Technical features Model BASIC AND 24A LPG OPEN ROOM Energy efficiency Class C heating energy efficiency Sanitary Energy Efficiency Class B Withdrawal profile: XL Performance Useful thermal power: 24.1 kW Energy efficiency stars: (dir 92/42/EEC) *** Maximum flow rate (Δt =25 °C): 13.8 l/min LPG power supply Characteristics High yields Primary heat exchanger in copper, high circulation lamellar Sanitary plate heat exchanger in stainless steel High efficiency pump with low energy consumption Integration with BIASI solar systems using a solar kit Traditional control panel with knobs and LEDs. Dimensions hxwxd: mm 700x400x325

Read more less

The boiler will be supplied with methane, using the appropriate kit it can be transformed for operation with LPG. Contact the local assistance center in advance. Technical features Model : atmoTEC Plus VMW 240/5-5 Product code : 0010016274 Power supply: LPG Performance Nominal thermal power in sanitary mode: 24.0 DHW nominal heat input kW 26.7 Energy efficiency class in heating: C Sanitary energy efficiency class: B Sanitary load profile : XL NOx class : 3 Performance stars : ★★ Domestic hot water production (ΔT = 30K) 11.5 l/min Domestic hot water comfort stars : ★★★ Expansion vessel capacity: 10 litres Fumes discharge temperature : 84° ~ 117°C Sound power : 49.5 dB(A) Dimensions and weight Dimensions (HxWxD): 800x338x440 mm Weight : 40.0 Kg Open flue boiler Vaillant atmoTEC Plus Standard wall mounted boiler for heating and domestic hot water Three star comfort hot water DHW pre-heating function Can be installed outdoors, protected up to -10C 10l expansion vessel High efficiency modulating pump. Energy efficiency class up to B depending on the model. For more information, see the technical data sheet The plus range was designed by Vaillant to meet all comfort needs for the production of hot water and for heating. The new atmoTEC plus series with open chamber models with natural draft features the domestic hot water pre-heating function; this function satisfies the customer's needs by reducing production times and immediately provides comfort. With a renewed design and their reduced dimensions, 80 x 44 x 34 cm, they can be placed in any room and easily housed in wall units or cover cabinets. Vaillant does not stop at the design but continues in the development and research of the best performance for the plus series obtaining exceptional results in terms of silence and ease of installation. Vaillant plus series boilers are at the top of performance in terms of efficiency, temperature constancy and low maintenance costs, thanks to the high quality of the components. A novelty in response to the ErP regulation is the introduction of a high efficiency pump (class A). Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

GAS BOILER VAILLANT AtmoTEC PRO VMW 240/5-3 METHANE OPEN CHAMBER - ErP Technical features For heating and domestic hot water production Open chamber with natural draft DHW nominal heat input kW 24 ErP energy class (heating and DHW): class C/B Performance stars (according to Dir. 92/42CEE) - *** Domestic hot water production (ΔT = 30K) 11.5 l/min Domestic hot water comfort stars (prEN 13203) - ** Expansion tank capacity: 10 l Dimensions (hxpxl) mm 800 x 338 x 440 Code: 0010016269 Version: CNG or LPG General characteristics AtmoTEC PRO Standard wall mounted boiler for heating and domestic hot water Sanitary comfort even with low flow rates Intuitive display and simplified adjustments Reduced electricity consumption Suitable for outdoor installations down to -10°C High efficiency pump. Energy efficiency class C/B The atmoTEC pro VMW (heating and DHW production) are available in powers from 24 kW. atmoTEC pro has been designed to offer the right balance between performance and comfort both in heating and in the production of domestic hot water. Its simplicity of regulation makes it the ideal boiler for all users. AtmoTEC pro is equipped with an extremely simple interface with plain text and backlit display. The reduced dimensions of atmoTEC pro VMW 80cm high, 44cm wide and 35cm deep (identical to the previous version) allow installation in any environment. A new high-efficiency pump and new electronics allow atmoTEC pro to consume very little electricity, guaranteeing considerable savings throughout the year. Ecodesign Directive (ErP) 2015 How to be ready for new EU legislation What will happen from 26 September 2015? From this date it will no longer be possible to produce traditional forced draft boilers. Instead, it will be possible to continue producing condensing boilers and traditional open chamber boilers equipped with high-efficiency pumps and compliant with the new ErP requirements such as emission, noise and efficiency levels. In particular, the installation of traditional open chamber boilers will only be possible to replace old boilers installed in multi-family buildings which discharge the fumes into branched collective flues (CCR). Products placed on the market before 09/26/2015 that do not comply with the requirements of the new directive, such as traditional forced draft boilers and boilers not equipped with a high efficiency pump, can still be purchased, sold and installed.   