Riello Family AQUA CONDENS 3.5 condensing boiler with 60 lt boiler complete with flue gas exhaust kit - ErP ErP technical data Energy class A XL load profile Characteristics of exercise in SANITARY Nominal heat input kW 34.6 Nominal thermal power kW 34.6 Reduced heat input kW 3.5 | 6.2 Kettle water content l 60 Features exercise in sanitary Maximum heating pressure 3.0 bar Heating water content 4.3 l Expansion tank l 10.0 Electrical data Supply voltage V-Hz 230-50 IP X5D degree of protection Dimensions HxWxD mm 940x600x460 WATER CONDENS FAMILY AQUA CONDENS: LOTS OF HOT WATER FOR THE WHOLE FAMILY Family Aqua Condens is the condensing boiler which, thanks to the integrated 60-litre stainless steel storage tank, allows you to have a large availability of domestic hot water that is always ready; combines the advantage of immediately offering lots of hot water with energy savings that only condensing technology can achieve, guaranteeing high yields and low polluting emissions. Family Aqua Condens guarantees a large availability of domestic hot water and makes it possible to satisfy all the needs of medium and large domestic users, with two or more bathrooms, hydromassage tubs and to better manage simultaneous withdrawal requests. Family Condens combines excellent performance with a modern and refined design. The captivating user interface that allows access to the special Family functions and the lower connection cover give the boiler versatility and elegance. TECHNOLOGY KEEPING UP WITH SIMPLICITY All the parameters and special functions of the Family Condens boiler can be set and managed directly from the control panel with an original design and easy to use. The parameters and boiler operating status are displayed on the large digital display developed vertically. MEMORY KEY The machine intelligence is activated with the Memory key. - Heating memory: the delivery temperature is managed independently by the boiler to reduce heating times and limit sudden changes in temperature in the radiators. - Memory in DHW: the DHW usage habits are memorized with the Memory key; the boiler activates a water pre-heating process only when necessary and without waste. TOUCH&GO FUNCTION If the domestic hot water usage habits change, opening and closing the tap activates the instantaneous pre-heating which prepares the hot water only for that drawing. Reopening the tap after a few moments, hot water is immediately available. WELLNESS KEY By selecting the wellness button, the ideal water temperature for the shower is set, avoiding having to look for the right mix between hot and cold water. The temperature can be customized between 35 and 45°C at intervals of 0.5°C. INTELLIGENT FILLING WITH THE DROP BUTTON The flashing icon signals the need to fill the system before there is a total lack of water and the boiler blocks; by simply pressing the button, the automatic filling cycle is activated in total safety. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Possibility of propane supply by means of a simple regulation. For info, contact the local authorized assistance center in advance Hermann Saunier Duval MASTER CONDENS 31 kW condensing boiler with 42 liter methane or LPG boiler - NEW Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating Fireplace flow rate Qmin/max - 80/60°C kW 3.6 - 25.5 Sanitary Fireplace flow rate Qmin/max - 60°C kW 3.6 - 31.0 Specific flow rate (∆T = 25K) (EN13203) l/min 17.6 Dimensions mm (HxLxP) 892x470x582 MASTER CONDENS Wall mounted combined condensing boiler with integrated storage tank and Aquaspeed PLUS® system Limitless comfort. At the top of the range in terms of performance, sanitary comfort and optimization of consumption, the new Master Condens has a renewed design, flat casing to facilitate installation and an innovative touch-screen user interface. The improved Aquaspeed PLUS® technology, combined with the new FlameFit® gas-adaptable combustion system, guarantees exceptional sanitary comfort, while the two 21-litre boilers make Master Condens the ideal solution for large families and homes with several bathrooms, ensuring hot water reserve, immediately available. The new Smart Tank Loading function avoids unnecessary energy consumption: based on the user's daily needs recorded in the first few weeks, the boiler autonomously heats the water only when necessary. The range consists of three natural gas models of 26, 31 and 35kW, which can be converted to propane via simple electronic regulation. The hydraulic connections are unchanged from the previous version. Maximum sanitary comfort with the Aquaspeed PLUS® system Large quantities of hot water immediately available Temperature stability even with multiple simultaneous withdrawals New FlameFit® combustion technology Smart Tank Loading function High modulation up to 1:10 New 26kW model Modern design with touch-screen user interface New diagnostics and malfunction detection The new Master Condens range boasts exceptionally low consumption and is positioned at the top of the category both in terms of sanitary comfort and efficiency thanks also to the exclusive Aquaspeed PLUS ® system for the production of domestic hot water which allows for stable temperatures even in the event of large contemporary withdrawals for comfort at the highest levels. Innovation at the service of comfort. Aquaspeed PLUS® and integrated boilers: comfort is absolute Thanks to the implementation of the Aquaspeed PLUS® system and the two stainless steel boilers of 21 liters each, Master Condens guarantees exceptional sanitary comfort with extremely low gas consumption. The ideal solution to