ATTENTION THE OPERATION OF THE METHANE OR LPG BOILER IS USED THROUGH THE STANDARD KIT. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ariston condensing boiler CARES PREMIUM EXT 25 for outdoor methane or LPG complete with flue exhaust kit cod. 3301229 Product code: 3301229 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Heating/sanitary features: Nominal heat input max/min (heating) PCI: 23.5/5.5kW Nominal heat input max/min (sanitary) PCI: 23.5/5.5 kW Max/min useful heat output (heating): 22.9/5.3 kW Efficiency at nominal heat input (60/80°C) PCI: 97.5% Efficiency at nominal heat input (30/50°C) PCI: 103.9% Efficiency at 30% (30°C) PCI: 108.3% Max/min heating temperature (high temperature): 82-35°C Max/min heating temperature (low temperature): 45-20°C DHW max/min temperature: 60-36°C Quantity of hot water (deltaT 25°C): 12.6 l/min Quantity of hot water (deltaT 35°C): 9.0 l/min Specific flow rate (first 10' with deltaT 30°C): 10.5 l/min minimum operating temperature (with antifreeze kit) -15°C Power supply voltage/frequency V/Hz 230-50 Total absorbed electric power: 80W Degree of protection of the electrical system IP X5D Dimensions mm (HxWxD) 770 x 505 x 240 External installation Power supply: methane Functionality: Thermoregulation included: Sensys system manager + external probe CARES PREMIUM EXT Aluminum-silicon condensing exchanger Modulation ratio 1:4 BusBridgeNet® communication protocol Sensys system manager and standard external probe Minimum operating temperature down to -20°C* Electro-galvanized coat for outdoors Smoke outlet 80, 60 mm MET/LPG operation with standard kit (model 25) Comfort function Speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last draw). Auto function Maximum comfort, efficiency and energy savings based on the automatic analysis of the environmental conditions, connected external devices and required performance. Easy Installation Small footprint for easy installation. System management New communication protocol designed to ensure complete system management. High efficiency Product characterized by high energy performance, reduction of consumption and polluting emissions. Extra small size Extremely small footprint to adapt to any space problem. Made in Italy Made entirely in Italy. Modulating circulation Modulating circulator for optimizing consumption and maximizing performance. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! Built-in Unit NOT Included Technical features Model : Luna IN Plus 26 Wi-Fi DHW nominal heat input: 26.8 kW Nominal heating heat input: 20.6 kW Heating energy efficiency class: A DHW energy efficiency class: A Load profile : XL Auxiliary electricity consumption: 0.013 ~ 0.030 kW Rated Electric Power: 87W Minimum operating temperature: -15°C Expansion vessel capacity: 8 lire Heating circuit water temperature adjustment: 25° ~ 80° C Sanitary water temperature adjustment: 35° ~ 60° C Specific flow rate according to EN 13203-1 : 12.4 l/min Sanitary water production ∆T 25 : 14.9 l/min DHW circuit minimum water flow rate: 2 l/min Heating circuit water pressure: 0.5 ~ 8 bar Sound power level : 49 dB(A) Degree of Protection : IPX5D Maximum length Ø 60/100 concentric exhaust-intake pipe: 10 m Maximum length of Ø 80 split exhaust-intake pipe: 80 m Maximum flue gas temperature: 80° C Power supply: CNG / LPG Dimensions and weight Dimensions (HxWxD): 770x470x238 mm Weight : 32.5Kg Dimensions with case (HxWxD): 1170x600x245 mm Baxi Luna in Plus boiler with standard Wi-Fi Built-in solutions for outdoor installations Luna IN Plus is the new range of wall-mounted condensing boilers ideal for outdoor built-in installations thanks to the fittings kit for built-in installation supplied as standard . Luna IN Plus is also available in the version with Wi-Fi control panel kit for outdoor boilers supplied as STANDARD With Luna IN Plus it is possible to create three different installations : 1. Recessed installation with containment case 2. Hanging installation in partially protected places 3. Open-air suspended installation with cover kit Luna IN Plus is the ideal boiler for built-in installation outdoors specifically designed to replace an old built-in generator. The extremely compact dimensions of the boiler facilitate its installation in small/medium-sized apartments (even in new homes) and in general in all housing units where efficient space management is an important objective (eg in technical rooms or in the presence of containment boxes) The bracket and installation fittings for inserting the boiler into the containment box are