optional box Savio Edilia HE 25 built-in LPG condensing boiler complete with low NOx flue exhaust kit Cassone Optional Model: Edilia HE LPG product code 10302.1024.1 Energy class A ErP specifications Heating/DHW nominal heat input 21.0 / 26.0 kW Heating/DHW maximum useful power 60°/80°C * 20.3 / 25.1 kW Energy Efficiency ★★★★ NOx class 6 Minimum/maximum heating pressure bar 0.3 / 3.0 Minimum/maximum DHW pressure bar 0.3 / 10.0 Degree of protection n° IPX5D Height x Width x Depth mm 1200x600x240 EDILIA Edilia HE is the new Savio range of built-in condensing boilers . Excellent performance and high yields that last over time thanks to the innovative heat exchanger. Ease of use thanks to the digital control panel with display designed to communicate with the user easily and comfortably. Available in versions for heating and domestic hot water production Edilia HE presents a complete range of powers, 20 and 35 kW combi models in the same extremely compact dimensions: 1200 x 600 x 240 mm. Both versions of Edilia HE are in class A , therefore they benefit from the tax deduction according to current legislation. Main features High yields (★★★★ compliant with yield directive 92/42 EEC and Legislative Decree 311/06) Sanitary comfort (★★★ EN 13203) Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, built in stainless steel (Class NOx 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 7 l expansion vessel for mod. 25S and 10 l for mod. 35S High efficiency pump with low energy consumption Maximum power adjustable according to the system Degree of protection IPX5D Recessed installation in the wall Integration with Savio solar systems, using a solar kit Digital control panel with backlit display Analog reading of the pressure on the machine, digital on the remote Arrangement for remote control (optional) and external probe as standard High circulation single coil primary heat exchanger Savio introduces the new stainless steel heat exchanger for condensing boilers to the market: Round . Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations . Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Thermoregulation By connecting the external probe (standard) and the remote control (optional) directly to the boiler, climatic regulation can be used. Edilia HE will adapt the system water temperature to the external climatic conditions, ensuring that the desired room temperature is reached without waste and optimizing consumption . By using the climatic regulation, the regulation efficiency is also raised, giving greater value to your home . Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

SAVIO INOXDENS HE 25S* Condensing Boiler Complete With Methane Fume Exhaust Kit - NEW ErP Code 10312.0214.0 Acta Dens model Performance DHW nominal heat input kW (kcal/h) 26.0 (22356) Nominal heat input * heating kW (kcal/h) ) 21.0 (18057) Maximum useful power in heating 60/80° kW (kcal/h) 20.5 (17627) Useful power in DHW 60/80° kW (kcal/h) 25.4 (21840) Efficiency at 100% load (50/30 °C) % 106.8 Sanitary flow rate ∆t =25°K l/min 14.7 8 liter expansion vessel NOx class 6 Dimensions Dimensions HxWxD mm 703x400x325 actaDENS Acta Dens completes the Savio range with premixed condensing: perfect for radiator systems and suitable for radiant systems with mixing groups. ActaDens is the compact condensing boiler that ensures high yields, low consumption and respect for the environment. Available for heating and domestic hot water production, in power ratings of 25 and 30 kW. Main features Primary condensing exchanger in stainless steel with steel lining to offer maximum resistance to corrosion Total premix burner, stainless steel (Nox Class 6) Modulation 1:5 CNG and also LPG Sanitary plate heat exchanger in stainless steel 8 liter expansion vessel High efficiency pump with low energy consumption Can be installed in a partially protected place Integration with SAVIO solar systems, using a solar kit Analog pressure reading Arrangement for remote control and external probe High circulation single coil primary heat exchanger Savio introduces the new stainless steel heat exchanger for condensing boilers to the market: Round. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. Using a single stainless steel strip to produce the coil, including inlet / outlet connections, the following advantages are obtained: The accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange Reduction of pressure drops with optimized circuit. The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Control panel: Summer/winter/off selector Heating temperature regulator DHW temperature regulator Analog pressure reading DHW and heating temperature visualization from the display Display of fault diagnostics, block status and fault history The display operates in the following modes: INFO – information available on the operating status and error history FREE programming – programmable parameters for generator/system adjustment and User SET INSTALLER programming - generator parameters ASSISTANCE programming - Authorized Assistance Center parameters Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Caldaia Riello Family 25 KIS a condensazione completa di kit scarico fumi low NOx GPL Hybrid Ready - NOVITA   RISCALDAMENTO Portata termica nominale kW 20,00 Potenza termica nominale (80°/60°) kW 19,48 Potenza termica nominale (50°/30°) kW 21,24  SANITARIO Portata termica nominale kW 25,00 Potenza termica nominale (*) kW 26,25 Rendimento di combustione % 97,8 CATEGORIA II2H3P Tensione di alimentazione V-Hz 230-50 Grado di protezione IP X5D  ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Vaso d’espansione a membrana l 10 Dimensioni LxPxH mm 470x275x740 Classe energetica Riscaldamento/Sanitario A Family  La nuova gamma FAMILY nasce hybrid-ready, grazie all’intelligenza di sistema REC 10CH