Caldaia a Condensazione Riello Residence HM 35 KIS Low NOx Con Kit Scarico Fumi Metano o Gpl 20205319 Caratteristiche tecniche Modello : Residence HM KIS Potenza nominale ERP: 29 kW Alimentazione : Metano/gpl Efficienza energetica Classe di efficienza energetica stagionale del riscaldamento : A Classe di efficienza energetica del sanitario : A Efficienza energetica stagionale del riscaldamento : 93% Potenza termica utile Potenza termica nominale e a regime di alta temperatura : 29,3 kW Potenza termica nominale e a regime di bassa temperatura : 9,8 kW Efficienza Utile Alla potenza termica nominale e a regime di alta temperatura ** ƞ4 % 87,9 Al 30% potenza termica nominale e a regime di bassa temperatura *** ƞ1 % 97,9. Altre specifiche tecniche Portata termica riscaldamento (max-min) kW 30,0-3,5 Portata termica ACS nominale (max-min) kW 34,9-3,5 Tensione di alimentazione V-Hz 230-50 Grado di protezione IP IPX5D Classe NOx 6  Riscaldamento Pressione-temperatura massima bar-°C 3-90  Pompa: massima prevalenza disponibile(alla portata di 1000 l/h) **** mbar 400 Capacità vaso espansione a menbrana l 9 Dimensioni, peso Dimensioni caldaia (HxPxL) mm 740x275x420  Peso netto kg 30 Residence HM RESIDENCE HM INAUGURA UNA NUOVA GENERAZIONE DI CALDAIE A CONDENSAZIONE, CHE SANCISCE L’IMPEGNO DI RIELLO PER UN’INNOVAZIONE TECNOLOGICA AL SERVIZIO DEL RISPARMIO ENERGETICO E DELLA SOSTENIBILITÀ, OFFRENDO UN COMFORT SEMPRE PIÙ RISPONDENTE ALLE MODERNE ESIGENZE DELL’UTENTE RESIDENCE, tra le gamme più rappresentative dell’offerta Riello in termini di affidabilità e performance, si rinnova profondamente nel design e nella tecnologia per dar vita a RESIDENCE HM. Tante sono le novità di questa nuova caldaia murale a condensazione rispetto alla serie precedente: dall’elevata modulazione 1:10 su tutta la gamma, al nuovo scambiatore di calore in acciaio inox con rinnovato controllo di combustione adattivo, fino al nuovo pannello di controllo touch, per citare le principali.Denominatore comune di tutta la gamma la ricerca tecnologica finalizzata al risparmio energetico per offrire un comfort sempre più elevato: dalla silenziosità alle prestazioni, tante sono le caratteristiche migliorative di RESIDENCE HM, che l’utente non mancherà di apprezzare. La nuova gamma si presenta in una veste estetica completamente rinnovata, dal carattere moderno ed evoluto, che si armonizza con facilità nei diversi contesti residenziali, sia nella sostituzione che nella nuova edilizia. Inoltre come tutte le caldaie Riello di nuova generazione, RESIDENCE HM è orientata al futuro: è infatti predisposta per operare con miscele di gas naturale e idrogeno fino al 20%, contribuendo così a ridurre l’impatto ambientale e le emissioni delle caldaie a condensazione nei prossimi anni. ALTE PRESTAZIONIGrazie all’ampia modulazione 1:10, al nuovo controllo intelligente di combustione ACC e ai rinnovati scambiatori primario e sanitario OTTIMO COMFORT SANITARIOAcqua calda senza oscillazioni ditemperatura, per un comfort ottimale durante i prelievi, con profilo di carico al vertice della categoria.INTERFACCIA TOUCHL’interfaccia di RESIDENCE HM mantiene la semplicità e l’intuitività di utilizzo, innovandosi con una caratterizzante estetica touch. ELEVATA SILENZIOSITÀ RESIDENCE HM si distingue per la silenziosità operativa, che la rende la soluzione ideale per installazione all’interno dell’abitazione. DESIGN COMPATTOLa compattezza, trasversale su tutte le taglie, rende RESIDENCE HM idonea anche per installazione in un pensile. La caldaia è installabile anche a incasso o all’esterno, in luogo parzialmente protetto INSTALLAZIONE E MANUTENZIONE SEMPLIFICATEGrazie al sistema di controllo combustione adattivo ACC, alla compattezza e all’accessibilità frontale ai componenti. TECNOLOGIA AL SERVIZIO DEL COMFORT E DELL’EFFICIENZA ENERGETICA Nuova flangia fumi con collare di sicurezza a rapido serraggio.  Ridotte emissioni di NOx: CLASSE 6 (EN 15502). Ampia modulazione 1:10 su tutta la gamma, per un elevato risparmio energetico. Efficienza stagionale 93%. Nuovo scambiatore in acciaio inox con rinnovato sistema di controllo della combustione ACC Combustion. Vaso di espansione laterale da 9 litri. Scambiatore a piastre ad elevate prestazioni sviluppato da Riello. Nuovo circolatore digitale modulante a basso consumo. Nuovo gruppo idraulico con sequenza di attacchi di tipo DIN, per una sostituzione semplificata. Copertura superiore e mensola inferiore realizzate con nuovi materiali costampati per favorire longevità e resistenza. NUOVO CONTROLLO DI COMBUSTIONE ELETTRONICO ADATTIVORESIDENCE HM è dotata di un nuovo sistema intelligente dicontrollo della combustione ACC (active combustion control), in grado di adattarsi automaticamente al combustibile (metano, GPL, ecc.) senza ricorrere a codici specifici o a kit di trasformazione accessori. Questo innovativo e sofisticato sistema di controllo consente l’auto-regolazione della combustione, eliminando la necessità di taratura iniziale. Il sistema ACC è inoltre in grado di adattare la caldaia ad operare con diverse configurazioni di gas, differenti lunghezze dei tubi e a diverse altitudini (entro i limiti progettuali previsti). Il sistema ACC è in grado inoltre di effettuare autodiagnosi per una combustione sempre sotto controllo, con emissioni costantemente ben inferiori ai limiti imposti dalla normativa. SCAMBIATORE SANITARIO A PIASTRE AD ELEVATE PRESTAZIONILo scambiatore sanitario di RESIDENCE HM “high performance”, sviluppato da Riello, offre un ottimo comfort, unitamente a rapidità di raggiungimento del set point e di stabilità della temperatura durante il prelievo. SILENZIOSITÀ DI FUNZIONAMENTOGrazie anche ai nuovi materiali introdotti, RESIDENCE HM sidistingue per la silenziosità di funzionamento, caratteristica migliorativa (circa il -10%) rispetto alla precedente gamma omonima e particolarmente apprezzabile nel caso di installazione della caldaia all’interno dell’abitazione. Il range di rumorisità si attesta infatti su livelli dai 45 db(A), per il modello 30 KIS, fino a 48 db(A) per il modello 20 IS. FACILITÀ DI INSTALLAZIONE E MANUTENZIONEIl sistema ACC semplifica l’installazione. In fase di accensione la nuova caldaia non necessita di taratura ed è sufficiente selezionare la tipologia di gas combustibile utilizzato dalla caldaia tramite l’interfaccia, se diverso da quello di default (metano). Le dimensioni ridotte e il peso contenuto rendono il prodotto