meet the need for large quantities of domestic hot water, the boiler is able to satisfy the simultaneous requests of multiple users while maintaining maximum stability of the temperature of the water supplied. By exploiting the principle of stratification, the two boilers are in fact able to supply up to 276 liters of water (ΔT = 30K) for ten minutes without temperature fluctuations: the water contained in the upper part of the first boiler is always kept hot and, in short time, the heat needed to reach the desired brewing temperature is transferred uniformly to the rest of the two interconnected boilers. FlameFit® technology: more efficiency, less consumption and emissions The innovative FlameFit® combustion technology with which all Master Condens models are equipped allows the boiler to be independently adapted to the different types and qualities of gas, always guaranteeing optimized and fully functioning safety. In fact, the flame control electrode detects the varied characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting the operation of the boiler to the actual needs of the user, with consequent energy savings, reduction of consumption as well as polluting emissions . FlameFit® technology makes Master Condens ready to operate with any type of future gas, without the need for conversion kits. New touch screen user interface The interface of the new Master Condens features a modern digital touch display and has been designed to simplify boiler management by the user as much as possible. The symbology of the various keys and the "talking messages" that can be viewed on the display allow for a rapid understanding of the main functions and how to set parameters according to one's comfort needs. 4-star energy classification (92/42/EEC) with yields up to 109.5%; 3-star DHW comfort (EN 13203-1), thanks to the exclusive Aquaspeed PLUS® technology with DHW plate heat exchanger in stainless steel and double dynamic storage tank (42 litres). Solar Easy . All models in the Master Condens range are compatible with all solar systems. If solar radiation is not sufficient to keep the domestic water at the desired temperature, the boiler intervenes as an integration. Master Condens is compatible with the MiGo WiFi control unit . The wall-mounted boiler is ready to be managed remotely simply with a smartphone. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Possibility of propane supply by means of a simple regulation. For info, contact the local authorized assistance center in advance Hermann Saunier Duval MASTER CONDENS 31 kW condensing boiler with 42 liter methane or LPG boiler - NEW Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating Fireplace flow rate Qmin/max - 80/60°C kW 3.6 - 30.6 Sanitary Fireplace flow rate Qmin/max - 60°C kW 3.6 - 34.8 Specific flow rate (∆T = 25K) (EN13203) l/min 20.0 Dimensions mm (HxLxP) 892x470x582 Possibility of propane supply through simple regulation MASTER CONDENS Wall mounted combined condensing boiler with integrated storage tank and Aquaspeed PLUS® system Limitless comfort. At the top of the range in terms of performance, sanitary comfort and optimization of consumption, the new Master Condens has a renewed design, flat casing to facilitate installation and an innovative touch-screen user interface. The improved Aquaspeed PLUS® technology, combined with the new FlameFit® gas-adaptable combustion system, guarantees exceptional sanitary comfort, while the two 21-litre boilers make Master Condens the ideal solution for large families and homes with several bathrooms, ensuring hot water reserve, immediately available. The new Smart Tank Loading function avoids unnecessary energy consumption: based on the user's daily needs recorded in the first few weeks, the boiler autonomously heats the water only when necessary. The range consists of three natural gas models of 26, 31 and 35kW, which can be converted to propane via simple electronic regulation. The hydraulic connections are unchanged from the previous version. Maximum sanitary comfort with the Aquaspeed PLUS® system Large quantities of hot water immediately available Temperature stability even with multiple simultaneous withdrawals New FlameFit® combustion technology Smart Tank Loading function High modulation up to 1:10 New 26kW model Modern design with touch-screen user interface New diagnostics and malfunction detection The new Master Condens range boasts exceptionally low consumption and is positioned at the top of the category both in terms of sanitary comfort and efficiency thanks also to the exclusive Aquaspeed PLUS ® system for the production of domestic hot water which allows for stable temperatures even in the event of large contemporary withdrawals for comfort at the highest levels. Innovation at the service of comfort. Aquaspeed PLUS® and integrated boilers: comfort is absolute Thanks to the implementation of the Aquaspeed PLUS® system and the two stainless steel boilers of 21 liters each, Master Condens guarantees exceptional sanitary comfort with extremely low gas consumption. The ideal solution to meet the need for large quantities of domestic hot water, the boiler is able to satisfy the simultaneous requests of multiple users while maintaining maximum stability of the temperature of the water supplied. By exploiting the principle of stratification, the two boilers are in fact able to supply up to 276 liters of water (ΔT = 30K) for ten minutes without temperature fluctuations: the water contained in the upper part of the first boiler is always kept hot and, in short time, the heat needed to reach the desired brewing