integrata nel pannello di controllo di serie. La caldaia è pertanto in grado di gestire in maniera integrata le sorgenti termiche a disposizione, senza necessità di controlli accessori. NON SERVE DECIDERE OGGICon FAMILY è possibile decidere di passare all’ibrido anche in un secondo momento, ampliando il sistema con pompe di calore, pannelli solari e bollitori/accumuli dell’offerta Riello, secondo le indicazioni a catalogo.ENERGY-SAVINGI sistemi ibridi consentono di ridurre i costi della generazione termica e le emissioni dannose in ambiente, grazie all’integrazione delle energie rinnovabili. FAMILY SI RINNOVA. IL TOP DI GAMMA DELL’OFFERTA MURALE RIELLO È IL RISULTATO DI UN NUOVO MODO DI PENSARE L’ENERGIA: EFFICIENTE, IBRIDA, GREEN. RISPETTOSA DELL’AMBIENTE PER IL MASSIMO RISPARMIO ENERGETICO, FAMILY È LA CALDAIA CHE STAVI CERCANDO, PER UN TOTALE COMFORT IN RISCALDAMENTO E IN SANITARIO. HYBRID READYFAMILY nasce hybrid ready, in grado cioè di gestire direttamente, senza necessità di accessori aggiuntivi, i componenti di un sistema multi-energia, in modo efficiente ed efficace.SCAMBIATORE IN ACCIAO INOXScambiatore primario in acciaio inox, con geometria a spira unica avvolta. Massima efficienza e affidabilità.ALTA EFFICIENZAMassimo comfort e minimi consumi, in riscaldamento ed in sanitarioSTABILITÀ DELL’ACQUA CALDA SANITARIANuovo scambiatore sanitario a piastre ottimizzato, per performance al top della categoria in termini di efficienza, stabilità della temperatura e tempi di attesa.INSTALLAZIONE SEMPLICE E VELOCECon FAMILY l’installazione e l’accesso ai componenti sono semplificati per ridurre al minimo tempo e faticaBASSE EMISSIONIFAMILY è certificata Classe 6 di NOx, la migliore prevista dagli standard europei. FAMILY è caratterizzata dal sistema di controllo di combustione elettronico evoluto, che monitora costantemente la combustione per ottenere consumi ed emissioni sempre ottimizzate.PANNELLO DI CONTROLLO CON NUOVA FUNZIONE IBRIDAGrazie all’intelligenza di sistema REC 10CH, integrata nell’elettronica della nuova FAMILY, la caldaia è in grado di gestire un sistema multi-energia, in modo semplice per l’utente e senza necessità di controlli accessori.  Garanzia Prodotto :  Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE  LA CALDAIA VIENE FORNITA A METANO. PER LA TRASFORMAZIONE A GPL, RIVOLGERSI PREVENTIVAMENTE AL SERVIZIO ASSISTENZA AUTORIZZATO Caldaia Junkers Bosch Condens 4300 W GC4300W 24/30 C 23 a condensazione con di kit scarico fumi Caratteristiche Tecniche Dati del prodotto per il consumo energetico (ErP), secondo requisiti dei regolamenti UE n. 811/2013 e 812/2013 e s.m.i. a completamento della direttiva 2017/1369/UE C4300i W 24/25 Classe di efficienza energetica di riscaldamento (A+++ → D) A Classe di efficienza energetica di riscaldamento dell’acqua (A+ → F) A - Potenza termica nominale kW 24 Profilo di carico dichiarato XL - Efficienza energetica stagionale del riscaldamento d’ambiente ηs* % 94 Dati tecnici Portata termica nominale (Qn) di riscaldamento kW 3,2-24,6 Potenza termica nominale (Pn) 80/60 °C kW 3-24 Potenza termica nominale (Pcond) 50/30 °C kW 3,3-24,7 Portata termica nominale massima acqua calda sanitaria (Qn,maxWW) kW 30,6 Portata specifica secondo EN 13203-1/2 (ΔT = 30 K) l/min 14.3 Rendimento utile alla potenza massima ηu,Hi,100% 50/30 °C % 103,1 Rendimento utile alla potenza massima ηu,Hi,100% 80/60 °C % 97,6 Rendimento utile alla potenza minima ηu,Hi,30% 50/30 °C % 107,5 Rendimento utile alla potenza minima ηu,Hi,30% 80/60 °C % 98 Capacità vaso espansione riscaldamento l 6 Classe NOx (secondo EN 15502/1) 6 Grado di protezione elettrica IP X5D Potenza sonora dB(A) 45 Peso kg 35,25 Dimensioni (LxAxP) mm 400x710x300 Condens 4300 W Un’installazione così semplice non l’hai mai provata prima Grazie ai nuovi attacchi idraulici, Condens 4300i W è la caldaia a condensazione ideale per la sostituzione e l’ammodernamento di qualsiasi modello di caldaia a gas. Così, ai tuoi clienti proponi qualità ed efficienza, e tu ti assicuri un lavoro semplice e veloce. Perfetta per gli interventi di sostituzione Con nuovi attacchi idraulici che distano ben 11 cm dal muro, Condens 4300i W è la scelta ideale in casodi ristrutturazione e per completare i lavori di sostituzione in tutta semplicità e in poco tempo. Inoltre, questa caldaia non necessita dello spostamento dello scarico fumi, perché è possibile mantenere il foro pre-esistente. L’ampia gamma di modelli di scarico fumi Bosch, disponibile in diverse lunghezze, consente di scegliere anche il nuovo scarico fumi con sdoppiatore compatto (disponibile come accessorio).Trova spazio in ogni contestoCondens 4300i W è pensata per trovare spazio ovunque e adattarsi a diversi contesti abitativi, risultando ancora una volta la scelta ideale per i lavori di ammodernamento. Le sue dimensioni estremamente compatte (con soli 30 cm di profondità, 40 cm di larghezza e 71 cm di altezza) fanno sì che possa trovare spazio in ogni ambiente domestico, anche all’interno dei pensili. Il peso estremamente contenuto, con soli 35 chili, ne conferma ancora una volta la grande praticità di installazione.Altamente efficiente, estremamente silenziosaSemplicità di installazione, dimensioni compattem e peso contenuto: cosa chiedere di più? Condens 4300i W è la soluzione perfetta anche per la sua grande silenziosità di funzionamento, per cui la sua presenza passa praticamente inosservata! Con una potenza sonora di 45 dB(A), Condens 4300i W c’è, funziona alla perfezione, ma non si sente!  