facilmente trasportabile e movimentabile in fase di installazione. L’accessibilità frontale ai componenti rende inoltre il prodotto più semplice da manutenere per il tecnico preposto, velocizzandone i tempi di intervento. INTEGRABILITÀ IN SISTEMI IBRIDIRESIDENCE HM è in grado di integrarsi nei sistemi ibridi Riello multi-energia (gas/ elettricità e rinnovabili), attraverso l’offerta di accessori della piattaforma Hi, Comfort. NUOVA INTERFACCIA DAL DESIGN EVOLUTO E MODERNO RESIDENCE HM è dotata di una nuova interfaccia digitale dal design accattivante, che conferisce a RESIDENCE HM un carattere moderno, in lineacon i canoni estetici attuali. Progettato con una particolare attenzione alla facilità di utilizzo, il pannello di RESIDENCE HM permette di accedere in modo intuitivo a tutte le regolazioni e ai parametri della caldaia e del sistema con un semplice “touch” su sette punti della sua superficie. A conferma dell’operazione avvenuta si genera un “buzzer”, il caratteristico segnale acustico. Anche il display HMI da 2,8’’ è stato concepito all’insegna della semplicità di comunicazione per l’utente, attraverso l’utilizzo di icone che rendono più immediata la comprensione rispetto ai testi. LO SGUARDO AL FUTURO La gamma RESIDENCE HM, come tutte le caldaie Riello di nuova generazione, nasce predisposta per funzionare con miscele di gas naturale e idrogeno - fino a un massimo del 20% - un primo importante contributo verso il processo di decarbonizzazione avviato dall’Unione Europea ROADMAP IDROGENO 100%E c’è di più. Riello punta ora all’utilizzo dell’idrogeno puro come fonte di energia completamente priva di CO2 . Per questo, la nuova gamma RESIDENCE HM è stata testata per operare con la combustione dell’idrogeno al 100% tramite un kit di conversione, al momento in via sviluppo nei nostri laboratori. L’IDROGENO COSTITUISCE IL SISTEMA ENERGETICO SOSTENIBILE DEL FUTURO Disponibilità in enormi quantità Producibilità mediante metodi a basso impatto e in modo sostenibile da fonti rinnovabili, quali l’energia eolica, fotovoltaica e le biomasse Riduzione delle emissioni inquinanti Opportunità di contribuire al processo di decarbonizzazione UNA CALDAIA PER MOLTEPLICI SOLUZIONI LA DISPONIBILITÀ DI UN’AMPIA OFFERTA DI KIT ACCESSORI DEDICATI MOLTIPLICA LE SOLUZIONI IN TERMINI DI APPLICAZIONI INSTALLATIVE DI RESIDENCE HM, UNA CALDAIA VERSATILE, NATA PER RISPONDERE ALLE DIVERSE ESIGENZE IMPIANTISTICHE E DI COMFORT Compattezza, peso ridotto e grado di protezione elettrica IPX5D permettono a RESIDENCE HM di essere installata con facilità non solo all’interno dell’abitazione, ma anche all’esterno (in luogo parzialmente protetto) e a incasso in box. Il prodotto è ideale anche per la sostituzione, favorita dalla disponibilità di kit accessori di conversione, nel caso la caldaia da sostituire non sia Fornita di attacchi DIN Garanzia prodotto : Tutti i prodotti in vendita sul nostro sito sono nuovi ed imballati. La garanzia su questo articolo è 24 mesi dalla data dell'acquisto.

Read more less

Biasi rinNova adaptive 25s low NOx condensing boiler complete with methane or LPG fume exhaust kit Heating/DHW nominal heat input kW 21.0 / 26.0 Heating/DHW minimum heat input kW 3.0 / 3.0 Heating/DHW maximum useful power 60°/80°C * kW 20.7 / 25.6 Heating/DHW minimum useful power 60°/80°C * kW 2.8 / 2.8 Heating/DHW maximum useful power 30°/50°C ** kW 22.8 / 28.2 Heating/DHW minimum useful power 30°/50°C ** kW 3.2 / 3.2 Yield name 60°/80°C * % 98.4 Yield min. 60°/80°C * % 94.0 Yield name 30°/50°C ** % 108.6 Yield min. 30°/50°C ** % 105.2 NOx class 6 Minimum/maximum heating pressure bar 0.3 / 3 Expansion tank capacity (total/useful) l 7 Maximum flow rate (ΔT=25 K) / (ΔT=35 K) l/min 15.4 / 10.7 Specific sanitary flow rate (ΔT=30 K) ***** l/min 12.8 Voltage/Power at nominal heat input V~/ W 230 / 100 Power at minimum thermal capacity W 52 Degree of protection IPX5D Height x Width x Depth mm 700 x 400 x 300 Weight kg 31.5 Boiler water content 2.0 l Code 20312.0221.0 RinNova adaptive The RinNova Adaptive condensing boiler , unlike traditional boilers, allows you to recover energy by condensing the water vapor contained in the exhaust fumes; that is, for the same amount of heat produced, it consumes less gas and furthermore the exhaust fumes contain fewer substances which are harmful to the environment. The materials that compose it and the regulation systems with which it is equipped offer safety, high comfort and energy savings, so as to be able to fully appreciate the advantages of autonomous heating. RinNova Adaptive is the new BIASI model of wall-mounted condensing boiler . It offers excellent performance and high yields that last over time, thanks to the innovative heat exchanger . Simple to use thanks to the digital control panel, with a display designed to communicate with the user easily and comfortably. Technical features Boiler with single circuit primary exchanger in stainless steel, without joints and/or welds, which maintains high efficiency even on older systems New combustion system with patented gas-adaptive technology (Advanced Adaptive Gas Combustion Control – A²GC²) The electronics continuously analyze the combustion (CO2) through the flame signal and intervene by acting on the gas valve and fan, to allow correct combustion in all terms of use. The electronics allow the boiler to be easily adapted to the various types of gas without having to intervene with a mechanical transformation kit Instant production of domestic hot water with dedicated plate exchanger Domestic hot water pre-heating function: faster delivery of domestic hot water User interface with display and multifunction keys for adjusting and setting the parameters Easy to inspect standard by-pass Chimney Protection System: electronic management of fume overheating, guaranteeing maximum protection of the chimney Ducting on flues: particularly suitable for operation in flues that require ducting with high pressure drops Minimum polluting emissions (class VI - EN 15502-1) Sliding temperature operation via optional external probe Low consumption modulating heating pump (ErP Ready - Class A) Digital flame control with three re-ignition attempts in the event of blocking due to lack of flame detection (methane configuration) Removable casing in three pieces for easier maintenance or inspection For SV versions: possibility of setting the maximum power that can be supplied to the external