temperature is transferred uniformly to the rest of the two interconnected boilers. FlameFit® technology: more efficiency, less consumption and emissions The innovative FlameFit® combustion technology with which all Master Condens models are equipped allows the boiler to be independently adapted to the different types and qualities of gas, always guaranteeing optimized and fully functioning safety. In fact, the flame control electrode detects the varied characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting the operation of the boiler to the actual needs of the user, with consequent energy savings, reduction of consumption as well as polluting emissions . FlameFit® technology makes Master Condens ready to operate with any type of future gas, without the need for conversion kits. New touch screen user interface The interface of the new Master Condens features a modern digital touch display and has been designed to simplify boiler management by the user as much as possible. The symbology of the various keys and the "talking messages" that can be viewed on the display allow for a rapid understanding of the main functions and how to set parameters according to one's comfort needs. 4-star energy classification (92/42/EEC) with yields up to 109.5%; 3-star DHW comfort (EN 13203-1), thanks to the exclusive Aquaspeed PLUS® technology with DHW plate heat exchanger in stainless steel and double dynamic storage tank (42 litres). Solar Easy . All models in the Master Condens range are compatible with all solar systems. If solar radiation is not sufficient to keep the domestic water at the desired temperature, the boiler intervenes as an integration. Master Condens is compatible with the MiGo WiFi control unit . The wall-mounted boiler is ready to be managed remotely simply with a smartphone. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Hermann Saunier Duval THEMA CONDENS 35 kW condensing boiler complete with low NOx methane fume kit Model: Efficiency class Heating efficiency class A Sanitary efficiency class - A Sanitary load profile - XL Heating Fireplace flow rate Qmin/max - 80/60 °C 3.6 - 30.6 Flow rate at the hearth min/max - 60°C 3.6 - 34.8 Continuous flow rate (ΔT = 25K)19.9 generals Nox class - 5 Electrical protection IPX - 5D Dimensions mm (HxLxP) 740x418x344 NB: PROPANE ADJUSTABLE THEMA Condens The new Thema Condens range , more ecological and more performing, meets the highest standards in terms of efficiency and comfort, thanks to the exclusive Aquaspeed® technology for the production of domestic hot water. The pre-heating of the DHW exchanger manages the required flow of DHW, always maintaining the temperature of its plates proportional to the comfort required by the user. External renewal with a refined design, but above all internal that allows a significant leap into the technological future as regards combustion. Thema Condens presents a new beating "heart" thanks to the new FlameFit combustion system which guarantees electronic self-adaptation to the different supply gases. In combination with the ADA technology for balancing the supply gas pressures, they provide the most correct air/gas mix necessary in order to obtain the best possible combustion. Guaranteed modulation values ​​can cover up to 1:9. These new product characteristics, together with an evolution in electronics, allow the boiler to fully adapt to the real demands of the heating system, also allowing for a reduction in gas and electricity consumption. 4-star energy classification (92/42/EEC) with yields up to 109.5%, 94% etas efficiency , 3-star sanitary comfort (EN 13203-1) thanks to the Aquaspeed® system which guarantees immediate delivery of hot water water at the desired temperature. Solar Easy: all models in the Thema Condens range are compatible with all solar systems. If solar radiation is not sufficient to keep the domestic water at the desired temperature, the boiler intervenes as an integration. All Thema Condens models are compatible with the installation of MiGo , the Wi-Fi modulating climate control unit which allows remote control and adjustment of the boiler functions. FlameFit® technology: maximum safety, low consumption, reduced emissions. The innovative FlameFit® combustion technology with which the version for single-family units is equipped allows for autonomous adaptability of the boiler to the different types and qualities of gas, always guaranteeing optimized and completely safe operation. In fact, the flame control electrode detects the changing characteristics of the gas and automatically adjusts the parameters to ensure perfectly efficient combustion, adapting boiler operation to the actual needs of the user. This therefore leads to high performance with a reduced quantity of gas, saving energy and consequently limiting consumption and polluting emissions. The FlameFit® technology makes Thema Condens ready for immediate operation with any type of future gas, without the need for any conversion kit Touch screen user interface The interface of the new Thema Condens features a modern digital touch display and was developed to facilitate boiler management by the user. The symbols of the various keys allow a quick understanding of the functions of the appliance and the parameter setting methods according to your comfort needs. Excellent visibility of parameters and icons Heating and domestic hot water flow temperature adjustment Intuitive navigation simplified programming All parameters under control Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