Modernità e robustezza, la scelta ideale per le ristrutturazioniCondens 4300i W è funzionale e moderna sotto ogni aspetto, sia a prima vista che al suo interno. Componenti di alta qualità, design elegante e affidabilità nel tempo, uniti alla semplicità di installazione, la rendono la scelta ideale per i progetti di ammodernamento in ogni tipo di abitazione I principali vantaggi Nuovi attacchi idraulici distanti 11 cm dal muro Possibilità di mantenere il foro esistente dello scarico fumi Dimensioni ultra compatte e peso contenuto Elevata efficienza garantita dall’ampio range di modulazione fino a 1:10 Comfort sanitario a 3 stelle, il massimo ottenibile secondo la normativa EN13203-1/2 Elevata silenziosità di funzionamento con soli 45 dB(A) di potenza sonora Controllabile tramite display LCD o da remoto tramite app Consente di accedere agli incentivi fiscali previsti per l’efficientamento dell’impianto di riscaldamento Il riscaldamento domestico a portata di manoCondens 4300i W è facile da controllare tramite l’intuitivo display LCD, ma non solo: grazie alla compatibilità con un’ampia gamma di regolazioni, gestire questa caldaia è semplicissimo! Un’ampia gamma di regolazioni per incrementare l’efficienza energeticaCondens 4300i W dispone di un display LCD che consente all’utente di regolare con facilità tutte le impostazioni di base della caldaia. Inoltre è compatibile con un’ampia gamma di termoregolazioni.Questo consente di: mantenere la regolazione pre-esistente sostituire la vecchia regolazione con un modello Bosch abbinato ad una sonda esterna, in modo da incrementare l’efficienza energetica del sistema di riscaldamento e ridurre i consumi. La scelta della regolazione impatta sugli incentivi fiscali a cui è possibile accedere. Consumi ridotti e prestazioni al top: installa solo il meglio! Condens 4300i W, grazie all’ampio range di modulazione e all’elevato rendimento stagionale, è sinonimo di efficienza energetica e consumi ridotti. Così, non solo il tuo lavoro è subito fatto, ma sei certo di aver offerto ai tuoi clienti solo il meglio della tecnologia Bosch! Comfort domestico sempre al topIl bruciatore modulante di Condens 4300i W, con range fino a 1:10, si adatta in automatico al reale bisogno di calore del momento, raggiungendo un’elevata efficienza stagionale per il riscaldamento d’ambiente con valori fino al 94%. Questo, per il cliente, si traduce non solo in un elevato comfort domestico, ma anche in consumi ridotti e costi di riscaldamento più contenuti.Acqua calda sanitaria subito disponibileL’elevata efficienza di Condens 4300i W è anche garanzia di tanta acqua calda sanitaria a temperatura costante con tempi di attesa davvero ridotti. Così, con un comfort sanitario a 3 stelle, il massimo ottenibile secondo la normativa EN13203-1/2, la soddisfazione desl cliente è garantita! Garanzia Prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE  IL PRODOTTO È NUOVO E FUNZIONANTE, MA PRESENTA AMMACCATURE SUI PANNELLI LATERALI E L'IMBALLO È USURATO (PER MAGGIORI INFORMAZIONI SUI DANNEGGIAMENTI VISUALIZZA LE FOTO ACCANTO ALL'IMMAGINE PRINCIPALE). Caldaia MURALE Riello START 30 Kis LOW NOx a condensazione cod. 20187407 completa di kit scarico fumi Metano Classe di efficienza stagionale del riscaldamento d'ambiente A Classe di efficienza energetica di riscaldamento dell'acqua- A Potenza nominale P nominale kW 19 Efficienza energetica stagionale del riscaldamento d'ambiente % 93 RISCALDAMENTO Portata termica nominale :kW 20,00 Potenza termica nominale (80÷60 °C) kW 24,38 Potenza termica nominale (50÷30 °C) kW 26,78 Portata termica ridotta : kW 3,95 Potenza termica ridotta (80÷60 °C) kW 3,79 Potenza termica ridotta (50÷30 °C) kW 4,09  SANITARIO Portata termica nominale kW 30,00 Potenza termica nominale kW 30,00 Portata termica ridotta kW 3,95 Potenza termica ridotta (*) kW 3,95 RENDIMENTI Rendimento utile Pn max-Pn min (80°-60°) % 97,5 - 96,0 Rendimento utile Pn max-Pn min (50°-30°) % 107,1 - 103,6 Rendimento utile 30 % (ritorno 30°C) % 108,8 Rendimento a P media Range Rated (80°-60°) % - 97,3 Rendimento a P media Range Rated 30% (30° ritorno) % - 109,0 Rendimento di combustione % 97,7 Perdite al camino con bruciatore acceso (Pn max) % 2,3 Perdite al camino con bruciatore spento % 0,08 Perdite al mantello con bruciatore acceso (Pn max) % 0,2 SCARICO FUMI Classe Nox - UNI EN 15502: 6 Prevalenza residua tubi concentrici 0,85 m ø 60-100 mm Pa : 60 Prevalenza residua tubi separati 0,5 m ø 80 mm Pa : 190 Prevalenza residua caldaia senza tubi e senza flangia Pa 196 CARATTERISTICHE ELETTRICHE Potenza elettrica (Pel max risc.- Pel max san.) W 85 - 102 Potenza elettrica circolatore (1000 l/h) W 42 Tensione di alimentazione V - Hz 230-50 Grado di protezione IP X5D ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Pressione minima per il funzionamento standard bar 0,25 Temperatura massima °C 90 Pompa: prevalenza max disponibile all'impianto mbar 408 alla portata di l/h 1000 Vaso di espansione a membrana l 8  Precarica vaso di espansione bar 1 ESERCIZIO SANITARIO - VERSIONE ISTANTANEA Pressione massima bar - 8 Pressione minima bar - 0,5 Quantità di acqua calda con ?t 25°C l/min - 17,2 con ?deltat 30°C l/min 14,3 con deltat 35°C l/min - 12,3 Portata minima acqua sanitaria l/min - 2 Campo di selezione della temperatura H2O san. °C - 37/60 Regolatore di flusso l/min – 12 Nuova Start START è la nuova proposta, completamente rinnovata dal punto di vista tecnologico e funzionale, di caldaie a condenazione Riello per utenze domestiche di piccole e medie dimensioni. START è disponibile in 3 taglie 15, 25, 30 kW, in versioni combinate (KIS) e solo riscaldamento (IS). Una delle caratteristiche distintive della nuova START è l’innovativo pannello comandi digitale con tasti touch progettato con una particolare attenzione alla facilità di utilizzo. Scambiatore sanitario ad alta efficienza sviluppato da Riello HMI touchscreen moderna e intuitiva, con icone rappresentative e tasti capacitivi con suono acustico “buzzer” Design moderno e lineare con copertura raccordi inferiori sotto-caldaia disponibile come accessorio per un'ottima integrazione estetica