boiler Gas-adaptive technology Less consumption, more efficiency, fewer emissions The innovative Adaptive Gas technology, which all models in the Rinnova line are equipped with, allows the boilers to be adapted in complete autonomy to the different types and qualities of gas. The electrode, in addition to detecting the flame, also detects the characteristics of the gas and automatically adapts the combustion parameters to maintain the maximum level of efficiency, with a consequent reduction in consumption and emissions compared to traditional control systems. The Adaptive gas system makes the boiler ready to operate with any type of gas without transformations. Automatic gas regulation Adaptation to changing gas quality Clean combustion The only model suitable for methane and LPG which allows you to optimize the warehouse In traditional boilers, the combustion values ​​are detected and adjusted only during maintenance, furthermore the composition of the gas network is not always constant and can create operating inefficiencies on boilers without combustion control devices, compromising reliability, savings and the quality of emissions. Thanks to the Gas-Adaptive system, the new condensing boilers electronically control combustion by managing the gas and air supply at best and at all times, automatically adapting the CO2. A "Plastic-FREE" production For a more sustainable environment A fundamental element that guided the entire design phase of the new Rinnova Adaptive boiler is the strong focus on the circular economy. For this we have used components with a higher rate of recyclability, eliminating the use of plastic as much as possible. The plastic group, for example, has been replaced with the brass group, a completely recyclable material. The protective shells of the boiler were made of cardboard and no longer of polystyrene. Furthermore, the front is no longer in plastic but in pressed steel. Thermoregulation Climatic regulation (with optional external probe) and ambient regulation (remote) to allow correct management of the water temperature in order to reduce consumption and consequently a reduction in emissions. By using the climatic regulation, the regulation efficiency also rises, giving greater value to the home. High circulation single coil primary heat exchanger Biasi, introduces the Round heat exchanger in 2017. The great reliability has been demonstrated by adopting it in the Renew Adaptive range. Round is a compact monothermal heat exchanger based on a stainless steel coil with an oval section. The heat exchanger consists of a combustion chamber, condensing area and an insulated metal disc protected with silicone ceramic fiber which separates the two areas. By using a single stainless steel strip to produce the coil, including inlet/outlet fittings, the following benefits are achieved: Accumulation of dirt and debris is avoided The water flow is uniformly distributed and guarantees a homogeneous heat exchange The water flow is constant for a longer life of the product Reduction of pressure drops with optimized circuit The ease of cleaning and the robustness of this exchanger are one of the main strengths of the product since it can be used on new systems but also on old systems in the event of renovations. Round integrates the round flow function in which the water produces a centrifugal cleaning effect on the internal walls of the single coil. The absence of circuits in parallel guarantees an easy "washing" operation of the exchanger and the elimination of any air present in the system circuit. Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

CAUTION Natural gas, LPG and propane air operation without the need for a kit. The transformation takes place thanks to the combustion control by selecting the type of gas from the technical menu. For info, contact the local authorized assistance center in advance ARISTON condensing BOILER ALTEAS ONE NET 35 KW EU METHANE COMPLETE WITH FUME EXHAUST KIT - ErP Technical features Product code: 3301060 Energy label specifications according to the European ErP directive Class A heating energy efficiency (A+ achieved thanks to thermoregulation) Sanitary energy efficiency profile XXL Class A Characteristics of heating/DHW operation: Nominal thermal power kW 31 Annual energy consumption in heating 54 gj Annual electricity consumption 50 kWh Seasonal space heating energy efficiency % 94 Water heating energy efficiency % 86 Sound power level inside 51 dB DHW flow rate ∆T 25 °C (l/min) 19.8 Dimensions 24 kW mm (HxWxD) 745 x 400 x 315 Indoor installation and partially protected places Power supply: methane or LPG Functionality: Connectivity integrated in the boiler HI-Comfort functions AUTO, Comfort, CARE Thermoregulation including CUBE thermostat + external probe Large display, touch interface XtraTech stainless steel heat exchanger General characteristics ONE Series , the new generation of condensing boilers Serie ONE is the new generation of Ariston condensing boilers, studied down to the smallest detail to guarantee maximum performance for a long time. New XTRATECH heat exchanger : Maximum quality. XtraTech is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations. Excellent results, over time. Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort : Innovative functions to satisfy your need ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. ALTEAS ONE NET Top of the range condensing boiler, Italian design and integrated connectivity. It represents the perfect combination of excellent performance and innovative design. The front panel in tempered glass, the HI-tech display and integrated connectivity make Alteas the perfect boiler for exclusive furnishing solutions. The efficiency of the boiler combines with the advantages of the Ariston NET service to control your system remotely, keep consumption under control and have peace of mind thanks to a technician who is always by your side. All via a simple free smartphone app! New XtraTech exchanger in exclusive Ariston stainless steel*, with high head Exchanger passage sections +142% compared to the previous version Tempered and scratch resistant glass panel Large display, touch interface Ignition system, electronic combustion control Gas transformation from the technical menu Class A+ in heating, thanks to the Cube thermostat and external probe included as standard Modulation ratio 1:10 Ariston NET connectivity included in