ErP and ELD: what do they mean and how are they different?   ErP : The EU has issued new obligations for Energy Using Products (ErP). The new directive, known as the Ecodesign directive, prescribes minimum efficiency requirements and emission limits for appliances that produce heating and domestic hot water. The Ecodesign directive is aimed at two categories of products relevant to installers and resellers in the sector: Category 1 Includes space heating appliances: electric, gas, oil, combi boilers, heat pumps and cogenerators up to 400 kW. Category 2 Includes appliances for the production of domestic hot water: electric, gas, diesel, heat pumps for DHW, solar systems up to 400 kW and boilers up to 2000 litres.   ELD: in addition to the ErP directive, the EU has also introduced mandatory energy labeling for the same type of appliances up to 70 kW and boilers up to 500 litres. The energy labeling directive is called ELD and requires that new products and systems for heating and the production of domestic hot water are labeled with an indication of their energy efficiency class. By combining the products and components, for example by adding a temperature control unit, it is possible to increase the energy classification of the system which will be calculated by the installer and indicated on the package label.   Let's take a look at the new labels...   When and how will the new rules apply?   On 26 September 2015 the new rules will come into effect. Until then, neither manufacturers, retailers or installers have to comply with the new Ecodesign or labeling provisions. Once the new rules come into effect, manufacturers will only be able to manufacture products that comply with the new Ecodesign requirements, and will be required to supply an energy label with the products     Why push condensing technology right away?   For the energy requalification of individual homes, the 2007 Budget Law was extended until 31 December 2015. The request for a 65% tax deduction concerns, for example, the replacement of a traditional boiler with a condensing boiler.     What will Vaillant support be?   7 year guarantee   The 7-year guarantee on new boilers is another excellent reason to offer Vaillant to your customers. In addition, know that by replacing a Vaillant boiler over 15 years old with a new generation one, the warranty extension will be provided free of charge by the Vaillant Official Technical Assistance Center against a maintenance contract. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

FERROLI DIVACONDENS D F24 METHANE CONDENSING GAS BOILER COMPLETE WITH FUME EXHAUST KIT-NEW ERP Technical features Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Characteristics of heating/DHW operation: Heating max heat input kW 25.8 Nominal thermal power Pn kW 24 Efficiency Pmax (80/60°C) % 96.5 Yield 30% % 103.5 Directive efficiency class 92/42 EEC **** Max heating / sanitary operating pressure. bars 3 / 9 Max heating temperature 90 °C Heating water content liters 1.5 Heating expansion tank capacity 8 litres Exp. vessel preload pressure heating bar 1 Sanitary water content 0.3 litres Sanitary flow rate ∆t 25°C l/min 14.0 Sanitary flow rate ∆t 30°C l/min 11.6 IP X5D degree of protection Electric power absorbed W 95 Extremely compact dimensions (LxHxP): mm 400x700x330; 35kg Sound power level LWA dB 57 NOx class 3 Power supply: METHANE DIVA CONDENS D DIVACONDENS D is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes. The quality of the DIVACONDENS line is unquestionable, and Ferroli is ready to put it to the test by offering its customers an extended warranty coverage with the "5 years worry-free" formula which also ensures periodic maintenance and legal checks. Range Divacondens D is available in two models for heating and instantaneous production of domestic hot water forced draft boiler and sealed chamber mod. F 24 - MAXIMUM THERMAL CAPACITY 25.0 kW mod. F 28 - MAXIMUM THERMAL CAPACITY 28.0 kW Strengths: Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels Compact geometry primary heat exchanger entirely in copper Instant production of domestic hot water with dedicated plate exchanger Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit Forced draught sealed chamber boiler, with AISI 304 stainless steel atmospheric burner Standard hydraulic by-pass High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity Can be combined