Funzioni elettroniche specifiche sanitarie: ritardo sanitario, funzione anti-pendolazione e ventilatore smart Gruppo idraulico con sequenza a standard DIN Circolatore basso consumo (IEE?0,20) 7 m ad alta prevalenza disponibile come accessorio Facilità di installazione, integrazione anche in spazi contenuti e sostituzione grazie all'ampia ampia scelta di accessori disponibili come optional Rapporto di modulazione 1:8 Facile manutenzione e pulizia della camera di combustione grazie all'accesso frontale allo scambiatore – Efficienza stagionale 93% Vaso espansione laterale da 8 litri  Flangia fumi di serie con fumisteria dedicata Termoregolazione di serie in abbinamento alla sonda esterna, disponibile come accessorio Possibilità di installazione anche ad incasso (modello 25 KIS e 30 KIS) ed all'esterno in luoghi parzialmente protetti (IPX5D) Traversa di montaggio già integrata in caldaia e cavo di alimentazione elettrica a corredo Funzionamento a metano di serie con possibilità di trasformazione a GPL (G31) e aria propanata tramite accessori. Tale modifica è a cura dell'istallatore o del servizio tecnico di assistenza. Grado di protezione elettrica IPX5D. Garanzia Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

ATTENZIONE IL PRODOTTO È NUOVO E FUNZIONANTE MA PRESENTA L'IMBALLO DANNEGGIATO. Caldaia Murale Riello START 30 Kis LOW NOx a condensazione cod. 20187407 completa di kit scarico fumi Metano Classe di efficienza stagionale del riscaldamento d'ambiente A Classe di efficienza energetica di riscaldamento dell'acqua- A Potenza nominale P nominale kW 19 Efficienza energetica stagionale del riscaldamento d'ambiente % 93 RISCALDAMENTO Portata termica nominale :kW 20,00 Potenza termica nominale (80÷60 °C) kW 24,38 Potenza termica nominale (50÷30 °C) kW 26,78 Portata termica ridotta : kW 3,95 Potenza termica ridotta (80÷60 °C) kW 3,79 Potenza termica ridotta (50÷30 °C) kW 4,09  SANITARIO Portata termica nominale kW 30,00 Potenza termica nominale kW 30,00 Portata termica ridotta kW 3,95 Potenza termica ridotta (*) kW 3,95 RENDIMENTI Rendimento utile Pn max-Pn min (80°-60°) % 97,5 - 96,0 Rendimento utile Pn max-Pn min (50°-30°) % 107,1 - 103,6 Rendimento utile 30 % (ritorno 30°C) % 108,8 Rendimento a P media Range Rated (80°-60°) % - 97,3 Rendimento a P media Range Rated 30% (30° ritorno) % - 109,0 Rendimento di combustione % 97,7 Perdite al camino con bruciatore acceso (Pn max) % 2,3 Perdite al camino con bruciatore spento % 0,08 Perdite al mantello con bruciatore acceso (Pn max) % 0,2 SCARICO FUMI Classe Nox - UNI EN 15502: 6 Prevalenza residua tubi concentrici 0,85 m ø 60-100 mm Pa : 60 Prevalenza residua tubi separati 0,5 m ø 80 mm Pa : 190 Prevalenza residua caldaia senza tubi e senza flangia Pa 196 CARATTERISTICHE ELETTRICHE Potenza elettrica (Pel max risc.- Pel max san.) W 85 - 102 Potenza elettrica circolatore (1000 l/h) W 42 Tensione di alimentazione V - Hz 230-50 Grado di protezione IP X5D ESERCIZIO RISCALDAMENTO Pressione massima bar 3 Pressione minima per il funzionamento standard bar 0,25 Temperatura massima °C 90 Pompa: prevalenza max disponibile all'impianto mbar 408 alla portata di l/h 1000 Vaso di espansione a membrana l 8  Precarica vaso di espansione bar 1 ESERCIZIO SANITARIO - VERSIONE ISTANTANEA Pressione massima bar - 8 Pressione minima bar - 0,5 Quantità di acqua calda con ?t 25°C l/min - 17,2 con ?deltat 30°C l/min 14,3 con deltat 35°C l/min - 12,3 Portata minima acqua sanitaria l/min - 2 Campo di selezione della temperatura H2O san. °C - 37/60 Regolatore di flusso l/min – 12 Nuova Start START è la nuova proposta, completamente rinnovata dal punto di vista tecnologico e funzionale, di caldaie a condenazione Riello per utenze domestiche di piccole e medie dimensioni. START è disponibile in 3 taglie 15, 25, 30 kW, in versioni combinate (KIS) e solo riscaldamento (IS). Una delle caratteristiche distintive della nuova START è l’innovativo pannello comandi digitale con tasti touch progettato con una particolare attenzione alla facilità di utilizzo. Scambiatore sanitario ad alta efficienza sviluppato da Riello HMI touchscreen moderna e intuitiva, con icone rappresentative e tasti capacitivi con suono acustico “buzzer” Design moderno e lineare con copertura raccordi inferiori sotto-caldaia disponibile come accessorio per un'ottima integrazione estetica Funzioni elettroniche specifiche sanitarie: ritardo sanitario, funzione anti-pendolazione e ventilatore smart Gruppo idraulico con sequenza a standard DIN Circolatore basso consumo (IEE?0,20) 7 m ad alta prevalenza disponibile come accessorio Facilità di installazione, integrazione anche in spazi contenuti e sostituzione grazie all'ampia ampia scelta di accessori disponibili come optional Rapporto di modulazione 1:8 Facile manutenzione e pulizia della camera di combustione grazie all'accesso frontale allo scambiatore – Efficienza stagionale 93% Vaso espansione laterale da 8 litri  Flangia fumi di serie con fumisteria dedicata Termoregolazione di serie in abbinamento alla sonda esterna, disponibile come accessorio Possibilità di installazione anche ad incasso (modello 25 KIS e 30 KIS) ed all'esterno in luoghi parzialmente protetti (IPX5D) Traversa di montaggio già integrata in caldaia e cavo di alimentazione elettrica a corredo Funzionamento a metano di serie con possibilità di trasformazione a GPL (G31) e aria propanata tramite accessori. Tale modifica è a cura dell'istallatore o del servizio tecnico di assistenza. Grado di protezione elettrica IPX5D. Garanzia Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