supplied AS STANDARD (available as an accessory) inside the packaging Outdoor hanging installation Luna IN Plus can be suspended outdoors, in partially protected places (eg balconies) and also in the open with the addition of the outdoor cover kit . To facilitate installation, the telescopic fitting kit accessory is available in both installations (with gas and sanitary water tap). Inside the packaging are the template and the hooking bracket for wall installation Wi-Fi control panel kit for outdoor boilers Chronothermostat with integrated WI-FI module that connects to the home internet network without having to connect other devices to the router. Supplied STANDARD in the Luna IN Plus 26 Wi-Fi model. Optional accessory for all other models Color display with 3 selectable color themes Hybrid App for smartphone for remote control Possibility of connecting to one or more units to control the temperature, manage the weekly programming, view the consumption graph, read any error messages, set the holiday mode Management from different smartphones, so that more people can interact with the chronothermostat Simple installation by connecting 4 wires between the chronothermostat, the power supply and the boiler Enable the Baxi remote assistance service by your side which allows remote management by the Baxi authorized Service network on the status of the installation Baxi Luna IN Plus Wide modulation range Greater efficiency given by less switching on and off: with a high modulation ratio, the reduction of continuous switching on/off cycles leads to a significant reduction in consumption (by 8-10%) and an equal reduction in polluting emissions GAC Gas Adaptive Control It is an innovative system which, thanks to a new control electronics and a new electronic gas valve, guarantees automatic combustion control to constantly maintain maximum efficiency values. Compactness It has a depth of only 238 mm which allows it to be installed in most cases on the market Digital control panel The Luna IN Plus boiler is equipped with a digital control panel that allows easy programming and immediate boiler operation diagnostics with recording of the latest anomalies Antifreeze function The boiler has been designed to operate down to -15°C. Furthermore, the anti-freeze function provides for the automatic ignition of the burner, avoiding freezing phenomena. Main Features Luna IN Plus • WI-FI control panel kit STANDARD in the Luna IN Plus WI-FI model: Hybrid App for smartphone for remote control of the boiler. Optional accessory for all other models • Remote digital control panel with LCD display STANDARD in Luna IN Plus models • Connection to zone system • Built-in installation: the ultra-compact dimensions of the boiler, 770x470x238 mm, allow it to be installed in the majority of boxes on the market • STANDARD built-in installation kit (gas tap/gas inlet/telescopic fittings) • Automatic system filling system • Hydraulic group in brass • Minimum operating temperature: -15°c • Antifreeze function and IPX5D degree of protection • Wide modulation field 1:7 greater efficiency and silence • GAC (Gas Adaptive Control): automatic combustion control • Hanging installation in partially protected places • Open-air suspended installation with cover kit, available as an accessory • Arrangement for combination with the Baxi integrated solar system Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: FOR THE OPERATION OF THE LPG BOILER IT IS NECESSARY TO CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Beretta MYNUTE E 25C Low NOx condensing boiler complete with Methane or LPG fume exhaust kit - NEW Boiler code 20164601 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A NOx emission class 6 XL Load Profile Technical features Heating thermal capacity (max-min) kW 25.00-5.00 Nominal DHW heat input (max-min) kW 25.00-5.00 Expansion vessel capacity on membrane l8 DHW production at ΔT= 25°C / 30°C / 35°C l/min 14.3/11.9/10.2 Supply voltage V-Hz 230 - 50 IP X5D degree of protection DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 29 kgs MYNUTE E BERETTA PRESENTS MYNUTE E, THE NEW CONDENSING BOILER WHICH, COMBINING RELIABILITY AND COMFORT WITH INSTALLATION FLEXIBILITY, IS THE IDEAL CHOICE FOR REPLACING The new MYNUTE E range is divided into three models combined in 25 kW and 32 kW power, one of which is a 25 kW DIN version, to also allow the replacement of boilers with hydraulic standards other than Beretta. The linear and modern design, in line with the recent generation Beretta boilers, the compactness of the dimensions and the