with the modulating remote timer control Simple and complete control panel, display user interface, with setting keys Advantages of Divacondens D: Robust post-condenser powered by the closed circuit of the primary circuit, i.e. without the inlet of external mains water. The heat exchange with the fumes takes place inside large diameter water passages. Generator with simple and rational operation Condensate collection device to protect the air pressure switch, for regular combustion even in the presence of very cold external temperatures ECO function in DHW for greater savings in the period of low use of hot water Predisposition for solar systems: prepared for the production of domestic hot water combined with solar panel systems Place of installation: also for outdoors in a partially protected place down to -5°C as standard Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center (max total price of 30 euros + VAT) Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre. Free transformation during product verification and activation of the guarantee only if the specific code running on LPG is not available. Functions: ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The DIVACONDENS D electronic board adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite CONTROL UNIT The DIVACONDENS D control unit consists of an easy to use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. COMBINABLE WITH THE ROMEO CHRONO CONTROL: The Romeo chrono control allows control and setting of the boiler functions directly from the room in which it is installed. Comfort programming is possible on a weekly basis and also includes the 'holiday' function. Romeo is available with wired or wireless connection. The ROMEO modulating function allows boiler output to be modulated as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. FOR CONVERTING TO LPG, CONTACT THE AUTHORIZED ASSISTANCE SERVICE IN ADVANCE Junkers Bosch CONDENS 2200 W GC2200W 24/23 C 24 kW condensing boiler complete with methane or LPG fume exhaust kit class A - NEW ERP Technical features Declared load profile XL Energy efficiency class A Water heating energy efficiency class A Rated thermal power Prated kW 24 Annual energy consumption QHE GJ 49 Seasonal space heating energy efficiency ηS % 94 Water heating energy efficiency ηwh % 85 Dimensions Height (cm) :71 Width (cm) :40 Depth (cm) :30 Weight (kg): 35.00 Condensed 2200 W Condens 2200 W is the new compact and versatile wall-mounted condensing boiler for heating and domestic hot water production Maximum reliability The new Condens 2200 W boiler stands out not only for its small size, but also for its high sturdiness, guaranteed by the Al-Si WB6 aluminum alloy primary exchanger Great efficiency in a small space The compactness and versatility of the new Condens 2200 W boiler make it the ideal solution in case of replacement, because it is able to adapt to any domestic environment High performance in class A+ The new Condens 2200 W guarantees a seasonal efficiency of 94%, the maximum obtainable from a condensing boiler. If combined with a modulating thermoregulator with climatic function, it is also able to reach Class A+ Small size and new rounded design High energy savings thanks to the seasonal efficiency of 94% Ideal for replacement work Modulation range up to 1:5 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: in the absence of this product, the new model CIAO S 24 CAI LX LOW NOX will be shipped GAS BOILER BERETTA CIAO S 24 CAI METHANE OPEN CHAMBER - NEW ErP Technical features Model: HELLO S 24 CAI Code: 20096549 Heating/DHW nominal heat output: 24 kW Efficiency at nominal power: 92% Efficiency at reduced load (30%): 90.6% Quantity of hot water with Δt=25°C: 14 l/min Dimensions (hxwxd) mm 740 x 400 x 340; 30kg Heating and DHW energy efficiency class (ErP): C - B METHANE power supply Legend: C (heating + sanitary water), A (Open Room) I (electronic ignition, ionization control). HELLO S, the reliable one Innovation at the service of quality The new Ciao S, available in both the open chamber and sealed chamber versions with a thermal power of 24kW, is designed with components that belong to a high quality standard: a boiler which is therefore characterized by reliability and sturdiness. The models in the Ciao S range are compliant with Legislative Decree 311/06 HELLO S, the universal A sealed boiler for all environments The sealed chamber models are designed to be installed outdoors in partially protected places or recessed thanks to the dedicated accessories and board anti-freeze protection down to -3°C. In colder temperature conditions it is possible to extend the protection down to -10°C using the antifreeze heater kit (optional) together with the lower cover (optional). The upper cover is also available for greater