water/heating maximum temperature: 62/83øC Expansion tank capacity: 9 l Heating consumption nominal power Metanm3/h 2.79 Sanitary consumption rated power Metanm3/h 3.22 Total absorbed electric power: 84 W Degrees of protection of the quadrielectric:ÿIPX4D Dimensions (hxlxp)ÿ700x400x250ÿmmÿ; 33.5kg METHANE power supply Warranty: 2 years Heating energy efficiency Class Aÿÿ Sanitaryware energy efficiencyprofilXL Class A Features list DELPHIS KC Wall-hung condensing premixing boiler with sealed chamber, with instantaneous production of domestic hot water The boiler, unlike the storage ones, allows instantaneous production of domestic hot water and uses condensing technology which allows a reduction in consumption, as well as low emissions of pollutants. Plus:ÿ Ultra compact Modulation ratio 1:9 User interface with LCD Boiler room temperature adjustment with external probe Supplementary relay for the management of 2 heating zones 9 liter expansion tanks Boiler change kit Features:ÿ Heat exchanger in thermopolymers and stainless steel Total premix burner Modulating gas valve with constant ratio/gas Combustion fan with variable speed Classification of performance according to 92/42/EEC: NOx emission class (EN 297): 5 3-speed circulator with built-in deaerator Availability of the boiler change kit as accessories Modulation wide range 1:9 Electronic ignition, ionization flame detection NTC temperature probes on the sanitary on the heating LCD interface with diagnostics Sanitary plate heat exchanger in stainless steel Motorized diverter valve Bypass Connection preparation:ÿ External probe 2 ambient probes CommandRemotOpen Therm Zone heating management card for high and low temperatures WHAT IS THE REGULATION? ERP A concrete help for our planet.ÿThe application of the Ecodesign and Ecolabeling regulations The European Union, as a result of the values ​​expressed by the Kyoto Protocol, sets itself an ambitious goal, known as the Pianeurope20, 20, 20 climate-energy goal. By 2020 the intention is to reduce greenhouse gas emissions by 20%, as well as energy consumption and to make sure that 20% of Europe's total energy demand comes from renewable energy sources. The energy consumed by buildings is estimated to be around 40% of total energy consumption. Of which 80% used for heating and domestic hot water: Heating67% Lighting and appliances 15% Hot water 14% kitchen 4% All combined heating only boilers must be equipped with High Efficiency circulators. Heating appliances without high-efficiency circulation pumps cannot be placed on the market after 1 August 2015. From 1 August 2015, high-efficiency circulation pumps may still be placed on the market. Starting fromÿ26 September 2015ÿall heat generators for space heating, appliances for the production of DHW and systems consisting of several of these appliances, with a Pn 400 kW for eco-design and with a Pn 70 kW for labelling, in order to be placed on the market, they must comply with the regulations issued by the European Union, indicated with the term ErP - Energy Related Products. The introduction of the ÿEcodesign Directiveÿ of 26 September 2015 also entails the ban on the placing on the market of almost all traditional atmospheric boilers The ErPÿ label for space heaters highlights the respective energy class on a scale from ÿA ++ÿ to Gÿ (for heat pumps up to D, while for accumulators from A to G). Starting from August 2019 a further restriction of the class will be applied, namely A +++ to D, for accumulators from A + to G, while for heat pumps (at low temperature) the label must carry information on the climatic zone. Fondital supplies all products subject to this standard with a label and a technical data sheet that distributors, retailers and specialized installers must use to define the products. Official labeling can only take place from 26 September 2015. PRODUCT LABEL In the product energy label, information on the efficiency characteristics is reported: I. brand name of the supplier II. model identifier III. reference to space heating and domestic hot water functions IV. efficiency class V. nominal heat output of the appliances YOU. sound power level in dB (sol heat pumps) VII. possible operation during dead hours (only heat pumps) The label is made available by Fondital and it is the responsibility of the distributors to make it clearly visible on each device at the point of sale, (soled only after 26 September 2015). SYSTEM LABEL All the combinations of appliances that will be installed, called systems, must also be subject to the energy classification through the system label. For example, a condensing boiler and a solar panel connected to a storage tank are considered a system subject to EcLabelling. The sameÿ system, composed of the previous components, accompanied in addition by a regulation device such as a chronothermostat, must be added to the system as it can improve the energy classification to be declared on the label. The calculation of the energy efficiency of the system must be provided by filling in a data sheet prescribed by the EC regulations and called a fiche. The energy classification of a system can be defined both by the manufacturer of the various components (e.g. pacchetticompletSulpack Easy) and by an installer retailer who builds a system with components supplied by different manufacturers. In the latter case, the installing retailer will have to rely on the generator label and on the information given in the technical data sheets supplied by the manufacturers of the individual generators and components to calculate the energy class of the system. Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