IMMERGAS VICTRIX ZEUS SUPERIOR 26 KW LPG CONDENSING BOILER WITH BOILER COMPLETE WITH FUME EXHAUST KIT - NEW ERP Technical features Healthcare services: Useful thermal power for hot water production (kcal/h) 25.8 (22188) kW; DHW temperature °C 20 - 60: Sanitary pressure 2.5 bar: Withdrawal in continuous service (∆t 30°C) litres/min 13.1; Specific flow rate x 10 min. (∆t 30°C) litres/min 16.0; Boiler losses kW 0.174; Nominal expansion vessel capacity liters 2.0 (1.2) Power supply: LPG. Model: Wall mounted condensing boiler with 45 liter Boiler; Energy class in heating: A; Sanitary energy class: A; Sanitary load profile: XL; Heating power: 23.9 kW; DHW power: 25.8 kW; Hot water production (∆t 30 °C) l/min: 16.0 Nominal Current: 0.64A; Electrical insulation degree IP X5D; Heating performance: Nominal system expansion vessel capacity (min./max.): 10.0/7.1 L; Head available with flow rate 1000 l/h kPa (m wc) 26 (2.65); Benefits and functions: Display: backlit liquid crystal, provides the main operating information; It is possible to take advantage of the tax deductions in force; Low consumption, and can be combined as an optional with thermoregulators, which improve comfort and increase energy savings; 45 l kettle; Eco-compatible technology: in compliance with the ErP and ELD European Directives, it allows to achieve high energy efficiency classes in heating and hot water production; Ecological class 5: reduced emissions of nitrogen oxides. General characteristics Immergas boiler, easy to install in any environment and compatible with existing fittings and whirlpool tubs, designed to respect the environment while enjoying maximum comfort with low energy consumption given its low consumption circulator. Equipped with a 54-litre boiler made of stainless steel to be unalterable over time with minimal heat loss so as to resist even outdoors. The wide flange optimizes cleaning and maintenance operations, which allows excellent thermoregulation, guaranteeing very high performance in terms of comfort. Inside the boiler, in turn, there is a stainless steel coil wound in a double concentric spiral which ensures rapid heat exchange. The Zeus boiler is intuitive and simple to use and to program to your liking thanks also to the practical knobs and a backlit display that allow you to manage and view the boiler settings. Finally, given its great reliability not only in performance but also in resistance (IPX4D protection degree) it can be installed both indoors and partially covered outdoors. Dimensions (HxWxD): 900x600x460cm; Warranty The guarantee on this article is 24 months from the date of purchase.

Read more less

Condensing boiler Riello Residence Condens 25 KIS Gpl complete with flue kit cod. 20097541 Technical specifications Product code:20097541 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Firebox thermal power (heating): 25 kW Useful thermal power (sanitary): 25 kW Energy efficiency (92/42/EEC) **** Useful efficiency at Pn* (50°C-30°C): 105% Profit return 30% (47th return): 110% Sealed chamber, forced draught Quantity of hot water at ?t 25°C: 14.3 l/min Minimum domestic water flow rate: 2 l/min Dimensions (hxlxp) mm 845 x 400 x 358 ; 39 kgs Electrical protection degree: IP X5D NOx class: 5 Power supply: LPG General characteristics RESIDENCE CONDENS Yield **** Low polluting emissions Aluminum condenser, with premix burner Heating only models and combined models Residence Condens is the Riello wall-mounted condensing boiler for medium-sized users. The new primary heat exchanger completely made of aluminum with front access to the combustion chamber ensures better efficiency and durability. It is available with powers from 20 to 32 kW. Characteristics: Modulation ratio 1:8 which allows the boiler to respond to all heat requests Self-modulating circulator, low consumption (IEE≤0.20) "Winter with Pre-heating" function: allows the DHW exchanger to be kept at the right temperature, reducing waiting times during withdrawal (instantaneous combined models only) Standard thermoregulation on the card in combination with the external probe (optional) Assembly template, hydraulic fittings, power supply cable supplied Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

NB: PRODUCT ARRIVES IN MID-FEBRUARY ARISTON EGIS PREMIUM EVO EXT 25 EU CONDENSING BOILER COMPLETE WITH METHANE FUME KIT - NEW ErP Technical features Product code: 3300763 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 23.5/2.5 Max/min heating thermal power (80°C-60°C) kW 22.9/5.3 Efficiency at nominal heat input (60/80°C) % 97.5 Efficiency at nominal heat input (30/50°C) % 103.9 Efficiency at 30% at 30°C % 108.2 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 25/45 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 10.5 Quantity of hot water ∆T=25°C litres/min 13.1 Quantity of hot water ∆T=35°C litres/min 9.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 87 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 770/505/240 Extremely small dimensions to adapt to any space problem. METHANE power supply Standard: Sensys system manager with integrated time programming General characteristics Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston satisfies all the indications envisaged for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energy. Egis Premium Evo EXT EGIS Premium Evo EXT is the wall-mounted condensing boiler designed for outdoor installation. Thanks to its small size and low weight, installation is extremely simple. This without giving up the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). Simplicity and with reduced consumption thanks to the 1:4 modulation ratio and the high-efficiency circulator with continuous modulation. Operation only with methane gas Characteristics: Wall mounted condensing boiler for outdoors with auto function Sensys system manager with integrated time programming Continuous modulation high efficiency circulator Modulation ratio 1:4 Electro-galvanized casing for outdoors Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Anti-freeze, anti-limescale and