protection of the appliance. The new Ciao S range also benefits from the high degree of electrical protection IPX5D. HELLO S, the elegant A modern style The new Ciao S is characterized by a particularly elegant aesthetic and is equipped with a simple and intuitive digital display which makes information on the status of the appliance immediately usable. The modern ergonomic knobs allow you to perform all the functions necessary for using the boiler. Characteristics: CAI boilers, ErP version, equipped with 6 m low consumption circulator (EEI0.20) Can also be installed externally and recessed (model CSI only) Double exchanger: primary and sanitary Double air intake (mod. CSI) Can be installed flush-mounted using special optional accessories (mod. CSI) 8 liter expansion vessel Three-speed circulator with 5 m (non ErP versions) Simple and intuitive digital display Arrangement for climatic thermoregulation (optional external probe) Can be interfaced with the REC 08 Remote Control Panel (optional) IPX5D electrical protection degree Available lower cover for mod. CIS (optional) Optional plumbing fittings, gas and sanitary taps Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Hermann Saunier Duval Condensing Boiler THEMIS CONDENS 24 kW low NOx Methane Complete with Smoke Exhaust Kit cod. 0010028067 - NEWS ErP - Energy class Heating efficiency class B Sanitary efficiency class A Sanitary load profile XL CE identification number PIN CE 0476CQ0908 Heating Fireplace flow rate Qmin/max - 80/60°C kW 13.0/24.0 Rated power Pmin/max - 80/60°C kW 12.5/23.04 Rated power Pmin/max - 50/30°C kW - Efficiency Pmax - 80/60°C - 50/30°C % 96.0 / - Efficiency P30% - 40/30°C % 99.7 Cloak losses - Bruc. On - 80/60°C Pmax/Pmin % 0.1/2.3 Chimney losses - Bruc. On - 80/60°C Pmax/Pmin % 2.2/1.9 Chimney losses - Bruc. Off - heating/DHW % 0.3/0.7 Min/max delivery temperature °C 30/85 Boiler operating pressure min/max bar 0.3/3 Heating expansion vessel - Capacity/preload l/bar 7/0.75 Sanitary Domestic hot water production type Instantaneous ACS quality classification (EN 13203-1) 2 stars Capacity at the hearth min/max - 60°C kW 13.0/24.0 Rated power min/max - 60°C kW 12.3/23.2 Continuous flow rate (∆T= 25K) l/m 13.8 Specific flow rate (∆T = 30K) (EN13203) l/m 11.4 Peak flow rate in 10 minutes (∆T = 30K) l/10 min 114 DHW temperature min/max °C 35/65 DHW storage heat loss kWh/24h - Min/max supply pressure bar -/8 generals Gas category II2H Supply pressure mbar 20 Heating gas flow Pmin/Pmax m3/h 2.66 DHW gas flow rate Pmax m3/h 2.66 Voltage/frequency/intensity V/Hz/A 230/50/0.66 Absorption - Peak/Pmax/Pmin/Stand-by W - / - / 60 / - Heating flue temp. (50-30°C) Pmin °C 51 Sanitary fume temp. (DHW T=50°C) Pmax °C 68 Flue gas heating Pmin/Pmax g/s - CO2 Pmax % 7 Weighted NOx (0% O2) mg/kWh 56.0 Residual head at the fan Pa - IPX 4D electrical protection Weight kg 38 Dimensions 70 cm high, 40 wide and 29.5 deep (24 kW) THEMIS CONDENS Low NOx - NEW Wall-mounted condensing boiler for heating and domestic hot water, for high temperature systems. The new Themis Condens Low NOx is the condensing solution developed by Hermann Saunier Duval to replace traditional wall-mounted boilers combined with radiators that require high inlet temperature values. The main novelty is the low NOx emission burner (class 6) which makes it possible to comply with the ErP regulations in force since November 2018 in the EU. The boiler, which features a renewed casing, is designed to allow easy installation and maximum ease of management, boasting a new extremely intuitive user interface. Themis Condens Low NOx combines the simplicity of the traditional boiler with the efficiency of condensing boilers, guaranteeing the right comfort both in heating and in the production of domestic hot water. It is available in a single model with natural gas supply, power equal to 24 kW in both heating and DHW. Themis Condens Low NOx is a boiler specifically designed for high temperature systems. It was developed to give the right comfort, both for the production of sanitary water and to provide the ideal climate in the rooms. Themis Condens low NOx combines the simplicity of the traditional boiler with the efficiency of condensing boilers. The range consists of a single model with combined production of domestic hot water and heating, it is available in natural gas only . Condensing boiler with a new forced draft atmospheric burner studied and designed to have low NOx emissions , traditional copper exchanger protected with a special aluminum paint and aluminum post-condenser. The boiler features a new high-efficiency pump with high performance and a 7-litre expansion vessel. New burner with low NOx emissions (class 6) Designed for replacement in high temperature systems New casing with reduced dimensions High efficiency pump New simple and intuitive user interface Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