the boiler BusBridgeNet® communication protocol AUTO function, Comfort New CARE function, automatic reminder of ordinary maintenance Internal sound absorbing panels Installation in partially protected places Fumes discharge 80, 60, 50 m Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Chaffoteaux Condensing Boiler mod. NIAGARA ADVANCE 35 C low NOx Complete with Methane Fume exhaust kit Code: 3310627 Power 35 kW Energy class in heating A Energy class in sanitary A Pickup profile XXL Dimensions HxWxD 900 x 600 x 460 mm Technical data Nominal heat input in heating max/min (Hs) Qn 34.5/3.5 kW Max/min DHW nominal heat input (Hs) Qn 38.3/3.9 kW Efficiency at nominal heat input (60/80°C) Hi/Hs 97.5/87.8% Performance stars (dir. 92/42/EEC) **** NOx class 6 Expansion tank capacity 8l Power supply voltage/frequency 230 / 50 V/Hz Degree of protection of the electrical system IP X5D NIAGARA ADVANCE Niagara Advance , a concentrate of performance, comfort and compactness, combines the technology of the new Advance range with two 20-litre boilers to meet the most demanding domestic hot water needs. MAXIMUM PERFORMANCE New single coil primary heat exchanger in stainless steel. Passage sections increased by 142% compared to the previous version. 1 m more head. Seasonal yield at 94%. Class A+ reachable with thermoregulation. Performance certified by the TÜV RHEINLAND Group. MAXIMUM COMFORT Modulation ratio 1:10. Optimized internal silencer. SRA function. Gas transformation with kit included as standard. Ready for Chaffolink connectivity. HEALTHCARE COMFORT 40 liter reserve thanks to two stratified stainless steel inter-accumulators. Permanent availability of domestic hot water even with discharged inter-tanks. Domestic hot water performance ***, maximum level foreseen by the EN 13203 standard. Flow rate up to 19.8 l/min with ΔT = 25ºC. Integrated 2-litre sanitary expansion tank. EASY INSTALLATION Installation in partially protected places. Smoke outlets 80, 60, 50 mm. Intuitive electrical connections. ENERGY SAVING AND RESPECT FOR THE ENVIRONMENT Up to 20% energy savings in combination with Expert Control and the SRA function. Up to 30% energy savings by combining Expert Control, the SRA function, the external probe and the radiant floor. Reduced polluting emissions, NOx class 6. Warranty All products for sale on our site are new and packed. The guarantee on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS BORN WITH METHANE. THEREFORE, THE STANDARD TRANSFORMATION KIT WILL BE SUPPLIED. FOR INFO, CONTACT THE AUTHORIZED AREA ASSISTANCE CENTER IN ADVANCE Ariston condensing boiler CLAS ONE Wi-Fi 35 kW Complimentary Fume Kit LPG Integrated Wi-Fi low NOx ErP Technical features Nominal heat input in heating max/min PCI 28.0 / 3.8 kw Nominal heat input in DHW max/min PC 30.0 / 3.8 kw Combustion efficiency (flue gas) % 98.0 Efficiency at 30% at 30°C PCI % 109.6 NOx class Class 6 Maximum heating pressure 3 bar Expansion vessel capacity l 8 Heating temperature min/max °C 20 / 82 Min/max DHW temperature °C 36 / 60 Instantaneous quantity of hot water ΔT=25°C l/min 17.4 Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 88 Energy class A Energy class in sanitary A XL withdrawal profile Dimensions mm HxWxD 745x400x385 Functionality: / XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head / Class A+ in heating reachable with thermoregulation / Modulation ratio 1:8 / Wifi integrated in the boiler /LCD displays / BusBridgeNet® communication protocol / AUTO function, Comfort / Optimized internal silencer / Installation in partially protected places / Smoke outlet 80, 60, 50 mm CLASS ONE WIFI XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ARISTON CONDENSING BOILER CLAS ONE SYSTEM 35 kW COMPLETE WITH OPTIONAL Wi-Fi FUME KIT - NEW ErP Technical features Product code: 3301032 Energy label specifications according to the European ErP directive Class A heating energy efficiency Combustion and Efficiency: Nominal heat input max/min heating: kW 31.0-5.0 Heating max/min useful heat output: kW 30.2-4.7 Efficiency at nominal heat input (60/80°C): 97.5% Efficiency at 30% (30°C): 109.6% Performance: Heating max/min temperature (high temperature) °C 82-35 Heating max/min temperature (low temperature) °C 45-20 Minimum operating temperature (-5°C with antifreeze kit)**> 0° Characteristics: Total absorbed electric power W 84 Degree of protection of the electrical system IP X5D Dimensions 24 kW mm (HxWxD) 745 x 400 x 385 Installation in partially protected places Power supply: methane CLAS ONE SYSTEM Condensing boiler for heating only, ideal for creating systems (hybrid, solar, boiler with external storage tank). It is built on the basis of the new ONE Series Per4mance System with four technologies that ensure particularly high performance. Durability maximized thanks to the Ariston exclusive XtraTech™ heat exchanger Compact structure for easy installation LCD display Compatible with the CUBE S NET Wi-Fi thermostat which allows connection to the Ariston NET App Compatible with the Ariston NET App for remote control AUTO FUNCTION maximum comfort, efficiency and energy savings based on the automatic analysis of the environmental conditions, connected external devices and required performance. COMFORT FUNCTION speeds up hot water dispensing in two modes: Comfort Plus Mode (always hot water in just 5") and Comfort Mode (hot water for 30' after the last tap). SMALL SIZE small footprint for easy installation. SYSTEM MANAGEMENT new communication protocol set up to guarantee complete management of the system. Product Warranty All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE BOILER IS SUPPLIED WITH METHANE. LPG OPERATION THROUGH ADJUSTMENT BY AN AUTHORIZED SERVICE CENTER. FOR INFO, CONTACT THE IMMERGAS AREA ASSISTANCE IN ADVANCE IMMERGAS VICTRIX 35 TT INTERNAL/EXTERNAL CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Immergas Victrix 35 TT condensing boiler Capacity: 32Kw Useful heating power kW: 32.0 DHW useful power kW: 34.2 Type: snapshot Modulation range: 12 - 100% Hot water production (∆t 30 °C) l/min: 16 , 3 Electrical protection degree IPX: 5D Dimensions (HxWxD): 748x440x255 mm Weight: 33Kg VICTRIX kW TT With VICTRIX kW TT, a generation of boilers is born, destined to offer a great variety of solutions thanks also to the extreme dimensional compactness in just 25 centimeters deep. Designed to comply with the new European Directives ErP and ELD, it