anti-blocking circulator protection Aluminum isothermal primary exchanger Cold water inlet and heating return filters 60mm split exhaust Operation only with methane gas Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Overview BIASI INOVIA COND PLUS 25S CONDENSING METHANE LPG BOILER - NEW ErP, SEALED CHAMBER COMPLETE WITH FUME EXHAUST KIT: Inovia Cond Plus is the new BIASI range of wall mounted condensing boilers: excellent performance thanks to the new heat exchanger and ease of use thanks to the panel digital control with large displays. Technical specifications Model: Inovia Cond Plus 25S Energy label specifications according to the European ErPÿ directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Heating/DHW maximum useful power: 19.3/25.1ÿkWÿ Heating/DHW nominal heat input: 20/26 kW Yield name 60ø/80øC:ÿ96.7% Yield at 30% load: 107.4% High yields (in compliance with yield directive 92/42 CEE and Legislative Decree 311/06) Sanitary comfort( EN 13203)ÿ 8 liter expansion tankÿ Degrees of protection IPX5Dÿ Maximum flow rate (T=25 K) / (T=35 K): 14.4/10.3 l/minÿ Specific sanitary flow rate (T=30 K): 12.0ÿl/minÿ Dimensions hxwxd: mmÿ700 x 400 x 290; 32kg NOx class : 6 ÿMETHANEÿorÿLPG power supply Main features Inovia Cond Plus Wall mounted condensing boilersÿ Inovia Cond Plus is the new BIASI range of wall-mounted condensing boilers: excellent performance thanks to the new heat exchanger and ease of use thanks to the digital control panel with large displays. Available in the versions for heating and domestic hot water production and for heating only, Inovia Cond Plus presents a complete range of powers, 25 and 35 kW combi models and 25 and 35 SV models, in the same extremely compact dimensions (700 x 400 x 290mm). Inovia Cond Plusÿhas its strength in the innovative heat exchangerÿdesigned to provide high yields that last in the digital control panel, designed to communicate with the user in an easy and comfortable way. Like the entire BIASI condensing range, Inovia Cond Plus allows you to obtain maximum savings from climatic thermoregulation, based on the system in which the boiler is installed. High yields (complies with 92/42 EEC yield directive and Legislative Decree 311/06) Sanitary comfort (EN 13203)ÿ Primary and condensing heat exchanger in stainless steel withÿaluminium coatings to offer maximum resistance to corrosionÿ Total premix burner, built in stainless steel (Class NOx5) Sanitary plate heat exchanger in INOXÿ steel High efficiency pump with low energy consumption 8 liter expansion tankÿ Maximum power adjustable according to the systemÿ Degrees of protection IPX5Dÿ Can be installed in a partially protected placeÿ Integration with BIASI solar systems, using a solar kitÿ Innovative digital control panelÿ Digital pressure readoutÿ Arrangement for external probe remote controlÿ Possibility of managing a zone valve by remote control in multi-zone systems. High circulation primary heat exchanger Biasi produces the new Steelcoil compound exchanger with a stainless steel spiral enclosed in an aluminum shell. Thanks to the large exchange surface of the coil, greater thermal efficiency is guaranteed with a lower loss of charge and easier cleaning. The ease of cleaning and the sturdiness of this exchanger are one of the main strengths of the product which can be used on new systems but also on old systems in case of renovations. Steelcoil integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the monspira. Does the absence of parallel circuits guarantee an easy cleaning operation? of the exchanger and the elimination of any air present in the system circuit. Thermoregulationÿ By connecting the external probe and the remote control (optional) directly to the boiler, climatic regulation can be used. Inovia Cond Plus will adapt the water temperature of the system to the external climatic conditions, guaranteeing the achievement of the desired room temperature without waste and optimizing consumption. By using climatic regulation, the regulation efficiency is also increased, giving greater value to your home. All ready for Energy Labeling What is it about From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres or As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. It's about me tooÿ YES, it affects everyone: professionals and end users The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. Supplier's responsibility The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. Responsibilities of Resellersÿ First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON GENUS PREMIUM EVO CONDENSING BOILER IN 25 EU COMPLETE WITH LPG - ErP FUME KIT Technical features Product code: 3300736 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: For heating and domestic hot water production Forced draft sealed chamber Nominal heat input in heating max/min kW 22/2.5 Max/min heating thermal power (80°C-60°C) kW 21.5/2.4 Efficiency at nominal heat input (60/80°C) % 97.8 Efficiency at nominal heat input (30/50°C) % 106.2 Efficiency at 30% at 30°C % 109 Performance stars (dir. 92/42/EEC) ★★★★ Min/max heating temperature (high temperature range) °C 35/ 82 Min/max heating temperature (low temperature range)°C 20/ 45 Min operating temperature* °C -15 Specific flow rate in DHW (10 min. with ∆T=30°C) litres/min 12.2 Quantity of hot water ∆T=25°C litres/min 14.6 Quantity of hot water ∆T=35°C litres/min 10.4 Comfort performance stars (EN13203) ★★★ Supply voltage/frequency V/Hz 230 / 50 Total absorbed electric power W 78 Degrees of protection of the electrical system IP X5D Dimensions (H x W x D) mm 1140/590/240 Extremely small dimensions to adapt to any space problem. METHANE power supply Standard: Sensys system manager with integrated time programming General characteristics Ariston condensing boilers 1 condensing boiler = -737kg