LPG operation with the use of a special conversion kit to be requested from the Authorized Assistance Centre, we recommend contacting the local assistance center before purchasing Technical features Model : Divacondens D Plus F24 Power supply: LPG Energy efficiency Heating energy efficiency class: B Sanitary energy efficiency class: A ACS profile : XL Performance Heat output : 7.5 ~ 25.0 kW Thermal power 80°C ~ 60°C : 7.2 ~ 24.2 kW Thermal power 50°C ~ 30°C : 7.7 ~ 26.2 kW Useful thermal efficiency 80°C ~ 60°C : 96.0% ~ 96.9% Useful thermal efficiency 50°C ~ 30°C : 102.4~ 104.0% NOx emissions : 6 Maximum production of domestic hot water Δt 25°C : 13.9 l/min Maximum production of domestic hot water Δt 30°C : 11.6 l/min Heating working pressure: 0.8 ~ 3 bar Sanitary operating pressure: 9 bar Dimensions and weight Dimensions (LxHxP): 400x680x330 mm Empty weight: 35.0 kg 5 years without worries Extension of the manufacturer's standard warranty to 5 YEARS on Ferroli brand gas condensing boilers of less than 35 kW in the DIVACONDENS and BLUEHELIX series through the local authorized Ferroli technical assistance centre. Wall-mounted boiler Ferroli DIVACONDENS D PLUS Atmospheric wall-mounted condensing boilers, with instantaneous domestic hot water production The simplest solution for a condensing boiler DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. DIVACONDENS D PLUS is offered in a single model for heating and instantaneous production of domestic hot water Product plus > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels > Compact geometry primary exchanger > Instant production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit > Forced draught sealed chamber boiler, with water-cooled atmospheric burner with low NOx emissions > Standard automatic hydraulic by-pass > Minimum polluting emissions, class 6 according to EN 15502-1 > High-efficiency, low-consumption circulator with anti-blocking system by activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote timer control > Simple and complete control panel, display user interface, with setting keys > Robust post-condenser fed by the closed circuit of the primary. The heat exchange with the fumes takes place inside large diameter water passages > Generator with simple and rational operation > ECO function in DHW for greater savings in the period of low use of hot water > Predisposition for solar systems : prearranged for the production of domestic hot water combined with solar panel systems > Place of installation : also for outdoors in a partially protected place down to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center > Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre Boiler control The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. Main components Heat recovery Post-condenser with recovery of latent heat from the combustion fumes and condensate discharge Steel frame Made with high precision automated processes. Incorporates an 8 liter expansion vessel Central heating primary exchanger protected by a non-toxic aluminum coating Low NOx burner Water-cooled low temperature micro flame type. Minimum NOx emissions High efficiency circulator , for heating and exchange with the DHW circuit Domestic hot water exchanger In stainless steel, with copper brazing ECS - Evolved Combustion System Innovative combustion control that guarantees optimal functioning under various thermal load conditions and types of chimney Optimize comfort and savings "ROMEO N" timer control The ROMEO N timer control allows control and setting of the boiler functions directly from the room in which it is installed. Comfort programming is possible on a weekly basis and also includes the 'holiday' function. ROMEO N is available with wired or wireless connection. With ROMEO N you can: Adjust the heating and DHW temperatures Know the operating status of the boiler View the indoor temperature in your home Program the weekly ambient comfort Activating/deactivating the heating function via the telephone (Optional) Smart CONNECT remote control Remote control supplied with the class A+ kit code for home comfort management also from a Smartphone Possibility of managing up to 8 zones using additional room units Connection to the home Wi-Fi network via the supplied RF/Wi-Fi receiver CONNECT APP available for boiler on/off and domestic heating/DHW comfort management remotely via Smartphone (iOS and Android) Maximization of room comfort with modulating regulation of the flow temperature through the Room Climatic Compensation functions differentiated for each zone and External Climatic Compensation via external temperature detectable directly from the internet or from an optional external probe