makes it easier to reach the high efficiency classes in space heating and in the production of domestic hot water in homes. Approved to operate indoors and outdoors, even in the open by means of a special optional cover kit. The IPX5D degree of electrical protection and the boiler is equipped with standard antifreeze protection down to -5 °C. Electricity saving thanks to the low consumption, class A, modulating circulator. The innovative condensing module guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater resistance to corrosion thanks to the special alloy with which it is made. The modulating circulator has low consumption and the wide modulation range of the appliance from 12 to 100% of the thermal power allows high seasonal yields with a consequent reduction in gas consumption. The new electronic board allows precise control of combustion regardless of the gas used (methane/LPG or propane air) and, via a simple app, allows the management of VICTRIX kW TT also from smartphones, tablets and laptops (starting from January 2016 VICTRIX kW TT can be installed recessed with OMNI CONTAINER frame but also in SOLAR CONTAINER or DOMUS CONTAINER to create GAUDIUM SOLAR ErP or TRIO ErP systems. The built-in installation allows the boiler to be positioned outside in a niche and therefore to recover living space. With VICTRIX kW TT Immergas takes the installation flexibility of condensing boilers even further and offers a great variety of solutions also thanks to the extreme dimensional compactness in just 25 centimeters deep. All boilers can be installed: inside of; built-in with OMNI CONTAINER but also in SOLAR CONTAINER or DOMUS CONTAINER to add products that use solar thermal and heat pumps to the boiler in GAUDIUM SOLAR ErP or TRIO ErP applications outdoors in partially protected places; and today also in the open air with the dedicated cover kit. Thus the possibilities of creating systems that comply with the new European Directives increasingly oriented towards condensing technology to reduce pollution and increase energy savings increase. The eco-friendly VICTRIX kW TT condensing range expresses the best of Immergas technology, offering great performance thanks to the innovations introduced in the product design. Characteristics HIGH HYDRAULIC PERFORMANCE Primary condensing exchanger, made of an Aluminium-Silicon-Magnesium alloy, particularly resistant to corrosion. Designed to have high flow rate and head performance even on old heating systems thanks to the large water passages. This also means a low risk of clogging in the presence of impurities in the system water. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15) WIDE MODULATION RANGE The electronic card reduces running costs thanks to particularly high yields even with low energy absorption, as occurs for example in mid-seasons. In fact, the wide modulation range (from 12% to 100% of the thermal power) guarantees high seasonal yields DESIGNED FOR PROFESSIONALS VICTRIX kW TT, produced on the new highly automated lines in the historic Immergas headquarters in Brescello, is a specific range of products developed on the "Top Tech" platform. It has particular technical devices designed to facilitate the work of professionals such as: • safety valve discharge conveyed into the condensate discharge; • cover casing for the water connections, to better position the boiler in domestic spaces; • direct access to the electrical connection compartment of the main external devices (for example CARV2, external probe, CRONO 7) by simply removing the front aesthetic cover without having to open the product. REDUCTION OF ELECTRIC CONSUMPTION Electricity saving thanks to the low consumption modulating circulator, in class A. The circulator can be set in the operating modes: constant ∆t, proportional head or constant speed. The presence of two NTC probes on the system flow and return allows constant modulation of the boiler operating conditions based on the requests of the heating system with a consequent increase in seasonal efficiency. The electrical consumption of the boiler in stand by is less than 6 W. It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/CE) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for tools that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT. Product Guarantee The warranty on this item is 24 months from the date of purchase.  

Read more less

The boiler will be supplied with methane, by means of a regulation it can be transformed for operation with LPG Technical features Model : ecoTEC Plus VMI 35 CS/1-5 Item code : 0010025188 Power supply: methane or LPG Forced draft sealed chamber Performance Heating power : 4.0 ~ 34.1 kW DHW power : 4.0 ~ 34.1 kW Withdrawal flow rate (ΔT = 30K) : 19.9 l/min Energy efficiency class in heating: A Sanitary energy efficiency class: A Sanitary load profile : XL NOx class : 6 Efficiency at nominal heat input at 50/30°C: 97.7% Domestic hot water temperature adjustment: 35°C ~ 65°C Smoke temperature : 35 ~ 85°C Modulation : 1:9 20-litre stratified kettle Installation data Flue connection diameter: 60/100 mm Possible diameter of flue gases : 60/100 - 80/125 - 80/80 - 60/60 Gas pipe diameter: 12.70 mm (1/2") Hydraulic piping diameter : 19.05 mm (G3/4") Dimensions and weight Dimensions (HxWxD): 720x440x546 mm Weight : 52.3Kg Warranty extension to 7 years Wall-mounted condensing boiler Vaillant ecoTEC plus VMI Unrivaled sanitary comfort with an integrated storage tank Always ecoTEC plus but with an extra hot water reserve The new ecoTEC plus VMI has been renewed to achieve a higher level of efficiency, always guaranteeing maximum sanitary comfort and offering better usability to the customer. The models in the ecoTEC plus VMI range have an etas efficiency of 94% . Combined with a class VI thermoregulation such as vSmart , they reach a system efficiency of 98% and therefore the ErP energy class in heating A+ The system consisting of a boiler with storage tank is simple to assemble : the first step is the installation of the actoSTOR CL wall-mounted storage tank equipped with the relative pipes supplied for domestic water, then the ecoTEC plus VMW wall-mounted boiler is hung on the storage tank . All the necessary material is available within the same packaging. The actoSTOR CL stratification storage tank guarantees the same performance as a 60-litre coil storage tank but with significantly reduced spaces . It is possible, via a parameter in the electronics, to exclude the functionality of the boiler by making the boiler work instantaneously, guaranteeing savings on gas consumption The most significant development of the product is the IoniDetect fuel gas detection system which, in combination with the ADA technology for balancing the fuel gas pressures, provides the most correct air/gas mix necessary in order to obtain the best possible combustion. The IoniDetect combustion technology allows you to use the boiler with a mixture of gas containing up to 20% hydrogen The modulation range has been improved and has been extended to a range up to 1:9 . These innovations brought to the product, skilfully orchestrated by advanced electronics , allow the boiler to fully adapt to the real demands of the heating system and reduce gas and electricity consumption to a minimum. The plus range features a series of improvements which improve the use of the boiler and facilitate the operations of the technician: The new LIN Bus system, internal communication protocol between the components and the new electronics, to quickly resolve component malfunctions, showing the solution to be adopted on the display in real time. The new thermo-hydraulic block with a renewed design and improved performance, always with a view to providing the best possible product, with the highest efficiency ever achieved. The new fully touch user interface, with the new “talking messages”, allow easier interaction between the boiler, technician or user. First ignition free Vaillant guarantees, through the work of its technicians, the free first ignition service on all wall-mounted condensing boilers. Wall-mounted condensing boiler ecoTEC plus VMI The perfect solution for heating and domestic hot water The IoniDetect combustion technology allows the boiler to be used with a gas mixture containing up to 20% hydrogen New design and new touch screen interface Boiler with integrated 20-litre storage tank A new additional 26 kW size is also available High modulation 1:9 Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

Ariston condensing boiler CLAS ONE Wi-Fi 35 kW Complimentary flue gas kit Integrated Wi-Fi low NOx ErP Technical features Nominal heat input in heating max/min PCI 28.0 / 3.8 kw Nominal heat input in DHW max/min PC 30.0 / 3.8 kw Combustion efficiency (flue gas) % 98.0 Efficiency at 30% at 30°C PCI % 109.6 NOx class Class 6 Maximum heating pressure 3 bar Expansion vessel capacity l 8 Heating temperature min/max °C 20 / 82 Min/max DHW temperature °C 36 / 60 Instantaneous quantity of hot water ΔT=25°C l/min 17.4 Supply voltage/frequency V/Hz 230/50 Total absorbed electric power W 88 Energy class A Energy class in sanitary A XL withdrawal profile Dimensions mm HxWxD 745x400x385 Functionality: / XtraTech™ heat exchanger in exclusive Ariston stainless steel, with high head / Class A+ in heating reachable with thermoregulation / Modulation ratio 1:8 / Wifi integrated in the boiler /LCD displays / BusBridgeNet® communication protocol / AUTO function, Comfort / Optimized internal silencer / Installation in partially protected places / Smoke outlet 80, 60, 50 mm CLASS ONE WIFI XtraTech™ is the new exclusive* Ariston stainless steel heat exchanger, the heart of the ONE condensing boilers, developed to guarantee reliability and performance over time. Increased passage sections: +142% compared to the previous exchanger. Higher prevalence, lower risk of clogging, better performance. Every day, as if it were the first. Every single component has been designed to guarantee performance and durability over time: Ariston guarantee, shown in each component. Every single component has been rigorously tested and controlled on the production line. 100% of the boilers are tested again before being shipped to our customers. The best materials have been selected, to work for a long time even in the most critical situations Always connected with Ariston NET Wherever you are, always within reach of your Smartphone. Managing the comfort of your home has never been easier! Wherever you are, you can control the climate in your home using your smartphone. Use only the energy it needs. Easy to manage weekly time programming, directly from the app. Also, choose the savings "leaflet" for a real reduction in bill costs! Technical support always ON. Thanks to the innovative remote control system, the app warns your customer in case of malfunctions. By signing a maintenance contract, the Assistance Center will be able to intervene in the event of breakdowns, even remotely. Customer serenity is at the heart of Ariston NET. Absolute efficiency: Thermoregulation in class A+ The ONE condensing boilers achieve very high seasonal performance and thanks to the thermoregulation they reach class A+! Alteas and Genus ONE are also equipped with the innovative IGNITION system, which makes combustion always perfect thanks to the electronic control. Gas transformation? No problem, from the technical menu in one touch. Total Comfort: Innovative functions to meet your needs ONE is equipped with an innovative set of smart functions to guarantee comfort every day with minimum waste of energy. Auto function: Patented function that allows you to automatically optimize the operation of the boiler, eliminating continuous switching on and off, reducing the stress on the components to a minimum. Comfort function: Hot water without any waiting! Lots of water with minimum energy consumption. Integrated Programming: Weekly hourly programming integrated into Alteas and Genus ONE products. Care function: Automatic reminder of routine maintenance. Product Guarantee All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less