installation flexibility make MYNUTE E easy to integrate into any living environment, both inside homes and outdoors (in partially protected places) or built-in, using dedicated accessories. The good efficiency, which places the range in class A, the ease of use and maintenance, and the excellent comfort, both in heating and DHW, complete the profile of this product, which will be appreciated for its reliability and functionality, in perfect harmony with the MYNUTE Beretta tradition. MYNUTE E, RELIABILITY AND FLEXIBILITY FOR A WORRY-FREE REPLACEMENT FEATURES Aluminum condensing exchanger Modulation range 1:5 Low consumption modulating circulator (EEI ≤ 0.20), 6 m Low NOx emissions: CLASS 6 (UNI EN 15502) Availability of 25kw model also with sequence of DIN type hydraulic connections, ideal for replacing products with the same type of connections Installation flexibility: indoor, outdoor and recessed installation (in a partially protected place) The 25C and 25C DIN models are C10 approved. Smoke clapet (non-return valve) available as an accessory Click-fit flue connection: fast and safe, without the need for an external collar Antifreeze heater kit, hydraulic connections and external probe available as accessories IPX5D electrical protection degree “DOUBLE T” template supplied Compatible with hybrid connects for managing up to two system zones Compatible with air-propane gas (25C and 25C DIN models) and with LPG, through optional kits. For gas conversion, contact authorized Beretta Technical Assistance Centres Compatible with BeSmart WiFi comfort control as thermostat (OTBus communication), allowing the most advanced functions Possibility of intubating flues with the special flue in PP ø50, ø60 and ø80 Polyphosphate dosing filter and compact magnetic filter available as accessories Hybrid Ready: Mynute E can be integrated into Beretta multi-energy systems through the Rec 10H Hybrid and the Connect Hybrids, available as accessories CONNECTIVITY WITH BeSMART (wi-fi optional) MYNUTE E is equipped with a control panel that stands out for its ease of use. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the MYNUTE E functions. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE E FUNCTIONS MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC ACCESSORIES PREHEAT PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION ! Built-in unit is purchased separately. Technical features Model : ecoINWALL Plus Product code : 0010017154 Energy efficiency class in heating: A Sanitary energy efficiency class: A Performance Stars : ★★★★ Heating power : 5.2 kW ~ 25.1 kW DHW power : 5.2 kW ~ 25.6 kW Domestic hot water production (ΔT = 30K) 12.1 l/min DHW temperature adjustment : 35°C ~ 60°C Domestic hot water comfort stars : ★★★ Expansion vessel capacity: 8 litres NOx class : 5 Degree of protection : IPX5D Power supply: LPG Optional accessories Built-in box 0010030848 Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 845x515x234 mm Empty weight: 35.5 kg Warranty extension to 7 years Wall-mounted built-in condensing boiler Vaillant ecoINWALL plus VMW So discreet that it disappears into the wall ecoINWALL plus VMW is a 26 kW wall-mounted built-in boiler for domestic heating and the production of domestic hot water. With the combination of the convenient built-in feature, it allows for wall-mounted installation that is completely hidden in the wall in just 25 centimetres With this solution, Vaillant responds to the needs of residential construction: limited spaces inside homes and aesthetic constraints that prevent the installation of visible boilers on balconies and terraces. Being dedicated to the outside of the building, the boiler is equipped as standard with protection against frost down to -15°C. From the display of the specific remote control, the user is able to carry out the operations of control, regulation and signaling of any anomalies, remaining comfortably inside the house. Thanks to the pre-heating system and the NTC probes which monitor and prevent sudden changes in temperature, the boiler guarantees maximum comfort in domestic hot water and heating. The new modulating pump and the new stainless steel exchanger ensure great savings on electricity and gas consumption. Furthermore, combined with the multiMATIC 700 control unit, it allows to refine the thermoregulation and further reduce management costs. ecoINWALL is not only the smart answer for modern installations, but a concentration of performance, savings and technology that does not require any space inside the home. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoINWALL plus VMW The built-in solution, in the combined version Frost protection up to -15°C and IPX5D High DHW comfort thanks to settable pre-heating Exchanger in stainless steel Modulation 1:5 8 liter expansion tank Vertical hydraulic connections Simplicity in replacing standard balcony boilers thanks to a complete range of accessories Automatic system loading function Thermoregulation with standard remote control inside the house Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION! The built-in unit is purchased separately. Technical Features Model : ecoINWALL Plus Product code : 0010017154 Energy efficiency class in heating: A Energy efficiency class in sanitary ware: A Performance Stars: ★★★★ Heating power: 5.2 kW ~ 25.1 kW Sanitary power: 5.2 kW ~ 25.6 kW Domestic hot water production (ΔT = 30K) 12.1 l/min ACS temperature regulation: 35°C ~ 60°C Hot water comfort stars: ★★★ Expansion vessel capacity: 8 litres NOx class : 5 Degree of protection: IPX5D Power supply: Methane Optional accessories Built-in box 0010030848 Installation data Flue gas connection diameter: 60/100 mm Possible diameter of exhaust gas outlets: 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic pipe diameter: 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 845x515x234 mm Empty weight: 35.5 kg Warranty extension to 7 years Vaillant ecoINWALL plus VMW built-in condensing wall-mounted boiler So discreet that it disappears into the wall ecoINWALL plus VMW is a 26 kW built-in wall-mounted boiler for domestic heating and domestic hot water production. With the combination of the convenient built-in, it allows for wall installation that disappears completely into the wall in just 25 centimetres. With this solution Vaillant responds to the needs of residential construction: limited space inside homes and aesthetic constraints that prevent the installation of exposed boilers on balconies and terraces. Since it is dedicated to the outside of the building, the boiler is equipped as standard with frost protection up to -15°C. From the display of the dedicated remote control, the user is able to carry out control, adjustment and reporting of any anomalies, remaining comfortably inside the home. Thanks to the pre-heating system and the NTC probes that monitor and prevent temperature changes, the boiler guarantees maximum comfort in domestic hot water and heating. The new modulating pump and the new stainless steel exchanger ensure great savings on electricity and gas consumption. Furthermore, combined with the multiMATIC 700 control unit, it allows you to refine the thermoregulation and further reduce management costs. ecoINWALL is not only the intelligent answer for modern installations, but a concentrate of performance, savings and technology that does not require any space inside homes. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. ecoINWALL plus VMW The built-in solution, in the combined version Frost protection up to -15°C and IPX5D High sanitary comfort thanks to adjustable preheating Stainless steel exchanger Modulation 1:5 8 litre expansion vessel Vertical hydraulic connections Simplicity in replacing standard balcony boilers thanks to a complete range of accessories Automatic system loading function Thermoregulation with remote control as standard inside the home Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features: Heating energy efficiency Class A; Sanitary energy efficiency profile XL Class A; Nominal heat input 25 kW; Nominal thermal power 6 kW; Power: 125W; Expansion capacity: 8 l; Quantity of hot water with Δt=25°C: 14 l/min; flow rate sanitary water: 2 l/min; Sanitary water temperature: 35 - 60°C; Power supply: Methane NOx class 5; Max temperature pressure /°C3/90 bar; Pressure (min./max.): -/8 bar; Boiler capacity: 45 l; Pump: from max system to flow rate mbar /lt/h 375 / 1000; Smoke exhaust kit; General characteristics Effective and Safe The boiler is made up of control systems for the presence of the flame, the correct emission of fumes, temperatures and pressures. It is also equipped with a circulator and a three-way valve with anti-blocking cycles which guarantee correct operation. The boiler allows climatic regulation, which can be activated via the external probe set up for connection to the Beretta remote control panel (optional) which allows you to easily check and check the status of the appliance. High technology Mynute Boiler Green, thanks to the stainless steel kettle, is able to dispense a lot of hot water. The accumulation is equipped with a magnesium anode to offer protection against stray currents and, thanks to the wide flange, the boiler is easily inspectable. To reduce gas consumption, protective insulation is used which prevents the water from cooling down, minimizing the need to ignite the burner to bring the storage back up to temperature. Mynute Boiler Green also offers a standard DHW expansion vessel and is equipped with a predisposition for DHW recirculation (via optional kit). Thanks to the display on the dashboard, information on the status of the appliance is immediately available. Filling the system is easy to do through the appropriate tap.  