It improves the average seasonal efficiency in space heating by +4%. Weekly time programming in 30-minute intervals via APP CONNECT Operating modes : Off, Holiday, Automatic, Manual Three modifiable temperature levels : Comfort, Economy, Antifreeze By reading the external temperature directly from the internet (or from the optional external probe) the system is able to vary the system temperature according to the external temperature measured on the basis of configurable climatic curves, thus guaranteeing the user maximum room comfort at the change in external climatic conditions. The modulating function of CONNECT allows modulation of the boiler power as the set room temperature value is reached. This improves the quality of comfort by eliminating heat peaks with consequent energy savings Solar circuit integration Sun Easy function DIVACONDENS D PLUS boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and turns on the burner only if necessary. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. Safety and comfort Functions Antifreeze In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by freezing. This function is active with the boiler powered by the gas circuit and under electrical voltage Post-circulation This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function and is active after the burner goes out in heating mode. Sliding temperature operation With the installation of the “External probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user Easy Control The electronic board of DIVACONDENS D PLUS adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO N and CONNECT remote timer controls. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite Product Guarantee : All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. CERTIFIED LPG OPERATION USING A SPECIAL KIT TO BE REQUESTED IN ADVANCE FROM THE AUTHORIZED AREA SERVICE CENTER Ferroli DIVACONDENS D PLUS F24 LOW NOx condensing boiler complete with flue gas exhaust kit WITH RBM DIRT SEPARATOR INCLUDED Energy label specifications according to the European ErP directive Class B heating energy efficiency Sanitary energy efficiency profile XL Class A Performance Heat input Min Max Heating kW kW 7.5 25.0 Thermal power 80°C - 60°C Min Max Heating kW 7.2 24.2 Useful thermal efficiency 30% Pmin % 100.1 Domestic hot water production Δt 25°C Δt 30°C l/min l/min 13.9 11.6 NOx emissions 6 Dimensions WxHxD mm 400x700x330; 35kg DIVACONDENS D PLUS DIVACONDENS D PLUS is the condensing heat generator for traditional heating systems. The tried and tested Ferroli technology in the field of traditional wall mounted boilers has been enriched by increasing the performance of the product in the simplest way, with the use of a robust recuperator which preheats the primary circuit using the residual heat of the exhaust fumes and a new cooled burner with low NOx emissions. Characteristics > Condensing boiler for heating high temperature systems and producing domestic hot water. It is not suitable for combination with direct delivery to systems with low temperature radiant panels > Compact geometry primary exchanger > Instant production of domestic hot water with dedicated plate exchanger > Post-recovery of the latent heat of condensation, in function of pre-heating of the primary circuit > Forced draught sealed chamber boiler, with water-cooled atmospheric burner with low NOx emissions > Standard automatic hydraulic by-pass > Minimum polluting emissions (class 6 according to EN 15502-1) > High efficiency low consumption circulator (ErP - Class A) with anti-blocking system by activation for a few seconds every 24 hours of inactivity > Can be combined with the modulating remote timer control > Simple and complete control panel, display user interface, with setting keys > Robust post-condenser fed by the closed circuit of the primary. The heat exchange with the fumes takes place inside large diameter water passages. > Generator with simple and rational operation > ECO function in DHW for greater savings in the period of low use of hot water > Predisposition for solar systems: prearranged for the production of domestic hot water combined with solar panel systems > Place of installation: also for outdoors in a partially protected place down to -5°C as standard > Certified operation also with propane air (50% air - 50% G31) by means of a specific transformation to be requested from the Authorized Assistance Center > Also works on LPG with the use of a special conversion kit to be requested from the Authorized Assistance Centre Boiler control The DIVACONDENS D PLUS control unit consists of an easy-to-use interface with a backlit display. Using the buttons, it is possible to easily adjust the heating flow temperature, the domestic hot water setpoint, switch the generator on/off or activate