IMMERGAS VICTRIX 35 TT INTERNAL/EXTERNAL CONDENSING COMPLETE WITH FUME EXHAUST KIT - NEW ErP Technical features Immergas Victrix 35 TT condensing boiler Capacity: 32Kw Useful heating power kW: 32.0 DHW useful power kW: 34.2 Type: snapshot Modulation range: 12 - 100% Hot water production (∆t 30 °C) l/min: 16 , 3 Electrical protection degree IPX: 5D Dimensions (HxWxD): 748x440x255 mm Weight: 33Kg VICTRIX kW TT With VICTRIX kW TT, a generation of boilers is born, destined to offer a great variety of solutions thanks also to the extreme dimensional compactness in just 25 centimeters deep. Designed to comply with the new European Directives ErP and ELD, it makes it easier to reach the high efficiency classes in space heating and in the production of domestic hot water in homes. Approved to operate indoors and outdoors, even in the open by means of a special optional cover kit. The IPX5D degree of electrical protection and the boiler is equipped with standard antifreeze protection down to -5 °C. Electricity saving thanks to the low consumption, class A, modulating circulator. The innovative condensing module guarantees high flow rate and head on the heating circuit, low risk of clogging due to any impurities in the system and greater resistance to corrosion thanks to the special alloy with which it is made. The modulating circulator has low consumption and the wide modulation range of the appliance from 12 to 100% of the thermal power allows high seasonal yields with a consequent reduction in gas consumption. The new electronic board allows precise control of combustion regardless of the gas used (methane/LPG or propane air) and, via a simple app, allows the management of VICTRIX kW TT also from smartphones, tablets and laptops (starting from January 2016 VICTRIX kW TT can be installed recessed with OMNI CONTAINER frame but also in SOLAR CONTAINER or DOMUS CONTAINER to create GAUDIUM SOLAR ErP or TRIO ErP systems. The built-in installation allows the boiler to be positioned outside in a niche and therefore to recover living space. With VICTRIX kW TT Immergas takes the installation flexibility of condensing boilers even further and offers a great variety of solutions also thanks to the extreme dimensional compactness in just 25 centimeters deep. All boilers can be installed: inside of; built-in with OMNI CONTAINER but also in SOLAR CONTAINER or DOMUS CONTAINER to add products that use solar thermal and heat pumps to the boiler in GAUDIUM SOLAR ErP or TRIO ErP applications outdoors in partially protected places; and today also in the open air with the dedicated cover kit. Thus the possibilities of creating systems that comply with the new European Directives increasingly oriented towards condensing technology to reduce pollution and increase energy savings increase. The eco-friendly VICTRIX kW TT condensing range expresses the best of Immergas technology, offering great performance thanks to the innovations introduced in the product design. Characteristics HIGH HYDRAULIC PERFORMANCE Primary condensing exchanger, made of an Aluminium-Silicon-Magnesium alloy, particularly resistant to corrosion. Designed to have high flow rate and head performance even on old heating systems thanks to the large water passages. This also means a low risk of clogging in the presence of impurities in the system water. It is important to keep the pH of the heating system filling water between 6.5 and 8.5 with a hardness of 15°F (ref. UNI 8065 - DI 26/06/15) WIDE MODULATION RANGE The electronic card reduces running costs thanks to particularly high yields even with low energy absorption, as occurs for example in mid-seasons. In fact, the wide modulation range (from 12% to 100% of the thermal power) guarantees high seasonal yields DESIGNED FOR PROFESSIONALS VICTRIX kW TT, produced on the new highly automated lines in the historic Immergas headquarters in Brescello, is a specific range of products developed on the "Top Tech" platform. It has particular technical solutions designed to facilitate the work of professionals such as: • safety valve discharge conveyed into the condensate discharge; • cover casing for the water connections, to better position the boiler in domestic spaces; • direct access to the electrical connection compartment of the main external devices (for example CARV2, external probe, CRONO 7) by simply removing the front aesthetic cover without having to open the product. REDUCTION OF ELECTRIC CONSUMPTION Electricity saving thanks to the low consumption, class A, modulating circulator. The circulator can be set in the operating modes: constant ∆t, proportional head or constant speed. The presence of two NTC probes on the system flow and return allows constant modulation of the boiler operating conditions based on the requests of the heating system with a consequent increase in seasonal efficiency. The electrical consumption of the boiler in stand by is less than 6 W. It is a very important directive established by the European Union and at the same time a decisive road that will lead all of Europe to reduce pollution and improve citizens' lives. The ErP directive (2009/125/CE) - the acronym stands for "Energy Related Products" - in fact sets very precise reference points for the manufacture of eco-compatible products and defines the minimum mandatory requirements for energy and environmental performance for tools that consume energy. The goal is to reach the famous 20-20-20 by 2020. This repetition of the number 20 serves to more easily remind everyone of the three central purposes of the legislation: INCREASE THE ENERGY EFFICIENCY OF ENERGY USING MACHINES BY 20% REDUCE EMISSIONS OF CARBON DIOXIDE (CO2 ) INTO THE ATMOSPHERE BY 20% REACH A PERCENTAGE OF RENEWABLE ENERGY ON THE FINAL CONSUMPTION OF 20% Two dates in particular have been established to dictate the timing of the adjustment. From 1 AUGUST 2015 it is mandatory to place appliances equipped with low-consumption circulators on the market. From 26 SEPTEMBER 2015 the ErP and ELD Directives officially come into force with the obligation to place appliances with an energy label on the market. Placing on the market means the first billing by Immergas to the retailer. If the appliance was placed on the market before 1 August/26 September 2015, it can be sold, installed and put into service without time limits. The ErP and ELD provisions are not retroactive ELD DIRECTIVE: EVERYTHING CLEAR ON THE LABEL The European Union has made the new energy labeling system mandatory to allow consumers to immediately understand the level of environmental compatibility of individual products. The Labeling Directive (2010/30/EC) in fact requires that each item subject to the ErP Directive be equipped with a label to highlight not only the energy efficiency class but also other performances such as sound power, use, thermal power . IMMERGAS PARTICIPATES IN THESE ADJUSTMENTS WITH PARTICULAR CONVICTION, AWARE THAT ONLY A MARKET THAT ENCOURAGES HIGHER ENERGY EFFICIENCY TECHNOLOGIES CAN BE RESPECTFUL FOR THE ENVIRONMENT. Product Guarantee The warranty on this item is 24 months from the date of purchase.  