The new Mynute Boiler Green is equipped with a simple control panel. Composed Two knobs that allow you to select all the functions necessary for using the boiler. The heating knob also allows activation of the Amico Climate System. FRIENDLY CLIMATE system: And the function that manages according to the external climatic situation, regulates the temperature inside the house, in fact it is active only when the delivery temperature in heating mode is set between 55 and 65 °C, in fact it automatically increases by 5 ° C every 20 minutes if heat is required. Dimensions (HxWxD): 950x600x450mm; 61kg

Read more less

ATTENTION THE PRODUCT IS MADE TO ORDER Chaffoteaux c EU condensing boiler Methane Low NOx code 3300726 Complete with flue gas exhaust kit Technical Features Model : Pharos Zelios EU 25 Reference Code: 3300726 Maximum Heating Power: 21.5 kW Maximum Thermal Power in Sanitary: 25.3 kW Energy Efficiency Class: A ACS Declared Load Profile: XXL Nominal Heat Output in Heating: 2.5 / 22.0 kW Nominal Thermal Capacity in Sanitary: 26.0 / 2.5 kW Combustion efficiency: 97.8% Stars Performance: **** Sound Power Level: 50 dB Residual Evacuation Prevalence: 104 Pa NOx class : 5 Smoke Temperature: 62° C CO2 content: 9.3% Maximum smoke flow rate: 41.6 Kg/h Expansion vessel capacity: 12 litres Heating Temperature: 36° / 60° C Kettle capacity: 180 l/min How much Instant Hot Water : 26.9 l/min Sanitary Water Pressure: 0.3 / 7 bar Power Voltage and Frequency (V,Hz) : 230 / 50 Electrical Power Consumption: 165 W Power supply: Methane Dimensions and Weight: Dimensions (HxWxD): 2000 x 600 x 660 mm Weight: 155 Kg Pharos Zelios EU Floor-standing condensing boiler with integrated storage and solar management Pharos Zelios EU combines the performance of two cutting-edge technologies, condensation and solar thermal, to ensure maximum energy savings every day. Pharos Zelios EU is the ideal answer for combined solutions with solar systems or different heating zones both in new buildings and to replace old floor-standing boilers. Equipped with Expert Control system manager as standard • Heating • Domestic Hot Water • Single Family Home Medium Protocol • Ebus2 communication • Individual Apartment • Replacement • Renovation   Compact​ Minimum footprint: 60 cm wide and less than 0.4 m2 of occupied surface Efficient Solar hot water production that covers 50 to 65% of needs, depending on the area. Climate control combined with a modulating ACS pump optimises the condensation phenomenon, ensuring additional savings. Health Comfort A 180 litre stratified storage tank and coil heat exchange surface area: 1.5 m². 3 stars of health comfort, the maximum level foreseen by the EN 13203 standard. Up to 43.9 l/min of domestic hot water flow rate thanks to the combined performance of the boiler, solar energy and the 180-litre stratified storage tank Ease of Use and Installation Quick installation thanks to the Plug&Burn solution: boiler, storage tank and accessories for solar thermal management are integrated inside the product. System manager "Expert Control" as standard: allows complete management of solar thermal, display and regulation of all parameters. Solar probe as standard. All components for managing the solar system are integrated into the product (high-efficiency modulating solar pump, flow meter, safety valve, 18-litre expansion vessel and pressure gauge). Ready for integration into a heating system via the new Ebus2 communication protocol (boiler, solar, system management modules up to 3 circuits with different temperatures and modulating thermoregulation accessories) Energy Saving and Respect for the Environment Up to 23% energy savings in combination with the room sensor and the SRA function. 40% reduction in CO2 emissions compared to a traditional heating system. Product Warranty: All products for sale on our site are new and packaged. The warranty on this item is 24 months from the date of purchase.