the comfort function, monitoring the status of the boiler. The control panel is completed by a traditional pressure gauge which can check the system pressure at any time. The performances Energy classification DHW load profile (maximum flow rate at the corresponding efficiency declared in DHW) Efficiency in the production of domestic hot water FOR COMBINED BOILERS The "climate-energy 20/20/20" package includes ambitious targets for reducing greenhouse gas emissions, of energy consumption as well as the increase in the use of renewable energies, corresponding to a percentage of 20% to be reached by 2020. In this context, the European regulation ErP (Energy Related Products) introduces an energy classification also for water generators hot water for space heating and domestic hot water purposes. This classification translates into an energy label which must necessarily accompany all the products affected by the Regulation, introduced on the market from 26 September 2015. The labeling constitutes an easy guide for the consumer, who can choose - through standardized and objective indications - the product more efficient. In this way, the choice will be the most sparing in terms of consumption for the benefit of the user, but also the most virtuous for energy balances and consequently, for the environment. The most significant parameters indicated on the label are the seasonal efficiency index in heating and efficiency in the eventual production of domestic hot water, according to a scale which, in the case of the single boiler product, ranges from A to G*. Furthermore, for combined boilers, a load profile is indicated corresponding to the DHW flow rate of the appliance measured in a series of typical samplings, guaranteeing at least the declared DHW efficiency. This index is identified with a letter/”size” (S, M …XXL). Solar circuit integration DIVACONDENS D PLUS boasts electronics that simplify integration with thermal solar systems, both with natural and forced circulation. The microprocessor controls the temperature of the water coming from the solar circuit through the domestic hot water sensor and switches on the burner only if necessary. To reach the desired temperature, SUN EASY allows considerable savings even during the coldest seasons, exploiting and integrating even the smallest solar contribution, otherwise lost. In case of insufficient irradiation and therefore a modest pre-heating of the domestic water, the boiler will contribute with the heat necessary to reach the required set point temperature. If the sun and the solar system fulfill their "duty" no integration by the boiler will be necessary, the hot water will be conveyed to the tap, without the need for additional devices, with the mixing of the thermostatic valves. Safety and comfort ANTIFREEZE In the event that the temperature in the boiler drops to 5°C, the burner ignites automatically and the circulator is activated in order to protect the appliance from damage caused by frost. This function is active with the boiler powered by the gas circuit and under electrical voltage. POST-CIRCULATION This function makes it possible to recover all the heat supplied by thermal inertia of the exchanger and transfer it to the heating system, and consequently to the rooms to be heated. This is a timer function (customizable duration) and is active after the burner goes out in heating mode. SLIDING TEMPERATURE OPERATION With the installation of the “external probe” kit it is possible to operate the boiler in sliding temperature. This means that without using the system temperature adjustment keys, the boiler will self-regulate according to the variations in external temperatures. All this translates into energy savings while ensuring maximum comfort for the user. EASY CONTROL The electronic board of DIVACONDENS D PLUS adopts the Opentherm protocol. It allows the integration of other peripheral control units such as, for example, the ROMEO remote timer control. In fact, the Opentherm standard has been specially designed to share the logic and operating algorithms of the boiler with other additional control units. As a digital protocol, it allows total integration between the boiler and the satellite, with full control of the functions from the boiler and similarly from its satellite. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT THE AREA HERMANN ASSISTANCE IN ADVANCE Hermann Saunier Duval Combitek 24-AS/1 low NOx gas boiler complete with methane or LPG fume exhaust kit - News Select the smoke kit in the drop-down menu! Product specifications Condensing Type of installation Wall Type of fuel Methane Manufacturer's warranty (in years) 2 Energy class in heating A Domestic hot water energy class A Rated power (in kW) 24 Instant hot water production Modulation range 1:5 Integrated thermostat No Ideal for N° floors 1 Net weight (in kg) 25.6 Flow (in l/min) 14 Packed product: width (in cm) 36 Packed product: depth (in cm) 49 Packed product: height (in cm) 89 Packed product: weight (in kg) 30.2 COMBITEK The optimal solution for heating and domestic hot water preparation . Excellent value for money, both for new builds and replacements It can be retrofitted into existing heating and hot water supply systems The project has been developed to offer the optimal solution in terms of price , performance and quality . Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less