For LPG adjustment, contact your local Authorized Assistance Centre Technical features Model : Victrix Maior 35 TT Product code : 3.024880 Maximum nominal heat input in DHW: 34.9 kW Maximum nominal heat input in heating mode: 34.9 kW Minimum nominal heat input: 3.6 kW Maximum useful thermal power in DHW: 34.2 kW Maximum useful thermal power in heating: 34.2 kW Minimum useful thermal power: 3.5 kW Useful thermal efficiency at 100% Pn (80 / 60 °C): 97.9% Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) : 103.2% Useful thermal efficiency at 100% Pn (40 / 30 °C) : 106% Useful thermal efficiency at 30% of the nominal load. (40 / 30 °C) : 108.5% Minimum gas flow rate to the burner: 0.38 m 3 /h Maximum gas flow rate to the burner: 3.70 m 3 /h Weighted CO : 19 mg/kWh Weighted NO X : 26 mg/kWh Fan available head (max/min) Intake/Exhaust: 258/116 Pa Specific flow rate in continuous domestic hot water service (∆t 30 °C): 16.3 l/min DHW circuit minimum pressure: 0.3 bar Nominal heating expansion vessel capacity: 10 litres Electrical protection degree : IPX 5D Dimensions and weight Dimensions (HxWxD): 748x440x276 mm Empty weight: 33.4 kg Immergas Victrix Maior TT Comfort, saving, Top Tech technology It is the most advanced range of the "Top Tech" platform , the best of the technology produced on the new highly automated lines in the historic Immergas headquarters in Brescello Condensing technology to improve the energy class Two instantaneous versions and one PLUS for heating only: together they form a perfect range to adapt to the new European Directives on the use of energy. For this reason, the VICTRIX MAIOR TT range is ideal for new installations and for replacing existing appliances High flow rate, low risk of clogging The condensing module is innovative: it guarantees high flow rate and head on the heating circuit , low risk of clogging due to any impurities in the system and greater resistance to corrosion thanks to the special alloy with which it is made More energy savings, more sanitary comfort The new electronic card modulates the heating power of the boiler up to 12% and together with the low consumption circulator increases energy savings. The instantaneous models are equipped with a flow regulator and DHW inlet probe to obtain high DHW comfort, 3 stars according to the EN 13203 -1 standard The advantages of the Dominus app > Intuitive navigation and simple use via the touch screen of smartphones and tablets > Remote management with direct access to the main system settings such as: Operating status Heating/DHW delivery temperature set Room temperature Receiving error messages Generator reset > Accessible and usable at any time and from anywhere > Easy installation > Encrypted security access Dominus the app that controls the boiler "on the net". VICTRIX MAIOR TT can be remote controlled from the DOMINUS app. The app is simple and intuitive, and allows you to control the boiler or view its operation with a tablet, smartphone or laptop . Using the optional Wi-Fi transmitter kit (3.026273), to be interposed with a wireless modem/router (not supplied by Immergas), it is possible to communicate from anywhere with the boiler electronic board Formula Comfort 10 It benefits from the most comprehensive maintenance program lasting 10 years with no activation costs , with the possibility of extending it up to 15 years . In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check High hydraulic performance The new condensing module has been designed to have large water passages which allow interesting flow rate and head performance even on old heating systems. This also means a low risk of clogging in the presence of impurities in the system water. It is made of a special Aluminium-Silicon-Magnesium alloy, a material which – together with the high thicknesses used – is particularly resistant to corrosion . The water circuit runs through the exchanger in an ascending manner, in counter-current with respect to the flame. The dense pinning allows you to increase the exchange surface ensuring excellent water yield. It is important to maintain the pH of the heating system fill water, between 6.5 and 8.5 with a hardness of 15°F. Class A circulator The low-consumption modulating circulator guarantees considerable savings in electricity compared to a traditional circulator, furthermore the presence of two NTC probes on the heating flow and return allow the operating conditions to be continuously modulated according to the system's requests, increasing the seasonal efficiency . The circulator can be set in the operating modes: constant ∆t, proportional head or constant speed Wide modulation range The electronic card reduces operating costs thanks to particularly high yields even with low energy absorption, as occurs for example in the mid-seasons. In fact, the wide range of modulation of the device determines high seasonal yields Low power consumption in Stand-By, less than 6 W Advanced design Immergas research and development has worked to make VICTRIX MAIOR TT particularly robust and designed to facilitate the work of professionals. In particular, it presents new technical features such as: Safety valve drain conveyed to the condensate drain Removable cover for direct access to the electrical connection compartment Carter covering the hydraulic connections, to better set the boiler inside domestic spaces Direct access to the electrical connection compartment In the lower part of the boiler there is a connection compartment accessible without the need to open the product but simply by removing the aesthetic cover, to house the electrical connections of the main external devices (e.g. CARV2, external probe, CRONO 