Read more less

AVAILABLE TO ORDER HERMANN SAUNIER DUVAL SPAZIO 4 CONDENSING 26 kW METHANE COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Model: ErP efficiency class in heating/DHW: A Sanitary load profile: XL Type: Heating and domestic hot water Combustion chamber: sealed Domestic hot water production technology: Aquaspeed® Heating Nominal power P min/max heating 80/60 °C: kW 5.4/19.1 Partial load efficiency 30% 40/30 °C %: 108.3 Sanitary Rated power min/max (60 °C): kW 5.8/27.2 Specific flow rate (∆T=25 K): l/min 15 Continuous flow rate (∆T=30 K): l/min 12 Min/max DHW temperature: 35/60 °C Electrical characteristics Total absorbed electric power: W 94 Supply voltage/frequency: V/Hz 230/50 Dimensions: Dimensions (h x w x d): 850 x 520 x 240 mm CNG code (G20) - 10017160 METHANE version SPACE 4 CONDENSING The ecological and high-performance Spazio 4 Condensing boilers meet the highest standards in terms of efficiency and comfort, thanks to the exclusive Aquaspeed® technology for the production of domestic hot water. The range includes a 26 kW combined model and a 26 kW heating only model. It stands out for the optimization of spaces, thanks to the external installation, and for the containment of energy consumption. Characteristics Energy classification 4 stars **** (92/42/EEC) with yields up to 109.2%; Sanitary comfort 3 stars *** (EN 13203-1), thanks to the Aquaspeed® system which guarantees the immediate delivery of domestic hot water at the desired temperature. The boiler is installed outside, and is controlled completely and comfortably from inside thanks to the standard remote timer control: the user is not required to perform any intervention directly on the boiler Solar Easy: all models in the range can be combined with solar systems, thanks to special kits. The compact size (only 24cm deep) minimizes clutter on balconies Continuous domestic hot water (DHW) production up to 15 l/min (Kombi models) Low NOx emissions - class 5 (EN 483) Total premix burner and primary heat exchanger in anti-corrosion stainless steel High efficiency and modulating circulator Heating and DHW antifreeze protection -5 °C (standard) and -15°C with optional antifreeze kit Standard weekly timer control: user interface with remote control Automatic filling of the system Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Kytek COMETA 28/33 kW condensing boiler with free flue gas kit Methane or LPG NOx 5 Technical features Model : COMET Maximum thermal power (Pn) (80/60 °C) 28 Maximum working pressure 3 bar Maximum domestic hot water potential 34.9 kw Maximum domestic hot water flow rate (?t: 30°C) 16.8 Power supply 230V +%10; -%15V AC-50Hz Dimensions (Height x Width x Depth) 725 x 420 x 288 mm NOx class 5 KYTEK COMET Large hot water production Modulation 1:10 Adaptive gas valve High insulation Inverter circulator Hydraulic group in brass Control Panel LCD display Water pressure switch Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMI 26 CS/1-5 Article code : 0010025186 Power supply: methane or LPG Forced draft sealed chamber Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 16.5 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 97.7% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 20-litre stratified kettle Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x546 mm Weight : 43.3Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMI Unrivaled sanitary comfort with an integrated storage tank Always ecoTEC plus but with an extra hot water reserve The new ecoTEC plus VMI has been renewed to achieve a higher level of efficiency, always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The system consisting of a boiler with storage tank is simple to assemble : the first step is the installation of the actoSTOR CL wall-mounted storage tank equipped with the relative pipes supplied for domestic water, then the ecoTEC plus VMW wall-mounted boiler is hung on the storage tank . All the necessary material is available within the same packaging. The actoSTOR CL stratification storage tank guarantees the same performance as a 60-litre coil storage tank but with considerably smaller spaces . It is possible, via a parameter in the electronics, to exclude the functionality of the boiler by making the boiler work instantaneously, guaranteeing savings on gas consumption The most significant development of the product is the IoniDetect fuel gas detection system which, in combination with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology allows you to use the boiler with a mixture of gas containing up to 20% hydrogen The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, technician or user. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMI The perfect solution for heating and domestic hot water The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Boiler with integrated 20-litre storage tank A new additional 26 kW size is also available High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMW 26 CS/1-5 CFI Article code : 0010022021 Power supply: methane or LPG Performance Heating power : 3.0 ~ 25.0 kW DHW power : 3.0 ~ 26.0 kW Withdrawal flow rate (ΔT = 30K) : 12.6 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 103.4% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 Expansion vessel: 10 litres Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x348 mm Weight : 34.0 Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMW Always ecoTEC plus but with an extra hot water reserve The new VMW ecoTEC plus has been renewed to achieve a higher level of efficiency. Etas efficiency equal to 94% , always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart, they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The most important development of this product is the IoniDetect fuel gas detection system which, combined with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology also allows the boiler to be used with a gas mixture containing up to 20% hydrogen . The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The boiler with its renewed and exclusive flat design is also available with dedicated packages, equipped with the vSMART connected thermostat, able to guarantee remote use via the free App to provide the best user experience. The boiler combined with a class VI thermoregulation such as vSmart, reaches a system efficiency of 98% and therefore the ErP energy class in heating A+ The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new "talking messages", allow easier interaction between the boiler, the technician or the user First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMW The perfect solution for heating and domestic hot water New Soaping function: no more showers with unwanted temperature changes The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Package available with vSMART for adjustments directly from your app High modulation 1:9 Discover perfect comfort with the vSMART Wi-Fi modulating thermostat Vaillant vSMART is the advanced Wi-Fi thermoregulation system that allows you to configure the comfort of your home at any time with a simple click from your smartphone or tablet thanks to a dedicated app already available for iOS and Android In fact, with the Wi-Fi modulating thermostat you can turn your smartphone or tablet into a remote control system and manage your heating system even remotely. Furthermore, using the Wi-Fi network you can quickly and extremely intuitively control and adjust the comfort of your home wherever you are vSMART is designed to ensure comfort and extreme simplicity of use and can be installed on the wall by connecting it to the mains or placed where you prefer using ordinary AAA batteries. The thermostat communicates with the boiler via the Vaillant eBus protocol . With an elegant and essential design, it integrates perfectly into any environment, allowing you to adjust your single system with a simple click and possibly the load of a domestic hot water tank. The benefits of vSMART are not limited to convenience. By using this product you will be able to drastically reduce the " start/stop " cycles of the boiler thus allowing you to save on gas and electricity and to extend the life of your appliance. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Technical features Model : Victrix Zeus Superior 25 Product code : 3.030900 Energy class in heating: A Sanitary energy class: A Load prifle : XL Maximum nominal heat input in DHW: 25.9 kW Maximum nominal heat input in heating mode: 20.8 kW Minimum nominal heat input in DHW: 4.9 kW Minimum nominal heat input in heating mode: 2.5 kW Maximum useful thermal power in DHW: 25 kW Maximum useful thermal power in heating: 20.2 kW Minimum useful thermal power in DHW: 4.7 kW Minimum useful thermal power in heating: 2.3 kW Useful thermal efficiency at 100% Pn (80 / 60 °C) : 97% Useful thermal efficiency at 30% of the nominal load. (80 / 60 °C) : 102.3% Useful thermal efficiency at 100% Pn (40 / 30 °C): 107.1% Useful thermal efficiency at 30% of the nominal load. (40 / 30 °C) : 109.9% Minimum gas flow rate to the burner: 0.26 m 3 /h Maximum gas flow rate to the burner: 2.74 m 3 /h Weighted CO : 15 mg/kWh Weighted NO X : 21 mg/kWh Power supply: methane / LPG NO x class : 6 Minimum suction/exhaust head available: 2 Pa Maximum suction/exhaust available head: 151 Pa Nominal heating expansion vessel capacity: 8 litres Electrical protection degree : IPX5D Dimensions and weight Dimensions (HxWxD): 900x600x460 mm Empty weight: 63.9 kg Immergas Victrix Zeus Superior Murali condensing with 54 liter stainless steel boiler New design, hi-tech electronic card, hydraulic performance and excellent comfort in new homes and replacements with the 54 liter boiler. The new VICTRIX ZEUS SUPERIOR condensing boilers have powers of 25, 30 and 35 kW, a very wide modulation range ( from 10% to 100% of the power ) to raise efficiency, low consumption circulator and condensing module with coil large section to reduce the risk of clogging The ecological class of the VICTRIX ZEUS SUPERIOR is 6 : the best for low harmful emissions (CO and NOx). All models can discharge fumes from the wall and the standard clapper allows combination with positive pressure collective fume evacuation systems . The latest generation electronic card allows the management of up to 3 zones from the dashboard , the commands are carried out with the comfortable knobs and the large backlit touch key display VICTRIX ZEUS SUPERIOR can also be installed outdoors in protected places and are supplied with a single product code because they work with methane, LPG or propane air. The hydraulic connections are identical to the previous models and the connection group is standard to facilitate installers in replacements VICTRIX ZEUS SUPERIOR can achieve a higher energy classification, if combined with an advanced Immergas thermoregulator such as the SMARTECH PLUS or the CAR V2 SMARTECH PLUS Control boilers remotely