Read more less

Beretta MYNUTE X 35C Low NOx condensing boiler complete with flue gas kit 20163566 Methane - NEW Boiler code 20163566 Seasonal heating energy efficiency class A Energy efficiency class of the sanitary fixture A Declared load profile XL NOx emission class 6 HEATING EXERCISE Heating thermal capacity (max-min) kW 30.00-4.90 Maximum pressure-temperature bar-°C 3 - 90 Expansion tank capacity l 9 HEALTHCARE EXERCISE Nominal DHW heat input (max-min) kW 34.60-4.90 DHW energy efficiency ηwh % 85 DHW production at ∆T= 25°C / 30°C / 35°C l/min 19.8/16.5/14.2 CONNECTIONS Heating inlet - outlet Ø 3/4” DHW inlet - outlet Ø 1/2” Gas inlet Ø 3/4” DIMENSIONS, WEIGHT Boiler dimensions (HxPxL) mm 740x420x275; 37 kgs MYNUTE X BERETTA PRESENTS MYNUTE X, THE NEW RANGE OF CONDENSING BOILERS, WITH MANY INNOVATIVE AND ADVANTAGEOUS FEATURES From the primary exchanger in stainless steel to the modern electronic interface, there are numerous new elements that distinguish MYNUTE X in the Beretta offer. The new condensing range, with its 5 models from 20 to 35 kW, with "combined" and "heating only" versions, meets every need for residential comfort. High efficiency, low consumption and ease of installation make MYNUTE X the winning choice, both for new homes and for the replacement market. With MYNUTE X, the novelty of the project merges with Beretta's tradition of excellence, matured in almost half a century of experience in the home comfort sector. Its aesthetics, in line with the Beretta style of the latest generation products, easily integrates into any living context, thanks also to its compactness and installation flexibility. NEW DIGITAL INTERFACE MYNUTE X is equipped with a modern and user-friendly control panel, elegantly covered by a door that lets you glimpse the light of its "green gem", the LED light bar that signals its current operating status. Through a modern backlit LCD display, which communicates with the user through icons and scrolling texts (multilingual), it is possible to access the functions of MYNUTE X. Through 7 silk-screened operating keys, it is possible to navigate the panel in a simple and intuitive way, accessing to the settings and parameterizations of the boiler and the system. MYNUTE X FEATURES MANAGEMENT OF UP TO 2 HYDRAULIC CIRCUITS, HIGH AND/OR LOW TEMPERATURE, THROUGH SPECIFIC PREHEATING ACCESSORIES PREHEATING ACTIVATION TO REDUCE DOMESTIC HOT WATER WAITING TIMES CLOCK FUNCTION WEEKLY PROGRAMMING INTEGRATED IN THE DISPLAY POSSIBILITY OF CONNECTION WITH DOMESTIC HOT WATER TANK (R MODELS) Technology and benefits NEW PRIMARY EXCHANGER IN STAINLESS STEEL THE NEW MYNUTE X EXCHANGER IS MADE OF STAINLESS STEEL, WITH A HIGH SECTION SMOOTH PIPE TO OFFER THE BEST EFFICIENCY AND CLEANLINESS OVER TIME. In addition to the high resistance to the corrosive action of acid condensate, AISI 304 L stainless steel reduces the internal formation of oxides and other electrochemical phenomena typical of installation on old systems. The single wound coil geometry (hydraulic circuit in series) offers a constant flow rate in all sections of the exchanger and intrinsically limits clogging phenomena. Front access facilitates periodic maintenance and cleaning of the combustion chamber. INTEGRATED CLAP MYNUTE X is C10 * approved (formerly 3CEp approved), integrating the non-return valve (clapet) as standard on all models, which makes it "ready to install" in case of installations in pressurized collective flues, for which the non-return valve is a mandatory device. The non-return valve is a specific device which allows the combustion fumes to flow through the ducts in only one direction, i.e. from the burner to the flue gas outlet. Its function is therefore to prevent the fumes from returning to the combustion chamber, compromising the correct functioning of the boiler. This could happen for various reasons, for example in the event of overpressure in the duct of a collective flue system. The non-return valve is generally supplied as a specific optional kit, to be installed at the flue outlet of a boiler in the case of C10 type collective exhausts. In MYNUTE X the non-return valve is positioned inside the boiler (see detail), which translates into quick installation and cost reduction. HYBRID READY MYNUTE X is a HYBRID READY solution. The boiler was born within the offer of HYBRID READY products, which make up the new hybrid technology system conceived and developed in the Beretta Research Laboratories. This system, created to meet the current and future integration and management needs of the various energy sources (Gas/Electricity/Renewables), also includes the most innovative methods of energy accumulation and distribution. Characteristics INNOVATIVE STAINLESS STEEL CONDENSING EXCHANGER WITH FRONT ACCESS WIDE MODULATION RANGE (UP TO 1:8) LOW CONSUMPTION MODULATING CIRCULATOR (EEI ≤ 0.20), 6 m EQUIPPED WITH STANDARD FUME CLAP (CHECK VALVE) AND C(10) APPROVED.* LOW POLLUTANT EMISSIONS: CLASS 6 (UNI EN 15502) MYNUTE X IS HYBRID READY: IT WAS BORN TO BE INTEGRATED IN BERETTA MULTI-ENERGY SYSTEMS THROUGH THE HYBRID REC 10H AND THE HYBRID CONNECTS, AVAILABLE AS ACCESSORIES INSTALLATION FLEXIBILITY: INDOOR, OUTDOOR** AND RECESSED*** INSTALLATION (IN A PARTIALLY PROTECTED PLACE) CLICK-FIT FLUE CONNECTION: FAST AND SAFE, WITHOUT THE NEED OF AN EXTERNAL COLLAR ANTIFREEZE RESISTANCE KIT, HYDRAULIC CONNECTIONS AND EXTERNAL PROBE AVAILABLE AS ACCESSORIES ELECTRICAL PROTECTION DEGREE IPX5D SUPPLIED "DOUBLE T" TEMPLATE COMPATIBLE WITH HYBRID CONNECTORS FOR THE MANAGEMENT OF UP TO TWO SYSTEM ZONES FOR GAS CONVERTING, PLEASE CONTACT AUTHORIZED BERETTA TECHNICAL ASSISTANCE CENTERS COMPATIBLE WITH BeSMART WIFI COMFORT CONTROL AS THERMOSTAT (OTBUS COMMUNICATION), ALLOWING THE MOST ADVANCED FUNCTIONS POSSIBILITY OF INTUBATING FLUES WITH THE SPECIFIC FLUE IN PP Ø60 AND Ø50 Product Warranty The warranty on this item is 24 months from the date of purchase.

Read more less

ATTENTION THE PRODUCT IS MADE TO ORDER NB The boiler will be supplied with methane. For operation with LPG or propane air, contact the local authorized assistance center in advance. Technical features Model : LUNA STYLE 1.35 Code: A7754008 Heating nominal heat input: 33 kW Power supply: methane Specifications Energy efficiency according to the European ErP directive Heating Energy Efficiency Class: A Seasonal space heating energy efficiency ŋs: 94 % Useful efficiency at 30% thermal power. name and low temperature regime. **ŋ1: 98.9 Useful efficiency (pci) at 30% - return temperature 30°C: 109.8% Useful efficiency (pci) intermediate - average temperature 70°C: 98.4% Dimensions and weight Dimensions (hxwxd): 763x450x334 mm Net weight: 32kg Description Backlit color control panel, icons for parameter display, clear descriptions via large text display, adjustment knob and menu selection keys Wide modulation range 1:10 (1:6 mod. 1.12) greater efficiency and silence GAC (gas adaptive control): automatic combustion control Power set: heating power adjustment according to project data Hydraulic group in brass Connection to pressurized collective flues Natural gas boilers convertible to LPG and propane air (conversion kit not required) Antifreeze function and IPX5D degree of protection Operation with a mixture composed of up to 20% hydrogen Product Guarantee: All products for sale on our site are new and packed. The warranty on this item is 24 months from the date of purchase.

Read more less