CO2/year 1 condensing boiler = 60 more trees Together with the heat, a traditional boiler also produces water in the vapor state, usually evacuated through the exhaust fumes. Normal boilers, since they do not treat these fumes before releasing them into the environment, therefore have a thermal efficiency based exclusively on the lower calorific value. The water vapor is not recovered in any way, thus dispersing part of the energy produced during combustion. Condensation is the physical process which, inside the boiler, transforms the water again from the vapor state to the liquid one. CLAS PREMIUM EVO, exploits the phenomenon of condensation in its favor by reusing the energy of the exhaust fumes and increases the useful calorific value, thus reaching the thermal efficiency of over 107%. Furthermore, during this process, most of the harmful combustion products for the environment and health, they are eliminated together with the condensed water. Consistent convenience The new products, using condensing technology, eliminate waste with great energy and economic savings. Thanks to the savings in the bill, less than three years are enough to amortize the higher cost of a condensing boiler. After that, the lower consumption translates into a real gain. Imagine what a reduced bill of up to 35% every year, for many years, means for your economies... Zero waste, only benefits Today Ariston combines energy savings with tax savings, offering a great opportunity to those who have chosen to replace the old boiler with a condensing one. In fact, the Finance law provides for specific tax incentives in favor of taxpayers. EVO: energy saving becomes reality, for everyone's well-being Among the measures aimed at reducing the energy consumption of buildings (European Directive 2010/30/EC), the Italian legislation has introduced "The obligation of the energy certificate of the building" in the purchase and sale of new and existing buildings. They have also been extended until throughout June 2013, bringing them to a value of 50%, the "tax credit deductions relating to building renovations and energy efficiency interventions". For the purpose of achieving the national objectives envisaged on the coverage of consumption through renewable energy sources (European Directive 2009/28/EC) it also requires and promotes "the use of heating systems operating on renewable energy". With the EVO range, Ariston responds to all the indications foreseen, for having "low energy consumption buildings", guaranteeing optimal integration with systems using renewable energies. Genus Premium Evo IN Genus Premium Evo In is the wall-mounted condensing boiler expressly designed for built-in installation. Small dimensions and reduced weight, its implementation is extremely simple. This without renouncing the safety that distinguishes Ariston, i.e. exceptional resistance to cold (up to -15°C) and electrical protection from water and dust that reaches the highest levels (IPX5D classification). High efficiency product with reduced consumption thanks to the 1:10 modulation ratio and the high efficiency circulator with continuous modulation Characteristics: Built-in condensing boiler with auto function and info top Sensys system manager with integrated time programming Continuous modulation high efficiency circulator Modulation ratio 1:10 Universal built-in unit in electro-galvanized sheet metal (to be ordered with separate code) Possibility of outdoor installation thanks to all weather protection systems. Prepared for integration in system configuration through the new Bus Bridgenet® communication protocol Arrangement for multi-zone and multi-temperature thermoregulation Arrangement for solar system management Car function and comfort External probe integrated in the boiler Semi-automatic filling Circular anti-freeze, anti-limescale and anti-blocking protection Increased sanitary exchanger Cold water inlet and heating return filters Convenience function: The Comfort function speeds up the delivery of domestic hot water, reducing waiting times down to just 5”. This service can be customized by choosing between two modes of use: COMFORT PLUS (hot water immediately ready every time the tap is opened in just 5 seconds) COMFORT (hot water ready for 30 minutes after the last withdrawal so as not to give up savings) car function: It is truly possible to combine maximum comfort with reduced consumption, thanks to the intelligent management logic of the new boilers and the new technology that governs them. By activating the AUTO function, the Ariston boiler chooses the best operating mode based on the environmental conditions, the connected external devices and the required performance. Impossible to compare this ability to interpret and respond to external stimuli with what has been achieved so far. AUTO does not fear comparisons Acoustic comfort Acoustic comfort is further guaranteed by the introduction of the new silencer. For the Genus Premium Evo EXT thanks also to the high modulation ratio 1:10, the continuously modulating pump and the presence of side sound-absorbing panels. High efficiency circulator with continuous modulation: It allows automatic adaptation of the power based on the temperature of the system, guaranteeing boiler performance and reducing electricity consumption. Optimization of thermal efficiency. Optimization of comfort with constant temperature. Maximum silence. High efficiency The condensing technology makes it possible to achieve high energy efficiency thanks to the increase in the calorific value generated by the reuse of the energy of the exhaust fumes, allowing for a higher thermal efficiency. The future of the planet and your comfort are the main objectives of Ariston condensing technology Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.  