FONDITAL DELFIS KC 24 LPG CONDENSING BOILER _____________________________________________________________________________ Technical features Product code: KDOI12CR24 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A ________________________________________________________________________________________ Characteristics of heating/DHW operation: Forced draft sealed chamber Nominal heat input: 23.7 kW Rated heat output: 24.9 kW Efficiency at maximum power: 96.7% Efficiency at 30% load: 105.1% Classification according to 92/42/EEC: **** NOx class (EN 297/EN 483); 5 DHW production ∆t 30°C: 13.4 l/min Min-max sanitary pressure: 0.5 - 6 bar Domestic hot water/heating maximum temperature: 62/83°C Expansion vessel capacity: 9 l Heating consumption at nominal power Natural gas m3/h 2.51 DHW consumption at nominal power Natural gas m3/h 2.89 Total absorbed electric power: 83 W Degree of protection of the electrical panel: IPX4D Dimensions (hxlxp) 700x400x250 mm; 32kg LPG power supply ____________________________________________________________________________ General characteristics DELPHIS KC Wall-hung condensing premixing boiler with sealed chamber, with instantaneous production of domestic hot water The boiler, unlike the storage ones, allows instantaneous production of domestic hot water and uses condensing technology which allows a reduction in consumption, high efficiency and low emissions of pollutants. Pluses: Ultra compact Modulation ratio 1:9 User interface with LCD Boiler room temperature adjustment with external probe Supplementary relay for the management of 2 heating zones 9 liter expansion vessel Boiler change kit Characteristics: Heat exchanger in thermopolymers and stainless steel Total premix burner Modulating gas valve with constant air/gas ratio Variable speed combustion fan Efficiency classification according to 92/42/EEC: ★★★★ NOx emission class (EN 297): 5 3-speed circulator with built-in deaerator Availability of the boiler change kit as an accessory Wide 1:9 modulation range Electronic ignition, ionization flame detection NTC temperature probes on domestic hot water and heating LCD interface with diagnostics Sanitary plate heat exchanger in stainless steel Motorized diverter valve Bypass Connection setup to: External probe 2 ambient probes Open Therm Remote Control Zone heating management board for high and low temperatures __________________________________________________________________________________________________________________ The warranty on this item is 24 months from the date of purchase.

Read more less

FONDITAL PANAREA COMPACT CTN 24 AF METHANE OPEN CHAMBER GAS BOILER Characteristics of heating/DHW operation: Open chamber with natural draft Nominal heat output: 23 kW Efficiency at maximum power: 90.6% Efficiency at 30% load: 89.4% Classification according to 92/42/EEC: ** NOx class (EN 297/EN 483); 2 Min-max sanitary pressure: 0.5 - 6 bar Heating temperature adjustment °C 35-78 Expansion vessel capacity: 7 l DHW production ∆t 30°C: 11.2 l/min Total absorbed electric power: 57 W Degree of protection of the electrical panel: IPX5D Dimensions (hxlxp) 420x750x315 mm; 36kg METHANE power supply Warranty: 2 years FORMENTERA CTN Formentera CTN is a wall-hung instantaneous combined gas boiler with open chamber and natural draft. The gas boiler is equipped with a touch screen user interface and is set up to be powered by methane or LPG.  Pluses: Touch screen user interface Boiler room temperature adjustment with external probe Sanitary heat exchanger with 26 plates Standard management of three types of solar thermal system Boiler change kit Characteristics: High efficiency circulator with built-in deaerator Standard management of 3 types of solar thermal system Monothermal primary heat exchanger Sanitary heat exchanger with 26 stainless steel plates Integrated hydraulic unit including automatic by-pass, safety valve, pressure transducer, drain cock and connection to the expansion tank Integrated electronic board for safety and flame modulation Sliding temperature operation with external probe (optional) Management of high and low temperature heating zones, via electronic board (optional) Efficiency classification according to 92/42/EEC: ★★ Multifunction relay for connection to systems with zone valves or solar system or remote alarm signalling Dimensions Dimensions (LxHxP): 400x700x250 mm Weight: 25.2kg Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less