7) Standard connection unit With the supply of the boiler, the professional will find all the fittings for the plumbing and gas installation Easy to understand and use Clear adjustment knobs and selection buttons, LCD display for viewing the operating status: everything is easily accessible through the dashboard closing hatch for simple use by anyone Heating expansion tank The theme of the capacity of the expansion vessel is deeply felt by installers in case of boiler replacement in systems with a high water content. The entire VICTRIX MAIOR TT range uses a 10 liter vessel, ideal for systems with a high water content Indoor/outdoor installation The range is approved for operation outside the home as long as it is partially protected from atmospheric agents, rain and snow, for example by installing it under a balcony; the degree of electrical protection is IPX5D. An electric resistance kit is available to increase the antifreeze protection from -5 °C to -15 °C ( 3.017324 ). It is also possible to combine the entire range with GAUDIUM SOLAR BASE V2 and GAUDIUM SOLAR PLUS BASE V2 systems Electronic air/gas control The new electronic gas valve allows air/gas control via a multifunction electrode placed inside the combustion chamber; the car electronic card adapts the combustion parameters in the event of variations in the density of the air or of the fuel. This allows you to feed VICTRIX MAIOR TT with any type of fuel (methane/LPG or propane air), by intervening only on the electronic board software even at a later time (for example at the first commissioning by the Authorized Assistance Centre). The boiler is therefore supplied with a single product code High performance domestic hot water On the DHW circuit of the VICTRIX MAIOR TT versions there is an electronically controlled water flow regulator. The domestic hot water temperature is controlled by 2 probes. This component determines very high sanitary performance such as: maximum quantity of domestic hot water at the taps at the desired temperature and constant quantity/temperature as the inlet pressure from the aqueduct varies. To reduce waiting times for the delivery of domestic hot water, the BOOST function can be activated Combination with solar systems VICTRIX MAIOR TT can receive pre-heated water from a solar storage tank, simply by inserting a mixing valve. Thanks to the standard DHW inlet probe, the burner and the circulator will be kept off for the entire duration of the withdrawal, if the temperature of the water coming from the solar storage tank is equal to or higher than that set on the selector Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Energy class in heating: A; Energy class in sanitary: A; Load profile: XL; Nominal heat input (min/max): 3.5/34.60; Electric power (min/max): 25/116W; NOx Class 5 Power supply: METHANE. Heating performance: Maximum pressure: 3bar; Heating temperature range: 20 - 80 °C; Pump: maximum head available to the system: 320 mbar; Expansion tank capacity: 10 litres; Performance in Healthcare: Pressure (min./max): 0.2/ 8 bar; Quantity of hot water with ∆t=25°: 17.2 litres/min Minimum domestic water flow rate: 2 litres/min; Domestic hot water temperature range (min./max): 35/60 °C; Sanitary water content: 60 litres; Functions: Condensing exchanger: which allows to guarantee high performance while respecting the European directives in terms of energy efficiency and low emissions; Comfort: which automatically adjusts the temperature based on the external climate; Modulation 1:10: avoid energy waste by offering you the real energy requirement. Low consumption modulating circulator: Reduces electricity consumption by up to 60% General characteristics The Exclusive Boiler Green HE boiler is managed by a high modulation range (1:10), and by a low consumption modulating circulator, offering efficiency and high technology such that it can also integrate solar systems and innovative technological systems. For easy and efficient management of the boiler, there is an intuitive liquid crystal display which allows you to program and set the numerous functions available, as well as to adjust the temperature of the domestic hot water simply by turning the appropriate knobs. pressing a key activates the easy filling function which allows the boiler to be filled, always having hot water available and satisfying one's comfort. The panel integrates the climate function thus allowing the temperature to be adjusted automatically Dimensions (HxWxD) 950x600x462 mm; 68kg.

Read more less

NB: THIS ARTICLE WILL COME AFTER JANUARY 6 Ariston condensing boiler Genus One+ Net 35 kW Low NOx Methane or LPG with free Sensys HD smoke kit STANDARD Wi-Fi Alexa and Google Home - NEW Energy class A++* Energy class in sanitary A Pickup profile XXL COMBUSTION Nominal heat input in heating max/min PCI kW 31.0 / 3.5 Nominal heat input in DHW max/min PCI kW 34.5 / 3.5 Max/min heating thermal power (80°C-60°C) PCI kW 30.3 / 3.3 Efficiency at 30% at 30°C PCI % 109.4 HEATING CIRCUIT Maximum heating pressure 3 bar Expansion vessel capacity l 8 Heating temperature min/max °C 20 / 82 SANITARY CIRCUIT Min/max DHW temperature °C 36 / 60 Instantaneous amount of hot water ?T=25°C l/min 19.8 ELECTRICAL DATA Supply voltage/frequency V/Hz 230/50 Degree of protection of the electrical system IP X5D Dimensions HxDxL mm 745x385x400; 35kg *Achievable with standard thermoregulation accessory and web reference for external temperature Genus One+ Net Ariston excellence guaranteed for 10 years thanks to the smart protection assistance programme. Latest generation condensing boiler integrated wifi