Read more less

ATTENTION IN THE ABSENCE OF THIS PRODUCT, THE MODEL PIGMA ADVANCE EXT 25 WILL BE SUPPLIED Overview CHAFFOTEAUX PIGMA GREEN EXT Ebus2 25 EU CONDENSING BOILER Cod. 3310443, COMPLETE WITH FUME KIT - NEW ErP 2015: Condensing technology with minimum bulk and maximum installation versatility make Pigma Green Ext Ebus2 EU the best choice where living spaces are you don't want to give up comfort and savings. Technical specifications Product code: 3310443 Energy label specifications according to the European ErP directive Class A heating energy efficiency Sanitary energy efficiency Class A Withdrawal profiles: XL Characteristics of heating/sanitary exercises: Nominal heat input in heating max/min (Hi) Qn: 22/5.5 kW Useful heat output 80/60øC in heating/sanitary max/min:ÿ21.5/5.4kW Nominal heat input in sanitary(60/80øC) max/min:ÿ26/5,5 kW Efficiency at nominal heat input:ÿ97.5% Efficiency 30% of nominal heat input:ÿ109% Sanitary comfort performance starsEN13203: *** Energy efficiency stars: (dir 92/42/CEE) **** Capacity of the expansion vessel: 8 lt Port. specific in healthcare (10 min. with T= 30øC): 12.2 l/min Minimum withdrawal:ÿ<2ÿl/min Total absorbed electric power: 76 W Degrees of protection for the electrical system: IPÿX5D Dimensions hxwxd: mmÿ766x505x240ÿ; 32kg LPG fuel supply or Features list PIGMA GREEN EXT Ebus2 EU Condensing technology with minimum bulk maximum installation versatility makes Pigma Green Ext Ebus2 EU the best choice where living spaces are precious and you don't want to give up comfort and savings. Resistant to corrosion, wind and frost, it can be installed anywhere and conveniently control all functions via the standard Expert Control system manager. Pigma Green Ext Ebus2 can be perfectly integrated with solar thermal systems and modules for the management of multi-zone systems, even with different temperatures, to make any design solution simple. Sanitary comfort Increased plate heat exchanger in stainless steel. 3-star sanitary comfort, the maximum unexpected by the EN 13203 standard. 12 l/min (T= 30°C) domestic hot water flow rate, measured in compliance with standard EN 625. Sanitary circuit managed by four probes and a flowmeter, to eliminate waiting times and have a constant temperature, even in the case of small withdrawals. Perfectly integrable with thermal solar systems, forced and natural circulation Daily and weekly hourly programming of the DHW exchanger pre-heating periods directly from the Expert Control system manager. Heating comfort ÿRendimentfinal 109% with energy savingsfinal 35%. 4-star combustion efficiency according to the EN 92/42 standard. Automatic regulation system, which can be activated directly from the Remote Control, to obtain the best heating operating regime in all environmental conditions. Useful thermal power up to 23.5 kW. Modulation ratio 1:5. Reduced polluting emissions, NOx class 5. Heating circuit pressure sensor with display on Expert Control. Modulating circulatorÿ to improve acoustic comfort and reduce electricity consumption. Differentiated climatic thermoregulation of 3 circuits, according to the ambient and external temperature. Operation management and programming through the Expert Control system manager: operating modes and temperatures, self-diagnosis, daily and weekly programming, adjustment information and history of the latest faults. Convenience of installation use Semi-automatic fillings that can be activated from the Expert Control system manager. Expert Control system manager and external probe as standard. Adjustment of operating parameters directly to Expert Control system manager. Arranged for the control of 3-circuit system management modules at different temperatures. Prepared for the management and integration of thermal solar systems (standard solar probe). Electrical protection degrees IPX5D and operation guaranteed up to -15øC **. Commissioning made easier: automatic de-aeration function and combustion regulation with direct access. ERP extension From 26 September 2015 the directives of the European Commission concerning eco-design and energy labeling will apply. These two directives aim to achieve savings in one of the most polluting and most energy intensive sectors: construction For placing on the European market, the directive on ÿeco-designÿ(ErP notcome®ÿEnergy Related Productsÿ¯) imposes a minimum energy efficiency for heating devices and hot water production in domestic premises. The directive applies to: generators with a capacity of less than 400 kW water heaters with a capacity of less than 400 kW, kettles with a capacity of less than 2000 litres As in the household appliances sector, the energy labelingÿof products, with a capacity of less than 70 kW, will give consumers simple, recognizable information which allows them to make comparisonsÿon the performance and energy consumption of the product they wish to purchase. The energy label will be included in all boilers, water heaters and storage tanks placed on the market from 26 September 2015. The information indicated on the energy labelÿwill allow professionals to recommend the right productÿÿindividuals to benefit from the information available. The user will be able to easily compare the performance of the products. From 26 September 2015, the label will be present on the following products: boilers, electric water heaters, thermodynamic water heaters, solar water heaters, storage tanks, heat pumps, solar systems and control systems. The company that supplies the product on the market is required to equip its system devices with the following documentation: product energy label;ÿ product data sheet;ÿ system energy label in addition to that of the product, both if it sells a system that includes the product in question, and if this, in the future, can be sold combined with other additional devices;ÿ technical data sheet of the system with the parts relating to the products and the system already completed. First of all, it should be clarified that the reseller can be anyone who sells, rents, offers for rent/sale and exhibits a device/system to the public. Therefore, even professionals such as plumbers, installers, designers can fall into this category. All bound to ensure that: all appliances and/systems having their respective labels and making sure they are clearly visible;ÿ all appliances and/systems must always be accompanied by the obligatory technical data sheets;ÿ every type of advertising material, technical promotional material which shows energy data and price indications, contains an indication of the energy efficiency class. The new ErP regulations ENERGY LABELLING: Appliances for space heating and the production of hot water will have to be equipped with the new energy label which will report the energy class and the main performance data. The energy class must also be mentioned in the technical, commercial and advertising documentation of the appliances. ECODESIGN (ErP): The new ErP regulations impose the minimum energy efficiency that space heating and hot water production appliances must achieve in order to obtain the CE mark and be marketed in Europe. These new limits will exclude obsolete technologies from the market, significantly raising the level of energy efficiency of products. PRODUCT LABEL There are different labels depending on the type of appliance. Those with efficiency classes A, A+ and A++ certify products with the highest performance. Furthermore, two different classifications are foreseen for domestic heating and for hot water production services, so much so that mixed products must show both classifications. In addition to the energy class, the labels contain other information, so that the end customer can make his choice in the most aware way possible. SYSTEM LABEL In addition to the product label, the system label is also providedÿin cases where a series of appliances combined with each other is offered. This label must also be included in the technical and commercial documentation of the system. Those proposing such systems will have to calculate the performance using a predefined calculation algorithm and display the label so as to inform the end user in the best possible way. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less