and save money The SMART hi-tech wireless chronothermostat with Bluetooth technology allows you to adjust the heating temperature even with a smartphone using a dedicated app . The switching on or off of the heating can be based, through a special function, on the geolocation of family members : the app raises the temperature when a member of the family returns home and lowers it when the last one leaves. With the app you can manage up to 18 SMART thermostats even in different homes SMARTECH PLUS is easy to use and reads well from any angle thanks to the e-ink technology used in digital readers. It is also compatible, for some functions, with the virtual assistants Alexa and Google Home The advantages of SMARTECH Modulating regulation of the heating in time slots with the display or remotely with the dedicated app (internet connection or Wi-Fi required) Switching on and off at time slots or with the geolocation of family members on the app Switching on and off at time slots or with the geolocation of family members on the app Very low consumption: it runs on batteries with an autonomy of up to more than 2 years High legibility with e-ink display Control up to 18 SMART thermostats in different homes, via app 54-litre stainless steel boiler The stainless steel guarantees the inalterability of the boiler to the action of the water and the wide flange optimizes cleaning and maintenance operations. Inside the boiler there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange Multiple withdrawals of domestic hot water The capacity of the stainless steel boiler, combined with the excellent temperature regulation, have made it possible to obtain the marking, i.e. maximum sanitary performance, guaranteeing high comfort even with simultaneous withdrawals of domestic hot water. Sanitary expansion tank as standard Approved for outdoors Thanks to the new insulation that equips the stainless steel boiler and the standard protection down to 0 °C, the VICTRIX ZEUS SUPERIOR boilers can be installed outdoors in a partially protected place. With an appropriate optional kit it is possible to extend it down to -15 °C (in the presence of electricity and gas). The degree of electrical insulation is IPX5D Formula Comfort 10 It benefits from the most comprehensive maintenance program lasting 10 years with no activation costs , with the possibility of extending it up to 15 years . In collaboration with the Immergas Authorized Service Centre, it can be activated during the initial check Primary exchanger in stainless steel The primary exchanger that equips the VICTRIX ZEUS SUPERIOR is made with a single-tube exchange coil in stainless steel . The absence of collectors and circuits in parallel guarantees maximum reliability over time : there are no weldings. The single stainless steel spiral without bottlenecks allows for a perfectly balanced hydraulic circuit, considerably reducing pressure drops . The internal section, wide and constant , allows to limit deposits, reducing the risk of clogging in the case of impurities present in the water (for example in the case of replacing boilers on outdated systems). Due to this peculiarity, the VICTRIX ZEUS SUPERIOR are ideal for replacement New and elegant design, Hi-Tech electronics Equipped with dashboard closing hatch and large display that is always in view, backlit touch keys and comfortable knobs for making adjustments. The display is well lit and legible and the touch keys have excellent tactile feedback , in line with the high quality level of the product. In addition to the illumination of the keys, the card is equipped with an acoustic signal capable of highlighting the commands implemented by the user on the buttons The hi-tech electronics make numerous new functions available such as for example the possibility of managing 3 zones directly from the boiler dashboard or the convenience of setting 4 comfort time slots and 4 calendars, for programming the system zones and DHW The evolution in thermoregulation Systems with multiple zones Equipped as standard with latest generation electronics, it is possible to manage 3 zones with the aid of wireless ambient probes and concentrator (both optional). The ambient temperatures and the operating time slots are set directly from the boiler dashboard or remotely via the app (from a telephone, tablet or PC) with the aid of the optional DOMINUS interface kit . It is also possible to interface with home automation management systems with KONNEX X protocol (not supplied by Immergas) In particularly large detached villas, the management of the system can be entrusted to the DIM ErP system circuit breaker kit . The lower casing of the boiler is designed for fixing both the ambient probe concentrator and the DOMINUS interface card, making it easier for the installer to assemble the kits Single-zone systems These applications can be managed in a simple way through the SMARTECH PLUS or with the or with the CAR V2 , both optional. "Green series" plug-in flue The VICTRIX ZEUS SUPERIOR have a dedicated series of air intake/fume exhaust kits made in such a way as to guarantee high resistance to corrosion and considerable speed and functionality during installation, thanks also to the coupling system and gaskets seal in special material. VICTRIX ZEUS SUPERIOR boilers can be installed in sealed chamber and forced draft or open chamber and forced draft configuration Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less