and voice control , hydrogen compatible up to 20%. Voice control With genus ONE+ NET your voice is enough to manage the comfort of your home, thanks to the integration of the ariston net google home amazon alexa app Ariston NET With ariston NET you have comfort at your fingertips. Remote control, consumption reports and online technical support, all in one free smartphone app Top of the range condensing boiler, with integrated connectivity and compatible with 20% hydrogen blends Patented XtraTech™ high head stainless steel heat exchanger Modulation ratio 1:10 Low NOx levels (24 mg/kWh) Silent operation (only 46 db(A)Mod. 24kW) Compatibility with natural gas, LPG and propane air without the use of kits Ignition Control System+, stable and safe performance Hydro Sensor System, constant monitoring of system pressure Flow Control System+, optimal balance of flow and comfort Integrated Wi-Fi and ARISTON NET connectivity as standard Tempered and scratch resistant glass panel Large LCD display with touch interface Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CAUTION Methane, LPG and propane air operation without the need for a kit. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu. Technical features Model : ALTEAS ONE+ NET 35 Code: 3301773 Nominal heat input in heating max/min PCI : 31.0 / 3.5 kW Nominal heat input in DHW max/min PCI : 34.5 / 3.5 kW Power supply: methane/LPG Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: A+ Sanitary Energy Efficiency Class: A Withdrawal profile: XXL Combustion efficiency (flue gas) % 97.9 Efficiency at nominal heat input (60/80°C) PCI % 98.1 Efficiency at nominal heat input (30/50°C) PCI % 107.8 Efficiency at 30% at 30°C PCI % 109.4 Minimum efficiency (60/80°C) PCI % 94.2 health circuit DHW temperature min/max °C 36/60 Specific flow rate in DHW (10 min. with ΔT=30°C) l/min 16.5 Instantaneous quantity of hot water ΔT=25°C l/min 19.8 Instantaneous quantity of hot water ΔT=35°C l/min 14.1 Domestic water pressure max/min bar 7/0.2 Minimum withdrawal of hot water l/min 2 Dimensions and weight LEGEND A System delivery Ø 3/4” gas B DHW outlet Ø 1/2” gas C Gas inlet Ø 3/4” gas D DHW inlet Ø 1/2” gas E System return Ø 3/4” gas Weight : 36kg Description Latest generation condensing boiler with integrated Wi-Fi and voice control. Compatible with hydrogen blends up to 20%. VOICE CONTROL: With Alteas ONE+ NET your voice is enough to manage the comfort of your home, thanks to the integration of the Ariston NET App with Google home and Amazon Alexa. H2 READY: Compatible with 20% hydrogen blends. An important first step in our ongoing commitment to using hydrogen for heating. CLASS A+: Thanks to the SENSYS HD series thermostat it is possible to reach class A+ and save on bills. Maximum durability thanks to the Ariston exclusive XtraTech™ heat exchanger Ignition System+ for electronic combustion control Tempered and scratch resistant glass panel Sensys HD thermostat included as standard Integrated Wi-Fi, always connected to the Ariston NET App for remote control Voice control thanks to integration with Google home and Amazon Alexa Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION Methane, LPG, Propane air Ready through a simple configuration the boiler is able to operate on methane, LPG and propane air without the use of additional conversion kits. For information, contact the authorized service center in your area in advance Ferroli Bluehelix Alpha 34C condensing boiler complete with flue gas exhaust kit Methane or LPG code 0TPF7AWA Energy label specifications according to European ErP directive Heating energy efficiency Class A Energy efficiency of sanitary equipment XL profile Class A Heating/sanitary operation features: Max / min heating heat output (Hs) kW 34.1 / 5.5 Maximum sanitary heat output (Hi) kW 34.8 Max. heating operating pressure bar 3 Min. heating operating pressure bar 0.8 Heating expansion vessel capacity 10 litres Maximum sanitary operating pressure bar 9 Minimum sanitary operating pressure bar 0.3 Sanitary flow rate ∆t 25°C l/min 19.5 Degree of protection (IEC 60529) IP IPX4D Power supply voltage V/Hz 230V / 50Hz Dimensions HxWxD mm 700x420x320 Bluehelix Alpha .. More beautiful than "BEFORE" The new range of generators is equipped with the proven stainless steel exchanger . Designed and built according to the new ErP directives for eco-friendly design and labelling, BLUEHELIX ALPHA is at the top of its category. TOP EFFICIENCY EVEN ON OLD SYSTEMS (REPLACEMENTS) mod. 24 C COMBINATED (14 l/min at ∆t 25°C) The BLUEHELIX ALPHA thermal group exchanger (fig. A) compared to the more classic and widespread steel exchanger. This geometry allows the exchanger to operate almost at maximum design efficiency even in conditions of partial clogging, while with the same quantity of deposits and sediments (e.g. due to installation on old systems) the exchanger in fig. B tends to clog much more quickly in the part in contact with the flame due to the reduced fluid passage area, in which a real barrier of deposits * is formed which hinder the heat exchange and reduce the efficiency below the nominal values BLUEHELIX ALPHA VIEW FROM INSIDE EXCHANGER Single-circuit stainless steel exchanger with high passages, resistant to clogging and easy to clean STEEL FRAME Made with high precision automated processes EXPANSION VESSEL 8 litre expansion vessel placed laterally ELECTRIC PANEL FAN Offset fan, to facilitate maintenance of the primary exchanger without disassembly DOMESTIC HOT WATER EXCHANGER In stainless steel, with copper brazing High efficiency CIRCULATOR, for heating and exchange with the