Open Chamber Boiler Ariston HS X 24 CF Low NOx Methane - NEW Energy efficiency class in heating C Energy class in Sanitary B XL load profile Nominal heat input max/min kw 25.8 / 11.0 Useful thermal power max/min kw 23.2 / 9.8 Nominal heat input max/min (sanitary) PCI 27/11.0 kW Hot water flow rate at ΔT 25º C 14.2 l/min Low NOx emissions < 56 mg/kWh Supply voltage 230 V~ (50 Hz) Electrical protection degree IP X4D Dimensions HxWxD 745x400x315 mm New HS X The new Ariston HS-X boiler leaves behind the traditional room thermostat and can work with internal and external temperature probes. Prepared for thermoregulation. These exclusive Ariston thermoregulation peripherals allow for a further 15% gas saving, offering greater stability at room temperature. Ready for use with solar thermal energy in domestic hot water. Digital multifunction display Continuous modulation high efficiency circulator Predisposition for on-off thermoregulation Predisposition solar systems natural circulation Self-diagnosis system by code Mono-temperature zone management Copper finned primary exchanger Double exchanger technology Integrated minimum pressure switch Cold water inlet and heating return filters Low NOx emissions < 56 mg/kWh Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

NB: IN CASE OF ABSENCE OF THE PRODUCT WE WILL SEND THE SIMILAR MODEL THEMATEK CONDENS Gas Boiler Hermann Saunier Duval SEMIATEK CONDENS 24 AS/1 kW Methane Complete with Smoke Kit - New Select the smoke kit in the drop-down menu! Technical features Model : Semiatek Condens Power : 24 kW Methane gas Heating efficiency class: A Sanitary efficiency class: A Sanitary load profile XL Heating features Rated power Pmin/max - 80/60°C kW 6.0 - 18.3 Efficiency Pmax - 80/60°C - 50/30 °C % 97.2 - 106.4 Sanitary features Rated power min/max - 60°C kW 6.2 - 24.0 Specific flow rate (∆T = 30K) (EN13203) l/min 11.5 generals NOx class - 6 Electrical protection IPX - 5 Absorption - Stand-by / Pmax W 1.7 - 90 Dimensions (HxWxD) mm 626x400x270 Semiatek Condens The optimal solution for heating and domestic hot water preparation. Excellent value for money, both for new builds and replacements It can be retrofitted into existing heating and hot water supply systems Heat exchanger in stainless steel 3 year guarantee The SemiaTek Condens boiler is available in 24 and 28 kW methane power. The most important novelty concerns the renewed primary exchanger , the old one in Al-Si has been replaced by the one in stainless steel which, through a simple adjustment of the gas valve, also allows operation with propane. Innovation also from the point of view of combustion : complete premixing with new fan-push technology where the fan in the new position upstream of the burner guarantees the right ratio between air and gas by applying a proportional pressure value which guarantees the opening of the gas valve without waste. The project has been developed to offer the optimal solution in terms of price , performance and quality . SemiaTek Condens also features a new design of the ultra-compact hydraulic block with new location of the key components, while still maintaining a good level of efficiency, performance and adequate comfort in both heating and domestic hot water production. Characteristics The new design of SemiaTek Condens offers an innovative touch screen interface of extreme simplicity with 6 keys, display with black background and 2 white digits with intermittent ignition, the indication of the boiler status is defined by the intermittent ignition of the icon selected. SemiaTek Condens is compatible with all Hermann Saunier Duval components and accessories already on the market. SemiaTek Condens can also be combined with the MiGo WiFi control unit. The wall-mounted boiler is ready to be managed remotely simply with a smartphone. Ease of installation SemiaTek Condens is very simple to install thanks to its small size - 62.6cm high, 40cm wide and 27cm deep - and low weight. Even the vertical hydraulic connections have been designed to facilitate and speed up installation. For these reasons, it is the ideal solution for replacing old systems. Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase

Read more less