sanitary circuit SEALED CHAMBER Removable steel panel protecting the combustion chamber with sealed chamber function ELECTRICAL PANEL Large removable electrical panel protects against water damage that may occur during normal maintenance. Easy access to electrical connectors. THE ENGINE The tube that makes up the BLUEHELIX ALPHA exchanger is made of stainless steel, a material that allows for the creation of an extremely smooth surface, therefore less susceptible to scaling agents and deposits. BOILER CONTROL The BLUEHELIX ALPHA control unit consists of an easy-to-use interface with a backlit display. Using the buttons, you can easily adjust the heating flow temperature, the domestic hot water setpoint, turn the generator on/off or activate the comfort function, monitoring the boiler status. The control panel is completed by a traditional pressure gauge that can check the system pressure at any time. MC2 The electronics controls the flame ionization current to ensure optimal combustion when the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air/gas ratio itself and therefore combustion. MC2: Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use when the conditions of the gas network vary (e.g. fluctuations or reduced pressures). MGR Methane, LPG, Propane Air Ready The electronics controls the flame ionization current to ensure optimal combustion when the air density or gas quality varies. The relationship between the air/gas ratio (λ) and the flame ionization signal is used to control the air/gas ratio itself and therefore combustion. MC2: Multi Combustion Control, the new combustion system with patented Gas-adaptive technology improves the adaptability of use when the conditions of the gas network vary (e.g. fluctuations or reduced pressures). Thanks to the new electronics supplied, the gas change operation is extremely simple. The MC2 combustion control constantly monitors the quality of combustion and by simply modifying a parameter of the electronic board (operation to be carried out only by qualified personnel) it is possible to operate the boiler on Methane or LPG or Propane Air. It is therefore not necessary to purchase additional accessory kits. CONNECT New wireless remote control available as an accessory for managing home comfort also from a smartphone using the connect app (iOS and Android). Maximizes room comfort with modulation of the flow temperature through the Ambient Climate Compensation (CCA) and External Climate Compensation (CCE) functions via external temperature detectable directly from the internet (or from an optional external probe). Improves the average seasonal efficiency in space heating by +4%. EASY MAINTENANCE Trouble-free maintenance At the time of the first maintenance, the technician can realize the care with which every detail has been designed to facilitate his work. Thanks to the maximum accessibility of the main components, the BLUEHELIX ALPHA thermal group allows maintenance to be performed with maximum precision and speed. Some examples: - The electrical box of the electronic board can be easily extracted from the chassis leaving free access to the internal parts. - Easy access to the burner group by removing 4 screws and the quick coupling (clip) of the fan. - The extra-large passage exchanger is designed to challenge the hardest waters and is easily cleanable thanks to the single-tube, non-collector circuit. - The domestic water inlet filter can be removed very easily directly from the inside without having to remove the boiler's hydraulic connections. - The possible dismantling and replacement of the plate exchanger is done simply by removing two Allen bolts accessible from the front SUN EASY FUNCTION BLUEHELIX ALPHA has been designed to be easily inserted into systems created with the latest technologies. The SUN EASY system uses electronics that simplify the combination with both natural and forced circulation solar panels. Using a sensor placed on the sanitary circuit, it continuously monitors the temperature of the water preheated by the solar panels, providing for the ignition of the burner only in the event that the latter falls below the level necessary to guarantee optimal comfort for the user. STOP AND GO FUNCTION When using sanitary mixer taps, short or very short deliveries for quick rinses cause the boiler ignition procedure to start, which usually ends immediately. The persistence of these "false starts" can, in the long run, compromise the average life of the product. For this reason, BLUEHELIX ALPHA provides an electronics parameter through which it is possible to delay the ignition of the burner (Stop and Go) by activating it only in the face of actual withdrawals of domestic hot water. EXTERNAL INSTALLATION - ANTIFREEZE FUNCTION To make the most of the available space, the new BLUEHELIX ALPHA 24 - 28 C boiler can be installed flush with the wall using the special kit; for more critical installations, in completely uncovered places not protected from atmospheric agents, the “painted cabinet” kit is also available. If the temperature in the boiler drops to 5°C, the burner automatically lights up and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. ECO-COMFORT HEALTHCARE FUNCTION In ECO mode, domestic hot water production occurs according to traditional standards, allowing energy savings during periods of non-use. In COMFORT mode, thanks to the special system for maintaining the temperature of the heat exchanger, the supply of domestic hot water becomes even faster and more comfortable. The efficiency and load profiles according to the ErP directive are at the top of the category: mod. 24 C / A - XL. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE TRANSFORMATION KIT WILL BE SUPPLIED AS STANDARD. FOR INFORMATION, CONTACT THE AUTHORIZED ASSISTANCE CENTER IN YOUR AREA IN ADVANCE Ariston Condensing Boiler CLAS B ONE 35 Methane or LPG 40 lt storage complete with flue gas exhaust kit code 3301212 Product code: 3301212 Energy label specifications according to European ErP directive Heating energy efficiency Class A Energy efficiency sanitary XXL profile Class A Heating/sanitary operation features: Nominal heat input max/min (heating) PCI: 31-5.0 kW Nominal heat output max/min (sanitary) PCI: 34.5-5.0 kW Max/min useful thermal power (heating):30.2-4.7 kW Efficiency at nominal heat output (60/80°C) PCI: 97.3% Efficiency at nominal heat output (30/50°C) PCI: 106.5% Efficiency at 30% (30° C) PCI: 109.3% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C Max/min sanitary temperature: 65-40°C Quantity of hot water (deltaT 25°C): 26.5 l/min Quantity of hot water (deltaT 35°C): 18.9 l/min Specific flow rate (first 10' with deltaT 30°C): 22.1 l/min Minimum operating temperature > 0°C Modulation ratio 1:7 Power supply voltage/frequency V/Hz 230-50 Total absorbed electrical power: 84W Electrical system protection degree IP X5D Dimensions 24 kW mm (HxWxD) 900 x 600 x 474 Power supply: Methane or LPG LPG conversion kit as standard Functionality: XtraTech™ stainless steel primary exchanger AUTO, Comfort functions Internal Installation CLASS B ONE Ariston exclusive XtraTech™ stainless steel exchanger, with high prevalence Exchanger passage sections +142% compared to the previous version LCD display 2 x 20 litre stainless steel stratification boilers Class A+ in heating achievable with thermoregulation Modulation ratio 1:7 BusBridgeNet® communication protocol Optimized boiler heating logic AUTO and Comfort function Prepared for sanitary recirculation Flue pipe 80, 60, 50 mm Comfort Function Speeds up the delivery of hot water in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last dispensing). Auto Function Maximum comfort, efficiency and energy savings based on automatic analysis of environmental conditions, connected external devices and required performance. System Management New communication protocol designed to ensure complete system management. Super silence Silence in all operating modes. High efficiency Product characterised by high energy performance, reduced consumption and polluting emissions. Made in Italy Produced entirely in Italy. Product Warranty All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

RINNAI condensing boiler ZEN 34 kW Low NOx Integrated Wi-Fi Integrated Condensate Neutraliser cod. REB-KBI3535FF-LPG LPG Complete with Smoke Kit Code REB-KBI3535FF-NG Heating energy efficiency class A Profile / Domestic hot water energy class XL / A Noise level indoors (dB) 43 Performance Nominal heat input on PCI Heating (kW) 34.9 Qnw Nominal heat input on Sanitary PCI (kW) 34.9 NOx class 6 Maximum electric power absorbed in heating (W) 95 Degree of protection IPX5D Expansion vessel content (l) 9 Domestic hot water delivery (∆T=35°C) (l/min) 14.0 Dimensions Dimensions (W x H x D) (mm) - Empty weight (kg) 440x660x335 - 37 ZEN Instantaneous gas condensing heat generator for heating and domestic hot water production, complete with standard Wi-Fi chronothermostat with adjustment and self-diagnosis function. Standard Wi-Fi chronothermostat. Daily and weekly scheduling, consumption reports, change settings anywhere and anytime. Characteristics: Low NOx metal fiber burner Exchanger in stainless steel Integrated condensate neutraliser Standard antifreeze down to -20°C IPX5D protection Outdoor Earthquake sensor* (For greater safety, in the event of medium or high intensity seismic events, the sensor isolates the boiler from the gas system.) Integrated climatic probe Eco-sustainable condensation Warranty All products for sale on our site are new and packed. The guarantee on this article is 24 months from the date of purchase.

Read more less

Chaffoteaux Condensing Boiler mod. NIAGARA ADVANCE 25 C low NOx Complete with CNG exhaust kit 3310626 Code: 3310626 Power 25 kW Energy class in heating A Energy class in sanitary A XL withdrawal profile Dimensions HxWxD 900 x 600 x 460 mm Technical data Nominal heat input in heating max/min (Hs) Qn 22/2.5 kW kW Max/min DHW nominal heat input (Hs) Qn 26.0/2.5 kW kW Efficiency at nominal heat input (60/80°C) Hi/Hs 97.7/87.9% % Performance stars (dir. 92/42/EEC) **** NOx class 6 Expansion tank capacity 8l Power supply voltage/frequency 230 / 50 V/Hz Degree of protection of the electrical system IP X5D NIAGARA ADVANCE Niagara Advance , a concentrate of performance, comfort and compactness, combines the technology of the new Advance range with two 20-litre boilers to meet the most demanding domestic hot water needs. MAXIMUM PERFORMANCE New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. MAXIMUM COMFORT Modulation ratio 1:10. Optimized internal silencer. SRA function. Gas transformation with kit included as standard. Ready for Chaffolink connectivity. HEALTHCARE COMFORT 40 liter reserve thanks to two stratified stainless steel inter-accumulators. Permanent availability of domestic hot water even with discharged inter-tanks. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate up to 19.8 l/min with ΔT = 25ºC. Integrated 2-litre sanitary expansion tank. EASY INSTALLATION Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 20% energy savings in combination with Expert Control and the SRA function. Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less